Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Construction
Sub Categories:
   Equipment & Services
   Engineering Services
   Hardware
   Lighting Products
   Roofing Materials
   Maintenance & Repair Supplies
   Concrete Supplies & Services
   Tools - Hand / Power
   Millwork - Doors / Windows
   Materials & Supplies
   Architectural Products & Services
   Compact Equipment
   Lift & Concrete Placement
   Paving Materials & Equipment
   Underground Equipment
   Light Equipment
   Earthmoving
Click on Company ID to View Full Details
Company ID: 28698 - Click Here for Full DetailsUpdated
Product Lines:
US EPA Tested, National & International Award Winning, Value Added Pretreatment/Conversion Coating which Completely Prepares any type of Metal (Ferrous & Non-Ferrous) for Welding, Priming, Painting, Powder Coating, etc.

Eliminates Blasting of New Metal Surface. Years of indoor Rust Protection. 
 
Target Markets:
OEM, Metal Fab, Paint & Body, Car Parts Manufacturer, Stamping, Machine Shop, Injection Molding, Welding, Media Blasting, DOT, Military, Marina, Shipbuilding, Small Powder Coating Job Shops, Construction, Steel Mill, Farm Supply, Utility, Railroad, Power Plant, Retail Chains, Mining, Oil & Gas, etc. 
 
Sales Opportunity:
USA based company. Product developed & Made in USA. Complete "Green Technology". Product performs multiple jobs (8 products job in one step). Good commission rate. Direct sale and through distributors in USA and overseas. Huge market in any industry with no competition. Selling since 1998.

It is the only Conversion Coating, which works at room temperature without rinsing, works on any Ferrous & Non-ferrous metal. Complete metal surface preparation in one step. Eliminates blasting of new metal before Priming/Painting, Powder coating, etc. De-scaling mill scale. Completely eliminates Rusting problems, Welding & Adhesion failures. Increases weld strength considerably in steel & Anti-spatter. Eliminates a lot of steps from traditional processes, saving a lot of labor, time & cost. No EPA or OSHA.

Zero Welding & Zero Paint Adhesion failure since 1998. Zero Re-Work. No Waste. Indefinite Shelf Life.

Imagine a product that reduces labor, time & cost so much, that you get more than your money back after use! In other words, Payback is immediate (with more money back) after use.

Our product is used by major companies, such as DOT, Military Metal Fabrication, Aerospace, Automotive Aftermarket, Mining, Boat manufacturing etc. It has been used by Lockheed Martin, Goodrich Aerospace, Bechtel International, DOT, TENN, SpaceX (Rocket & Spacecraft manufacturer), etc.

Good Commission. Complete Training & Tech. Support will be provided along with Product Sample, Brochure
 
Company ID: 105552 - Click Here for Full DetailsUpdated
Product Lines:
Vinyl Windows, Entry Doors, Patio Doors.

State of the Art Technology used in manufacturing the most Energy Efficient and Structurally Sound products on the market today. Completely manufactured and assembled at our facility to ensure Superior Quality Control and Serviceability. 
 
Target Markets:
Retail, Developers, Contractors, Architects, D.I.Y. A diverse target market which allows for Multiple Layers of Opportunity to Generate Maximum Earnings Potential. 
 
Sales Opportunity:
Opportunity to be the first agent to promote an exclusive Canadian brand in the U.S. market. With current exchange rates and elevated Canadian design and fabrication standards we can offer a superior window at the same price as lower grade windows. A win-win situation!

Our mission is to offer our customers the most energy efficient product on the market to help them save on energy cost for years to come. We are recognized throughout Canada and parts of the United States for our superior design and unprecedented quality. Our state of the art technology allows us to produce windows and doors that meet and exceed NFRC, Energy Star, AAMA, and CSA requirements.

With over 25 years of experience, our dedicated team of professionals are constantly looking for new technologies to make our windows and doors more energy efficient and environmentally friendly. Our automated manufacturing capabilities enable us to deliver products that are in great demand with respect to builders, architects and renovators.

Our wide range of products, multiple accessories and option choices are simply the icing on the cake. We have an international shipping and distribution system in place that allows for regular and overnight shipping if required. If you are looking to add windows to your product line or simply not happy with your current provider, give us a chance to show you the Weather Seal difference. Tired of talking to machines! We pride ourselves on communication and true customer serv
 
Company ID: 102750 - Click Here for Full DetailsUpdated
Product Lines:
We Specializes in Very High Quality Gasoline, Diesel, and Marine Fuel Additives.Sold in bulk 55 gallon drums.

We also Specialize in website design,website videos,custom Logo`s and banners,support & IT including computers & viruses by remote,commercials, video scripts, Photoshop editing. 
 
Target Markets:
Major Terminals Distributors, Trucking Companies, Power Generation Plants, Tug Boat Companies, Heavy Construction Companies, Major Fuel Additives Distributor for Retail, City, State, and National Procurement.

Website design for small and large businesses as well as individuals. 
 
Sales Opportunity:
If you are aggressive and have the resources to connect with the client base that we target, we very much would like to speak you concerning representing our product line of fuel additives. The IT and Website Department also welcomes you in that area of of Business.It does not matter where you are located as long as you can sell the products. We will pay you a very good commission on both our Fuel Additive or presenting our Website and IT Support side of the business.Which ever side of the Business you are working with.You will also get paid on recurring business as well.

Our market area is international and national. We are one of the only ones that reduce the emissions on ocean ships and tug boats that give us a huge market advantage. Our ratio is 1 gallon to 1,200 gallons on gas and diesel. Then one to 1,000 gallons on bunker fuel. While completely cleaning up the fuel engines. I will give more details one on one.

Thank You.
 
Company ID: 105239 - Click Here for Full DetailsUpdated
Product Lines:
We specialize in Thick, Heavy & Viscous Liquid Pumping Equipment, Accessories and Supplies. Automatic Lubrication Systems, Oil Pumps, Grease Pumps, Adhesive Pumps, Mastics, Resins and more.

Brand names include: Graco, Lincoln, OPW, Samoa, Yamada & Binks/Devilbiss Industrial Finishing Equipment. 
 
Target Markets:
Manufacturing, Off & On Road Equipment, Mining, Oil & Gas, Chemical, Process, Maintenance & Repair Organizations, Industrial Finishing, etc. Any company that uses fluids in their business activities. 
 
Sales Opportunity:
51 year old fluid handling equipment provider outside of Chicago looking for qualified sales representatives to help us continue to grow. Ideal candidates are already established with a book of business in the fluids industry such as lubricants, coatings, adhesives, resins, mastics, or similar products.

Recently started a division offering 3D printing filaments & printers to schools, manufacturing and other industries. Exploding marketplace & there are opportunities everywhere if you look for them. Huge growth potential in the coming years which is available to the right candidate.

Let us compliment your business with a unique profit based compensation package that could exceed six figures for the right individual. Residual earning potential too! Help us write the story of our next 50 years & establish your legacy to boot!
 
Company ID: 107159 - Click Here for Full DetailsNew Profile
Product Lines:
We manufacture custom cabinets in an unlimited variety of designs, materials and finishes for residential use. The cabinets are both traditional framed inset or full access (frameless). They are precision manufactured in our modern facility by a highly skilled workforce. 
 
Target Markets:
Our product is sold primarily to high end Kitchen/Bath retailers, interior designers, architects and up market design/build firms. 
 
Sales Opportunity:
This is a unique opportunity to enter the high end residential cabinet/millwork market. We have three decades of experience in serving this market and can offer exclusive territory. While our business has concentrated in serving the northeast US in recent years there are no impediments to expansion to other regions of the country. We back-up our reps and customers with a responsive inside sales group that provides design support and quoting. Samples and literature are provided to our reps as needed and our management team is always available to reps to make on sight calls when helpful. Our products are in demand because of our ability to meet the most rigorous requirements of the market. Our commission structure is traditionally 8% of funds collected.
 
Company ID: 107138 - Click Here for Full DetailsNew Profile
Product Lines:
Manufacture a wide range of Easy-To-Sell All-Natural Eco-Friendly animal repellents. We produce great smelling products, proven formulas, competitive pricing store owners are eager to stock. 
 
Target Markets:
Lawn and garden centers, hardware stores, nursery stores, farmers' co-op, golf courses, any brick and mortar willing to carry animal repellents. Universities, schools, municipalities, counties, resorts, hotels, HOAs, condo associations, Federal and State Governments, and landscape contractors. 
 
Sales Opportunity:
This is an excellent opportunity to get in on the ground floor of a company that is prepped to explode. We offer 10% commission of the selling price. This is a very easy to sell product and we will train you. When you sign up to be a sales representative, you will receive your sales kit and everything needed to complete the sale.

All sales are currently handled from inside and we are looking to form long lasting relationships with outside manufacturers reps in all territories across the United States. We are family owned and operated and are willing to travel/meet customers to discuss opportunities.
 
Company ID: 101651 - Click Here for Full DetailsUpdated
Product Lines:
LED Driver, Power Supplies for Lighting, Lighting Ballasts, LED Ballasts, Step Down Transformers, LED Tubes, LED Lamps, Color Tuning Lamps, LED modules, LED Hibay.

Our LED Driver is most Innovative in the Industry with Functions that are Unique. We also have Price Competitive LED Driver Lines. 
 
Target Markets:
Lighting Fixture Manufacturer, Lighting Distributors. 
 
Sales Opportunity:
We have been selling succesfully to major lighting manufacturers in United States. Our product has been well tested by the market. We are looking for manufacturing rep to promote our LED driver to more lighting fixture manufacturers and distributions in States. We offer unique product at affordable cost.
 
Company ID: 106267 - Click Here for Full DetailsUpdated
Product Lines:
We Carry a Wide Range of LED Lighting for Commercial and Residential.

LED Tube Lights, LED Bulbs, LED Recessed Down Lighting, LED Street Lights, LED Flood Lights, Corn Bulbs. All our Products are UL Listed and 3-5 years Warranty on them. 
 
Target Markets:
Wholesalers, Electrical Contractors, Construction Contractors, Building Interior Contractors, Motel and Hotel Industry, and End-Users. 
 
Sales Opportunity:
We are basically importer of our own brand and we have warehouse stock up on all product and we do have showroom also Garnted products with competitive price range. We love to work as a family and believe in long term relationship. We are looking for commission based sales rep for our product. Commission is approximately between 10-15% we can sit and talk about it.
 
Company ID: 107098 - Click Here for Full DetailsNew Profile
Product Lines:
Metal bar/billet shears for the forging and mass production industries. We are the only company that shears metal bars based on our original patented tool units. These units are then assembled into economical H-frame presses to form economical shears. See video on our website. 
 
Target Markets:
Forging mfrs for auto/trucks, aircraft/aerospace, bolts/fasteners, agriculture/mining, oil/gas, valves/fittings, etc. also metal suppliers,
construction angles. 
 
Sales Opportunity:
Folam bar/billet shears produce non shock, quality square faced cut bars (required in the forging industry)without scrap, costly blade replacements as with saws and in greater speed/quantities at prices comparable to saws.
 
Company ID: 107075 - Click Here for Full DetailsUpdated
Product Lines:
LED lighting fixtures for street, areas, parking lots, garages, workshops, playgrounds, warehouses, any indoor and outdoor places,with powers from 20W ~ 900W 
 
Target Markets:
Electric distributors, contractors, municipalities, government bodies, commercial entities, etc. 
 
Sales Opportunity:
As an professional LED luminaries manufacture, we use the top brand LED chips and drivers for our products, made with carefully crafted housings, under strict quality control measures, our products are outstanding in the industry. We have inventories in CA and LA to offer fast delivery, we have engineers to customize the design, we run photometric proposals for clients to optimize the lighting output, we respond quickly to customer requirements.
We offer generous commission to reps, plus year end bonus.
Arrlux company and products details are available on youtube.
 
Company ID: 106890 - Click Here for Full DetailsUpdated
Product Lines:
As a glass fabrication company offers different lines of glass to our clients:
• Laminated Glass
• Fabricated Glass
• Insulated Glass
• Painted Glass
• Mirror

In order to approach potential customers the new member of the Sales Team will communicate our capabilities, processes and procedures. 
 
Target Markets:
After years success in the U.S. market we are looking to expand our growth further . Weare currently seeking experienced Independent Sales Agents, to cover both the insulated Glass (IG) and OEM/Furniture fabrication markets. 
 
Sales Opportunity:
As a Glass Fabrication Company has a passion for delivering world class products and customer service through enthusiastic, resourceful, innovative people dedicating to winning in a team oriented environment. Our vision is to work with the best and brightest who believe in our values of collaboration, process excellence, customer focus, engagement, agility, continuous improvement and openness to change.

To be a successful Sales Partner you will have:

• Extensive sales and account management experience
• Successfully identified new markets and potential development for profitable sales
• Extensive experience building and maintain long lasting client/customer relationships
• Provided support to clients and customers to ensure satisfaction and expectations are met
• Excellent organizational skills with exceptional attention to detail
• Creative problem solving and troubleshooting abilities
• First-rate computer and mobile technology skills
• A clean driving record and appropriate vehicle

If you want to be part of a growing organization that embraces an entrepreneurial spirit and an unwavering desire to succeed, we would like to hear from you. Please forward you resume, Line Card and preferred operating territory.
 
Company ID: 107076 - Click Here for Full Details
Product Lines:
Primed, Painted and Veneer Millwork 
 
Target Markets:
One and two step distributors, Multi-Family Contractors and Large Retailers 
 
Sales Opportunity:
For nearly 50 years, Lianga Pacific, has been producing fine quality wood products for the millwork industry. Lianga Pacific, is a leading manufacturer of wood and prefinished mouldings, serving the construction industry with the highest quality interior millwork and custom moulding products.
 
Company ID: 93703 - Click Here for Full Details
Product Lines:
World-Leading Filterless Air Purifiers from Finland.

#1 in Power/Efficiency, Energy Savings and Economy, rescuing health and even lives. Portable Models serve Medical, Commercial, Residential Applications. Large In-Line Models fit in pre-existing ventilation ahead of HVAC equipment. 
 
Target Markets:
Our Independent Agents choose their own Area Targets. No Territorial Limitations. Hospitals, Senior Living Facilities, Doctor and Dental offices/labs, and Commercial-Industrial facilities of all kinds are prime targets. Many others. We even seek Reps to approach Coal-Powered Plants. 
 
Sales Opportunity:
Stunning but true: because our Independent Agents (Full or Part-Time) are 100% Commission-based and our products are big-ticket items, we offer with effective agent training an income scenario involving not just 5 or 6 figures, but 7 figures and beyond. For a diligent professional with steady zeal and conviction who reaches their chosen market(s) with our new and mind-boggling air purification technology (which few people know about yet), there is literally no limit to the potential commission income he or she can earn.

As a new Independent Agent (15% commission/portables), you study our company training materials and 2 websites to enhance your passion for our unrivaled remedy for modern society's harmful indoor air environments.

Optional: Agent purchase of a personal demo model for greater sales effectiveness.
 
Company ID: 88189 - Click Here for Full Details
Product Lines:
100% Solid Stainless Steel Faucets and Showers, Showerheads, Stainless Steel Parts, and Accessories.

100% Lead-Free, Rust Resistant, and Corrosion Free. Durable, Health & Green oriented, modern, and unique designs. 
 
Target Markets:
Hotels, Public Facilities, Builders, Designers, Distributors, and Chain Department Stores and Retailers, Home Fixture and Plumbing Product Dealers and Distributors, Kitchen and Bath Specialty Showrooms, Wholesalers. 
 
Sales Opportunity:
We are looking for experienced and aggressive Sales Reps in different geographic areas in North America to represent our unique product line of solid stainless steel faucets and shower heads. Our products are made with 100% stainless steel 304 with single cast technology. They are truly innovative, green, healthy and durable, 100% recyclable, and eco-friendly. We offer great commission rate and bonuses for our sales reps. We're especially looking for Sales Reps. who have established accounts with hotel chains, local distributors, major retailers, and department stores.
 
Company ID: 106080 - Click Here for Full Details
Product Lines:
Molded Rubber Parts, Standard and Custom Profile Rubber Extrusions, Spliced Parts, Rubber Mats and Matting.

We work in tandem with our customers to ensure the product will meet their specific needs, whatever the application. 
 
Target Markets:
OEMs, Engineers, Specifiers, Contractors, MROs.

WARCO BILTRITE’s chemists and production experts participate from initial design consultation through formulation, prototyping and testing. WARCO BILTRITE's expansive capabilities guarantee optimum productivity. 
 
Sales Opportunity:
WARCO BILTRITE has been manufacturing quality rubber products for industry and the Military for over 100 years. With two strategically located US based manufacturing and distribution facilities, in-house R&D and testing laboratories and thousands of catalogued compounds, the company is equipped to manufacture rubber products designed to meet the specifications and requirements of an exhaustive array of applications.

A wide range and unique combination of manufacturing processes and capabilities provide a "one-stop-shop" for our customers' rubber needs.

We offer tool design assistance to jump start production and maintain a large variety of presses to suit each job's unique requirements. The extrusion area produces custom rubber profiles and a variety of custom shapes including cable jacketing, O-ring cord, tubing, rubber seals, squares, and rectangles in a wide array of sizes. Splicing personnel are experts in creating high-quality spliced products an endless variety of shapes.

We take pride in continually making innovations in our processes, equipment and materials to bring a quality, conforming product to our customers at a globally competitive price.

We manufacture a broad range of elastomeric products for the construction industry and other specialty applications. Our capabilities start with decades of experience in assisting customers with the understanding of high performance rubber product concepts.
 
Company ID: 106982 - Click Here for Full Details
Product Lines:
Powder Coating is a Service Both for Retail and Commercial Customers.Large powder coating jobs needed.

It can be Applied to Any Ferrous Metals where 100% Coverage is Preferred. Powder Coating Provides a Greater Depth of Color and Durability than Normal Coatings. 
 
Target Markets:
Sales are to commercial and retail customers for Automotive, Aviation, Marine, Construction, Industrial, Oilfield, Hobbies, Agriculture, Medical, Dental, Manufacturing, Sports, Architectural, and Engineering. 
 
Sales Opportunity:
Powder coating is an under serviced market with unlimited potential as its service is not commonly advertised, instead relying on word of mouth. We are a solid business and have been in business since 1998 and have earned a reputation for providing a superior service standing behind our work. We have the largest facility south of San Antonio/Houston and are capable of both batch production as well a conveyor line for larger quantities. Currently, we have no reps so support would be dependent on the need required. Just like support, commissions will be determined prior to job offer.
 
Company ID: 107033 - Click Here for Full Details
Product Lines:
New patented insulating house wrap, thinnest insulator in the world. 1.5 mil. R-6 house wrap. increases R-value by 29-47%. 
 
Target Markets:
Lumber yards, siding companies, contractors, roofing suppliers, etc.... 
 
Sales Opportunity:
This is a new revolutionary patented product, thinnest insulator in the world. Energy savings is one the most important topics in modern building today! By just wrapping a building project the builder or home owner can achieve 29-47% more R-value in the walls. Territories will fill quickly, so respond immediately!
 
Company ID: 106887 - Click Here for Full Details
Product Lines:
We Specialize in Engineering Solutions, Machined Parts, Aftermarket Parts, Fabrication Assemblies. 
 
Target Markets:
Water, Wastewater, Vineyards, Brewery’s, Restaurants, Structural Steel, Welded Assemblies, Specialty Machining, Engineering Analysis, Equipment Design, and Manufacturing. 
 
Sales Opportunity:
We do just about any kind of metal fabrication and machining and aftermarket parts. From small parts to big structures. If you can sell it then we can make it.
 
Company ID: 90725 - Click Here for Full Details
Product Lines:
Our company Manufactures a hi-tech Line of 100% solid-state, Ultra-Efficient DC Power Management Devices, 100 to 600 amps, 12 and 24 volts. High Current Battery Isolators, Solid State Relays, Low-Voltage Disconnects, OR'ing Diodes, and Precision Circuit Breakers. 
 
Target Markets:
OEM's, Service Fleets, Fire Engine MFG & end-users, Ambulance, First Responders, Motor Coach & RV MFG and repair facilities, Military and sub-contractors, Marine and boating manufacturers, Aerospace, Battery Users, and Resellers, Vehicle Upfitters, Photovoltaic, Mining, Oil service companies. 
 
Sales Opportunity:
Our devices and technology are truly unique with both National and International patents. We have established an outstanding reputation with marquee companies for supplying high performance devices they cannot purchase anywhere else on the planet. Our products are mature and well-vetted across many platforms so as a rep, you're not risking your reputation on a new and untested technology.

What you are doing is introducing your existing customers to a product line where performance and reliability are not compromised as a function of value engineering. You are introducing them to devices built with flexibility in mind. You are introducing them to devices designed to improve the health of their electrical system, increase battery longevity, and replace mechanical switches with solid state options for improved performance.

Return on investment is of paramount importance and we are acutely aware of that. We are a lean organization based in San Diego and we're actively seeking to partner with individuals or organizations that have established relationships with manufacturers, military sub-contractors, resellers, and engineering firms to assist in driving sales in markets where our devices can excel.

As a partner, we're looking for motivated entities familiar with DC electrical systems. Understanding of battery isolators (aka: rectifiers or diodes), mechanical relays (solenoids), and battery systems. Partner support and commission structure to be mutually beneficial.
 
Company ID: 89735 - Click Here for Full Details
Product Lines:
Our Company Manufactures a Complete Line of Decorative Concrete Products.

Integral Color Pigments, Granular Pigments, and Dispensing Equipment, Color Hardeners, Release Powders, Stains, Dyes, Sealers, Imprinting Tools, Micro-Topping, and Stampable Overlays and Polishing Systems. 
 
Target Markets:
Concrete Construction supply Houses and distributors and Dealers, Ready-Mix and Precast Facilities, Architects, and other Wholesale Opportunities. 
 
Sales Opportunity:
We are a growing brand within the decorative concrete industry. We are a full line manufacturer with a nationwide reach. Innotech is a family brand of Chromascape. A family owned company, with both the desire and resources to grow. We offer complete hands on training, field support, as well as, architectural support of our full line of decorative concrete products. We offer a 10% sales commission.
 
Company ID: 101206 - Click Here for Full Details
Product Lines:
Our Products include a Tremendous List of Energy-Efficient Green Technology Products from Induction Lighting, LED, and Plasma Lighting.

We have Retrofit Kits for Induction and LED Lighting both with Tenure Warranties and Made in USA. We have over 300 SKUs. 
 
Target Markets:
Car Dealerships, Large Warehouses such as Costco, Menards, Home Depot, Lowe's, and Grocery Store Chains. The list goes on and on quite frankly. Everywhere you look you will see that people have either old technology lighting or yellow lighting these are all potential clients and future customers! 
 
Sales Opportunity:
If I had only seven seconds to sell you this and get your attention, this is how it would go. I can show you a way to install the entire project for free, with a 50-70% energy savings - would you be interested? We are a company that sells energy-saving lighting solutions, We actual sell increased profitability, increased productivity, and superior color rendition. The type of money that somebody can make doing this is unlimited, if you can sell, you can sell this because this is a no-brainer.

This is the last job that was just completed and these numbers are real! A company installed $288,344.61 worth of material. This included product, shipping and installation (USA MADE). Our client also received a $64,000 rebate check from the utility company and his return on investment would've only been 1.7 years. However we chose to go zero cost out of pocket expense to the client, the lights pay for themselves and he's getting $1,000 a month positive cash flow to put in his pocket for the next 60 months.

So now the ROI does not matter at this point. The sales rep that sold this job made $25,000 commission and the letter of recommendation from our client is more than impressive! You have the opportunity here to grab low hanging fruit with a very easy conversation with major track records and huge ticket values. By the way, did I mention we've been doing business since 1997.
 
Company ID: 104141 - Click Here for Full Details
Product Lines:
Our Company is a Folding, Sliding, Telescopic Commercial Specialty Door Manufacturer.

We are in 18 Countries Worldwide and are Seeking Representatives in the US/North American Market. 
 
Target Markets:
A successful rep will have experience. Marketing Lines to Commercial A/E Firms and Partnering with General Contractors to Specify & Provide Pricing on Projects as Represented below:

- Fire Stations
- Airport Hangars
- Transportation Depots
- High Security
- Large Public Venues (Stadiums, Coliseums, etc.) 
 
Sales Opportunity:
Use your current network to extend your line offering and provide additional streams of income for your Agency. Our company is seeking partnership with Agencies across the nation and is interested in hearing from you! Folding, sliding, and telescopic doors are becoming more popular on many commercial projects (fire stations, bus & train depots, hospitality, stadiums, etc.). Set your agency up today to become a part of this new type of door.
 
Company ID: 106924 - Click Here for Full Details
Product Lines:
Our Company Sells a Line of Decorative and Protective Coatings for Concrete.

These Lines are Sold to Dealers Throughout the United States and in Various Foreign Markets. 
 
Target Markets:
We Sell to People who Either Want to Add On to an Existing Business or Start a New Business either Representing our Products to the End-User (Home and Business Owners). In addition, we are Seeking People who wish to Distribute the Product in Various Areas Throughout the US and Abroad. 
 
Sales Opportunity:
Our company provides a product, support and unique opportunity to the customer. Our products offer a solution sought by anyone who has concrete around their home or business which is how to protect the concrete from pitting, spalling, etc. while providing a look that will increase the property's value. We offer a competitive commission rate as well as sales support where needed.
 
Company ID: 106914 - Click Here for Full Details
Product Lines:
Auger Flights Formed from Materials such as Wear Plate, Mild Steel, Stainless Steel, and Bisalloy. 
 
Target Markets:
To Buyers of Spare Parts for Auger Systems Used in Screw Conveyors, Farming Equipment, Construction Equipment, Screw Pumps, etc. 
 
Sales Opportunity:
We are looking for experienced manufacturers representatives with established connections in the machinery, equipment and screw conveyor industries to promote and sell our true form auger flight products.
 
Company ID: 106901 - Click Here for Full Details
Product Lines:
Hybrid, Fluid Applied, Versatile, Revolutionary, Quick Curing, Waterproofing Restoration Products and Services.

High Solids Silicone, Urethane and SEBS Roof Coatings - as well as All the Other Materials (and Equipment) Associated with Commercial Roofing, Low Slope and/or Steep Slope Applications. 
 
Target Markets:
Roofing Contractors, Specialty Contractors, Distributors, Private Label Manufacturers, Industrial, Marine, B2B, National Accounts. 
 
Sales Opportunity:
This is an outstanding opportunity to work with a recognized National Company with a proven track record in the roofing and waterproofing industry- motivated to expand sales in the Midwest and Southwest United States market(s) initially, with further expansion to the West in the near future.

The ideal sales partner will be experienced in and already selling complimentary products to the above target markets with lines such as waterproofing materials, repair products, roofing products, marine repair products, concrete preparation materials, maintenance coatings.

Lucrative and exclusive sales & marketing territories are available all over the mid to Southwester United States. Additionally, the ideal sales partner will be just as experienced in the technical application aspects, and can and should be willing to performs onsite inspections for and with their respective contractor/customer base.
 
Company ID: 79311 - Click Here for Full Details
Product Lines:
Metal Stampings, Machined Parts, Plastic Parts Assembly. 
 
Target Markets:
Electronics Industry, Equipment OEMs, Appliance Industry, Automotive, etc. 
 
Sales Opportunity:
Sales opportunities to many varied industries using custom metal and plastic components. Manufacturing support includes over 450 workers, paint and finishing facilities, excellent quality control. Sales opportunities in most territories.
 
Company ID: 84950 - Click Here for Full Details
Product Lines:
High Quality Lubricants, Greases, Industrial, Automotive and Recreational Oils, Additives, Cleaners, Rust proofing, and Specialized Products. 
 
Target Markets:
Heavy Equipment, Industrial, Transport, Automotive, and Recreational. 
 
Sales Opportunity:
Our company designs, manufactures and distributes high performance lubrication products maximizing performance, protection and durability of mechanical equipment and vehicles. The wide range of lubricants such as greases, antifriction, motor oils, recreational oils, degreasers, cleaners and rust proofing developed by our company are intended for markets of heavy machinery, automotive, recreational vehicles and industrial equipment.

For more than 25 years, the mission of the company had impact in the lives of its customer. Today, with the help of our 30+ salesmen, we continue to live by it. We make our customers more efficient. By using our advanced lubrication solutions, by taking the advice, and the service of our lubrication experts.

Distribution Partnership:
We are looking for individuals or companies interested to offer our products lines to its customers in the US. We have different partnership programs available from completely independent distributor to the fully integrated Sinto Lubrication Expert. We do not wish to have many partners to keep our uniqueness and to maximize support and success of sales teams.

Advantages:
- Unique Brand with possibility of exclusivity agreement
- High quality products with a dynamic look
- We provide sale and product training and on the field support
- High Technical support (Team of chemists, engineers, sales)

Requirements:
The partner must understand our companies core values and fit with our culture. Sales experience with our targets markets.
 
Company ID: 106648 - Click Here for Full Details
Product Lines:
We Manufacture Aerial Bucket Covers.

Manufactured from High Density Polyethylene. It is a Slip on Design and Secured in Place. Available in 2 Standard Sizes and Custom Sizes upon Request. Custom Company Logos are Available or Standard Logo. Currently manufacturing in Yellow, Orange and Red. 
 
Target Markets:
Utility Supply Houses and Manufacturers of Aerial Bucket Trucks. 
 
Sales Opportunity:
There is limited competition in this specific product. You can reinforce your customers brand by having their logo inserted at the time of manufacturing. To our knowledge no one else offers this feature. If this is your market place and you do not have a competitive line, submit a sales inquiry to us.
 
Company ID: 106847 - Click Here for Full Details
Product Lines:
Non-Ferris Castings.

Sand Casting Brass, Aluminum ZA, Tool Making, Machining, and Assembly is Available. 
 
Target Markets:
OEM Manufacturers. 
 
Sales Opportunity:
We have a modern sand casting facility designed for non-ferris metals. We have additive manufacturing including CNC machining, painting, teflon coating and assembly. 3D printing and tool making capabilities. We are a convenient offshore factory in South America on the Caribbean Coast with English speaking engineers and short ocean transport times.
 
Company ID: 100706 - Click Here for Full Details
Product Lines:
Aluminum T-Slotted Extrusion Product Fabrications.

Machine Bases, Machine Guards, Robot Safety Fences, Workstations, Material Handling Carts, Gravity Conveyors, CMM Enclosures, Climate Controlled Enclosures, Sound Enclosures, Custom Frames, etc. 
 
Target Markets:
Systems Integrators, Automotive Plants, CMM Manufactures & Distributors, and Custom Machine Builders. 
 
Sales Opportunity:
Our company will support all Sales Reps with our engineering, project management and manufacturing teams. Our attention to detail, quality and customer service makes us a viable and reliable principle. We have all marketing tools including website, product brochures and catalogs. You bring the opportunity and we do the rest!
 
Company ID: 106815 - Click Here for Full Details
Product Lines:
Our Company is a Provider of Turn Key Solution in the Plastic Processing Industry.

We do Product Development, Manufacturing, Packaging, & Assembly. We do Business with Small and Big Companies. We Deliver Excellence in Every Project we Deliver. We Produce a Large Selection of Products. 
 
Target Markets:
You will Concentrate on Calling on Manufacturers of Finished Goods looking for External Production to Reduce Cost and Improve Quality and Product Availability. The Focus will be on Manufacturers of Consumers Goods and Plastic Parts. You will also be asked to Call on Industrial Designers in your area. 
 
Sales Opportunity:
A great opportunity with long term revenue! Our commission structure is one of the best in the industry. Our company is looking for 5 independant reps to develop the business in the following regions; 2 reps for the GTA area, 1 rep for the Cornwall/Brockville area, 1 rep for the Ottawa area, and 1 rep for the Montreal Area.

You would be reporting to the VP of Sales and Marketing. Quality manufacturing will provide customer listing, marketing tools and samples.We will also assist you for closing the deals. We are looking for experienced reps with a track record in the Plastic industry.
 
Company ID: 106230 - Click Here for Full Details
Product Lines:
Niche, Proprietary, & High Quality LED Retrofit Products, and Fixtures. 
 
Target Markets:
Electrical Distributors/Wholesalers & ESCOs. 
 
Sales Opportunity:
Looking to find reps who can provide a value add to their current customers. Currently, in the LED Lighting space, it is the wild west. There is a lot of fly by night companies and misinformation concerning products and their performance. Also, the industry seems to be in a "race to the bottom" with most being concerned simply with price.

As a nimble manufacturer, we are able to create some of the most efficient LED retrofit lamps & fixtures in the market. We are very competitive in our pricing however will never compete solely on that parameter. We offer premium products at competitive prices that will provide overall best value. We stand behind our products knowing they will serve customers well in the most extreme of environments.

There are many unique advantages our products have over others, including free surge protection devices, higher efficacies, longer life, more options, custom producing solutions, etc. If you are in the lighting space, you will be able to tell immediately by seeing our products and spec. sheets the quality we can provide your customers. We are constantly doing R&D to create more efficient and unique products that will constantly keep your customers ahead of the market in the LED lighting space, allowing you to make greater sales, profits, and commissions.
 
Company ID: 106762 - Click Here for Full Details
Product Lines:
Over 5,000 Items in 39 Categories, Impulse Items Counter & Floor Displays.

Including Sunglasses, Housewares, Cosmetics, Hair Accessories, Cell Phone Accessories, Party Supplies, Gift Bags, Tools, Hardware, Hats, Caps, Jewelry, Key Chains, Socks, Stationary, Toys, Winter Apparel, Beauty Accessories. 
 
Target Markets:
All Independent Convenience Stores, Liquor Stores, Drug Stores, Beauty Supply Stores, Party Stores, Car Washes, Flower Shops, Grocery Stores and Markets, Gas Station Mini Marts, Thrift & Discounts Stores. 
 
Sales Opportunity:
We have Imported and Supplied General Merchandise for over 25 years. While everyone if fighting for the major chains we feel there are so many Independents that we can offer better deals then there current suppliers. We offer Very Small minimum orders with Free Delivery. We provide Unlimited Catalogs. We have 6 different Catalogs designed by Store Type.

We Value or Reps and provide a sales Program for you to monitor your accounts as well as have real time Inventory at your fingertips. Our System is programed that only you can see your accounts and this will give you full protection on your accounts that you have worked so hard on. We have very high Commission and a support team ready to assist you. We are looking for professional Reps that will support us and we can Support while providing a great service to our Customers.
 
Company ID: 90178 - Click Here for Full Details
Product Lines:
Elegant Polyurethane Mouldings, Brackets, Louvers, Shutters, Window Heads, and Structural Railings Systems.

Distressed Rough Sawed and Hand Hewn Simulated Wood from "Early America". A Line Replicating the Delicate and Skeletal Membranes seen in real Brain Coral, Wire Coral, and Antler Coral. 
 
Target Markets:
Creation of New sales Accounts and Servicing of Existing 1 Step and 2 Step Distribution within the Designated Territory. Introducing new and enhanced product being designed and created to all the channel's of distribution, architects and builders. 
 
Sales Opportunity:
You will work with a company that has for the past 5 consecutive years shipped every order 100% on time. A company, proud to say we are 100% made in the USA. A company known for it's integrity, quality, attention to the customer and driven to excel in every aspect of servicing it's customer base as well as their customer's. A company that offers, custom building abilities for those "special" jobs that you must just have, as well as a company having the shortest lead times in this product category; 5 working days for all web and catalog orders.
 
Company ID: 104658 - Click Here for Full Details
Product Lines:
Portable Heaters and Fans, Plumbing (Toilet Seats, Faucets, Showerheads, Repair parts), Security Products (Locksets, Padlocks), Hardware, Paint Sundries, Electrical, Industrial Cleaning Supplies (Non-Disposable), Lawn & Garden. 
 
Target Markets:
We are looking to Grow our MRO Channel with a Particular Emphasis on Distributors that Sell into the Apartment and Lite-Commercial Space, Regional Industrial Distributors, Local Industrial Distributors, Local Hardware Stores/Supply Houses. 
 
Sales Opportunity:
Our portfolio of high-quality owned-brands stack up feature-to-feature against national brands while delivering to your customer up to 60% profit margins and the ability to compete on price against large, national chains. We specialize in delivering mixed loads of small quantities across a broad portfolio to minimize customer's delivered cost. We can fulfill customer demand either through direct import programs, domestic programs or a hybrid depending on the velocity of the item. Our complete assortment is in excess of 25,000 SKUs.
 
Company ID: 105050 - Click Here for Full Details
Product Lines:
Landscape Furnishings, various materials - Planters, Bollards, Benches, Columns, Fountains, Stair treads, Copings, etc

We are the First to Offer Insulated Planters which Qualify for LEED Points. Our Custom Capabilities are the Best in the Industry. 
 
Target Markets:
Landscape Architects, Developers, Landscape Contractors. Our products are typically used in commercial or high end residential projects. 
 
Sales Opportunity:
We have a great product line, always expanding and growing. Currently planters, columns, fountains, bollards, picnic tables, stair treads, balustrading, wall, or pool copings, etc. We will provide excellent support for our reps arming you with samples, catalogs, and the ability to answer any and all questions as they come up. We have all test results available, etc.

We try to be as green as possible and offer the best solutions for landscape designers. We are innovative and all products made right here is the USA. Looking for Reps in the States and a Regional Sales Manager. We are looking for representation in Florida and the entire Southeast.
 
Company ID: 106485 - Click Here for Full Details
Product Lines:
Stone Coated Steel Roofing Panels and Accessories, Synthetic Steep Slope Roofing Underlayment. 
 
Target Markets:
Distributors, Wholesalers, 2-Steppers, Lumberyards, Metal Roofing Manufacturers. 
 
Sales Opportunity:
Rapidly growing company, national opportunities, incredible growth potential. Our products are easier to install than our competition. We have a more robust warranty. Our lead times are a fraction of our competitors as well. This product is more contractor friendly and we have a price advantage. We enable higher gross profit for our distributors plus we train sales reps, distributors, and our contractors. We have certified contractor programs and job lot quantity or stocking agreements. Very flexible on order quantity. Also ordering assistance/takeoffs available. Higher than average commissions with a progressively increasing scale. 1099 Independent Contractor Pay Structure
 
Company ID: 106719 - Click Here for Full Details
Product Lines:
Custom and In Line Casegoods (Furniture) to Hotels and Healthcare Industry. 
 
Target Markets:
Directly to Owners, Designers, Purchasing Agents. 
 
Sales Opportunity:
All of our goods are manufactured in Canada/USA. 10 weeks lead times. We return drawings in 5 days. We have done over 800 hotels in the pass 30 years. The Canadian dollar helps us to be very competitive.
 
Company ID: 106710 - Click Here for Full Details
Product Lines:
We are a 44 year old Job Shop and Heavy Equipment Rebuild Shop.

In the Past we have Specialized in Rebuilding Coal Mining Equipment. We Currently have Ffabrication, Machining, and Water Jet Capabilities. 
 
Target Markets:
Our range of Customers are far reaching, in the Past we have done work for the Coal Mining Industry, Power Generation, Steel Mills, Paper Mills. Generally anyone who has the need for any type of Fabrication, Machining, or Water Jet. 
 
Sales Opportunity:
Working with our company provides a huge range of possibilities and opportunities. We have many capabilities which applies to a wide assortment of industries. We are capable of prototyping, or contract manufacturing; rebuilding of virtually any size and type of equipment. We have very competitive rates and we are ready for any and all new opportunities.

Please submit a sales inquiory to me today, and let's start working together as soon as possible. We are a 44 year old job shop and heavy equipment rebuild shop. In the past we have specialized in rebuilding coal mining equipment. We currently have fabrication, machining, and water jet capabilities. We have lifting capacity of 50 tons, CNC machining, welding, roughly 45,000 sq ft of space for manufacturing, building, rebuilding.

We also have sand blasting and painting facilities onsite. Our range of customers are far reaching, in the past we have done work for the coal mining industry, power generation, steel mills, paper mills. Generally anyone who has the need for any type of fabrication, machining, or water jet. We are looking for anything in the manufacturing space or any type of repeatable contract work.
 
Company ID: 105486 - Click Here for Full Details
Product Lines:
We are a Manufacturer of LED Lights Used at PowerSport (ATV, UTV, Motorcycle, etc) Retail Stores, Marine (Boat) Dealers, Heave Duty Trucks, and Farm Equipment Dealers.

Also Mining, Industrial, and Commercial. We have been in business over 8 years and do over $10 million in sales. 
 
Target Markets:
PowerSport Retail Stores
Off Road Adventures
Heavy Duty Trucks
Motorcycle
Marine
Farm Equipment
Distributors
Mining
Industrial
Commercial 
 
Sales Opportunity:
Midwest based LED Light Manufacturer is seeking Sales Representatives/Distributors in US and Canada calling on PowerSport/Off Road Retail Stores. Must be willing to travel to retail stores on your territory. We pay a good commission so that you can make a living and we pay on time every month! I am interested in you if your think your current customer base is interested in LED Lights.

Also interested in Distributors in any of above markets (US and Canada) that want an LED Light line backed by a strong US based company with a strong warranty. We offer both an inexpensive line to easily compete against the internet plus a high quality line for the customer who wants the best. All repeat sales belong to you.

We give exclusive territories. Support includes warm leads, training for you, same day shipments, best sellers lists, sales script to help you, monthly on-line meetings, and we treat you like the professional you are. Submit a sales inquiry to me and I will call you with a friendly no-obligation discussion. I respond to all inquiries.
 
Company ID: 102064 - Click Here for Full Details
Product Lines:
Composite Decking, Siding and Fastening Systems. 
 
Target Markets:
Deck Builders, HOA Associations, New High-End home builders and architects, Commercial builders, Deck remodelers (GA, AL, WV, and VA Only. 
 
Sales Opportunity:
We are looking for representation in Alabama, Georgia, West Virginia and Virginia for our newest line of imported composite decking. It is rot-free, comes in different colors and finishes, and is more reasonably priced than TREX material. We carry the full line of fasteners and even their newest line of snap together tiles for flat surface (concrete) applications. We are an exclusive distributor in these areas, so there is not an competition to sell this product! It is new to the US and has been sold in Home Depot for a few months as well.

We have over 35 years of experience and expertise in our field, as well as capabilities very rarely seen in this quantity under one roof. All sales are commission based. Commissions are paid the 10th of the month following shipment of the product to the customer. Rate of commission is negotiable, but standard rate is 6% of net sales.
 
Company ID: 106605 - Click Here for Full Details
Product Lines:
High Temperature Ceramic/Asbestos Free Insulation.

1/8" to 1" Thick Needled Mat 3,000F Silica Fabrics, Fiberglass Products Silicone Coated and Uncoated. All Products are Sold in Roll Goods and Fabricated Pads, Furnace Liners, Welding Blankets, Heat Treating Insulation, Torch Guards. 
 
Target Markets:
Refineries, Power Plants, Manufacturers Using Furnaces, High Temperature Applications, Heat Treating Stress Relieving Industry, OEMs, Plumbing Supply, HVAC, Aluminum Plants, Foundries, Fabricators. 
 
Sales Opportunity:
Looking for Reps in the Houston, Alabama, NE, NW, So Cal regions at this time. We supply all literature, leads in your area, trade shows expenses, some travel expenses, compensation 7% of the sale, current customers if sales calls follow up needed. All above is open to discussion
 
Company ID: 106635 - Click Here for Full Details
Product Lines:
We Manufacture High Quality RTA Solid Wood Kitchen Cabinets from China.

We are the Third Largest Kitchen Cabinets Manufacturer from China and our Products are Approved and Sold by Home Depot and other Big Players in US as OEM Products. We are now Marketing Directly with Two Warehouses. 
 
Target Markets:
Distributor, Retail Stores, Dealers, Builders, and Multi-Family Contractors. 
 
Sales Opportunity:
Our products are one of the best in quality from China. Consistency is the key word for our products! We give the most competitive price ever in this industry! We match and beat any price for the same quality product by 5-10%! We offer 7% for commission. If you have been in this industries for some years and have high inspiration for success, don't miss this opportunity!
 
Company ID: 106579 - Click Here for Full Details
Product Lines:
We are Taiwan Based Manufacturer Founded in 1975.

We have Two Factories in China Specializing in Manufacturing Audio Cables, Loudspeaker Cords, USB Cables, and all Wire Harness Assembly Based on Customers' Drawings to Meet with Customers' Special Designs and Needs. Also Manufacture the Inductance. 
 
Target Markets:
Industrial Factories, Loudspeaker and Automobile Factories, Data Communication, and Medical Equipment Factories. Also Wholesalers for Audio Cables and USB Charging Cables. 
 
Sales Opportunity:
-Guided by ISO and ERP system to control our production process and maintain our quality standard.
-UL certified factory for wire harness assembly.
-Strong development team-based on customer's design and needs.
-Prompt response and excellent customer service.
 
Company ID: 95719 - Click Here for Full Details
Product Lines:
Murano Acoustics™ Range of Wood Veneer Class "A" Acoustic Panels for Walls & Ceilings Create a Natural Aesthetic&Sustainable Solution to Noise Control.

Thanks to the Partnership Between Murano Acoustics™ & Teragren® Bamboo, TerrAcoustics® is a Bamboo Veneer Acoustical Panel Solution with Class A 
 
Target Markets:
Bartley Group is the Exclusive USA Distributor for the following product lines:
- Murano Acoustics™ Acoustic Wood Veneer Panels for Walls and Ceilings
- TerrAcoustics® Acoustic Bamboo Veneer Panels for Walls & Ceilings 
 
Sales Opportunity:
We are currently looking for Independent Representatives who are interested in long term partnerships and are involved in the Architectural/Interior Design & Contracting Communities & who have experience and/or are interested in working with Commercial/Retail & Residential GC & Sub-Contracting Firms, as well as Acousticians. With our 30 years of experience, Bartley Group a Single Source Provider of Specialty Acoustical Wood Solutions. We are committed to quality products & customer service & we are always looking for Independent Representatives of similar thinking.

We are looking for people who share our perspective:
• Honest, hard-working & driven
• Focused, meticulous & organized
• Motivated, self-driven & professional
• Enthusiastic, persistent & success-minded

Please submit a sales inquiry to us for more information today!
 
Company ID: 106563 - Click Here for Full Details
Product Lines:
Attachment Business for Excavator and Wheel Loader Attachments, Standard or Custom.

We Manufacture Buckets, Thumbs, Rakes, Couplers for Wheel Loaders, etc. We also have a Product Line that is New to us that Adds Length to an Existing Excavator Stick Static or Dynamic. 
 
Target Markets:
End-Users and/or Construction Dealers, Companies that do Ditch Cleaning, Fly Ash Loading, Sediment Pond Cleanup, E.P.A. Cleanup, Dredging, Demolition, Slurry Trench Digging, Underwater Excavation, Stand Pipe Excavation, Canal Digging, Subway Construction. 
 
Sales Opportunity:
This is a privately owned business, consisting of inside sales, engineering, manufacturing, warranty, and service. As some of the products have competition the excavator extensions have less, and the name is the original in the business. Reps will be invited to the factory and have a day of training. Also introduced to the personnel who will help support their calls and who might travel with when requested or needed.
 
Company ID: 98641 - Click Here for Full Details
Product Lines:
Slate, Shake, and Barrel Profile Concrete Roof Tiles, and Related Components for Commercial and Residential Sloped Roofs. 
 
Target Markets:
Mid- Atlantic, Northeast, Great Lakes Area. 
 
Sales Opportunity:
Eagle Roofing Products is the largest manufacturer of concrete roof tiles in the US. The roof tile industry has historically focused on the residential housing market in the Sunbelt. Our products are universally specified on commercial and residential structures for both new build and reroofing applications.

We participate in numerous building industry, architect and roof consultant trade shows across the country. Concrete roof tile is an affordable permanent alternative to real and synthetic slate, wood shakes and metal roofing. We are seeking independent representatives to help us expand the boundaries of our market and service the leads we receive outside of the Sunbelt region.

We would like to work with reps who are technologically savvy and would consider utilizing our CRM to obtain and track leads generated through our trade shows and outbound marketing campaigns. Products USA Made, USA Owned.
 
Company ID: 8113 - Click Here for Full Details
Product Lines:
Synthetic Fibrous Reinforcement for a Wide Variety of Concrete Applications. 
 
Target Markets:
Sales contact is made through Architectural Firms, Concrete Contractors, Engineers, Design Builders, and End-Users. The ultimate sale is to Precast, and Ready-Mix Concrete Providers. 
 
Sales Opportunity:
A leading and innovative concrete fiber reinforcement manufacturer is seeking qualified independent sales representatives to join our team as we expand our territories in the New York City, North Texas, Oklahoma, Tennessee, Oregon, Washington, Montana, Wyoming, Kentucky, Colorado, Utah, New Mexico, and Arizona.

The company has a wide variety of fiber products to serve almost every customers needs, and is known for its extremely high quality products, leading edge technology, attention to detail and outstanding customer service. Sales representatives are provided with the tools necessary to succeed including an extensive training program, technical support, existing customer base and lead generation.  Enjoy one of the best commission structures as we grow together.
 
Company ID: 106550 - Click Here for Full Details
Product Lines:
All Natural Odor Neutralizers for Wholesale, Retail, Commercial, Institutional. 
 
Target Markets:
Specialty Stores - Academy, The Container Store, Natural Foods Stores
Convenience Stores - 7Eleven, etc.
All Gas Stations - Loves, QT, etc.
Hardware - Lowes, ACE, True Value 
 
Sales Opportunity:
Why should you Rep our company?

Unique product, already known in many channels for 30 years - 10 years on QVC, We have sold at Travel Centers of America (formerly Truck Stops of America) for more than a decade.

We operate as a family business - highest integrity - 30 year track record - Unmatched efficacy is our competitive advantage. Commission structure negotiable mutual incentive. We team with proven sales performers that match our product performance and values.

Our goal to have our brand available to every home, office, and business nationwide
because of the unique performance, it actually neutralizes all odors safely. Such as, tobacco, musty odors, bathroom/toilet, healthcare, and pet odors, even skunk spray. Efficacy can not be matched by any other product in the air-freshener odor counteractive category. Three decades of sales in multiple channels.
 
Company ID: 106464 - Click Here for Full Details
Product Lines:
State of the Art and Industry Changing UL and DLC Rated/DLC Premium Rated LED Lighting, Retrofit Kits, and New Fixtures. Several Manufacturers. 
 
Target Markets:
Schools, School Districts, Hospitals, Hotels, Commercial Office, Warehouse, Government Facilities, Cities and Townships, all Municipalities, Electrical and Lighting Contractors, and Distributors, Facility Managers and Engineers, Property Management Companies, etc. 
 
Sales Opportunity:
Market LED lighting retrofit kits and new fixtures for several of the world's leading and most innovative LED lighting manufacturers. One manufacturer offers a product that has revolutionized the 2'x2', 2'x4', commercial ceiling troffer, and industrial strip marketplace a simple magnetic retrofit kit that takes minutes to install without tools.

It is DLC premium rated and gets your customer the highest utility company rebates. We have sold millions of dollars of this product in a short period of time to large box distributors and contractors and schools. You may need only to sell this product to make an incredible amount of commission.

However, all of our manufacturers are at least DLC rated and most are DLC premium. Generous commission scale to start .You will be able to do your own mark ups on products.Training provided via email,phone and in person. Ad slicks, spec sheets provided via download. Independent reps and agencies welcome to apply.
 
Company ID: 103232 - Click Here for Full Details
Product Lines:
Attachments for Tractors, Skid Steers, and Excavators that are meant for Large Farms, Hobby Farms, as well as Forestry, Construction, and Rental.

Equipment includes Trenchers, Brush Mulchers, Tree Shears, Tree Spades, Stump Grinders, Generators, Auger Drives & Bits, Wood Splitters and Tractor Booms. 
 
Target Markets:
Our customers are Farm Equipment Dealers, Construction Dealers, Small Engine Dealers as well as Rental Houses. 
 
Sales Opportunity:
Our pricing is a FOB dealer (free freight) in North America and our products are powder coated and shipped crated. We supply free full line catalogs for the dealer literature racks, offer consignment equipment, and attend trade shows and offer a lot of online support as well as answer the phone in person when our sales force has any questions so may questions can be answered on the spot during a dealer visit. We strive to keep very short lead times and often can ship in under a week. We are looking for long term relationships with independent reps in select areas.
 
Company ID: 106534 - Click Here for Full Details
Product Lines:
Our company is an industry leader in the Spray Polyurethane Foam industry. We manufacture both open and closed cell spray foam as well as Polyurea and specialty coatings. 
 
Target Markets:
Our reps will be driving specifications through Architects and Large General Contractors in the Commercial, Industrial, Agricultural and Residential markets. 
 
Sales Opportunity:
Spray Foam is an ever expanding industry that has seen double digit growth year over year for the past 20 years. Our company was one of the pioneers in this industry with a reputation of having superior products that are innovative. We currently have a strong base of over 700 authorized contractors who install our material on a daily basis in all 50 states. We are looking to expand our presence within the architectural community to drive business back to our contractor base. We are looking for Manufactures Reps who currently have experience in both the Architectural and Design Communities as well as the Building Enclosure World. We are looking for experienced AIA presenters who feel comfortable interacting with Principles as well as Spec Writers.
 
Company ID: 106526 - Click Here for Full Details
Product Lines:
Specialty Tires, Agricultural, Industrial, Lawn & Garden, Trailer, ATV. 
 
Target Markets:
Tire Dealers. Trailer Manufacturers, Mining Industry. 
 
Sales Opportunity:
We are a family business since 1984 and have very good reputation in the market and our customer service excellent. We are searching for a sales representative in western Ontario. We keep a good inventory and have a good Financial position to grow.

Our mission:
Odessa is a family business that aims to be the technical reference for specialised tires and develop a true business partnership with our clients and promote a healthy growth of our respective businesses. Have efficient distribution with quality products while having complementary inventory to our customers.

Be the best for customer service experience. As an employer, Odessa Canada, true to its values of honesty, respect and social commitment, wants to convey to its employees these values that allow people to work in a climate conducive to its full potential thereby ensuring a constant progression.
 
Company ID: 106470 - Click Here for Full Details
Product Lines:
Our Product is a Breakthrough Backup Communication Tool for Spotters and Drivers Giving the Clarity, Communication, and Visibility Needed to Avoid Potential Accidents, Reduce Liability, and Save Lives. 
 
Target Markets:
This is an Easy to Install, Simple to Use Communications Product that Provides Improved Safety to Any Vehicle that Uses Human Spotters when it Backs Up.

Markets include:
* Utility Companies
* Fire and Ambulance
* Construction
* Mining
* Oil and Gas
* Military 
 
Sales Opportunity:
Please submit a sales inquiry to us if you are interested in discussing a sales rep opportunity with our company to bring this versatile and life saving system to vehicles in your market. Several regional areas and market segments are still available.
 
Company ID: 100581 - Click Here for Full Details
Product Lines:
Revolutionary/Innovative Technology to Enhance the Profit Margins for All Parties.

Patented Side Stream Ultra Sophisticated (Particle Precipitator) Filtration System for Chillers, Water Towers, and Boilers. Simple Installation, with Average of Two years or less ROI. 
 
Target Markets:
Large Commercial, Industrial and Institutional Facilities. Also Mechanical Contractors, Chemical Water Treatment Suppliers and Building Automation Contractors, great opportunity for individuals with existing relationships with Facility Managers, CFO's, etc. 
 
Sales Opportunity:
Our Systems enhance the operation and profit margins for Sales Organization, Mechanical Contractor, Chemical Suppliers and Facility Operators. This is a Sales Commission opportunity, simple referrals 2.5% to full blown Sales Presentation 10% Commission, the option is up to the Sales Representative. Open Territory to include all US. Average Sale $100,000 plus installation, service agreements, and replacement parts, etc.
 
Company ID: 105368 - Click Here for Full Details
Product Lines:
The Latest Technology of LED Lighting Products including a Variety of Bulbs, Indoor and Outdoor Fixtures, and Associated Control Gear.

Our new solar powered LED lighting products created further opportunities for the company to extend its market and revenue. 
 
Target Markets:
US and Canadian Markets in All States and Provinces. Electrical Distributors, Electrical Contractors, Lighting Designers, Industrial & Commercial Customers such as Schools, Hospitals, Municipal Institutions, and Sports Facilities. 
 
Sales Opportunity:
Wide range of rebate programs for Energy Saving provide a lucrative and cost effective incentive to replace old lights with the latest in LED technology. Lucrative commission structure with quarterly bonuses.

Competitive advantage:
- Best technology available
- Proprietary design
- Excellent service
- Ship from Toronto Warehouse
 
Company ID: 96261 - Click Here for Full Details
Product Lines:
LED High Bay Lighting Units
LED Flood Lighting Units
LED Street Lights
LED "Shoe Box" Lighting Components 
 
Target Markets:
Distributors
Wholesalers
Contractors
Retail Customers 
 
Sales Opportunity:
We have 15+ manufacture experience in manufacturing industry leading lighting products and electrical products. Our manufacturing line is located in Beijing, China, with margin of failure lower than 0.1%. High quality and brilliant service has been accomplished by our customers all over the world. We offer 5 year limited warranty and we are setting up distribution warehouse in the Orange County, California. We will provide fast service for your clients whenever they need it.

Our product line includes:
- Low output flood lights for exterior building lighting and billboard lighting.
- High output flood lights for billboard lighting, building exterior lighting, building interior lighting, parking lot lighting etc.
- High output high-bay flood lights for warehouse interior lightings, stadium lightings, etc.
- Low & High output street lights for all kinds of roads.

We also provide free lighting distribution estimation report and lighting solution design based on the customers' demand. We are one of the most professional manufacture around the world. And we pursuit the world wide top quality service for our clients. Of course our worldleading quaility and awarded designing is our foundation and support. People choose us not because of just our quality, but trust.
 
Company ID: 106332 - Click Here for Full Details
Product Lines:
Our company Manufactures Custom designed Abrasive Grinding Wheels, Discs, and Segments.

Our Wheels are Free Cutting & Highly Efficient, Providing Prolonged Dressing Cycles, High Metal Removal Rates and Cool Cutting. 
 
Target Markets:
Concentrating on Surface Grinding, we Custom design Bonded abrasives to Meet Industry’s Needs. Our Products are Used in the Production of Automotive Parts, Bearings, Cutlery, Hand Tools, Springs, Forestry Products, and a Wide Variety of other Items. 
 
Sales Opportunity:
We are looking for Sales Representatives to market and sell our products in several regions. The first is Texas and Oklahoma and the second is the Pacific Northwest (Washington, Oregon, Montana and Idaho) the third is California and the fourth is Western Canada.
 
Company ID: 106293 - Click Here for Full Details
Product Lines:
Plastic Valve Boxes
Plastic Corrosion Protection Test Stations
Valve Box Locking Lids
Valve Box Non-Pop Lids 
 
Target Markets:
Municipalities
Gas Distribution Companies
Building Facility Managers
Valve Supply Centers
Fire Departments
Water/Wastewater Facilities
Contractors
Construction Companies 
 
Sales Opportunity:
Our company manufactures plastic valve boxes, plastic locking lids, and plastic non-pop lids. Our products have a unique application and patent protection. The ideal customers desire lower maintenance costs by preventing dirt and debris from entering the valve box. Locking lids also provide a level of security that is becoming an increasing need.

We seek experienced and seasoned individuals with a successful prior experience selling industrial water and gas distribution equipment wholesale distributors. Our staff will provide all necessary training, support and marketing materials. We are looking for partners who share our passion for the reduction of maintenance and increase of security for underground valves.
 
Company ID: 106282 - Click Here for Full Details
Product Lines:
We are a High-Quality Safety and Work Gloves Manufacturer Based in Japan.

Our Line-Up includes the following :
- Nitrile and Latex Coated Gloves
- General Purpose Work Gloves
- Oil and Chemical Resistant Gloves
- Waterproof Gloves
- Cold Resistant Ggloves
- Cut Resistant Gloves 
 
Target Markets:
We are Looking to Sell Through Industrial Distributors Selling Safety Equipment and PPE (Personal Protective Equipment) to End-Users Operating in the following Industries:
- Construction
- Agriculture
- Oil and Gas
- Metal Manufacturing
- Woodworking
- Warehousing
- Mechanical Manufacturing 
 
Sales Opportunity:
We are looking for motivated sales reps agreeing to work on a commission basis. We offer a fair commission and are open to discussion regarding compensation of business development costs. We provide promotional materials such as catalogues and samples, as well as training. The ideal profile is a representative with an established distributors network, with knowledge about PPE and the safety equipment market, looking to add a high-quality line of gloves to their business.
 
Company ID: 103597 - Click Here for Full Details
Product Lines:
LED Panel Lights for Commercial/Industrial Applications.

The Unique Advantages of LED Lighting is Energy Saving, Long Life Products, and Low Maintenance Cost. 
 
Target Markets:
LED Panel Lights are great Solutions for Offices, Clinics, Schools. High Bay/Low Bay LED Lights and Wall Packs Lights are great for Industrial, Commercial, Warehouses. Sales can be made Directly to above End-Users or to Sell Through Lighting Designers, Architects, Lighting Contractors. 
 
Sales Opportunity:
Experts predict that LED lighting market will continue to grows at 45% per year for the next 10 years. This is an opportunity few industries can offer. China is the world's largest LED manufacturing base. We work with directly with top manufacturers to ensure best quality at most competitive price. We pay attractive commissions to top producing reps.
 
Company ID: 106164 - Click Here for Full Details
Product Lines:
Skid Steer Attachments.

Including Laser, GPS, 3D, and Sonic Automated Leveling skid Steer or Tractor Attachment. Mobile Fuel Cart of 500, 750, or 990 Gallons. 
 
Target Markets:
Equipment Dealers and Rental Dealers. 
 
Sales Opportunity:
We are a high tech manufacturing company that produces our products from start to finish located in Southern Minnesota. We've been in business for 26 years and have an established sales and service teams in place. Our business has grown on service and quality.

We are looking for independent reps that understand the light construction equipment industry. Our attachments are innovative and will give the end user a competitive advantage over the competition. We are looking for reps along all costal and southern states. Our product lines are higher dollar. We pay 6% commission at the time of payment.
 
Company ID: 106179 - Click Here for Full Details
Product Lines:
Fiber Optic Products. 
 
Target Markets:
Telco's, Cable Companies, etc. 
 
Sales Opportunity:
Our company has been serving the Fiber Optic industry since 1992. We specialize in quick turnaround as fast as 24-72 hours and we do all configurations needed. All of our products are made exclusively in the USA and we quality-control test thoroughly before shipping. We are a high volume shop, can offer you the best prices in the industry, and we guarantee to beat any price you’re getting now after all is said and done.

We have been supplying Fiber jumpers, multi-fiber cables and components to the Telco industry for over 20 years now. All our products meet or exceed the Telcordia/Belcore GR-326 and Verizon requirements. We have one of the fastest lead times in the industry, 24-72 hours ARO on Fiber Jumpers and 3-5 days on Multi Fiber cables.
 
Company ID: 106072 - Click Here for Full Details
Product Lines:
Plastic Welding Equipment and Machinery.
Hotplate, Vibration, Laser, Ultrasonic, Infrared, Hot-Gas Welding Machines, Tooling and Automation.
Prototype Production, R&D and Engineering.
Special Machine Build for Plastic Assembly and Manufacturing. 
 
Target Markets:
Automotive, Aerospace, Pharma, Appliance, Injection Molding, Consumer goods,Plastic Manufacturing, Special Applications for Plastic Joining. 
 
Sales Opportunity:
Very good opportunity to partner with a strong technology driven international company. With over 60 years experience in the market, we are a technology driver in all technologies of plastic welding.
 
Company ID: 106160 - Click Here for Full Details
Product Lines:
Precision Job Shop that Produces Sheet Metal Parts. 
 
Target Markets:
Medical Device, Aerospace, Telecommunications, Electronics, Transportation, Point of Sale, Energy, Lighting, Defense, Custom Enclosures, Custom Racks, etc. 
 
Sales Opportunity:
Our company is a Precision Sheet Metal job shop located in McMinnville, TN. We have customers in a 700 mile radius and are looking for someone with previous sheet metal experience that can read prints and some inside sales or outside sales background. We have lasers, turrets, welding, and a complete job shop with all of our processes in two buildings except zinc plating.

We are not a super shop run by family but a seven million dollar a year business with 55 employees. We plan to be in operation for a long time and I am trying to find some people that understand the business and may have connections with customers needing our services.

I can also supply leads from all over the east coast, midwest, and south. College is not a requirement for this opportunity at all. It is a 5% commission rep job and being here is not required but twice a year or if you want to bring customers to our site. Again precision sheet metal knowledge is required.
 
Company ID: 86824 - Click Here for Full Details
Product Lines:
Polymer Repair Compounds
High Performance Protective Coatings
Epoxy
Polyurethane
Ceramic Coatings 
 
Target Markets:
Industries that would Require Repair and Protection from Corrosion where High Heat, High Chemical or High Abrasion are found. 
 
Sales Opportunity:
Seeking exclusive territorial sales distributors with established technical sales team or managed reps. Must warehouse, hold credit with customers, train, support, and sell. As a supplier of polymer repair and protective coating products for industrial applications including mechanical components, machinery, and equipment.

We pride ourselves to formulate and manufacture the highest performance, cold-applied polymers and cold-weld solutions for industrial asset repair and coating protection to guard against corrosion caused by high temperature, high chemical, and high abrasion.
 
Company ID: 104164 - Click Here for Full Details
Product Lines:
Concrete Curing and Finishing Products.

Concrete Grinding and Polishing Products. Concrete Repair Products. Concrete Colors, Invisible Fibers, and Rebar Replacement. 
 
Target Markets:
Architects, Engineers, Flatwork Contractors, Flooring Contractors, and Large General Contractors. 
 
Sales Opportunity:
We offer patent protected product lines. Much of the product line will revolutionize the concrete curing and finishing industry. This is a ground floor opportunity for the aggressive rep who is looking for state of the art products. Industry leader in the concrete curing and finishing industry and the concrete grinding and polishing industry.

If you want a serious opportunity with a serious company let's talk. We provide thorough online training and field support, but we want a self starter. Hands on and capable of understanding and presenting to architects and engineers.
 
Company ID: 106101 - Click Here for Full Details
Product Lines:
Thermal Break Steel Doors, Wrought Iron Doors, Decorative Steel Doors, Glass Doors, Entry Doors. 
 
Target Markets:
Architects, Contractors, Builders, Developers. 
 
Sales Opportunity:
The popularity of Wrought Iron Doors is soaring but poor thermal performance has limited sales to southern states where winters are warm. In colder climates there can be severe condensation and even frost buildup on the inside of the doors.

Our company holds Patents on an effective thermal break technology for Wrought Iron Doors. This technology allows builders in cold climates to confidently offer the high security and beauty of our heavy steel doors. With a U-Factor of 0.43, the thermal performance of these doors has been tried and tested in over 200 installations in northern USA and Canada. In addition to entry doors we also make steel casement windows, French doors, and sliding doors.

As our manufacturers rep you would be given an exclusive area. You would be expected to make sales through your own network but will also be given leads generated on our site.
 
Company ID: 105923 - Click Here for Full Details
Product Lines:
World #1 PV Industry String Inverter Product, High Performance Poly and Mono Crystalline Products, Energy Storage System, and Commercial Industry LED Products. 
 
Target Markets:
Primary Sales Targets are Engineering, Procurement and Construction (EPC) Company, Solar Project Developers, Electrical Engineering Company, and Design Firms. Primary Sales Method is Telephone, Email Sales, and Direct Sales Presentations. 
 
Sales Opportunity:
Looking for entry level and experienced engineering or sales background sales. The sales will have strong engineering support from manufacturer, help get leads from company and follow potential customer and projects. The solar industry is one of few fast growing marketing around the world. To join this new industry will not only help you get a brighter career future but also great rewards to support your family.
 
Company ID: 56504 - Click Here for Full Details
Product Lines:
Unique Industrial Cleaner which has the Ability to Rapidly Contain and Eliminate Hydrocarbon-Based or Protein Contaminants.

Totally Unique to the Marketplace. We have also Developed FOG (Greases, Fats, Oils) Destroyer for Lift Stations and Sewage Systems. 
 
Target Markets:
Soil Remediation
Waste Management
Restaurants
Oil Clean Up Remediation
Lift Stations
Wastewater Treatment Plants
Garbage Truck Cleaning
Oil Refineries
Asphalt Equipment Cleaning
Maintenance Departments
Industrial Cleaning
Wastewater Disposal
Contaminated Waste 
 
Sales Opportunity:
It is an industrial cleaner that is formulated to work on most hydrocarbons, both mineral oils and lipids (plant and animal fats). It was born via cleaning oil spills worldwide. We are superior in the following 4 categories: Cost, Effectiveness, Application Process, Toxicity. Product is drain safe, EPA approved, NSF National Sanitation Foundation NSF-Registered and compliant, Green Seal Certified, Exceeds the National Safety Council's standards. We provide 8% commission with an unlimited income potential. We support our reps with proper training and marketing materials.
 
Company ID: 105753 - Click Here for Full Details
Product Lines:
These Louvered Roofs are an adjustable louvered roof system ideal for outdoor dining and living. 
 
Target Markets:
Target markets are the Restaurant and Hospitality/Hotel markets throughout North America. Clients would include business owners, chains, franchises, architects and designers. 
 
Sales Opportunity:
Outdoor dining and other activities are on the rise and consumers are looking for restaurants and hotels that offer an outdoor experience. These louvered roofs helps businesses take advantage of the outdoor space, no matter the weather condition. The louvers have an 160 degree range of motion, so that they can be positioned to where you can have sunshine or shade when you want it.

If it begins to rain, close the louvers and the area is protected and water tight. This allows businesses owners to continue to use the space to produce revenue no matter the climate. It is made of extruded aluminum and has engineering to support all markets in North America. It is sold to the residential market through our dealer network. This product is still relatively new so exposure to the target markets is the key for success.
 
Company ID: 105804 - Click Here for Full Details
Product Lines:
Concrete Cleaners, Degreasers, Sealers, Paint Removers, Moss Removers, Non acetone Nail Polish Removers.

Our Concrete Cleaner is a unique product and is the only one in the world capable of removing the black mineral stains and efflorescence from concrete and masonry products. 
 
Target Markets:
Retail Stores, Service Providers. 
 
Sales Opportunity:
Great opportunity for Sales Reps, or companies that want to expand their product lines, we offer exclusivity areas under certain conditions and we support 100% our reps through our 800 line, we own our IP and we are looking to expand our territories.
 
Company ID: 83872 - Click Here for Full Details
Product Lines:
We are Leading Manufacturer and Distributor of Natural Pet Treat such Himalaya Cheesy Chew made from Yak Milk. Buffalo Treat like Jerky, Tail, Horn, Trachea, Head Skin, Ear, etc.

We are a Leading Manufacturer of Stainless Steel Pet Products. We have a Warehouse in Michigan, USA and Toronto, Canada. 
 
Target Markets:
Pet Stores, Grocery, and Drug Stores as well as Big Box Stores and Big Chains. 
 
Sales Opportunity:
We are the only Indian Pet Products manufacturer having a warehouse in USA and Canada. While dealing with us, you can eliminate the middle man margin because they are dealing directly with the Manufacturer. We are the only manufacturer of Natural Tough Toys in the Pet Market. We are brand partners with a company for Dog Jackets and Beds. Recently we started manufacturing Salmon Fish Dog Treats in Alaska. We are also manufacturing Famous Himalaya Yak Milk Dog Treats. All our Dog Treats are 100% Organic and Natural.
 
Company ID: 105761 - Click Here for Full Details
Product Lines:
A Large Variety of Gutter Covers including DIY, Residential, and Commercial.

Twelve Different Gutter Covers, 13 Different Colors, and Copper Plus One Heavy Duty Vinyl Gutter Cover. 
 
Target Markets:
Gutter Companies, Roofing Companies, Painters, Home Remodelers, Builders, and many others. 
 
Sales Opportunity:
We are a national manufacturer of gutter protection for both the residential and commercial markets. Our line of high-quality, high-performance gutter protection products are Made in America. These patented products out-perform our competition because we have a gutter cover for every roof, gutter and foliage challenge that may exist.

Our products have been independently tested for adverse weather conditions and our popular Gutter Topper product withstands hurricane force winds of 110mph (Cat 4). Help build your network and market with our high quality products. Training and marketing materials are available.
 
Company ID: 105663 - Click Here for Full Details
Product Lines:
We Sell a Wide Variety of Internet Marketing Services to Distributors, OEMs, and Contractors.

These Services Range from Basic Websites, to eCommerce Sites, to SEO Marketing Services. Our Services come in a Package Form that is Completely Relative to the Customer's Needs and Marketing Budget. 
 
Target Markets:
We are looking to Focus on the HVAC, Mechanical, Electrical, STAFDA, and Construction Markets. 
 
Sales Opportunity:
This is an incredibly unique sales opportunity to sell our services to new existing customers to increase their sales and grow their business. Bomb Media has been wildly successful selling our services to distributors, OEMs, and contractors, and have greatly increased their company sales as a result of our services.

We have experience in the Industrial Markets and know exactly what these types of businesses need to grow. The interesting part is, once your customer's businesses continue to grow, they wont just be buying our services from you, they'll begin to increase their purchases of your other lines due to an increase in demand that will result from our services.

We’re looking increase our sales over the next five years by solely focusing on the markets in your territory. We’d like to partner with you and experience mutual growth in both of our businesses. We’re willing to offer a very generous commission on all sales made by your firm and we’ll provide your team with education on our services, state of the art sales tools, leads, and 24/7 support. We are easy to work with and easy to do business with.

We are looking to make sales easy for you and help you grow your business and your customer's business while we grow ours.
 
Company ID: 105758 - Click Here for Full Details
Product Lines:
1) Architectural Custom Metal Fabrication - Aluminum, Stainless Steel, Mild Steel & Other Composites
2) Standard Sheet Metal Products & Services
3) Sheet Metal Fabrication-Related Engineering Assistance 
 
Target Markets:
1) Architects, Contractors, Engineers, Distributors, End-Users
2) Various 
 
Sales Opportunity:
The company's top-notch quality products & services have long enabled us to secure a niche in the Architectural/Construction Industry. Coupled with a few major capital investments in FF&E for the past 5-6 years, our company has continuously grown over time and the company is now ready to diversity the primary architectural custom metals fabrication into a greater range & new territories of sheet metal products & services.

This is a ground floor opportunity for the right Independent Marketing & Sales representative(s). No leads will be provided, however, the initial training on products & services, capabilities, etc. must be arranged. Competitive commission structures & exclusivity may be granted to the right fit.
 
Company ID: 104834 - Click Here for Full Details
Product Lines:
Coatings and Sealers for Restoration, Repair, and New Construction. 
 
Target Markets:
Customer Base of Coatings Distributors, Coatings Contractors, and specifiers. Additionally, it would be Beneficial to Call On Architects, Engineers, and/or large Commercial Property Owners. 
 
Sales Opportunity:
A new and innovative coatings company is seeking a reliable, motivated and confident sales representatives, to attract new customers as we expand the territories across the country. Be a part of a team that provides high quality products and outstanding customer service. Coatings and sealers offer a solution for repair, restoration and new construction.

This is a 100% commissioned sales representative position. You will be responsible for your own expenses. However, you will benefit from an industry-leading commission program, as well as product, technical, sales and engineering support. We offer an excellent training program to introduce you to the wide variety of products and services.
 
Company ID: 85570 - Click Here for Full Details
Product Lines:
Amazing new technology for Odor Elimination and Disinfection. There is nothing like it. Easy to sell and close! 
 
Target Markets:
•Those interested in starting a very profitable, low overhead Service, or sell directly to the business.
• Bars & Nightclubs
• Restaurants
• Hotels & Motels
• Apartments Complexes
• Condo Buildings
• Athletic Clubs & Gyms
• Office Buildings
• Nursing Homes
• Warehouses
• Car, Boat and R/V Dealers 
 
Sales Opportunity:
Handsome commissions on equipment that offers a huge benefit to the buyer. Our systems are performance guaranteed with a money back guarantee, which makes it a no risk close. We provide everything needed to make a nice presentation. All you have to do is bring the prospect to us. If they buy, we send you a nice check.
 
Company ID: 105618 - Click Here for Full Details
Product Lines:
A & G Industrial is a well established US Based service Company Seeking leads for Tank Linings & Repairs, Pipeline Coatings & Repairs, Epoxy Coatings, Composite Carbon Fiber Structural Repairs, Water Intrusion Mitigation and other projects related to Corrosion, Erosion & Structural Reinforcements. 
 
Target Markets:
Power Generation, Petro Chemical, Oil & Gas Storage & Distribution, Chemical Plants, Manufacturing, Pulp & Paper & Waste Water Treatment. 
 
Sales Opportunity:
This business opportunity offers the right individuals unlimited earning potential with no financial investment. Commissions range between 5-10% gross revenue. A & G also brings to the table many contacts and customers from CITGO, Dominion Power, Exelon, Exelon Nuclear, NRG, and several other large companies throughout the US.

Technical training, sales support and all sales aids provided. Our company has a network of qualified applicators throughout the US. Please note: We are a REP friendly company that appreciates the work that you do and the time you spend at your craft. We also have a network of established customers and would be willing to share these contacts with committed Reps. Our company always honors our agreements and will work hard to make you money!
 
Company ID: 105518 - Click Here for Full Details
Product Lines:
Cargo Control Products including Load Binders, Chain, Accessories, and Connectors.

We are Cast and Forged Steel Product Experts with the Flexibility to Custom Manufacture. 
 
Target Markets:
Industrial, Trucking, Rigging, Construction, Automotive, Rail, Marine, and Air Cargo Industries. 
 
Sales Opportunity:
Experienced manufacturer in Europe, Asia, and Australia transitioning to sales in the US. Ground floor opportunity to leverage relationships and make uncapped commissions. Manager is a 27 year distribution and manufacturer rep with the kind of lend a hand attitude you have been looking for. Please come help us be the best in the business!
 
Company ID: 105514 - Click Here for Full Details
Product Lines:
Air Curtains, Industrial Air Curtain, Unit Heaters. 
 
Target Markets:
HVAC andRefrigeration Contractors, Industrial Door Installers, Cold Storage Contractors, National Accounts. 
 
Sales Opportunity:
We are the oldest manufacturer of air curtains. We are a European company, with leading technology and design. This is a ground floor opportunity to sell this product to a new market.
 
Company ID: 105510 - Click Here for Full Details
Product Lines:
Roofing Underlayment, Saturated Felt and Synthetic felt, Cap Sheet, Base Sheet, Ply Sheet, SBS Modified Rolled Products, Self-Adhered Rolled Products, House Wrap, Air Barrier, Window and Door Tape, Sheathing Tape, Craft Building Paper. 
 
Target Markets:
One Step Stores, Two Step Distributors, Roofing Supply Stores, Co-Op Buying Groups, Lumberyards. 
 
Sales Opportunity:
We are a well known roofing manufacturer and have been in business for 26 years. We are in search of sales reps with roofing product knowledge and great customer relations. We have several regions available.
 
Company ID: 105488 - Click Here for Full Details
Product Lines:
We are a Metal Stampings manufacturer. We design, build and maintain the tooling in house for the life of the product. Progressive tooling ranging from 12 to 176 tons. Multislides ranging from #104, 28, 33, & 35. 
 
Target Markets:
We are interested in expanding all of our current markets, especially the non automotive opportunities. Currently supplying the following markets: Automotive, Window, RV, Manufactured housing, Fishing Lure, Cable/Wire Rope, and Small Engine. 
 
Sales Opportunity:
All sales are currently handled from inside and we are looking to form long lasting relationships with outside manufacturers reps in various territories across the United States. We are family owned and operated and are willing to travel/meet customers to discuss opportunities.
 
Company ID: 105274 - Click Here for Full Details
Product Lines:
Fiberglass Mesh, Drywall/Stucco Tape, Masonry Tools, Sporting Knives, Agricultural Tools, Cutlery, Flashlights. 
 
Target Markets:
Building Supply, Stucco and Drywall, Hardware and Paint Stores, Lawn and Garden Stores, Knife Shops, Home Goods. 
 
Sales Opportunity:
Nationwide company seeking representatives for outstanding line of domestic and imported products. Products span several different industries and offer top quality products and great pricing. Lines can be split to accommodate your area of expertise and customer base. Top commissions paid and full training and company support provided. Founded in 2010, we have been able to grow each year and now all we need is your sales ability and know how.
 
Company ID: 105427 - Click Here for Full Details
Product Lines:
We Design, Engineer, and Manufacture High Quality Optical & Audio Warning Devices for Municipalities, Public Works, Utilities, and Fleet Vehicles. 
 
Target Markets:
Automotive Aftermarket Distributors, OEMs, Government Agencies, and End-Users. 
 
Sales Opportunity:
As the Manufacturer Representative for our company, you will be responsible for developing, implementing, managing, and achieving the revenue growth objectives for your geographical area of responsibility. At the direction of the Sales Manager and General Manager, your main responsibility will be to prospect new distributors and end-user opportunities throughout the United States.
 
Company ID: 104854 - Click Here for Full Details
Product Lines:
Prefabbed Wood Panels for any Multi-Story Building - Delivered and/or Installed per Engineered Specs.

Includes Window and Doors Installed. Other options too, can do Metal Stud Walls. 
 
Target Markets:
Commercial and Residential Contractors, Architects, Engineers, Apartments, Condo Developers, Hotels and Motels Chains, Dorms for Colleges, Large single Family Homes. 
 
Sales Opportunity:
I will prefab all the wall panels and deliver them. Can install them if price is agreed. I can be onsite or a close distance away to save a lot of costs which reduces the total price. Other options are floor panels,install windows, doors, stairs, decks, siding, roofs.
 
Company ID: 100944 - Click Here for Full Details
Product Lines:
Architectural Metal Products: Steel Security Fencing, Steel Fixed Louver Fencing, Aluminum Fence, Aluminum Fixed Louver Fencing, Gates Systems, Sunshades, Sunshade Canopy, Railings, Security Grilles, Louvers, Perforated Metal Products, Trash Enclosures, Equipment Screens, Window Guards. 
 
Target Markets:
Our key markets are Architects and Contractors. Although we would like someone who has experience with both groups. It is Imperative you have an In Depth Knowledge and Relationships with Contractors in your Territory. We can supply you with information on the top firms in your market. 
 
Sales Opportunity:
This is an opportunity for you to represent one of the country’s leading architectural product manufacturers. Ametco is a company you can be proud of. We have been in the metal fabrication business for 50 years. Our products set the standard in quality and reliability featuring a 20 year warranty. Ametco products are highly specified. Our open territories have millions of dollars in quotes that need your help to close. Our competitive commission structure will reward you for closing those sales.

You will be provided with copies of quotations in your territory, as well as project leads. Our products are used on every type of construction project. We will work with you to perform AIA Continuing Education with the top design firms in your markets to keep your pipeline full.

We will supply samples of our products, literature, and any other support you need to be successful.

Ametco also promotes our products through trade shows and advertising. Submit a sales inquiry to us to find out the size of the opportunity in your market. We look forward to a mutually profitable relationship!
 
Company ID: 105337 - Click Here for Full Details
Product Lines:
WindTrans Manufacturers a Patented HVL (High Volume, Low Speed) Capable of Pumping 100 gals/min by Hand and 300 gal at 200rpm.

The Pump is Trade named Zelda. Zelda Pumps Forward and Reverse Easy to Clean Out a Plugged Inlets. Zelda is Self-Priming and will Lift 27ft. 
 
Target Markets:
Zelda Pump Weighs 42 lbs.- Portable-Used in Fire, Emergency, disaster Management, Flood Control. It Operates Manually Ideal for Transferring Water Liquids in 3rd World Applications. This Pump can be Used for Cleaning up Oil Spills. Military Transfer Fuel. No Cavitation ideal for Transferring Food Products. 
 
Sales Opportunity:
WindTrans is a sister company to Sun-North Systems, Ltd which has been in business for 30 years. WindTran's evolutionary pump is the only one of its kind with Patented technology.
 
Company ID: 105289 - Click Here for Full Details
Product Lines:
Custom Wood Stile and Rail Doors. 
 
Target Markets:
Sell to Door Retailers. 
 
Sales Opportunity:
Our company is a custom stile and rail wood door manufacturer. If you can dream it, we can build it. We can manufacture your everyday house package and entry units to large commercial projects with hundreds of doors. We have a full line of Fire Rated Doors and Wood Jambs from 20 Min to 90 Min for your needs. We also produce STC Sound Rated doors.
 
Company ID: 96708 - Click Here for Full Details
Product Lines:
Above Ground API Steel Storage Tanks built to API 650 (new) and API 653 (repair), Shop, and Field Erected 
 
Target Markets:
All Industries with above ground storage needs. 
 
Sales Opportunity:
Looking for experience steel tank reps, API field and shop built storage tanks.
Industries served. Growing company looking for motivated reps.

Asphalt
Food
Oil and Gas
Liquid Feed
Water
Chemical
Fertilizer
Other industries
 
Company ID: 80815 - Click Here for Full Details
Product Lines:
Composite decking and lattice. 
 
Target Markets:
Our reps will be selling to One or Two Step Distribution Centers that Service Lumberyards. 
 
Sales Opportunity:
This is an excellent opportunity for a highly motivated, independent sales representative calling on building material distributors, who is motivated and dedicated to breaking ground in a new territory. We are an innovative manufacturer of composite decking offering a first rate product at a very competitive price. Our company has been in business since 1966 and has been manufacturing our composite decking since 1996.

We are looking for reps with experience in the building materials industry. Our reps are supported with product knowledge training and installation methods. We offer the tools you need to be successful, for example, free samples and brochures, training, factory support and exclusivity in the sales territory.
 
Company ID: 103460 - Click Here for Full Details
Product Lines:
We are Trailblazing Telecom Carrier Engineers with 30+ years Industry Insight.

See Homepage Video for Designs in Layman's Terms. (Not Bill Auditors or Sales Folks Wearing Lab Coats). We Design, Broker, and Manage our Client's Telecom. (Highly Advanced Hired Guns; Far from the Typical Offering). 
 
Target Markets:
We Work with All Industries and Serve all Locations within the USA and Canada Focusing on the Small to Medium Size Business Market (50-5,000 employees). Phone Companies Pay Us to Join their IT Team as WAN Experts, Saving Client's Money and Aggravation. 
 
Sales Opportunity:
Ringside Partners (with insight shared by less than 1% of the industry!) is truly a ‘one of a kind’ turn-key telecom solutions provider that designs, brokers, and manages our client’s network and cloud environment. Our goal is to save our clients money and aggravation the correct way by taking an engineering approach to cost savings and network optimization.

We are a Carrier engineering firm who actually:
 Designed and built the phone company central office equipment
 Designed and built the telecom provider’s core networks
 Helped define the services you buy from those carriers
 And developed their provisioning procedures

This affords us the unique intellect and capacity to understand and address their deficiencies. Please allow me to acquaint you with the significant value-add that comes from a highly influential engineering firm handling the design, procurement, and management of your telecom accounts…at no new or additional fees than what you already pay today, just highly improved performance and savings.

We make it possible for downsized IT teams to survive and thrive in an age of budget cuts. Please submit a sales inquiry to us, and we will email a link for an intro video to explain.Thank you.
 
Company ID: 95463 - Click Here for Full Details
Product Lines:
The current product is (Trikleener) a 3 year old Tested, Proven, Patented, and Trademarked Attachment for Pressure Washers for Cleaning Flat Surfaces.

We are currently introducing a new model (Bikleener) specifically designed to appeal to Mass Merchandisers. 
 
Target Markets:
We are specifically seeking reps that Already have proven experience selling Product(s) to the National Building Materials/Hardware or Related Home Improvement distributors and retailers. We are also seeking representation in reaching the international markets. 
 
Sales Opportunity:
We will pay representatives or firms 20% of the generated income from the contracted accounts listed above. We will sign an "Independent Sales Representative" contract/agreement for specific accounts. If this fits your specific experience, Please submit a sales inquiry to us today.
 
Company ID: 104098 - Click Here for Full Details
Product Lines:
Corrugated Steel Pipe
Engineered Steel Structures
HDPE Pipe 
 
Target Markets:
Tunnel and Road Contractors
Mining Contractors
Infrastructure Sector
Mining Sector 
 
Sales Opportunity:
Our company is a Canadian manufacturer and supplier for Corrugated Steel Products for the Mining Industry and Infrastructure sectors. Our product lines includes steel structure for reclaim tunnels, conveyor tunnels, haul road bridges and grade separations, as well as retaining walls, and mine portals. We are interested in selling our engineered steel products in US. We are located in Guelph, Ontario, from where our products are shipped across Canada and worldwide.
 
Company ID: 78158 - Click Here for Full Details
Product Lines:
Mobile Fuel Tank Cleaning Systems, Stationary Automatic Fuel Polishing Systems. 
 
Target Markets:
City, State, and Federal Government Agencies that Store Diesel and Other Fuels for Generators, Pumps, and Vehicles. 
 
Sales Opportunity:
Our products are in use worldwide for de-watering and removing contamination from diesel, ethanol blended gasoline, heating oils, motor oils, and hydraulic oil tanks with no loss of product. A Manufacturer Rep program is now being implemented with exclusive territories. We offer technical support, training, and generous commissions.
 
Company ID: 101088 - Click Here for Full Details
Product Lines:
Skid Steer and Loader Attachments. 
 
Target Markets:
Implement Dealers. 
 
Sales Opportunity:
We are looking for a Rep to sell Loader Attachments in Michigan. Rep will be selling good Quality Heavy Duty Attachments. Rep will be paid a percentage of sales and will be paid at the end of every Month.
 
Company ID: 83616 - Click Here for Full Details
Product Lines:
Automatic Leak Detection and Water Shutoff System to Monitor All Water Entering any Structure.

System will Shut Off the Main in the Event of a Leak. Addressing $10 Billion in Claims Paid Out each Year by the Insurance Industry for Property Damage Caused by Plumbing Failures. 
 
Target Markets:
Architects, Mechanical Engineers, Home Builders, Plumbing Contractors, Security and Automation Integrators, Homeowner Associations, and Property Management Firms. Especially attractive to Second and Vacation Homeowners where Freezing Pipes are a Concern. 
 
Sales Opportunity:
The FloLogic System was first to market in 2001 and has best-in-class leak detection technology. FloLogic is a well recognized brand for the quality of its product and exceptional customer service. FloLogic delivers a solution to the perennial problem of plumbing leaks that have plagued homes and businesses since the introduction of indoor plumbing. Property and casualty insurance providers are now offering discounts to those who install a leak detection system. The FloLogic System can be installed indoors or outdoors, including below grade.In addition, the EPA and AWWA independently report 14% of water used in homes today it attributed to plumbing leaks. We save water!

In the third quarter of 2016 we will be introducing a WiFi connected platform along with iOS and Android apps to enable remote access to the System. In early 2017, additional product sizes will address customers with larger flow requirements than that supported by the current System.

We are now building our first rep network and need your input, leadership, enthusiasm, focus and participation. This is an opportunity to become recognized in an industry sector that will provide rapid sales and professional growth. Our models includes a Buy-Sell program to maximize your profit or commission based with annual performance incentives. If you are not selling your customers leak detection, someone else will! If you are a serious candidate, you need to contact us.
 
Company ID: 100710 - Click Here for Full Details
Product Lines:
Air Lifting Bags, Industrial Grade, for Lifting and Shifting all Loads, Damage Control Shoring Systems. 
 
Target Markets:
Railroad and Railway Industry
Mining Industry
Heavy Duty Industry
Heavy Machinery Industry
Industry
Offshore
Marine 
 
Sales Opportunity:
The product is unique and new to the market. It, without a doubt, is the best product with the highest quality on the market - 100% made in America. With this Air Lifting Bag, there is nothing too heavy to be lifted or shifted, from small machines to Locomotives. This product line will be ready for Sale May 1st.
 
Company ID: 58608 - Click Here for Full Details
Product Lines:
Rubber and Metal Expansion Joints, Metal Bellows, Metal Hose, Industrial and Hand-Built Hose, Sheet Rubber, and Cam & Groove Couplings. 
 
Target Markets:
Water & Wastewater, Mining, Power Generation, PVF. 
 
Sales Opportunity:
Unaflex is the largest manufacturer of expansion joints in the US. We are currently in our 43rd year in business and are family owned. The majority of our products are manufactured at our plant in Anderson, SC. We are seeking reps/rep groups for the Water/Wastewater, Mining, and Power generation industries.
 
Company ID: 65331 - Click Here for Full Details
Product Lines:
Eagle Pro offers a full line of Hydraulic Lifting Cylinders and Pumps.

We Manufacture our own products, from 5T up to 1,000T Lifting Cylinders, as well as Various Hand, Electric, Air/Hydraulic Pumps, Hoses, Fitting, and other Accessories. 
 
Target Markets:
Mining, Petro-Chemical, Rail, Construction, Rental, MRO, Foundation Repair. 
 
Sales Opportunity:
We are a very aggressive, new company to the US market. We are priced better than our competition and our quality level is on par with the market leaders in this industry. We started in the North American market in June of 2011 and have seen explosive growth in every distribution channel. This is a great opportunity to get started with a company that does business worldwide.

Our products are sold in Canada, Australia, Asia, and the Middle East. We offer exceptional commissions and have many opportunities for a highly motovated and effective sales force. We are looking for agencies/reps that have experience with high pressure (10,000psi) hydraulic products and/or systems.
 
Company ID: 64750 - Click Here for Full Details
Product Lines:
Flexible Packaging includes: Film Extrusion, Narrow and Wide Web Flexo-Printing, Laminating and Bag Manufacturing Products include: Stand-Up Recloseable Pouches, Polyethylene Bags, Roll Stock, Adhesive Laminations of Film, Foil, and Paper. Reflective insulation and radiant barriers. 
 
Target Markets:
Horticulture, Healthcare and Pharmaceutical, Pet Food and Treat, Food Grade, Rolls Stock Films, Converter (General Purpose, Courier, Lamination, Bakery, Industrial, Ice), Distributor/End-Users (Sheeting, Bags on Roll - PTO, Bags- Wicketed, Tubing, Top Sheets, Shrink Bundling, Film, Shrink Bags. 
 
Sales Opportunity:
Industry leader who is expanding and looking for experienced sales rep who have existing customer base to work with while developing new opportunities. We offer 25 years of manufacturing experience. Our versatility allows us to custom tailor vibrant, high-impact printing and packaging solutions that meet the most demanding product specifications.

We pride ourselves on our client-specific approach and strive to exceed the client expectations. Our in-depth consulting, extensive packaging options and team of experience support specialist enable us to provide a superior end product that is visually appealing, holds the consumer's interest and distinguishes a brand in a competitive marketplace.
 
Company ID: 99181 - Click Here for Full Details
Product Lines:
Commercial Hardware, Residential Hardware, Hollow Metal Doors, and Frames. 
 
Target Markets:
We are targeting the Commercial Contract Hardware Market. 
 
Sales Opportunity:
Our company was founded in 1986 as a manufacturer of commercial locks and hardware. Tell was originally established to service the niche category of selling commercial hardware to major retailers across the country. Since then, we have expanded its customer profiles to include Contract Hardware Distribution, Locksmith Distributors, OEM Manufacturers and the modular office industry. Our company now manufacturers Hollow Metal Doors and Frames in our Houston manufacturing facility. Today, there are a total of 6 Tell locations that stock doors frames and hardware for our distributor network.

Recently acquired by Spectrum Brands, we are positioned for significant growth in the coming years. We are looking for independent Contract Hardware Reps to fill the following states. N. CA, OR, WA, AK, ID, MT, WY, UT, AZ, NM, CO, ND, SD, NE, KS, MO, IA, MN, WI, VT, NH, CT, and MA.
 
Company ID: 99538 - Click Here for Full Details
Product Lines:
Extruded Aluminum Bracket with Rubber Clamps that Holds Landscaping Tools (Rakes, Shovels, Hoe's, etc.) to a lawn trailer.

This is a Very Creative Design that we have been Manufacturing on a Smaller Scale and Plan to Take things Nationwide. 
 
Target Markets:
Lawn Tractor Distributors, Landscaping Supply Companies, Trailer Distributors, Lawn & Garden Supply Companies, Retail, etc. 
 
Sales Opportunity:
This is a great opportunity for a rep that current sells to these type of accounts. You will NOT have any competitors and be in total control of your markets pricing. There's nothing like it made anywhere and will enjoy high commissions for very little effort. More importantly; get reorders via our website without having to see anyone in person.

We are making things super simple for all are Reps to order and approve credit for there account with in seconds. Not to mention, excellent quality of product with a life time warranty. Perfect product for making additional cash flow for your team. You will love this product and we plan to grow the line as things progress. But in your request quickly because we are going to hire Reps ASAP. Multi states available if it makes sense. Submit a sales inquiry to us right away and make your pitch on your organization.
 
Company ID: 101889 - Click Here for Full Details
Product Lines:
Commercial LED Lighting Fixtures and Bulbs
- Parking Lot Shoebox Replacements
- Cobra Head Replacements
- General Area Lighting
- Wall Packs
- Flood Lights
- High Bays
- LED Tubes
- LED Panels 
 
Target Markets:
Reps that only work with Electrical Wholesalers and Distributors
OR
Energy Service Companies that service to Contractors and End Users such as:
Warehouses
Shopping Malls
Auto Dealerships
Hospitals
Architects 
 
Sales Opportunity:
During this expansion period:
- Commissions rates are much higher than industry normal.
- Territories covered can be assigned as exclusive for companies with proven sales record.

- Almost all LED products are DLC Qualified and competitively priced.
 
Company ID: 103978 - Click Here for Full Details
Product Lines:
Engineered Products: Specialty Chains, Sprockets, Gears, etc.
Commodity Parts: Bearings, Seals, etc.
Control Systems & Upgrades
Machining & Fabricating
Engineers & Field Service both Electrical & Mechanical
Complete Machinery: Barge Unloaders, Railcar Dumpers, Barge Hauls, Lift Tables, & Tanks. 
 
Target Markets:
Coal Fired Power Plants
Steel Mills
Coal Terminals
Grain Terminals
Chemical Plants
Mining Industry
Manufacturing Industry
Construction Companies
Railway Industry
Winter Road Crews
Escalator Users 
 
Sales Opportunity:
There are multiple reasons why a highly motivated sales representative would want to contract with Energy Sales & Service. To start, we offer an industry competitive compensation, with our reps receiving 20% of the profit from their sales. We would also like to make it clear from the start that our commission package is not subject to a sliding scale.

We pride ourselves on being a diversified company with experience in multiple fields, as well as an extensive and varied product line. Your contract with us would include access to our Customer Support Team, Inside Sales Team, as well as current product literature. We currently have a large existing customer base, complete with contact information as well as a large lead sheet of potential customers in several available territories.

Sales representatives contracted with our company will enjoy the backing a respected industry name. The team here at Energy Sales & Service has also conducted extensive competitor market research, which allows us to offer ultra competitive pricing. Our contracted sales reps would also enjoy a relaxed atmosphere as our management is not interested in micro-managing their employees, or conducting endless employee meetings.

We do, however, offer excellent employee support and resources. Our high commission rates, paired with the high dollar value of our products, as well as continued support from our staff allows us to offer our representatives unlimited earning potential.
 
Company ID: 43569 - Click Here for Full Details
Product Lines:
Asphalt Based Roof Cements & Coatings
Fiberboard Tapered Edge & Cant Strip
Elastomeric Roof Coatings
Specialty Coatings 
 
Target Markets:
Roofing Contractors
Wholesalers
Distributors
Architects
Facility Maintenance, etc. 
 
Sales Opportunity:
Our Company has been established for over 45 years manufacturing various Roofing Products, we pride ourselves on high quality and being versatile with the changes in the industry. With our mix of goods and timely deliveries we make Sales Representatives jobs easy.

We are established with majority of the Major Roofing Distributors threw out the industry. We are fully committed to working with our Sales Teams to achieve market growth in any way, and we can handle any question, concerns, and make decisions in less than 24 hours.
 
Company ID: 103919 - Click Here for Full Details
Product Lines:
Durable and Compliance Labels and Documents.

Kitted Products as well for Large OEMs. 
 
Target Markets:
Outdoor Power Equipment
Electrical Parts & Accessories
Automotive
HVAC
Home Appliances
Medical & Diagnostic Equipment
Sporting Equipment
Medical Device & Consumables
Vehicle Safety Accessories
Recreational Vehicles (ATVs)
Power Hand Tools
Electrical Accessories/DIY
Automotive Aftermarket 
 
Sales Opportunity:
Searching for sales representation specifically on the West Coast (preferably Southern California and Mexico), as well as the Northeast. Also open to South West region (TX and surrounding states). These are virgin territories for us as we look to expand our reach into untapped markets across the United States. Production capabilities are diverse and redundant across the U.S. with our 20 facilities. We presently have representatives earning upwards of $250,000-$350,000 in commissions.
 
Company ID: 103896 - Click Here for Full Details
Product Lines:
Critical Sheet and Plate Metal Fabrication Weighing up to 20 Tons, Precision Machining of Metal Parts up to 8 ft x 10ft x 25 ft, Extensive Paint Capability of Parts up to 12ft x 15ft x 60ft, Xylan Coating, Cladding Inconel, We are an NQA-1, Appendix B Nuclear supplier. 
 
Target Markets:
Industrial OEM, Aerospace, Ag, NQA-1 Nuclear, Oil & Gas, Defense, Transportation, Mining. 
 
Sales Opportunity:
We have been in business since 1953. Our core competencies center around manufacturing metal components either as a single part or production basis. We gravitate towards items which require demanding technical support in precision machining of small and large parts, comprehensive weld procedures, material traceability and NACE requirements in coatings.

We are ISO 9001 Certified and carry a QA program in support of Nuclear NQA-1, Appendix B Safety Related Requirements. Full NDE capability on Staff. We have not worked with Reps a great deal in the past and are all ears to hear how you can help extend our markets.
 
Company ID: 103879 - Click Here for Full Details
Product Lines:
We are Seeking to Hire Independent Sales Representatives to Sell our Top Ranked Gutter Guard to Roofing, Gutter, Home Remodel, and Construction Companies.

We have a Patented Bracket that Makes Our System very Easy and Fast to Install. 
 
Target Markets:
Roofing, Gutter, Home Remodel, and Construction Companies. 
 
Sales Opportunity:
We offer 15% commission of the selling price. This is a very easy product to sell and we will train you. When you sign up to be a sales representative, you will receive your sales kit and everything needed to complete the sale. We currently have open territories in many states.
 
Company ID: 102998 - Click Here for Full Details
Product Lines:
1. Engineered "Sprung" Dance Flooring
2. Dance Performance Vinyl
3. Ballet Barres. For Theatres, Studios, and other Athletic Related facilities. Products are listed in CSI Divisions 096451, 096452 and 096516. 
 
Target Markets:
Architects, Specifiers, Theater Consultants, Contractors, Dance Studios, Aerobic Studios, Martial Arts Studios, K-12 Schools, Universities, Theme Parks, Dance Touring Companies. 
 
Sales Opportunity:
L'AIR International is an established manufacturer that is looking to expand its brand among specific US and international markets. We are looking for independent sales reps who have established relationships, who carry related products lines, and understand the construction specification process.

Reps will be required to promote the L'AIR product specification during the early design stages, and coordinate submittals and substitutions during the bidding stages. A mutually acceptable compensation plan will be negotiated to facilitate revenue earnings and growth for both parties.
 
Company ID: 102311 - Click Here for Full Details
Product Lines:
Fabrication, Machining, and Assembly.

We have the capability to manufacture and design a wide spectrum of components utilizing a variety of processes from laser cutting to CNC machining to paint and final assembly. 
 
Target Markets:
This is an exciting opportunity for someone in the Industrial OEM field. We Manufacture and Sell to a Wide Variety of Markets. Agriculture, Construction, Transportation, Mining, Exploration are just a Few Sectors that we presently deal with. 
 
Sales Opportunity:
We are looking for a motivated individualor group presently in the Industrial OEM market. We are a Canadian manufacturer that is ISO Certified with a strong focus on customer service. Located in Winnipeg, Manitoba, this is a great opportunity to team up with a manufacturer that is presently exporting to the mid-west US.
 
Company ID: 93901 - Click Here for Full Details
Product Lines:
Detail Cleaner that is Quick, Fast, Easy Cleaning, Saves Time, No Elbow Grease.

Removes Grease, Grime, Dirt, & Bugs. Anti-Fog Formula that Cleans & Prevents Fogging. 
 
Target Markets:
Automotive, Automotive Dealers, Motorcycle Dealers, Boat & Water Sports, Marinas, Classic Cars, ATV's, any OFF Road, Retailers, Semi Trucks, Snowmobiles, Hockey Stores, Ski, Snowboarding, Janitorial, Cleaning Companies, Welding Companies, Golf Stores & more. 
 
Sales Opportunity:
Our products sells themselves. View the video at & see all the surfaces that you can use this fantastic product on. Looking for the right sales force to take my products to the next level! Work hard & you will be successful. Volume sales, recurring sales, competitive pricing, & attractive commission!
 
Company ID: 96799 - Click Here for Full Details
Product Lines:
Combustion Technologies USA is a Private Corporation located in Sandy, Utah Providing Specialized Products and Services.

Focused on Equipment Performance and Maintenance Solutions. We Manufacture Filtration Systems, Lubricants, Diesel, Gasoline and Industrial Style Fuel Treatments, and more. 
 
Target Markets:
We are Looking for Reps that can be part of the Combustion Technologies Family. Reps that have clients in the Trucking, Mining, Racing, Manufacturing, Construction, Power Generation and Oil/Gas Markets. We have a Range of Specialty Products for All the Markets/Industries Listed above. 
 
Sales Opportunity:
We offer sales commissions from 10 to 15% depending on the market and product being sold. We are looking for companies/reps with established clients and that have an understanding in maintenance, trucking, mining, oil & gas, power generation and manufacturing operations.
 
Company ID: 101970 - Click Here for Full Details
Product Lines:
A Custom Line of Motorcycle, Auto, Trucking, Boating, ATV, Bicycle Mounting Systems.

Used to Hold Cell Phones, Personal Devices, GPS Systems, iPods, etc. Manufactured in USA. Highest Quality, Amazing Form, Fit, & Function, Price with a Lifetime Warranty. 
 
Target Markets:
Target market is Harley Davidson Dealers, all ATV and Side x Side Dealers. In Addition we welcome any Manufacturers Reps that have Access to Additional Markets such as Bicycle, Car, Boat, Truck, Snowmobile Literally Any Transportation Market. 
 
Sales Opportunity:
Our products are being distributed through Parts Unlimited and Tucker Rocky. They handle the mainstream Japan bike manufactures. We have sold a high volume to Harley riders but not into dealerships. We want to penetrate the Harley dealer market.

Our compensation is 20% of the dealer price for any mounting systems purchased by the dealer including reoccurring revenue over a 12 month period. Based on performance additional market areas are available such as bicycle market, car, boat, truck literally any transportation market.

Today the cell phone is a must take where every you go. Our one device holder carries all cell phone approach is unique in that it can be branded with a clients logo. In addition the market for personal device holders less than 15% penetrated leaving an enormous opportunity.
 
Company ID: 102249 - Click Here for Full Details
Product Lines:
Mobile Double Wall Tanks, Mobile Single Wall Tanks, Field Erected Tanks, Invert Management Systems, Hydraulic Catwalk Systems, Biomass Preparation Systems. 
 
Target Markets:
Oil & Gas, Pipelines, Refineries, Mining, Ports & Terminals, Industrial Agriculture, Construction, Environmental Remediation, Civil & Municipal. 
 
Sales Opportunity:
Mainland Machinery is a 2nd generation company, building strong on over 40 years of experience. We design and manufacture Double Wall Tanks that have been field tested in the Oil and Gas Industry but have applications across many industrial sectors. Our tanks are manufactured and engineered to hold up to the most rigorous environment that makes them ideal for the harsh climates of the oil & gas, mining and marine industries.

Our expertise is in providing innovative, solution oriented, products that are superior in both quality and safety. Our team is experts in manufacturing products that serve our customer’s needs; we have become leaders, regarded for excellence throughout Western Canadian.

In addition to providing superior products, at Mainland Machinery we are committed to excellence in our client relationships. From customer service, to sales and follow up, we believe relationship will define expectations and build referrals. We believe the best way to grow in new markets is to partner with individuals who are conscientious, professional, coach-able, passionate and successful and equip them to serve their own local market.

We are currently seeking out 15 – 20 Sales Agents across Canada and the USA to partner with us. We offer industry leading commission structures, marketing, technical sales training and support.

All applicants will be personally contacted. Conscientious - Coach-able - Intelligent - Prior Success - Passion!
 
Company ID: 92023 - Click Here for Full Details
Product Lines:
Concrete Admixtures that Stop the Moisture and Flooring Crisis, as well as Provide Waterproofing. This is a lucrative opportunity.

Superior Workability of Concrete in all Applications, Ready Mix, Precast, etc. Vapor Lock. The Worlds Best Concrete Repair Material, MG-Krete. 
 
Target Markets:
Architects, Engineers, GC's, DOT's, Ready Mix Providers, Contractors, End-Users, etc. 
 
Sales Opportunity:
This is a lucrative opportunity for a hard working AEC professional. We will supply you with outstanding support when you are promoting or selling our core products. Ours and our advocate company Imco Technologies only manufacture the highest Quality products. These products are easily specifiable and will result in permanent ongoing specs.
 
Company ID: 96444 - Click Here for Full Details
Product Lines:
NXKEM is looking for Chemical Sales Agents. We pay commissions BTW 25% TO 40% of the Sales Price. Inquire About Our Rainmaker Program.

We Market the our Brand of Disinfectants, Cleaners, Adhesives, Lubricants, etc,and a Complimenting Line of NXTEC MRO ITEM with access to a Million+ MRO Products 
 
Target Markets:
Any type of Facility: Schools, Healthcare, Manufacturing, Office Buildings, Government, Military, Transportation, Marine, Airlines, Lodging, etc. We have Access to Over One Million Products, so we Cross many Different Market Segments. 
 
Sales Opportunity:
You MUST have a Chemical Sales Background and have an existing book of customers to be considered. We Pay the Highest Commission Rates in the Industrial Sales Sector, so we only want rainmakers. We have a Jump Start Program that affords you even higher commissions. If you are a rainmaker, please submit a sales inquiry to us immediately!

Ask about the Rainmaker Program.

In our Jump Start Program - we offer a very lucrative commission kick off rates of between 75% to 100% of the Commissionable Gross Profits - that will help you "plant seeds," for your future. We also offer an iPad Program which will provide you with access to over One Million Products. If you are a Self-Starter and a Rainmaker -- we offer you a wonderful program to reach Financial Freedom!
 
Company ID: 103273 - Click Here for Full Details
Product Lines:
Metal Stamping and Screw Machine Products. 
 
Target Markets:
Buyers. 
 
Sales Opportunity:
I am writing to introduce A&S Manufacturing Co. Inc, an ISO Certified metal stamping manufacturer that specializes in custom parts, CNC turning, CNC milling with ”Just In Time” inventory, and a consignment program to meet your company’s needs.

At our company quality is the number one priority, along with cost-effective products and same-day turnaround on your HOT RUSH requirements. We have the ability to run 24/7 with fully automatic bar feeders attached to our screw machines. We also have a complete tool and die shop on the premises, which allows us to do all of our own tool making and maintaining in house.

Our presses run from 5-110 tons, with the largest measuring up to a 48” bed. We also have the ability to do multiple-component assembly, finishing, and even stocking for customers who meet minimum purchase requirements. What’s more, we deliver anywhere in the tri-state area with our own trucks.

A representative from ASM will contact you shortly to learn more about your metal stamping, machining, and assembly requirements. We hope you will take a moment to speak with them, and we look forward to meeting with you soon.
 
Company ID: 103230 - Click Here for Full Details
Product Lines:
Bio Fertilizer, Hydroponic Supplies, Grow Lighting, Liquid Fertilizer and Lighting Equipment, Extraction Technologies. 
 
Target Markets:
Cultivators, Fertilizer and Equipment wholesalers and Distributors, Dispensaries, Greenhouses, Retail Home, and Garden Centres. 
 
Sales Opportunity:
The Opportunity: Senior Sales Executive.

Green Sky Labs brings superior science, unique products, and patented technologies to the improvement and development of cannabinoid medicines, products, and plant cultivation to the Cannabis Industry. We are experiencing hyper growth and need to hire a Senior Sales Executive to help us keep up!

We are looking for a highly motivated and skilled individual that is passionate about sales in the cannabis industry and culture to join our team. The role will be responsible for developing our fertilizer sales business in North America. Our fertilizer line of business specializes in direct sales to larger operations. Familiarity with the larger Producers and Processors throughout United States and Canada would be an asset. Join us and grow your career with a strong and profitable industry leader offering competitive compensation, tremendous growth and development opportunities, and a people-first work environment. Come grow with us!

Position Type:
This is a full-time position reporting to the Vice President of Sales in Vancouver, B.C. We prefer candidates who have a strong record of high reliability and are based in the Seattle, WA area.

Compensation:
This position pays commission on all sales with base tiers available.
 
Company ID: 51356 - Click Here for Full Details
Product Lines:
LED Signs - Indoor & Outdoor LED Electronic Display Signage, and Billboards. Why LED Signage? Proven to be 900% more Attractive than Traditional Signage and can Increase Business Profits from 15% - 150%. This is a new form of Effective Advertising and is a rapidly growing industry in North America. 
 
Target Markets:
Sign Wholesalers & Distributors, Local Dealers and Installers, Architects, Retailers, Franchises, Small Businesses and Commercial Property Owners within their Territory. 
 
Sales Opportunity:
We are currently looking for professional representatives throughout Canada and United States to help promote and sell our LED Sign products and develop strategic alliances for our product distribution. LED Signs have proven to be a very cost effective investment for many businesses, saving thousands of dollars on advertising costs, by instantly displaying sales specials, promotions, social media, menu items and many more not just for years but decades.

As this technology is being introduced to the market its all about establishing a market share hold in this multi-billion dollar industry, so the potential earnings for this position is very lucrative. Our company is an established manufacturer for over 10 years providing all types of LED display products at and affordable price point and has built a great reputation as a quality manufacturer throughout Canada and is looking to expand its distribution portfolio throughout North America and abroad.

We are looking for experienced professional manufacture representatives with a proven track record of sales and marketing success for specific territories throughout Canada & United States. We offer to our chosen representatives a great commission and bonus structure with an unlimited earning potential with the intention of full time salary + commission employment for proven performance and sales targets achieved. Please submit your sales inquiry for more information on our company and services.
 
Company ID: 103113 - Click Here for Full Details
Product Lines:
Building and Concrete Restoration Specialty Chemical products for Maintaining, Preserving, Restoring, and Protecting New Construction, Concrete, Masonry, and other Architectural Surfaces.

Cleaners
Remediation
Sealers And Water Repellents
Interior Floor Care
EIFS Appearance System 
 
Target Markets:
Reps Recruit and Sell to Strong Distributors that will Stock Products and to Large Contractors and Government Maintenance Departments. Promotional Contact with Specifying Professionals, such as Architects and Engineers is important. 
 
Sales Opportunity:
These products are known in the industry with high performance is a key attribute of this line. This line is more extensive and unique than its competitors. For instance, our copper-stain remover was used recently extensively on the restoration of the U.S. Supreme Court building in Washington, DC.

Our company has an active R&D department that continues to develop new and unique products and products for unique projects. Reps are supported with product literature, training and direct access to technical resources in the Company. Our commission structure is competitive and designed to protect your territory.
 
Company ID: 40814 - Click Here for Full Details
Product Lines:
We are a China based company who has a Proven Track Record throughout the World.

1. Mold Making, Plastic Molding, & Metal Stamping.
2. PCB Design Engineering, PCB Layout, Rapid Prototyping. PCB Assembly Capabilities include SMT (Surface Mount Technology) & Mixed Technology (SMT + PTH). 
 
Target Markets:
Companies that are looking for Electronic Products, Mold and Molding, Casting Parts that offer Great Quality, Pricing and Customer Satisfaction. Our target customers are OEM Manufacturers Seeking Support in Product Development and Manufacture to Improve their Product Systems. 
 
Sales Opportunity:
Excellent Commission Structure and Protected Territories for Reps. Our company is very stable. We are also looking for reps Worldwide. Submit your sales inquiry for more info.
 
Company ID: 102946 - Click Here for Full Details
Product Lines:
Electric Commercial Mowers and Outdoor Power Equipment.

60" Ride-On Zero Turn Mower, 48" Stand-On Zero Turn Mower, 33" Self-Propelled Walk-Behind Mower, 20" Push Mower, Battery Backpack Blower, Battery Backpack String Trimmer, Hedge Trimmer, etc. 
 
Target Markets:
Target Market is Universities, Schools, Hospitals, Municipalities, Counties, Resorts, Hotels, HOAs, Condo Associations, Federal and State Governments, and Landscape Contractors. 
 
Sales Opportunity:
A truly one of a kind opportunity. We have developed our full range of commercial lithium powered equipment over the past 7 years and are now ready to increase sales. No other manufacturer is currently selling any type of commercial electric power equipment with all day run times and high quality construction.

All equipment runs all day for pennies instead of expensive fuel which could cost up to $40/day for each mower. Our equipment retails for more up front, but pays for itself in about 1/3 of it's service life and is 1/2 to 1/4 the noise of gas powered versions. Customers love the zero emissions and the low noise really sells. Demo equipment is available for making that final sale.

Some Federal and State tax credits are available to help make each sale. Reps are equipped with written materials for distribution and factory training is required to understand the products. Commissions of 5-10% available on equipment that retails up to $23K.
 
Company ID: 102915 - Click Here for Full Details
Product Lines:
High Performance Composite (CFRP) Systems Used in the Repair and Rehabilitation of Steel Reinforced Concrete Structures. Blast Mitigation, Structural Upgrades, Siesmic Protection, Corrosion Repair. 
 
Target Markets:
Calling on Specifiers, Contractors, Property Owners, Municipalities, DOT, DOD, Nuclear Power Industry, Utility Companies. 
 
Sales Opportunity:
Looking for commission only sales representatives to add our product line to their existing tool bag. The sales call for these products typically elevates to a technical discussion early in the sales process. Most projects will require product/project engineering support provided by our company in most cases. Our product line would be considered a very Niche product line.
 
Company ID: 100940 - Click Here for Full Details
Product Lines:
Aluminum & Stainless Building products.
* Aluminum & Stainless Railing w/Glass, Picket, and SS Cable Infill Options
* Aluminum Balconies
* Aluminum Sunshade Systems
* Stainless Hardware and Assemblies for Architectural Spplications 
 
Target Markets:
Residential Products: 1 & 2 Step Distributors, Lumberyards.
Commercial Products: 1 Step Distributors, Developers/GC's, Specialized Service Companies. 
 
Sales Opportunity:
Until 2 years ago ours was a full service company supplying materials and installation services to the building industry so our knowledge and experience runs deeper than just manufacturing good products. Even prior to then our focus has been to design,develop and engineer our core product lines with the intention to market and distribute across the US. We have also worked very hard acquiring the right people to build an infrastructure that can handle and support future growth.

Being the new guys on the "wholesale/distribution" block allows us to compete very nicely against our competitors offering a fresh alternative to customers and in cases where we are smaller to our competitors has been a great advantage due to the fact we can react very quickly to the customers wants and needs.

We are committed to grow this company and are looking for Independent representatives that can help grow this business across the US. Since we sell to commercial and residential markets it is important that we attract partners that have experience and relationships with both.

We have priced our products on a tier system to allow our customers to compete in the market they are selling in. The commissions for our sales representatives are also very competitive in the marketplace and will vary depending on the products and industry they are sold in. Please submit a sales inquiry to discuss more details and opportunities.
 
Company ID: 101996 - Click Here for Full Details
Product Lines:
High Strength, Structural Reinforcement Systems Designed for Buried Pipes, Tanks, Vessels, and any other Aging or Corroded Infrastructure.

Wide Range of Zero VOC Industrial Coatings and Composites. Chemically Resistant, Abrasion Resistant, and many other Specialty Polymers and Composites. 
 
Target Markets:
Oil and Gas Industry, Power Generation, Waste Water Industry, Mining, Chemical Manufacturing and Process Plants, Architectural, and Structural Engineering Firms, and Municipalities. 
 
Sales Opportunity:
Advanced FRP Systems provides a complete range of structural reinforcement and corrosion prevention products. All of our products are Zero VOC, environmentally friendly materials manufactured in the USA. We specialize in new applications for high strength carbon fiber reinforcement, specifically buried pipes, tanks, pressure vessels, among many others.

Offering commission up to 40%, we are seeking talented, knowledgeable and motivated sales agents to help expand our market throughout the world. Sales contacts in Oil and Gas, Power Generation, Wastewater, Mining or the Chemical industry is a must. We provide extensive training and sales support to help you succeed!
 
Company ID: 76416 - Click Here for Full Details
Product Lines:
In business since 1912, we are a Manufacturer of High Volume Precision Metal Stampings and Assemblies.

In addition to Tooling and Stamping we have Production CNC Capability (Normally Starting with a Stamping), Laser Welding, Laser Cutting, Metal Finishing, and Pad Printing. 
 
Target Markets:
We sell to OEMs in the following markets: Medical (Device and Drug Delivery), Automotive, Aerospace, and Consumer Goods. We also sell to Molding Companies that do Insert Molding. We would like to Penetrate the Firearms and Electronics Markets. 
 
Sales Opportunity:
We need Manufactureres representatives in Southeast, Northeast, and West coast US, Canada, and Mexico. Our company is one of the most respected tooling and metal stamping companies in the country and we are looking to partner with sales organizations that can help us grow and diversify.

Being a contract manufacturer we are capable of producing precision parts, on time for any industry. Our engineering and die design departments have the experience and skill to handle the most complex projects from prototype through production. We typically offer 5% commission on stamped parts and assemblies.
 
Company ID: 101957 - Click Here for Full Details
Product Lines:
Insulating Faux Polyurethane Stone Siding Panels and Accessories
Deck Post Covers
Column Wraps
Faux Stone Mailboxes 
 
Target Markets:
One Step Distributors, Ssiding and Decking Dealers, Retail Outlets, Contractors, Architects, Specifiers, and Lumberyards. 
 
Sales Opportunity:
We are the leading manufacturer of Faux Stone Panels. Our insulating lightweight products have the look and texture of real stone because they are cast from actual rock molds. We have been in business for 14 years with a proven track record of customer service and product durability.

We are the creators of the polyurethane faux stone panel and are the only manufacturer to hold a U.S. design patent on our panel system. This is a new program for independent reps with exclusive territories and a 6% commission. There are marketing supplies and training available. We have proven to be a strong seller wherever the products are actively marketed.
 
Company ID: 59988 - Click Here for Full Details
Product Lines:
EZ Log Structures are “Do-it-Yourself” Building Kits. Garden Houses, Cabins & Homes. We offer two business models, mass merchant sales and new for Sept 1, 2015, franchises. Product is Warehoused in USA and Canada. 
 
Target Markets:
Mass Merchants for our DIY program and entrepreneurs who are seeking a franchise. Can be added to an existing business or stand alone. 
 
Sales Opportunity:
Seeking quality professionals who can bring prospects to us for possible franchisees. We qualify the buyer and do the sale. Reps service and maintain the franchise outlet. Commissions are 7% of sales, full training. Financing for franchisee is available on approved credit.
 
Company ID: 94114 - Click Here for Full Details
Product Lines:
Weighing Equipment including Industrial Scales such as Floor Scales, Counting Scales, Truck Scales, Bench Scales, etc. Packaging Machine including Stretch Wrapping Machine and Supplies, Customized weighing systems, Raw Material such as Steel and Stainless Steel. 
 
Target Markets:
Business with Warehouses
Weighing Stations
Farms
Recycling Centers 
 
Sales Opportunity:
We have been designing and manufacturing weighing equipment for more than 10 years. We offer top line products at great low prices. We have 80% items in stock in our California warehouse. 20% made to order in our California work shop. We can customize any scales or weighing devices. We offer 10% commission to sales reps.
 
Company ID: 101392 - Click Here for Full Details
Product Lines:
LED Retrofit Lighting Solutions for 2x2 and 2x4 Troffers
LED Retrofit Solutions for Highbays Lights
New Lighting Solutions for 2x2, 2x4, and Highbay Lighting. 
 
Target Markets:
Any Commercial, Municipality, or Manufacturing Business. 
 
Sales Opportunity:
Our company is a national company partnered with Samsung to deliver one of the most energy efficient and economical lighting solutions in the market today. The money our customers save on energy reductions pays for the solution in a short period of time. Our national financing options allow our customers to buy the lighting solution and use the solutions as collateral.

We train our reps to fully understand how to deliver proper expectations to our customers. We have live support to answer questions for reps in the field. There is no ceiling on the potential customer base and commissions do not decrease with volume. Our product has a 5 year warranty on the driver and a 10 year warranty on the LED strips. We can help you deliver a superior product that with high level technical support.
 
Company ID: 101404 - Click Here for Full Details
Product Lines:
Our patented rooftop grease containment system will protect a multitude of industrial sites.

Petroleum based oils, hydraulic fluids and grease will be collected reducing safety hazards, roof repairs and environmental issues. We are the only true solution to the problem. 
 
Target Markets:
Manufacturers of screws, engines, paper or textile, cooling system discharge, chemical solvents, plastic production anywhere that discharges oils. Architects and roofing manufacturers can spec it into plans or work directly with plant managers or facilities maintenance personnel. 
 
Sales Opportunity:
We are a full service rep firm. Marketing material, trade shows, training, sales assistance and more. We are the only real solution on the market, the UL listed, patented product has been successful for years. We have standard sized units and can customize anything with ease. The possibilities are large as the industrial market is so expansive. We offer an excellent commission structure. Submit a sales inquiry to us to discuss things in more detail.
 
Company ID: 90149 - Click Here for Full Details
Product Lines:
Small Wind turbines; currently 10kW horizontally mounted turbines and 7kW Vertical Access Wind turbines, with four more new models to come within the next 18 months. 
 
Target Markets:
Farmers, agribusinesses, coops, ranches, stables, data communications centers, server farms, schools, colleges, hospitals, city parks departments, home construction companies, farm implement dealers, resorts, golf courses, outdoor entertainment venues, and home owners with large lots. 
 
Sales Opportunity:
After 12 years in R&D, and with no debt, this "small wind" turbine company in suburban St. Paul, MN was commercially launched in spring 2015.

With its exclusive, patented Zero Contact Transmission technology (ZCT), this company's new rep will be selling wind turbines that have a dramatic technology edge over all direct competitors, including comparably rated solar installations.

The company is seeking a sales representative for central and southern Minnesota, ideally living in the Twin Cities metro area. Previous sales experience, especially with mechanical products, is a plus, but not required. Expect 50% travel, but relatively few overnights.

We're seeking an expert communicator with vision, a fearless sense of adventure and boundless ambition. This opportunity is not for "just another sales job." It's an opportunity to become a "ground floor partner" in a "green, new technology company", poised for explosive growth! It will provide one very special individual with a lifetime of opportunity and the prospect of building significant personal wealth over the next five to ten years.
 
Company ID: 99329 - Click Here for Full Details
Product Lines:
Medium to Heavy Manufacturing/Fabricating.
With Standard and CNC Equipment
Currently Majority of Business being Generated within the Great Lakes Shipping Industry. 
 
Target Markets:
Markets within North America.
Focusing on the USA due to the current exchange rate.
Mining, Oil/Gas, Shipping, Heavy Manufacturing. 
 
Sales Opportunity:
A company that has a solid foundation which needs to expand it's business focusing more on the industrial side. Based in Port Colborne it is based in a central logistics hub by road rail or water.The company is constructing new premises on the south side of the Welland canal.
 
Company ID: 100478 - Click Here for Full Details
Product Lines:
Europe's Largest Producer of Decorative Steel Fencing, Commercial Fencing, & PVC Coated Chain Link is Expanding to North America.

Manufactured with the most Advanced Equipment Available & Currently Sold Through most Major Building Supply Chains in Europe. 
 
Target Markets:
Lumberyards, Building Supply Chains, Fence & Deck Companies, Landscape Firms, Hardware Stores, Mass Merchants. A Factory Direct to Seller Program in Container Quantities with Overseas Shipments. Buyers have cash or terms OAC. 
 
Sales Opportunity:
We are seeking a qualified leader to assist us in sourcing and managing a sales team to develop a network of retailers in the USA. This is a rare opportunity for a creative sales leader who has the skills to pioneer a product line. The successful individual or organization will be well compensated. Only serious and qualified sales inquires please.
 
Company ID: 101131 - Click Here for Full Details
Product Lines:
We Offer Over 300 Items in the Sink and Bowl Industry.

This line of products would include stainless Steel and Copper (16g,18g), for Kitchen Basins. A full line of Porcelain, Glass, Stone, Bamboo, Copper, and Bronze Bathroom Basins. 70 Sink, Bowl, and Shower Fixtures in 3 Different Finishes. 
 
Target Markets:
We are strictly Wholesale and Sell through Kitchen and Bath Dealers, Plumbing Suppliers, Fabricators of Granite, and/or Laminate Countertops, etc. Other Avenues of Sales would be considered. We do not sell to builders, plumbers, or consumers. 
 
Sales Opportunity:
We offer a 6% commission on everything in the book except 18g gauge stainless. 18 gauge stainless is used in competitive situations and to offer an aggressive price schedule we pay 3% on these items. Because we include shipping in pricing, we also pay commission on all shipping as well.

Our price books and brochures are free along with a 50% discount on displays for customers. All of reps have exclusive territories. We can supply almost any size job with 2 separate warehouses with 70,000 items available. Our delivery time is 1-3 days except for Western Texas and west of of the Rocky mountains it is 2-4 days.
 
Company ID: 84580 - Click Here for Full Details
Product Lines:
Modular Slip Rings, Slip Ring Assemblies, Custom Slip Ring Assemblies, Carbon Brush Holders, Fiber Optic Rotary Joints, Slip Rings for CCTV Cameras, Slip Ring - Fiber Optic Rotary Joint Assemblies, Hydraulic, and Pneumatic Rotary Joints. 
 
Target Markets:
Industrial OEM's within the Custom Machinery, Packaging Machinery, Robotics, Automation Machinery, Crane and Construction Machinery, Cable Reel/Winch, Electric Generators, Amusement Rides, Automatic Revolving Doors, Rotary Tables, Rotary Welding and, Remote Operated Vehicles. 
 
Sales Opportunity:
A 35+ year old, family owned, major global manufacturer of slip ring components, standard and custom slip ring assemblies and fiber optic rotary joints, with extensive experience, and an extensive slip ring product line and capabilities. Our company has two manufacturing facilities, one in the U.S. and one in the UK, and we are known for our quality products, innovative designs, and technology and superior customer service within all industries serviced. In addition, we are the North American sales agent for one of the largest offshore slip ring and rotary joint manufacturers which further increases our products and capabilities.

We offer an experienced product design team and ISO certified quality, as well as, a dedicated customer service team and trade show and advertising support. We are looking to identify and retain experienced, and aggressive representation, to assist us in the development of U.S. and international markets for our products. Reps with experience in solution sales of engineered products would be an excellent fit.
 
Company ID: 101133 - Click Here for Full Details
Product Lines:
Construction Products, Roofing Ventilation Products.

The Perfect Combination of Durable and Affordable Air Intake and Exhaust System. 
 
Target Markets:
Wholesale Cistributors, Retail Chains, Building Supply Stores, Building Materials, Home Improvement, Hardware Stores. 
 
Sales Opportunity:
This is an outstanding opportunity to be part of a growing international company. We offer the best quality products at an affordable price. Our company takes care of the sourcing of the products in Asia and is always looking for new products to launch. We offer great marketing tools for our independent reps as well as information sessions on our products. We are looking for independent reps across the country with connections in the construction industry.
 
Company ID: 75426 - Click Here for Full Details
Product Lines:
Our company Manufactures and Sells GNSS Signal Distribution Products, Solutions and Services We have the Flexibility and Technical Know-How to Design and Deliver Complete Solutions for your Unique GNSS Signal Distribution Needs. 
 
Target Markets:
• Public Safety
• Defense
• Wireless/Telecommunications
• Aviation
• Retail
• Government
• Manufacturing
• Railroad
• Car Rentals
• Exhibition Facilities
• Automotive Distribution 
 
Sales Opportunity:
This opportunity is tremendous because the market is large, the cost savings to the customer and the business process made simpler for the customer, makes for a "Must Have Solution". Our company is a leading innovator in the industry which custom configures GPS solutions to any customer's specific application.The company also has an exclusive patent on one of the products, making us a leader in the GPS solution space.

Rep support includes:
• Highest quality products from the global leader
• Partner Onboarding and Training
• Technical Assistance
• Sales Rep Kit
The commission structure is 10%.
 
Company ID: 95061 - Click Here for Full Details
Product Lines:
New Generation of Self Adhered Flashing Tapes - DrainFLASH and NewFLASH.

DrainFLASH Delivers New Drain Plane Technology Where it is Needed - at the Window and Door Break in the Building Envelope. NewFLASH is a Companion Product Without the Drain Plane for Use in Less Demanding Environments. 
 
Target Markets:
Reps would sell to Building Supply Companies and Distribution Networks Providing Support Through to Local Builders. 
 
Sales Opportunity:
The is breakthrough technology!

The first flashing tape to actually drain water away from the window opening insures fewer customer complaints and expensive callbacks. It has been in flawless field trials in coastal New York for two years and represents real value in it ease of use and its drain plane functionality. Adding inherently stable chemistry and you have a 40% lower weight, clean, cool white product that has demonstrated excellent compatibility with sealants and adhesives and unlike asphaltic systems safe for use on PVC windows.

The adhesive system is a high performance cold and high temp installable acrylic adhesive Adchem uses in dozens of automotive applications. The 40% lower weight polyethylene foam conformal layer has been proven over decades by Adchem as glazing tapes for America's leading window companies. These new modern materials are manufactured 60 inches wide enabling the builder to make single or two piece round tops and other unique shapes safely on the ground or in the shop for rapid and reliable installation. We provide additional standard widths such as 5 inch, 7.5 inch and anything up to 60 inches.

Current self adhered flashing tapes rely on a heavy mass of butyl or asphaltic materials to conform to the surfaces and actually channel water right to he edge of the window flange without providing a drain plane. They are messy in the heat and difficult to bond at lower temps. There is a need for this new functionality and compatibility.
 
Company ID: 100546 - Click Here for Full Details
Product Lines:
Metal Building and Post Frame Insulation Products. Roofing Products. HVAC. 
 
Target Markets:
Alabama, Tennessee, Georgia. Florida. 
 
Sales Opportunity:
We are a OEM manufacturer of various insulation products used in both commercial and residential applications. With the enhanced energy codes now in affect. We are expanding our business. Looking for persons with building materials experience. Calling on architects, roofing contractors. Commercial contractors. Recently we developed a patented roofing underlayment which is a game changer and we are looking for experienced reps to help us expand sales territory
 
Company ID: 100693 - Click Here for Full Details
Product Lines:
Products are Marketed through 3 Commercial Brands:

PROCITY® for Site Furnishings
VITINCOM® for Poster Cases and Bulletin Boards
VIALUX® for Convex Safety and Surveillance Mirrors. 
 
Target Markets:
Sales are Exclusively to Dealers/Distributors - some may be:
Catalogue/Online Shops
Outdoor Play Equipment suppliers
Outdoor Street Lighting Suppliers
Site Furnishings/Amenities Suppliers
Builders Merchants
School Supply Companies
Safety Equipment Suppliers
Display Product Suppliers 
 
Sales Opportunity:
We are currently not represented in North America and wish to extend our network beyond Europe. We are actively seeking re-sellers and exclusive distributors to build a profitable co-operation between Europe and North America in import/export. To do this we need boots on the ground to set-up these agreements.

This would entail developing and maintaining the clientele in the United States. Initially, we would consider a retainer on top of which you will receive a monthly commission on the net revenue of the company which have been invoiced and paid by the client. The nature of the clients and products is such that regular orders are frequent.
 
Company ID: 100662 - Click Here for Full Details
Product Lines:
Hotel Furniture and Vanities
Custom Cabinets
Bulk Cabinets
Valances
Granite and Quartz Countertops 
 
Target Markets:
Hospitality
Assisted Living
Multi-Family 
 
Sales Opportunity:
One-stop shop for multi-unit wood, upholstered, and stone product. We manufacture in Duluth, GA (near Atlanta) and import from various overseas manufacturers. The ability to self-produce AND import allows us to offer competitive pricing on quality product, maintain responsiveness to customer, at an affordable price.
 
Company ID: 98618 - Click Here for Full Details
Product Lines:
Our Products are Safe, Green, and Outperform the Competition.
Asphalt Release Agents
Cold Load Release Agents
Tar/Asphalt Cleaning Agents
Concrete Cleaners
Concrete Form Release Agents
Mercury Decontamination product 
 
Target Markets:
Health and Safety
First Responders
Construction Companies
Paving Companies
Utilities 
 
Sales Opportunity:
Our products work quite well. We support all our reps and their sales efforts even if that means we need to speak directly to the potential customer. We offer a competitive commission and take the risk of collecting from the customer (straight commission).
 
Company ID: 100288 - Click Here for Full Details
Product Lines:
European Made Wood, Wood/Aluminum Clad, and uPVC Tilt & Turn Windows as well as, In and Outswing French Doors, Folders, and Lift and slide doors.

Made to the Highest Quality Standards. 
 
Target Markets:
Architects, Custom Home Builders in the Design-Build Luxury Home Market, Light Commercial Developers, and to a Lessor Extent, Homeowners. 
 
Sales Opportunity:
Although the company has been manufacturing for nearly a century around the world, it is still relatively new to America and therefore has low brand recognition. The good news is that there is a certain level of cache that comes with being European made and selling in the luxury home market.

The company provides an abundance of marketing support to help Reps effectively tell the company's story and to give home owners and trade professionals that sense of pride in knowing that they are buying or specifying, a very special and enduring, European crafted product. Additionally, the company handles all pricing, logistics and technical support so Reps can focus their efforts entirely on the primary task of selling.

The company enjoys an enviable position in the luxury window niche from a price point perspective. Although considered a high-end product and every bit the quality of much more expensive lines, it is on the lower end price scale of the luxury window niche. This allows for the capture of sales in the full spectrum of the high end as well as the upper middle end, from customers who, realizing its competitive advantages and appeal to its European nature, are willing to spend a little bit more to get something special. Other competitive advantages include its unique cladding, its Passive Haus level of energy efficiency, and its obvious attention to detail as it relates to aesthetics and styling, materials used, its construction methods and its superior warranty.
 
Company ID: 99966 - Click Here for Full Details
Product Lines:
Kitchen and Bathroom Cabinets.
Closet and Storage Cabinets-Hanging rail and Built in systems.
Workshop Cabinets. 
 
Target Markets:
The Construction and home Improvement industry. Multi-Family Developers, Home Builders, Retailers, Designers. 
 
Sales Opportunity:
Ours is a family owned and operated company building the best quality cabinets since 1993. We have a state of the art manufacturing facility utilizing the most current CNC technology along with Old World Craftsmanship. The company's advantage: We use ALL 5/8" thick cabinet box material including backs and full tops on base cabinets and available in many melamine colors and Birch plywood. Soft close drawer systems available in metal and Wood Dovetail.

Our standard flat panel doors feature a 3/8" thick center panel. Numorous door styles, wood species, stain and Lacquer finishes available. We are looking for an experienced and motivated individual to help expand our business. If you have the qualifications to succeed and are interested in joining our team then submit a sales inquiry to us immediately.
 
Company ID: 99551 - Click Here for Full Details
Product Lines:
Outdoor Products.

The Best Umbrella in the World. Shade from Sunrise to Sunset and Will Not Blow Over. Our Cooler the Only Cooler that can be Attached to a Canopy Leg to Keep the Canopy from Blowing Away and Serve Cold Drinks. 
 
Target Markets:
Any Retailer that Sells Coolers or Umbrellas. We are Mom and Pop Friendly by Offering Free Freight on Qualified Orders. 40% Margins with Map Pricing Keeping a Fair Playing Field for Everyone. Sporting Goods, Pool and Spa, Patio Furniture, Variety Stores. And many more. 
 
Sales Opportunity:
This is a fantastic opportunity what could be better than selling one of kind patented products with no viable competitive products on the market. Start-up with experience, we understand margins, freight costs and the importance of packaging, all of our products are sold in boxes with graphic designs that put all others to shame.

We have samples available which is all you need to sell, along with you understanding what your selling by using the product before you attempt to sell it. This umbrella will keep you in the shade all day and will stand in a 20/30 MPH wind attached to virtually anything including the ground. To believe is to experience. Commissions are negotiable.
 
Company ID: 98698 - Click Here for Full Details
Product Lines:
Ceramic Fiber Products: Boards, Gaskets, Modules, Custom Vacuum Formed Shapes, Textiles. High Temperature Putty, Adhesives, Moldable Ceramic, Refractory Precast Shapes. 
 
Target Markets:
Steel Fabricators, Industrial Furnace Builders, Primary Steel Making, Casting and Forging Foundries. Petrochemical Plants, Heat Treaters, Investment Casting, Incineration, Boiler Manufacturers. 
 
Sales Opportunity:
With the weakness of the Canadian Dollar, our pricing, in US Funds, is very competitive. We manufacture custom refractory products that are in most cases repeat business. OEM's give us specs and drawings and we help engineer a solution for their high temperature applications.

We currently offer the industries fastest turnaround with ceramic fiber vacuum formed shapes. We have inside sales support with engineering and cad support. Average transaction is $2,500 and as high as $80,000. 99% of our customers are repeat business (within 12 months) with many consumable product sales, some customers ship weekly.
 
Company ID: 99383 - Click Here for Full Details
Product Lines:
Fire Pump Packages (Enclosed Fire Pump Packages, FirePak Horizontal, Split Case, FirePak Vertical In-Line)

Fire Pumps (FireSet End Suction Diesel & Electric, FireSet Horizontal Split Case Diesel & Electric, FireSet Vertical In-Line) 
 
Target Markets:
HVAC Design Engineers and Fire Sprinkler Contractors. 
 
Sales Opportunity:
Established manufacturer with solid reputation and innovative product line. Successful representatives in other US states sell over $1 million per year.
 
Company ID: 28344 - Click Here for Full Details
Product Lines:
Cloud Software saves tons of IT money for Government, Insurance, Construction, Transportation, Healthcare, Hospital, Small Businesses, and Corporate IT.

Cloud Software for Sales CRM, Safety, Insurance, Claims, Asset, Document Management. 
 
Target Markets:
Hospitals, Insurance Companies, Large Corporations, Municipalities, Transportation Companies, Taxi Companies, Governments, Non-Profit, Unions, and Domestic/International Companies, are all likely Candidates for our Cloud Software. 
 
Sales Opportunity:
All products residual income & help companies go green and reduce costs. Tracker Cloud software for contract, insurance, claims, asset, surety bond, & risk management. Departments include risk management, HR, IT, operations, claims, & insurance. Competes over other $100,000 software packages many businesses no longer afford. No setup cost, no overhead, fully hosted. Compete with salesforce, Oracle, and SAP. Global spending on cloud software will rise 17% this year to US $14.5 billion, according to analyst firm Gartner.
 
Company ID: 7989 - Click Here for Full Details
Product Lines:
High-Tech, High Efficiency Oil and Water Separators for Many Uses.

We can Make Any Size (Largest we've Done is 20,000 Gallons Per Minute) and we make very Small Ones too. Our Equipment is very Green, Gravity Operated, No Moving Parts, No Consumables. Customers Love It because Maintenance is Low. 
 
Target Markets:
Industrial Facilities
Airport Facilities
Power Generation
Chemical Plants
Oil Refineries
Stormwater Processing
Vehicle Maintenance Facilities
Consulting Engineers
Machine Tool Coolant Processing 
 
Sales Opportunity:
Represent a very technical company for sales to Industrial and Chemical/Oil plant separators for removal of oil from water or purify machine tool coolant. We can solve almost any problem of this sort and can recover the oil for reuse or resale. We have two engineers on staff that have experience in almost any application that might require separating oil from water.

We work in all major industries and a lot of minor ones. We have lots of technical information available to help convince customers and do a custom design for every application (we have standard size units, but do the design to ensure the appropriate size is chosen). We are the most technical company in the field. Our engineers (Registered Professional) have more than 30 years experience in this industry.

Dallas area based, but with jobs from Saipan to Rumania and from Argentina to the Arctic Circle. Generous commissions and exclusive US and foreign territories available. If there is a good opportunity, we can come to help sell your project.
 
Company ID: 93951 - Click Here for Full Details
Product Lines:
Wood, Fiberglass, PVC & MDF Columns
Wood Interior Patented Doors System
Hardwood Mouldings
Wainscotting Kits
Firewood, Logs, Bricks 
 
Target Markets:
Box Chains Stores
Lumberyards
Building Supply Centers
Millwork Distributors
Siding Distributors 
 
Sales Opportunity:
The company has grown to become one of the leading suppliers, Our company was established in 1999. We manufacture and operate out of a 60,000 sq ft state-of-the-art facility, continuing to lead the industry in offering the most advanced trend setting products following today’s modern technology. In order to maintain our competitive edge we continue to expand our product line and innovate.

We take great care in the production of our products to make certain they are environmentally-friendly, maximizing the use of raw lumber, and minimizing energy costs, by reproducing products from our bio waste.

This is a great opportunity for self driven, self confident, highly motivated Reps that want to make a six figure income out of a good commissions structure. We are now seeking commission-based sales agents with experience at selling architectural products. Submit your sales inquiry for more information.
 
Company ID: 98824 - Click Here for Full Details
Product Lines:
Leading manufacturer of gate operators for residential and commercial applications for slide and swing gates in AC or DC Models with Battery Back-Up. DC models can also be used as a solar only application. Additional products include various access control accessories. 
 
Target Markets:
Distributors of access control products.
Distributors and manufacturers of fence and gate supply.
Distributors of ornamental iron, steel, metal and lumber supply.
Installers of gate operators and access control products.
Fence contractors.
General contractors.
Architects. 
 
Sales Opportunity:
Manufacturer of American made gate operators is looking for highly motivated and talented representatives to penetrate new markets along with the opportunity to develop existing markets that already have a strong customer base. With a large selection of target markets there is incredible opportunity for growth.

We are positioned firmly for the next generation of technology and our dedication to excellence, customer satisfaction and quality workmanship is the cornerstone of our highly regarded reputation.

Your customers will be extremely impressed with our best in class warranty, money back guarantee, FREE showroom display, FREE product training, FREE marketing materials, joint marketing, in house tech support and much more. All these benefits will be the foundation of your sales which translate into your generous commission.
 
Company ID: 98816 - Click Here for Full Details
Product Lines:
Skid Steer Attachments - Brush Grabber, Root Grapples.

General Steel Fabricator, Duct Work, Smoke Stacks, Dust Collectors, Structural Steel. ASME Boiler and Pressure Vessel Concrete Forms. Contract Powder Coating. Vacuum Tanks (Code) Acid Tanks, Sheep Foot Rollers. 
 
Target Markets:
Cement Plants, Refinery, Constructors, OEMs. 
 
Sales Opportunity:
Been in business since 1934, family owned. We have the equipment, knowledge, and personnel to get the job done. We provided major RV manufacture with 60,000 plus chassis for their campers over course of 36 years.
 
Company ID: 28015 - Click Here for Full Details
Product Lines:
Engineered Products and Components from China, Taiwan, India, and Vietnam.

We Provide Aluminum and Steel Castings, Aluminum, and Steel Extrusions, Machined Components, MIM, PIM, Powder Metal, Forgings, Stampings, Drawer Glides, Hinges, and Assemblies. 
 
Target Markets:
OEMs, Product Manufacturers and Parts Suppliers looking to Reduce Costs while Maintaining or Improving Quality. Sales are made Primarily to High Level Purchasing and Production Personnel, Owners, and Executives that understand the Value of International Sourcing with Domestic Ease of Business. 
 
Sales Opportunity:
We are a well established, quality supplier with factories in Taiwan, China, India, and Vietnam. We are searching for qualified manufacturers representatives to help expand our business. We have expertise in numerous areas including assemblies, metal products, rubber and plastic, castings, and specialty fasteners. US based engineering and program management for smooth program flow. We offer a unique value proposition. We offer warehousing and KanBan deliveries.
 
Company ID: 97956 - Click Here for Full Details
Product Lines:
A Worldwide Manufacturer of Acrylic Products is Seeking Reps who will focus on our Higher Margin Specialty Acrylic Products.

For Applications such as Architectural Lighting, Wall Finishes & Panels, Glazing, Interior/Exterior Accents, Facades, and Kitchen/Bath Applications. 
 
Target Markets:
Architects, Interior Designers, and Industrial Engineers. Focus will be on Project Driven Specifications with a Focus on Architectural Lighting, Office, Retail, and Hospitality. We have Target Lists Ready and also look forward to input based on your pertinent experience. 
 
Sales Opportunity:
We can not keep up with inquires from designers and need help to get more specifications. We are a global company selling under a very recognizable name who is seeking to substantially grow our share in the architectural and design market across the US and Canada.

An aggressive yet intelligent approach is required that includes responding to incoming leads, developing new contacts, and working with current users to close on more business. Technical sales support, marketing materials and training is provided along with an approved AIA education course. Commission paid on each order place and is based on size of project and specific material sold. Submit a sales inquiry to us to learn more.
 
Company ID: 88962 - Click Here for Full Details
Product Lines:
Seeking Highly Motivated Representatives with Proven Sales Success to Introduce and Sell our Line of Structural PVC Columns, to Lumberyards and Building Supply Centers in New England, North East, and Mid West.

With a successful sales record in the South East we are now looking to expand. 
 
Target Markets:
Lumberyards, Building Supply Centers, Millwork Distributors, and Siding Distributors. 
 
Sales Opportunity:
Our companys' square structural PVC columns and square tapered PVC columns fill a well defined demand in the new and remodeling construction marketplaces. Our factory assembled columns utilize a miter folding technology, developed by our company in the early 90's, that remains a state of the art process today, and provides contractors with the best value in non-fiberglass, load bearing columns.

Very few column manufacturers have gone to the expense of tooling up to build this unique column and therefore, in many markets, we will be the only source of supply. A new column product that creates a win-win-win scenario for you, your customers and their customers.
 
Company ID: 95060 - Click Here for Full Details
Product Lines:
Portable Alternative (Solar) Energy Solutions
Collection and Storage Devices
Solar Lanterns, Flashlights, Radios, and Communication Devices 
 
Target Markets:
Sporting Goods, Outdoor Retailers, and Industrial Accounts, Consumer Electronics. Come see our newest products at CES-2015 in Las Vegas at the Las Vegas Convention Center, South Hall 4, Booth #35254, January 6-9, 2015. Bring your resumes and line cards. 
 
Sales Opportunity:
Our Portable Energy Solutions is in its infancy. Being a US Manfacturer, with some items sourced overseas, we are bringing our products back to US soil to be manufactured in Northern Nevada. Our commission structure is one of the best in the industry. This is an opportunity to displace some other companys that chose to go the route of the "Big Box" consumer warehouses to get their products to the masses.
 
Company ID: 97509 - Click Here for Full Details
Product Lines:
OEM Parts, Custom Metal Fabricated Assemblies,and Weldments.

River Steel Works with Sheet, Plate, and Shapes, from 12# Sheet Through 8" Plate. 
 
Target Markets:
OEMs, Engineering Firms, Energy Companies, US Corp Lock and Dams, Mining Companies, Electrical Utility Companies, Steel Mills. 
 
Sales Opportunity:
River Steel has been in business since 1954, with a strong reputation in steel fabrications. Our largest involvement has been serving Bucyrus International and Caterpillar, in their global mining markets.

While global mining has been the industry we've been most concentrated in, we're really a custom metal fabricator that has a history in marine fabrications, structural steel, industrial fabrications, specialty trailer manufacturing, and large endeavors with OEMs. We've built operator cabs, wall panels, control rooms, 100 ton trailers, hoppers, and industrial blower assemblies.

We have made large investments in capacity and equipment, and can handle 80,000# weldments and assemblies internally with overhead cranes servicing bays 60' wide and over 300' long. River Steel has worked with Fortune 500 companies and start-ups. We are ISO Registered and AISC Certified.
 
Company ID: 94156 - Click Here for Full Details
Product Lines:
Gas Lighter, Refillable Gas Torch, Special Design Torch, Butane Burner, Barbecue Parts, Rotisserie Motor, Gear Box, Fireplace, Gas Range, Kitchen Chest, Tool Box, and OEM/ODM Parts for Medical Device Parts, Sheet Metal, Small Parts of Plastic Injection and Rechargeable Batteries. 
 
Target Markets:
We are looking for someone who is able to carry our product lines sales to Home Depot, Costco, Target, Walmart, Lowe's, Mom & Pop, Retails, and other Manufacturing Companies for Parts. 
 
Sales Opportunity:
We are manufacturer with 30 years of experience of gas lighter, Gear Box, Rotisserie Motor and Indoor/Outdoor appliance, company is located in Los Angeles area, we stand behind our products and support reps 100%, that makes sales easy. We stock some of our hottest sale product lines in the warehouse. Your clients will never have to worry about the minimum order and tech support. We are willing to take low quantities with high standard of quality.

We provide competitive commission for our reps, we believed if you make sales we make sales, profits are for both parties to grow with. Our specialties are integrate electronic components to sheet metal or plastic parts, we had design many hot sale devices such as electronic control fireplace valve, thermostat rotisserie motor, electronic doorbell, LED control knob ergo mobilized station with rechargeable battery / rechargeable battery for hardware or any electronic device, IV stand, and more.

If you have projects that need a good design team and factory for it, we are the one you should be looking for, our team has experience to perform FEMA and Six Sigma during design and manufacture process.
 
Company ID: 94268 - Click Here for Full Details
Product Lines:
Environment First Printing has Brought to Market the First Bio-Based Toner Cartridge for Laser Printers.

With Over 650 Models, each one Saving 2-3 Liters of Foreign Oil each Cartridge by Using Bio-Resin. Every Toner Costs Less to the End-User than Staples or Officemax. 
 
Target Markets:
Every Business has Desktop Printers. Your Market is never ending. 7 out of 10 Businesses Purchase OEM Brand Toner, our Bio-Toner is a new line. It comes Below the Cost of OEM, it prints just as well, and it saves 3 liters of oil each toner. 
 
Sales Opportunity:
Every business in the united states uses desktop printers, every business in the country would be interested in cutting costs, and saving foreign oil if they knew it was an option. Can you tell them? How many people can you tell? Everyday millions of dollars are spent ordering Toner cartridges online from Staples and Office Depot. We can beat those prices, but also offer a better option for the environment, our country, and our US economy (Bio-Product is derived from US and Product is made in PA).
 
Company ID: 91179 - Click Here for Full Details
Product Lines:
Life Safety Tracker System, Fire Barrier Management Software, and Inspection Software for the Inspections of Fire and Smoke Dampers. 
 
Target Markets:
Healthcare, Hospitals, Nursing Homes, Manufacturing Plants, Universities, Hotels, Building Management. Calling on Facility Managers, Directors of Facilities. 
 
Sales Opportunity:
We have been in business since 1992. We are leaders in the passive fire protection industry. We are FM Approved and UL Qualified Firestop Contractors. We have developed the "Life Safety Tracker" - a Fire Barrier Management software program for the inspection of Fire and Smoke Dampers, which is the best in the industry.

This is a great opportunity for the right person who has contacts with Facility Managers, Director of Facilities. Fire and Smoke Dampers have to be inspected, by code, within the first of installation year and every 4 or 6 years. Documentation is essential for record keeping - the Life Safety Tracker Damper Module is the best on the market.
 
Company ID: 92262 - Click Here for Full Details
Product Lines:
A complete line of Commercial Roof Restoration Coatings.
Silicone both Standard and High Solids
Urethane
Butyl
Acrylic
Polyurea
In addition to coatings we also carry:
Single Ply Membranes
Polyurethane Spray Foam 
 
Target Markets:
Direct to Contractors and Distributors. 
 
Sales Opportunity:
With the enormous growth of our URE-A-SIL Restoration Roofing System, the need to have feet on the ground in the Western US is a major focus for us. 2015 is upon us and there is no sign of the roof restoration market slowing down. If you are based in the Western US, we would like to talk to you now. We have competitive commission rates and offer extra incentives for customers you bring on board. We have an in-house BDC working to find new contractors for you to call on.
 
Company ID: 96480 - Click Here for Full Details
Product Lines:
Personal Safety Electronic Flashing LED Products Vests, Belts and Jerseys Cyclists, with 3 Flashing Modes Fast, Slow, and Permanent.

All the products are available for adults and children. We have a one year warranty in all our products. We can make OEM products. 
 
Target Markets:
These products can be sold to Construction, Oil Drilling, Transportation, Trucking, Government, Sports Shops, Catalogs Companies, Motorcyclists, and Cyclists Shops. 
 
Sales Opportunity:
Our company has been in business for more than 5 years, we have distributors in The Netherlands, Belgium, Germany, Colombia, and Ecuador. We are looking for sales agents as well as for worldwide distributors, if you have the experience and the contacts, this is a great opportunity to make good commissions as a selling agent or as a distributor.
 
Company ID: 54402 - Click Here for Full Details
Product Lines:
Polished Concrete Systems: Treatments, Colorants, Densifiers Expansive Concrete Components and Densifers for DOT Bridges & Highways. Expansive Grouts for Oil & Gas Industry. Concrete Fiber. Integral Troweled Cure for Polished Concrete. Concrete grinders, abrasives and concrete burnishers. 
 
Target Markets:
Selling to Owners. Selling Division 03 and 09 to Architects. DOT and Government, Concrete Contractors, Distributorships. Oil and Gas Industry. 
 
Sales Opportunity:
We have a system sell. This is perfect for Independent Reps, we have a lot of products. High commision. Great to add onto existing lines. Education provided. We support you with a CRM system for tracking custormers, projects, leads and all products and pricing entered. This is performance based, commission only compensation.

Polished Concrete Systerm: Ph Neutral. No issues with hazardous waste disposal. Our line of Densifiers are not water soluble and do not contribute to ASR. Our chemistry will not resist color introduction or walk off, as is common with other chemistry.

The colorants are micro-pigments thus will not fade. Craftsmen are certified with in-depth training. Using Grinding, Honing and Polishing equipment designed for complete concrete processing that can expose aggregate (this is not janitorial equipment). Equipment is not electric, and does not require a 3 phase hook up.

Unless specified, our installers will process the entire floor including any and all wall edges. The process is wet, maintaining ambient air quality and ensuring no dust contaminates the HVAC system. Water enables a higher quality cut to the floor. The process IS NOT opening the concrete and applying a sealer. The floors include accountability through onsite management.

Shrinkage Compensating Concrete for concrete with no joints and no curling and no shrinkage cracks. This is a unique product. We have just added a line of product for the Oil and Gas Industry.
 
Company ID: 75668 - Click Here for Full Details
Product Lines:
Our company is a US Manufacturer of Industry Leading LED Tubes that save 50% or more on Commercial and Industrial Lighting.

The system offers a full line of Fluorescent Replacement Products from 1' to 8' with Multiple Wattage and Color Temperatures as well as Multi-Tube Fixture options. 
 
Target Markets:
The Independence LED Tubes are ideally suited for Long Run Time Areas of Buildings, for the Highest Return on Investment (ROI). These areas typically include: Parking Garages, Exit Stairs, Hallways for Hospitals, Dorms, Multi-Family, and Industrial facilities like Warehouses & Distribution Centers. 
 
Sales Opportunity:
We brought our manufacturing from China to Boyertown, PA over the summer of 2010. Our LED Tubes are Certified by Underwriters Laboratories (UL) and meet the Buy America standards of the American Recovery and Reinvestment Act (ARRA). This Company also offers comprehensive support services for its Reps.

We have led the industry with installations across the Fortune 500 and also won the 2013 Best Lighting Retrofit by the US Green Building Council for the Urban Green Award and the 2011 Green Business of the Year Award by the Main Line Chamber of Commerce. In addition to long run time property areas, our line of multi-tube LED fixtures are excellent energy saving options for Metal Halide high bays in Distribution Centers, Warehouses, and Factories.

We bring the Tube wattage from 32 Watt T8 Fluorescent to 12 Watts and from 400 Watt Metal Halide to 116 Watts with our LEDs. Our Manufacturer Reps benefit from selling into a "hot" new sector that delivers on the promise of energy reduction with paybacks inside of 3 years or Financing/Savings Share programs.

Buyers get cash flow positive results in the very first month with $0 down. We have sold one of the largest LED Tube retrofits in US History to a national auto service chain and buyers range from top financial firms to global insurance companies. Our sales record and quality US Made Tubes make this a potent opportunity for Manufacturer Reps that can provide an ROI "solutions".
 
Company ID: 94363 - Click Here for Full Details
Product Lines:
Toilet Partitions, Washroom Accessories, Lockers, Storage Equipment, Fire Extinguishers & Extinguisher Cabinets, Visual Display Boards, Projection Screens, Hand Dryers, Corner & Wall Protection, Floor Mats, Roof Hatches, Access Panel Doors, Cubicle Track and Curtains, Postal Specialties, Signage. 
 
Target Markets:
End-User Businesses
Local, State & Federal Buildings
Schools & Universities
Hospitals & Clinics
Malls
Stadiums & Event Centers
Property Management Firms & Condo Associations
Airports
Hotels, Resorts & Casinos
Fitness & Community Centers
Commercial Job Trailers
Medium to Large Corporations 
 
Sales Opportunity:
We are currently searching for experienced Independent Territory Sales Managers in your area. We are looking for individuals that currently have a book of business who want to add more product lines to your existing portfolio. You are not required to work exclusively with our company. Simply promote our products and services with your existing customers.

We are a proven 20 year old company based in Minneapolis. We are nationally recognized for our high quality products, service and competitive pricing. If you currently call on any or all of the market segments listed then this is a fantastic income generating opportunity.
 
Company ID: 87928 - Click Here for Full Details
Product Lines:
Architectural Cast Stone Manufactured to Simulate Natural Cut Limestone.

Used as a Masonry Product to Provide Architectural Trim, Ornamentation/Functional Features on Buildings and other structures. Including Select Stone Veneers, Fireplace Surrounds and Mantels. 
 
Target Markets:
The target market are Masonry Companies (and General Contractors who may have Masonry as a Self-Performed Service). You will also need to keep in contact with General Contractors, Architects, Builders, and Developers in your area to keep abreast of construction projects coming up in the future. 
 
Sales Opportunity:
A large nationwide cast stone manufacturing plant in the Midwest is seeking a dependable and energetic Independent Sales Representatives to present and sell Architectural Cast Stone products for both Commercial and large Residential projects.

You must have knowledge of architectural styles, designs and have some experience in the manufacturing methods and setting techniques by the masonry contractor. Training and Marketing Support are available for each Rep. We offer a very competitive Commission Based pay. We have immediate opportunities in the Midwest region.
 
Company ID: 90843 - Click Here for Full Details
Product Lines:
Diesel Fuel Additives
Fuel Polishing Equipment
Diesel Engine Power Performance Modules
Separ Filters 
 
Target Markets:
Agricultural
Construction
Trucking / Transportation
Municipalities
Diesel Repair Facilities
Fuel Providers 
 
Sales Opportunity:
We are a Canadian company specializing in diesel fuel and diesel engine performance improvements. We are working on the leading edge of providing solutions for diesel fuel and diesel engine related issues, using the latest in chemical advancements. Our value proposition is get clean, keep clean.
 
Company ID: 65867 - Click Here for Full Details
Product Lines:
Non-Woven Roll Goods made from Various Processes including Spunbond PP & PET, Needlepunch, Spunlaced, Carded Web, Nylon, etc. 
 
Target Markets:
Automotive Interior Trim Plants. Tier 2 Suppliers
Bedding Manufacturers
Roofing Industry: Products for Flat Roof & Membranes.
Packaging Applications 
 
Sales Opportunity:
We are a TS/ISO Certified company that specializes in the Converting of Non-Woven Roll goods for various end uses. We are very strong in the supply of our products to Automotive Interior Tier 2 customers. We are also involved in the supply of inner construction material to the Bedding and Furniture Industry.

We are capable of all slitting/re-winding and can also Perforate most of our products in line. Since non-wovens are virtually being used in numerous applications from baby diapers to oven mitts, we think this is a good opportunity for the right individual.
 
Company ID: 90666 - Click Here for Full Details
Product Lines:
Manufacture a Full Line of Standard and Custom Hydraulic Fittings and Adapters Ranging from 1/8" to Over 2" in Size.

Types of Fittings include SAE J514,J1453, JIC 37 Degree Flare, O-Ring, Pipe, Swivel, Bulkhead, Hose Barb, Flange, Metric, Brazed Tube and High Pressure Flat Faced O-Ring Fittings. 
 
Target Markets:
Distributors. Original Equipment Manufacturers (OEM's) such as Construction, Agricultural, Forestry, Lawn, and Off-Road Equipment Manufacturers. Distributors of Fluid Power Products. 
 
Sales Opportunity:
Increase your commission. If you are currently selling pumps, hose, and fluid power products, incorporate our line of hydraulic fittings. Our fittings will compliment your line. We can also build to the customers print,and engineer product for their application. We have a standard line of fittings and adapters in stock for immediate sale.
 
Company ID: 78089 - Click Here for Full Details
Product Lines:
Custom Rubber Extrusion Solutions (Gasket, Seals, Anti-Vibration Pads, etc.) to a Wide Variety of Industries. Materials include EPDM, Silicone, Nitrile, Neoprene, among many others. Complete In-House Tooling and Finishing Capabilities. 
 
Target Markets:
We currently sell all over North America, including Canada and Mexico. 
 
Sales Opportunity:
We offer the highest rep commissions in the business and an easy, no-nonsense working relationship with all of our reps. Territory protection can be reviewed and discussed on an individual basis.
 
Company ID: 87292 - Click Here for Full Details
Product Lines:
A Broad Range of Propriatary and Revolutionary LED Products, Focused on Commercical Applications for both Indoor and Outdoor Use. Over 75% of what we sell is U.S Made, Warranted and Commercial Grade. Lease to Own Options Available. 
 
Target Markets:
Virtually all sectors: Small to Medium Size Businesses, Retail, Warehouse, Manufacturing, Municipality, Hospitality, Schools, and Universities, Gas Stations, Large Corporations, etc.. 
 
Sales Opportunity:
US Manufacturer seeks business professionals, start up specialists, and entrepreneurs for a ground floor opportunity in an exploding LED industry. Selected Leaders thrive in a young, receptive, and growing market driven by 50-75% in Energy Savings, Improved Lighting Levels and Great Longevity of Products. Specializing in energy efficient solutions, this California based lighting manufacturer offers USA Made commercial products to ALL business sectors including; Office, Warehouse, Factory, Retail, Schools, Industrial etc.

The Regional State Manager position presents a unique business opportunity to potential candidates with very specific skill sets and those willing to invest in themselves. These candidates should be owner minded individuals accustomed to commission only structures and willing to build their business. If you posses the expertise in building a team and thrive in the sales arena, Titan LED would like to speak with you.

What we offer:
• Aggressive Uncapped Commissions
• FREE Lead Program
• LED Training
• Recruiting Support
• Leasing Options
• Competitive Pricing
• US Made Products
• LED product samples

What you bring:
• Entrepreneurial Spirit & Vision
• Talent to Motivate, Train, & Recruit
• Passion to Succeed
• Management Skill Set
• Experienced Sales Background
• Initial Product Investment
 
Company ID: 90110 - Click Here for Full Details
Product Lines:
Synthetic Roofing Underlayments and Housewraps. 
 
Target Markets:
Roofing Supply Companies, Lumberyards, Building Material Wholesalers & Retailers. 
 
Sales Opportunity:
We are a company based in S. California and looking for regional reps all over USA for oour newly introduced product lines. With our manufacturing facilities overseas we have an excellent productline that has been tested by several roofers and contractors and have received excellent responses.

The Sales Reps will have a great opportunity to work independently and will be able to represent this line of product and they do not need to necessarily work exclusively with our line so this would be a great opportunity for someone who is already involved in selling building products to generate a sizeable extra income by adding this line to their portfolio.
 
Company ID: 88798 - Click Here for Full Details
Product Lines:
Water Coolers, Water Filters, Air Purifiers, Air Washers, Air Dehumidifiers, Ultra-Filtration System for Water, Bag in Box Cooler, Undersink Water Chiller. 
 
Target Markets:
Importers, Distributors, Retailers, Installers. 
 
Sales Opportunity:
We are a leading manufacturer of Air and Water Products for the Home and Office. The company is extending its activities to Europe and it is a right time to get on board and maybe become one of our Country Sales Managers in the future. You must have an entrepreneurial spirit and high motivation to help us develop our business in Europe and the rewarding part will be to become one of the key people of the global company within a few years
 
Company ID: 88744 - Click Here for Full Details
Product Lines:
Lighting, Technology, Transformers. 
 
Target Markets:
Distributors, Escos, Utilities, Contractors, Consultants, Manufacturers, Architects. 
 
Sales Opportunity:
Tremendous opportunities worldwide in all of above markets. One of larget manufacturers in above markets. Low prices, Innovative products, inside and outside sales managers, R and D department, Manufacturing facilities, financial support, marketing material. Commission structure five percent with variation
 
Company ID: 64844 - Click Here for Full Details
Product Lines:
Plastic Injection Molding.

Thermoplastic Molded Products for all Industries, Optics and Clear Molded Parts, High Strength Mechanical Parts, High Tolerence Parts, and Insert Molding. In-House Mold Making Capabilities. 
 
Target Markets:
Electronic, Sensors, Optical, Material Handling, Automotive,Heavy Equipment, Medical, Dental, Fire Protection, Safety, General Industry. 
 
Sales Opportunity:
We are a high quality thermoplastic injection molder that has a great reputation for Servicing our customers. We have been in business for 27 years and have experienced a good growth track record. We have Openings for Reps that would like to work directly with the owners of the company.

Our Company is ISO9001:2008 Certified.
 
Company ID: 77328 - Click Here for Full Details
Product Lines:
CNC Machining Components, Stamping & Fine Blanking, Screw Machine Parts, All Type of Castings, Powder Metallurgy Parts, Plastics Injection Moulding Parts, Excellent Manufacturing Facilities, Very Competitive Price. 
 
Target Markets:
OEM’s, Auto Parts Manufacturer, Wholesale Distributors, Machine Shops, Construction Industry, Contractors, Power Coating & Paint Facilities, Electrical, Electornics, Medical and Aeronautics Components and Equipments Industries. 
 
Sales Opportunity:
We have very wide range of International and Local Qualified Supplier. Those are ISO and TS Certified. We are dealing with suppliers from all over the world. We can offer very competitive price with very good quality. We offer standard commission. We also offer Special incentives for target sales.

***Special Commission Package for 2013***

This is for calendar year starting 1st Jan 2013 to 31 Dec 2013:
$0 to $250,000 6%
$251,000 to $500,000 7%
$500,001 to $1,500,000 8%
Anything above the $1,500,000 8%+2% bonus!!
 
Company ID: 77879 - Click Here for Full Details
Product Lines:
PVC Deck and Ceiling System. 
 
Target Markets:
Building Material Distributors, Deck Contractors, General Contractors, Siding Contractors, Building Managers, Facility Managers, Property Managers, Drywall Contractors, Commercial Contractors, Siding Dealers, Contractors, Lumberyards. 
 
Sales Opportunity:
We are looking for driven sales representatives to market our Patented under deck and ceiling systems through an exclusive dealer/distribution network in their exclusive markets. Experience in the decking, remodeling, general contracting industries, as well as experience in the building material distribution field. Only "Hunters" need apply.
 
Company ID: 85575 - Click Here for Full Details
Product Lines:
Plastic Profile Extrusions.

Bumper and Tee Molding, J Cap, U Channel, Sliding Door Track, Price Ticket, Slatwall, and Custom Items. All Design, Tooling, and Production done under one roof. Specialize in Problem Solving. 
 
Target Markets:
Primary markets would be Display and POP Houses, Woodworkers, Furniture Manufacturers (Residential, Commercial, School, Institutional) and Full Line Plastic Distributors. 
 
Sales Opportunity:
Patwin Plastics is a 42 year old company that thrives on custom work and establishing long term customer relationships. Reps would have exclusive territory and no earning limits. Looking primarily for Midwest (Chicago area), Southwest (Texas) and Southeast (Virginia, Georgia) territories.
 
Company ID: 66271 - Click Here for Full Details
Product Lines:
Small Zinc Die Castings, Multi-Slide - Multi-Cavity. 
 
Target Markets:
Hardware, Locks, Automotive, Tools, Medical Equipment, Motor Components, Telecommunications, and Fasteners. 
 
Sales Opportunity:
High quality, low cost producer. Well established company. ISO 9001:2008, All manufacturing operations are in the Midwest. American Made, American Owned.
 
Company ID: 83589 - Click Here for Full Details
Product Lines:
- Gloves: Leather, Seamless, Sports, Mechanics, Safety, Industrial, ut Resistant, Heat Resistant, Water Resistant, Winter Sports, Bicycle, Baseball, Football, Ski, Cross Country, Motorcycle, Dirt Bike.
- Apparel: Bicycle, Baseball, Football, Safety, Industrial Protection. 
 
Target Markets:
Automotive, Industrial, Police, Army, Sporting Goods & Accessories, Retail Gasoline Service Centers, Bicycle, Motorcycle, Fitness, Golf, Ski, Utility Outlets, Departmental Stores, Fishing and Hunting, Gardening, PPE. 
 
Sales Opportunity:
If you are in existing market of any kind, selling whatever parts and equipments, you can carry a wide range of PPE as a side item "Accessory", handsome commission and locking the account in your name for ever as long as our product is sold on that location, will never sell to that company direct or indirect unless you release the account in writing. First Contract, your fee is 10% of gross sale, direct or indirect repeat orders 5%. US$1,000 sign in bonus. End of year quantity rebates, Territorial rights. 24 hours customer service, No minimum order. 100% free replacement or money back guarantee. Quality and pricing the most competitive in the industry. No middle man (direct from the factory). In case of territorial rights, existing accounts customer service compensation. Distribution Center in Ohio. Manufacturing facilities in Pakistan & China. Our gloves, Dayton, OH, and Sixstars Sports, Pakistan.
 
Company ID: 59063 - Click Here for Full Details
Product Lines:
Screen and Digitally Printed Products: Decals, POP, Magnets, Product Identification, Domed Decals, Graphic Overlays, Pressure Sensitive Labels, Nameplates, Banners, Caution, Notice & Warning Decals, Parking Permits, Deadfront Panels, License Plates, Pre-Spaced Vinyl Lettering. 
 
Target Markets:
Equipment Manufacturers (OEM): Medical, Electronics, HVAC, Sports, Agricultural, Restaurant, Automotive, Lawn & Garden, ATV, Exercise, Pool, Generators, Appliance, Computers.
Chain Stores: Home Improvement, Grocery Stores, Fast Food, Furniture Stores, etc.
Associations & Schools. 
 
Sales Opportunity:
Screen and Digitally Printing Products for over 40 Years. 2012 marked our 40th year in business. We reached $5,000,000 in sales and we want nothing more than to keep the momentum going with you in 2013. Everything we manufacture is done under our own roof, giving us total control and accountability to you. We have the fastest lead times in the industry and are able to turn a new order around in as little as three business days.

You will find that our quality, service and price is unmatched. We would like to share the success with you so we are looking to find a great group of independent sales representatives that are eager to start a wining relationship for years to come. You can expect a simple but hefty commission structure. Whether it's repeat or new business, you get paid the same. If you are interested in learning more about us and what we have to offer you, please submit a sales inquiry to us today.
 
Company ID: 82254 - Click Here for Full Details
Product Lines:
Our company Manufactures On-Site Portable Machining, Bolting, Tensioning Equimpent for the Power and Gas Industry. Sales, Rental, and Service. Need focus on driving products and services into all industrial accounts, such as Power Plants, Refineries, Mills, Mining, Chemical, Processing, and Food. 
 
Target Markets:
Power Plants, Chemical, Paper, Processing Heavy Construction, Mining. 
 
Sales Opportunity:
Sell world leading on-site machining, split frame clamshells for ID/OD pipe preps, boring bars, keyway cutters, CNC (x,y,Z) boring and threading. Bolting equimpent (Hydratight Brand) from 300 Ft.lbs torque to 37,000. Nut splitters, flange break-out and make up. sell portable onsite heat treating, pre/post weld.
 
Company ID: 82119 - Click Here for Full Details
Product Lines:
Medium to Heavy Fabricated and Machined Products/Attachments for Construction Equipment, Tractors, Excavators, Railroad Cars, Mining Equipment, etc. 
 
Target Markets:
Construction Equipment Manufacturers, Locomotive Manufactures/Rail Car Manufactureres. Road Construction Attachment OEM's, Mining Equipment Manufacturers. 
 
Sales Opportunity:
Our company is in process of expanding our Capabilities. We are currently suppliers to large OEM"s like Caterpillar, Deere, Bomag Americas, Electromovtive. With the increased capacity we are creating at our facility, we finding a need for a seasoned rep. We are seeking an individual who has the contacts and experience in the construction equipment manufacturing areas of the industry.

We need help taking our company to the next level with steady production type products of either a simple or complex nature. We are open to a generous commission base for the right individual. We staff in house engineereing and are ISO 9001 certified. We have been in business for nearly 30 years.
 
Company ID: 81991 - Click Here for Full Details
Product Lines:
Steel Llighting and Transmission Poles. 
 
Target Markets:
USA and Canada. 
 
Sales Opportunity:
Company under new and professional management is expanding its manufacturing capabilities and organizing networks for marketing and finishing of poles. Your contributions to the company's growth and success will be handsomely rewarded. All sales inquiries will remain strictly confidential.
 
Company ID: 76004 - Click Here for Full Details
Product Lines:
ECOBUST is the most powerful Expansive Controlled Demolition Mortar. For Sensitive Jobs where Blasting or Conventional Mechanical Methods of Demolition are Not Permitted or Preferred. 
 
Target Markets:
Construction, Demolition, Concrete Contractors, Demolition Contractors, Renovation, Homeowners. Mining, Quarrying. 
 
Sales Opportunity:
Seeking Manufacturers Reps interested in working together to help expand our distribution and sales into key markets such as commercial, retail, government, quarrying, mining. We are also providing leads for government bids and some others from trade shows. Opportunities available across USA and Canada.
 
Company ID: 79212 - Click Here for Full Details
Product Lines:
Locksets, Hardware, and Bath Accessories. Offers Styles and Finishes that Coordinate with our Multipoint Trims. Premium Kitchen and Bathroom Faucets Manufactured in Italy. 
 
Target Markets:
Designers
Showrooms
Dealers
Architects 
 
Sales Opportunity:
Our company is a unique, hybrid company, with non-traditional approaches to the sale of products. Our sister company for example, is an AIA/NKBA provider of CEU courses, and recognized for innovative marketing techniques. You can find out more information about them online. We want to work with people who are aggressive, think out-of-the-box, and recognize the very difficult climate under which a sales representative and manufacturer has to operate these days.
 
Company ID: 80275 - Click Here for Full Details
Product Lines:
Metal Castings; Sand Castings, Gray Iron, Ductile, Die Castings, and Forgings. Machined or as Cast. From Very Small Castings to Castings over 30 Tons. 
 
Target Markets:
Mining, Construction, Agriculture, Railroad, Dredging, Coal, Industrial, and Other Industries. 
 
Sales Opportunity:
Supplier/manufacturer of castings and machining looking for experienced sales representatives in select territories in North America. We supply steel sand castings, gray iron, ductile, die castings and forgings including machining. From small castings to very large castings in excess of 30 to 40 tons. Industries served are construction, mining, railroad, dredging, agriculture, and variouse industrial accounts. We also can supply other metal stampings, etc.

U.S. based with China manufacturing operations. Easy communications, financing, logistics support, technical support, door to door service. Over 30 years of experience with Asian manufacturing.
 
Company ID: 79955 - Click Here for Full Details
Product Lines:
Induction Lighting: Street Lights, High Bay Lights, Parking Lot, and Garage Lights, Loading Dock Lights, Flood Lights, Tunnel Lights.

LED Lights: Ceiling Troffers, Utility, Cove, Canopy, Vapor-Tight, Retrofit Kits, Screw-In PAR, and A-Type Lamps.

Custom Made Specialty Lighting. 
 
Target Markets:
Municipalities, Power Companies, Industrial Users, Large Retailers, Electrical Supply Wholesalers, ESCOs, Distribution Centers, Airports, Convention Centers. 
 
Sales Opportunity:
Green is in. With energy costs soaring and pressure for large organizations to become sustainable, Our company tackles the low hanging fruit - Lighting. With payback in the 12-60 month range and product lifetimes of 50,000 hours to 100,000 hours+, we can provide return on investment of up to 100% per year!
 
Company ID: 75581 - Click Here for Full Details
Product Lines:
Quartz Surfacing Slabs for Countertops, Vanity Tops and other Interior Design Applications. 
 
Target Markets:
Kitchen & Bath Dealers, Architects & Interior Designers, General Contractors, Home Builders. 
 
Sales Opportunity:
Quartz Surfacing is the fastest growing countertop category and our Company is one of the few worldwide that manufactures this kind of product.

Our Quartz Surfacing is the most innovative quartz surfacing material. Highly stain and scratch resistant - it is the ideal product for any indoor surfacing application such as countertops, vanity tops, writing desk, wall cladding or any other application natural stone can be used for.

This beautiful and durable non-porous material is easy to clean and never needs sealing or polishing – a distinctive advantage over granite, marble, limestone or soapstone, which all require routine maintenance. Available in an array of colors, our quartz is the product of choice for nearly all environments, including residential, commercial, hospitality and healthcare projects. Also is available in colors that are covered by a proprietary PATENT, making those colors impossible to be duplicated by other competitors.

This Material is stocked in one central location and it can be shipped anywhere and still be competitive in each regional market. For larger project also we have the capability to sell directly to fabricators in containers shipped directly from our manufacturing facility. As a LEED contributing product, our quartz surfacing is also the ideal surface for any GREEN project.
 
Company ID: 73306 - Click Here for Full Details
Product Lines:
MFG of Canvas and Web Products for Military, Industrial and Commercial use. Bags and Cases,(hard and soft)gun covers, straps and tie downs, sound absorbtion blankets and sewn products made out of vinyl, canvas, neoprenes, laminated,coated fabrics, ducks, hypalons and EMI fabrics. 
 
Target Markets:
Defense suppliers, military and any industrial and/or Commercial companies needing sewn products. 
 
Sales Opportunity:
100+ year old company looking to add reps with existing customer base and contacts. Looking for reps in all parts of U.S and Canada. We maintain and manufacture to over 10,000 NSN part drawings maintained on our state of the art manufacturing system. We also have an in-house staff of engineers and CAD/CAM system operators. Our 50,000 + square foot manufacturing facility is located in Boston, MA and inspectors insure that all finished goods meet or exceed required specs. Our military quality assurance system complies with Mil-I-45208 and all defense documentation is executed in accordance with DOD-D-1000 levels.
 
Company ID: 70331 - Click Here for Full Details
Product Lines:
Gazebos, Pavilions, Cabana's, Pool Houses, Pergola's, Custom Sheds, Pedestrian Bridges, Decorative Bridges, SunRooms, Playhouses, Cabins, Amphitheaters, Arbors, Trellises, Garden and Leisure products, Site Amenities.
Multiple options with most products 
 
Target Markets:
Landscape Designers, Landscape Architects, Government Affiliates, Municipalities, Schools, Churches, Consumers, Military, Architects, Businesses, Property Developers, Park and Recreation, Pool & Spa Installers, Landscape Contractors, Independent Landscapers, Engineers. 
 
Sales Opportunity:
With over 6,000 garden and leisure products to choose from we offer very generous commissions on upscale, high end designs. Most products can be completely customized with multiple options to meet your clients needs.
Our large structures such as Gazebos etc.can be designed online through our famous Structure Wizard. This interactive web tool makes it easy to show your clients what they are really looking for. (Let them Build their design of their dreams!!) With over 21 years in business and thousands of satisfied clients, we are leaders in our industry. Things of interest: Professional sales assistance 6 days a week, AAA plus with BBB, Quick lead times on most products, Limited lifetime warranty on most products, Most of our products are manufactured right here in the USA and we ship worldwide!
Please inquire about our Partners Program which offers multiple opportunities for additional revenue. We also offer national installation service on most products. With our own in house logistics department we have the ability to offer the lowest freight rates in the industry.
 
Company ID: 107143 - Click Here for Full DetailsNew Profile
Product Lines:
High end central vacuum. Brushed aluminum. Three times more powerful than industry standards for portable machines .
25 years warranty on products.Also offering others line of central vacuum made of steel for lower budget project. Warehouses in the United States and Canada . 
 
Target Markets:
All central vacuum retailers in United States
Our brushed aluminum line is exclusive with a protected territory
The steel line is open to all ( Plumber, Electrician , contractor, building manager with possibility for people without wall installation to use our central vac 
 
Sales Opportunity:
Known since 1980 for its European concept of matching ceiling fans and lighting with home décor trends, Nadair is also a long-time manufacturer of central vacuum systems resold under private labels. Three time more powerful than industry standard for portable machines it is becoming part of the basic standard appliance with new construction.
 
Company ID: 107142 - Click Here for Full DetailsNew Profile
Product Lines:
Furniture
Commercial Furniture
Residential Furniture
Seating
Chairs
Seating
Tables
Tabletops
Home Furnishing 
 
Target Markets:
Restaurants
Hospitality
Hospitals
Medical Clinics
Interior Designers
Architects
Commercial Offices
Professional Offices
Furniture Retailers
Outdoor Furniture 
 
Sales Opportunity:
My company owns the largest furniture manufacturing factory in Israel/Palestine, and we have been selling our products successfully across Europe for many years (decades), and are now expanding into the North American market! We have received numerous inquiries from attending a few initial trade shows to gauge interest, and we have already landed one client who is one of the largest restaurant furniture distributors in the USA from just 1 conversation, and are currently in talks with one of Canada's largest retailers.

Our furniture products are unlike what we have seen across the USA. Rather than dull weak plastic furniture, our products are extremely vibrant colors and extremely strong and durable with unique designs. Our key differentiator is our durability of fiberglass-reinforced-plastic. Since we are the manufacturer and factory owner, our pricing is extremely competitive, and we can meet tight shipping deadlines of less than 30 days manufactured overseas and landed domestically, and we also have the capacity to meet any level of demand.

Our product has been huge hits across Europe, and we are certain that it will do even better in the USA and Canada.
 
Company ID: 106633 - Click Here for Full DetailsUpdated
Product Lines:
You would be selling a large selection of custom stainless steel, glass, assembled bathroom module, all types of hardware, shower enclosures, assembled aluminium balconies, and many other kinds of components. 
 
Target Markets:
Geographically, our target market is North America, Europe and Oceania. Our customers are primarily suppliers, importers, distributors, bathroom retailers, architects, and interior designers. 
 
Sales Opportunity:
We are a western management style sourcing organization for Asia. Our unique benefit is the fact that we can produce products that meet the expectations of western quality, but with the cost benefit of products being manufactured in Asia. We are able to source a huge selection of custom stainless steel, glass, assembled bathroom assemblies, hardware of all types, shower enclosures, assembled aluminum balconies and many other kinds of components. On top of this we can also customize special items in order to fit our customers various needs.

We started off in the export of high-end bathroom showers, toilets, sinks and glass, and expanded to all types of products.  Now we are involved in everything from the export of lighting, custom ceilings, doors, custom wood work, marble desktops, to custom balconies, complete housing modules, and electronic devices. Our biggest customer markets are in the UK, EU and Australia.  We are very interested in expanding to the USA and Canada.

We are looking for partners with at least a basic knowledge of our current products and either existing clientele or the ability to seek out new clients fast. Let us know if you are interested. We can help your clients better source bathrooms and kitchens out of Asia, with an emphasis on low cost, high quality and custom designs. Some of our current sales reps make $1M-$3M per year by commission.
 
Company ID: 107137 - Click Here for Full DetailsNew Profile
Product Lines:
LED lights, Home sound systems, Muffler Tips 
 
Target Markets:
Retailers and wholesalers 
 
Sales Opportunity:
McNeil Enterprises is an Export Import agency company. You will make lots of sales and money with our company. I'm a retired U.S. sailor that knows how to get the job done, we make things happen. I have a degree in business, and a hard working attitude developed in the Navy. Work with me, and let's do big things.
 
Company ID: 107124 - Click Here for Full DetailsNew Profile
Product Lines:
Residential Kitchen/Bath cabinetry.
The offer only American-Made cabinetry.
Our in-house offering is hand-made, offering incredible flexibility.
While our primary function is residential, we can accommodate select commercial cabinetry opportunities for doctor offices and bars. 
 
Target Markets:
Builders, Interior Designers, Architects
Our goal is to develop relationships with builders who value creativity and quality product. Developing relationships with the professionals who specify our product (architects and interior designers) is equally important. 
 
Sales Opportunity:
This is an ideal opportunity for an Independent Outside Sales Rep who calls on Residential Builders, Architects and Interior Designers for building products other than cabinetry.

If you've got a active territory and you already cater to the above noted professionals, adding cabinetry as a product offering can offer growth to your bottom line.

We're a small proactive firm offering fantastic design solutions with quality product. You need only generate leads, we'll design and quote; and can jointly work together in closing the sale.

While we can be cost-competitive, our strength is in our ability to problem solve and execute.

Commission is straight commission on the gross sale to the buyer.
 
Company ID: 107113 - Click Here for Full DetailsNew Profile
Product Lines:
Demolition hammers and attachments used in heavy construction, rock breaking, and demo work. 
 
Target Markets:
Construction market, construction dealers, or any market that sell equipment used to peform rock breaking functions 
 
Sales Opportunity:
US based brand of high quality and moderately priced construction equipment attachments with above average commissions that allow most reps to sub-rep our product line while still making a sizable commission. With over $2 million of parts and product inventory located just outside of Boston all of our reps get more that just standard factory support. We insure growth and success for all of our reps. We can't win unless you are able to sell and make money!
 
Company ID: 99114 - Click Here for Full DetailsUpdated
Product Lines:
Concrete Repair, Cement, and Epoxy Grouts, Marine Pile Repair and Protection, DOT Repair Products. 
 
Target Markets:
Distributors, Engineers, Industrial Contractors, Heavy Highway, Bridge, and Marine Contractors. 
 
Sales Opportunity:
Commissioned based sales. High quality specified grouts and repair materials. Innovative solutions in the industrial, marine and DOT markets. World leader in our field for over 55 years.
 
Company ID: 107108 - Click Here for Full DetailsNew Profile
Product Lines:
s a professional capapcitors manufacturer established in 1998 based on more competitive price and excellent service.
Our whole products seriers:ceramic capacitors,film capacitors,mica capacitors aluminume electrolytic capacitors ,tantalum capacitors. 
 
Target Markets:
distributer of capacitors / electronics components / manufacturing company of LED/ VEDIO/ MOTOR/ FAN/ AUTIO and any other manufacturing company that relate to the electronic manufacturing . 
 
Sales Opportunity:
Capacitors are still growing fast and huge needs are required in the market , after years of develepment , we have services more then 1000 clients all over the world with our 12 professional producting line and more more then 850 experienced and high skill workers . we will be you right choice in the capacitors manufactuing field
 
Company ID: 105926 - Click Here for Full DetailsUpdated
Product Lines:
Corporativo BORO

--Mexican Hose Manufacturer--

We Have 40 years Experience Innovating within Product Development, Manufacturing, and Distribution in the Gardening, Hardware, and Industrial Markets. Our Flexible PVC Hose Products are Vended at Mexico and Fourteen Countries at The Americas. 
 
Target Markets:
Distributor
Retail
Nursery
Lawn & Garden Suppliers 
 
Sales Opportunity:
We are currently looking for distributors or sales reps in the United States carrying garden, hardtools and hardware products.

When you Partner with us you will find:
- Robust, trusted and durable hoses under a recognizable Mexican brand. Our main clients, maintenance and contractor workers, buy our products at local hardware retail stores at Mexico and other Latin American countries.
- Light weighted durable hoses for home gardening, patio cleaning and car washing. Bought at self-service retail chains by housewives and young urban men.
- Plumbing, LP gas, air and industrial fluid low pressure conduction hoses. Plumbers and mechanics can find our hoses through our business partner network.
- Innovation of new hoses not seen on the market, aimed to help the environment and fulfill our final consumer’s ecological and fair social trade consciousness.
- For our business partners we offer products with trustful meterage, and variety of designs, assured deliveries, product guarantee, technical support and brand publicity.
- Manufacture your personal hose using your brand. Here we have helped our business partners with product development, consignment and final distribution.
 
Company ID: 96033 - Click Here for Full Details
Product Lines:
Low Pressure Steel Boiler. 
 
Target Markets:
Contractors, Engineers, Property Management, Industrial, Processing Plants, Warehouse, Breweries. 
 
Sales Opportunity:
3 pass down draft boiler, steel boiler, 15 psi steam, 30 psi water, boiler is designed to fit through a standard doorway, 83-85% efficiency, built accordingly to ASME standards, commission TBD.
 
Company ID: 107054 - Click Here for Full Details
Product Lines:
EuroLine Windows,a private Canadian company that is an innovative manufacturer of custom-made, high-end,high-performance windows and doors for private residences and commercial buildings. EuroLine is one of the largest manufacturer of uPVC style tilt & turn windows and doors in North America 
 
Target Markets:
As a manufacturer’s representative, you will promote EuroLine Windows and its products to home owners, builders and architects in your respective area. You will represent EuroLine and increase awareness of the company and products through sales calls, personal visits and presentations 
 
Sales Opportunity:
As out Independent Sales representative you will be Visiting and making presentations to architects, builders and developers. Contacting prospective customers. Doing blueprint take-offs. Preparing quotations and closing sales deals

This is commission-based position with significant earning capacity
 
Company ID: 106564 - Click Here for Full Details
Product Lines:
Field Service Management Software as a Service Solution - SaaS Sold by Subscription. 
 
Target Markets:
Heating and AC Marketplace for Distributors and Contractors, Landscaping service Industry, Building Maintenance Industry, Manufactures who Need Quoting and Sales Process, or Companies with Field Techs. B2B and B2C. 
 
Sales Opportunity:
We are looking for Reps who can sell into distributors and contractors in North America. Field Management Service SaaS software to help companies become paper free and automated. The software is very customizable and easy to use. This helps them service their customers better, make more money for the business, and they get paid faster. Set-up fee starts at $995 and up.

Program Details for Reps:
– 20% Commission for licensing for 12 month service
– 15% Commission for Set-up Fees one time fee
– Recurring commission plan
– Lead Generation Program
– Sale Training
– Spiff Program
– Co-Marketing Materials
Background in Software

Licensing Models:
1. Freemium Model for 1 user
2. Silver License $19 per user per month
3. Gold License $29 per user per month
4. Platinum License starts at $39 and up per user per month

Features of Software:
* Sales, CRM, Quoting
* Customer Management
* Work Order Management and Estimates
* Drag and Drop Dispatching
* Invoicing
* Reporting
* Alert & Workflows via email/SMS
* Service Agreements
* API to other Applications
 
Company ID: 107021 - Click Here for Full Details
Product Lines:
Our main products include 40-500W LED Lights and Induction Lighting including Street Lights, Shoe Box Lights, High Bay Lights, Flood Lights, Tunnel Lights, etc. 
 
Target Markets:
Commercial Construction Contractors 
 
Sales Opportunity:
We have a strategic partner in China, most of our products are UL and DLC listed. We've partnered with another company in US market and they will perform after sale service. Our company was established in 1999 and is located in Shanghai, one of the best known economic regions of the Western Pacific. We specialize in electrodeless induction lamp technology research & development and energy-saving applications.

Our company has over 50 patents on electrodeless induction lamp products. It also earned the title of the Shanghai High-Tech Enterprise Award. We have also obtained UL&CUL, CE, CB, SAA, FCC, CREDIT CARD COMPANY, ISO9002, ISO14001, and numerous other Certifications.The products have been used in many important projects such as Shanghai's indoor stadium, the Shanghai World Expo Garden, Beijing Tian'an'men Square and in many buildings of the top 500 enterprises in the city.
 
Company ID: 107013 - Click Here for Full Details
Product Lines:
Our Product has the Power to Interface to Multiple Database Sources.

The Powerful Back Office Component is the Foundation for Entry and Retrieval of All Data. Data is Validated a the Point of Entry, Eliminating Dual Entry, and Ensuring Quality and Reliability of Information in the Primary System. 
 
Target Markets:
Construction
Rail
Oil & Gas
Health Care
Environmental 
 
Sales Opportunity:
You do not have to be located in Texas in order to work for our company.

Our company is looking to expand in the United States. We are looking for Professional Sales personnel to lead the charge of this growth. If you are self reliant, a self starter with computer, medical, pharmaceutical or software sales experience--then we want to speak with you. If are you interested in working for a company who's product is well respected in it's field and the country.

Looking for 3 representatives to start by 10/16.

Job Description:
Calling on leads provided by our Marketing Department.
Closing skills needed
Draw/Commission
 
Company ID: 107010 - Click Here for Full Details
Product Lines:
Chemical Lines - Surface Retarders, Decorative Concrete Chemical Lines. 
 
Target Markets:
Construction General Contractors, Engineering, and Architectural Firms, and through our Distribution Channels once an End-User is identified. 
 
Sales Opportunity:
Our company has an amazing opportunity for a well established manufacturer's rep to own the business for our 3 new products in the Texas region.
 
Company ID: 107007 - Click Here for Full Details
Product Lines:
flooring products 
 
Target Markets:
architects, designers, hospitality 
 
Sales Opportunity:
I have worked in the flooring manufacturing Industry for over 20 years. Commercial: including print, tufted, commercial resilient, carpet tiles, etc. Clientele: architects, Designers, Hospitality, Senior living, floor dealers, end-users and multi-family. Knowledge of the Alberta trade industry.
 
Company ID: 107005 - Click Here for Full Details
Product Lines:
Our Emergency Automatic Gunshot Lockdown System is a fully automated gunshot detection, emergency notification and lockdown system for indoor/outdoor applications.

This integrates with IP cameras, access control and public address systems. 
 
Target Markets:
educational, government, military, commercial building owners, malls, theatres, stadiums or any place the public convenes. Most popular with K-12 schools and critical infrastructure. 
 
Sales Opportunity:
This product is a state of the art automated gunshot detection, notification and lockdown system that addresses a growing epidemic. It is easily retrofitted into existing structures. It is scalable and very low profile. We will provide training and support. Product is made in USA and carries warranties. Leverage your existing customers and provide them with an extra tier of security that is fully automated.
 
Company ID: 106967 - Click Here for Full Details
Product Lines:
Concrete treatment and sealing product that actually penetrates into the concrete and evacuates salt, acid, oil and other materials that are embedded.

Prevents additional materials from penetrating. Our Product is Water based, non-toxic, non-hazardous and is safe to use around plants and animals. 
 
Target Markets:
Entities that own, build or maintain concrete roads, bridges, parking garages, stadiums, seawalls, food production and chemical manufacturing facilities, waste water treatment facilities, damns, retail and warehouse space. New construction as well as maintenance and repair on existing concrete. 
 
Sales Opportunity:
We have been around for over 20 years and have focused mainly on a few states department of transportation with a limited sales force. This is our first effort to hire sales reps for a proven product with a 20 year success history. All territory is wide open.
 
Company ID: 91132 - Click Here for Full Details
Product Lines:
40 Years in Business, Growing Industrial Valve Manufacturer/Supplier.

Lance Industrial Valves. Stainless Steel & Carbon Steel valves up to 6000 PSI. Two Piece and Three Piece Varieties. Butterfly, Gate, Globe & Check. 
 
Target Markets:
Oil and Gas, Off Shore, Chemical Processing, Steam, Municipal, Building and Construction, Equipment Manufacturers. Sell to Distributors, Contractors, End-Users, and OEMs. 
 
Sales Opportunity:
We are looking to expand our distribution network and need you to help us! Will be looking for someone who is energetic and self motivated to help sell our products. We have accounts with nationwide distribution companies with regional business that can be expanded to other areas. We have an aggressive growth strategy to expand our current products and start offering new ones. Be a key part of this growth!
 
Company ID: 106963 - Click Here for Full Details
Product Lines:
We are looking for new reps to sell our flame and gas solutions.

This includes our line of smart hazardous (combustible and toxic) gas detectors, network-enabled gas detection system controllers w/ web appliances, flame detectors, and telecom solutions. 
 
Target Markets:
The type of customers we are looking to sell to are facility/plant/fleet managers, engineers, service providers, and contractors. These customers are found in applications such as AFV maintenance facilities, wastewater treatment plants, oil and gas manufacturing plants, and telecom sites. 
 
Sales Opportunity:
We are always looking for more "feet on the street." This is a great opportunity to partner with a top-tier supplier with 35 years of experience in a highly regulated industry. Our products carry numerous third party approvals including Underwriters Labs, Factory Mutual, and Safety Integrity Level ratings; and comply with most relevant international standards. We have deep technical experience and the resources to advise, develop and integrate the correct facility safety solution. We are always available to assist our reps, and provide consistent training programs and webinars to ensure our reps have the most current knowledge.

Competitive advantages include, but are not limited to: lowest time to install, commission, and recalibrate; low maintenance and replacement costs; support for advanced analytics; integration with any external system or cloud; and numerous industry approved and required approvals and certifications.
 
Company ID: 106941 - Click Here for Full Details
Product Lines:
Aluminum Die Casting Products
Gravity Die Casting
Pressurized Die Casting 
 
Target Markets:
Automotive
Transformers
Robots
Aerospace
Engines
Turbines 
 
Sales Opportunity:
We are a manufacturer for Aluminum Die Casting parts. We have expertise in precision engineering market using Aluminum Die Cast. We have in-house tool design and simulation team. We are looking at expanding our business into US market and at present are looking for Sales representatives from US.
 
Company ID: 106927 - Click Here for Full Details
Product Lines:
Retail and Restaurant Fixture Provider Focused on Casework, Millwork, and Furniture.

We're a Custom Job Shop and Batch Run Facility with In-House CNC, Edge Band, Stainless Fab, Upholstery, and Solid Surface. Work in Laminates, Veneer, Plastics, Composites, Paint, and Stained Goods. 
 
Target Markets:
We are Looking to Target the Retail and Restaurant Industry both Direct and Through Middle Providers when necessary. 
 
Sales Opportunity:
We are a young and growing company looking to grow our presence in the retail and restaurant fixtures market place. For the last 20 years we have been manufacturing exclusively for our parent company, developing our skillset and shop capabilities. During that time we have been the sole provider of manufactured goods for a number of national restaurant chains.

While also acting as the project and construction management branches and the procurement and fulfillment center for over 650 locations. We believe that combination of skills provide a unique value proposition to both small and large brands across a broad spectrum in retail and restaurant industries.

In an effort to continue our growth and diversify our client base, we are looking to add a sales partner. The sales partner will be relied upon to bring enthusiasm to the position, along with an established client base to the table. This person must be self motivated, have a strong knowledge of the manufacturing industry as well as the targeted market base. A great and exciting opportunity with unlimited potential.
 
Company ID: 95820 - Click Here for Full Details
Product Lines:
One of the Fastest Growing Transport and Logistics Companies in the US.

Our Team Qualifies Local, Regional, National Shippers, which Helps us Identify and Execute the Right Equipment Plan of Action. You will be Marketing Transportation Services to Anyone who Needs their Products Shipped. 
 
Target Markets:
Shipping Companies, Manufacturing Companies, Distribution Companies, Wholesale Companies. Any Company that Needs their Products Moved and Delivered by Truck, Rail, Boat, or Airplane. 
 
Sales Opportunity:
Our company is looking for reps/account managers that want to make money and with us you will but the question is: Can you find and be an opportunity hunter? Everything must be transported some how, just look around you. Receive income from every load from every company you sign up as an account and maintain it. Example: You sign up ABC123 Manufacturing. That is your account, you are the account manager. You take care of it and maintain it. We handle all the back end work, you don't.

For every load request we receive from ABC123 with your name as the account manager on it to transport their inventory (product), you receive 5% of that load. Now multiply that over and over again not by one company but multiple companies you have on your client list and you can see the potential income you will receive. You will receive direct payment on the 15th and the 30th of every month. Example: 15th you're paid for the 16th through the 30th of the previous month.

You will receive an invoice of the loads for that particular pay period to show how well you are doing or not doing and need to stop over to your client to talk to the transportation manager or whomever handles the transportation of goods for that particular account. You need to be their best friend! If the client's inventory doesn't get shipped, they don't make money and neither do you.
 
Company ID: 106855 - Click Here for Full Details
Product Lines:
This Company Markets to the Home Automation Industry.

They Develop, Manufacture, and Distribute Energy Saving, Quiet, Intelligent, Wireless, Interior Shading Systems for Commercial, Residential, Hospitality, and MDU (Multi-Dwelling) Applications. 
 
Target Markets:
You will be responsible to sell this amazing opportunity primarily to individual and group-based dealers that access the skills necessary to install and sell "smart home" related products and services. 
 
Sales Opportunity:
• The “Connected Home” space is currently a $10+ Billion Market that is expected to grow at a CAGR of close to 40% - to over $40 Billion by the year 2020.
• The North American market is the most advanced in the world with a quickly growing base of “smart homes”. These “smart homes” increased from 10.5 Million to 17 Million homes in the year 2015 alone.
• 30 Million homes will add “smart home technology” over the next year.
• Control 4’s 1st Qtr. Revenue was up 34% YOY with Year End growth projected at over 25%. Control 4 is one of the fastest growing Home Automation manufacturers in the space.
• New homes with automated lighting control has increased from 6% to 12% in the last 2 years.

We are eagerly seeking experienced and qualified manufacturer representatives to deliver us to the "next level". Submit a sales inquiry to us to let us know why you are who we are looking for.
 
Company ID: 106839 - Click Here for Full Details
Product Lines:
Sheet Metal Products. 
 
Target Markets:
Contactors, Engineers, other Rep Companies. 
 
Sales Opportunity:
Been in this industry Sheet Metal Business (roofing Products) for 25 years. The long term relationships that give you a second look at bids also gives you jobs that are not being bid on.
 
Company ID: 106838 - Click Here for Full Details
Product Lines:
Full Service Precision Sheet Metal Fabricator.

Blanket Orders and JIT Programs Welcome. 
 
Target Markets:
Telecommunications
Banking/Money Machines
Food Service
Transportation
Military
Commercial Lighting 
 
Sales Opportunity:
Family owned sheet metal fabricator in business for 50 years! State of the art equipment in 100,000 sq ft. factory. 24 hour turn around on quotes. Willing to work with blanket orders/JIT programs. ISO certified. Short to long runs.
 
Company ID: 106827 - Click Here for Full Details
Product Lines:
DIY Powder Coated Aluminum Railings, Picket, Glass, and Scenic Topless.
DIY Powder Coated Secondary Pipe Handrail. 
 
Target Markets:
Distributors, Buying Groups, Lumberyards, Renovation Centers. 
 
Sales Opportunity:
Straight commission based. Full inside sales support. Industry leading manufacturer of DIY railing, 50% faster installation time. Plant tour and training provided. Joint travel with SM support.
 
Company ID: 106799 - Click Here for Full Details
Product Lines:
Stairlifts, Auto Lifts, Vertical Platform Lifts, Elevators, Ramp Systems. 
 
Target Markets:
HOAs, Seniors, Contractors, Builders, Care Centers. 
 
Sales Opportunity:
Our company is the leading national franchise for accessibility equipment with over 50 locations throughout the US. Looking for commission only Rep to help grow business.
 
Company ID: 105908 - Click Here for Full Details
Product Lines:
Marketing Solutions.

Our Message is "We Make Marketing Work" and we Focus on Building the Workflow and Process that Drives Higher ROI for Companies Doing any sort of Advertising. 
 
Target Markets:
Amazing markets for us are Contractors, Home Goods Manufacturers and Distributors, Dental Practices, Chiropractors, Plastic Surgeons, and Service Companies such as Homebuilders, Landscapers, etc. 
 
Sales Opportunity:
- We make it EASY. You make a connection and we do the rest.
- Average sales will result in continuity income for up to 2 years! Our average program will put $300/month in your pocket and some of our larger projects will put $2,000 - $3,000 Per Month in your pocket.
- Any business looking to advertise or market is a good candidate
- Even companies already marketing can see tremendous returns from the efficiency we put in place.
 
Company ID: 106754 - Click Here for Full Details
Product Lines:
The Undisputed #1 Manufacturer of Advanced, Safe, and Dependable Heavy Duty Vehicle Lifting Systems.

Our World-Class Product Range includes Award-Winning Mobile Column Lifts and In Ground Lifts. Including Piston Lifts and Scissor Lifts, as well as 2-Post Lifts, 4-Post Lifts, Platform Lifts, and more. 
 
Target Markets:
Western Pennsylvania. Focus will be on both Private Industry and Municipal Government Agencies. The Independent Sales Representative will Pursue New Customers as well as calling on our Existing Customers to Assist them with Ordering our Products. 
 
Sales Opportunity:
We are a full service provider of heavy duty shop maintenance equipment, offering a comprehensive line of lifts and accessories since 1996. In addition to the impressive suite heavy duty lifting products we provide air compressors, exhaust systems, lube equipment, tanks, wash systems and turnkey shop installation.

Our ALI certified lift inspectors maintain a full inventory of parts and tools necessary for repairs on all types of equipment. Our sales team is comprised of industry experts with an extensive knowledge of all products. Our ALI Certified technicians offer comprehensive and outstanding customer service from small repairs to large installation projects. Overall, we offer sales, rentals, service, installation and support, all with a commitment to excellence.
 
Company ID: 106733 - Click Here for Full Details
Product Lines:
Current Services include design assistance for applications utilizing wire rope assemblies, and manufacture of these cables from small quantities to several thousand per year. 
 
Target Markets:
Market segment focus includes medical device, large truck, aircraft and aerospace, lighting and other cable suspension systems 
 
Sales Opportunity:
Commission: Commission rate for all orders 5%. There are no house accounts, or exclusions. The territory will be exclusive for the appointed agency. Reps are in other territories in the United States.
Support: Our company will provide brochures, website support, samples, training, travel with reps, application binders.
 
Company ID: 106718 - Click Here for Full Details
Product Lines:
Architectural Building Products - Columns, Mouldings, Ceiling Domes, Panels made of Polyurethane & Fiberglass. 
 
Target Markets:
General Contractors, Architects, Custom Home Builders. 
 
Sales Opportunity:
Looking for qualified reps to sell our products. We have been in business since 1997 and we are specializing in university housing construction projects. We are offering exclusive territories.
 
Company ID: 106716 - Click Here for Full Details
Product Lines:
Steel and Fiberglass door door Lites weather strip extrusions sills 
 
Target Markets:
Box stores and and mill work pehangers 
 
Sales Opportunity:
We are a company that is looking for reps cross country there are major opportunitys we manufacture fiberglass and steel door and many door component we also manufacture an extensive line of door Lites
 
Company ID: 98897 - Click Here for Full Details
Product Lines:
Our Products will Differentiate Existing Products to become Higher-End Merchandise in the Home Appliance, Housing, and much more.

Many Products are Designed and Made in Japan.
- Dampers (Rotary, Shock Absorber for Motion Control)
- Mini Size Slide Rails for Precise Movement
- Soft Close Units 
 
Target Markets:
Our targeting markets are:
1) Home Appliances (Motion & Noise Control on Lid Closure Part for Washing Machine, Dishwasher, & Oven)
2) Luxury Furniture (Soft Close Unit for Interior Door Handle & Cabinet)
3) Automobile Interior Module Manufacture (Motion Control for Arm Rest & Side Handle) 
 
Sales Opportunity:
Our company in Chicago is looking for a sales rep to sell our mechanical motion products into the North American market! We are dedicated to developing products that meet the needs of its customers in safety, durability, and operability. We provide custom designs and test models as well as carry out assessment test and simulation analysis using our proprietary programs. Our advantage is that as we have varieties of product line up. We can provide multiple products to customers at the same time. We will support our reps by presenting product samples and conducting product training for further understanding.
 
Company ID: 106672 - Click Here for Full Details
Product Lines:
Black Nitrile Gloves 6 mils Thick. 
 
Target Markets:
Automotive, Tattoo, Mechanical, Schools, Beauty Salons, etc. 
 
Sales Opportunity:
We have the most superior thick Black Nitrile Gloves on the market. Priced low enough to beat any competitor. We have tested it against all the major brands and hands down we have the best quality.
 
Company ID: 95606 - Click Here for Full Details
Product Lines:
Decorative Stone Composite Channel and Drainage Grates, Catch Basin and Sump Drain Grating, Pool and Fountain Grating, Tree Grating, Floor and Shower Drains, and Creative Design Grates. 
 
Target Markets:
With our product lines the List of Sales Targets are Endless. Architects are the first source for Spec Work. Pool Builders. 
 
Sales Opportunity:
Our company is a new and exciting source of architectural grating for interior and exterior applications. Their stone reinforced grating has been used around the world since 1990 and now is being made available in the USA. Our grating products are ideal for use in areas of high visibility and elegance. With over 16 color choices to select from, our products are perfect for accenting stone and tile building materials and compliments colored concrete and paver hardscapes.

Our products withstand the punishment that can be seen in swimming pools, fountains and showers application while contributing to aesthetic in a way that that no other material can. Our natural stone look makes it an easy choice for landscaping projects. It is tough enough to be used in roadway applications. It is versatile. It is stylish. It is rugged.
 
Company ID: 106208 - Click Here for Full Details
Product Lines:
Handmade Furniture made from Solid Rosewood by Master Craftsmen. 
 
Target Markets:
High-End Retailers and Interior Designers. 
 
Sales Opportunity:
As a designer/retailer buyers are always looking for that perfect, original furniture piece for customers. It is not easy to find special items in this day of cookie cutter products.

We have a solution for you. Rosewood is a rare and highly sought after material. With our added hand craftsmanship and beautiful finishes, we create beautiful heirloom pieces. You can sell from our current styles or our company can create custom pieces which will open new avenues for your business. You design it or let us create something special. This will definitely make you stand out from your competition. All this and a great commission structure.
 
Company ID: 106577 - Click Here for Full Details
Product Lines:
Patented, USA, Zinc, 1st Rounded Steel Edge Connector, Lock Nut, Pull Bushing, Ground Bushing with 3 Holes to Choose from for Lug Mounting.

Plastic Insulator is Installed after the Pull, has a Slit in the Insulator. Universal Threads Fit all Connector Brands. 4 Versions Available 1/2 - 4 Inch. 
 
Target Markets:
Electrical Supply Houses. Must sell electrical connectors to electrical supply houses, visit electrical contractors on a normal basis. 
 
Sales Opportunity:
Slicknut is a new product, it saves time, labor, and yes no other connector is a fair comparison to this product. Electricians in Chicago love this product. Customers say that they save $4-5K in labor and no more damage to there wire insulation. Our company is selling this in 8 supply houses in Illinois and we are ready to launch this product worldwide.

We are offering a 8% commission from total sales. Also developing additional electrical products. It is available in stainless steel and we are developing a socket set from 1/2 to 4 inch that will be available 2017. Three other versions available: pull bushing, lockut, threadless ground bushing, Pull bushing fits over EMT, heavy wall, and PVC with no connector needed below. And last this threadless pull bushing.
 
Company ID: 106645 - Click Here for Full Details
Product Lines:
LED Lighting Products to include: Linear LEDs for Lighting Signage, Architectural Lighting, Gaming, Canopy Edge Lighting, Display Case Lighting, Museum Displays.

In Addition to Linear Lighting, our company Offers LED Indicator Type Lighting for Instrumentation Applications. 
 
Target Markets:
Architectural and Lighting Designers, Sign Manufacturers, Canopy Manufacturers, Museums, Instrumentation and Gauge Makers, Automotive and Marine Instrument, and Equipment Makers. Products include Standards and Custom that Range from Small Specialty Needs to High Volume Production Requirements. 
 
Sales Opportunity:
Our company has been in business for over 44 years serving the Automotive, Aerospace, Gaming, Signage, and Architectural industries to mention a few. We are in search of Rep organizations in No. Calif, Minnesota, Ohio, NY, FL, NC, and WA. We place a lot of value on being a lighting solutions provider.

This means fast response to inquiries, quotes, samples, and technical support. The diversity of our lighting products allows us to serve a wide range of general and niche markets. Our Reps are well supported with training, functional sales kits, literature, leads, and a negotiable commission structure.
 
Company ID: 106644 - Click Here for Full Details
Product Lines:
A Full Line of Premium Quality Sinks for the Kitchen and Bath Available in Several Materials. 
 
Target Markets:
Wholesale and Retail Channels. 
 
Sales Opportunity:
Brand name, established manufacturer of premium quality sinks for the kitchen and bath is seeking professional independent representation in key markets in the continental United States. Not a pioneer line. Existing, established customer base with significant growth opportunities.

Established and available through all major plumbing supply houses and kitchen and bath showrooms. Popular specification line for hospitality and multi-unit residential projects. Generous support from corporate to help you succeed. Significant opportunities for those who know and practice the ABC's of repping. Relationships with the wholesale side and retail/showroom side are important. Territories available for immediate placement.
 
Company ID: 106641 - Click Here for Full Details
Product Lines:
We have no product lines. 
 
Target Markets:
Hospitals, Large Manufacturing Companies Wanting to Dispose of their Old Machines and Equipment, Schools, and Any Facilities wanting to Upgrade their Electronic Instruments, that cannot be placed in any landfill. 
 
Sales Opportunity:
Our company is a specialist in electronics recycling. IT Asset disposition, medical and lab-asset disposition, data destruction services. Our goal is properly diverting as many tons of electronics from the landfill as possible by offering convenient solutions to the ongoing issues of identity theft and environmental liability.

We are registered with the EPA, are Level 4 Certified by the Missouri Deptpartment of Natural Resources, and hold National R2/RIOS Certification. Our main processing facility is a 53,000 sq. ft. warehouse located in Park Hills, MO. We also have locations in Kansas City, MO: a 54,000 sq. ft. IT and refurb facility in Imperial, MO.
 
Company ID: 106640 - Click Here for Full Details
Product Lines:
Dura-Scrim 6 mil Fire Retardant Plastic
Interior Protection
Dust & Debris Containment
Temporary Plastic Barriers 
 
Target Markets:
Roofers. 
 
Sales Opportunity:
This opportunity is good to sell because its very unique. It protects the underside from falling dust and debris, so that the work below, simply continues, no lost time or money. The second is when work is being performed on the same level, near where work is happening, again we protect or isolate the renovation work and dust from the facility work, so that all stays clean and clear of dust and debris.
 
Company ID: 102152 - Click Here for Full Details
Product Lines:
Insulated Covers for Attic Pull Down Ladders, Scuttle Holes, and Whole House Fan Covers and New Product Line - Airtight Crawl Space Covers. 
 
Target Markets:
HVAC Box Stores, Insulation Stores & wholesale, HVAC Contractors, Insulation Contractors, Building Supply, Builders. Especially green energy efficient builders. The product is The only product that complies with ICC r402.2.4. So it’s a slam dunk with efficiency builders. 
 
Sales Opportunity:
Easiest place to see this opportunity is by going online once we contact you. I am signing reps now. The line is gaining traction at stores like Ferguson, United Refrigeration, etc.

We now have IDI distribution as a wholesale customer. I have signed all of these myself with virtually no manufaturers rep experience. Looking for guys who will make the calls and drive to the stores. Nothing falls into your lap here except an excellent product that meets a code that will be enforced hardcore soon.
 
Company ID: 106585 - Click Here for Full Details
Product Lines:
LED Lighting
- LED Tubes 2'-8', 3K-6K Color
- Wall Packs
- High Bay Lighting
- Flat Panel Fixtures
- Down-Lighting 
 
Target Markets:
Lighting Distributors and High Volume Re-sellers. We Do Not Sell to Contractors. 
 
Sales Opportunity:
LED is the next wave of energy efficiency to hit the market. Price points have come down to a point where there is serious market interest and utility companies are offering rebates to help make sales easier. We have a competitive commission structure, including overages. Sky's the limit!
 
Company ID: 106530 - Click Here for Full Details
Product Lines:
Our services (by importance):
- Injection Molding
- Full Product Design
- Circuit Board (PCB) Design & Assembly
- Firmware Programming
- Prototyping
• 3D Printing
• CNC
- Wholesale Distribution
- Industrial Design
- Mechanical Engineering
- Packaging
- Order Fulfillment
- Stencil 
 
Target Markets:
We Serve All Industries but mostly Consumer Electronics, Aerospace, Medical, Communications, & Entertainment from the US, Europe, Oceania, & Middle East. Our Median Order Size is $13K, with Single Orders being up to $200K. Contracts with Customers that Combine Different Services go Beyond $200K. 
 
Sales Opportunity:
We are the only company in Florida's Space Coast offering a complete service line that takes product concepts to mass production and into retail stores. We have every service to make an idea become a reality, from product design and engineering, to manufacturing and distribution.

Our company offerings range from product and electronics design to prototyping and manufacturing. We are experts in CAD modeling and translate this expertise to the manufacturing side, always assuring DFM (Design to Manufacturability), especially for plastics that require injection mold tooling and high volume manufacturing.

We use our Florida facility to assemble PCB (printed circuit boards), both surface mount and through-hole, of up to 5,000 units. Orders of more than 5,000 pieces are assembled in our China facility in Shenzhen, along with any plastics manufacturing orders. We are currently in the process of getting ISO certification for all our injection molding and circuit board assembly services in our China facility.
 
Company ID: 106505 - Click Here for Full Details
Product Lines:
Full Solar Panel Kits.

Everything you would Need to Install a solar Panel Kit onto a New or Exisiting Home.

We have 3 Standard Kit Sizes:
5kw Kit - Suitable for Small or Very Efficient Homes
7.5kw Kit - Suitable for Standard Sized Homes
10kw Kit - Suitable for Larger or Inefficient Homes 
 
Target Markets:
New Home Builders
Hardware Stores 
 
Sales Opportunity:
Solar panel kits benefit everyone involved. They increase the value of a home, reduce electricity bills, and help save the planet! Not to mention the sales reps get $1,250 for each 5kw kit sold, $1,500 for every 7.5kw kit sold, and $2,000 for every 10kw kit sold! These practically sell themselves.

The value in these kits, from a new home builder perspective is they can make thousands of dollars more profit on the sale of any home by helping their customers save money and save the planet! Hardware stores can opt into our drop shipping program and not worry about the large expense of buying multiple kits upfront. They can get a large discount if they do order the kits to store in their shops.
 
Company ID: 106571 - Click Here for Full Details
Product Lines:
Engineering & Design Services in the Instrument & Controls Discipline.

40+ years Experience and Expert in Pneumatic Thru Modern Distributive HMI Controls. Specialize in Updating Old Obsolete Pneumatic Controls to Modern "Form, Fit, and Function" Devices. 
 
Target Markets:
Nuclear Power and Other Industries Replacing Obsolete Moore Products Company Instrumentation. Any Industry that Requires Process Control Documentation Developed or Updated 
 
Sales Opportunity:
If you have clients that are in need of updating old obsolete process controls or systems, especially pneumatic controls, I understand and create SAMA and P&ID drawings. I am life member of the ISA (International Society for Automation). I am retired principle I&C Engineer for Parsons Engineering and held positions as Lead I&C Engineer for DuPont, and Weyerhauser among others.
 
Company ID: 92239 - Click Here for Full Details
Product Lines:
Commercial Lighting Products: Industrial, Construction, Outdoor Lighting Equipment. 
 
Target Markets:
Construction Companies, Industrial Electrical Product Re-Sellers/Dealers, Government (City, State, Federal), Military. 
 
Sales Opportunity:
Our lighting products are a spin-off product from military specification. The quality, durability, and applications are comparable to military use. Our lighting products will be superior in quality and cost when compared to other industrial products.
 
Company ID: 104444 - Click Here for Full Details
Product Lines:
A Complete program of Fiberglass Gutter & Accessories. 
 
Target Markets:
Building Material Suppliers, Lumber Yards, Distributing Contractors, Architects. 
 
Sales Opportunity:
A Revolution in Rain Gutter. Fiberglass Gutters have been in existence since the late 1990's. It wasn't until recently that we were able to conceive an affordable version of the product. Fiberglass Gutters will not rot, crack, peel or leak. It is paintable, easy to install and looks just like wood.
 
Company ID: 106518 - Click Here for Full Details
Product Lines:
Non-Metallic Enclosures, Terminals, Connectors, Switches.

Our Enclosures are All NEMA4X. Enclosures are UL Listed (and cUL).
Our Terminals can be Used with Aluminum and Copper at the Same Time. Terminals are UL Recognized.
Our Switch Range is from 40A to 100A. They are UL508 Listed (and cUL). 
 
Target Markets:
Our target markets are Distribution and OEMs. Usually we Sell to OEMs Through Distribution. 
 
Sales Opportunity:
This is a great opportunity to come to market with new brand and based on the experience in USA we are able to fulfill customer needs what comes to flexibility and efficiency. Especially in Non-metallic enclosures we can offer good alternatives for metallic enclosures and also replacements for the current non-metallic lines.

Our manufacturing is in Europe but we have stock in USA. Company has 1,700 people worldwide. Our company also manufactures other electrical equipment like LED lighting and Ventilation units for other markets. Company is really stable and profitable and our production improves continuously to keep us competitive.

Our biggest advantage compared to competition is fast deliveries on customized products and wide knowledge of electrical products. That helps our engineers to support customers in their decisions. We support our Reps. with training and joined customer visits. Also we give engineering and sales support when needed. Our goal is to make our line very profitable for every Representative. Our commission level is 12% of all sales done by the Representative.
 
Company ID: 61384 - Click Here for Full Details
Product Lines:
Opportunity to add the Top Selling Brands of Skincare, Lotions and Healing Ointments to your portfolio. Our products are instantly recognized and always in the Top 3 Brands within each category. 
 
Target Markets:
We are seeking highly qualified, well connected reps that can extend our reach to the Automotive Retail, Wholesale and Industrial Retail Wholesale Channels at the headquarter level. 
 
Sales Opportunity:
This is a very exciting opportunity to work with the leading manufacturer of skincare, lotions and healing ointments. You will have the support of a multi-million dollar media campaign, great selling material, samples, tailored displays and check-out products.
 
Company ID: 106512 - Click Here for Full Details
Product Lines:
Hotel Furniture
Casegoods
Lamps
Shower Doors
Bathroom Hardware
Flooring
LED Lighting
Mirrors
Artwork 
 
Target Markets:
Hotels
Motels
Seniors Living Facilities
Student Residences 
 
Sales Opportunity:
Our company offers a comprehensive collection of Furniture, Fixtures & Equipment products for the Hospitality industry. We are an industry leader in Western Canada, and we are looking to expand our market reach with qualified Hospitality professionals.

Our Canadian Hotel clients include Holiday Inn Express, Comfort Inn, Super 8, Choice Hotels, Best Western, Hyatt, Ramada, Days Inn and many more. We have 35 years of experience servicing the biggest brands in the Hotel industry. We are ready to approach the United States market for the first time and we are looking forward to hearing how you can help us succeed!
 
Company ID: 106477 - Click Here for Full Details
Product Lines:
Mosaic Tile.

This Includes but is not limited to Glass, Stone, Ceramic, Metal, and Wood Mosaic Tile. Our Niche is Higher End Mosaics, All Designed by our Owner and Creative Director. 
 
Target Markets:
Our Primary Market is Regional to Local Distributors in the Building Material, Flooring, Design Boutiques, etc. 
 
Sales Opportunity:
This gives you the opportunity to work with one of the most known and talented designers in mosaics. There is a tremendous opportunity of growth and sales working within our company. We think of ourselves as the trend setters in mosaic tile. Although our company has only been around for 6 years, we have brought the market many successful designs. As an independent sales rep you have a tremendous opportunity to work at your own pace using your knowledge and abilities to become very profitable and successful.
 
Company ID: 106476 - Click Here for Full Details
Product Lines:
Our Product, a Two-Way Keyless Entry Child Safety device is a Revolutionary, Patent Pending Design, specifically for Child Safety.

You can Use this Device to Safeguard Small Children by Restricting their Access to Virtually any Doorway in your Home, both Interior and Exterior. 
 
Target Markets:
Our Products Sells thru Amazon and our Website. These Products are Interesting to Big Retail Store, Wholesale Stores, Distributors, Contractors, Door and Window System Manufacturers, Children Stores, etc. 
 
Sales Opportunity:
We are looking for Rep Companies that sell to door and windows manufacturers, retail and wholesale market, contractors, child accessory market. we have spent last couple years developing various designed child safety locks that will be easy to use and easy to install. We have worked with the best engineers and currently developing new product - magnetic lock. There is no other child safety lock company that provides this type of locks great design plus easy to use and install. We will provide sample cases, description, all necessary information, and other support needed.
 
Company ID: 106460 - Click Here for Full Details
Product Lines:
Aluminium Extrusions, Aluminium Extruded Solar Panel in PV Module, Aluminium Sections & Different Profile. 
 
Target Markets:
Individual/Organisation. Have some experience related to this product. 
 
Sales Opportunity:
We are one of the leading Manufacturer & Export house for Aluminium Extrusions. We are doing regular exports but we need to enhance our export since we are in the verge of establishing another factory in Bengal, India. People who have experience to deal with quality material not from road side may approach for our Reps. We will discuss & if require we will have meeting.
 
Company ID: 106450 - Click Here for Full Details
Product Lines:
Reveolutionary Patented Polymer Step Flashing for Shingle Roofs.

ICC Registered, UV Inhibited, Non-Corrosive, Recyclable to Replace Finished Metal Step Flashing. 
 
Target Markets:
Roofing Contractors, Roofing Supply Distributors & Asphalt Shingle Manufacturers. 
 
Sales Opportunity:
Do you have relationships in the roofing industry? If so, this product is a no-brainer! Ground floor opportunity to represent patented product that will replace metal step flashing as the new standard of step flashing in the roofing industry! Repeat Sales! Special commission rates for new accounts! Residual sales commissions!

Step flashing is installed at the intersection of the roof pitch and a vertical rise to prevent leaks. Approximately 9M bundles of metal step flashing sold annually. Our polymer step flashing has been ICC tested and has a 50 year warranty, is non-corrosive (use any fastener), UV inhibitive, much easier to work with (no tin snips), and is recyclable. Roofing contractors love the product!

Sold in bundles of 50 8" X 8" shingles for the same price or less than metal. Due to weight metal step flashing is cost prohibitive to ship which has created a fractured, local marketplace. This product is 1/4 of the weight of metal - economical to ship anywhere. Land national distribution!
 
Company ID: 105129 - Click Here for Full Details
Product Lines:
Software for the Service/Fixed Operations Department in the Automotive Industry.

Our Internet Based Software (Cloud Based) Allows Service Departments to Update their Customers on the Status of the Vehicle being Repaired. 
 
Target Markets:
Our Target Market are New Franchise Auto Dealers (any type) Pre-Owned Auto Dealers, Power Sport Dealers, RV and Marine Dealers, and Heavy Equipment Dealerships. We have over 20 current clients. This is a residual income business, get paid every month. 
 
Sales Opportunity:
Join our Team! We are looking for Sales Professionals – We will help Train You! We are growing and in need of experienced Sales Reps.

The automotive Service industry is Back in a Big Way! Sales are up all over the country. 40% of gross profit comes from the Service Department.

Who are we Looking for:
Previous automotive experience.
Related business to business background is helpful for this position.
High-energy, positive, outgoing individuals.
Strong verbal and presentations skills.
Service or Parts background helpful.
Currently selling to Dealers and looking for a change.
Current or previous factory rep.

A Few Perks for You:
Results Only Work Environment (ROWE) - We celebrate results, not hours worked. You're empowered to manage your schedule in order to integrate work and life so that neither gets neglected.
Flexible Time Away From Work - No more counting your vacation days, take what you need, as long as your work gets done.
Unlimited earning potential – Very Strong Commission + Bonus every month + % of recurring revenue each month.
 
Company ID: 106444 - Click Here for Full Details
Product Lines:
- LED Lighting Products (Specifically Desk Lamps and Task Lighting)
- Microfiber Cleaning Products 
 
Target Markets:
Retailers and Wholesalers. 
 
Sales Opportunity:
Catalog of over 300 SKUs and expanding. Cleaning line is a recognized brand. Significant accounts are open to be tackled with tons of sales potential. We have domestic warehouse, EDI compliant and have a nationwide fleet of people to help with events (if needed to support customers). eCommerce is generally off limits.
 
Company ID: 58510 - Click Here for Full Details
Product Lines:
Food and Beverage Processing Equipment, to give Extended Shelf Life, and Disinfection of Fluids.
Surface and Air Disinfection for Healthcare Establishments
UV Closed Vessel Equipment
UV Surface Treatment
Dairy Treatment
Microwave Biomass Dryers
Industrial Lighting
Greenhouse Propagation 
 
Target Markets:
Industries, such as Healthcare, Industrial, Water, Food and Beverage, Aquaculture and Agriculture. The Potential Markets are Worldwide our target markets are in USA, Europe, and the Middle East. Our products Cover all Aspects of Fluid, Air, and Surface Disinfection. 
 
Sales Opportunity:
We are a UK company with a US subsidiary that was formed in 2010 and we are looking to expand on our rep base by employing seasoned companies and individuals to promote our products. All products are well supported with good literature on each product, newsletters, eNewsletter, everything is downloadable from our websites.

Our competitive edge is that the processes are all RF/Microwave powered or enhanced. We can help reduce carbon footprints and all our processes help conserve energy or offer long component life. We have an office in Illinois, USA, our Head Office is in the UK, and an office opening shortly in Asia.

Our markets can be broken down into Healthcare, Food processing and water treatment. All our products use our unique Microwave powered plasma lamps which gives us huge advantages over competitor systems.
 
Company ID: 106382 - Click Here for Full Details
Product Lines:
Laser Cutting of Steel, Aluminum, and Stainless
CNC Machining 3 Axis Mill and Lathe
Fabrication and Welding Including Aluminum Welding.
Powder Coating. Not Sold as Stand Alone Service.
CNC Punching 
 
Target Markets:
We typically sell to niche manufacturers with sales in the 10 million to 100 million range. The ideal jobs use the bulk of our equipment. Robotics firms, agricultural equipment manufacturers, tech companies, firms specializing in long term health care products are all ideal 
 
Sales Opportunity:
We have the capitol equipment in place to absorb a two million dollar sales increase. Over ninety percent of our client are on the tread mill where they repeat the same order every 1 to 6 months. This will generate residual revenue with minimal effort. We target clients who can buy at least 6 figures a year in our services.
 
Company ID: 106378 - Click Here for Full Details
Product Lines:
- Plastic Injection Mold
- Plastic Blow Mold
- Die Casting Mold
- For Over Mold, 2 Shot Mold, Multi-Cavity Mold, Unscrew Mold, Insert Mold 
 
Target Markets:
- Mold Manufacturers
- Parts Manufacturers of Medical Device, Automotive Parts, Home appliance, Electronic Instruments, and so on
- All Companies who Need Plastic Mold and Die Casting Mold 
 
Sales Opportunity:
For our machined parts, we use a series of high precision mold processing machine that are mainly from Japan and Europe. Such as Sodick CNC, Fanuc CNC, Charmille Mirror, etc. For our proccess parts, we control production volume, we produce about 350 sets mold per year.Our engineers at our factory have a rich experience in the mold field. We have the perfect company system, it always lets us win the customer's heart.
 
Company ID: 106374 - Click Here for Full Details
Product Lines:
Steel Garage Cabinets, Steel Tool Box, and Steel Tool Chests. 
 
Target Markets:
Costco, Homedepot, Lowes, ACE, Grainger, True Value. 
 
Sales Opportunity:
Become the sales leader for a rising steel premium garage cabinet & tool box company.We have been designing & manufacturing top quality products since 2005. We used to do OEM for distributors, who sold steel garage cabinets, steel tool boxes, and tool chests to big channels like Costco, Home Depot, Lowes, Canadian Tire Co, etc.

We have the fame of good quality, reasonable price, and on-time delivery. We are now ready to launch our own brand of premium garage cabinets & tool box products in the US & Canadian retail and reseller channels. If you have what it takes to bring our products to the right strategic channel partners, let’s build the business together! The commission is based on sales.
 
Company ID: 106372 - Click Here for Full Details
Product Lines:
Full Line of LED Bulbs for both Residential and Industrial Market.

LED Integrated Fixtures
LED Tubes
Branded, UL/cUL, ETL, DLC and Energy Star Certified Products. 
 
Target Markets:
We need reps for Retail and Hardware Stores, wherever they would Carry Bulbs. We are already present in Home Hardware, Rona, BMR, and Castle. 
 
Sales Opportunity:
We offer tremendous value since we have no intermediaries as a Chinese Manufacturer, but we also have a sales office in Montreal, Canada. Therefore, you get low price with local after sales services and support! Transactions could be made via our Canadian office or directly from our Chinese company.

We are known in Quebec and we are looking for independent sales reps to cover US territory, as well as other Canadian provinces. We prioritize sales with existing lines in electricity with solid relationship with hardware stores. You will see that we are very aggressive in price and in quality (5 years manufacturer warranty).
 
Company ID: 106347 - Click Here for Full Details
Product Lines:
Our product is the State-of-the-Art Way to Solve Wobble Problems.

Our Patented Leveler is Easy to Install and Proven to Provide Stability. It Outperforms the Lower Quality Shims with our Unique Interlocking System. A Single Platform could to Used Independently to Accommodate a Minimum Space. 
 
Target Markets:
- Restaurant Distributors
- Hospitals
- Cruise Ships
- Hotels
- Schools
- Office Supplies
- Patio and Garden Furniture Suppliers
- Government Maintenance
- Hardware Suppliers 
 
Sales Opportunity:
Our company was established in 2014. Designed, developed and manufactures the unique stabilizing device, in the USA. The initial launch unit size is adapted to service a 1" to 1 1/2" in diameter furniture foot, for the service industry, office furniture and academic institutions or anywhere a table wobbles.

The next generations will provide a wider range of application, with 2 additional sizes accommodating a wider diameter for larger furniture and equipment. We're going to expand in the construction and industrial size for equipment in the near future. Our company is looking for individuals that are interested in adding this line to there existing portfolio, with the opportunity to expand with the company as we grow.

The company is willing to consider exclusive representation of its line to top producers in there respective area or region. The commission is tiered at a competitive rate, from 8 to 15%.
 
Company ID: 106334 - Click Here for Full Details
Product Lines:
Doors and Locks. 
 
Target Markets:
$5,000,000 /year 
 
Sales Opportunity:
Our company is one of Southern California's primary doors and lucks distributors. For over 20 years, we have provided our customers with high-quality decorative doors. We strive to offer our clients with quality products at competitive prices by focusing on design and quality, combining the best of overseas production with American assembly, finish, and custom production.

We are proud to offer custom-designed door and glass products, as well as a large selection of standard models. We have African Mahogany wood door, knotty alder solid wood doors, copper doors, wrought iron doors, fiberglass doors, and locks.

Sizes:
Standard door widths in-stock are 30", 32", 36", and 42".
Standard door heights in-stock are 80" and 96".
All custom sizes are available by special order.
 
Company ID: 90616 - Click Here for Full Details
Product Lines:
As Custom Compression Molders of Glass Fiber, Polyester, Resonated Fiber, and Foam.

Our company is a Full Service Supplier of Thermal and Acoustical Insulation Parts to the Automotive, Architectural, & Office Furniture Markets. 
 
Target Markets:
We are well Suited to Serve the Specific Needs of OEMs, Architects, Designers, and Engineers. 
 
Sales Opportunity:
Our company is looking for experienced independent sales representation to service our customers on a commissioned basis. Please submit a sales inquiry to us for any additional details or questions you may have.
 
Company ID: 106320 - Click Here for Full Details
Product Lines:
Basketball Goals, Bleachers, Player Benches, Picnic Tables, Lacrosse Goals, Training Equipment, Score Table, Ball Carts. 
 
Target Markets:
Schools, Churches, Businesses, Residential. 
 
Sales Opportunity:
Great margins! Local - family owned and operated company! Work directly with our wonderful customer service team to enhance your potential income. Drop Ship available. PO's accepted.
 
Company ID: 106191 - Click Here for Full Details
Product Lines:
LED Lighting for All Lighting Needs.

We do Indoor and Outdoor LED Lighting. We Specialize in New Construction, Re-Models, and Retrofit LED Lighting. We have LED Lighting Available in Tubes for Troffers, Bulbs for High Hats, Track Lighting, Outdoor Security Lighting, Outdoor Landscape Lighting. 
 
Target Markets:
Anyone Using Lights that is Looking to be Green, Energy Efficient, Reduces Electric Usage, and Cost. We can do New Construction, Re-Models and Retrofit Applications. Hotel/Motels, Supermarkets, C- Stores, Retailers, Parking Garages, College and Universities, Contractors, Electricians, and Distribution. 
 
Sales Opportunity:
Our company has been in business over 10 years here in South Florida. We are a fully integrated company and offer our reps and clients the best LED lighting the industry has to offer. We have the solutions that will save energy, reduce maintenance and lower operating costs. We offer all our reps Full Support, Design and Engineering, Project Financing, Single Source, Product development, and Project Management. Our reps can sell small businesses to large fortune 500 companies. We offer a 6% commission structure and offer samples and all the marketing material needed to be successful in selling LED Source.
 
Company ID: 105891 - Click Here for Full Details
Product Lines:
New Installation Aid for the Building Industry.

Patented Design that Combines the Simplicity of Composite Shims with the Functionality of Zip/Cable Ties. There are many Areas where Installers will be Able to Realize Lower Costs to Install Windows, Doors, & Cabinets. 
 
Target Markets:
The Market: Window, Door and Cabinet Manufacturers. Retail Home Centers/Lumberyards. Tract Builders, Framers, Installation Sub-Contractors. Any Applications Currently Using Opposing Wedges/Shims to Fill a Cavity is a Potential Market such as Plumbing, Masonry, and HVAC Companies have all found a use. 
 
Sales Opportunity:
Ours is a "start-up company" that is looking to develop long term relationships with some professional sales representatives. If you have experience in the installation of building products, the advantages of the functionality should be an easy sell. The challenges have been identified and we look forward to sharing them to develop strategies to proactively answer any questions or concerns from the market.

The owner is not a salesman. More importantly he knows it. He is currently working on the development of additional products for the building industry. Specifically, the next product will be a sill pan that will utilize the patent to allow a unit to be leveled inside the sill.

To sum it up. I am an inventor, not a presenter. I would love to concentrate on the challenges associated with the operations side of the business. I am open to suggestions related to the challenges of introducing a new product to folks that sometimes are reluctant to change. Specifically, I believe that it is going to take some sort of tiered commission structure to keep everyone happy.

I am also totally open to change. I welcome suggestions for product enhancements and appreciate constructive criticism if it helps improve the product and/or process.
 
Company ID: 106278 - Click Here for Full Details
Product Lines:
We are a Professional and Intensified Supplier for Equipment and Service in the Whole Industry Chain of Nuclear-Grade Pumps and Major Non-Nuclear Class Pumps as well as Equipment of Nuclear Power Re-Processing, Technology from Germany and Manufacturing Based in China. 
 
Target Markets:
Our target market is Nuclear Power, Paper, Oil, Petrochemical, Refinery, Processing, Civil Engineering, and other Heavy Industry. 
 
Sales Opportunity:
We are planning to expand the North America market and we can meet all kinds of requirements from our customers. German technology and China manufacturing means more competitive in the market. We provide training in Shanghai and a good commission plan for developing of the market.
 
Company ID: 106277 - Click Here for Full Details
Product Lines:
Hardware and Home Improvement Products into Industrial Distributors and Contractor Supply Retail Channels.

Specific Examples include: Paint Brushes/Supplies, Hand Tools, and Construction Gloves. 
 
Target Markets:
Industrial Distributors and Contractor Supply Retail Channels. 
 
Sales Opportunity:
Ours is a manufacturer representative sales organization that partners with manufacturers in the Industrial/Contractor Supply markets to sell high quality hardware and home improvement products into the leading industrial distributors and contractor supply retail channels. Develop existing distributors and end users as well as prospecting for new business.

Maintain relationships with distributors and end users by providing enthusiastic service. Sell product features and benefits plus build sales through guidance and by recommending new opportunities. He/she will be working with distributors and their staff to build sales with their customers. Selected candidate will be fully trained by our company on the various product lines represented. Required to work trade shows which include some nights and weekends. 90% field work.

Skills/Qualifications:
We are looking for applicants with a min of 2-4 years experience preferably in the Industrial Sales/Contractor Supply Sales (selling tools).
Sales territory will consist of PA, Southern NJ, MD, DE, and Northern VA.
Reliable transportation is a must. We provide paid travel expense and a car allowance.
Enthusiastic Sales Person, Emphasizing Excellence, Meeting Sales Goals, Creative, Sales Planning, Independence, Motivation for Sales, Computer Skills (MS Office).
Very competitive base salary plus commissions.

Our benefits package include: Health, Dental, 401(k), Paid Vacation, and Holidays.
 
Company ID: 106273 - Click Here for Full Details
Product Lines:
This is an R.F. Electronic Valve Installed at the Main Water Entrance that Automatically Shuts Off when the Control Panel Receives an Overflow Signal from its Wireless Sensors.

Effective in Preventing Water Overflow Caused by the Hot Water Tanks, Bathtubs, Sinks, Toilets, Dishwashers, Washing Machines. 
 
Target Markets:
Our Manufacturers Reps will Promote and/or act as a Master Agent Distributor for our product to the Plumbing Distributors and Plumbing Operating Companies and Plumbers. Ingeneering Firms, Architects. 
 
Sales Opportunity:
According to Statista:
Statista./topics/1618/residential housing in the US - Number of residential units in the USA: 133.27 million.

Possible benefits for Master Agent:
We estimate that 10% of Residential units. Are very likely to install our system 13,327,000 million units. Total estimated revenue at only 10% market share, for 10% commission on sales to distributors $405,807,150.00.

The Insurance companies in North America suffered the lagest ever claims in water damage in 2013 - 2014 The market is now just starting to react to increased premiums and deductibles. Condo coporations, Commercial Condo owners, home owners are now being advised of higher premiums and deductible. Water Damage riders are cancelled completely leaving owners without insurance.The solution is our main water shut off valve System with wireless sensors.

Why would you monitor a problem like a water leak if you don't fix it? Well, this is what most major alarm monitoring systems offer you. They will monitor if there is water on your floor and advise you that you have leaked filling your home with water but will not stop it. So again why pay to monitor a problem if you don't fix it! Our company monitors a fixes it and then tells you that it has! It also provides you with an Insurance premium reduction that will allow recovery of cost.
 
Company ID: 106270 - Click Here for Full Details
Product Lines:
Decorative Textured Paints
Decorative Textured Plaster
Glass Crystal for Ceiling
Glass Beads for Ceilings
Antibacterial Paint
Roofing Systems 
 
Target Markets:
Roofing targets are the Building Supply Distributors and/or Roofing Supply Companies.
Decorative Products - Independent Benjamin Moore Stores.
Antibacterial Paint - Hospitals, Nursing Homes, Medical, and Food Companies 
 
Sales Opportunity:
Best products
Best warranties
Best programs
and loads of money to make
Support
Service
Events
 
Company ID: 106271 - Click Here for Full Details
Product Lines:
Lenovo, HP, Toshiba, Dell, Cisco, Microsoft, HiSense, Sharp, Samsung, Harmon Kardon, JVC, JBL, Signamax, PSI Data Cables, Platinum Tools. 
 
Target Markets:
Small and Mid-Sized Businesses in Canada. We Target all Verticals and Industries. Our Focus is on IT Hardware, Services for Business and Retail Channels, Specialized Tools and Hardware for Electrical, Communications, and Networking Contractors. 
 
Sales Opportunity:
Our organization is a privately held Canadian business that has been in existence since 1989. Our focus has been on providing outstanding customer service and experiences, offering leading technology products that meet the customers needs and providing outstanding value.
 
Company ID: 106268 - Click Here for Full Details
Product Lines:
Building Products. 
 
Target Markets:
Contractors, Dealers, Distributors, Architects, Interior Designers, Real Estate Developers. 
 
Sales Opportunity:
A multi-rep and State Certified general contractor with expertise in building products is currently ready to launch their new product offering to the Florida marketplace. Our current product can increase client revenue. We are now seeking sales reps to sell our product across the state of Florida (1 rep per city).

We want to offer our customers innovative products and solutions and make sure our customers are 100% satisfied with the value we bring to them. Our sales reps can work from home, make their own hours, and have unlimited earning potential. This is a commission-only position but as new products are brought online and installation increases we will be bringing on managers and marketing, so future career potential is a plus.

Some qualities we look for in our talent are: ethical, honest, prompt, return phone calls, great time management, reliable, hard working, professional, career driven, well spoken, ability to deal with all types of clients from trades to senior level executives, and computer skills (web design and marketing a plus).
 
Company ID: 106260 - Click Here for Full Details
Product Lines:
Extensive Range of Woodworking and Masonry Cutting Products. 
 
Target Markets:
You will be Selling to Masonry Supply and Industrial Channel Outlets that Service the Restoration Contractor. Other opportunities with our woodworking line available as well that can be sold at similar distribution along with many other woodworking outlets. 
 
Sales Opportunity:
Ours is an Australian based public company with operating subsidiaries in the US and Europe. We have an enviable track record of introducing new products with innovative technology to the power tool industry. We have been successful in the development, manufacturing and distribution of our products for over twenty-five years.

Substantial companywide growth over the past several years with untapped potential for the right rep. Any and all resources needed to be successful will be provided. Very little competition and unmatched innovation in both the masonry and woodworking spaces. Commission up for discussion for the right opportunity.
 
Company ID: 106251 - Click Here for Full Details
Product Lines:
Commercial Furniture Seating. 
 
Target Markets:
4 and 5 Star Resort and Hotels, Community Halls, Churches. 
 
Sales Opportunity:
Our company is an Australian owned and operated company with a focus on export market opportunities. We offer a wide range of high quality Commercial Grade furniture to all levels of the market in the key sectors of Hospitality, Healthcare, Office, Education and Public spaces. We have extensive furniture industry connections in Asia and looking to increase export sales. Commission and Profit shares opportunities, it would suit someone currently calling on hotels/resorts or experienced in commercial furniture.
 
Company ID: 106224 - Click Here for Full Details
Product Lines:
Certified Revenue Grade Interval Sub-Meters for Energy Usage of All Forms, behind the mains.

Meters that Track Usage and all Power Factor Status in Real Time and Export the Aggregated Data to Upstream Back-End Systems, BAS, BIM. 
 
Target Markets:
Contractors, Engineering Firms, E.P.C.'s, Systems Integrators, Distributors, Commercial, Industrial, Mixed-Use, Multi-Use Residential/Retail Opportunities, and Customer Focused Utilities' Professional Services Teams in their New Revenue Opportunities Evolving Behind the Mains. 
 
Sales Opportunity:
Growth and acceptance of certified data indicative of real time usage in Commercial/Industrial accounts is growing in pace with Green Energy initiatives. LEED, Energy Star, Green Button, Portfolio Manager, and other Certification awards for energy conservancy are driven by detailed data submissions reflecting efficient systems replacement. Tax Rebates, Usage Rebates, and other Government/Utility sponsored Cost recovery mechanisms lower the overall Costs, and enable less than 12 month ROI in most cases.

Our company builds these solutions for all Verticals and Sectors daily throughout North America. Join our growing team of Regional and State specific rep organizations today and catch this growing wave of change in the energy world. Measure-Understand-Conserve.
 
Company ID: 106220 - Click Here for Full Details
Product Lines:
New Exterior Siding Product that are Used in High-End Custom Homes. 
 
Target Markets:
High-End Architects in the Seattle area who Design High-End Custom Homes. 
 
Sales Opportunity:
Need a high energy sales rep who can leverage existing relationships with architects and can clearly articulate the value of the product. Our goal is to get architects to spec the product in their future projects.
 
Company ID: 106218 - Click Here for Full Details
Product Lines:
The Best the Industry has to Offer in Precision Bolting.

Our Company has been the Worldwide Leader since 1968 in Hydraulic, Pneumatic, and Electric Bolting. 
 
Target Markets:
Power Generation, Mining, Oil & Gas, Paper Pulp and Wood, Chemical, Heavy Equipment, Machine Shop, Solar, wind, etc. 
 
Sales Opportunity:
As our business continues to grow, we are looking to add sales representatives to our established territories. We are currently seeking dynamic, self-driven individuals to represent the world leader in precision bolting. With unlimited growth opportunity and unlimited earning potential, this is an opportunity you can't afford to not look into!
 
Company ID: 106192 - Click Here for Full Details
Product Lines:
Industry leading non-contacting ultrasonic level and flow measurement technology. Traditional contacting level equipment including float switches, point level, pressure transducers, vibration sensors, and rotating paddles. 
 
Target Markets:
Primary focus is on the water and wastewater industry. Additional opportunities reach across multiple industries including power generation, mining, food and beverage, and manufacturing. 
 
Sales Opportunity:
Industry leading non-contacting ultrasonic level and flow measurement technology. Traditional contacting level equipment including float switches, point level, pressure transducers, vibration sensors, and rotating paddles.

Primary focus is on the water and wastewater industry. Additional opportunities reach across multiple industries including power generation, mining, food and beverage, and manufacturing.

Looking for technically savvy representation to join our manufacturer's representation team to cover open territories of Montana, Hawaii, and Alaska.
 
Company ID: 106188 - Click Here for Full Details
Product Lines:
Our Company Manufactures and Distributes Pile Weatherstripping (Black, Gray, White) and Gaskets, Rubber Profiles (EPDM, Vinyl, Silicon) for Windows and Doors from Brazil to the US. 
 
Target Markets:
Our Targets are Windows and Doors Manufacturers, Parts Wholesale Suppliers, Engineers, Contractors, and/or Local Businesses throughout the U.S. and Canada. 
 
Sales Opportunity:
This is a great opportunity because we started a new business representing a company from Brazil. It has almost 20 years fabricating sealing products in South America and selling for all Latin America, we have a good quality product and price. Our commission is about 5% to 7% depends on the volume and the representative will have a direct contact.
 
Company ID: 106161 - Click Here for Full Details
Product Lines:
German Window and Door Systems for Very Expensive and Exclusive Home Market. 
 
Target Markets:
Architects, Design/Build Contractors, Homeowners. 
 
Sales Opportunity:
We manufacture custom European windows and doors. Our primary markets are very high-end and exclusive custom residential homes with a secondary commercial market that includes resort area lodges and country clubs. Most all contracts will easily exceed $100,000.00.
 
Company ID: 106152 - Click Here for Full Details
Product Lines:
Gasoline Inverter Generators (1kw - 3kw), Designed in Japan, Made in China.

Powered by Yamaha Engine or Chinese Engine. 
 
Target Markets:
America Market, Selling to all kinds Retailers such as Menards, Sears, Walmart. 
 
Sales Opportunity:
Perfect Design,a famous Japan industry designer's production. High quality, use upper level materials to matching the perfect design. Competitive Price, the retailer have more margin.
 
Company ID: 106140 - Click Here for Full Details
Product Lines:
Large 120,000 square foot Custom Job Shop Manufacturing Facility.

Along with a 45,000 square foot Laser Cladding Shop that Specializes in Manufacturing and Repairing Mechanical Components in All Industries. 
 
Target Markets:
Aerospace, Geothermal, Oil & Gas, Mining, Heavy Equipment, Pulp and Paper, Power Generation, subsea, Medical, Military, Wind. 
 
Sales Opportunity:
Our company offers a one-stop manufacturing facility that can handle small to extremely large components in small to extremely large quantities.

In-house services we provide are:
- CNC Turning
- CNC Milling
- EDM
- Robotic Manufacturing
- Deep Hole Drilling / Trepanning
- Gun Drilling
- Honing/Grinding
- Live Tooling/Mill-Turn
- Shotpeen/Glass Bead
- Copper and Gold Plating
- Zinc/Manganese Phosphate Coating
- Laser Cladding
- ID Laser Cladding
- Laser Heat Treatment
- Laser Welding
- Laser Repair
- Metallurgical Testing
 
Company ID: 106108 - Click Here for Full Details
Product Lines:
Manufacturer of Centrifugal Pump, Rotary Dewatering Pumps, Double Diapragm Pumps. 
 
Target Markets:
Nation and Local Rental Stores, Utility Contractors, Construction Contractors, Military Applications, Government. 
 
Sales Opportunity:
Great opportunity to sell a product into the pump contractor market that replaces a lot of other current units. Can save customers fuel, parts, and costly repair costs. No other pump like our pump exists in the market. We are a manufacture and product our pump models in the US, i.e. Made In The USA!
 
Company ID: 105703 - Click Here for Full Details
Product Lines:
A Hit at the National Hardware Show, Unique, Colorlful Plastic Reel.

Not Like all the Others. It is Perfect for Winding and Storing or Organizing Ropes Cords, etc., and Christmas or Party String Lights. Well-Made, Nice Looking, and Appealing. 
 
Target Markets:
Hardware Stores, Gift Shops, Home and Garden, Electrical Department, and Boating, Camping, RV, and other Outdoor Shops. 
 
Sales Opportunity:
This is a new product revising an old idea. Very unique. Needs little or no explanation. Our product is retail ready. Easy sale. Good Commissions arrangement. We will consider commission based on opportunity.
 
Company ID: 106071 - Click Here for Full Details
Product Lines:
Patent Pending auto retracting razor scraper.

First of its kind tool designed for assisting with changing blades on box cutters, utility knives, hobby knives, scraper, and more. 
 
Target Markets:
Glass manufacturing, fabricating, and glazing companies
Miscellaneous manufacturers
At-home users / consumers
Glass cleaning companies
Auto detailing shops and dealerships
Bulk distributors of safety products
Glass tinting companies
Aquatic companies (tank and algae scraping)
Contractors 
 
Sales Opportunity:
This is an excellent opportunity to promote safety tools that have features not currently found on the market. Our products can be used in numerous industries for numerous applications. We are a growing company that is open minded and motivated to exceed. Our competitive advantage I offer safer tools to protect users and to reduce the very hefty costs associated with workplace injuries, and even at home injuries. We will do what it takes to support our sales reps as we recognized that sales and distribution are a key aspect to the growth and future of our company. Commission structure is negotiable.
 
Company ID: 106053 - Click Here for Full Details
Product Lines:
Superior Roofing and Underlayment Systems. 
 
Target Markets:
One Step distribution and Pull Through Roofing Contractor Sales. 
 
Sales Opportunity:
Our company has been around for over 30 years and is known in the industry for manufacturing the best SBS modified roofing and underlayment systems available. Some of our products are shingle starter, self-adhesive and torch down cap sheet, underlayment, metal laminated cap membrane, self-adhesive ice & water, and an eco-friendly cap sheet as well. The full line product offering makes it possible to offer the whole package solution under one quality brand.
 
Company ID: 106048 - Click Here for Full Details
Product Lines:
Painting Tools Based on New Patents Ideas Revolutionary Items. 
 
Target Markets:
Sherwin Williams, Dulux, Benjamin Moore, Home Depot, Rona, Canadian Tire, Lowe's, Home Hardware, WalMart. A lot of interest from big companies. 
 
Sales Opportunity:
The opportunity is that we will give you the best product at the best price at the right time to the right people so you will be more than comfort to sale and make your commission.
 
Company ID: 106018 - Click Here for Full Details
Product Lines:
Our Product is First and Foremost a Safety Tool.

It is the Next Level in Cutting Safety and Efficiency. It is a Precision Pipe and Tube Cutting Tool that Helps you Safely, Quickly and Precisely Cut Pipe or tubing in the Shop or Out in the Field. It Provides a Secured Guard for the Saw Blade. 
 
Target Markets:
- Plumbing/Mechanical Professionals
- Welding Professionals
- Fire Sprinkler and Suppression Professionals
- Facilities Management, Municipalities, School Districts
- Automotive/Racing Teams
- Custom Fabricators 
 
Sales Opportunity:
We are new company that sells cutting edge products. At this point, California is the only active area being covered in the world. We are growing and we want to work with professionals who can handle explosive growth. We offer higher percentage commissions than most tool manufacturers due to our higher profit margins. We look forward to hearing from you.
 
Company ID: 106015 - Click Here for Full Details
Product Lines:
Valve Tester Machines
Valve Tester Spares
Process Valves
Compressor Valves
Compressor Spares Air, Gas, and Reciprocating 
 
Target Markets:
The United States Navy
The Oil & Gas Industry
Refineries
Chemical Plants
Nuclear Plants
Valve Manufacturers
Valve Rebuilders
Valve Servicing Companies 
 
Sales Opportunity:
Unique opportunity to join a 38 year old manufacturer and take us to the next level. Only 5 competitors globally.

Our company can provide a solution to a common problem of carrying out Shell and Casing Valve Tests easily. We are a privately owned engineering company supplying different valve testers to various industrial sectors globally for over 38 years. Our founder started manufacturing Valve Testers in 1978.

We were the first to introduce valve testers and set the standard for all valve testing. Our Valve Testers provide a method of accurately and speedily testing valves at a relatively low cost per unit and designed with the test operator in mind. We strive to maintain that level of Durability, Value and Technology well into the future.

We manufacture Valve Testing Equipment ASME approved with a patented design. To date, we have manufactured over 850 Valve Testers from 1/4" through 60" Valves, with 50 PSI (Test Pressure) to 60,000 PSI and applied up to 2,240 Tons Sealing Force. The majority of our Valve Testers are built to the customer's exact specifications, however we also manufactures 42 Standard Valve Tester Models.

A section of our clients: US Navy, Chevron, Shell, Conoco, Portland Cement Plants, Cameron Valves, Amoco, Hess Oil, Cooper, Tyco Netherlands, Weir, Saudi Aramco, ExxonMobil. We can provide a complete list on request.
 
Company ID: 106011 - Click Here for Full Details
Product Lines:
Various Ductile and Gray Iron Castings from .50 pounds to 2,500 pounds. 
 
Target Markets:
Oil and Gas, Machine Tool, Gears, Housings, Pipe Fittings, Hammer Heads, Steam. We are a Jobbing Foundry will Quote Almost Anything in Iron. 
 
Sales Opportunity:
We are a ductile and gray iron foundry that wants to grow the business and are reaching out to sales reps will to work on commission we pay up to 5% of sales that is brought in by our reps.
 
Company ID: 106010 - Click Here for Full Details
Product Lines:
IPE and Cumara Decking. IPE Outlasts Most Decking Products on the Market.

IPE'S Strong, Tough Resilient Properties make it an Excellent Material and Popular Choice for Commercial/Residential Decking. IPE has a Class A Fire Rating, the Same Rating given to Concrete and Steel. 
 
Target Markets:
Lumber Suppliers, Building Product Distributors, Building Contractors, Home Improvement Contractors. 
 
Sales Opportunity:
We import the product directly from manufacturers in South America. You'll be the first tier Sales Representative with a Premium Quality product available at below market prices. Dare to compare this opportunity at a potential of 15% to 30% commission rates.
 
Company ID: 105989 - Click Here for Full Details
Product Lines:
Spray Foams
Adhesives
Sealants
Automotive Lubricants
Tapes
Wood Glues
Super Glues
Polyester Stone Glue
Coatings 
 
Target Markets:
Construction Building Material suppliers, Hardware stores, Distributors, OEM, DIY, online retailers. 
 
Sales Opportunity:
Our company is looking for independent reps and agencies to partner with in selling our products nationwide. We manufacture over 400 products and sell over 110 countries in the world. Our product quality is proven and needs a successful sales team to take it to a next level.
 
Company ID: 105996 - Click Here for Full Details
Product Lines:
Agricultural and Industrial Sprayers new to the U.S. Market. 
 
Target Markets:
Wholesalers, Distributors, Retailers. 
 
Sales Opportunity:
World Class manufacturer of Compression Sprayers, new to the U.S. Agricultural, Industrial and Lawn & Garden Sprayer Company. Headquartered in Spain, and over 50 years in the manufacturing of Compression Sprayers. Currently selling to over 100 Countries. Office and Warehouse in Massachusetts. Aggressive Commission based Program offered to Reps.
 
Company ID: 101999 - Click Here for Full Details
Product Lines:
We Manufacture Steam Trap Replacement Devices.

Our Devices Differ from other Mechanical Steam Traps because they have No Moving Parts. It’s Impossible for them to Fail Open and Waste Energy. All Stainless Steel Construction and Lack of Moving Parts, Results in Virtually Maintenance Free Operation. 
 
Target Markets:
Potential Customers include End-Users who Generate and/or Use Steam for Processes and/or Comfort Heating. This includes: Industry, Manufacturing, Chemical Processing, Hospitals, Colleges/Schools, Government Facilities, DoD, DoE, Institutions, Utilities, Engineering Firms, Contractors, etc. 
 
Sales Opportunity:
We take pride is providing customers with value added, long term, solutions to steam trap related maintenance and production problems resulting in energy savings. We have been in business since 1996. Our products are manufactured in the USA. We provide our representatives with technical support so they may become an asset to their customer. We offer an aggressive discount/commission structure starting at 25%.
 
Company ID: 99376 - Click Here for Full Details
Product Lines:
Surface Protection Film. 
 
Target Markets:
Manufacturers & Distributors, Marine, Automotive, Trucking, Construction, Metal, Fabricators, Aluminum, Glass, Composite Surfaces, Window, Aircraft, Packaging, and more. 
 
Sales Opportunity:
The opportunity is to sell residue-free surface protection film at 50%-70% less than the competition and make 10% commission. This film is a commodity item made in New Jersey. We sell it by the skid. A skid of film sells for $5,000. Our customers buy it, use it (It can only be used once) and reorder it. Lots of opportunities to be creative and grow into new markets. Full factory support training, sales material, samples and order processing provided.
 
Company ID: 103950 - Click Here for Full Details
Product Lines:
A Cordless Wet/Dry Vac with Added Value for Pet Owners.

Along with the Usual Messes, this Vac Allows for Sanitary, No Bend or Touch Solution for Various Types of Pet Waste. 
 
Target Markets:
This product would be of tremendous value to Homeowners with a Dog/Cat, Commercial Cleaning Companies, Building Maintenance/Grounds Keepers, Parks and Recreation, Dog Walkers, Sitters, Boarding, and Services that Clean Dog Owners Yards. 
 
Sales Opportunity:
This is a great opportunity because this is a product many homeowners are familiar with, so there will not be the hassle of having to educate customers on a new technology. The fact that this product also expands into the lucrative pet market, offering a unique solution to the most dreaded chore pet owners face.

It has Patent Pending features to ensure its unique value remains so. This is a new company. I'm open to different possibilities and negotiable commission structures. A great opportunity to tap into a combination of industries that would benefit from the value of this product.
 
Company ID: 105929 - Click Here for Full Details
Product Lines:
Warehousing, Distribution, and Fulfillment Centre Services. 
 
Target Markets:
Manufacturers
Wholesalers
Distributors
Retailers 
 
Sales Opportunity:
Seeking new customers who manufacture, wholesale, or distribute products ranging from automotive parts and accessories to dry foods and dry goods. This is an awesome opportunity to work with a true professional in the space of warehousing and distribution that provides verifiable savings to your business operations and daily productions. We truly deliver great results!
 
Company ID: 105801 - Click Here for Full Details
Product Lines:
Our product is a 35 inch Wall Mounted Wooden Back Scratcher with an Epoxy Texture to Simulate Tree Bark. 
 
Target Markets:
Our Target Markets are People who are Seeking a Unique Gift for Men. Second to that are Men who Rub their Backs Against Doorways and Walls to Itch their Back. Anyone in the Man Cave Markets are a perfect fit for our company. 
 
Sales Opportunity:
We seek motivated Reps who are established in the gift and novelty markets. We provide promotional information, prices, and samples of our product. The MSRP is $24.99, and the wholesale price is $12.50. Each display holds 24 units and comes with a 2 sided display sign. Each wholesale case is $299.99. We offer Net 30 Terms to qualified businesses, and we accept credit cards. Commissions to Reps are 15%. Reps send us the P.O.'s we ship. Payouts to reps are Once a month.
 
Company ID: 105695 - Click Here for Full Details
Product Lines:
We Custom Manufacture Low to High Volume, Technically Challenging, Micro to Mid Size, Thermoplastic Injection Moldings, and Assemblies for a Diverse Range of OEM Customers. 
 
Target Markets:
Our Product and Service Offerings Appeal to OEM Engineers and Purchasers in the Aerospace, Medical Devices, Electronics, Industrial, Defense/Security, and Automotive Sectors. Who Gain Tangible Benefit from Partnering with a Value-Added, One-Stop Service Provider. 
 
Sales Opportunity:
From concept to final product, we are a preferred source for plastic injection moldings and assemblies. Rest assured our commitments are delivered on-time, on-budget, to exacting specifications. Specialists in precision moldings up to 55 square inches projected area, micro moldings as small as .1 gram, over molding, and reel to reel molding. Our pristine 60,000 square foot manufacturing plant is equipped with the latest in injection molding technology, ranging in size from 2.5 to 220 tons clamping force, ensuring that we meet the most demanding of customer specifications.

Founded in 1997, our privately held company is ISO 9001:2000, ISO/TS 16949:2002, AS9100B and soon to be ISO 13485 Certified, demonstrating our commitment to the highest levels of quality performance, in an arena where failure is not an option. From initial design consultation, our well equipped mold repair tool room, various in-house secondary capabilities including pad and digital printing, ultrasonic welding and heat stacking, to name a few, our Class 10000 clean room, through to final assembly, we are the one-stop shop that can get customers products to market faster and more economically, enabling them to gain greater market share.

We are looking for commissioned, engineering oriented sales representatives to open new doors, and sell our unique value proposition to OEMs in select USA and Canadian territories. This is a terrific win/win opportunity for a salesperson with a "can do" hunter mentality.
 
Company ID: 105870 - Click Here for Full Details
Product Lines:
We are Manufacturer Wholesalers and Distributors of All Kind of LED Light for Commercial and Residential. 
 
Target Markets:
End-Users, Wholesalers, Lighting Stores, Electrical Contractors, Architects, Construction, Motel and Hotel Industry. 
 
Sales Opportunity:
Opportunity for sales rep is 10%-15% on sales. Different price for big quantity. Competitive price with best quality. We believe in long business relationship and work as a family.
 
Company ID: 105868 - Click Here for Full Details
Product Lines:
New Patent Pending AC No Hole Window Locking System.

It is a Unique Design that Secures an Air Conditioning Unit into a Double Hung Window Opening Securely, No Holes or Screws Used to Void Window Manufacturer Warranties, Prevents Burglars from Pushing AC Units into Windows and Blends In with Window. 
 
Target Markets:
Retail, Brand Manufacturers, Contractors. 
 
Sales Opportunity:
I am seeking a License Deal for my AC No Hole Window Locking System. This is the only security product available of its kind for a portable window air conditioner, has a clean look, no one will know its a lock. Will not damage window or frame. Easy install by anyone, only a two part system. Sales Marketing Brochure. Prototypes in use. I am offering 40 percent of my royalty on going for a License Agreement. Ground floor Opportunity for the right Representative.
 
Company ID: 105712 - Click Here for Full Details
Product Lines:
Our Company Manufactures and Sells Nationwide a Cable Concrete Articulated Concrete Blocks System Used to Protect and Stabilize Numerous Soil Erosion Conditions. 
 
Target Markets:
Our Products have been Tested by Numerous Testing Facilities in the USA and Canada. Since 1984, Cable Concrete has been Used Extensively by most State and Federal Agencies, DOTs as well as over 50 Military Bases. 
 
Sales Opportunity:
This hard armour revetment is an alternative to traditional rip rap and can be used for dam spillways, retention pond linings, access roads, channel and bank stabilization, bridge scour protection, low water crossings, boat ramps, and landfill down chutes. Our ability to produce on site creates significant savings. We are registered and have assisted with FEMA on many projects, past and future.

We assist engineers at the beginning stages of design, and offer a permanent solution to serious erosion problems.We proud of the fact that the US military has used this product in over 200 military locations and are a regular customer. Our mats are used for low water crossings which are subject to constant flooding conditions and endless abuse of military tanks and armored vehicles.
 
Company ID: 84406 - Click Here for Full Details
Product Lines:
Our Industry Leading Line of Marquee Lights.

Type Fonts & Numbers in 1', 2' and 3' Sizes and Shapes like Flamingos, Shamrocks, Hearts, Stars, and many more. Our Beds are Ultra-Green, Totally Portable, Set-Up in a Minute with No Tools. So Sturdy they Come With a Lifetime Guarantee. 
 
Target Markets:
Event and Furniture Rental Companies, Wedding Planners, Specialty Mass, AAFES, College Housing, Property Management, Hospitality and Event Venues, Commercial Interior Designers, Photography Studios. 
 
Sales Opportunity:
Our company is comprised of experienced, successful entrepreneurs, state-of-the-art US manufacturing facilities and award winning consumer product designers. Our mission is to produce unique, American made products that add to the quality of life of American consumers and do so in as environmentally responsible a manner as possible.

For example, for every bed sold, we plant 20 new trees; more than enough to replace the wood we use and add to the planets forest reserves. Our beds are made from American wood from FSC certified sustainable forests and all stains and finishes are environmentally friendly. Our line of Marquee Lights are professional quality, made in the USA steel lighting; rated for both indoor and outdoor use, perfect for large events or as affordable signage for businesses of all types that want that "Hollywood Red Carpet" flair.

Both of these lines are value priced in the mid to high end market. Our beds compare very favorably to contemporary Italian bedroom furniture but at less than 1/2 the price. They are also MUCH stronger than the European imports. The Marquee Lights are very competitively priced vs. similar metal lighting.

In other words, we believe this line is poised to be a real game changer in the specialty décor/home furnishings markets. We have successfully built companies with rep focused sales staffs in the automotive and gift markets and we look forward to doing the same again with the help of some great rep group.
 
Company ID: 105849 - Click Here for Full Details
Product Lines:
Unique Architectural Surfacing and Counter Top Material.

We have a Blend of Luxury and Entry-Level Products for both Commercial and Residential Projects. 
 
Target Markets:
Architects and Designers. 
 
Sales Opportunity:
We are a small but fast growing company that is looking for a talented Rep or Rep Group to help us grow our product lines in the Architectural and Design community. We are based in Austin, TX and looking for a well contacted and experienced person or group to cover the Austin and San Antonio market. We provide territory exclusives as well as marketing allowances.
 
Company ID: 105828 - Click Here for Full Details
Product Lines:
Automotive, Engine, Vehicles, etc. 
 
Target Markets:
Tier 1, 2 and 3. 
 
Sales Opportunity:
We're exploring any income possibilities. The niche market products that create opportunities to tell a new story. We want to look at everything that's available.
 
Company ID: 105814 - Click Here for Full Details
Product Lines:
Chip Brushes, Assorted Paint Supply Products. 
 
Target Markets:
Master Distributors, Distributors, Retail. 
 
Sales Opportunity:
Brand new paint supply company with an increasing product line priced at extremely competitive prices. We are a direct supplier, priced as close to wholesale as you can get.
 
Company ID: 105803 - Click Here for Full Details
Product Lines:
Shabby Chic Furniture Appliques, Onlays, Cottage Style Hardware. 
 
Target Markets:
Home Decor Stores, Gift, Home Goods, Paint & Molding Businesses, etc. 
 
Sales Opportunity:
Our company now wants to expand! We are now in our 12th year and growing approximately 25% per year. We are looking for great people/sales reps. To offer our products to the home decor market ~ gift stores , etc.
 
Company ID: 104985 - Click Here for Full Details
Product Lines:
Manufacturer of Resin, Rubber, Shellac, & Epoxy Bonded Abrasives Up to 36".

Known for our On-Time Deliveries, Approximately 1/2 Industry Standard. Engineered Products Specific to Application with a Reputation of Product Quality & Consistency. Extremely responsive with grit range from 16-600 Grit. 
 
Target Markets:
We Service a Large Range of Markets: Aerospace, Mills, Automotive, Bearings, Broaches, Cutting Tools, Cutlery, Stone Trade, Foundries, Metal Fabrication, Metallurgical Labs, Oil Field, Precision Gages, Saw Blades, Ship Building, Springs, and Valves. 
 
Sales Opportunity:
We are an USA owned, USA made abrasive manufacturer, large enough to have a strong presence in the market, small enough to remember that service & quality are still very important. We have a very strong support system for our representatives both inside & outside field support.

Specialize in developing product to solve & enhance customer requirements competitively. Definitely a value added sale that will be appreciated by your distributors & their customers. Aggressive commission structure with bonus opportunities.
 
Company ID: 105790 - Click Here for Full Details
Product Lines:
Copper, Galvanized, Aluminum Leaderheads Fancy, Plain, and Reproductions of Historical Leaderheads.

We also Produce Old Style Skylights, Scuppers, Flashings, Copings, Cornices, and Pitch Pockets, etc. 
 
Target Markets:
Wholesale Distribution (Roofing, Siding, and Gutter Suppliers), Contractors, and Building Maintenance Companies, and Owners. 
 
Sales Opportunity:
We have been selling regionally since 1997. Our products are well made and competitively priced. I have sold similar products that got lots of complaints, and started producing my own at the request of distributors in my area when the consolidation of the industry dried up the makers of similar quality products starting late in the 1990's. I have been working in the NYC marketplace for over 50 years and am looking to expand my reach to new markets.
 
Company ID: 105698 - Click Here for Full Details
Product Lines:
Production in Small to medium size Metal Stampings. Machinery Used for Producing Parts are 28 and 33 Multi-Slides. 
 
Target Markets:
Manufacturers who are in Need of a Part to Complete their Manufacturing or Assembly of a Part. 
 
Sales Opportunity:
Foe each sale for a production part we will pay a 5% commission each time we produce the part. Also if you find a production part for us to produce from a company and they inturn order more parts from us we will pay 5% on all parts we produce from that company.
 
Company ID: 105767 - Click Here for Full Details
Product Lines:
Sealing & Thermal Insulation Materials, Fiberglass Products, Silica & Ceramic Fiber Products,(High Silica Fiberglass Fabric), Welding Protective Accessories, Fire Resistant Suit, Welding & Fire Blankets, Welding & Safety Gloves, Tarps & Tarpaulin, Kevlar and Carbon Fiber Fabrics, and Materials. 
 
Target Markets:
RV & Boat Manufacturing, Manufacturing Housing, Construction, Builders and Distributors/Suppliers of Thermal Insulation and High Temperature Heat Resistant Materials like Fiberglass, Welding Distributors, Welding Suppliers, Trucking Companies (Tarps),Food Industry, Electrical Suppliers/Distributors of Materials. 
 
Sales Opportunity:
We are looking to share our profits with you! How about a great opportunity to rep quality materials at affordable pricing? Want amazing support? How about a residual income stream? If you said yes, we want to talk with you!

We offer a very lucrative compensation package with exclusive territories available and residual incomes! Excellent communication with dedicated one-on-one support. Custom quotes welcome. Samples available at no cost. Warehousing and Distribution services offered. If your customer can dream it, we can get it!

Corporate office located in Bellevue, WA. We are currently searching nationwide for (1099) Independent Manufacturer Representatives to represent our products (High-temperature heat resistant fabrics, fiberglass insulation materials, Silicone, Ceramic, Kevlar & Carbon fiber fabrics & materials, Welding blankets, Welding gloves & a wide variety of Tarps) for all US Markets including Hawaii & Puerto Rico.

The ideal candidate will have established customer relationships within the above focus markets & possess an entrepreneurial spirit, however, willingness to "roll up your sleeve & jump in attitude" welcome. In addition, candidates should be successful at managing existing business as well as developing new business. Training & some leads provided. If you are looking to expand your existing lines, increase your earnings potential & have fun in your territory with great manufacturing support, we look forward to learning more.
 
Company ID: 105757 - Click Here for Full Details
Product Lines:
High-End Modern Vanities, Kitchen & Bath Sinks, Bath Counter, Handles & Knobs. 
 
Target Markets:
Kitchen & Bath Showroom Dealers, Contractors, Architects, Interior Designers, Builders. 
 
Sales Opportunity:
High-end quality & appearance with reasonable price. We sell direct, no middle man, 8 years in business, over $5 million in revenue. Train over the phone for out of state rep or stop by headquarter for actual product tour. 10% straight commission on all products.
 
Company ID: 105763 - Click Here for Full Details
Product Lines:
Hydraulic Cylinder Repair Equipment. 
 
Target Markets:
From Big Construction and Mining Companies to Small 2 Man Shops. 
 
Sales Opportunity:
Looking to have exclusive representation in a territory where a representative would receive all sales leads and have full control of said territory with an attractive commission based pay scale.
 
Company ID: 105735 - Click Here for Full Details
Product Lines:
We Build Software for Agriculture Landfills and Construction.

It Includes Control of Machines Using GPS for Grading, Paving, and Water Management. 
 
Target Markets:
Equipment Dealers, Municipalities, and Large Customers. 
 
Sales Opportunity:
We have been involved with GPS machine control for 25 years. We have pioneered the majority of construction and agricultural machine control ahead of CAT, Trimble, and Topcon. Although we have sold over 5,000 units we have never developed a proper sales team. We understand the industries we serve but not the sales process. We are looking for that expertise.
 
Company ID: 99431 - Click Here for Full Details
Product Lines:
Product Line 1: Machined Copper Alloy Investment Casting Parts, for example C95800 Bronze Parts, for Electric, Marine, and many other industries. We are capable of manufacturing highly engineered parts.
Product Line 2: All sizes of Anchor/Chain Shackles, especially for high strength shackles. 
 
Target Markets:
1. Company for Electric Industry is most likely to be our Potential Customer for Copper Alloy Casting Parts.
2. Shackle Distributors. 
 
Sales Opportunity:
This is a good job opportunity for experienced Reps who might have been working in the related industry field for years. We are one of the few manufacturers capable of making high strength shackles. For example, we make 3" shackles with breaking load no less than 1,100,000 lbs.
 
Company ID: 105215 - Click Here for Full Details
Product Lines:
High and Low Solids Silicone Roof Coating as well as All the Other Materials Associated with Silicone Roofing including but not limited to Foam, Caulk, Tapes, Flashing Grade, etc. 
 
Target Markets:
Reps would then be Selling to Roofing Contractors, Building Owner, Architects, Schools, etc. 
 
Sales Opportunity:
This material does not need a primer most of the time saving your clients time and money. We allow our reps to run their markets the way they see fit, as long as sales are there.
 
Company ID: 105690 - Click Here for Full Details
Product Lines:
Underlayment Products for the Roofing Industry including Organic Saturated Felt, Synthetic Felt, SBS Self-Adhered Rolls, Builder's Paper, Ice and Rain Guard, Roll Roofing, House Wrap, Nail Base Sheets, Window and Door Flashing Tape. 
 
Target Markets:
One-Step, Two-Step Distributors, Big Box Stores, Supply Stores, Lumberyards, Co-Op Groups. 
 
Sales Opportunity:
We are one of the leaders in the saturated felt industry with over 35 years of successful operation. Our brand is well known for its high quality and we have a very large capacity to meet the demands of our customers. We are looking for sales reps that are aggressive and want to earn lots of money! Experience in the roofing industry is preferred and we will provide additional training for product and technical knowledge. Our territories are wide open throughout the midwest, eastern and southeastern parts of the country.
 
Company ID: 105687 - Click Here for Full Details
Product Lines:
Manufacturer of Translucent Fiberglass Resin panels for Religious and Commercial Applications.
Religious: Cost Effective Stained Glass windows made with Fine Fiberglass Resin Panels.
Commercial: Combination of Acrylic with Fiberglass strength translucent panels. 
 
Target Markets:
Architects
Church Furnishings
Religious Builders
Interior Designs
and many more. 
 
Sales Opportunity:
Our product offers a unique and wide range of applications, starting from Religious windows to the most modern design for modern buildings. Help us grow and come on board for an unique product experience on both markets: Religious and Commercial. With your extensive experience and our limitless product application, I am sure we could have a lucrative operation for both of us. call me and let's discuss this opportunity for both of us.

Thanks.
 
Company ID: 105683 - Click Here for Full Details
Product Lines:
A Quality, Specially Designed, and Beautifully Crafted Infrared Sauna Designed to Double as a Fully Functional Piece of Fine Furniture (Desk, Dresser, or Armoire), and will Fit Almost Anywhere.

Our Saunas Provide the Ultimate in Relaxation, Health Benefits, and Add Character and Charm to any Décor. 
 
Target Markets:
You will be Selling to Architects, Home Builders, Interior Designers, Hotels, Spas, Wellness Centers, and Private Consumers that have an Interest in Alternative Methods for Maintaining Good Health and Reducing Stress. 
 
Sales Opportunity:
There is a growing trend for people to take charge of their own health and well being. The benefits of infrared saunas are becoming increasingly well known, especially for detoxification and stress relief. Our saunas are unique as they are built into another piece of furniture, are of high quality, and will fit into almost any space a dresser, desk or armoire will go. There is nothing on the market like this, and high value products produce healthy commissions. We are looking for independent sales reps on a commission only basis.
 
Company ID: 105658 - Click Here for Full Details
Product Lines:
Our Company is Manufacturer of Natural Stone Mosaics, Blend of Glass & Stone Mosaic, Wall Cladding, Pebbles Stone Tiles, and Other Design in Various Type of Indian and Imported Stones. 
 
Target Markets:
We are looking for marketing in entire USA and Canada. 
 
Sales Opportunity:
Our product is unique and already have an existing market. We are looking for people who can promote our products in entire USA and canada. The products have high quality standard and sold in top stores in USA and Canada.
 
Company ID: 105669 - Click Here for Full Details
Product Lines:
We Provide Strategic Surveys for Manufacturing, Heavy Industry, Government, Transportation, and Automobile and Truck Dealers.

Product Packages are Major Sales Effort Providing Sales Representatives with Increased Sales Opportunities. 
 
Target Markets:
Contacts are Owners, CEO(s), Management, and HR Executives. 
 
Sales Opportunity:
Company has the only scored, bounce-back, survey results return in the country. Company executives have never seen a way where they can:

1. Motivate all employees.
2. Retain quality employees, truck drivers, etc.
3. Substantially reduce turnover.
4. Pre-qualify employees, drivers,et. at time of hiring.
5. Reduce all employment costs.
6. Significantly improve profits.
 
Company ID: 105639 - Click Here for Full Details
Product Lines:
Commercial Repaint Jobs. 
 
Target Markets:
Subdivision, Government, School. 
 
Sales Opportunity:
We are a Commercial and residential painting, hot/cold pressure cleaning, Electrostatic painting system with 9 years in business. Certified by Miami, Dade, and soon with the Federal Government. We are looking for a sale rep to expand.
 
Company ID: 105601 - Click Here for Full Details
Product Lines:
LED Lighting 
 
Target Markets:
LED Lighting End-Users, LED Distributors, Current Customers. 
 
Sales Opportunity:
Our product is the most economical way to convert to LED a fraction of fixture LEDs. We are the original innovator and patent holder for this technology. We own our factory, we are a USA Owned company and have been around 15 years and we are diversified into other parts of LED (ie medical, etc.) and as a result have become completely sustainable. Reps will be trained and given warm leads and national accounts to help manage along with our customer service. We offer a highly competitive 3 tier commission structure. Sales reps have all latitude to choose for their accounts.
 
Company ID: 101275 - Click Here for Full Details
Product Lines:
NEW: "Hybrid Generator" Renewable Energy Technology:

- Low Cost (Half the Capital Cost of Solar)
- Compact (Uses 1% the Space of solar)
- Powerful (525,000 kWh/yr per Unit)
- Scalable (Up to 50 MW per Location)
- Produces Electricity 24x7
- Zero Carbon Footprint 
 
Target Markets:
Geography: US & Canada

Prospects: Sell To MANY Private & Public Sector Entities Across MANY Industries Looking To: a) Implement Renewable Energy Solutions, and b) Develop Renewable Energy Projects!

Decision Makers & Influencers: VP/Director of Sustainability/Renewable Energy, CEO, CFO, Owner, etc. 
 
Sales Opportunity:
IMPORTANT: YOU MUST HAVE RENEWABLE ENERGY EXPERIENCE & CONNECTIONS and Access To Organizations that are Buying!

Solar has major limitations/constraints, as do wind, fuel cell & many other technologies. Buyers And Investors want better options! The "Hybrid Generator" has an ultra-low capital cost of electricity, and is a compact, powerful, scalable, commercial unit.

The "Hybrid Generator" is a highly differentiable and disruptive technology. So unique and innovative that majority of sales contacts you make will be interested after one conversation! Most organizations that are buying and looking at renewable energy solutions tell us that they have never seen anything like it for meeting their needs.

Full sized prototypes available shortly. Tentative product launch in 3Q 2016 time frame. Units being sold Now! Solid prospect and sales pipelines. US market has strong demand for renewable energy solutions. New ways to produce green energy are being aggressively sought. Large investors sold on this technology & its promise.

US distributor has arranged financing options for well-qualified buyers. Large sources of capital identified for the development of utility scale energy projects. Looking to appoint Authorized Representatives with access to the staggering number of US & Canadian organizations moving forward with renewable energy.

High income opportunity. 1099 contractor positions.

CANDIDATES MUST HAVE RENEWABLE ENERGY EXPERIENCE & CONNECTIONS!
 
Company ID: 105598 - Click Here for Full Details
Product Lines:
Our Company Manufactures Erosion Control and Storm Water Management Products.

Manufactured from Highly Durable Geotextile Fabrics. Marketed to HD Supply, CalTrans, and others. Expanding to Consumer Vertical. 
 
Target Markets:
Home and Garden Stand Alone or Department Retail. As a partner for the HD Supply Industrial/Commercial Sector, we are most Comfortable Dealing with Medium to Large Concerns where our Familiarity with Larger Scale Supply Chain and Logistical Environments set us apart from other manufacturers. 
 
Sales Opportunity:
Controlling water flow in a residential backyard, around planters, swimming pools, drain down spouts, etc., are most often accomplished via some sort of improvised solution. We can manufacture anything that makes sense to solve this problem, and the best part of it is, we’re essentially there with our existing line. We need to find the right rep company to provide final direction and an introduction to the most appropriate retailer(s).
 
Company ID: 105315 - Click Here for Full Details
Product Lines:
Sales will be Selling our full Line of Square Shaft and Linear Bearings with Round and Square Housings, as well as our line of Dovetail and Mountable Units Standard and Heavy Duty.

All of these with Capability of Interchanging Between Reciprocating Path Ball Bearings and Self Lubricating Slides. 
 
Target Markets:
Multiple markets Worldwide: Fabricating, Paper Mills, Mining Equipment, Textile Mills, Military Support Equipment to name just a few. We have Sold Bearing Systems all over the continental US, Mexico, Canada, South Americas, Europe, and Asia. 
 
Sales Opportunity:
We are an established company with a product line that is used across broad markets hence, somewhat resilient to "downturns" of one sector of the economy or another. Our company has been recently purchased by a new owner and moved to Northwest Indiana, has streamlined numerous existing processes and currently has had not one late or returned order since reopening 6 years ago!

As noted above in Target Markets, we have sold product throughout the U.S. and 4 continents, encompassing 13 different countries. Our product is entirely "Made in the U.S.A" and we promote that and want our reps to do the same! This opportunity is "Commission Only" so your success depends not only on us, but you as a salesperson!
 
Company ID: 105563 - Click Here for Full Details
Product Lines:
Hotel, School, College, Prison, Jail, Government, Military, Restaurants. 
 
Target Markets:
Hotel, School, College, Prison, Jail, Government, Military, Restaurants. 
 
Sales Opportunity:
Sales Representative Job Duties:

* Build your market share with our uncapped potential, obtain orders, and establishes new accounts by planning and organizing daily work schedule to call on existing or potential sales outlets and other trade factors.
* Adjusts content of sales presentations by studying the type of sales outlet or trade factors.
* Submits orders by referring to price lists and product literature.
* Keeps management informed by submitting activity and results reports, such as daily call reports, weekly work plans, and monthly and annual territory analyses.
* Opportunities to build a sales Territory and have others working for you.
 
Company ID: 94763 - Click Here for Full Details
Product Lines:
Hose Protection
Sanitary Hose Assemblies
Sanitary Hose Couplings 
 
Target Markets:
Industrial Hose Users and Food and Beverage Processors. We are currently selling to Food, Petroleum, Chemical, Cosmetic, Beverage (Coca Cola, Pepsi) processors, and more. 
 
Sales Opportunity:
In 2014 we introduced the First Universal Adjustable Hose Donut. The acceptance has been fantastic. Anyone using industrial hose is a potential customer. We are currently selling to Food, Petroleum, Chemical, Cosmetic, Beverage (Coca Cola, Pepsi) processors, and more.

Nothing compares. Perfect fit for almost every application. Priced lower than other inferior products.

Our 2nd product is a Sanitary Hose Coupling used in food and beverage processing plants. A better design that is priced lower than all others. Our hose donut can be sold in multiple industries, but when combined with our sanitary hose assemblies we have an unbeatable combination. Your job would be to sell sanitary hose assemblies that we assemble and ship all over the United States. Our pricing is well below the competition for a product with a better design for which we have exclusive rights to sell.

Submit a sales inquiry to us to discuss the opportunity. These hose assemblies sell between $300 and $1,000 with repeat purchases. We are looking for a Sales Rep who is interested in selling direct to the end-user with a 25% commission.
 
Company ID: 105568 - Click Here for Full Details
Product Lines:
Decorative Laminate is a Multi-Layer Rigid Calendered Thermoplastic Material that is Produced from Polivinyl Chloride (PVC) and is suitable for Use on Fine Residential, Contract Furniture, Fixtures, and Casework, also for Architectural Applications, Interior Doors, and Divider Systems. 
 
Target Markets:
Store Fixtures Manufacturers, Fabricators, Cabinet Shops, Furniture Manufacturers, and Distributors. 
 
Sales Opportunity:
Our Patent Pending decorative laminates combine the following physical and chemical characteristics that innovate the industry:

1. Colorthrough in all solid and metallized colors and selected prints.
2. Fire retardant in every single color / pattern.
3. Endless wear/abrasion resistance in solid colors and up to four times higher resistance than conventional laminates in all our prints.
4. Bendable without heating up.
5. More than two times impact resistance than conventional laminates.
6. Realistic effect of our “Synchronicity” technology, where a structure is imprinted on the surface of the laminate to match the grains and knots in the wood, creating a dramatic level of realism.

We support with Chains, folders, catalogs and currently working on a wall board too. We pay commissions upon collection.
 
Company ID: 105566 - Click Here for Full Details
Product Lines:
Flexible Urethane Trim Moulding (Crown, Basecap, Chair Rail). 
 
Target Markets:
Southeast, Northeast, Midwest. 
 
Sales Opportunity:
We are looking for a sales rep that is well-connected with building supply companies in the Southeast, Northeast, and Midwest United States. We have been in the curved millwork business for over 20 years and are looking to expand our geographic reach for sales of flexible urethane moulding.

The products are generally sold to the residential and commercial construction markets through building supply companies. Please submit a sales inquriy to us for additional information on the product and how we may be able to build a successful partnership.

Thank you!
 
Company ID: 105557 - Click Here for Full Details
Product Lines:
Industrial Gaskets 
 
Target Markets:
Oil Refineries
Food Processing
Power Plants
Utilities
Commercial Construction
Waste Water Management
Water Purification
Marine Applications 
 
Sales Opportunity:
We are a 75 year old company selling industrial gaskets in in the US, Canada, China, Puerto Rico, and Greece. We build custom gaskets as well as sell standard gaskets. Most of our US business is from the US east-coast customers. We strongly believe that we have huge opportunity in the Southern US States (oil, gas, factories, chemical plants, etc.), and mid-west (manufacturing). The Reps will get excellent sales commission and tons of marketing help to make them successful.
 
Company ID: 105550 - Click Here for Full Details
Product Lines:
Athletic Field Paints, Paint Removers, Conditioners, Paint Removal Equipment. 
 
Target Markets:
Professional Sports Venues, Colleges & Universities, Parks and Recreation Groups, High Schools, etc. 
 
Sales Opportunity:
A very specialized product line that needs an expert in selling to our target markets. Strong, long term client relationships make this job work with no limit on commissions or territory.
 
Company ID: 105547 - Click Here for Full Details
Product Lines:
Door Locks, Keys & Keying Parts, Commercial Hardware, Bath, Builders, Cabinet Hardware, Door & Window Hardware, Fasteners, Sealants, Adhesives, Putty, Sundries & Painting, Screen & Storm, Tools, Weather-Stripping & Trim. 
 
Target Markets:
Selling to Lumberyards, Hardware Dealers, Millwork/Door Shops, Cabinet Shops, Fine Hardware & Decorative Showrooms, Commercial Door & Hardware, Locksmith, etc. 
 
Sales Opportunity:
Our company is a wholesaler of builder’s hardware to retail professionals across the United States. We are a company with a strong reputation for success; dedicated to continual improvement in the distribution of quality hardware products with a continued commitment to the communities we serve. We area distributor over over 70 quality name brands with an emphasis on door locks and hardware. We pride ourselves on service beyond the sale. Were a family owned distributor, come hear our vision and join our team!
 
Company ID: 103546 - Click Here for Full Details
Product Lines:
Home Décor, Holiday Décor, Lighting, Garden Products. 
 
Target Markets:
Big Retailers - Lowes, Home Depot, Menards, Target, Fred Meyer, Macy's. 
 
Sales Opportunity:
We are a fast growing company looking to expand to big retailers. We are a company providing its customer with the latest technology, fashion, and design at cost effective pricing.

Business Strategy – To design and source high quality, innovation products to meet the needs of the consumer while staying ahead of changing trends.
Business Advantage – We are able to bring products at a lower price because we stock all goods in our warehouse. We have dedicated design and sourcing teams who aim to stay ahead of trends and understand the market place as it relates to consumer habits. Our sales and analytical teams bring the best valued products in the home décor arena.
Committed to Innovation – We strive to stay in tune with our customer’s needs keeping our focus on function, fashion and technology.
 
Company ID: 105538 - Click Here for Full Details
Product Lines:
* Mini Split 1 Zone 09-36K Btu/h DC Inverter.
* Mini Split 2-5 Zones 30CH to 60CH DC Inverter Multiple Zone Without Branch Boxes.
* Mini Split 9 Zones 90CH DC Inverter Multiple Zone with Branch Boxes.
* VRF-Heat Pump with Hyper Heating 5F 100% –22F 80% Heating Capacity Outputs
* VRF-Heat Recovery 
 
Target Markets:
Distributors (Big Contractors), Government Projects, and Builders/Owners. 
 
Sales Opportunity:
Our company is looking for commission based sales reps in your area who have connections and good relationships with local distributors, contractors, architects, and builders/owners, to help specify, market, and sell our products.

* 1 zone 09-36K Btu/h DC inverter.
* 2-5 zones 30CH to 60CH DC inverter multiple zone without branch boxes.
* 9 zones 90CH DC inverter multiple zone with branch boxes.
* VRF-heat pump with hyper heating 5F 100% –22F 80% heating capacity outputs
* VRF-heat recovery

Our products are of similar features and quality to our better known competitors on the market. We use Mitsubishi, Sanyo, and similar compressors and controls, butat better pricing. Our products have been widely specified or installed in residential, light commercial, institutional, hospitality and other applications across USA.

- Easy-to-Reach for Technical Support, Customer Services , Parts…
- 7 year compressor and 2 year other parts only warranty (Licensed HVAC technician’s good installation)
- Strong support, flexible, and easy to reach.
 
Company ID: 105535 - Click Here for Full Details
Product Lines:
Ours is a Commercial Finance Company Serving our Clients Financial Needs.

We are a Group of Specialists that Secure Funding for a Variety of Commercial Equipment for Small to Medium size Businesses. 
 
Target Markets:
Construction
Agriculture
Medical
Oil & Gas, etc. 
 
Sales Opportunity:
Our company provides our sales reps the tools and support to succeed. We provide a very competitive commission structure. Please submit a sales inquiry to us today!
 
Company ID: 105527 - Click Here for Full Details
Product Lines:
Ours is an ACM System that is Cut to Fit and Snaps Together On-site, Reducing Costs, Installation, and Lead Times. 
 
Target Markets:
Architects, Engineers, Design-Build, General Contractors, Installers. 
 
Sales Opportunity:
The system does not require prefabrication and can be installed on any type of structure. Our system differs from other ACM systems in that it is a tab-over system. The panels are secured by the snap-lock fasteners. Panels are not welded or formed during construction. This allows for each panel to expand and contract across a broad temperature spectrum without causing buckling or oil-canning.

The tab-over design is unique to our product, consisting of five different aluminum extruded profiles. The panel spacers and extrusions work together to create a pressure equalized rain screen system, allowing any moisture to exit. Installation is simple and allows the configuration to be tailored on site. No more waiting for prefabricated panels!
 
Company ID: 105525 - Click Here for Full Details
Product Lines:
Our Family of products Temporarily Covers Outlets, Switches, Wired Boxes, and Recessed Lighting Fixtures which Allows Professional Contractors to Provide Better Service, and Homeowners a Quick and Easy Method to Speed Up their Painting Preparation.

All Four of our Products are Patent Pending. 
 
Target Markets:
We are Targeting Big Box Stores that Sell Paint or Electrical Products, Paint or Electrical Contractors, Small as well as Large Hardware, Paint, Electrical Supply Stores, Website Outlets for Contractors. 
 
Sales Opportunity:
This is an opportunity to get started with a new product launch. Our temporary covers were very well received at a recent trade show in Vegas, and we have a number of distributors interested in carrying our family of products. We prefer to begin working with sales reps before signing up with distributers. This is a very low cost/high volume product that promises to generate an excellent profit.
 
Company ID: 105520 - Click Here for Full Details
Product Lines:
Textile/Upholstered Products.

Ours is a Design/Build Manufacturing Company in Upholstered Products Markets of Medical, Industrial, & Defense. We Align with Manufacturing Companies and Provide them with Goods Made to their Design Specs. Our Customers have a Need for High-Quality Semi-Custom Goods in Mid-Range Production 
 
Target Markets:
- Durable Medical Equipment (DME) Manufacturing
- Industrial Covers, Strapping
- Defense Contractors, Covers, Seat Cushioning, Strapping
- Aviation: Interior Rrestorations, Seat Upholstery, Jet Engine Covers

Targets would be large Mfg companies that don't want in-house upholstery due to complexities. 
 
Sales Opportunity:
Our company is seeking to establish long-term relationships with a manufacturing representative platform. Since we serve a diverse customer base it will be more cost effective to outsource the sales role to Manufacturer Reps that handle the specific markets versus hiring sales personnel from multiple markets. We are not afraid to reward driven reps with high commissions as we know this is a "pay to play" scenario.

We are over 40 years old, can provide great references from large prominent companies, and we plan to grow the company. We have significant capacity for growth and the current ownership comes from much larger market companies than competed globally. We would like to do the same. Submit a sales inquiry to us to discuss how your market knowledge and drive could fulfill the need we have.

Thank you
 
Company ID: 52917 - Click Here for Full Details
Product Lines:
The most Economical Timber Frame Homes on the Market Today.

Our Timber Homes are Manufactured from Lodgepole Pine. 90% of our Buildings are Custom Designed. Our Standard Timber Sizes are 8" x 8" or 10" x 10". All our Timbers come Prenumbered for Assembly, we call it our "Adult Lego Set". 
 
Target Markets:
Sales Reps to Set Up Protected Independent Building Material Dealers and Builders. We Supply all Training along with PPT Presentations for the Dealers and Builders to Present our Buildings to their Customers. 
 
Sales Opportunity:
Our Patented homes sell themselves. Our homes can be assembled by the home owner or by a builder. The shell of the home comes in a kit form, no cutting required. All the timbers are marked with a numbers and assembly instructions come with complete drawings. The timbers are manufactuered from dry Lodgepole Pine trees. No other timber home can beat our prices.
 
Company ID: 105513 - Click Here for Full Details
Product Lines:
Dry Erase Sheets and Calendars, Window Well Scenes, Golf, Space, and Wall Murals, Specialty Items. 
 
Target Markets:
Greeting Card Stores which Include Hallmark and American Greeting, Grocery Chains, Hardware Stores that include Ace, Do it Best and True Value. Office Supply Stores. 
 
Sales Opportunity:
We have unique and patented product lines that we sell to all major internet companies and would like to find a rep group that will bring us to the next level with retail placement.
 
Company ID: 105501 - Click Here for Full Details
Product Lines:
Roof Coatings, Deck Coatings Elastomeric Wall Coatings, Stain. 
 
Target Markets:
Distributors. 
 
Sales Opportunity:
10% commission. Great products. Literature, samples. Factory direct competitive prices. Can ship as little as one pallet or truckloads. We also can ship overseas.
 
Company ID: 105498 - Click Here for Full Details
Product Lines:
We Manufacture a Preventive Maintenance Device Used to Prevent the Build Up of Dust and Dirt on Ceiling Tiles that Surround 2'x2' Ceiling Vents.

The Device is Used in High Foot Traffic Facilities such as Restaurants, Hospitals, Airports, Convention Centers. Shopping Centers, Retailers, etc. 
 
Target Markets:
Maintenance Contractors, Maintence Suppliers, Acoustical Ceiling Suppliers, Acoustical Ceiling Tile Installers, HVAC Components Suppliers, Architectures, Facility Maintenance Managers. 
 
Sales Opportunity:
We are an established company with a proven product and sales record. We currently serve the United States and Canada. The product is made in the United States and we have an excellent distribution system.
 
Company ID: 105416 - Click Here for Full Details
Product Lines:
Our company is the National Distribution Partner of a Fencing Company.

Their Composite Products are Globally Recognized and our Company is Looking for Independent Sales Reps to Sell their Composite Fencing Product line. 
 
Target Markets:
Home Depot, Lowes, Builders FirstSource, ABC Supply, 84 Lumber Company, Other Lumber Yards, Building Material Suppliers, Construction Suppliers, Builders, Contractors, Landscapers, Fence Companies, Fencers, Fence Suppliers, Fence Contractors, Cities, and Liaison for Installation Projects. 
 
Sales Opportunity:
Sell the leading composite brand in the outdoor living industry. Its leading composite fence product gives sales reps the opportunity to sell materials through a special order distribution network of big box stores, building material suppliers, cities, and fence contractors/dealers.

Our company is an authorized vendor for the two big box stores along with several other established material building suppliers. Also there are thousands of companies in the fence industry for developing new business opportunities. Product training, sales support, and marketing program are provided to our sales reps to help with selling these composite fence systems.

Attractive commissions are available for selling these high-end composite fence systems. Commissions are based on a slide scale for the customer type.This composite fence brand has been proven with a 10-year plus history since its product launch. We're looking for eager sales reps to help with selling materials in targeted territories.
 
Company ID: 105413 - Click Here for Full Details
Product Lines:
Weatherization System - Weather Barriers, Flashings, and Tapes. 
 
Target Markets:
Two-Step Distributors. Primary Contact will be with the Distributor, Architects, and Builders. 
 
Sales Opportunity:
- Best in category weatherization system with a clear value distinction from its competition.
- All products are manufactured in the USA.
- Huge growth potential in the Southern Cal, Arizona, Utah, Nevada, and New Mexico markets.
- Current reps in other areas are long-term partners who make big $$. Good reps stay with us!
- Market experience with building materials background required.
 
Company ID: 49369 - Click Here for Full Details
Product Lines:
All Types of Disposable Shoe and Boot Covers (Polypropylene and Vinyl)
Black Nitrile Gloves (5 Mil Thick), 100 per Box, 10 Boxes per Case.
Surgical Towels (Sterile & Non-Sterile for Lint Free Cleaning.
Canvas Drop Cloths.
Carpet Protection Tape 
 
Target Markets:
Industrial Markets - Manufacturing
Food Prep Plants
HVAC Supply Stores and Distributors
Hardware and Paint Stores
Beauty Supply 
 
Sales Opportunity:
We have a new product on the market. These are our own brand of waterproof shoe covers in dark blue with textured soles. These are made of heavy duty vinyl. They are packaged 100 per dispenser box with 3 boxes per case. We are looking for go getter types to hit stores and distributors with this product. We offer rapid payment to our reps within 1 week of us receiving payment. Submit a sales inquiry if you think you can sell this product!
 
Company ID: 105401 - Click Here for Full Details
Product Lines:
Pole Line Hardware: Machine Bolts, Double Arming Bolts, Carriage Bolts, Line Post Stud, Drive Hooks, etc.
Insulators: Spool, Guy Strand, Suspension, Line Post, etc.
Cut Out: porcelain and silicone
Anchoring/Grounding: Expanding anchors, anchors rods, ground rods, ground rod clamps, etc. 
 
Target Markets:
Distributors (Utility)
Utility Organizations including IOU's
Planning/Engineering organizations for utilities 
 
Sales Opportunity:
Powerline Hardware is a true manufacturer selling into the utilities market focused on the distribution portion of the infrastructure. We have inventory warehoused ready for distribution and also have developed several stocking agents relationships. Frequently 'blanket orders' and bids won will last several years bringing in consistent revenue month after month.
 
Company ID: 105399 - Click Here for Full Details
Product Lines:
Our company manufactures evacuated tube solar-thermal collectors and frames and supplies associated systems components. Materials are for domestic hot water, radiant heating, and space heating systems, for residential, commercial and industrial applications. 
 
Target Markets:
Contractors & wholesalers in solar or plumbing, installing residential & commercial solar thermal/electric systems. Plumbing and construction wholesalers selling to contractors. Mechanical Engineering firms who purchase directly (or through General Contractors) for solar-thermal projects. 
 
Sales Opportunity:
The solar industry is growing at a rapid rate. Solar-thermal, as a sub-section, is product scarce. There are too few suppliers to meet growing demand, and we are practically the only evacuated tube product being sold. Also, solar-thermal has faster-growing incentives than PV. Major solar-thermal rebate programs are being rolled out in states across the Pacific Northwest, the Northeast, and the South.

On top of that there are already successful state rebate programs in California and Massachusetts that are getting renewed and expanded. In Southern California, the commercial solar-thermal rebate recently increased so that when combined with the federal incentives, all systems are entirely free. Likewise, the residential solar-thermal rebate just increased so that it covers 100% of a new system even before considering federal incentives.

The market is fertile and the supply is scarce. You can sell the much-need materials that fill the gap. As our rep you'll receive high quality support from an LA-based team, as you sell our collectors and frames, along with the other system components which we also have in stock at our 150,000 sqft warehouse in Los Angeles.

Our company is in the process of rolling out new products that work in conjunction with our solar-thermal collectors. You will have the opportunities to sell an expanded product line and higher price-tag products, in a growing market.
 
Company ID: 105395 - Click Here for Full Details
Product Lines:
Super High-End Handcrafted Windows
Tilt and Roll Patio Doors
Bi-Folding Doors
Sliding Doors 
 
Target Markets:
High-End Residential Projects
High-End Commercial Projects
Heritage Projects 
 
Sales Opportunity:
If you are interested to work with super high-end products and build relationship in the luxury market, we have just the products for you to succeed with. Submit a sales inquiry to us and let's start building your luxury market expertise!
 
Company ID: 105372 - Click Here for Full Details
Product Lines:
Specification Drainage Products. 
 
Target Markets:
Supply Houses. 
 
Sales Opportunity:
We are a new company with a complete line of Specification Drainage Products already developed and IAPMO approved. We are looking for some experienced manufacturers reps to carry and promote our products. We are looking for companies in all 50 states.
 
Company ID: 102729 - Click Here for Full Details
Product Lines:
Hand Tools including:
Steel Rulers
Try Square
Rafter Square
Bevel Square
Engineer Square
Depth Gauge
Degree Protractor 
 
Target Markets:
Reseller
Wholesalers
Distributors 
 
Sales Opportunity:
We are a manufacturer of hand tools in India. We want to expand the business into overseas countries. We need sales representative to find business leads and get sales for us. We will offer commission on sales.
 
Company ID: 105351 - Click Here for Full Details
Product Lines:
High End Sliding Doors and Interior Office Front Glass Wall Systems.

Our company is North America's Leading supplier of of Top Quality Sliding Door Systems for Healthcare and Corporate Office Environments. 
 
Target Markets:
Primary sales targets are Architects and Specifiers within Architectural/Design Firms. Primary sales method is Direct Sales Presentations and Group Lunch & Learn Type Presentations. Other sales targets are Glass Glazing and Door Installation Contractors as well as Large General Contractors. 
 
Sales Opportunity:
Looking for experienced, driven Architectural sales professionals to meet with architects and present and sell our unique products. We have experienced incredible market acceptance and year over year demand has grown 200 -300 year over year for the past 3+ years.

We are experiencing rapid continuing rapid growth and seek experienced sales professionals to help manage and continue this growth. Our product is highly suited to today's growing demand for space savings and efficiency in new facilities while offering the industries best performance in a sliding door. The product is unique. Has no direct spec competition and tends to sell itself once the customer has been made aware of the advantages.

Currently looking for representation in the following areas:
New York City, Boston, and Northeast Corridor
Florida
Texas
 
Company ID: 105252 - Click Here for Full Details
Product Lines:
Ours is the Heavy Duty Solution for Floor Drains that so Many Businesses and Organizations Desperately Need.

Distributors, and Retailers all are in Agreement on its Quality and its Position as the Leader in its Class. 
 
Target Markets:
Pest Control Suppliers, Over-seas Plumbing Wholesalers, Janitorial & Sanitation, Restaurant supply, Hospitality Supply. 
 
Sales Opportunity:
Our company holds a significant number of Patents in both the plumbing and water conservation sectors, making us one of the most innovative companies in the industry today. Our eco-friendly products have been designed to improve or replace existing, poorly designed technologies that waste energy or have harmful effects on the environment, for businesses, schools, industrial locations and more all across the nation.

Our innovation combined with our focus on sustainability has made us a go-to choice for many customers. We are seeking Reps & companies on a Manufacturing Buy-Sell format, if you feel you fit the opportunity we would love to talk to you. Please submit a sales inquiry to us today.
 
Company ID: 105346 - Click Here for Full Details
Product Lines:
A Virtually Unlimited Data Backup Solution with Local and Cloud Storage included.

It is 4"x4"x2" and Sits Next to their Network Switch. We Monitor and Maintain it from Our Facility. We Charge $69.00 per Month Currently. We have a One Time Setup Fee of Between $500.00-$1000.00. 
 
Target Markets:
Small Offices with 3-20 PCs/Servers. We can Provide Multiple Cubes for more PCs. 
 
Sales Opportunity:
We do not know of a more cost effective, peace of mind, data storage/backup solution. Also these can have additional customer controlled accounts for $20 per Month, that will allow them to gain access to their cloud synchronized data from anywhere.
 
Company ID: 104309 - Click Here for Full Details
Product Lines:
Custom Fiberglass Products
Antenna Enclosures for Telcom
Waste Water and Food Processing Equipment such as Weirs, Baffles, FRP Stairs, Platforms, and Railings
Architectural Products in FRP for Enhanced Durability
Trench Liners, Spill Containment, Load Rated Utility Opening Covers 
 
Target Markets:
Architects, Engineering Firms, Contractors, and OEM Accounts. 
 
Sales Opportunity:
Highly competitive and innovative small company capable of quick decisive decisions and superior sales backup. Bring us your difficult challenges. Quality solutions are our most important product. Submit a sales inquiry to us to pursue this opportunity or inquire as to additional company capability. Portland Composites excels at replacing traditional structures with Fiberglass based fabrications.
 
Company ID: 101823 - Click Here for Full Details
Product Lines:
Within the Texas market, Businesses Choose their own Electricity Provider. The Program allows you to Sell Electricity, and in the Next Few Years Additional Services including Security, Energy Management, Efficiency, and Alternative Energy Choices will be added. 
 
Target Markets:
The great thing about selling electricity is that every business in deregulated areas of Texas are your targets (with the exception of those operating out of their home). This is well suited to reps that have a customer base in the state of Texas. 
 
Sales Opportunity:
We are developing a Network of Independent Sales Representatives.

Typical Rep sells products for a different company and will be trained to sell our business offers as well. Program is perfect for companies with an existing sales force or individuals looking for supplemental income. Able to offer your prospects electricity along with other products you represent to create additional value at the point of sale and retentive value long term for your customers.

Represent a well-established industry leader
Create an Alternative Revenue Stream
Benefit from upfront payments and residual income up to 36 months
Increase Revenue per customer
Ability to sell 12 months prior to the end of their current contract in place
Unlimited earning potential
Ability to renew customers on future contracts
Helps Retain Sales Agents
Can sell to current customers
Simple 2 Contact Close Process
Sales Assistance and Support Provided

As a leader in the industry we are one of the largest electricity companies in the area with a strong brand name and excellent customer service. Plus this is first for the industry and provides reps an opportunity to get in on the ground floor of this program.
 
Company ID: 105321 - Click Here for Full Details
Product Lines:
All Sheet Metal Parts, Range Hoods, Metal Cabinets, Countertops, Signs, Electrical Boxes, Car Parts, Metal Brackets, Store Fixtures, Furniture. 
 
Target Markets:
Architects, Engineers, Contractors, Distributors, Designers, Military, Government Agencies, Retailers, Developers. 
 
Sales Opportunity:
We are an established precision sheet metal shop with a wide variety of skills and equipment. With engineering and innovative backgrounds our team is capable of designing and manufacturing a vast amount of products. From advanced sheet metal engineering, CNC plasma cutting, CNC bending to precision welding, cosmetic professionals as well as certified welders, no job is too big or too small for Fine Design Enterprises.

We have always taken care of our reps, without reps, we have no sales. Commission is negotiable depending on product/market. We are very flexible and easy to work with. Feel free to submit a sales inquiry to us to discuss any projects.
 
Company ID: 105318 - Click Here for Full Details
Product Lines:
Our product is a Patent Pending (Tool Less, Glue-Less) Fitting for Cabinet, Furniture, Case Goods Manufacturing. 
 
Target Markets:
Cabinet, Furniture, Case Goods Manufacturers. 
 
Sales Opportunity:
Our product replaces wood dowel, mini-fix, ra-fix and cam-lock construction methods. This product targets any wood panel product manufacturer using CNC routers to manufacturer their products. It provides manufacturers higher productivity, rock solid construction, flat pack, or full assembly at the manufacturing site. Ours is the "leanest" manufacturing process available maximizing your manufacturing options and while increasing your through put and profitability. Lastly, it's assembly is tool-less, thus anyone can assembly our manufactured product in seconds, or minutes depending on the product. Achieve your revenue goals with our company!
 
Company ID: 105307 - Click Here for Full Details
Product Lines:
Woodworking Hardware
Fasteners
Drawer Slides
Hinges 
 
Target Markets:
Cabinet Shops
Furniture Manfacturers 
 
Sales Opportunity:
Our products are a new fasteners, drawer slide and hinge that has unlimited potential. Our Next generation of Ultra Fast Assembly hardware helps customers reduce assembly and shipping cost by 80%. Headquartered in Fremont California we need people who are selling to the woodworking industry and have technical skills understanding the equipment used and the manufacturing process.
 
Company ID: 73805 - Click Here for Full Details
Product Lines:
A Sustainable Wood-Plastic Composite Used Primarily for Decking, Decorative Trims and Rain Screen Cladding.

This Unique Technology is Made of 90% Recycled Materials and is 100% Recyclable. 
 
Target Markets:
Architects, Commercial and Landscape. Contractors, One and Two Step Building Product. 
 
Sales Opportunity:
The technology is unique and has been very successful through promotion in the architectural channel. The decking category targets not only the specification channel, but also more traditional building product one and two step distribution. The successful representative must be familiar and comfortable presenting to the architect and understand specifications.

The technology is loved by the architect and addresses the need for a natural wood aesthetic and feel with NO maintenance. The diversified product family appeals to the commercial, residential and landscape architect. The cladding is a rain screen and the new 4G aluminum with wood plastic composite is unique and very popular. Show to 100 architects and 99 will have an interest in one of the three technologies.
 
Company ID: 105297 - Click Here for Full Details
Product Lines:
Our Products are an Ensemble of Extraordinary Decorative Glass Products Catering to High-End Interior Projects.

From an Array of Colors, Patterns, Finishes, and Graphics, we Allow for Infinite Possibilities with a Wide Assortment of Product Lines. 
 
Target Markets:
US Market open. we are Looking for a Professionals on the Architectural and Glass Business (from the West cost to the East cost), our Products are very Unique and Attractive to Architects, Glaziers, Contractors, and more. 
 
Sales Opportunity:
Great product, great company reputation in the market. Unique capabilities from flat to curved glass, from small to large. These products can be used on Commercial, Residential, Hospitals, any kind of building. On walls, doors, partitions, flooring, stairs, handrails, desks, elevators, wall art.

As our parent company, we have concentrated our efforts for more than 30 years on improving the technologies and services that make signature designs come to life.

Founded with an entrepreneurial vision in 1979, they developed its activity around the special glass needs of the architectural market. A commitment to the industry, the community, and the world of design, inspired them to develop multiple technologies to engineer and manufacture special glass products.

The different technologies they have developed have been used to satisfy very special needs for the architectural glass world by offering high end products at attainable prices, ensuring the company carries on healthy business practices with constant reinvestment, and a continued growth path. Thanks to the preference of many customers through the years, in 2010 we expanded our capabilities to a second facility located in Houston, TX. Regardless of the size of the project, we are now able to deliver high quality glass products in a timely- efficient manner from two of North Americas most modern and technologically advanced glass fabricating facilities.
 
Company ID: 105295 - Click Here for Full Details
Product Lines:
Hydraulic, Pneumatic and Electric Torque Wrenches. 
 
Target Markets:
Oil & Gas, Power Plants, Manufacturing, Construction. Any market that has bolting involved 
 
Sales Opportunity:
Looking for (2) Area Sales Managers.
1. To cover the greater St. Louis area and Southern IL (South of Peoria)
2. To cover Southeastern Missouri

Our company Makes Industrial Bolting Safer and Simpler. With over 40 years of experience focused entirely on industrial torque and
tension systems, ours is the most trusted name in the industry. From steel mills and mining equipment to refineries, nuclear power plants, and wind turbines; we have developed solutions for nearly every bolting application
 
Company ID: 105047 - Click Here for Full Details
Product Lines:
Ours is a Technology Based Company which Allows Buyers to Purchase Residential and Commercial Home Improvement Products Bundled with Trusted Factory Certified Service Professionals.

"Buyers Push a Button and get it Installed" 
 
Target Markets:
Home Improvement Manufactures, Home Improvement Online Retailers, Home Improvement Wholesalers. 
 
Sales Opportunity:
We would like to partner with Reps in the Home improvement space and provide reps with an attractive payment structure to sell/bundle installation services with products. Our company is a market leader in the home installation field and we are looking for great reps to partner with us.
 
Company ID: 54220 - Click Here for Full Details
Product Lines:
Standard & Custom Size Diamond Shape Interlocking Shingles for Roofing & Wall Cladding.

Custom design, Interlocking Shingles. Custom shingles for Turrets, Domes or other 3D Shapes. Quadro Panels. Pressed 3D Ornate Wall Cladding Tiles. Standing Seam System. All Accessories Engineered In-House. 
 
Target Markets:
Our interest is to Promote the Different Roofing and Wall Cladding Systems we Manufacture to Architects and Design Firms of Mid and High-End Private and Commercial Projects, and/or Promote to Homeowners, Developers and Contractors. 
 
Sales Opportunity:
Our company is expanding and hiring (worldwide locations) marketing and sales individuals or companies with interest and capabilities to represent our world class product line with the support of our exceptional metal building envelope knowledge, offering the longest available warranties in the industry.

We provide material, installation and system knowledge for the sales professionals and world class, hands-on training for selected installing contractors if required. We expect self guided and motivated marketing and sales help. Compensation is based on commission per project sold.
 
Company ID: 105263 - Click Here for Full Details
Product Lines:
Used in the Landscape Lawn Care Equipment Industry.

This Product Relates to the Handling of Grass Clippings and other Lawn Debris. 
 
Target Markets:
The Rep will initially Sell Directly to the End-User because they will understand the need. Initially Dealers and Distributors will be Hard to Convince there is a Need until Customers Make it Apparent. 
 
Sales Opportunity:
This is a new product with very limited sales to date but the test market in a remote county in central Nebraska in a town of 6,000 there have been 6 sales to end-users with continued inquiries (unsaturated). The retail prices of the unit is in the $6,500.00 range. There have also been sales across the U.S. from Massachusetts to Idaho and also Europe.

The need for this product has been mostly ignored to this point but with our aging population and the need to handle lawn waste, the market is growing and destined to grow as time goes on. Getting totally new products into these markets is challenging as can be demonstrated by the fact that the ZTR mower was Patented in 1963 and went almost undetected for thirty years before every mower manufacturer finally decided they needed it.

End-users have reported time savings of up to one hundred percent with this system over their previous methods. One small business reported an increase in receipts of 60% they attributed to using this system alone. Reports from the field are extremely encouraging. Using sales based on the sales from the target market as a baseline the total provable sales would be 1 in 1,000 which would mean U.S. sales could be 350,000 or more.
 
Company ID: 105253 - Click Here for Full Details
Product Lines:
Custom and Semi-Custom, Decorative Coffered Ceiling Systems. 
 
Target Markets:
Developers, Builders, Contractors, Interior Designers, Homeowners. 
 
Sales Opportunity:
New and innovative patent protected products unlike anything available in the marketplace offering you a unique opportunity to help your customers differentiate themselves in a competitive marketplace.
 
Company ID: 105236 - Click Here for Full Details
Product Lines:
Black Nitrile Gloves, Orange Nitrile Gloves, Green Nitrile Gloves. 
 
Target Markets:
Mine Suppliers, Mine Supply Distriburtors. 
 
Sales Opportunity:
Our company offers dependable products and service since 1980. Offer your customers the most popular disposable Glove Brands: Grip Gloves, Grip Gloves, Grip Gloves, Grease Gloves. We offer raised texture surface gloves, micro texture gloves, powder free for unmatched grip. Our nitrile formula features extreme durability and wear strengths while offering best dexterity and flexibility in disposable gloves. Commissions terms are 7.5%. All products are centrally warehoused and shipped nationally from our Ohio facilities.
 
Company ID: 105234 - Click Here for Full Details
Product Lines:
We Distribute over 130 Brands of Door Hardware.

Key Categories are: Locks, Door Closers, Exit Devices, Electric Hinges, Padlocks, Lockdown Products, Detention Locks, Cylinders, Cores, Keys, and Locksmith Supplies. 
 
Target Markets:
Our target market is Hospitals and Colleges in Boston, MA 
 
Sales Opportunity:
Our wide and deep line of products will be used by everyone you meet! Product shipping and support comes from our office in Northvale, NJ and from our manufacturers. We are a 60 year old company with a staff of expert locksmiths to assist clients in choosing the right hardware for their facility. This is a great product line to complement the current relationships you have and to open new doors!
 
Company ID: 68742 - Click Here for Full Details
Product Lines:
Large Diameter Bearing Repair & Custom Manufacturing up to 11 feet in diameter. 
 
Target Markets:
Heavy Construction Equipment Manufacturers, Rebuilders, Rental Companies, Cranes, Excavators, etc. Industrial applications including many types of Large Rotating Equipment. Steel Mills, Paper Mills, Bottling, Marine. Gearbox Repair. Oilfield Drilling Companies, and OEMs. Oilfield Equipment Repair Companies. 
 
Sales Opportunity:
We are a new company with extensive expertise in manufacturing and repairing large diameter ball and roller bearings up to 11 feet in diameter. One of only a handful of companies in the world can provide the type of service that we offer. Truly a niche industry with high value products. We have one of the largest diameter manufacturing capacities in North America. Our services typically save our customers about 50% of buying new so new prospects are very happy when they discover our services.
 
Company ID: 37618 - Click Here for Full Details
Product Lines:
We are ready to launch our new 5000 BTU Air conditioner designed to eliminate idling for over the road trucks. Our system includes an easy to install battery box to power the system for 7-12 hours. This system compliments our other DC powered air conditioners that include 12, 24, 48 and 72 VDC. 
 
Target Markets:
Our primary markets are truck fleets and owner operators to eliminate costly idling and in many states idling is not allowed. Secondary markets include material handling, golf carts and electric vehicles. 
 
Sales Opportunity:
We have an opprtunity for an experienced sales representative in the trucking industry to promote a product that is mandated by law in many states. Our product eliminates costly idling during mandatory rest periods and emmission. We are EPA SmartWays approved. As electric vehicles increase in popularity our DC powered air conditioners are necessary to maintain driver comfort. We will support our representatives with literature, technical support and advertising.
 
Company ID: 105200 - Click Here for Full Details
Product Lines:
Component, Drawer Sides, Birch, Painting, UV Top Coated, Furniture Parts, Slotwall, Shelving, Store Fixtures, OEM Parts, HPL, LPL, Vinyl, FRP, Scaffolding Pads, RV Floors, Bus Floors, Pontoon Boat Floors, Scarfing, Core Plugs, Architectural Panel, POP Display, Signs, Toy Games, assembly, and Pack Out. 
 
Target Markets:
OEM, Distributors, Cabinet Manufactures, Commercial Casework, Window Manufactures, Furniture Manufactures, Store Fixture Manufactures, Toy Games, Children. 
 
Sales Opportunity:
Highly diversified product lines across multiple industries allows for steady sales. Can mass produce parts to meet any demand. Family owned and operated for 64 years. We are located in the heart of the great Pacific Northwest timber country between Seattle and Tacoma, Washington. Our company is ideally located to ship via rail car, piggyback, container, and flatbed. We are located near the forth largest container port in North America, served by every major trucking line, two railroads (Burlington Northern and Union Pacific), two interstate highways, and by Seattle-Tacoma International Airpot. Negotiable commission structure.
 
Company ID: 105174 - Click Here for Full Details
Product Lines:
Our Company Provides an After Hour Product Pick-Up Lock Box System.

The Sales Rep or Counter Manager Places the Product into the Locker and Programs the Lock with the Customer PO#. The Customer Shows Up and Enters the PO# and Retrieves the Product. 
 
Target Markets:
Electrical, Plumbing, HVAC, Industrial Distributors, Beauty and Barber Distributorships, Parts Distributors, Paint Stores. Any Sales Office that Provides Product to an Industry that Caters to Contractors, Installers, Maintenance Departments, Beauticians/Barbers that Need Supplies. 
 
Sales Opportunity:
New unique way to for any sales organization to make their product available at the convenience of the customer. Our company rents or sells the lock box system. Rental is below $100 per unit. I've also developed a plan that will help off set the expense of the system by selling advertising on the the three doors of the lock box.

The sales rep will need to work with the distributor to get there vendors to spend co-op dollars to promote new items, sales promotion, new product launches, etc. We have floor prices and anything over the floor is ALL yours. We do all the printing for the advertising. You place the ads on the locker doors. Each advertising period runs for 3 months.
 
Company ID: 105162 - Click Here for Full Details
Product Lines:
Specialized Tax Incentives, Cost Reduction Services, Property Tax Reduction, and a whole Host of Financial Services all on a Contingency Basis of Not Charging the Client Unless we Actually Save them Money. 
 
Target Markets:
Virtually any Company will find Benefit, but Manufacturing, Commercial Real Estate, Auto Dealerships, Hotels, Funeral Homes, Golf Courses, Medical Facilities, Internet Stores, CPA's, and Restaurants are among the most Lucrative. 
 
Sales Opportunity:
This is the easiest and quickest way you will ever find to earn big money from your existing clients and in addition is a great way to add new clients to your existing business as well. Nothing gets you in the door of a company as well as offering them savings that do not cost anything up front. We are strictly contingency based and never charge for our services's unless we find them savings.

You can easily add 6 figures plus in commissions to your existing money without adding much more time to your calls. The commissions vary depending on the product but they all are very lucrative and based on the insurance commission model. You will always be paid directly from the company that provides the service to your client. Submit a sales inquiry to me for a short video that will invite you to a webinar where you will be able to get your questions answered.

You will never need to be an expert in any of these products. You will simply run the APP to find what areas your client qualify's for, and then introduce the appropriate products to your client and schedule a discovery call with them and the expert who will be your support and closer. It is really that simple. Any independent B2B Rep, from most any business, will find this to be a great addition to their business often times doubling their income. You owe it to yourself to check this out! Please submit a sales inquiry to me ASAP.
 
Company ID: 105163 - Click Here for Full Details
Product Lines:
Consumer Products:
- Home & Garden
- Kitchen, Food Preparation
- Specialty "Niche" Market
- Automotive 
 
Target Markets:
US & Global
- Top 100 Retail Chains
- Specialty Retailers, etc. 
 
Sales Opportunity:
We are family owned global consumer products company with 30 plus years industry experience. Our success with clients and staff is based on core values generosity, honesty, integrity and always making things right.

Our current need to secure new talent in this area is based on the need for more aggressive, out of the box thinking individuals who have a dive to be part of a not only a successful business but to become part of a family. No corporate red tape, micromanagement etc., work hard do all that you can and the rewards are very generous.

A HUGE benefit, you will be “representing” /”selling” products that all ready have a proven sales history among consumers, branded etc. We need trained sales professional with relationships with the buyers and decision makes to make the deals and get things to happen.
 
Company ID: 104026 - Click Here for Full Details
Product Lines:
Plastic Injection Molding, Rubber Injection Molding and Insert Molding. 
 
Target Markets:
Industrial, Commercial, Automotive. Tier 1 and Tier 2. OEM's. 
 
Sales Opportunity:
I have worked for small organizations, medium organizations and even a fortune 50 company. These experiences have shown me some of the best ways to run a business, make quality products, and focus on customer satisfaction. My experiences have also taught me the cost structures of my competitors, and how to keep the overhead of my organization in line, which will allow us to be extremely competetive.

I am starting from scratch and will be purchasing my machines specific for the jobs that you bring in. My ideal tonnage range is between 30 tons and 400 tons.
 
Company ID: 105137 - Click Here for Full Details
Product Lines:
Our company Makes Wall and Ceiling Panels and Class A Rated Faux Leather Tiles.

Our Wall Panels are a High Quality Solid Product made out of MDF (Medium Density Fiberboard), a Hardwood Composite of mostly Organic Materials that are CARB Phase 2 Compliant of No Added Formaldehyde. 
 
Target Markets:
Stone, Tile, and Floor Retailers, Designers, Architects and Developers. 
 
Sales Opportunity:
Textured Wall Panels are becoming the hottest trend in the market today, and we offer a extraordinary designs, large selection and ridiculously low prices. If you are looking to expand your product offering and diversify into this new and exciting category of 3D Walls and Ceiling panels, we would like to hear from you.
 
Company ID: 105133 - Click Here for Full Details
Product Lines:
Vinyl New Construction and Replacement Windows and Sliding Patio Doors. 
 
Target Markets:
Lumber Yards, Millwork Distributors, Roofing and Siding Distributors, and other Building Products Distributors. Also looking for increased exposure in the Manufactured Housing industry. 
 
Sales Opportunity:
60+ Year Old Window and Door Manufacturer looking for aggressive reps wanting to grow their business or are looking for additional lines to sell. Proven products, industry standard delivery and service, and aggressive pricing offer company and reps the opportunity to grow their respective businesses. Territories are negotiable. Company offers industry standard commission rates.
 
Company ID: 99107 - Click Here for Full Details
Product Lines:
Plywood, Baltic Birch Plywood, Panneling. 
 
Target Markets:
Architects, Builder, Contractors, Homeowners. 
 
Sales Opportunity:
We are opening another product line of imported high quality Baltic Birch Plywood. We are looking for steady sales channels and partners to develop sales in this category. Our product is top quality on the market. Our clients are builders, floor manufacturers, furniture and cabinet making companies and many others. We are looking for proactive sales reps, that will handle our sales part. Give us a note if you have customers or opportunities that you can move on with.
 
Company ID: 105124 - Click Here for Full Details
Product Lines:
Complete CNG Hardware Systems for CNG Stations: Compressors, Dispensers, Storage Tanks, Dryers, Control Systems, and Priority Panels. 
 
Target Markets:
CNG Fueling Station Providers - Owners, GC's, CNG Firms, etc.
Retail: Flying J, Loves, CNG4America
Private: Fed-Ex, UPS, Swift, Frito-Lay, AT&T, etc.
Municipal: Cities & States for their own Fleets (Buses, Garbage Trucks, Police Cars, Airport Vehicles) as well as Serving the General Public. 
 
Sales Opportunity:
Our company is the exclusive representative and packager of CNG compression systems across the North American NGV market. Aspro has been manufacturing high performance CNG-specific compressors for over 30 years. Deployments span the globe with over 4,500 CNG Fueling Systems operating in 38 countries.

We have partnered with another company to provide US-based design, engineering, and packaging of compressors, dispensers, and control systems to offer a complete CNG hardware solution for a wide range of unique customer demands. We have the products, expertise, and flexibility to meet our customer's CNG fueling requirements.
 
Company ID: 95320 - Click Here for Full Details
Product Lines:
Contract Furniture, Workbench Tops, Tables Tops, and Complete Tables. 
 
Target Markets:
Industrial, Commercial, Restaurant, Retail, Hospitality, Healthcare, and Educational Markets. 
 
Sales Opportunity:
We are a New England based contract manufacturer of wood and high pressure laminated furniture, is expanding its commission based independent manufacturer representative network throughout the US and Canada. For over four decades Maple Wood has provided the highest quality contract furniture at competitive prices with dependable on-time delivery to company throughout the US.

Our products, which range from industrial work tops to restaurant table tops and complete tables to a complete line of contract furniture, feature quality New England craftsmanship, and are aesthetically pleasing as well as highly functional. We are looking for reps to sell our products into the industrial, commercial, restaurant, retail, hospitality, healthcare, and educational markets.
 
Company ID: 105119 - Click Here for Full Details
Product Lines:
Storage Systems, Pallet Racking; Picking Shelves, Cantilever Shelves, Platforms, Dynamics Shelves, Kits, Aluminum Ladders, Profesional Ladders, Industrial Ladders, Domestic Ladders, Multi-Purpose Ladders, Multi-Fuction Ladders. 
 
Target Markets:
G.C.C
Saudi Arabia
Egypt
Ghana
Guinea
Congo
Nigeria
France 
 
Sales Opportunity:
We are manufacturers with large production capacity. We have a wide range of products Storage systems and Aluminum ladders.
 
Company ID: 39644 - Click Here for Full Details
Product Lines:
Custom Shredding and Material Processing Equipment for Tires, Plastic, Wood, and Computer Recycling Industries.

Patented Commercial Duty Hydraulic Loading System for Pickup Trucks and Cab Chassis Trucks. Contract Manufacturing and Engineering. Full Service Metal Fab and Machine Shop. 
 
Target Markets:
Businesses looking to Upgrade with New High Efficient Processing Equipment. Truck Dealer, Outfitters, Landscape Companies, Construction Companies, Delivery and Service Companies that use Pickup Trucks in their Fleet. Other Manufacturers looking to Outsource Metal Fabrication and Machining. 
 
Sales Opportunity:
The recycling industry has been growing 5% per year for the last ten years and now due to government grants and mandates there are many new companies entering this market. We offer a commission based payment program typically 10 to 12% of the total sale. Average for one piece of equipment is $135,000. This is a great opportunity to get become a rep for a company with new ideas and will bring this industry into the 21st century.
 
Company ID: 105062 - Click Here for Full Details
Product Lines:
Hardwood Component Parts
Edge-Glued Panels
Drawer Fronts, Raised Panels
Hardwood Mouldings, S4S 
 
Target Markets:
Kitchen Cabinets and Furniture Manufacturers. 
 
Sales Opportunity:
We are a mid-sized hardwood component manufacturing company looking to expand into new and existing markets. We have a state of the art optimizing rip and chop line providing excellent lead times for our customers. We take pride in producing quality components at competitive price levels.
 
Company ID: 105060 - Click Here for Full Details
Product Lines:
Oil Pumps, Reels, Handles, Fuel Nozzles, Meters, DEF Equipment, Grease Equipment.

All Lubrication and Fueling Equipment. 
 
Target Markets:
Distributors who Sell to Oil companies, Dealerships, Fueling Companies, etc. 
 
Sales Opportunity:
We have extraordinary quality equipment manufactured in Italy and sells at the most competitive prices on the market. We have a large range and variety of all equipment needed for lubrication, greasing, fueling, etc. the major end users are oil companies, agricultural, fleet maintenance facilities and also municipalities.

Our parent company was founded 53 years ago today which gives us more than 50 years of know how in the industry. Our leading position in the Brazilian domestic market presently is working with more than 75% of the South American market. Lupus is renowned for our experience in supplying lubrication equipment throughout the Americas. Its product portfolio includes a large variety of equipment, hoses, reels and control systems.

Our company brings all the experience and knowledge of 53 years to the rest of the world. Headquartered in South Miami, with manufacturing facilities in Italy, we have a large inventory with a complete line of products to offer our customers with the best solutions in fluid handling (Diesel, biodiesel, Gasoline, Kerosene, Water, Grease, Oil, Chemical and DEF).
 
Company ID: 105058 - Click Here for Full Details
Product Lines:
We Specialize in High Production CNC Machining with a Focus on but not restricted to Manifolds.

The "Product to Sell" would be our Machine Capability Applied to any Potential Work. 
 
Target Markets:
Mobile Hydraulics
Agriculture
Construction 
 
Sales Opportunity:
Our company began 27 years ago using a sale rep and we are now looking to create more customer diversity. This strategy is to build a more reliable sales structure allowing us to go from 15m to 20m in the next two years. Feel free to submit a sales inquiry to me for more details and whatever else is needed to provide enough clarity for us to team up and do business.
 
Company ID: 105034 - Click Here for Full Details
Product Lines:
Construction Supplies: Concrete & Contractor Tools.

Everything from Diamond Blades to Light Towers. Compressors, Log-Splitters, #1 Brand Name Shovels, #1 Brand of Masonry/Concrete Hand Tools, Concrete Chemicals, Generators, Compaction Eq from Plates to Rollers, Heaters, Pressure Washers, etc. 
 
Target Markets:
Rental Dealers & Construction Supply Houses. 
 
Sales Opportunity:
We are looking for a Self-Motivated Sales Rep for a strong manufacturers sales agency in the New York City/North Jersey area. If you can bring a hands-on creative sales approach to service-existing dealers and establishing new accounts in the construction supply industry, then contact us immediately.

You bring the drive; we'll bring the opportunities. We are primarily equipment reps, so you must have the ability to acquire the basic technical knowledge of equipment through hands on experience, product literature and mastery of sales programs.

Responsibilities also Include:
• Exceed sales goals by prospecting and selling construction equipment to existing
• Rental & Construction Supply accounts.
• Effectively communicate with all decision-makers, gatekeepers and influencers ranging from senior management and purchasing agents.
• Must own reliable car and computer.

The Ideal Candidate will Possess:
• 4-year college degree
• Professional presence with highly developed phone, written and interpersonal presentation skills.
• The Ability to interact and communicate persuasively in pressured sales environment.
• Applicant must possess strong organization skills.
• Enjoy being part of a team, but willing to take a leadership position and make independent decisions as needed
• Qualified candidates only:

* Strong Base Commission with Immediate Growth Potential
 
Company ID: 104551 - Click Here for Full Details
Product Lines:
Ultra-Slim LED Luminaires, Troffers, Tile Lights, and Recessed Can Retrofits.

Residential and Commercial Light Fixtures including LED Panels and High Bay Replacements. 
 
Target Markets:
Lowes and South East Region Lighting Distributors both Commercial and Residential. 
 
Sales Opportunity:
Looking for independent sales rep to call on Lowes (Charlotte) and other opportunities in the South East (excluding The Home Depot and THD-related companies).
 
Company ID: 105018 - Click Here for Full Details
Product Lines:
- Pressure Sensitive Labels
- Laser/Inkjet Label Sheets
- Thermal Label Rolls
- Pinfeed Labels, EDP Labels
- Shipping Labels
- Integrated Labels & Forms
- Custom Printed Labels
- Parking Tickets and Receipts
- Tickets and Tags
- ATM Receipt Rolls
- Automotive Cardstock Floor Mats 
 
Target Markets:
- Office Businesses
- Manufacturing Plants
- Commercial Offices
- Healthcare Industries
- Food & Beverage Industries
- Warehouses
- Retail Chains
- Restaurants
- Automotive Industries
- Auto Dealerships
- Logistic Companies 
 
Sales Opportunity:
We are not just another label manufacturer, we have a highly Solution Oriented team and we can figure out the answers and solutions others cannot. As Canada’s Leading Label & Custom Finishing Manufacturer, we are dedicated to achieving manufacturing excellence for over 30 years. We have established a solid foundation in the industry by engineering and manufacturing all of our machinery, printing presses, and rotary dies in house.

Our acquired knowledge enable us to manufacture highly complex label products and solutions. Labels can be sold to all industries and all business, everywhere require label for many different purposes. If you would like exposure across all industries, you will enjoy selling labels!
 
Company ID: 65815 - Click Here for Full Details
Product Lines:
Custom Manufactured Electrical Control Panels, PLC Control Panels, Modified Motor Control Centers, Operator Touch Screen Terminals, 19" Rack Assemblies, VFD Panels, Annunciator Panels, and Instrument Gauge Boards.

UL Labeling on Entire Control Panel Assembly. Manufactured for all NEMA Environments. 
 
Target Markets:
Customers are End-Users or OEMs. Markets include Food Processing, Pumps, Mixers, Conveying, Mills, Packaging Equipment, Conveying, Furnaces, Kilns, HVAC, and Electric Utility. Projects are New and Upgrade/Retrofit. Special Applications of Vision Inspection and Collaborative Robots (Non-Guarded). 
 
Sales Opportunity:
Our company has over 45 years experience serving the industrial market with custom manufacturing services including design, UL Certified panel manufacturing, PLC programming, testing, and commissioning assistance. We are Certified to provide UL508a labeling for general industrial panels, UL698a for intrinsic safety barrier panels, and UL1203 for purge/pressurized, and other hazardous duty panels.

Control Panels are NEC Article 409 compliant. Quality, competitive pricing and on-time delivery are the core values we provide to our clients. We pay attention to the little details that make the difference of having a good project and a great project. We can "build to spec" or provide design-build services.
 
Company ID: 104995 - Click Here for Full Details
Product Lines:
Our Company Manufactures Fine Casegoods and Upholstery for the Hospitality Market.

The Majority of our Projects are Custom Built Furniture that is Hotel Specific. 
 
Target Markets:
Our target market includes any 3 to 5 Star Hotels. Our Customers include Hospitality Purchasing Agents, Individual Hotel Owners, Hotel Froups, Hotel General Managers, Design Architecture, and Interior Design Firms. 
 
Sales Opportunity:
We are seeking a qualified and experienced sales rep for the South East region of the US. Ideally located in Miami or Atlanta. We offer exceptional commission rates to our sales reps. Our experienced sales reps earn well over $200K per year. With all of our custom furniture projects, we offer highly competitive pricing, best in class warranty, top quality furniture, fastest time to market with both overseas and North American manufacturing facilities. All of these make our quotes stand out from the competition.
 
Company ID: 104982 - Click Here for Full Details
Product Lines:
Toilet Partitions: Solid Phenolic, Plastic Laminate, Uniquely Customized (Sizes, Graphic, and more).

Other Solid Phenolic Products (Countertops, Locker Room Benches, Tables, Interior Wall Protection, Shelves, Vanities, and more). 
 
Target Markets:
Representing the Products to Architects, Designers, and Opening Distributors Account (Division 10). 
 
Sales Opportunity:
We are a growing solid phenolic toilet partition manufacturer since 1998 and in the division 10 business for more than 40 years. We have done many notorious projects across North America. We keep improving our products, with high quality standards that surpass the market, and innovate to introduce new products to our manufacture line. We are a reliable and supportive company that believe in mutual partnership.

We actually cover Canada and 12 states. We are looking for reps to grow with us as we will be expanding our geographic coverage. Expansion territories: New York, New Jersey, Pennsylvania, Delaware, Maryland, Washington D.C., and Virginia. **Other territories might be open for expansion, please submit a sales inquiry to us for further details.
 
Company ID: 88355 - Click Here for Full Details
Product Lines:
1) Coated Abrasives.
2) Hook and Loop Pressure Sensitive Tapes and Die-Cuts.
3) Abrasive Discs, Abrasive Wheels, Sheets, and Rolls.
4) R & S - Type Quick Change Sanding Discs.
5) Polishing and Finishing Discs, Sheets, Pads, and Accessories. 
 
Target Markets:
1) Industrial Distributors, Automotive Distributors, and Large OEM's.
2) OEM's with Special Technical Requirements or Needing Private Label Brand Name Abrasive Products.
3) Metal Fabricating, Foundries, Welding Shops, Automotive Repair and Body Shops, Woodworking, Floor Sanding, and Polishing. 
 
Sales Opportunity:
Looking for Reps and Distributors in US Southeast.

In business 31 years, a Canadian Manufacturer and Converter of Abrasives,Hook and Loop and Velcro products. All products are manufactured with top quality raw materials sourced world-wide for latest technologies. Major suppliers of R-Type and S-Type quick-change sanding discs. We also manufacture quality sanding pads at competitive prices. We manufacture for leading brand-names, including our own brand. Well known for innovation, quality and support.

For US customers all shipments are at minimum cost from our New York warehouse. Current product listings and specifications on our website with recent catalogs in digital format. We export extensively to some of Europe's largest industrial and automotive distributors who count on us for superior performance products that meet their very high standards for quality and technical support.

Our motto is high quality at fair prices with excellent customer service and experienced, knowledgeable technical support. Most products are in stock or available on short lead times. Our standard commission structure is 10% for product manufactured by us (85% of our business) and 7% for products purchased from other manufacturers. May be limited to 5% on some discounted or clearance items. All negotiable.

We are seeking strong, professional sales representation that will understand customer requirements and deliver the best abrasive solutions. Please submit a sales inquiry if you're qualified.
 
Company ID: 104974 - Click Here for Full Details
Product Lines:
Red Stucco Tape
Masking Tapes
Painter’s Tape 
 
Target Markets:
Construction Warehouses
Plastering Supply Stores
Building Supply Stores
Distributors
Retailers
Construction
Big Box Stores 
 
Sales Opportunity:
Our company has over 50 years of experience, headquarters and plant in Mexico, so very competitive prices and consistent quality products. We do manufacture adhesive tapes, we are very strong in masking tapes, double side tapes, protective films, and Stucco tapes.

We have National industrial distributors. We have a new line of Polyethylene tapes for the construction industry, specially used for masking during pool plastering, stucco, plastic sheeting seaming, and under slab splicing. We are looking for motivated sale reps with deep knowledge of the market and customers to grow together in this new endeavor. All sales territories available throughout the USA. Company will provide samples and literature.
 
Company ID: 104949 - Click Here for Full Details
Product Lines:
Construction Products. 
 
Target Markets:
Residential and Commercial Construction Projects. 
 
Sales Opportunity:
We are a General Contractor with a team of highly motivated salesmen eager to get new products for the construction market here in San Jose, California to sell.
 
Company ID: 104944 - Click Here for Full Details
Product Lines:
Quartz and Granite Countertops and Vanity Tops, Kitchen, and Bathroom Cabinets. 
 
Target Markets:
Architect, Designer, Developer, Owner, Hotel Chain, Hotel/Motel, Management Company, Purchasing Companies. 
 
Sales Opportunity:
Established Company (Est.1993) in the Hospitality Industry looking for established Hospitality Reps looking to add a great line. Currently looking for TX, CA, & IL reps but may consider other states. FL & GA reps already filled. Currently selling nationwide from our In-House Sales team..
 
Company ID: 104935 - Click Here for Full Details
Product Lines:
Full line of Zinc Die-Cast, Steel and Malleable Iron Fittings - EMT, Flex, Ground, Liquid, MC, NM, Rigid, And Service.

Air Conditioner Disconnects, Weatherproof Boxes. 
 
Target Markets:
Electrical, HVAC, Industrial, and Construction Distributors; OEMs. 
 
Sales Opportunity:
Ours is a 60-year old supplier. We are continuously innovating and expanding our lines; and offer first-class customer service, delivery, support and commission levels.
 
Company ID: 104719 - Click Here for Full Details
Product Lines:
Aftermarket Auto Parts, Cooling System Auto Parts, Pulleys, Water Outlets, and Tensioners. 
 
Target Markets:
Wholesalers
Buyer Groups
Jobbers
Auto Parts Stores 
 
Sales Opportunity:
The change starts now with us. We are looking for people with vision to create wealth offering the highest quality at a competitive price to our costumers. We have a very wide and complete line of Pulleys, Water Outlets and Tensioners. We have high quality products with a 2 Year or 25,000 Mile Warranty on each of our products. We are leaders on the Cooling System Industry in Mexico. We do private labeling to recognized companies. 3 Year winner of the "Vendor of the Year" award, by AutoZone Mexico. We offer a 6% Commission.
 
Company ID: 104896 - Click Here for Full Details
Product Lines:
High-End, Oil Finished, Engineered, Wide-Plank, 7' Board Length Prefinished Hardwood Floors. 
 
Target Markets:
Commercial Specs and Retail. 
 
Sales Opportunity:
Commission is 6.5% of total sales. Looking for an independent agent who has high-end customers or experienced in getting projects spec'd commercially. Product stocked in Southeast. We are based in FL and looking for you to grow the Carolinas.
 
Company ID: 104893 - Click Here for Full Details
Product Lines:
Our Diesel Fuel Treatment Prevents Forced Regeneration in Diesel Engines
Calcium Sulfonate Grease
Big Rig Engine treatment, transmission treatment, differential treatment, Hydraulic system treatment, Calcium Sulfonate Spray Grease, Penetrating Lube. 
 
Target Markets:
Heavy Duty Industry
Kenworth
Peretbilt
Freightliner
International
Mack/Volvo 
 
Sales Opportunity:
We are currently stocked in over 50 locations throughout the United States! The Agencies we are currently working with are experiencing great results with consistent commissions and turns. Nobody esle in the industry makes a diesel fuel treatment that actually incinerates black carbon and soot before it gets to the DPF and sensors down stream. Our product sells itself we just need local representation to manage the accounts.
 
Company ID: 104889 - Click Here for Full Details
Product Lines:
Pine Finger Jointed Wood Mouldings
Raw and Primer (Gesso Free) Finishes
Standard WM Profiles and Custom Profiles (2' to 5'-1/4" wide) 
 
Target Markets:
Wood Moulding Distributors, Retailers, Producers, Door Manufacturers. 
 
Sales Opportunity:
We are expanding our plant and business in USA and we are looking for reps with great connections around USA. We are currently supplying companies like METRIE, EMPIRE, SHAMROCK TRADING, and ECMD. Our product meets USA standards and our primer line is gesso free.
 
Company ID: 104870 - Click Here for Full Details
Product Lines:
Distributor/Manufacture of Rubber Strips, Rolls, Sheets, and Gaskets.

We have a Large Variety of Different Rubbers such as Neoprene, Silicone, EPDM, EPDM Roofing. 
 
Target Markets:
Companies that may Use Rubber in their Manufacturing/Production. 
 
Sales Opportunity:
Our company is unique because we offer a product that is used nearly everywhere. All production plants use rubber gaskets in some way. We will give you the tools and rubber knowledge you need to be successful. Rubber is so common in the work area you are bound to succeed. We are offering 6% commission.
 
Company ID: 92964 - Click Here for Full Details
Product Lines:
Primary Specialties Include: Precision CNC Turning, Precision CNC Milling, CMM Inspection and Prototyping as well as General Turning, General Milling and Maintenance Repair Parts.

Secondary Operations Include: Heat Treating, Grinding, and Coating. 
 
Target Markets:
Large and Small Organizations Requiring Precision CNC Machining Services. 
 
Sales Opportunity:
Our organization has over 28 years of experience, 30 Precision Machines which allow us to offer highly customized solutions to our customers with extremely rapid delivery schedules. We are a Customer Focused Organization seeking an Energetic, Experienced Sales Representative to assist us with our current company expansion. We Offer attractive Commission Structures and a collaborative working environment.
 
Company ID: 104859 - Click Here for Full Details
Product Lines:
Custom Structural Steel/Plate Work Fabricator that is CWB Certified Under CSA Standard W47.1 Division 1 and proudly Canadian with our Plant Located in Coquitlam, British Columbia.

We are Focused on Serving Western Canada and US Ondustrial Sectors for over 50 years. 
 
Target Markets:
Targets include Site Owners and Industrial Contractors/EPC Firms in the Bulk Material Handling, Power Generation, Mining/Minerals & Oil/Gas, Processing Plants, and Pulp & Paper Sectors. 
 
Sales Opportunity:
Looking for a sales representative to uncover structural steel and plate work fabrication opportunities to bid on in the industrial sector that ranges from 100-5000 tons in size and located in Western Canada & US. We are very competitive and a low risk supplier option. We have an excellent track record and have operated for over 50 years. We also have water access to the Pacific Ocean.
 
Company ID: 104860 - Click Here for Full Details
Product Lines:
Bolts, Nuts, Washers, Castings, Forgings, Machined Parts, Assemblies.


All Products for the Utility Poleline Hardware Application. 
 
Target Markets:
Large OEMs, Distributors & Utilities who have High Volume Requirements. 
 
Sales Opportunity:
Our company is an importer distributor having large volume items made for the Utility Poleline industry. Our products are made in Asia, but we are an American company. Most of the parts are made special to our customers prints. We are looking for representation to sell customers outside the USA. Order must be in high volume to ship full containers from our factories direct to your customer. If you have a stocking warehouse in your location, you could distribute the items to your customers in smaller units.
 
Company ID: 104806 - Click Here for Full Details
Product Lines:
European Modern Style Anodized Aluminum Railing Systems. 
 
Target Markets:
Builders
General Contractors
Retail Stores
Fabricators
Distributors
Fencing and Decking Companies
Architects
Engineers
Designers 
 
Sales Opportunity:
Our company has a one of a kind anodized aluminum railing system. our product is a green product and is known to resist extreme Caribbean weather conditions. our railing systems are tested in USA. our clients love how modern it looks and how it does not leave finger prints like stainless steel does.
 
Company ID: 104371 - Click Here for Full Details
Product Lines:
Drinking Fountains, Bottle Fillers, Drench showers, Eye/Face Washes, Mixing Valves, Chillers, Parts, and Accessories. 
 
Target Markets:
Owners, Architects, Engineers, Contractors, Distributors, End-Users. 
 
Sales Opportunity:
Company has been in business since 1906, privately held, solid foundation, with good market penetration. Additional information when you submit a sales inquiry to us. High commission dollars in a structured territory.We are technically superior in our product offering than others in our space. We support with field leadership, literature, marketing white papers, webinars, etc.
 
Company ID: 103415 - Click Here for Full Details
Product Lines:
Janitorial/Sanitation Paper.

Virgin & Recycled Bath Tissue: Single Roll, JRT, Small Core, Coreless, Split Core. White & Kraft Hardwound Towel, Multi & Single Fold Towel, Centerpull Towel, Interfold Napkin. Bath Tissue for Home Use Configurations (Printed Poly for store Sale). Premium Private Label/Generic. 
 
Target Markets:
Janitorial/Sanitation and Food Service Distributors or Large Contractors, End-Users (Truckload & Multi-Pallet Accounts). Private Label or Generic Brands of Bathroom Tissue Rolls in Home Use Configurations (Wrapped in Printed Poly). We Service States in the Southwest and Pacific Northwest. 
 
Sales Opportunity:
Premium materials in generic brands priced to sell. These are volume sales with steady repeat/"turn" automatic reorder business. We are looking for reps who understand paper, for it is necessary to set a commission structure that keeps the line competitive with competitors and other large manufacturers who use in house sales personnel.
 
Company ID: 92698 - Click Here for Full Details
Product Lines:
We are Funeral Suplayer. We make Coffins and Caskets.

Our target markets North America, Europe, and Africa. We make First Class Caskets and Coffins. We Offer Low Prices. 
 
Target Markets:
Wholesalers, Chains, Funeral Homes, Online Sellers, Sales Agents, Distibrutors. 
 
Sales Opportunity:
We are making unique caskets and offer low prices. We are located in Izmir, Turkey, very close to Europe and Africa. Close to east coast of USA. We prefer to sell by container. We prefer long term business relationship and contract production. We offer high commission. We produce 1,000+ caskets a month. We are a family owned company with good relations and good cooperation.
 
Company ID: 104814 - Click Here for Full Details
Product Lines:
Portable Work Light
- Single/Daisy Chain Work Lights
- Made by MIL-PRF-44259-E Standard
- Water Resistance
- Fluorescent/LED Versions
- Lightweight/Portable Carry 
 
Target Markets:
Architects, Contractors, Engineers, Construction Agents, Large Tents, Disaster Relief Carriers, Retail, Firefighters, any Fields that are Involved in Outdoor and Building Construction Sights. 
 
Sales Opportunity:
Our company has been a major government contractor for over 20 years by manufacturing components for military and defense commercial use. With that our technology and products have been approved by the Government which insures our quality of making products. Our portable fluorescent, LED single, daisy chain work lights are one of our military approved quality products that may be perfect for the industrial and commercial use. They are made by the Military Standard (MIL-PRF-4459-E), slim and durable but rugged design is ideal use at construction fields and other outdoor use. More information can be provided by submitting a sales inquiry to us.
 
Company ID: 104807 - Click Here for Full Details
Product Lines:
Industrial, Commercial, Residential 100% Cycloaliphatic Epoxy Coatings & Flooring.

Featuring DYI and Product Only Kits. Products Ranging from 1.5 to 165 Gallon Drum Kits. Only product with Antimicrobial Agent. Unique Market Ready Packaging. Over 65 years experience. 
 
Target Markets:
Looking to market to Big Box, Retail Chains, Automotive Categories, Home Improvement Chains, and Categories. Architects, Designers, General Contractors, Hospitals, and Culinary. Can be Used in an Industrial, Commercial, Residential Environment. 
 
Sales Opportunity:
Most Durable Floor/Epoxy Coating on the Market. 5x Thicker than water based or solvent based epoxy products and 10x the wear resistance! Lifetime Warranty, Increased Light reflectivity, Beautiful Restore and Protect, Antimicrobial. Guaranteed Highest Margins. Best Product Choice in this category. High Volume Production Lines.

Available as DYI Kit for Home Users as well as available in large quantities for industrial and commercial use. Now more than ever increased consumer knowledge and interest. 900,000 daily searches online for keyword phrase "epoxy coatings" alone. High amount of consumer interest now more than ever. Great timing to gain market share.

The only and best alternative to inferior water and solvent based product such as Rustoleum. Truly most durable coatings on the market. This product listing is set up for concrete, wood, metal flooring. However this coating can be used for any market segment where epoxy coatings are desired or required.
 
Company ID: 104720 - Click Here for Full Details
Product Lines:
Our product line includes Stainless Steel Alloys both Coated Electrode and Mig/Tig Form as well as Nickel Based Alloys both Coated Electrode and Mig/Tig Form.

Other Specialty Welding Alloys can be Made Upon Request. Carbon Steel and Low Alloy Coated Electrodes are also part of our Product Line. 
 
Target Markets:
Main targets are Retail Stores such as Welding Supply Stores, Industrial Supply Stores, or any Retail Outlet that Carries Welding Consumables. 
 
Sales Opportunity:
With over thirty years of experience manufacturing welding alloys in North America we are now entering the U.S. market. This is a great ground floor opportunity for the right person. Technical knowledge of welding alloys and applications is a huge plus.
 
Company ID: 104798 - Click Here for Full Details
Product Lines:
Aluminum Ceiling Tiles, Mineral Fiber Ceiling, Suspension System, Vinyl Flooring, Reflective Insulation, Bathroom Partitions, 3D Walls, Acoustical Ceiling, Drop Ceiling, Main Tee, Cross Tee, Wall Angle, Carpet Floor Tiles, Duct Insulation, Wall Finishes, PVC Walls. 
 
Target Markets:
Tile Distributors, Architects, Interior Designers, K&B, Flooring Dealers, Flooring Contractors, Hospitals, Public Health Clinics, General Contractor, Building Material Distributors, Supermarkets, Restaurants, Museums, Hotels, & more. 
 
Sales Opportunity:
This is a great opportunity for you to grow with us. Unlimited earning potential for you. Our company gives you the opportunity to make astronomical amounts of money. It’s up to you how successful you will be. Marketing support material available.
 
Company ID: 104778 - Click Here for Full Details
Product Lines:
PVC Extrusions in Rigid and Flexible PVC, PVC Accesories, Drywall Corner Beads, J-Beads, Z-Beads, Stucco Corner Beads, Window Gaskets, Refrigerator Gaskets, Point of Purchase Extrusions. 
 
Target Markets:
Drywall Distributors all over the US, contractors, Building Material Distributors, Refrigeration Aftermarket Distributors, aluminum Window Manufacturers. 
 
Sales Opportunity:
Ours is a very flexible company to work with. Our extrusion capacity and experience will allow you as a sales rep to offer high quality product meeting US construction standards at a very competitive price. Our plant located in Heredia Costa Rica, gives an advantage to supply east and west coast without having long waits for the material. as we have not incurred largely in the US, here is your opportunity to take a good amount of states and represent the company.
 
Company ID: 103509 - Click Here for Full Details
Product Lines:
Specialty Products for Industrial Construction Projects.

Offerings include Leave-in-Place Armor Expansion Joints, Leave-in-Place General Construction Expansion Joint, Leave-in-Place Curb Forms, and a Heavy Duty Dock Bumper. 
 
Target Markets:
Alsset markets its products to Architects/Enginees, Specifiers, Facility Managers, Municipality Engineering and Construction Service Departments, Concrete Sub-Contractors, and Design/Build General Contractors. 
 
Sales Opportunity:
See revised open territories.

Up to 20% commission paid. Alsset Engineered Products is a "renewed" company with products that are Smarter designed, provide Better solutions for functionality and longevity while making the installation process Faster. Smarter, Better and Faster gives our clients the ability to 'sell' our products to the targeted markets.

Our company is looking for experienced reps with current client base in the industrial facility ownership and construction segment with an emphasis on concrete flooring companies. Experience calling on engineers and designers is critical for success. An aggressive pricing structure will allow reps to close sales while earning strong commissions.
 
Company ID: 100040 - Click Here for Full Details
Product Lines:
Parking Garage Waterproofing Systems, Concrete Restoration & Repair Systems, Industrial Epoxy Coating Systems, Architectural Epoxy Coating Systems. 
 
Target Markets:
Consulting Engineers, Architects, Restoration Contractors, Waterproofing Contractors, Flooring Contractors, Epoxy Contractors, Coatings Contractors, Real Estate Property Owners, and Management Firms. 
 
Sales Opportunity:
This is an outstanding opportunity to work with a recognized international company with a proven track record in the traffic deck waterproofing industry, and is motivated to grow sales in the United States market. The ideal sales partner will be experienced in and already selling complimentary products to the above target markets with lines such as expansion joints, cementitous concrete repair products, caulking materials, concrete preparation equipment, maintenance coatings. Lucrative and exclusive sales & marketing territories are available all over the United States.
 
Company ID: 104737 - Click Here for Full Details
Product Lines:
Automatic & Semi-Automatic Interlocking Aluminum Door and Ballistic Glass Systems for Building Safety and Security.

Our Products are Premium Priced are Site Specific and Recognized as the Gold Standard for Interlocking Door Technologies. 
 
Target Markets:
National Footprint Banks, Credit Unions Courthouses, Jails, Detention Centers, Industrial Facilities, Airports, Government Agencies within Departments of Defense, Energy, and Homeland Security. Target Geographic Markets are CA, TX, NY, FL, AZ, WA. 
 
Sales Opportunity:
We are a premium nationally recognized brand of interlocking Safety & Security Entrances. Your audience is security conscious and your target market is any facility that uses guards, handles high value items or is mandated to protect employees and patrons. Your leads will generate purchase orders that range from $40,000 - 60,000 on average, with some orders exceeding $100,000. We offer 12% commissions on leads generated by your efforts and 6% residual commissions for additional projects from the same lead.

The amount of time you'll spend on a lead or project may be an hour or less. Our technical sales engineers and resources will do the heavy lifting working with qualified leads. We'll also pay 6% residual commissions for orders from the same end user. We do direct mail marketing to target audiences nationally and refer leads to corresponding sales teams. We participate in prospect meetings, trade shows and site visits.

Ours is the only company in the US that offers interlocking door technologies approved by the Department of Homeland Security and is an approved vendor by the General Services Administration, where government buyers search for qualified suppliers. The effective sales rate per hour exceeds $150 per hour. In other words 100 hours per year, or 2 hours weekly, spent generating leads may produce $18,000 in commissions. One sale qualifies any rep for a free trip (airfare & hotel) to our ballistics testing in the Rocky Mountains outside of Denver.
 
Company ID: 104732 - Click Here for Full Details
Product Lines:
Wire Harness and Cable Assemblies, Cord Sets, Integrated Electrical Assemblies.

Experts at High Complexity, Low, and High Volume. Our company is Vertically Integrated, can do Injection Molding, Stamping as well. Operations in US and Mexico. Company is Great at Niche and Difficult Wire Harness Applications. 
 
Target Markets:
We Service the Off-Highway, Commercial Vehicle, Power Gen, Locomotive, Medical, and Industrial Markets. 
 
Sales Opportunity:
We will negotiate an equitable commission structure, uncapped, that is agreed upon in advance. Our company has excellent quality and delivery and a track record of launching products on time. If interested please contact to discuss. Lucrative opportunity for the right firm or individual.
 
Company ID: 104632 - Click Here for Full Details
Product Lines:
Synthetic Roofing Underlayment
House Wrap & Seaming Tape
Accessories
Erosion Control Products 
 
Target Markets:
Building Suppy Stores
Contractors
Retailers
Construction
Big Box Stores
Roofing & Siding Companies
Metal Roofing 
 
Sales Opportunity:
Our company has over 40 years experience in the building material products industry, and specializes in the distribution of Synthetic Roofing Underlayment, House Wrap, Tapes and Erosion Control Products. We were one the first distributors of Synthetic Roofing Underlayment, and we have National Distribution coast to coast, even direct to each store. We are continuously expanding our product portfolio to meet the needs and requests of its Customers.

All sales territories available throughout the USA
Company will furnish sales materials
Commission is 5% of invoice net of freight
 
Company ID: 104672 - Click Here for Full Details
Product Lines:
Upscale European Windows, Doors, and Components. 
 
Target Markets:
Dealers and Distributors located in Southern California including San Diego. 
 
Sales Opportunity:
We are looking for 1099 independent manufacturers sales representatives contacting dealers/distributors from our existing list. We have manufacturers principle lines already, just looking for help selling to dealers. Our lines are high quality european windows, doors, components. Training provided. If you have experience will be a plus. Please submit a sales inquiry to us if you are interested for additional questions.
 
Company ID: 104662 - Click Here for Full Details
Product Lines:
Our company is looking for a Rep Master, Manufacturers Representative Partner in Germany, France, and the UK.

This Position Requires an Experienced Associate or Company. Financial Rewarding is Negotiable and very Competitive Commission! 
 
Target Markets:
European Market.
Especially Germany, France and UK. 
 
Sales Opportunity:
We are looking for partner in Europe!

Our company is looking for medical device sales representative partner in Germany, France, and the UK. This position requires an experienced associate or company. Financial rewarding is negotiable and very competitive (commission)! Since 1993, our company has grown into one of the worldwide leading healthcare enterprises. Our mission is to research and develop high quality, easy to use and affordable medical products (including tele-health) for our customers worldwide. Please submit a sales inquiry to me.
 
Company ID: 16471 - Click Here for Full Details
Product Lines:
Marble, Limestone, Granite Tiles and Pavers. Countertops, Porcelain Tile. 
 
Target Markets:
Tile, Stone, and Flooring Companies (Dealers and Distributors), Hardscape Paver and Brick Companies, Architects and Interior Design Firms, Hospitality Companies, Construction, Developers, and Projects. 
 
Sales Opportunity:
Tile & Stone Sales Agents Wanted.

An International manufacturer and distributor since 1983. Exclusive products, territories, and established customers. We are one of the largest stocking wholesale companies. Over 5 ½ million sq.ft. in stock in the US. Direct containers or truckloads and pallets for immediate delivery. Free showroom sample displays. And architectural/interior design firm library sample programs.

We supply A LOT of very large projects throughout the country. We are “the experts” in the US for the tile & stone industry. Huge inventory of tiles and slabs with our own fabricating facility in the southeast US. We also own a trading company, facilities, and offices in China. We never cut your territory or commissions because you are making too much money! Just looking for good people. Independent agents only. Experience with tile or stone. We can train you on the products.

These are just a few of the projects that we have supplied: The Setai Hotel (NYC), The Omni Hotel (Nashville), The Crown Plaza (JFK), The Belagio, The Wynn, and Treasure Island Casinos (Las Vegas), The Trump Projects (USA), Lennar Homes, Icon South Beach, Hallendale Beach Club, Apogee, Loews Hotel, (Miami), The Metropolitean (San Fransico, CA), Lennex Mall (Atlanta), All Sandals Resorts International, SLS Hotels, and many more.
 
Company ID: 104651 - Click Here for Full Details
Product Lines:
Our Patented Bathtub Protector, Door Protection, Builder Foam Floor Protection, Floor Protection, Carpet Protection, Counter Protection, Cabinet Protection, and many more Temporary Surface Protection Products. 
 
Target Markets:
Building Supply Companies. Companies that Distribute Building Products 
 
Sales Opportunity:
Our company's Patented tub wrap and other surface protection products are in high demand throughout the US and Canada. Building supply companies are always looking for solutions to common problems in the building industry and we have the solutions. We have created a unique product catalog and are very focused on customer service. We also offer product samples as part of our marketing program. We pay a 10% commission on all products sold to distributors in your territory.
 
Company ID: 104631 - Click Here for Full Details
Product Lines:
Our company is the Premier Developer and Manufacturer of Carbon Monoxide Ventilation Control Systems.

We also Distribute Carbon Monoxide Sensors, Alarms, Detectors, and Carbon Monoxide Controls that are False Alarm Free. 
 
Target Markets:
Our products are Designed Specifically for Parking Garages, Tunnels, Warehouses, car Workshops, Fire Stations, and Commercial Kitchens. They are Sold to Property Management Companies, HVAC, Electrical and Mechanical Contractors, Security Systems Installers, and Energy Management Companies. 
 
Sales Opportunity:
On the West coast we are represented by a successful energy saving company that specializes in installing CO ventilation systems, processing rebates, and doing the yearly maintenance. Our goal is to establish similar partnerships in other areas of the country. 
 
Company ID: 103536 - Click Here for Full Details
Product Lines:
Factory Reps Needed In Western US that sell Manufacturer of Compressed Air Dryers, Related Products, and Accessories. 
 
Target Markets:
Distributors of Compressed Air. 
 
Sales Opportunity:
Our company is a family-owned manufacturer of compressed air dryers, in business since 1979, looking for a manufacturers rep who has experience selling compressed air products. We have a large historical presence in the industry and is looking to reconnect with past customers. This is an opportunity for a manufacturer's rep to work with a rapidly growing company where the possibilities are limitless. We will provided product training and marketing/sales support when needed.

Must Have Prior Compressed Air Industry Sales Experience!

Roles and Responsibilities:
- As a manufacturers rep you will prospect, source, and maintain relationships with compressed air distributors in assigned area.
- You will be required to achieve or exceed assigned sales goals by developing action plans and schedules to identify specific sales prospects, targets, and/or markets and to project number of contacts to be made.
- The manufacturers rep calls on, and sells products directly to distributors in assigned area and will actively engage in planned prospecting activities geared at increasing the customer base.
- He/she will follow up on new leads and referrals resulting from field activity and will maintain regular contact with existing and new distributors (particularly key accounts).
- The Sales Representative will also respond promptly to distributor inquiries, introduce new products, keep up-to-date records and do competitive analysis.
 
Company ID: 104627 - Click Here for Full Details
Product Lines:
Clay Roof and Wall Tile. 
 
Target Markets:
Architects, Owners, Contractors and Distributors. 
 
Sales Opportunity:
Unique opportunity to sell clay roof and wall tile. 125 year old USA based company has established product lines with throughout the world. Our products are installed on all types of buildings such as Universities, public buildings, high-end custom homes, hotels, and clubhouses.
 
Company ID: 104616 - Click Here for Full Details
Product Lines:
Our product is the only patented vapor barrier system in the United States to guarantee stopping air infiltration in the Cold Storage and food processing industry. 
 
Target Markets:
You will be selling to the end users, food storage warehouse/processing companys, architects, design/build companys.
Other controlled environment industries. 
 
Sales Opportunity:
The industry has become aware of the importance in improving the building envelope to prevent air infiltration. The Food Safety Modernization Act requires the prevention of ice buildup and/or condensation from coming in contact with food while being processed and/or stored. FSMA is being enforced by the FDA. We are the only company that guarantees prevention. We train, supply marketing material, assist you with the forensic evaluations and proposal preparation. The commission structure is the best in the business.
 
Company ID: 96887 - Click Here for Full Details
Product Lines:
Licensed Stanley And Westinghouse Electrical Accessories - Timers, Extension Cords, Surge Protectors, Night lights , etc.

300 SKUs In Stock Full Line. 
 
Target Markets:
Independent Hardware, Distributers, Local Retailers, Discounters, and Regional Chains. No Big Box Retailers. 
 
Sales Opportunity:
Looking for sales reps for our licensed Stanley and Westinghouse brand electrical accessories. We carry a full line with over 300 SKUs. Nightlights, timers, extension cords, etc.
 
Company ID: 104608 - Click Here for Full Details
Product Lines:
Printed Circuit Boards
1 - 30 Layers
Thermal Management Materials
Blind/Buried Vias
Via in Pad Technology
Mil-Spec 55110
ITAR Registered 
 
Target Markets:
Purchasing Managers, Buyers, Engineers. 
 
Sales Opportunity:
Very good opportunity with large Printed Circuit Board manufacturer with facilities in the USA and in India. Aggressive commission structure and highly motivated customer service team. We support our reps because they are the live blood of our business.
 
Company ID: 104604 - Click Here for Full Details
Product Lines:
Energy Efficient Evaporator Coils for Walk-in Coolers and Freezers.

Installing these Coils saves the Business Thousands per Year in Operating Costs and Reduces over all Energy Usage by up to 50% or more, and Services that Offer Rebates for Lowering their Energy Footprint, Financing is Available. 
 
Target Markets:
Businesses and Industry that use Freezers and Coolers, Gas Stations, Restaurants, Franchises, Food Industry, Supermarket Home Offices, Heating/Cooling Companies, Air Conditioning Installation Companies, and Chain Stores. 
 
Sales Opportunity:
Our company offers the only energy efficient evaporator coil on the market, installing these coils either new or as an upgrade saves the business thousands per year in operating costs and reduces their over all energy usage by 50% or more.

We work with additional energy saving options that offer rebates for businesses that lower their energy footprint and financing is available. Commissions are based on units sold, product specifications and sales information provided, knowledge or HVACR, freezers, coolers, and construction will be helpful for the right, new or established representative.
 
Company ID: 7432 - Click Here for Full Details
Product Lines:
An Existing Detergent Additive that Removes Difficult Grease and Grime from Fabrics.

Particularly Applicable to Mechanics, Chefs, and Those that Work Hard. Product Receives Rave Reviews and Numerous Requests from Consumers Desiring to Purchase Locally. Currently Available Online Only. 
 
Target Markets:
Farm Stores
Food Service
Industrial Supply Chain
Hardware 
 
Sales Opportunity:
Long established consumer products manufacturer with national distribution, exceptional references and financial rating. Our company is experienced in support of independent ales reps and provides excellent support and highly responsive follow through. We are seeking experienced, aggressive, ethical reps to hit the ground running with this great opportunity. All responses confidential.
 
Company ID: 103776 - Click Here for Full Details
Product Lines:
Our Product Line is a New Patented Style of Brass Ball Valve which is Freeze Resistant/Freeze Tolerant.

It is Manufactured in 6 Sizes. This product is the Answer to the Current Problem of a Ball Valve Cracking when it Freezes with a Liquid in it. 
 
Target Markets:
Contractors and Supply Houses to Lawn Irrigation & Landscape, Mining Industry, Pressure Washing, Water Tanks, Farm and Agriculture, Ace Hardware Stores, Mom & Pop Stores, Big Box Stores, Plumbing Supply Houses, Irrigation Supply Houses, etc. 
 
Sales Opportunity:
This is an Excellent Opportunity because this is a NEW "Patented" product so you will be getting in on the ground floor! There is no other competing product line in this Freeze Resistant class of ball valves, so You will never have to compete against another brand. The product sells itself.

It has a Lifetime limited warranty not to crack! It is a simple product that saves the end user time and money. We are a small but growing company that will support you in anyway we can. Exclusive territories are available in many parts of the US & Canada. We offer competitive commission rates and monthly bonuses for top performers.
 
Company ID: 104548 - Click Here for Full Details
Product Lines:
Multi-Function Flashlights, Lanterns, Camping Accessories, Emergency Preparedness Products, Everyday Use Products with Safety Built-In.

Our Products are Durable, Environmentally Friendly and Fun when you're Traveling, Boating, Hiking, Camping, or Simply Commuting to and from Work. 
 
Target Markets:
Asia, Latin America, Africa, Europe (Worldwide). We are currently only looking to bring in sales Reps/Brokers for our International Growth. You can find our products at many top US retailers, including Home Depot, Wal-Mart, Target, Ace Hardware, Sports Authority, Dicks, Meijer, Kroger, and more. 
 
Sales Opportunity:
We are looking for new sales reps/brokers around to world to help reach new markets and customers. These reps/brokers should be high energy, passionate about sales and have a winning attitude. Sales Reps/Brokers who are native to the regions they are working in who can be the go between for us and the customer. We offer competitive compensations.
 
Company ID: 104163 - Click Here for Full Details
Product Lines:
LED Lighting.

OPP Retail Program in Full Color Trilingual Packaging. All Sizes Available and Packs. Also Offer a Premium Line for Both Retail and Commercial Use. TV Mounts – OPP Retail Program with Patent Pending Designs. TV Consoles, Monitor Mounts, and HDMI Cables. Automotive Power Accessories. 
 
Target Markets:
• North American and Caribbean Retailers to include Mass, Warehouse Clubs, Home Improvement, Hardware, Drug, Food, Distributors, Dollar Stores, Lighting Stores, Specialty, etc.
• Commercial, Hospitality, Contractors, Distributors, GSA, Design Firms, Hospitals, Municipalities, Schools, etc. 
 
Sales Opportunity:
Our product lines include:
• LED lighting OPP retail program includes all consumer sizes in full color packaging. Single or multiple packs
• LED lighting, Premium quality for retail and commercial use
• LED Contracts – Turnkey lighting solutions for commercial use
• TV Mounts – OPP retail with Patented designs
• TV Consoles, PC Monitor Mounts, HDMI cables
• Automotive Power accessories
• Branded, house, co-brand, private label or bulk packaging.

• Seeking experienced reps with close working relationships within their respected markets to build long term programs
• Global organization and seeking sales reps and distributors in US, Canada, Caribbean and Latin America
• Competitive commission
• Full marketing support
• Net/Net or Retail programming available
• We produce house brands for the largest retailers in US.
• Direct import and domestic shipping.
• Full EDI compliant.
• California based.

A&P, Ace, Advance Auto, Ahold/Royal, Albertsons, Aldi, AutoZone, Bed Bath & Beyond, Best Buy, Big Lots, BJ's Wholesale Club, Costco, CVS, Defense Commissary DeCA, Delhaize America, Dollar General, Dollar Tree, Family Dollar, Giant Eagle, Harris Teeter, H-E-B, Hy-Vee. Kohl's, Kroger, Lowe's, Meijer, Menard, Office Depot/OfficeMax, O'Reilly Auto, Price Chopper, Publix, Raley's, Rite Aid, Ross, Safeway, Save Mart, Sears Holdings/Kmart, Staples, SUPERVALU, Target, The Home Depot, TJX, Toys "R" Us, Tractor Supply, True Value, Walgreen, Wegman, WinCo, Winn-Dixie, and more.
 
Company ID: 103497 - Click Here for Full Details
Product Lines:
Granite Pavers, Pavers, Fire Pits, Fire Tables, and Fire Features. 
 
Target Markets:
Custom Swimming Pool Builders,Designers, Swimming Pool Products Retailers, Custom Builders, Architects, Landscape Architects, Patio Retailers, Hearth Retailers. 
 
Sales Opportunity:
Looking for Sales Representatives.

Our line of Granite Fire Pits are Custom Made in Daytona Beach, FL. We manufacture a very unique Fire Features that have been successfully tested in the Big Box retailers and are now being released for higher end/custom retailers such as Custom Pool Builders and Custom Home Builders!
 
Company ID: 104507 - Click Here for Full Details
Product Lines:
Engineering company provides custom design and integration services:
Industrial automation and control systems
Data acquisition systems
Custom software development
LabVIEW programming
Third party product integration
Design for power distribution
Machine design
Electrical panel fabrication. 
 
Target Markets:
Western Pennsylvania, central Pennsylvania and northern Maryland. Sell our engineering services to industrial, commercial and academic customers. Our current client base includes manufacturing plants, laboratory testing facilities and academic/research organizations. 
 
Sales Opportunity:
We are a small company with more than 30 years of technical experience. Our business model is based on forming partnerships with other small businesses that complement our core capabilities and allow us to provide a wide range of services to our customers. We are able to work independently on small scale projects and pool resources with our partners on larger projects. This structure allows us to minimize our overhead expenses and offer very competitive rates to our clients.

We already have some experience working with sales representatives on various projects. What has worked well in the past is when a sales rep has been able to sell their products to customers and offer our services for integrating those products into the customer’s application or for us to provide custom software development services for those products. We take the time to learn the technical details on the products that you sell and how to best fit them to the needs of your customers.
 
Company ID: 104497 - Click Here for Full Details
Product Lines:
Broad line of handheld LED Flashlights.

Competes and wins head to head against Maglite, Coast, and others. Currently in 25,000+ retail stores in North America. 
 
Target Markets:
Sporting Goods Channels - Retail and Distributors. 
 
Sales Opportunity:
Our line of flashlights are the fastest growing line of handheld LED flashlights in North America. Placement in 25,000 retail stores. Seeking diversification via sporting goods channels.
 
Company ID: 104490 - Click Here for Full Details
Product Lines:
We manufacture various rubber products as per custom requirements such as vibration pad, seals, O rings, grommets, bushings for automobile and industrial use, tile moulds etc. We use both natural rubber and also synthetic material. 
 
Target Markets:
OEMs, Automobile parts manufacturers,Industrial engine or machinery manufacturers. Spare parts resellers. 
 
Sales Opportunity:
We can custom make any rubber parts or mouldings as per customer requirments.

Its a great oppertunity for sale representatives to represent us in the target markets.
 
Company ID: 104483 - Click Here for Full Details
Product Lines:
Mineral Silicate Based Paints & Stains
Stone/Masonry Repair and Refinish Mortars and Penetrating Water Repellents
Concrete Repair and Refinish Systems
Unique Stucco and Plaster Systems for new and historic projects 
 
Target Markets:
Architects, Engineers and Specifying Authorities
Owners and Owners Agents, Historic Trusts, etc.
General Contractors, Restoration Contractors, Design/Build Firms, Builders, Masons, Plasterers and painting contractors 
 
Sales Opportunity:
Very unique construction finishing products, with virtually no equal in U.S. architectural market. Products have specific unique selling propositions for everyone involved in the buying process from design/specification to owners to contractors and applicators. Our products are extremely premium and we offer premium sales and service support. We do not compete with traditional paint companies but rather seek those projects that would most benefit from our unique combination of durability and weather resistance, light-fast and non-fading colors and compatibility with historic structures. Our focus is on historic restoration and the repair, refinish and protection of both old and new architectural concrete surfaces. Our sales process is longer and more complicated than most, so we seek experienced sales agents currently calling on the construction trade from design through installation.
 
Company ID: 104477 - Click Here for Full Details
Product Lines:
A unique plant based EP technology.

This is intertwined throughout our oil, grease and fuel additives family of products. 
 
Target Markets:
Trucking and large fleets,agriculture distributors and end-user in California. 
 
Sales Opportunity:
Based in Orange County, California and Houston, Texas. Our company has developed the most advanced technology in industrial lubrication today which dramatically reduces heat and friction and has over 50x the film strength of conventional lubricants. Our line of industrial products takes lubrication to the next level of performance in the most challenging environments.

Our technology has been developed and perfected over decades. Typical lubricants tend to migrate away from heat sources but it has a strong ionic (+) charge which allows it to bond to metal even under extreme heat and pressure, giving the lubricants formulated with this product unprecedented film strength and extreme pressure protection.

Our product is plant based, stable, non-corrosive, non-toxic, non-reportable and environmentally friendly.
 
Company ID: 73051 - Click Here for Full Details
Product Lines:
Manufacturer of Vinyl Wall-Covering with 3 Large Plants in United States seeks Multi-Line Sales Representative in all Territories. Our Commercial Wall-Covering is sold to all Major Hospitality and Healthcare Companies. Full commissions paid. We have a large customer base. 
 
Target Markets:
Reps will be selling directly to Hospitality and all types of Commercial and Healthcare Companies on a Direct to User Basis at Factory Prices . 
 
Sales Opportunity:
Our products are being sold to every Hotel Chain in the United States. We have Openings in many Territories and we Supply Full Sets of Sample Books and Samples to our sales reps at No Cost to them. Sales experience in the wall-covering field helpful but not necessary.
 
Company ID: 104438 - Click Here for Full Details
Product Lines:
Carbon Steels, Nickel Alloys, Stainless Steel, Structural Steel, Custom.

Our company Produces Steel Parts from 1 to 200 lbs.
Cores: Shell and No-Bake
Molds: Green-Sand, Shell, and No-Bake
6 Furnaces: 2100lb and 1500lb
Separate grinding areas for special alloys and specialized stainless steel production. 
 
Target Markets:
Petrochemical, Hydroelectric, Construction, Railroad, Naval, Firefighters, Infrastructure, and Automotive Clients. 
 
Sales Opportunity:
American companies reduce their total cost of ownership and benefit from unparalleled surface finishes when they buy from Goltra Castings.

Ours is a small, financially stable and privately owned US foundry that is ISO 9001:2008 certified to ensure high-quality castings and microfinishes. We reduce the pain of potential issues with unclear quality, communication problems, and shipping hangups from recent port strikes as well as geo-political turmoil.

Our company continually improves its production and logistics, proudly delivering cost-effective, ISO 9001:2008 certified quality products made in the USA.
 
Company ID: 104433 - Click Here for Full Details
Product Lines:
Electronic Contract Manufacturing Services
Design Services
Fabricated Component Manufacturing Services
Aftermarket Services
Inventory Asset Recovery Services 
 
Target Markets:
Primarily Technology companies producing a hardware product that incorporates Electronics and Fabricated components, (Plastics, Metals, Cables, Packaging) 
 
Sales Opportunity:
Actively seeking experienced sales professionals and/or sales rep organizations with the ability to sell professional manufacturing services and related services. Markets we are seeking additional indirect sales support currently include:

Boston MA
Metro NYC, NY
Metro Toronto, Ontario Canada
Raleigh-Durham NC
Chicagoland (IL, MI, WI, MN)
Florida (all Metro areas)
Austin, Dallas and Houston TX
San Jose/San Francisco CA
LA/Southern CA

Rapidly expanding service business paying EXCELLENT commissions up to 15% of Sales for qualified opportunities in the following market segments:

Computing (System and Embedded)
Communications/Telecom
Medical Device/Life Sciences
Industrial/Commercial
Aerospace
Defense
Automotive
Consumer Products

Great opportunity for the right sales professionals to earn outstanding recurring commissions from long-term, multi-year client engagements.
 
Company ID: 64923 - Click Here for Full Details
Product Lines:
Long Lasting Heat!

Disposable 10 hour Hand Warmers
Adhesive toe warmer (8 HR)
Insole Foot Warmers (9 HR)
Super Warmer (18 hr) 
 
Target Markets:
Hardware, Convenience Stores, Gas Bars, Food Stores, Outdoor Sports Stores, Pharmacy, Hospitals, Military, Law Enforcement, Safety Industrial. 
 
Sales Opportunity:
We are a well respected manufacturer with outstanding warmer products. Good commission structure. Our passion is to provide you with innovative products that improve the quality of your life. We approach this by developing something new and something different through a continuous spirit of ‘Creation and Innovation’ in everything we do and every product we offer. Whether it’s relieving the discomfort from fever or from migraine headaches, providing pain relief for minor muscle/joints aches or pains, or staying more comfortable outdoors when the weather gets cold, you can rely us to provide high quality products that improve your everyday life.
 
Company ID: 104418 - Click Here for Full Details
Product Lines:
Metal Fabricated/Machining Products and Assemblies. 
 
Target Markets:
Agricultural, Security, Transportation, Energy, Aerospace/Avionic, Military,
Food Equipment, Gaming and Medical Equipment. 
 
Sales Opportunity:
We are looking to partner with a firm that understands when you give the customer your word that they can ALWAYS count on you.

For over 44 years we have been supplying high quality sheet metal fabrications and machining to industry leading customers. We are a privately owned, ISO 9001.2008, Certified WDBE (Female Business Enterprise) Illinois-based Company. Our company culture is customer-driven and all efforts are focused on having us be recognized by our customers as the most innovative, reliable, and responsive organization in the industry.
 
Company ID: 94122 - Click Here for Full Details
Product Lines:
Our Company Specializes in Premium Quality Cargo Restraint for Light Duty Pick-Up Trucks and general vehicles: Both Interior Cab Restraints and Exterior Truck Box Restraints. 
 
Target Markets:
We are Looking for the Right Sales Team that can Build our Distribution Channels within the states. And has a strong relationship corporately with such distributors as Grainger, and Fastenal and other safety & MRO companies. 
 
Sales Opportunity:
We design and manufacture multi-functional interior and exterior cargo restraint systems for light to medium duty trucks & vehicles. Our products combine the highest level of performance with the greatest ease of use, while firmly securing loose cargo to better protect occupants and the public from unsecured items becoming projectiles.

We strive to achieve our goal of zero accidents and near misses on the road. Safety is of utmost importance to us and to our end-user, with cargo securement products now being mandated into worksite safety practices. We are the industry leader in light-duty Cargo Securement and we are based in Calgary Alberta, Canada, with good distribution within Canada with companies as Acklands Grainger to truck accessory distributors and uplifters. The end user profile is fleet vehicles: hydro, construction, mining, oil and gas and environmental exploration industries.
 
Company ID: 104416 - Click Here for Full Details
Product Lines:
Folding Doors for Exterior and Interior Applications.

We are a Small Flexible Manufacturer that Specializes in Folding Doors. Product is Tested and Approved for Use in Texas and Florida. 
 
Target Markets:
Window & Door Dealers. 
 
Sales Opportunity:
Folding doors are a growing part of the up-scale and high end production home market. We offer very competitive pricing and can do what others can't. Outside and inside corners. Radius units we can do it.
 
Company ID: 103983 - Click Here for Full Details
Product Lines:
Commercial Cabinetry, Millwork, Casework, Countertops, Bars, Upholstered Furniture, Booths, Tables, and store fixtures. 
 
Target Markets:
General Contractors, Architects, Designers, Restaurants, Hotels, Retail, Restaurant Equipment Dealers. 
 
Sales Opportunity:
We are a growing manufacturer of commercial cabinetry and millwork for the hospitality industry. We have been in business for over thirty years primarily serving the restaurant industry and are expanding our business into the upholstered seating and furniture line. We are looking for a rep or reps to grow with us as we expand into this market.

This is an excellent opportunity to work with a highly regarded manufacturer and with a financially stable company. Our quality is high and our design capabilities cutting edge. We boast a stable work force of experienced craftsman. Our product has been well received in the market place, however, we need help in building our sales channels.
 
Company ID: 104405 - Click Here for Full Details
Product Lines:
Custom Cabinetry and Furniture. 
 
Target Markets:
Upper middle and upper class families located in North Scottsdale and Paradise Valley, Valley wide designers and architects, General Contractors. 
 
Sales Opportunity:
Over 30 years we have been creating original handmade pieces that are elegant, timeless, unique, and functional. our skilled and experienced team of engineers and craftsmen will work closely with you to provide our customers with unique value added.

We offer products in the finest wood species in custom finishes available in hundreds of colors and hand-rubbed finishes. Our customers receive personalized process that guarantees unique and lasting results. You will be a part of an organization that provide unique handmade cabinetry and furniture with superior materials and finishes with countless design options. Our company offers unique working atmosphere.

Our members are considered as family and we support one another in good and bad. Currently we employ 21 employees with budgeted sales of 3M for 2016. Your compensation will be structured as base salary with commission compensation for your performance. Base salary is $32,000.00/year and commission is 10% of all sales you generate. We hope to hear soon from you to join us in our family.
 
Company ID: 104261 - Click Here for Full Details
Product Lines:
Very Unique & Rare Porcelain/Ceramic Printing Manufacturer.

We Print on All Porcelain from Dishware (Logos on Dinner Plates - Food Safe & Permanent Ink) to Pet Bowls, Tiles, Murals, and Logos on Ceramic Floors & Memorial Tiles. Our Pictured Tile is Cutting Edge - you haven't seen this before! 
 
Target Markets:
You will Open New Markets. We Sell to markets from Restaurants, Hotels, Pet Shops, Gift Stores, Pro Sports Teams, Tile Shops, Flooring companies, Kitchen and Bathroom Companies, and more. 
 
Sales Opportunity:
Reps, if you are looking for products that have no competition and you can create (if you want) and then sell to multiple targets (many different types of companies).

We are cutting edge porcelain/ceramic printing company. Printing on all types of porcelain and ceramic. From pictured tile to photo plates we do it. Think of being one of the first 'paper printer' reps in your area - well we are one of the only porcelain and ceramic printers in the world!

- Want your own design on a kitchen back-splash?
- Want to sell to businesses with their own corporate logo on ceramic floor tile in their lobby?
- Offer putting logos or website on dinner plates, mugs, bowls for restaurants/casinos and hotels also companies and pro-sports teams. We also produce memorial tiles for grave markers - this is a huge business, little competition.
- We are experimenting on printing on porcelain sinks (like a design or logo on a sink for hotel).
Your opportunity is either 10% commission or you can set your own margins as you sell to different types of customers.
 
Company ID: 98399 - Click Here for Full Details
Product Lines:
Graphic Design Services
Website Development
Search Engine Optimization (SEO)
Printing Services
Advertisement Creative Content Writing
Business Cards, Brochures, Banners, Magnetic Cards
Ecommerce Sites, FaceBook Sites
T-Shirts, Mugs, and Special Designs 
 
Target Markets:
Small - Medium Large Business.
Especially Franchise and Multi-Location across America.
Everyone Needs to Increase Sales and have Revenue Projections.
Doctors, Clinics, Vets, Hospitals, Dealerships. 
 
Sales Opportunity:
Since 2007 our company has been helping business and doctors in enhancing their image and create revenue generating websites and printing ideas. The best part of this opportunity is coach the client through the design process & have a complete design and estimating team that backs you 100%. Creative & imagination is helpful - but not necessary.Our competitive advantage is that we are a marking & revenue solution - able to look at the business from a different perspective. Typical printers focus on competitive pricing & some cases graphic design. We however are a creative powerhouse of ideas.

REP SUPPORT:
Our support process - has customer service agents, a graphic design group, and an estimator.
Our estimators do the math & coordinates the printing or graphic process for you. Your role is to represent our brand.
Our company is continuously advertising in the rep market which in turn the lead is forwarded to the field rep to follow-up them.

ADDITIONALLY:
- Customized email
- 800 # Company Phone Extension
- Material Support - Training

COMMISSION STRUCTURE:
Our payment is commission & Residual on each transaction. The Client is coached to continue to purchase from our Rep that receives residuals from each order.
For more information about the compensation structure - kindly contact us with your interest.
We are seeking representatives across America - Communities and small towns.
 
Company ID: 104400 - Click Here for Full Details
Product Lines:
Aluminium and Glass Railings
Aluminium Windows and Doors, Curtain-Wall
Retractable Insect Screens. 
 
Target Markets:
Construction: Architectural Products & Services
Construction: Millwork - Doors / Windows
Products by Material: Aluminum
Products by Material: Glass Products 
 
Sales Opportunity:
We are self made aluminium company with a market target of getting NORTH AFRICA.EAST AFRICA.AND THE SOUTH AFRICA our main priority.
we wish to introduce new brands on the market that will put us to the next level.this will be the opportunity to promote your product here in Africa.our commission structure will depend with the manufactures suggestions and the cost effectiveness of the production and sales prices in African market.
 
Company ID: 104389 - Click Here for Full Details
Product Lines:
Distributor of Technologically Advanced Mini Loaders, Self Loading, and Hi Tip Track Dumpers, Mini Track Loaders, Attachments, Aerial Lifts, Platforms, and Cranes. 
 
Target Markets:
Rental Company and Set-Up Dealer. 
 
Sales Opportunity:
Good products and really good possibitu to grow up, and in few time really nice earning. We have innovative products, really nice and incredible. We have been in the USA since 2012 and we have a warehouse in NY with parts and machines. Also we have Technician there too.
 
Company ID: 103612 - Click Here for Full Details
Product Lines:
Industrial Air Filter Equipment and Replacement Filters. 
 
Target Markets:
Power Facilities, Environmental Companies, Trucking, Construction, Industrial Applications. 
 
Sales Opportunity:
We are a small custom manufacture of the above products. We have over 30 years experience and service some of the largest power companies in the southeast. We have in-house water jet capabilities that open new markets for a good rep. This is a chance for an experienced rep to add a product line or develop a complete new business. Commissions are outstanding compared to the competition. Also ISO 9000 Certified manufacturer in Central Florida!
 
Company ID: 104384 - Click Here for Full Details
Product Lines:
Granite Slabs. 
 
Target Markets:
Fabricators, Designers, Architects, Builders, Contractors. 
 
Sales Opportunity:
We are a Granite Distributor, looking for experienced sales associates. Candidates should have strong knowledge of stone. We are a new company coming from Brazil. We pay salary plus commission.
 
Company ID: 103997 - Click Here for Full Details
Product Lines:
Aftermarket Automotive Light Bulbs - Headlight Bulbs, Mini Signal Light Bulbs, Full Range Automotive Light Bulb Products.

LED Work Lights for - Construction and Farming Machines, ATVs, Snowmobiles, Off-Road Locomotive, Cranes, & Forklifts 
 
Target Markets:
Automotive Repair Shops
Auto Service Centers
Collision Centers
Gas Stations
Fleet Service Shops
Equipment Repair
Smog Stations
Oil Change Stations 
 
Sales Opportunity:
This is a very specialized, low value product that should be pretty easy, straight forward sales to boost up volume. Low MOQ, easy sign up, flexible wholesale accounts for customers. Sales reps will receive marketing materials if needed, and once they receive customer's order information, they will be able to login our website and create orders and also see how much order their customer has received.
 
Company ID: 73675 - Click Here for Full Details
Product Lines:
Custom Flexographic and Digitally Printed Labels, UL labels, Thermal Transfer Print Ribbons, Thermal Transfer Printers, Water Activated Tape, Boxes, Stretch Film. 
 
Target Markets:
Label Distributors, Manufacturers of other products. Almost every product bought or sold has a label on it, or had a label on it at some point. 
 
Sales Opportunity:
We manufacture Custom Labels for Products, Inventory Tracking, and all other Applications. UL Certified. We have been in business for over 20 years. Looking for reps who already sell labels, or packaging reps looking to start carrying labels. We offer competitive pricing and commission with great lead time and flexibility.
 
Company ID: 104270 - Click Here for Full Details
Product Lines:
Zinc Die Castings. 
 
Target Markets:
All Manufacturing Sector's. 
 
Sales Opportunity:
We have the largest zinc die casting company in the east. We have been in business for over 60 years and family run. We Do zinc, we know zinc and we are the zinc experts.
 
Company ID: 102133 - Click Here for Full Details
Product Lines:
Innovative Residential Door Locks (All Functions). 
 
Target Markets:
Distributors Focusing on New Construction and Renovation, Door & Millwork Shops, Contract Lumberyards, Contract Hardware Suppliers, and 2-Step Wholesalers of New Construction Based Products. Other Channels include MRO and Age Assisted Facilities. 
 
Sales Opportunity:
Current Open Sales (Territories) Opportunities: Northern & Southern California, Las Vegas), Seattle/Portland, Colorado, NY, NJ, CT (Tri-States) & the Mid-Atlantic (VA/MD). This is an excellent opportunity with an established company with a proven track record with many innovative and strategic advantages over our competition.

We are in the first phase of launching our innovative Patented (won Best in Show at the International Builders Show) line of door locks. We offer a full-line (all functions & finishes) door locks, levers, handle sets & deadbolts. We are seeking individuals who are "hunters" & who are aggressive, out-of-the-box thinkers. We offer sales leads, product training & support.
 
Company ID: 104247 - Click Here for Full Details
Product Lines:
- AC/DC /PWM
- PFC controller
- Logic IC
- MOSFET
- Hall IC
- Transistor
- Diode
- TRIAC 
 
Target Markets:
- Lighting
- Power Supply
- Home Security System
- Home appliance
- Automotive 
 
Sales Opportunity:
We are the Taiwan semiconductor manufacture; with two solely owned wafer factories and one assembly plant. We provide wide range of products, short lead-time and competitive cost.
 
Company ID: 104227 - Click Here for Full Details
Product Lines:
We are One of the Original Preform Loop Manufacturers in America.

Our Induction Loops are Used in new and old road contruction. They come with an extensive warranty. We can build them to meet any spec and requirement. 
 
Target Markets:
This product Generally is Sold to Contruction, Electrical Distributers, or Road Construction Companies. We are Currently Working on our Middle East Market Due to the High Need for Infrastructure our Product is just what is Needed, for any Traffic Control System. 
 
Sales Opportunity:
This product is in demand all that is needed is to bring the opportunity to the right contruction and/or electrical supplier. Our company has been in business for over 20 years and we are chompin at the bit to grow into more and more markets.
 
Company ID: 104211 - Click Here for Full Details
Product Lines:
Rapid Prototype Castings, Low Volume Castings, Sand Casting, GDC Aluminium Casting, Investment Castings. 
 
Target Markets:
OEMs, Pump Industry, Compressor, Oil & Gas Parts, Marine Castings, Turbocharger, Automotive Engine Parts. 
 
Sales Opportunity:
We are manufacturer of Low volume castings & Rapid prototyping casting. One stop solution for ferrous & non-ferrous parts. From protoype to production.
 
Company ID: 104187 - Click Here for Full Details
Product Lines:
Oil Pumps, Grease Pumps, Diaphragm Pumps, Multiple Parts, and Accessories, Dispensing Valves, Bulk Grease.

Complete Sales, Service, and Installation of Automated Lubrication Systems. 
 
Target Markets:
Contractors, Mining, Industrial, State Government, Air National Guard, Utilities, Garages (Private Dealership), Individuals. 
 
Sales Opportunity:
30 years in the field with combined 50 years experience. Authorized Lincoln Industrial repair/distribution facility. We have a successful track record with the mining, industrial, state, military communities. Having contacts with multiple vendors, we are needing to expand our market due to economic downturn. A strong advantage of our products is being the only supplier in this field in the state while serving the surrounding four states as well. Having a parent company.
 
Company ID: 104181 - Click Here for Full Details
Product Lines:
Lead Generation Services.

Internet marketing; SEO, Pay-Per-Click, Social Media Marketing, Website Development, Content Marketing, PR, and more 
 
Target Markets:
Manufacturers and Service Providers. Business Owners, Executives & Marketing Directors. 
 
Sales Opportunity:
Our company has been providing successful lead generation services since 2000. Our client range from small startups to multi-billion dollar, Fortune 500 companies. Commission for first referred sale ranges between $500 - $5,000. Commission on your second referred sale (and thereafter) increases dramatically.
 
Company ID: 104173 - Click Here for Full Details
Product Lines:
We Manufacture Custom Wood Components.

Our Products now are Made for a Company that Manufactures Tool Bits and we Make the Wood Packaging for their Sets. They are a Major Well Known Company. I am looking to Expand our Business. 
 
Target Markets:
Other Manufactures or Distributors. 
 
Sales Opportunity:
I'm not the salesman that's why I am looking for you! Although we are a small company and are looking to grow, we are also able to custom mass produce parts.
 
Company ID: 94886 - Click Here for Full Details
Product Lines:
Our Product is a Proprietary Urban Tree Care System Designed to Protect Sidewalk Trees, Enhance Streetscape Aesthetics, while Allowing Cities to Promote Local Events/Businesses.

The Alternative Solution to the Problems Associated with Tree Grates. 
 
Target Markets:
- Landscape Architects
- Municipalities, Cities/Public Works
- Campus/Universities
- Commercial Developers

Must have an established network consisting of our target market.
Product brochures will be provided.
Demo systems provided for install demonstrations. 
 
Sales Opportunity:
We are a startup company looking to add strategically based sales rep for the US. With product development & testing finally completed, we are set to launch.
A reliable network/experience with the target markets is a must. Our company's goal is to become the industry standard for urban tree care.

Compensation:
- 100% commission base starting at 10% of gross territorial sales (negotiable base on experience).
- Up to 10% year end bonus on total net sales of company as determined by total sales ranking.
 
Company ID: 104133 - Click Here for Full Details
Product Lines:
Custom Designed and Built Special Purpose Mobile Equipment: Directional Drills, Scalers, Demolition Equipment, Tow Tractors and Trucks, Mobile Material Handling Equipment, Automated Mobile Equipment, Custom Hydraulic Control Systems, Mining Equipment, Fabricated Robotically Welded Components. 
 
Target Markets:
Demolition Contractors, Engineers, Engineering Companies, Utilities, Mining Companies, Steel Mills, Metal Mills, Slag Removal Companies, Railroads, Specialty Contractors, Forestry, Waste Handling, Material Handling, Trenching, Tunneling 
 
Sales Opportunity:
Family owned engineering design/build company over 75 years old. Experienced mainly in the mining, tunneling, and railroad industry that wants to branch out into other areas. Rich history of building the safest, most reliable, most productive, most cost effective machines in the industry.

Engineering staff of 14 with extensive experience in designing and building specialized mobile drilling, scaling, demolition, towing,hauling,and material handling mobile equipment. Experienced in diesel and electric and diesel/electric powered machines. Experienced in designing and building machines for extreme conditions and explosive environments.

In-house design and programming of semi-automated and fully automated canbus controlled machines. Although we do not currently have specific product lines for industries outside of mining and tunneling, we are looking for representatives to help us look for niche opportunities that use our extensive experience, knowledge, and respected history of being recognized as number 1 in our industry.
 
Company ID: 98228 - Click Here for Full Details
Product Lines:
LV UL891 Switchboard
LV UL1558 Switchgear
Medium Voltage Switchgear 5kv to 15kV
Smallest Footprint 5-15kV ANSI Metalclad Gear ARC Resistant
Paralleling Generator Switchgear
PDU's
Automatic Transfer Pair
Switchgear Modification and Retrofit
Custom Controls and Integration
Substation Switchgear 
 
Target Markets:
Data Center Mission Critical
Healthcare
Financial
OEM's (Paralleling Gear for Generator Manufacturers)
Government
Power Plants
Oil and Gas 
 
Sales Opportunity:
Our company is 100% vertically integrated. We build our gear from the ground up with copper and steel in-house. We have UL extensions and can provide any major manufacture of breakers, meters and controls. Our company pays 7% commission on all projects. Most projects are between $200K and $2M and large territories available. Must have working relationships with Electrical Contractors, General Contractors and Engineering firms. Must be able to understand electrical infrastructure and electrical single line drawings.
 
Company ID: 104118 - Click Here for Full Details
Product Lines:
Waste Gas Combustors and Incinerators, Oil and Gas Production Equipment including Non-Code Pressure Vessels, Free-Water Knockouts, Heater Treaters, Vaporizers, Filter Coalescers, Two and Three Phase Separators, Gas Production Units, Scrubbers, Blow-Cases, and Vertical Sand Separators. 
 
Target Markets:
Oil and Gas, Refining, Petrochemical, Processing, Metals and Mining, Landfills, and many other Industries where Air Emissions are Regulated. Other product lines in addition to about are included Oil and Gas Production, Manufacturing, and OEMs. 
 
Sales Opportunity:
We are a Combustion and Manufacturing Company known for Breaking the Status Quo, with nearly 80 years of combined experience in the Oil and gas industry. Our team members have completed major projects in Canada, USA, Cuba, Italy, China, Thailand, and Indonesia.

We are aggressively looking to expand our Territories and Market share. We will provide competitive commissions, marketing and sales support and ongoing product training. We are looking for individuals who have existing relationships with Oil and Gas companies in addition we can provide leads for cold calls
 
Company ID: 104100 - Click Here for Full Details
Product Lines:
Our Products include, but not limited to:
Architectural Doors, Windows, Framing Systems and Glazing Materials that resist Bullet, Bomb/Blast, Wind and Impact threats. 
 
Target Markets:
Need representation on the east and west coast of US. East coast is heavy government, municipalities and corporate physical security applications. West coast is focused on financial, corporate and municipalities physical security applications. 
 
Sales Opportunity:
Our company offers an excellent opportunity for a person interested in more complex applications with a higher dollar value. Central to the company's success is its consistent ability to bring our skills to bear on highly specialized and challenging problems. Our comapny maintains a versatile, multi-tiered product line including counter lines, glazing materials, bullet resistant panels, windows, doors, framing systems, aluminum channels, drawers, package passers, currency trays, shelves, and speak thru devices. Our systems can be found in a myriad of locations including banks, convenience stores, fast food restaurants, retail establishments, corporate centers, computer centers, utilities, industrial settings, prisons, bus and train stations, and government offices.
 
Company ID: 104097 - Click Here for Full Details
Product Lines:
Versatile, revolutionary instant setting, cold fluid applied, waterproofing restoration products and services. 
 
Target Markets:
Manufacturing, OEM, Industrial, Marine, Specialty Contractors, Roofing Contractors, B2B 
 
Sales Opportunity:
This is an outstanding opportunity to work with a recognized international company with a proven track record in the roofing and waterproofing industry, and is motivated to grow sales in the Southeastern United States market. The ideal sales partner will be experienced in and already selling complimentary products to the above target markets with lines such as waterproofing materials, repair products, roofing products, marine repair products, concrete preparation materials, maintenance coatings. Lucrative and exclusive sales & marketing territories are available all over the Southeastern United States.
 
Company ID: 104087 - Click Here for Full Details
Product Lines:
Our product is a combination of a stainless steel grease filter with a heat exchanger inside.

Our product is a Patented System. They preheat the ground water from 60 degrees +- to 125 degrees by capturing the heat from the cook line. 
 
Target Markets:
The target market is full service restaurants that use real plates and cutlery, restaurants that are doing 275 meals per day and above are the sweet spot. 
 
Sales Opportunity:
Sale reps shall have the opportunity to make at least $100k plus. A typical sales rep gets $700 per system which is paid 50% on signing of contract and the remaining 50% 48 hours after system install. The time from signing of contract to install is 2-3 weeks generally. There is absolutely no competition in this field as this is a patented product. There are over 800,000 full serve restaurants across the country. If you are looking to make a life changing decision this is the position for you. Endless opportunity to sell with no cap.
 
Company ID: 104083 - Click Here for Full Details
Product Lines:
Decorative PVC Single-Ply Roofing and Exterior Flooring Waterproofing Products Designed for Balconies, Decks, and Rooftop Patios. 
 
Target Markets:
Roofing Distribution, Building Materials Distribution, Trade Contractors, Architects, Consultants. 
 
Sales Opportunity:
Unique, low competition product that always attracts attention and makes selling enjoyable. Higher commission rates, Territories, full Technical support, training, and proven product.
 
Company ID: 96437 - Click Here for Full Details
Product Lines:
Oil Filtration Products Designed to Remove Solid and Liquid Contaminants, Extending Oil Drains, and Improving Engine Life. Innovative Green Technology with Huge Potential. 
 
Target Markets:
Small and Large Fleet Maintenance Managers- Trucking, Bus, Construction, Waste, Work Boats, etc. 
 
Sales Opportunity:
Established company founded in 2002. We pay 15% commission on the sale of products. Vast untapped potential in the owner operator market segment. Short sales cycle in Owner Operator and small fleet sector. High upsell potential after first sale or pilot. Repeat follow on commission stream due to proprietary products. Established customer base with numerous customer testimonials.

Limited direct competition. Company has a proven track record over the past 12 years with a loyal customer base. The fleet market is the next step in the growth plan. There are over 100,000 fleets in U.S. that would benefit from using this technology and the owner operator results will provide an excellent testimonial on products effectiveness.

Great opportunity!!!!

This Oil Refiner reduces need for periodic oil changes, keeps engine running with clean oil to extend engine life.
 
Company ID: 104068 - Click Here for Full Details
Product Lines:
Founded in 2005, ours is a Private Licensed Company Importing Decorative Bricks and Natural Stones, Decorative Stones, Decorative Planks, Stone Laminates, Wood Siding, and Accessories. 
 
Target Markets:
Wholesale, Home Speciality Retailers, Speciality Boutiques, Designers, Architects. 
 
Sales Opportunity:
Our company is new in the US market and our forward-looking stones and other wall sidings are selling well in Canada. We are looking for agents that has a wide distribution channel in natural stones or flooring products.
 
Company ID: 104053 - Click Here for Full Details
Product Lines:
A Complete Line of Wide Width Fabrics Imported from Italy for Use by Interior Decorators for Walls, Ceilings, and Furniture.

Also a line of Imported Wool Felt in 34 Gorgeous Colors. 
 
Target Markets:
Interior Designers, Architects, and the Hospitality Trades. 
 
Sales Opportunity:
Our company is an importer of Specialty Fabrics. The Italian Fabrics are all 10 feet wide and made on customized Jacquard Looms. The colors and designs are unique and the fabrics have a very competitive price point. The felt products competes with the industry leader at a price point that is 50% less. We offer marketing materials, social media usage, samples and a competitive commission structure.
 
Company ID: 101530 - Click Here for Full Details
Product Lines:
Industrial Noise Control Products such as Silencers, Noise Enclosures.

Do to Noise Standards All Plants in Canada MUST Meet the Noise Specifications Set by the Labour Laws. 
 
Target Markets:
Engineers, Contractors, OEM Manufacturers, and End-Users. 
 
Sales Opportunity:
Noise control regulated by labour laws. Our company is known around the world and has been in business supplying and designing noise control products over 31 years. Morse of our customer are fortune 500 companies. We have very few competitors. Our representatives are supported by in house engineers and computer programs plus joint experience of more then 50 years. The commission paid on sales is 10%. This is not a position for "order takers".
 
Company ID: 69288 - Click Here for Full Details
Product Lines:
We are a Manufacturer and Marketer of Synthetic Air Compressor Oils.

We Blend PAO, Polyglycol, Hydro-Treat, and Diester Basestocks for use in Rotory Screw and Recip AIR Compressors. 
 
Target Markets:
Anyone who uses Compressed Air or sells Air Compressors is a Target Market. These products are brought to market two ways: either Through a Distributor who represents an Air Compressor Manufacturer or Calling on Industry (End-Users). 
 
Sales Opportunity:
This is a golden opportunity for individuals who are looking for a new profit center. There is excellent profit in oil. We are pioneers in the air compressor oil industry. We bring 40 years of experience blending and marketing compressor oils. We will do what it takes to help you develop an oil business. Commissions run from 10% to 25%.
 
Company ID: 104008 - Click Here for Full Details
Product Lines:
Sheave and pulley products in 1 inch, 1-1/2 inch, 2 inch and 3 inch in several different configurations. The pulleys have been in production and sold for over 30 years. Save Systems manufactures a complete livestock ventilation system but we are expanding the pulley line thru Manufactures Rep's. 
 
Target Markets:
The pulleys are used mainly in the livestock ventilation, marine industry, military, and food process industry. The pulleys are branded under lifetime pulleys and are very durable. The sheaves are glass filled nylon and the metal parts are stainless steel. 
 
Sales Opportunity:
The product quality sells itself with little effort and the samples take up very little room. this would be a great add on product if you have the right customer base. Customers love to see new products and this line would open up new lines of dialogue. The commission structure is negotiable. We will be soliciting representatives in all 50 state, with our emphasize on livestock distribution stores, and OEM Manufacturing.
 
Company ID: 95253 - Click Here for Full Details
Product Lines:
Architectural: Fiberglass Reinforced Polyester (FRP) Cornice, Columns, Balustrade, Spheres, Cupolas, Spires, Domes (Interior & Exterior), Urethane Millwork.
Industrial Fiberglass (FRP): Automotive, Industrial, Furniture, Military, Consumer Products.

From Design to Production. 
 
Target Markets:
Sell to: Architects, Project Managers, Construction Companies, Designers, Engineers, Production Managers, Purchasing Managers, Municipalities, Small & Large Manufacturing Companies. 
 
Sales Opportunity:
We have 50+ years experience in design and manufacturing Architectural and Industrial products for Architects and Engineers across the USA. We have a new 68 page catalog of Fiberglass (FRP) items without costly tooling. Sales Areas open: NYC & NY State, NJ, PA (outside of Philadelphia area) DE, MD.Wash.D.C. New England states,mid-west.

Our company has a staff of Designers who have the ability and knowledge to assist Architects and Engineers in the planning and producing their projects. We use AutoCAD for all projects; providing prototypes and 3D modeling if required Qualty is standard.
 
Company ID: 103995 - Click Here for Full Details
Product Lines:
Framed Art for the Hospitality, Healthcare, and Corporate Markets. 
 
Target Markets:
Interior Design Companies that Provide Design Services to the above mentioned markets. 
 
Sales Opportunity:
We have been in business over 40 years and we carry the most complete inventory of artwork in North America including our own proprietary artwork created by our in-house group of artists. We are not a retail gallery selling to the public. We sell art not artists. We frame what we sell in our onsite factory. We crate and ship worldwide and we can if asked, provide delivery and installation for larger installations or sub contract those services to local trades. Generous commissions relative to other companies in our industry to qualified well connected sales agents.
 
Company ID: 103980 - Click Here for Full Details
Product Lines:
Machining of Molds for Prototype and Prototype Sheet Metal Tools. 
 
Target Markets:
Anyone who need machining work done 
 
Sales Opportunity:
We are a service shop. We do machining for large companies that have over flow. We mostly cut tool that are designed already and most material is supplied. We also so cut for aerospace.
 
Company ID: 103954 - Click Here for Full Details
Product Lines:
Stocking items include: Shoulder Screws (.001 Tolerance, Various Materials), Dowel Pins (.0002 Tolerance, Various Materials), Thumb Screws (Knurled, Slotted, Washer Face, 303SS), Thumb Nuts, Spacers, Standoffs, Captive Panel Screws, Hex Nuts.

Specials per Print from 1/16" - 1-1/2" up to 4" long. 
 
Target Markets:
Distributors. 
 
Sales Opportunity:
We are looking to build upon our existing customer base by adding representation in areas that we currently do not have any as well as adding new customers in areas where representation may already exist. We offer attractive commission packages to reps for all new customers that they bring to our company. All current customers that do not currently have representation will be treated on a case by case basis.
 
Company ID: 88017 - Click Here for Full Details
Product Lines:
Our Patented Egress & Community Arrangements Attach Rental Units to Homes in a Way that Provides the Homeowners and Renters with Separate Outdoor Communities.

The Homeowners and Renters Never See or Encounter Each Other. We License our Patent to just One Exclusive Builder Per Market. 
 
Target Markets:
Potential Licensees include any Residential Developer(s) of Homes, Condos, Patios Homes, Twins, Duplexes, Townhouse/4-Plexes or Apartment Communities. Other Candidates are Developers of Retirement Communities or Assisted Care Facilities, REITs, and Large Investor/Owners of Real Estate. 
 
Sales Opportunity:
We will charge a licensing fee of about 6% of the sale price of each home in the community. Each home is expected to sell for more than $400K. So our fee will be around $24,000 per home. Each community is expected to have about 30 homes. 30 homes x $24,000 = $720,000 licensing fee per 30 home community. We are offering ground level reps a 20% commission, or $144,000 for the above community.

What's more, each client you sign on will likely pay licensing fees (and commissions) for the life of the Patent until June of 2034. We expect each client to build several communities per year or about 100 homes per year. Each client could be worth in excess of $500K in commissions to you per year. This is a huge product and a huge opportunity. We will sign an agreement that you get all future commissions for each client you sign.

You are responsible for the service of each client and all advertising and marketing costs. 1 years licensing fees are payable by the client at signing. We don't wait until the project is built. To be successful, you will need to meet face to face with owners of single family/multi-family and residential developers.

This is a huge opportunity but you must be willing to do cold calls every day and to put in 3-6 months worth of effort before expecting a payout. You are not required to pay or buy anything but you are encouraged to participate in 1 day of training in Lewis Center, Ohio with travel and lodging at your expense.
 
Company ID: 103894 - Click Here for Full Details
Product Lines:
THERMAL-ACOUSTICAL PRODUCTS MADE OF MOLDED FIBERGLASS 
 
Target Markets:
AUTOMOTIVE MFG 
 
Sales Opportunity:
MANY AUTOMOTIVE MANUFACTURES MOVING TO MEXICO. OPPROTUNITY EXISTS TO SELL INSULATORS FOR AUTO HOODS, BULKHEAD, DOORS, MUFFLERS, SEWN THERMAL INSULATORS.
 
Company ID: 103893 - Click Here for Full Details
Product Lines:
Large Industrial and Hotel Refrigeration Units Custom-Designed Designed In-House and Often Installation Included. 
 
Target Markets:
Engineers and Builders of Large Hotels and Other Buildings, to NASA and other Government Agencies for Applied Cooling or Research and Sub-Zero Temperatures. 
 
Sales Opportunity:
Our company has done jobs and supplied specially-designed heavy cooling equipment, including petroleum vapor recovery to Asian and European countries and is headquartered near Sydney, Australia. Have bought from USA large air coils as part of their international work. They wish to start in the USA in Houston, Texas area. A director of the company will visit Houston in late February and wishes to talk to an interested party who understands the refrigeration cycle and business. Company dates back to 1975. Solid group.
 
Company ID: 100163 - Click Here for Full Details
Product Lines:
Complete Line of Synthetic Roofing Underlayments with a Unique Best in Class Slip Resistant Surface. 
 
Target Markets:
All Roofing Supply One-Step and Two-Step Distributors. 
 
Sales Opportunity:
Our company is based in British Columbia, Canada and we are now seeking to grow our business within the United States. We are looking for seasoned representatives with contacts within the roofing materials supply industry who are looking to grow their business. We manufacturer and distribute a full line of synthetic roofing underlayments with a patented slip resistant top surface that have been proven to be effective in all weather conditions.

We offer a combination of price and performance that will be compelling to your customers. We offer competitive sales commissions, product support and marketing and are looking for qualified regional independent sales representatives throughout the United States. We will also provide a monthly territory development allowance for the first 6 months in any new region.
 
Company ID: 103856 - Click Here for Full Details
Product Lines:
Roofing Underlayments. 
 
Target Markets:
Distributors - Roofing & Building Materials. 
 
Sales Opportunity:
Looking to add independent sales reps to our fast growing team. Responsible for selling our complete range of synthetic & self-adhered underlayments in the territory.
 
Company ID: 103838 - Click Here for Full Details
Product Lines:
Metal Fabricated, Machined, and/or Assembled Products. 
 
Target Markets:
Contractors, Manufacturing Firms, Individuals. 
 
Sales Opportunity:
Our company is a full fabrication facility. We handle structural fabrication, custom fabrication, and high quantity parts. We also have a growing machine shop. We are looking for an outside sales rep to find work for both our fabrication and machining facilities. Scope of work includes structural, industrial plant process equipment, custom fabrications, custom machining, production run parts machining. We currently do not have any specific product lines, but we would definitely be open to being an outsource for specific product manufacturing.
 
Company ID: 103818 - Click Here for Full Details
Product Lines:
Outdoor Furnishings including Benches, Waste Receptacles, Ash Urns, Seating. 
 
Target Markets:
Landscape Architects, Owners, Government, Parks/Recreation. 
 
Sales Opportunity:
We recently unveiled our product line in the United States. Our products are manufactured in Buenos Aires, Argentina and we are in the process of finding quality representation in North America.

Our furnishing line is shipped to the United States and warehoused locally in Indianapolis, Indiana. We produce both stainless steel and cold rolled carbon steel benches (E-Coated and then painted with PPG coatings) that have a very contemporary flare, with a wide selection of vivid colors. When designing our line, our goal was to create a product that would compete with companies like Landscape Forms and Forms & Surfaces, at a price point roughly 20% less than their comparable products.

We have complete information and warehousing space for this exceptional opportunity. We structured our site with the specifier in mind, providing 2D, 3D and 3-Part Specs for each product. Our eCatalog is located on our homepage and can be downloaded for future reference. We sincerely hope that you will consider a partnership with our company and look forward to answering any questions that you may have about our products or company.
 
Company ID: 103779 - Click Here for Full Details
Product Lines:
Ours is Roof Cleaning and Roof Stain Prevention Products. 
 
Target Markets:
Roofing and Painting Contractors in North Florida, Georgia, South Carolina, North Carolina, Virginia, and Alabama. 
 
Sales Opportunity:
Our company is seeking experienced Manufacturer Sales Representatives & Distributors to work with us in expanding our network of Professional Roofing, Painting & Property Maintenance companies throughout Florida and Georgia.

We're looking for professionals with experience selling to established Roofing, Painting, and Property Maintenance companies - primarily those involved with managed communities such as Homeowner Associations, Condo Associations, and Apartment Communities.
 
Company ID: 10846 - Click Here for Full Details
Product Lines:
Custom Injection Molded Plastic Parts, Press sizes Ranging from 35 to 400 ton. 
 
Target Markets:
We Manufacture Quality Products for every Industry and for a Wide Range of applications including Automotive, Mechanical, Electrical Components, Household, and security. 
 
Sales Opportunity:
Our company has been in business since 1966, along with this comes much knowledge in Injection Molding. We are looking for Sales Reps to work with our current customers and expand our customer base. Our customers enjoy prompt personal customer service. We enjoy working close with our sales reps to provide any support they would need. Our commission structure is normal to the industry, with extra incentive to any new customers brought on.
 
Company ID: 103763 - Click Here for Full Details
Product Lines:
Our company Manufacturers Hydraulic/Pneumatic Accumulators, Bladder, Piston, and Diaphragm Accumulator Pressure are Available from 2,000 PSI to 20,000 and their Accessories.

Our product have ASME U-Stamp Certification as well as PED, ABS, DNV, and many Other Pressure Vessel Certificates. 
 
Target Markets:
We are looking for a Rep who's Specialty is Government Projects. 
 
Sales Opportunity:
We are a privately owned company that specializes only in accumulators. Our expertise: Senior leadership has over 100 years combined experience in accumulators. We have the largest inventory in the industry; “we deliver quickly”. Our prices are economic vs. the competition. We take pride in our prompt responses to customer requests. We are flexible and willing to take on unusual design requirements, “specials are our specialty”.
 
Company ID: 103748 - Click Here for Full Details
Product Lines:
We Make and Sell Stylish Retrofit Mirror Frames that Fit on the Existing Bathroom Wall Mirrors.

No Need to Take the Mirror Off the Wall, Saves Owners Money. 
 
Target Markets:
Hospitality Industry, Hotel/Motel Owners. 
 
Sales Opportunity:
We believe our products solve a problem for hotel/motel bathroom renovation. Why take down a perfectly good mirror, patch and paint the wall and then pay to buy a nice framed mirror to rehang in the same spot above the new vanity. Our retrofit frames cost less than a new framed mirror and you save the cost of patching and repairing the wall if you take existing mirror down.

We are not aware of any other companies doing what we do so we think the sales potential is huge if you are a rep selling hospitality bathroom products and/or design,remolding services. We would love to speak with you and commission structure is open for discussion.

Please submit a sales inquriry to us and we will show you before and after pictures of our products.
 
Company ID: 103730 - Click Here for Full Details
Product Lines:
Our Company Offers Branding Solutions for Companies with our Services that include Logo Imprinting Services such as: Screen Printing, Embroidery, Promotional Products, Signage, & Vehicle Lettering. 
 
Target Markets:
Contractors, Banks, Schools, Health Care, and Sports Teams. 
 
Sales Opportunity:
As our representative you will have the ability to offer complete Branding solutions to get companies noticed through our imprinted products. Become the "Go To" person for any co-pay wishing to promote their brand! Think about it, everywhere you look you will find something imprinted. Everyone needs your services.
 
Company ID: 103715 - Click Here for Full Details
Product Lines:
Major Wood Products Manufacturered in Bolivia is Seeking Representation.

We offer Lumber, Squares, Wooden Tiles and Flooring. All in Various Beautiful South American Species. European Management. 
 
Target Markets:
Lumber Distributors, Building Centers, Floor Manufacturers. 
 
Sales Opportunity:
Well positioned and well connected to the raw material, experienced management, and labor force. Seeking long term cooperation with reps well connected to the lumber industry, building centers and flooring manufacturers.
 
Company ID: 103714 - Click Here for Full Details
Product Lines:
Our product is a Prefabricated Metal Arch with a Consistency of Machine-Formed Radius/Radii.

It is an Alternative to a Wood Arch Traditionally Cut at Job Sites. 
 
Target Markets:
Primary Target Market is Homebuilders, including Multi-Family. Large Builders may Purchase through Subcontractors.
Secondary Markets are Remodelers and Building Material Retailers. 
 
Sales Opportunity:
Ours is a unique product for the home building industry. The founder created the product from applying metal forming experience used in metal parts produced for aerospace and automotive industries. We are seeking reps for 50 States, except for OH and Western PA. Our commission rate is 10%
 
Company ID: 103706 - Click Here for Full Details
Product Lines:
Rollformed Screen Bars for Window Industry. 
 
Target Markets:
Window and Door Manufacturers. 
 
Sales Opportunity:
Canadian based Companey selling product into U.S. Very competitive based on low Canadian dollar. You would approach all Window companies in your area and try to sell screen bar. Remember every window needs a screen. If we don't have the profile and the volume is there we can order tooling.
 
Company ID: 92874 - Click Here for Full Details
Product Lines:
We Offer a Removable Crown Molding/Wire Management System.

Our Product Provides the Customer with the Look of Traditional Crown Molding, and the Functionality of a Wire Raceway. 
 
Target Markets:
- Property Owners and Managers
- Apartment, Educational, Government and Office Buildings
- Hotels
- Hospitals
- Retirement, Nursing Homes/Assisted Living Facilities
- Contractors
- Audio/Visual Companies
- Builders
- Architects
- Contractors
- Student Housing
- Designers 
 
Sales Opportunity:
We have a new and unique product available that is currently being sold in the United States and Canada. Our molding can conceal many types of low-voltage wires including coax, fiber optic and fire/security alarm. The profile of the molding can be removed at any time to gain access to the wires behind it, and then simply be reattached.

Our molding can be used in both residential and commercial properties. Our molding is ideal in any buildings that contain long corridors, such as hotels, hospitals, government buildings, office buildings, MDU’s and retirement buildings. It is made out of PVC, which makes it lightweight and easy to mount to multiple wall substrates including concrete.

Because the base piece is adhered to the wall, there are many fastening options, which will not be visible once the profile is attached. Our crown molding can also be installed below the ceiling with accent rope lighting to give the effect of a tray ceiling, which enhances the look of catering halls.

Our product comes in four attractive designs, all produced in a white, semi-gloss finish and does not require painting; however, it is fully paintable. Our product is Patented and 100% made in the U.S.A. This product has been chosen to conceal wires for many commercial projects such as nursing homes, hospitals, apartment buildings and major hotel chains in New York, San Diego, Washington, DC, and Boston. Our company is a Certified SBE and WBE.
 
Company ID: 103692 - Click Here for Full Details
Product Lines:
LED Fixtures - Track, Recessed, Retrofit, Specialty. 
 
Target Markets:
Specialty Retail such as Jewelry Stores, Galleries, Retail, Salons/Spas. 
 
Sales Opportunity:
We manufacture high end LED fixtures made specifically for the Jewelry, Salon/Spa, Galleries, and general retail markets. We also have products for hospitality and genreral commercial applications. Our products are unique and cannot be found elsewhere as they are made industry specific. We are looking for a commissioned rep to sell our lighting products. This is a commission only offer which pays a generous commision. Sample products and literature will be provided.
 
Company ID: 103616 - Click Here for Full Details
Product Lines:
Precision CNC Machining
Highest Quality and Service
Prototyping
Tool Making
Stamping
Assembling
Welding
Fixturing 
 
Target Markets:
OEMs
Weapons Manufacturing
Seat Manufacturing
Any Manufacturing Machine Needs 
 
Sales Opportunity:
We need a salesperson that has a need to grow his portfolio. We currently support one of the largest aircraft seat with our manufacturing and are looking to expand our customer base. We have been involved with a lot of new part development in lighting for weapons. We also have assembling and production line support experience. We are looking for the right Rep to help grow our sales and diversify our customer base.
 
Company ID: 103683 - Click Here for Full Details
Product Lines:
Our company is the Worlds Leading Supplier of Engineered Laminated Wood Structures and wood Pole Management Products to the Electric Utility and Telecommunication Industries.

Laminated Wood Structures, Steel Trusses, Manhole Remediation, and Pole Raising. 
 
Target Markets:
We Primarily Sell to the Electric Utility Industry. These customers include IOUs, Municipalities, and Co-Ops. We also sell to the Telecommunications Industry. 
 
Sales Opportunity:
We are looking for motivated and highly engaged manufacturing sales representatives in the Florida, Alabama, and Georgia areas. We would like to grow and expand this territory. If you are looking to represent a honest, successful, and reliable company consider our company. We have a wide range of infrastructure products that can fit any utility.
 
Company ID: 103672 - Click Here for Full Details
Product Lines:
Premium Quality Wood Millwork Products
Stair Treads
Rail
Posts
Mouldings
Gable Ends Pre-Drilled
Side Gables for Kitchen Shops 
 
Target Markets:
Building Supply Stores
Commercial and General Contractors
Custom Homebuilders
Kitchen Designers/Suppliers and Renovators
Designers and Architects 
 
Sales Opportunity:
We are a recognized leader and supplier of premium quality wood Millwork products looking for a Sales Representative in the Pacific Northwest. We are a Canadian based company which makes our pricing very attractive to potential customers because of the greater than 30% exchange rate between the US and Canadian dollar.
 
Company ID: 98576 - Click Here for Full Details
Product Lines:
Vinyl Acrylic Soil Treatment that Cures Clear
Styrene Acrylic Soil Treatment which Cures Clear
Styrene Acrylic Soil Treatment which Cures Black
For Landfills as Approved USEPA 
 
Target Markets:
Road Construction, County Municipalities, Suppliers who Perform Dust Control, Individual Road Construction Companies that wish to Provide an End Result for a Road that will be Dust Free. Quarries and other areas that are high traffic and dusty. Parking lots repair and maintenance. 
 
Sales Opportunity:
Our company is the authorized agent for these products. These are unique products developed through the home company. We are a leader in designing, developing, and providing innovative solutions for the chemical world. Main difference between competitors product and our? Ours works!

We have a competitive pricing structure and will match or beat the competitor. Our products are environmentally safe and do not harm the environment. We offer literature and sales support to help you negotiate and close the deal. Training and sales support in the field is where we excel. Typical county agencies use one to two truckloads of material in a month during peak season. Each truckload would place $5,000 to $6,000 in your pocket per month. Looking for representatives all over North America.
 
Company ID: 103363 - Click Here for Full Details
Product Lines:
PTFE Basic Shapes including Standard and Custom Sizes, for Molded Sheets, skived Sheets, Tape, Extruded Rod and Tubing, Molded Rods, and Cylinder. 
 
Target Markets:
We Serve a Wide Range of Industries such as Construction and Bridges, Food and Beverage, Oil and Gas, Electronics, Automotive, Aerospace and Defense, Chemical, Energy, and Industrial. 
 
Sales Opportunity:
We are an established company with a proven track record and a stable and broad customer base across a variety of industries. Our customers range in size from large multinational companies to small machine shop fabricators and include OEMs, 1st and 2nd tier suppliers, and distributors.

We are seeking to expand our global customer footprint with the addition of highly motivated manufacturing representatives focused in the US West Coast and Canada to sell our products, grow business with existing customers, and develop new business opportunities. You will work closely with and be supported by a dedicated staff of business development and inside sales specialists. Commission structure is negotiable.
 
Company ID: 103558 - Click Here for Full Details
Product Lines:
Our products include Furniture, Lighting, Accessories, Wall Décor, and Rugs. 
 
Target Markets:
We do not sell directly to the public.Our target market includes Canadian Retailers, Designers, Architects, and the Trade. 
 
Sales Opportunity:
We are a fast paced sales agency with a fashion forward home goods package. We are looking for an eager sales representative to take over an existing client base in British Columbia and Alberta. The ideal candidate should be able to work independently have sales experience in the home decor market and be willing to travel.
 
Company ID: 102482 - Click Here for Full Details
Product Lines:
We are the most Technically Advanced Weather Technology Company in the World.

Our Core Product is a 5-year Monitoring Package for Homeowners. Our Meteorologists will Monitor their House, 24/7 for 5 years, and Alert Them if Any Kind of Severe Weather will Impact their House. 
 
Target Markets:
All Contractors, Manufacturers, and Suppliers that Generate Business When there is Severe Weather Damage.
This includes:
- Roofing Contractors
- Roofing Equipment Manufacturers
- Equipment Distributors
- Water Remediation and Restoration Contractors
- Paintless Dent Repair (PDR) Companies 
 
Sales Opportunity:
As a rep for our company you will be putting the power of the world's most advanced weather technology in the hands of contractors and resellers. It will allow them to be more competitive, differentiate themselves from their competition, and ultimately make more money.

Here's how it works:
- You introduce contractors and resellers to MetLoop's technology
- They begin offering it to their clients
- It can be sold as a stand alone offering or baked into their existing contract
- You make a commission from every sale they make
- We provide all the support, training, and marketing material

The Economics:
The 5 year monitoring package costs the contractor $75. However, they have the ability to sell it for more and keep the difference. For example, they could sell it for $100 and make $25 each time. Most resellers will simply include it in their contract and use it as a selling tool. As a rep, you would make a 15% commission ($11.25) on each sale (15% of $75 = $11.25).
 
Company ID: 52414 - Click Here for Full Details
Product Lines:
A Revolutionary Timber Frame Building System.

"The most Economical Solid Timber Frame Home on the Market. Period." The results are Remarkable, Economical, Attractive, Traditionally Styled, and Energy Efficient Homes. Buildings Available in Lodgepole Pine. 
 
Target Markets:
Sales Reps will be selling to Homebuilders, Cottage and Cabin Builders, Lodge Builders, Resort Builders, Vacation Homebuilders, Building Materials Dealers, Lumberyard Dealers, Real Estate Agencies, etc. 
 
Sales Opportunity:
You will be part of a very successful North American sales team selling in your protected territory for a well establish family own company. You will have full sales support along with literature and computized book catalogues. The beauty of our Timber Home is its simplicity–it goes together like “adult lego”: fast, accurate, solid, with no costly heavy equipment standing by.

Each timber is precision milled and is interchangeable with others of the same kind. Our Timber Home package arrives at the jobsite bundled and labeled and ready for assembly. You will be astonished how rapidly it goes up. With our manufactuers/rep agreement we pay top commission on all orders received within the sales representatives protected teritory.
 
Company ID: 96591 - Click Here for Full Details
Product Lines:
Faucet Repair Parts
Shower Repair Parts
Toilet Repair Parts
Connectors, Stops, Valves
Full Faucet Line
Full Commercial Faucet Line 
 
Target Markets:
Plumbing Wholesalers. Retail Stores. 
 
Sales Opportunity:
Our company is family owned and operated since 1923. We have customers in all 50 states and continue to grow each year. We will be able to train and help you adapt to the repair parts world quickly and accurately. Our company is also extremely well known in the industry. You will be given existing customers as well as plenty of room to grow and find new business. There is no ceiling.
 
Company ID: 101297 - Click Here for Full Details
Product Lines:
Web-Based System for Managing Manufacturing Tooling Assets - Software as a Service - SaaS - Sold by Subscription. 
 
Target Markets:
Manufacturing Business Owners and Stakeholders, Manufacturing Plants and Production Facilities e.g. Mines, Job Shops, other Fabricators that Use Custom Mission-Critical Tools, Plant Managers, Tooling Managers, Tool Crib Managers, Machine Shop Operators, Operations Managers, Production Managers. 
 
Sales Opportunity:
Supplement your lines with a targeted, valuable, management tool.

Our product is a web-based system for managing industrial tooling. Manufacturers that work extensively with tooling gain insights about their practices and processes. Our system is a window into how manufacturing plants, and other production facilities e.g. mines, job shops, other fabricators that use tools, operate.

Monitor:
Tool failures
Tool maintenance and servicing
Tool service life

Compare tool service life for tools from different suppliers.
Track tools nearing the end of their anticipated service life.
Team with tool suppliers to schedule and prioritize tool service.
Easily locate tools and check their status.

Our system operates on a subscription basis. Rep-generated referrals can produce commission revenue streams that last beyond the initial sale. We are looking for independent, commission-only, reps who can develop and deliver value propositions, provide warm leads and bird-dog prospects. We think light familiarity with our product is sufficient to pique prospect interest. No technical background is required. This flexible opportunity can be customized to suit a rep's desired level of participation in the process.

We think good fit reps are adept with independently discovering and pursuing opportunities.
 
Company ID: 103523 - Click Here for Full Details
Product Lines:
A Classroom Unit Ventilator that is Highly Energy Efficient (Heat Recovery) and also Incorporates the Technology of Ultraviolet Germicidal Irradiation, Providing the Classroom, Students, and Teachers the Cleanest of Environments. 
 
Target Markets:
Engineering Companies, Decision Makers, and Influence(er's) in the K-12 Marketplace. 
 
Sales Opportunity:
Our company is unique in that we are a custom stainless steel fabricator, so that we can accommodate the client/end-user in any of its specific needs. Whether it be shelving, cabinets, or filler plates, in addition to the unit ventilator. That way the complete installation is architecturally satisfying.
 
Company ID: 103520 - Click Here for Full Details
Product Lines:
Unique modular LED lighting for aquarium and reptile. Many mounting and controlling options. Wi-Fi for Apple or Android. In Europe 9 years and now here in America.
Scratch Removal Systems for Acrylic, Glass, & Acrylic Underwater for both residential and commercial applications. 
 
Target Markets:
Aquarium shops, Aquarium suppliers, Aquarium Service Companies. Reptile dealers. 
 
Sales Opportunity:
Get in on the ground up. Start up company new in America with a long history in Europe. We have two product lines very unique to both the retail and commercial aquarium industry.
 
Company ID: 103519 - Click Here for Full Details
Product Lines:
Complete safety glass manufacturer and supplier to the OEM industry including military vehicles, fire trucks, agricultural equipment cabs, heavy construction equipment cabs, etc. We also manufacture fire rated glass for the architectural, residential, and commercial door industry. 
 
Target Markets:
Any transportation and equipment OEM who requires special tooling, complete kits, aftermarket, distribution of specialty and safety glass as well as any door manufacturer who requires fire rated products. The biggest growth opportunity lies within 20 minute fire rated glass for the door industry. 
 
Sales Opportunity:
40+ year old glass company specializing in OEM and aftermarket glass to the transportation industry looking to expand our national reach. We have recently added a state of the art manufacturing facility which now also produces fire rated glass for the commercial and residential door manufacturers. We just experienced our best sales year over all and want to continue that upward trend.
 
Company ID: 99372 - Click Here for Full Details
Product Lines:
We have a Patent to a Vertical Support System and Currently we are Manufacturing an Innovative Line of Curtain Holders that Dress Up Any Window.

It can be Matched to Custom Cabinets and Interior Decorations or Used as Accent Pieces. 
 
Target Markets:
Home Depot, Lowes, Kirkland, Walmart, Target, Furniture Stores, Wood Accessories Stores, etc. 
 
Sales Opportunity:
This is one of a kind curtain holder product that serves as a primary element in the house, which are curtains, the product offers a wide variety of models, styles, colors, finishes, etc. It has very unique characteristics that make it look elegant and clean. Something that everyone would like to use to decorate their walls and match to house decor.

Either kitchen style and color, wood work, wood floor, or furniture. The product is an ever demanded product, As long as there are windows being put up, there is a very good chance people may want to use one of our many models and styles. Our curtain holder is very easy to install, plus curtains are very easy to put on and take off and it does not show any hardware.
 
Company ID: 103475 - Click Here for Full Details
Product Lines:
Offering Custom Pre-Engineered Steel Building Kits.

Each Custom Kit can be Customized with a Variety of Wall and Roof Colors and Profiles, Different Insulation Kits, many Different Architectural Accents, and Accessories. 
 
Target Markets:
Wholesale Distributors, Buying Groups and Co-ops, Retail Lumber, Retail Hardware, and Retail Agricultural Supply. 
 
Sales Opportunity:
Our company is focused on developing a wholesale market of pre-engineered steel buildings available to small contractors and DIY through retail lumber, hardware, and agricultural supply. Successful sales reps that develop a relationship with large wholesale distributors, buying goups, buying co-ops, and large retailers can enjoy a residual commission from the sales program. Our network of manufacturing plants provide the ability to ship across North America from various locations.
 
Company ID: 94082 - Click Here for Full Details
Product Lines:
Vinyl and Aluminium Windows and Doors: Single Hung, Awnings, Casements, Sliders, Patio Doors, Shapes, SDLs, Grids.

Higher-End Window Lines are Impact Rated. Complete line of European Tilt and Turn Windows which Feature Unique European Design and are Manufactured in Italy. 
 
Target Markets:
Our target groups are:
- Dealers
- Lumberyards
- Architects
- Investors
- General Contractors
- Multi-Family and Single Home Builders 
 
Sales Opportunity:
Be the only sales rep who can offer the best in North American window systems, as well as complete line of European window systems. No other window manufacturer has this depth of product available. Make a difference for your client with a unique window system, offering benefits to the clients and sales reps.

You will have a product to sell, that stands out from the rest in the market and saves time an money to your clients, while offering top European design, quality and execution. With our products you will have attractive pricing, excellent quality and support and timely delivery. We are are here to grow our business and will continue to develop our products to constantly offer new solutions on the market and stay ahead of the competition.
 
Company ID: 103305 - Click Here for Full Details
Product Lines:
Industrial Tanks & UL508A Panel Shop.

We Offer both HDLPE/XLPE Along with Extensive Processing Experience in all Sizes and Designs Including:
Vertical Storage Tanks
Cone Bottom Storage Tanks
Open Top Tanks
Horizontal Tanks
Double Wall Containment Tanks
Intermediate Bulk Containers (IBCs) 
 
Target Markets:
Water & Wastewater, Oil & Gas, Food & Beverage, Printing & Packaging, Pharmaceuticals, Paints & Coatings, Wine & Spirits, Lubes & Greases. 
 
Sales Opportunity:
Our rep firm is looking for additional reps to sell into our target markets. If you are currently selling into our target industries and want to work with us and our 15 years of experience then please respond to this solicitation. We are looking for professional representation who already has contacts into our vertical markets. We pay generous commissions.

We are a manufacturers rep firm who, with the support of our excellent industrial tank manufacturing company, has been servicing waste water and other industries for over 15 Years Our Rep Firm brings 15 years of tank/container experience to the table with multiple installs various industries.

We can provide a solid engineered solution for anything from Sodium Hypochlorite to Sulfuric Acid from 55 to 16,500 gallon. We work very closely with engineering companies every day to help them provide their customers with the best possible solutions to meet their needs. Along with tanks we also provide coating recommendations for all of the corrosive environments found in the municipal waste water industry as well as many others.

We also offer the services of our UL508A Panel shop. Custom or Standard Panel Shop capabilities for Power distribution, Process and motor control & VFD,PLC and GUI and Protective Relays.
 
Company ID: 103428 - Click Here for Full Details
Product Lines:
High Quality Engineering Components for a Wide Range of Industries in Critical and Super-Critical Applications many Materials including Alloy Steel, Stainless Steel, Duplex and Super Duplex Stainless Steel, Creep Resistant Steel, Heat Resistant Steel, Nickel Based Alloys, Cobalt Based Alloys, etc. 
 
Target Markets:
Manufacturers in Oil & Gas, Liquefied Natural Gas (LNG), Aerospace, Ships & Marine, Valves and Flow-Control, Power Plants and Turbines, Pulp & Paper Machinery and Mining and Earthmoving Machinery Based in Europe and USA. 
 
Sales Opportunity:
Ours is a 52 years old company and produces stainless steel and high alloy steel castings for various critical and super-critical applications. We have fully equipped plants with investment casting, Replicast®, Shell Moulding & Centrifugal Casting facilities including CNC machining capabilities. We have been exporting over 75% of it products for more than 30 years to countries all over Europe, North America as well as other countries in Asia and South America. Our company enjoys long term associations ranging between 10 to 30 years with most of its customers.

We offer components manufactured using our technologies which are the latest manufacturing technologies in the production of castings, especially in difficult to make alloys like Super Duplex, stainless steel etc. These technologies provide a much better alternative for Sand Molding processes as they reduce and eliminate various constraints and defects associated with the conventional sand molding process for manufacture of castings. With these processes, we are able to manufacture castings up to 5,000 kgs single piece with higher accuracy and improved quality, consistency and reliability than any other casting process for this size of castings.

Our unique technologies offer immense opportunities for our sales representatives. The target customers are mostly large corporates and the remuneration structure shall depend on the size and nature of inquiries and firm orders generated.
 
Company ID: 102110 - Click Here for Full Details
Product Lines:
USA Based Manufacture of Professional Task Illumination, LED High Bay & LED Vapor Tight Fixtures, and Magnification Tools within the Electrical, Industrial, Electronics Marketplace.

The line is Designed to Provide Distributors with a Comprehensive Offering of Lighting and Vision Solutions. 
 
Target Markets:
Industrial, Electrical, Electronic, and other Distributor Channels. 
 
Sales Opportunity:
We are looking for representation in regions around the country. Our product is a niche product that would be a good addition for someone looking to expand their offering.

Our products add significant value to both you and a distributors customers. Our products provide the following benefits to the distribution channel:
• Increased Leverage w/Customers – We provide your sales team with additional product coverage to enhance your ability to provide a one stop shop for your customers.
• Expand the departments your team calls on within a Plant – Industrial task work of all types, quality control inspection, laboratory work, bench work, visual color comparison, general vision enhance as the workforce ages.
• Expand your contacts – these units provide you with a way to differentiate yourself from the competition. If you desire, the products give you the ability to expand your offering through additional target customer contacts within your existing customer base.

I look forward to speaking with you. Please submit a sales inquiry to me today!
 
Company ID: 96943 - Click Here for Full Details
Product Lines:
Commercial Metal Roofing, Wall, and Architectural Metal Products. 
 
Target Markets:
Architects, Contractors, End-Users, Corporate Accounts, Building Owners, Property Managers, OEM's, Distribution. 
 
Sales Opportunity:
M&E has a long and storied history throughout the USA with a product line second to none. Our most current notable project is the New Apple Headquarters in California, which will be starting in 2016. We have added a new manufacturing site in Mesa, Arizona to support the increased demand for our products in the Western Region. As such we seek a direct company sales person to cover our new "Western Region" and be located out of AZ or CO. We also seek a Rep Agency for the Montana, ND, SD and Nebraska areas.

If this is an opportunity you would like to further discuss please submit a sales inquiry/Resume to me. Time is of the essence in this matter as we are looking to move quickly. This is a demanding industry and our expectations are VERY high! If you are the laid back, I'll get to it tomorrow, individual, please do not apply!

However, if your up to the challenge and want to have high income potential, I want to hear from you! You must have some kind of experience in construction materials through the outlined channels. Roofing sales through the contractor/architect channels is what we are really looking for! If you have these relationships I want to hear from you!
 
Company ID: 103383 - Click Here for Full Details
Product Lines:
Tile, Stone, Concrete, Masonry Sealers
Tile, Stone, Concrete, Masonry Cleaners
Stone and Grout Enhancers
Concrete Prep Solutions 
 
Target Markets:
Ceramic Tile & Stone Distributors
Stone Manufacturers
Tile Manufacturers
Stone Fabricators
Concrete Supplies Locations
Architects 
 
Sales Opportunity:
Sales reps wanted. Substantial growth and expansion requires additional experienced manufacturer’s representatives for the United States and Canada for environmentally friendly and innovative product line of tile & stone sealers and cleaners.We are manufacturers of innovative sealers and cleaning products that are low VOC’s and environmentally friendly. We specialize in products for the tile, grout, and natural stone industry and equally innovative products for concrete, masonry & unfinished wood.
 
Company ID: 101618 - Click Here for Full Details
Product Lines:
Safety Signs, New Patented, Motion Activated, Flashing Lights, and Voice Warning Sign.

Proven to Reduce Accidents and Liability Claims. Easy to Sell with Great Value Proposition. Developed Product Line. 
 
Target Markets:
Safety Professionals at Medium to Large Enterprises. Exceeds OSHA.
Manufacturing Companies, Big Box Retailers, Federal and State Government buildings, Oil and Gas, Hospitality, Medical. Anywhere that a Sign Needs to Really Make People Take Notice. 
 
Sales Opportunity:
New concept everyone is interested in. It's a new product that will help you get in front of your regular customers with a new idea to help pull through of existing product lines

20% commission on first $100,000 for invoiced sales direct to customers.
12% Uncapped after first $100,000 sales.
The 20% renews on anniversary each year.
8% on distributor/reseller sales.
 
Company ID: 88309 - Click Here for Full Details
Product Lines:
Synthetic Roofing Underlayment. Full Line of High Performance Synthetic Roof Underlayment, and High-Temp Self-Adhesive Peel & Stick.

Features High Performance Anti-Slip Foot Traction Top Walking Surface and Proprietary Formulated Skid Resistance Bottom Coating that Prevent Movement on the Roof Deck. 
 
Target Markets:
ABC, Allied, Beacon Group, Roof Supply Group, SRS, Lumber yard, and all Roofing Supply 1-Step and 2-Step Distributors. 
 
Sales Opportunity:
Our company leverages cutting edge plastics engineering to bring you long lasting solutions for water proofing and building protection. Our product line of synthetic underlayments and synthetic envelope products offer maximum safeguard against the worst conditions.

Our innovative engineering also provides: cost savings, product durability and safety for installers. Our product lines has been accepted in few national major roofing supply chains with established corporate and rebate programs. We are expanding very quickly and seeking for qualify reps to fill open territories.
 
Company ID: 100583 - Click Here for Full Details
Product Lines:
Indoor & Outdoor Commercial, Industrial, Residential LED Lights. 
 
Target Markets:
Contractors, Electric Distributor, Wholesaler,Energy Consultants, Commercial Real Estate Management. 
 
Sales Opportunity:
Our company has been in the LED lighting business since 2009 with offices in Houston and Southern California. We design and manufacture innovative LED lighting fixtures based on our customers' needs. We are seeking qualified lighting or electrical sales agents/reps with territorial or vertical market sales channels in commercial lighting fixtures, explosion-proof and classified lights (Class 1, Division 2), highway high mast lights, parking lot and area lights, industrial high bay and wall packs, etc.

Here are three GREAT reasons for you to consider joining our family:
1. Products
2. Pay
3. People

1. Great Products, we manufacture high quality industrial and commercial LED lighting products. Most of our designs are generated by requests from our customers. Some examples: 480V Industrial grade lights, Classified lights, Gas Station Canopy lights, High Mast lights ranging 850W to 1600W LED! Stadium lights. We continue to challenge the world and lead the industry by introducing novel and practical products.
2. Great Pay: Because of our product line, you will enjoy more sales and higher pay.
3. Great People: We have a dedicated inside team to support you with technical help, warranty issues, computer simulation, layout, marketing materials, after sale services, returns.

We look forward to great partnership with you.
Life is so beautiful, is your light capable?
 
Company ID: 103338 - Click Here for Full Details
Product Lines:
We Manufacture Fiberglass Products for the Automotive and Marine Industry.

Our products include Component Car Bodies and Classic Truck Parts. We Mmanufacture Component Cars including a Cobra Replica and 2 Hot Rods. Our Plant is Involved in All Aspects of Fiberglass Products from Blueprints. 
 
Target Markets:
Automotive Aftermarket Distributors Specializing in Classic Ford Trucks. Any Marine Application Needing Fiberglass Production. Any Industry Needing Fiberglass Manufactured from Existing Molds or Creation of Specialized Products. 
 
Sales Opportunity:
Our plant in Mexico 12 miles South of San Diego offers high quality products with competitive pricing while still dealing with a US based company. Commissions will be on a percentage of profit on an individual basis. Our range of existing products are well known in the marketplace and easy to sell. Automotive distribution Nationwide is what we are seeking. Any reps with connections in the Hotrod world would do well with our products.
 
Company ID: 103327 - Click Here for Full Details
Product Lines:
Rustic Solid Wood FIREPLACE MANTELS. 
 
Target Markets:
Retail Lumberyards, Home Builders, Trade Shows, etc. 
 
Sales Opportunity:
Continual income opportunity. Commission will be paid on all future stock orders placed by resources you've contributed. Easy to sell and reorders come easy.
 
Company ID: 103325 - Click Here for Full Details
Product Lines:
Thermosets, Thermoplastics, Fibrous, and Metal Materials
Plastic Injection Molding
Rubber Molding
Cast Foams
Formed Fibrous 
 
Target Markets:
Power Sports, Agricultural, Construction, Rail, Aerospace, Electronics, Stationary Power. 
 
Sales Opportunity:
Engineered products for component and system levels through leveraging the versatility of materials including: thermosets, thermoplastics, fibrous and metals to optimize product functionality.
 
Company ID: 103320 - Click Here for Full Details
Product Lines:
Steel Fabrication, Plasma Cutting Services, Sheet Metal Rolling, Structural Steel Rolling, Welding Services. 
 
Target Markets:
All Companies and Organizations which are in Need of Fabricated Steel Structures and Related Services. 
 
Sales Opportunity:
We are renown for our quick delivery times, high quality and reasonable prices. We are a very flexible company and able to adapt to customer requirements. Commission rates between 7 - 10% on successful orders.
 
Company ID: 103321 - Click Here for Full Details
Product Lines:
Undershelf and Personal Task Lighting Targeting the Office Furniture Dealer and A&D markets. 
 
Target Markets:
North Texas (Dallas), West Texas, Oaklahoma. 
 
Sales Opportunity:
Get on-board with the latest wellness and energy savings product line in the world - office lighting. Our company is the leader in undershelf and personal task LED and fluorescent fixtures. Well developed territory. Fantastic opportunity to enhance your current ergonomic/wellness package and/or focus on the hottest employee productivity enhancement product available. Join our national team in delivering innovative products and rapid technology solutions to the office furniture industry.
 
Company ID: 103292 - Click Here for Full Details
Product Lines:
Our Company Specializes in Rain Water Harvesting Products including Diverter Kits and Hardware, plus 50 and 100 gallon Very Unique Modular Rain Barrel Systems.

We have an Entire "DIY Rain Barrel EndCap". 
 
Target Markets:
Lawn and Garden, Big Box Stores, Independent Lawn and Garden Centers, Architects. 
 
Sales Opportunity:
Rain water harvesting is one of the fastest growing trends in Lawn and Garden with 87% average growth per year (ref. ARCSA). As city water costs increase and many areas of the country face widespread drought, stores and consumers are looking for solutions to conserve water. Our Rain Barrels come in a box, are affordable to ship, and can be expanded from 50-10,000+ gallons of water.
 
Company ID: 100323 - Click Here for Full Details
Product Lines:
We are the Largest Manufacturer of Tool Holders & Collets like ER, DA, TG, OZ Collet Holders, Endmill & Facemill Holders, in CAT, BT Tapers, & other Machine Tool Accessories.

Full Cutting Tool line is also Available like Carbide Inserts and other Cutting Tools. 
 
Target Markets:
Machine Tool Accessories Distributors & Dealers, Large & Small Machine Shops, Tool Holder Manufacturers, Catalog Houses, etc. 
 
Sales Opportunity:
Our Strengths:
• We use high quality Spring Steel Raw Material imported from Europe.
• Our Machines are high precision imported from Switzerland.
• We facility is export oriented and we export to USA, Japan, and European Counties. We supply collets to OEMs.
• Manufacture with Swiss technology, We manufacture Inch and Metric both sizes.

We have 30+ years of experience in manufacturing collets and holders. One stop supply for machine tools accessories & cutting tools. Our products are already very well accepted in USA & Europe with very reputed catalog houses & OEMs. They sell our products under their own brand names.

We have 30+ years experience in Collet Manufacturing. We maintain a large inventory for ready delivery. Transit time from India to USA is only 3 to 5 days by air, door to door. Commission structure is negotiable. It is generally 5% to 10%. Please feel free to submit a sales inquiry to me with any questions. Thank you.
 
Company ID: 102692 - Click Here for Full Details
Product Lines:
Hydro Excavation Equipment, Underground Utility Equipment. 
 
Target Markets:
Underground Utility Construction Companies, Municipalities, Fence Installers. 
 
Sales Opportunity:
We are looking for a sales rep to sell our line of hydro vacuum, hydro excavation equipment. We offer a quality product at a competitive price. Our equipment is used by major utility construction companies and smaller independent companies. We offer sales support, custom products to satisfy our customer's needs and a great reputation for quality and service. This is a commission only opportunity with unlimited potential for growth. We are expanding our product line and want a motivated sales rep familiar with the underground construction industry who will grow with us.
 
Company ID: 82440 - Click Here for Full Details
Product Lines:
Cleaning Supplies & Equipment, Wire & Cables, Safety Products, Gloves, Environmental Products, and Containment Products. The Goverment buys millions of dollars os this products.

With A GSA# you can sell any products that the Government wants. 
 
Target Markets:
All Military Bases, Hospitals, State & Federal Buildings, Schools, All Colleges, Federal & State Prisons. 
 
Sales Opportunity:
Because my Company is a small business & A Disabled Veteran Company, Approximately 30% of purchases must go to Small Business & Disabled Companies. There are Many State & Federal Websites that post bids daily. I will give them a letter with permission and I will Pay Good Commissions.
 
Company ID: 103264 - Click Here for Full Details
Product Lines:
- EIFS/Stucco Exterior Cladding Systems
- Air & Moisture Barriers
- Specialty Coatings 
 
Target Markets:
Western Canada, with a Particular Focus on Vancouver, Edmonton, and Calgary. 
 
Sales Opportunity:
- World Leader
- Rapid growth expected for several years
- Company training and resources provided
- Atlanta tech support and North American office
 
Company ID: 103256 - Click Here for Full Details
Product Lines:
Recycling and Waste Bins, Manufactured from Recycled Aluminum, PET, HDPE Plastic, and Steel.

Product lines include: Cart Corrals, Halo Bag, Frame System, and also Customized Designs. 
 
Target Markets:
Schools, Universities, Landscape Architects, Zoos, Corporate Spaces, Parks and Recreation, Municipalities, State and Federal Government, Janitorial Supplies, Contractors, Waste Management Facilities, LEED Certified Facilities, Industrial Areas. 
 
Sales Opportunity:
We have a high quality, green product, that promotes sustainability and closes the recycling loop. They are stylish, functional, and educational in promoting and maintaining a clean and beautiful environment. This is an active market with great potential. We pay a 10% straight commission, provide promotional materials and will assist with sales closings. Other commission benefits will be discussed during interview.
 
Company ID: 103115 - Click Here for Full Details
Product Lines:
Railings - Aluminum, Glass, Picket, Topless
Patio Covers - Aluminum, Glass
Privacy Walls - Aluminum, Glass
Pergolas, Aluminum Powder Coated System 
 
Target Markets:
Distributors of Outdoor Decking Products and Home Improvements
Railing and Deck Contractors
Businesses who want to Add product lines or become manufacturers of railing 
 
Sales Opportunity:
This is a great opportunity as we are expecting this to be a banner year!
We have only been able to list some of the advantages to representing our product lines, just wait until you hear the rest.

Well established manufacturer with over 60 years in the business!
- Our products are top quality and fully engineered
- They are stronger than any welded system.
- Very competitive pricing
- Manufactured in North America
- The railing system is unique to the industry in that their screw together design makes for easy assembly for contractors and dealers. Custom made and come with computerized cut sheets for shop assembly
- Pre-painted lineal program keep freight costs extremely low
- We will provide full product training for reps and customers
- Our customers always become repeat purchasers

Outdoor living has never been more popular and our product lines are not only strong and durable but they look amazing!
 
Company ID: 103219 - Click Here for Full Details
Product Lines:
Based in New York City, our Client has a Long History of Design Innovation in the Accessories Industry.

They are Currently Seeking a Passionate and Entrepreneurial-Minded architectural Sales Professional to Drive the Growth of their Architectural Design Line. 
 
Target Markets:
Ideal Candidates will Possess a Proven Rrecord of Building Sales in the Architectural Design Market including a Thorough Understanding of the Requirements of Architects, Interior Designers, Furniture Designers, and Independent Sales Representatives. 
 
Sales Opportunity:
Candidates should have a minimum of 3 to 5 years of experience in the architectural design market with an emphasis on furnishings, hospitality design, and materials. Those candidates with experience managing multiple bid processes and order cycles of technical, design-oriented solutions in the architectural design market will be given top priority. This is a commission-only position, in a growth market with uncapped earning potential.
 
Company ID: 103213 - Click Here for Full Details
Product Lines:
We Manufacture an All Natural Hand Balm that Heals and Protects Dry, Chapped, and Overworked Hands. 
 
Target Markets:
Plumbing Supply, Electrical Supply, HVAC, Mason Supply. 
 
Sales Opportunity:
Great Commissions. Create Your Own Territory. Great product with huge potential. Virtually a new category in multiple industries that have a tremendous need for the product. Great training, sales support, merchandisng, samples, etc.
 
Company ID: 103203 - Click Here for Full Details
Product Lines:
A Family of Remote Control Lighting Fixtures.

The Patented "Laser Select, Radio Aim" Makes Adjusting Lighting from the Floor Safe and Effective. No More Retail Sales Staff Climbing Ladders to Re-Aim Lighting After a Display Reset. Available in Retrofit Styles for all Popular Track Lighting Systems. 
 
Target Markets:
Specialty Retail Merchandising and/or Operations Directly
National Lighting Distributors
Large Lighting Distributors 
 
Sales Opportunity:
Be a part of an exciting and exclusive technology. This line of fixtures is a natural "door opener." Using the demonstration kits, sales calls are fun and and effective. The safety angle is a real one as the "safety first" icon and link on the website illustrates. You will enjoy a 8% to 12% commission on sales in your territory.
 
Company ID: 103201 - Click Here for Full Details
Product Lines:
Fuel Systems Modules and Fuel Senders
Fuel Systems Modules and Fuel Senders for Industrial OEMs
Wire and Cable Harness and Assembly
Wire Forming
Tube Bending
Component Impregnation - Metal, Plastic, Wiring
Fuel Sender Designs
Metal Stamping and Bending, Secondary Operations
Fuel Sensors 
 
Target Markets:
Agricultural and Construction Equipment OEMs
Off-Highway Vehicles
Power Generation Equipment
Bus, Transit, RV
Fuel Tank Manufactures
Marine
Turf Care
Trucks 
 
Sales Opportunity:
Manufacturing operations located in central Mexico. ISO/TS-16949 quality assurance based system. 90 percent of products exported to USA/Canada. Lean Manufacturing operations. Value based cost system. 45 years of operations in Mexico. Design and engineering capabilities in house. Large product offering.
 
Company ID: 103190 - Click Here for Full Details
Product Lines:
UL LED Corn Cob Lights, 9W to 100W.
8", 12" and 16" Circline Tubes.
UL DLC LED T8 2ft and 4ft Tubes. 
 
Target Markets:
Commercial & Industrial Properties, Lighting Distributors, Residential, Contractors, Electricians, Property Management Companies, Any Business with a Potential Need for Energy Efficient Lighting Solutions. 
 
Sales Opportunity:
We are an OEM of LED lights, with a lumen that surpasses our competition. We are able to manufacture special requests and projects, while also keeping stock of our inventory in our NJ warehouse. We manufacture Corn Cob bulbs, Circline Tubes, 2ft and 4ft T8 Tubes in various colors.

We are continuously expanding and developing our product lines to include other popular items on the market such as LED strips for 2' x 4' Troffers. We offer a great commission as well as sending any inquiries we might receive to our reps if the inquiry is in their territory. We would like to work with our rep in creating a mutually beneficial relationship.
 
Company ID: 100812 - Click Here for Full Details
Product Lines:
Manufacture of Anti-Corrosion Lubricant Inhibitors and Treatments.

Our Products Provide Electrical & Mechanical Applications with Moisture Protection, Fretting Corrosion Protection, Surface Static Electricity Protection, Electro-Migration Protection, & a Lubrication Coefficient. 
 
Target Markets:
Industry targets include but are not limited to: Aircraft, Marine, Electronic, Electric, Waste Water Treatment Plants, Pulp Mills, Automobile, Heavy Equipment, Pumps, Motors. 
 
Sales Opportunity:
Looking for seasoned commission sales people with minimum of 3 years commissioned sales experience. Best of the Best! Chemical Manufacture with Department of Defense products looking to expand footprint within the DOD and private industry. A background check will be required.
 
Company ID: 102799 - Click Here for Full Details
Product Lines:
We are the Exclusive Distributor for a Business to Business VoIP Phone System Manufacturer in New York State.

We Offer Facility or Cloud Based Equipment and Services. 
 
Target Markets:
In the Span of 22 years, we've Sold and Installed All Types of Communications for most Commercial Entities. Every Company is a Prospect including your Existing Customer Base. Current customers include Manufacturers, Healthcare, Hospitality, Accountants, Attorneys, Government, Education, and more. 
 
Sales Opportunity:
We are looking for an independent, eager, efficient sales rep who has professional relationships with an existing client base. Each of those clients will need to upgrade their analog or digital phone system at some point, so they represent a backlog of potential customers. We will help you with marketing to those end-users.

In addition to wired telecommunications equipment and services, we provide wireless services, computer networking, IT hardware, and services along with remote managed services, at the customer's facility, in the cloud, or both. Periodically, we run promotions for free or reduced price IT equipment and computer networking services such as network scans to search for hidden and potential network problems.

Our commission structure is based on negotiated compensation percentage of top-line revenue and incudes monthly recurring commissions. What's more, we offer marketing and sales assistance along with collateral literature.

Some IT savvy would be helpful. The selected rep will train with our degreed IT engineers and may have as much or as little involvement in the sales process as they may wish.
 
Company ID: 103169 - Click Here for Full Details
Product Lines:
Composite bars, FRP structural tubing, FRP rebar. 
 
Target Markets:
Infrastructure, Civil Engineering, Building and Construction Contractors. 
 
Sales Opportunity:
Our sales are increasing to compete against steel and the failing infrastructure. New infrastructure funding announcements make it perfect timing to get into this opportunity. We offer a product that lasts longer, is safer, is lighter, and is now less expensive than steel.
 
Company ID: 102559 - Click Here for Full Details
Product Lines:
The BEST Electric Radiant Heat System on the market. Under the Wood, Tile and Shingle. 
 
Target Markets:
Flooring, Wood, Tile, and Under the Shingle Radiant Heat Markets. Calling on Daltile Locations throughout your territory. Designing the Product into Local Building Projects. New and Refurbish Work. 
 
Sales Opportunity:
We will pay some of the highest commissions on the sale of our product. The product is the easiest to sell and install. Need Rep Firms with Feet on the Street that can Train Daltile Service Locations throughout your Territories. Also need firms that can sell all of our products, Tile Heat, Floor Heat. This is very important. Willing to Pay Double Digit Commission on all product going thru your territory.

Need multi person Rep firms in the following states, Minnesota, Wisconsin, South Dakota, North Dakota, Michigan, and Kansas. Please reply and we will be in touch asap.
 
Company ID: 103124 - Click Here for Full Details
Product Lines:
Introducing a modular washing line that transforms from a contemporary wall feature to a functional clothesline. A solution that eliminates the need for environmentally detrimental tumble-dryers and provides a more functional and aesthetically pleasing living space. 
 
Target Markets:
Residential - property developers | architects | interior designers | builders | DIY market | Home Owner Associations | property management firms | property investment firms | serviced apartment firms | home improvement retailers 
 
Sales Opportunity:
If you have established relationships | networks with in the above markets this will be an amazing opportunity to introduce the worlds first designer clothesline.

In the USA alone there is 55 million tonnes of carbon emissions currently being emitted annually from the 97 million tumble dryers in use within the US. And each year there is approximately 1 million new homes being built.

Considering clothes dryers account for up to 7% of the household electricity usage, this product is the perfect solution for not only households In areas where the practice is banned as it is considered an unsightly nuisance to neighbours but more so ideal for inner city high density living is creating what can only be described as tumble dryer towers.
 
Company ID: 100930 - Click Here for Full Details
Product Lines:
We Design and Build Custom Wood Doors and Related Millwork for Luxury Projects around the country.

Entry Doors, Interior Doors, Garden Gates, Wine Cellar, Garage Doors, Sliding, Folding Patio Doors, and Related Hardware. High-End Tables/benches, Cabinets, Stair Parts, and Specialty Mouldings. 
 
Target Markets:
We Sell Direct to Custom Home Builders, Homeowners, and Market to their Designers and architects. Shipping Nationwide, Canada, Caribbean. Target markets include DC, Colorado, Idaho, California, Florida, Atlanta, Boston, NY/NYC, Texas. Targeting Large Sliding and Folding Door Systems. 
 
Sales Opportunity:
If you have strong relationships for selling building products to high-end, luxury home builders this will be an excellent opportunity for you. Projects can range from $10K to $250K per project in size with a 5% commission and bonus structure. Your customer should become repeat clients for us and regular paychecks for you. We don't have commodity products, we just need you to get us in-front of the right people and we will do all of the leg work to design and quote the projects. We have in-house, professional project management to support every job. Our quality exceeds anything in the market, we don't sell on price.
 
Company ID: 103099 - Click Here for Full Details
Product Lines:
- custom cable and harness assemblies
- Electrical box build
- Packaging and kitting
- Machining (outsource) 
 
Target Markets:
-O&G
-Medical
-Industrial
-Military
-Commercial 
 
Sales Opportunity:
All products manufacturer in the US (Houston Texas)
- Quick turn
- Prototype
- Small volume
- High volume
- Drawings/BOM creation
- Warehousing
- Distribution
- Rework
 
Company ID: 102437 - Click Here for Full Details
Product Lines:
Our product is a Deterrent for Garage Break Ins.

We have created a Plastic Shield that Inhibits "The Hanger Trick" a 6 Second Break In Method in Overhead Garage Doors. Our Slogan "Fit it and forget it". Easy to Install/Tools are Not Needed. No Maintenance. 
 
Target Markets:
Garage Door Companies, Home Improvement Companies, Car Washes, Homeowners. 
 
Sales Opportunity:
Distributors are taking advantage our Wholesale pricing and are having profits up to $50/item by adding installation charges. Some distributors have sold +500 devices in less than 45 days. A garage can be burglarized in just 6 seconds, no entries forced.
 
Company ID: 103079 - Click Here for Full Details
Product Lines:
Specialized fastener manufacturer
- Stainless- 316, 317L, A4 Class 50, 70, 80 - Duplex - Super Duplex – - Monel*- 400, K500 - Inconel*- 600, 625, 718 - Hastelloy* – C22, C276, B3 - Titanium- - Nickel- - Zirconium - Carpenter - Incoloy 
 
Target Markets:
Fastener Manufacturers, Distributors, OEM manufacturers, Importers 
 
Sales Opportunity:
Our conmpany has owned three manufacturing units based in UAE and India specializing in stainless steel and exotic grades fasteners with quick turnaround times and have low MOQ. We are stocking raw materials in special grades to ensure faster delivery.

We have our internal quality control team in the manufacturing facility with a in-house QC Lab. Also we have third party testing and inspections conducted in each batch of raw material and finished product to ensure we are supplying highest quality products. Also to support our distributors and manufacturers we are offering an exclusive service to stock their regular moving stainless steel and exotic material at our Houston Facility. We can work on excellent commission structure. The margins are high due to volume of business.
 
Company ID: 103037 - Click Here for Full Details
Product Lines:
Batteries, Chargers, Testers, Power Inverters, Solar Products, and more. 
 
Target Markets:
B2B Sales. 
 
Sales Opportunity:
Unique opportunity to be involved with a rapidly growing company. Our new exclusive products will make selling easy. We supply A leads and book appointments. No cold calls.
 
Company ID: 103014 - Click Here for Full Details
Product Lines:
Concrete Floor Cleaners, Diamond Impregnated Floor Pads. 
 
Target Markets:
Large Janitorial Distribution Companies, Janitorial Sub-Distribution, Grocery Retail, Logistics Companies, and Large Janitorial Contracting companies. 
 
Sales Opportunity:
As more and more floors become polished concrete, the traditional suppliers to the floor care world (Jan/San distributors) have lost significant market share due to decreased sales of floor finish and traditional floor maintenance supplies. They need to be presented with an opportunity to increase their product and solution portfolios so they can address the many floors their customers now have.

The only products that Jan/San distributors have available to address polished concrete is diamond maintenance pads sold to them as a commodity by manufacturers of traditional floor pads. These manufacturers offer no training on concrete floors and only participate in selling daily maintenance solutions without helping the distributors with a knowledge base for concrete floors in general, not addressing the minor restoration, interim maintenance and repair opportunities available, and not helping them gain a foothold in the industry.

Our company has the products, resources and solutions to bridge the gap between the concrete contractor sector and the general floor maintenance sector resulting in a company that will be recognized as a leader and profit center for Jan/San distributors wanting to recapture/increase their business, while providing new profit opportunity to the Janitorial industry.
 
Company ID: 102977 - Click Here for Full Details
Product Lines:
The Only Insole on the Market that Provides Gait and Motion Control, Patent Pending FLEX-ARCH Technology, and Full Frame Polyurethane Dual Density Cushioning.

Help to Prevent Foot and Joint Injuries, Reduce Plantar Fasciitis, and Enhance your Fitness and Training Abilities 
 
Target Markets:
Higher-End Sporting Goods Stores, and Big Box Retailers at the higher end such as REI, Footlocker, Dick's, Sports Authority, etc. 
 
Sales Opportunity:
Our insoles are biomechanically designed to be a true non-prescription functioning orthotic that incorporates not only preventive qualities to your feet, ankles, knees, hips and spine but also helps to enhance your training by returning energy to your actions as you train, run, or walk. The major competition has done nothing to upgrade the performance or materials of their insoles in over a decade, and only comes out with newer colors. Our insoles have raised the bar substantially by incorporating performance and orthotic features that no other insole companies have.
 
Company ID: 102972 - Click Here for Full Details
Product Lines:
Packaging and Bagging Machines

Can make Many Sized Bags from Same Machine, Very Flexible, and Change Length in Seconds, plus Offers Cost Savings Over Pre-Made Bags. 
 
Target Markets:
Plastic Injection Molders, Furniture Manufacturers, Machine Shops, Contract Packagers, Nuts & Bolts, Small Parts Manufacturers, any Company that Packages Products in Bags (Except Powders or Dusty Products) 
 
Sales Opportunity:
We offer some of the most flexible packaging and bagging machines in the country, most competitors only use pre-made bags which are more costly. Our machines can make any length bag required within seconds and widths from 1.7" to 23.6" wide. Width can be changed within minutes by changing the roll of film.
 
Company ID: 102968 - Click Here for Full Details
Product Lines:
Fuel Systems - Fuel Senders, Fuel Pumps, Fuel Modules Aftermarket, and OEMs:
Tube Bending and Forming
Wire Forming
Wire and Cable Assemblies
Metal Stamping
Impregnation 
 
Target Markets:
Agricultural and Construction OEM and Aftermarket
Off Highway OEM and Aftermarkets
Power Sports
Turf Care OEM
Mining and Forestry
Fuel tanks manufactures
Bus-Rail and RV Manufactures
Marine Boats 
 
Sales Opportunity:
We are a manufacturer of Fuel Systems and other support products for the automotive aftermarket industry. With 30 years plus, we are the primary supplier to the major aftermarket.
 
Company ID: 102965 - Click Here for Full Details
Product Lines:
Ours is a Stone Industry Group that is Focused on Building, Promoting, and Distributing our Business Brands Around the World Under a Long Term and Ethics Paradigm.

Combining the Strengths and Knowledge about Manufacturing and Distribution, in 2013 we founded this group. 
 
Target Markets:
Wholesalers, Distributors, Large Fabricators. 
 
Sales Opportunity:
We are willing to open new markets, after a very successful pentration in the USA and some European countries. We are looking for independent and well connected professionals that may have a huge opportunity for developing a unique and high end quartz line with very impressive differences to other brands.
 
Company ID: 101641 - Click Here for Full Details
Product Lines:
- Rust Removers
- Wall Preparation
- Cement Preparation
- Hardwood & Laminated Floor Cleaners
- De-Greaser
- Stain Removers
- Cerami-Pro
- Lime-Scale Remover
- Descaling of Coffee Makers
- Formulated for Automotive Industry 
 
Target Markets:
- B2B & B2C
- Big Box Stores, e.g. Home Depot, Lowes
- MRO Suppliers, e.g. Grainger, McMaster, MSC Direct
- Commercial Contractors e.g. Painting, Surface Preparation, Janitorial Services
- Supermarkets, for Home Use 
 
Sales Opportunity:
1 - Competitive, this product line is made in Canada and is currently a very good opportunity to bring it in to USA market because of the 30% US/CA dollar exchange rate.
2 - Private labling option.
3 - We're flexible & very easy to communicate with.
4 - In April 1992, Polytechnic school of Montreal made the study of scientific research about our products and the study reveals that our products are five times greater than anything you can find on the market. For several years and today still, our products are specified and used by deemed companies and engineer.
 
Company ID: 102953 - Click Here for Full Details
Product Lines:
Custom, Plastic Injection Molded Parts & Assemblies.

Press Tonnage from 40 to 1,000 Tons, Standard, Insert, & Over Molding, Sonic Welding, Pad Printing, and Secondary Assembly. 
 
Target Markets:
Automotive, Appliance, Lawn & Garden, Power Tools, Consumer Products, Aerospace, Non-Invasive Medical, Fasteners, and Electrical OEM Manufacturers, and their 1st Tier Suppliers. 
 
Sales Opportunity:
Our company is an ISO/TS 16949:2009 & 9001:2008 Certified supplier of custom, plastic injection molded parts. Located in the greater Louisville, Kentucky area (Jeffersonville, IN). Annual sales are $8.8 million, 60 employees, and 60,000 sq. ft. 60% automotive, 30% lawn & garden, 10% miscellaneous. Established 16 years, non-union, extremely competitive pricing, on-time delivery with a single digit PPM. In 2015, we achieved 100% ontime delivery. We operate on a 3 shift per day schedule and have open capacity.
 
Company ID: 102945 - Click Here for Full Details
Product Lines:
Lighting, Backlit LED Mirrors, Mirrors, Art. 
 
Target Markets:
Hospitality Industry, Large Retailers, and Commercial Accounts. 
 
Sales Opportunity:
We are a sourcing company offering contemporary décor products with the capacity for custom design. We will be happy to source any products that you may require. Note on our website that it is just a sampling of our design style and some of our capabilities. We are looking for people who have experience or connections in the hospitality industry as well as retailers and commercial accounts. We look forward to hearing from you!
 
Company ID: 102172 - Click Here for Full Details
Product Lines:
Patented, Patent Pending, & Proprietary Stone Coating Technology and Steel Roofing Accessory Products Used with Metal & Composition Shingle Rroofing Systems. 
 
Target Markets:
Nationwide Sales Availability Direct from Manufacture to Roofing Contractors. 
 
Sales Opportunity:
Roofing Industry Manufacturers Rep Agents Wanted!

Long established roofing industry developer of patented and proprietary technology products is expanding its business scope and has several openings for qualified manufacturers’ representatives nationwide. We are offering a unique opportunity of regionally exclusive territories with patented cutting-edge technology products. Strong manufacturer support and high commission rewards for industry professionals with positive and assertive mindset. Prefer direct to distributor and contractor sales experience.
 
Company ID: 102939 - Click Here for Full Details
Product Lines:
Personal Cooling, Heating Apparel, and Accessories. 
 
Target Markets:
Industrial Safety, Power Sports, Outdoor Retail, Sporting Goods, Specialty Retail, eCommerce. 
 
Sales Opportunity:
We are the worlds leading manufacturer of personal cooling and heating apparel and accessories. Our products include Cooling Vests, Cooling Head Wear, Heating Vests, Heating Gloves, Hand Warmers, and a wide variety of other items design specifically to offer comfort, protection, and performance.

We are looking for professional sales staff to help us sell our unique products to retailers in the following markets: Industrial Safety, Power Sports, Outdoor Retail, Sporting Goods, Specialty Retail, eCommerce. We offer training programs, marketing support, healthy commissions and much more. Please submit a sales inquiry us to learn more about this exciting opportunity.
 
Company ID: 102596 - Click Here for Full Details
Product Lines:
Aluminium and Glass Railings
Aluminium Windows and Doors, Curtain-Wall
Retractable Insect Screens
Our Product Line is of European Design and Quality. Alumila Offers Only the Best Quality Products 
 
Target Markets:
Distributors, Stores, Contractors. 
 
Sales Opportunity:
Our aluminium and glass railings are second to none in appearance and quality. We strive to deliver an excellent product on time. We offer our product at very competitive pricing. Our company has a full range of other products that may also be of interest to your clientele. We support our reps with full briefing on the product and offer any technical assistance that may be required. We also have a line of fenestration products: curtain wall, sliding doors, store fronts, windows - all high quality European design.
 
Company ID: 102348 - Click Here for Full Details
Product Lines:
Our company is a Leading Innovator of Commercial and Residential Home Automation and Smart Home Technology.

We manufacture the following:
- Water Leak Detection Systems
- Automatic Water Shut Off Systems
- Wireless Smart home Products
- Home Automation Systems 
 
Target Markets:
Target Markets are Property Managers or Landlords in Multi-Tenant Properties such as Apartments or Condos. Any Building that wants to Protect itself from Water Damage or Water Leaks. We are looking for Reps in major cities for the U.S., Canada, Europe, and Mexico. 
 
Sales Opportunity:
Every heard of a Smart Home or "Internet of Things" (IoT)? This growing market is already in the billions of dollars and growing at a exceptional rate. Our company is a leading innovator of commercial and residential home automation and smart home technology, is actively looking for manufacturer reps or agencies.

The selected sales rep or agency would have the best product on the market in smart home technology with full sales and marketing support. Our system is the ONLY true SMART wireless water automation system capable of stopping water leaks in commercial and residential buildings complete with iPhone Apps! Property damage from water leaks accounts for 62% of the property damage insurance claims by property owners. Our Systems stops water damage when a leak is detected.

We understand how to support reps and what it takes to help them succeed with:
- On site sales support
- Technical training
- Marketing

We are prepared to offer very lucrative commissions and market exclusivity for the right rep or agency for specific markets. The selected Rep or Agency will be Commission only.
 
Company ID: 101326 - Click Here for Full Details
Product Lines:
Head Lamps. 
 
Target Markets:
Hunting, Fishing, Farmers, Military, Law Enforcement, etc. 
 
Sales Opportunity:
We are looking for a rep company that knows the market, willing to learn new products, and are enthusiastic. We have a great head lamp that is on the market, so we are looking for a rep that can move our product. Our head lamp is rechargeable, 100 lumens, will shine 150 yards, and with many other great features. We have 9 line items that we sell.
 
Company ID: 102858 - Click Here for Full Details
Product Lines:
High-End Furniture, Modern, and Contemporary Style Furniture. 
 
Target Markets:
Architects, Interior Designers, Decoration Company, Hotels. 
 
Sales Opportunity:
Ours is an unique furniture manufacturing and design company who wants to present new style of furniture. Please submit a sales inquriy to us for more information.
 
Company ID: 102849 - Click Here for Full Details
Product Lines:
Architectural Form Release Agents, Sealers & Curing Compounds for the Concrete Industry.

We also Manufacture the Premier Industrial Hand Cleaner Created to Combat Cement Dermatitis and other Skin Conditions Affecting Workers in the Concrete Industry. 
 
Target Markets:
Construction Supply Stores, Construction Distribution Centers, Architectural Precast, Tiltup, Site Cast, & Ornamental Concrete Manufacturers, 
 
Sales Opportunity:
For over 65 years, our company has been an innovative leader in developing, distributing and servicing concrete form release agents, curing compounds, sealers, and other products for the concrete construction industry. At the core of our competency are superior-looking architectural quality surfaces − but we go beyond the surface to meet the complexity in today’s environmental landscape.

We are driven to continually provide eco-friendly products to responsibly and safely meet your production, environmental and OSHA requirements. Formulated from high grade virgin materials to produce consistent, predictable results − each product excels in specific applications and comes with a limited warranty. We serve the concrete industry throughout North America and around the world and is proud to be the preferred brand among concrete professionals since 1946.

We are seeking independent manufacturer representatives in several U.S. States and territories offering a commission on every sale. If you sell to the concrete construction industry and do not already represent a brand of architectural form release agent, submit a sales inquiry to us for additional information.
 
Company ID: 100948 - Click Here for Full Details
Product Lines:
Ability to Produce a Wide Range of Precision Machined Products including: Crankshafts, Eccentric Shafts, Scroll Shafts, Motor Shafts, and Pump Shafts. 
 
Target Markets:
Selling to Original Equipment Manufacturers (OEMs) in the following markets: Air Braking Systems, Air Conditioning, Air Compressor, Automotive Engine, Diesel Engine, Fluid Pumps, Gasoline Engines, Marine Engines, Metal-Forming Machinery, Oil & Gas Compressors, Oilfield Pumps & Refrigeration. 
 
Sales Opportunity:
A leading manufacturer of precision machined products that specializes in crankshafts for use in engines, pumps and compressors is looking for Independent Representatives to help promote and grow sales. We are a family owned, US based manufacturer with a longstanding reputation in the precision machined products industry for quality and service. We are ISO90012008 Certified and supply leading original equipment manufacturers throughout the world. We have the ability to produce large quantity production runs in addition to fulfilling service parts needs.
 
Company ID: 100174 - Click Here for Full Details
Product Lines:
Hydraulic Seals, Pneumatic Seals, Oil & Gas Seals. PTFE Seals, Polyurethane Seals, Rubber Seals. 
 
Target Markets:
Fluid Power, Hydraulic Cylinder, Pneumatic Cylinder, Oil & Gas Valve, Wellhead. Construction Machinery, Mining Machinery, General Machinery. 
 
Sales Opportunity:
Our company is located in Rancho Cucamonga, CA. We are one of the main seals manufactures in China. We provide oil & gas seals, hydraulic seals, pneumatic seals, seal manufacture machines, semi-finished materials. We do a lot of OEM and MRO business and provide products in metric and inch. All the parts we made in China and ship to USA.
 
Company ID: 102789 - Click Here for Full Details
Product Lines:
High-Speed Beer Dispensing, Beer Monitoring Management Systems, Growler Filler, Cold Room Monitoring, Tower & Video Screen Displays.

Our Products are Driven by a Computer Operating System, Providing Real Time Information on any Smart Device, 100% Keg Yield, Pouring Beer in Under 4 Seconds. 
 
Target Markets:
Stadiums, Ballparks, Arenas, Airports, Concert Venues, Convention Centers, Casinos, Hotels, Restaurant/Bars, Nightclubs, Resorts, Anywhere that there is Demand for Speed, Control, Data Acquisition in a Draught Beer System. 
 
Sales Opportunity:
Great selling opportunity, unlimited prospects with over 15,000 stadiums, arenas, ballparks, 600,000 restaurants, 65,000 nightclubs & bars. We are a young and aggressive company with over 20 years of experience in the beer and beverage dispense market. Our products are unique with Patents Pending that sell in an up or down market.

Support comes with comprehensive, ongoing product training, national marketing campaign for lead generation, trade shows, global advertising. Direct mail campaigns, marketing and sales material provided, CRM software provided, in field support product demonstrations. Great commission structure with uncapped commission.
 
Company ID: 102803 - Click Here for Full Details
Product Lines:
Our company is a Best-in-Class Digital Water Level that Delivers Fast, Accurate Results - even Around Obstructions. 
 
Target Markets:
Tradesmen in All Building Trades - Home and Building Contractors, Plumbers, Tile Installers, Floor and Deck Installers, Landscapers, Site Contractors, Home Inspectors, Foundation Contractors, Mobile Home Builders and Levelers, Masonry and Concrete Contractors, Pool Builders, and Home Handymen. 
 
Sales Opportunity:
We have a solid 19-year history of success primarily through web sales and trade shows with a big opportunity to market this product through distributors and retailers serving contractors, tradesmen and homeowners. Priced at about half the nearest competitor, our level has a better warranty and greater durability. Competition is relatively light, with only a few manufacturers offering similar products. Our company fills an important product gap for distributors and retailers, and offers greater profit potential than our competitors.
 
Company ID: 101696 - Click Here for Full Details
Product Lines:
Variable-Speed A/C Compressor Technology is the Latest/Best Method of Dramatically Reducing Commercial Energy Costs.

Our HELP System is an Add-On (Retrofit) Control Panel that automatically Turns Existing Single-Speed A/C Compressors into variable-Speed Operation. 
 
Target Markets:
We have Refined our Target Market to Customer Service and Sales Businesses. These include Car Dealers, Gyms, Theaters, Hotels/Motels, and Similar Facilities. Our Best Opportunities Exist where the Primary Energy Consumption is by Lighting and HVAC Systems. This is NOT for "Home" A/C Units. 
 
Sales Opportunity:
This technology was developed by a major international power company to reduce the energy consumption. This is the same technology used by major HVAC manufacturers and it has been marketed and in use in Asia since 2008 and in Europe since 2012. We began developing the North American market in 2010 when we won the InnoVision Technology Award.

Our first domestic installation was in 2011 by a major US manufacturing company. Following installation, an independent energy audit was performed by a major energy provider. This testing verified/certified an energy consumption (kWh) reduction of over 30%. This is a cost reduction of over $0.30 for every energy dollar (Previously) spent.
 
Company ID: 102776 - Click Here for Full Details
Product Lines:
Pulls and Knobs, Drawer Slide, Hinges, Kitchen Accessories, Wardrobe Storage Systems. 
 
Target Markets:
Hardware Distributors, Showrooms, Lumber, Closet, and Cabinet Makers. 
 
Sales Opportunity:
We are an overseas company with more than 45 years of experience in the Decorative Hardware industry and are expanding our operations in the United States. We are looking for experienced Sales Representatives across the country. We have great quality products at a competitive price. We stock all our products in South Florida so lead time for customers is short. Territories are exclusive and commission are very attractive. Inquire to get more information.
 
Company ID: 57494 - Click Here for Full Details
Product Lines:
Multi-Purpose First-Aid Kits
ANSI First-Aid Kits
Eyewash and Eyewash Stations
First Aid Cabinets and Refills
CPR and First-Aid Training Supplies
Quik Clot - Hemostatic Agent
Ben's Insect Repellent
Adventure Medical Kits
Afterbite
Custom Kits 
 
Target Markets:
Hardware Stores
Safety Supply Distributors
Industrial Supply Distributors
Contractor Supply Distributor
Government
Army
Any Advertising Firms/Companies 
 
Sales Opportunity:
We just hired a West Coast factory rep and we need industrial PPE reps for the entire west coast! This is a huge opportunity for any PPE rep as we have a very competitive line that also features some innovation that none of our competitors have. As our sales rep, you will have access to all of the products from all of our sister companies as well (below).

Our company manufacturers of the award winning productsl sold in all major stores and food drug en-mass. Also has top selling SKUs in Grainger, Orr Safety, Conney, with full OEM capability.
#1 selling outdoor retail first aid kits in virtually every sports, camping, and outdoor store in the US.
Leading ASI (Advertising Specialty Market) first aid company with full custom logo and cost kit capability with very fast turnaround time.
#1 source of training equipment and first aid supplies to the American Red Cross
Leading Industrial first aid company that specializes in ANSI OHSA first aid kits with full private label and custom kit capability.
 
Company ID: 102757 - Click Here for Full Details
Product Lines:
We are a Medium to Long Run Metal Stamping Shop.

We Also Manufacture Portable Loading Docks. 
 
Target Markets:
Manufacturing. 
 
Sales Opportunity:
We are a medium to long run metal stamping shop. We stamp 12 ga. to 3/8" grade 50. We do runs ranging from 5,000 pieces annually to over 1,000,000 annually.
 
Company ID: 99654 - Click Here for Full Details
Product Lines:
This is the World’s most Innovative CCVT Camera, Built Within a Light Globe.

Our Camera has been Developed to be Light and Extremely Portable and Fit any Standard Light Fitting). It was also Created to Provide Users with the Ability to Capture Mega Pixel 360 Degree Panoramic Camera. 
 
Target Markets:
There are far too many markets to state here, but if you start with: the Home, the Office, the Hospital, the Mall, the Chain Stores, Online Shopping Sites, and the list goes on. 
 
Sales Opportunity:
This is a combination of light globe, 360 degree camera, two-way audio, built-in recording, WIFI access and full remote control via the app. It uses SD Card to allow on-board storage (up to 10 days depending on the size of the card). It utilizes any existing WiFi network to allow you to live stream directly to your mobile devices via the internet.

The mobile app allows you look at the entire area of view, talk and listen to anyone there. Simply screw the device into an existing light socket and you have video security monitoring instantly. Do not be fooled by similar looking product on the net there is nothing like this product currently on the market. We are looking for "distributors" in all regions of the world and allocation will be first in first appointed, this product cannot wait to be launched, it must be launched now!

There is a huge market out there from MLM to direct home selling and everything in between. Resell it to Fry's, Walmart, or Sam's. Set up a new door to door business across the country, the choice is yours. As drop shipping will prove too expensive, you will require your own in-country warehousing and support structure for this project but the returns will out way this.

Distributor will be able to set their own selling price as our pricing is direct from us to you. That means no 10 or 15% it means $50-$75 or even US$100 profit per unit. We can even offer OEM service to the distributor upon request.
 
Company ID: 102703 - Click Here for Full Details
Product Lines:
We Own and Manufacture the New Type of Privacy Locks with "In-Use" and "Vacant" Indicator.

Our All-in-One Indicator Locks are Easy to Install, Fit Standard Doors, are Left and Right Side Reversible, and are Ergonomically Designed. Patent Pending. 
 
Target Markets:
We are Particularly Interested in Selling to Hardware Wholesale Distributors. 
 
Sales Opportunity:
We are currently selling only retail on our website, Amazon, Etsy and Ebay. Nevertheless, hundreds of businesses are using our locks. We are the only company which manufacture and sell the locks with indicators. Such businesses as Fire Department of Atlanta, Planet gyms of North and South Carolina and other small and large businesses installed and utilize our locks.

It is time to develop the wholesale component. Do not miss this opportunity to be the first to own the wholesale accounts, because every restaurant, doctors office, gym, accountant and lawyers offices,hotels, any business which has the single stole restroom may use our locks.
 
Company ID: 102678 - Click Here for Full Details
Product Lines:
Our company Manufactures a Complete Line of Plastic Drinkware.

We Make Thermal Tumblers, Protein Shakers, Barware Items, Pitchers, Shakers, Stemware, Shotglasses, Drinkware. We Manufacture Lighted Drinkware, Shotglasses, Lighted Pints, Cups, Stemware, Ice Buckets. 
 
Target Markets:
Reps would be Selling to Restaurant Chains, Gift Stores, Zoos, Theaters, Sporting Venues, Theme Parks, etc. 
 
Sales Opportunity:
We are a USA manufacturer making high quality plastic drinkware for over 30 years. We have the best lighted drinkware line in the USA. We always have inventory because we mold our own products. We have a full support staff, with dedicated customer service and art department to handle each order and program as placed. We are competitive with our pricing and ship on time. We offer a 20% commission on every order.
 
Company ID: 86806 - Click Here for Full Details
Product Lines:
Patented Ergonomic Equipment for Effortless Concrete Chipping and Drilling.

Works on Overhead and Vertical Surfaces that Boost Average Production up to 3X with Payback as low of 3 months or 3,250 sq ft of Chipping. 
 
Target Markets:
Concrete Rehabilitation and Restoration Industry, Concrete Repair, Parking Garage Repair, Bridges, and Structures Repair, Subways and Tunnels, Chimney Demolition. General Contractors for Concrete Repair. 
 
Sales Opportunity:
New Business Owners with a different approach to the market. New products to be launched 2016.

If you have access to job sites and construction contractors that are in the business of concrete repair on wall and/or overhead works for roads, bridges, and parking garages then we must talk. Due to an increasing worldwide demand, our team is looking for dynamic, committed reps, and organizations to better respond to these new business opportunities. Great commission structure. Excellent customer services support, live demo on job site. Please submit a sales inquiry to us.
 
Company ID: 102704 - Click Here for Full Details
Product Lines:
Architectural screens both roof top and ground mounted. 
 
Target Markets:
Architects and cities 
 
Sales Opportunity:
We are the market leader in architectural screens for the past 20 years. Professional grade products. In house design engineers. Professional install network. Diverse product portfolio.
 
Company ID: 102693 - Click Here for Full Details
Product Lines:
Our Company is a Manufacturing Facility in South Central Pennsylvania.

Formed in 1990, we Specialize in the Manufacturing of CNC Gear Products including but not limited to Gears, Shafts, Rotors, Spindles, etc. We are an ISO 9001 Certified Company. 
 
Target Markets:
Heavy Construction Equipment, Automotive, etc. 
 
Sales Opportunity:
Our company has been in business since 1990 manufacturing products form many well named companies. We has manufactured gears for NASCAR and John Deere to name a few. We would offer 5% commission on new business brought to the company. The commission would be added to the piece price when quoted.
 
Company ID: 102686 - Click Here for Full Details
Product Lines:
Furniture, Hotel Supplies, Hospital Supplies, Sports Goods, Fashion Garment, Textile Garments, and Safety Gears Industries (not limited industries). 
 
Target Markets:
Architects, Construction, Engineers, Hospitals, Hotels, Sports Glubs, Gyms, Oil & Gas Industry, Fashion Club. 
 
Sales Opportunity:
We are working as a Sourcing agent, Commercial brokerage, Public Relation, manufacturers representative, involved in furniture, hotel supplies, hospital supplies, sports goods, fashion garment, textile garments, and safety gears industries (not limited industries). let us know if you need anything from Pakistan.

Provide Professional Services:
~ Sourcing the best “quality” factories for clients
~ Negotiate best price and terms
~ Conduct Factory Inspections and Audit
~ Professional Services During Purchasing
~ Quality inspection service for our clients
~ Production Plan to support delivery date.
~ Inspect product prior to containers loaded.
~ Coordinate with client’s for their products to display in Exhibitions
~ Market products through different agencies
Please submit a sales inquiry for more details.
 
Company ID: 102679 - Click Here for Full Details
Product Lines:
Ours is 3D Software that Allows Woodworking Businesses to Design, Sell, Cost, and Plan Woodworking Projects.

The Software Runs with Both Windows and MAC OS Computers. 
 
Target Markets:
Our customers are Owners of Customer Woodworking Businesses, Case Work Makers, Office Designers, Custom Closet Providers, Furniture Makers, Cabinet Builders, and Remodeling Companies. Any Company that Provides Custom One Off Production Benefits. 
 
Sales Opportunity:
Potential clients of these woodworking firms have grown to demand high quality 3D renderings of proposed work. Without the ability to do this the woodworking businesses are doomed. Presently they are submitting hand drawn images, paying designers to do the work, or suffering in attempted to use complex CAD software. The production side of the sell it - build it process demands accurate shop drawings, parts lists, and material layout diagrams.

Our product provides all of the above. In addition because all functions are integrated, creating the design generates all needed reports automatically. This saves time and eliminates mistakes - lowering expenses. These business owners need to transition to computer based design and management to survive.
 
Company ID: 102669 - Click Here for Full Details
Product Lines:
Gutter Protection Products. 
 
Target Markets:
Lumberyards, Home Centers. 
 
Sales Opportunity:
Excellent add on products line. We ship same day, $100 orders, freight prepaid, 5% commission line. Presently sell most of the major Step 1 distributors nationwide through rep organizations.
 
Company ID: 102647 - Click Here for Full Details
Product Lines:
Custom Magnetic and Non-Magnetic Whiteboards Along with Graphic Design, Custom Chalkboards, 
 
Target Markets:
Hospitals, Universities, Corporate Supply Chain Systems, Architectural Firms, Interior Design Firms, OEM for Furniture, or other Product Distributors. 
 
Sales Opportunity:
The sales opportunities are endless. This is one of the highest quality whiteboard products on the market today. The entire product is manufactured in house to include custom frame options as well as unique graphics designed for every customer. Our in house design team will work directly with you or your customer in order to provide the perfect graphic. As the manufacturer we're also in a position to provide lifetime warranties on this product. Check us out online. Submit a sales inquiry to us to discuss the options available to you. We look forward to hearing from you.
 
Company ID: 102595 - Click Here for Full Details
Product Lines:
Wiping Rags and Cloths, New and Recycled Rags and Cloths. 
 
Target Markets:
Manufacturers, Auto Industry, and Sub Contractors, Maintenance Companies. 
 
Sales Opportunity:
The southern region of the United States is the fastest growing sector for the auto industry and their related sub contractors. Our comapny is a manufacturer of wiping cloths and rags. Our product line consists of both new and recycled wiper and rags. We manufacture and inventory a complete line of cotton, terry, and polyester materials.

Packaging capabilities range from 10, 25, and 50 pound boxes and compressed bales 25 and 1,000 pounds. With distribution centralized in Greer, SC we have the capabilities of just in time delivery requirements for South Carolina's upstate. Our company is not new to this industry, being grandfathered as far back to the med 1930's, we are the only wiper and cloths supplier in the Greenville/Spartanburg industrial area.
 
Company ID: 93522 - Click Here for Full Details
Product Lines:
* Industrial Cleaning Products & Specialty Chemicals.
* Industrial Cleaners & Degreasers, Bathroom Cleaners, Floor Cleaners, Glass Cleaners, Disinfectants, Drain & Sewer Line Cleaners, Hand Wipes, Carpet Care, Insecticides, Wastewater Treatment, Food Service Cleaners, Automotive, and Bus Maintenance. 
 
Target Markets:
* New B2B Brand for Commercial Accounts
* State & Local Government Agencies
* Municipalities
* Law Enforcement Agencies
* Housing Authorities
* Janitorial
* Cleaning Companies
* Distributors
* Healthcare & Dental
* Hospitality
* Food Service
* General B2B 
 
Sales Opportunity:
* We pay up to 20% commission on the sale of products.
* Products are industrial strength and are superior to the competition.
* We provide marketing materials.
* Over 55 proprietary products.
* Flexibility in distribution and delivery options.
* Private labeling available.
* Protected accounts in assigned territory.
 
Company ID: 21447 - Click Here for Full Details
Product Lines:
LED Flashlights
Rugged, Tactical, Waterproof
High-End Quality Mid to High Price Range
Aircraft Grade Aluminum, Multi-Modes
Every Day Carry Flashlights for Work, Recreation, Security, and Home
When the lights go out everybody needs a Tactical LED Flashlight. 
 
Target Markets:
Sporting Goods, Home Improvement, Big Box Stores, Purchasing Distributors. 
 
Sales Opportunity:
We manufacture and distribute a new line of high quality State of the Art LED Flashlights. They have features that appeal to the most discriminating shopper.

Features like:
100,000 hour lifespan
WaterProof
Up to 5 modes of light functionality.
Aircraft grade Aluminum bodies.
Tactical defense tips
State of the Art Electronics and recharging capabilities
 
Company ID: 98579 - Click Here for Full Details
Product Lines:
Fabricated Parts from Flat Sheet Metal to Completion.

We Supply Fabricated Components for our Customers in Regular and Stainless Steel in order for them to Complete their Asssemblies. We have Trumpf Lasers, Press Brakes, Turrett Punches, Welding Staions. 
 
Target Markets:
OEM Manufacturers, Automotive, Food Service, Any Manufacturer who Uses Metal Fabrication in their Assemblies. 
 
Sales Opportunity:
We are a 25 year old company with experienced personnel in the right positions. We deal with our cusstomers honestly, fairly and value communication with them and our reps so we get the job done right and on time.
 
Company ID: 102440 - Click Here for Full Details
Product Lines:
Distribution of High Quality LED Tubes & Bulbs Manufactured by our Company under our Own Brand. All the Products are UL, FCC, DCL, CE, RoHS, Energy Star Certified and have a Five Year Warranty. We Provide the Highest Quality Products at the Lowest Possible Cost. We ship from our warehouse in Florida 
 
Target Markets:
Our LED Products may be Sold to Anybody who Wants to Save on Electricity Bills and have High Quality Lighting in their Offices and Homes. LED tubes & bulbs are becoming more & more popular every year & we have very attractive price 
 
Sales Opportunity:
We offer a highly competitive compensation package with uncapped earning potential based on monthly sales. The amount to be paid will be a percentage of sales. After a brief trial period (1-2 months) we can offer a draw against commission.
 
Company ID: 102543 - Click Here for Full Details
Product Lines:
Swedish Made Brass Lighting, Switches, Outdoor, and Marina Equipment.

Although the Equipment's Primary Appeal is to the Marine Industry, it is Also Attractive for Home, Restaurant, and Commercial Use. Very High Quality and Rugged. 
 
Target Markets:
Retail Stores that Sell Lighting or Ornamental Brass Items. Marinas, Restaurants, and Home Design Companies, etc. 
 
Sales Opportunity:
The company that produces the product lines also makes industrial items that I import into Miami. They are asking me to warehouse the above mentioned products and to establish a path to market using a rep group. All items would be received into and warehoused in Miami, shipping directly to your qualified clients is our goal. My company does not show the product line on our site, please contact me for that info.
 
Company ID: 91017 - Click Here for Full Details
Product Lines:
Tire Casings Gel, Tire Sealant, Tire Rim De-Mounting Liquid. 
 
Target Markets:
Our products are sold to Truck Stops, all Heavy Duty Re-sellers, Fleet, Industrial/Agri Dealers and end users. 
 
Sales Opportunity:
Our company manufacturers only high speed tire casing product that does not have wheel balance problems in vehicles over 3/4 ton payload and over. We also manufacture products that self repair/prevent punctures up to 1/2"/12 mm in diameter.

At our company we are experts in “Tire Casing Care” (TCC). Most tire sealants only deal with punctures, but we deal with the heart of the tire " The Tire Casing" aka the tire Carcass. Our product is ideal for tire re-treaders concerned about an exposed air pocket/s after a tire has been fully re-treaded.

All of the liner products we manufacturer are biodegradable and non-toxic. Here is a test we did as per the tire manufacturers OEM standards. The test was conducted by ARDL a highly respected rubber laboratory that has been/is used by Good Year, Michelin, and Bridgestone for some of their testing as well. The test proves that we will retain tire pressure and protect a tire casing from heat and oxidation damage.

Our products are applied in virtually all applications over the road and off the road. We operate between -80F to 370F. It stops air loss, bead and rim leaks, and repairs/self seals up to ½”/ 12mm punctures permanently and will also seal rock tears/gashes up to 2-1/2”.
 
Company ID: 102333 - Click Here for Full Details
Product Lines:
We are a Canadian Furniture Company that Produces Rugged, Great Looking Furniture for the Toughest Environments.

We can Furnish Bedrooms, Dining and Common Areas and we Manufacture Commercial Mattresses in a Moisture Proof, Hospital Grade Vinyl Cover. 
 
Target Markets:
Suitable for Small Institutions, Group Homes, Fire and Rescue Stations, Camps. Anywhere that Tough Furniture (with a Residential look and feel) is needed. 
 
Sales Opportunity:
This line has been specified by the city of Virginia Beach for their fire and rescue stations for over 12 years. Until now we have not pursued other clients. In Canada we sell to a tremendously diverse client list; virtually any organization that buys furniture is on our target list.

Group homes
College residences
Fire halls
Ski clubs
Seniors residences
Camps
Private schools
Half-way houses
Shelters of all descriptions, etc.

In business since 1906, we know how to look after our customers and employees. (We consider independent sales reps in the same group as employees!).
 
Company ID: 102485 - Click Here for Full Details
Product Lines:
Our product is a Convertible Zero Clearance Circular Saw that Replaces Most of the Cutting Tools Used on Construction Job Sites today and is being Well Received by the Industry. 
 
Target Markets:
Construction Contractors, Wood and Metal Framers, Concrete Workers, Plumbers, Electricians, Remodelers, Professionals in most of the Construction Fields. 
 
Sales Opportunity:
As a former General contractor, I had an upper hand when designing this disruptive innovation for my field. We have had amazing results, feedback, and purchases from nearly every carpenter we can get this tool in front of. Our company is a veteran owned and operated company that has founded groundbreaking efforts in building a solution to solving homelessness for veterans. Our beginning product will revolutionize the way construction is today and appears to be well received by the industry. Named tool of the month in extreme how to magazine. Lets inspire each other!
 
Company ID: 102471 - Click Here for Full Details
Product Lines:
Our Company Prides Itself on Only Stocking the Highest Quality LED Lighting Products and We are Committed to Making sure you are 100% Satisfied with your Purchase.

For complete peace of mind, we Offer an Unrivalled Three Year Warranty on All our Spots and Bulbs. 
 
Target Markets:
GU10 LED Bulbs to MR16 LED Lamps as well as LED Spotlights & Recessed LED Downlights, even LED Floodlights & LED Strip-Lights are On Sale and In Stock here. 
 
Sales Opportunity:
Our company is the Uks leading online retailer for LED Light Bulbs, LED Bulbs, Fluorescent tubes, Energy Saving Bulbs, Halogen Light Bulbs, GU10 Bulbs, fire rated downlights and many more.
 
Company ID: 102448 - Click Here for Full Details
Product Lines:
Miniature Size Keychain Roll of Duct Tape of Various Styles and Colors. 
 
Target Markets:
All Major Chain Store Retailers. 
 
Sales Opportunity:
This product fits all walks of life in every demographic. Capable of manufacturing millions a month. Microcline is also in the process of manufacturing several other products. There is no doubt in my mind this product will sell by the millions monthly. Currently have two major retailers on board.
 
Company ID: 102427 - Click Here for Full Details
Product Lines:
Innovative LED Edge-Lit Light Panel.

All our LED Signs Integrate with our State-of-the-Art LED Light Panel to Make all Signs Slim, Bright, and Energy Saving. Our LED Light Panel can be Made in any Shape and Size to Fit Different Needs. 
 
Target Markets:
- Retail - Store Fixture and Display
- Architecture - Interior Design and Construction 
 
Sales Opportunity:
Ours is a new start up in San Francisco Bay Area. However, its parent company is based in Taiwan and owns 20 years professional experience in LED lighting manufacturing. We own four manufacturing facilities in both Taiwan and China for mass production. We offer high quality products and we have had successful experience in Asia in the past.

I can promise you that our products are way different compared to other sign manufacturers. Some major clients include: Panasonic, SONY, Walt Disney, TESLA, Samsung, 7-Eleven, EVA Airways, and so many more. These clients do not only use our LED signs as store fixture, some also integrate our LED panel with other products or equipment.

If you are a professional sale representative who has strong network in either retail fixture/display or architecture/interior design, you will dominate the market with our incredible products. Please send us email directly for further information: info at ledgacy com
 
Company ID: 101770 - Click Here for Full Details
Product Lines:
Industrial Inkjet Printers - 3 Technologies: Drop-on-Demand, Continuous Inkjet, and Hi-Definition. 
 
Target Markets:
Manufacturing Companies. 
 
Sales Opportunity:
We are the sole distributor in the USA and Canada for the this brand industrial inkjet printers. They have been manufacturing inkjet printers for 40 years in their facility in Italy and has product located in 90 countries around the world. Zanasi USA has been in Minnesota for 20 years and has hundreds of installations around the country and in Canada.

Our competitive niche is that we are the "go to" company when a customer has a one-off application. We take the "I wish I could" and turn it into "Look what we did". We will support the Rep with free training in Minnesota, literature, on-site demos, and any other tools necessary to support the selling process. Our commission schedule is lucrative and includes residuals for consumables.
 
Company ID: 102436 - Click Here for Full Details
Product Lines:
Closed Die Steel Forging up to 50#. 
 
Target Markets:
All Metal Working Industries. 
 
Sales Opportunity:
Looking for someone that is N and NE of Missouri. We are TS16949 Certified and do sell some OE Automotive and aftermarket automotive. But looking for new opportunities to expand our business.
 
Company ID: 102415 - Click Here for Full Details
Product Lines:
All Types of Cutting, Coring, and Sawing Tools and Equipment, Mainly Ones that Incorporate Diamonds.

We also Sell Safety Gear and Equipment to the Construction Industry. 
 
Target Markets:
Equipment Suppliers, Equipment & Tool Rental Houses, Construction Supply Houses, ie. Ready Mix Plants, Lumberyards, Brick Yards, Nurseries. 
 
Sales Opportunity:
We're an international distributor of over 20 different manufacturers. We are North America's largest diamond tool distributor and have been around for over 28 years. We're looking for reps that can bring us into the market segment that we have left untapped. We're willing to stock merchandise for our retailers and work out special agreements with certain product lines so they'll sell others for us. We're a wellknown name, and our Brand is a household name with our best selling product line.
 
Company ID: 102409 - Click Here for Full Details
Product Lines:
High Quality Forgings and Castings.

Special Expertise in Valve Parts and High Precision Finished Components. Pipe Fittings like Flanges, Elbows, & Collets. 
 
Target Markets:
Oil Well Servicing Companies, Industrial Equipment Manufacturers (OEMs), and Distributors. 
 
Sales Opportunity:
We offer excellent opportunity to have win-win situation. Our extensive knowledge and experience gives us high competitive edge over many Asian suppliers. Please submit a sales inquiry to us to discuss offer details.
 
Company ID: 102400 - Click Here for Full Details
Product Lines:
Services. 
 
Target Markets:
Businesses and Homeowners. 
 
Sales Opportunity:
Selling the Services on the website, asking homeowners for gas safety checks and upgrade of plumbing and heating products within the house hold, etc.
 
Company ID: 100560 - Click Here for Full Details
Product Lines:
Recycled Dimensional Plastic Lumber and Custom Shapes. 
 
Target Markets:
OEMs, Contractors, Engineers, Architects, Project Managers, Municipalities. 
 
Sales Opportunity:
Our company is a leader in the plastic products industry as the only company to offer both a molded and extruded product. We have been in business since 1998 and stand behind our products with an industry leading 50 year warranty. We provide ongoing training to our reps, an exclusive territory, top notch customer service, and field support throughout the year. We offer a structured commission plan, but give the reps the freedom to earn more than the structured plan.
 
Company ID: 102392 - Click Here for Full Details
Product Lines:
We are the Pipe Fabricators Source.

Pipe Stands, Pipe Alignment clamps, Pipe Beveling, Pipe Purging and Pipe Rigging Lines. 
 
Target Markets:
Industrial Supply Houses, Welding Supply Houses, Rental Houses. 
 
Sales Opportunity:
We are a fast growing privately owned and operated manufacturer with Stock in Houston, Texas. We are responsive and pride ourselves on our excellent customer service, superior quality and exceptional pricing. If you are calling on welding supply companies, industrial supply companies or tool rental houses our product are a natural fit.
 
Company ID: 98362 - Click Here for Full Details
Product Lines:
Our Business Manufacture Heavy Equipement Attachments.
- Concrete Pulverizer
- Screening Bucket
- Electro Magnet
- Wheel Loader and Excavator Attachment
- Severe Duty Bucket
- Fork Carriage
- Jib Boom
- Magnet and Generator
- Repair Service
- Custom Development in Heavy Equipement 
 
Target Markets:
Our product will be Sold to all Businesses Using Wheel Loaders and Excavators like Demolition, Recycling, Scrap Yard, Handling Material, Road, Pipe Line, Mining Business, and many other. 
 
Sales Opportunity:
With over 35 years experience in the field of steel, we offer its customers specialized heavy machinery products like bucket for extreme use in mine, a new range of screening bucket for excavators from 3 to 85 tons, several types of quick coupler, concrete pulverizers, scrap magnet.

We constantly innovate our products to make sure that our products are the best quality and durable. To meet your needs quickly, we have a vast inventory of products ready for all your work. We offer a rental service for short or long term on all our screening bucket and concrete pulverizer, submit a sales inquiry to us for more information.
 
Company ID: 102363 - Click Here for Full Details
Product Lines:
Carbide Tipped Hammers for Hammer Mills.

Carbide Replacement Parts for Whole-Log Wood Chippers. 
 
Target Markets:
Wood Pellet Producers, Coal-Fired Power Plants. 
 
Sales Opportunity:
The wood pellet industry is growing fast. Wood pellets are used in home heating. In Europe, pellets are mixed with coal in power plants, to reduce emissions. That co-fired approach will soon hit North America.

All wood pellet producers operate hammer mills and wood chippers. Wood pellets begin as wood chips (chippers). The chips are then size-reduced by a series of hammer mills (carbide hammers). Universal Wearparts' primary product line is chipper parts. Carbide hammers are manufactured on the same shop floor.

We're looking for manufacturers reps who currently call on pellet producers and/or power plants.
 
Company ID: 101321 - Click Here for Full Details
Product Lines:
We are a Manufacturer and Importer.

Our High Demand Maintenance, Safety, and Environmental Products include: Wiping Rags, Disposable Wipers, Oil Absorbents or all types, Spill Kits of all types, Disposable Protective Garments, Towels, and Textiles of all types, and Safety Garments. 
 
Target Markets:
Business to Business Sales to Any Type of Business. Automotive, Janitorial, Manufacturing, Utility, Municipal, Governmental, Energy, Electrical, Construction, Marine, and many more. 
 
Sales Opportunity:
Our 37 year old Louisiana manufacturing company is prepared to supply your agency with support to increase your income. Our products are bought, used, and reordered. Great repeat business once you establish the accounts! Since we are a manufacturing, we are also able to create special products and packaging to help you close accounts.

Commissions paid monthly on all shipped business. Our customer service representatives are available to support your sales efforts. We are interested in speaking with you. Best opportunities are in Louisiana, Texas, Arkansas, Mississippi, Arkansas, Tennessee, Missouri, Georgia and Florida.
 
Company ID: 100705 - Click Here for Full Details
Product Lines:
A family of Exceptional Industry Specific Multi-Purpose Products that Displace Moisture, Prevent Rust & Corrosion, Clean, and Lubricate. 
 
Target Markets:
Industrial, Transportation, Marine, Service Industry, Firearms, Municipalities. 
 
Sales Opportunity:
We are a relatively new company looking for established manufacturers representatives to market our tested and proven products to various target industries. This is a ground floor opportunity to market a family of revolutionary, unique products designed, tested and proven to be the best of the class.

We provide samples and literature for your clients, lucrative commissions, and sales support training. If you are looking for a product to add to your "portfolio" that is unique and premium, to be able to offer to your clients, we would like to talk with you. Please submit a sales inquiry to us today.
 
Company ID: 102345 - Click Here for Full Details
Product Lines:
Stone Coated Steel Roofing Tiles.

We have 6 profiles available:
- Verona
- Classic
- Shingle/Shake STD and Interlock

26 Gauge Steel Tile Covered with Ceramic Stone chips. Prime Product with all the Certifications needed, NOA from Miami-Dade County, and 50 years written warranty. 
 
Target Markets:
- Distributors of Roofing and/or Construction Materials
- Large Contractors who are Able to Stock the Product
- Lumberyards
- Retail Chain Stores
We do not sell retail so the customer must be able to keep the product in stock (at least one container of it). 
 
Sales Opportunity:
A great opportunity to increase your business by representing a prime quality roofing tile with premium support backing you up every step of the way. We will train you and will support your sales effort, all this in addition to an attractive commission and on time payments every time. We are determined to get to the top of this market segment. We have been moving up since the day we started and are in the need of help coming from aggressive independent reps.
 
Company ID: 97206 - Click Here for Full Details
Product Lines:
Gifts including: Coasters, Wine Stoppers, Picture Frames, Magnets, Ornaments, Travel Mugs, Paperweights, Business Card Holders, Jewelry, Hardware/Home Décor including: Drawer Pulls & Handles, Switch Covers, Soap Dishes, Tiles. 
 
Target Markets:
Gift Stores, Museum Shops, Specialty Hardware Stores, Jewelry Stores, Internet/Catalog Sales. 
 
Sales Opportunity:
Unique product line made from recycled materials. Materials used include seashells (lobster, mussel, scallop, oyster, clam, abalone, and others) scrap metal (aluminum, copper, brass, and titanium) and wood chips. All products are handcrafted at our workshop in Kennebunk, Maine.

Materials are cast in a highly resilient transparent epoxy resin. Many of our products can be customized for corporate, personal, and tourist applications. We've had tremendous success over the past 5 years in the Northeast and are seeking to expand all of our product lines into other regions.

We are in the process of expanding our hardware lines and are particularly interested in reps that serve specialty hardware and kitchen/bath stores.
 
Company ID: 102327 - Click Here for Full Details
Product Lines:
Tile. High end artisan stone patterned tiles manufactured in the USA. 
 
Target Markets:
Tile Showrooms 
 
Sales Opportunity:
We will train you and provide all marketing materials. You will call on and visit high end tile showrooms in the tristate area to sell our line of artisan printed tile. The showrooms will be identified by us and you’ll call them to schedule an appointment to show the line. Then, the showrooms would purchase samples to have on display and you would visit them maybe once every 4-6 weeks or so to update them with new products and additions to the marketing binder. Once the dealers have the showroom samples, they will be able to sell the products.

The hours are flexible as you can make your own hours but generally the visits would happen sometime between 9-5. Mon-Fri. The tiles are all Made In USA and range from $40-$50 square foot for the decorative tiles and $12-$24 per square foot for the matching field tiles so there is a good opportunity to make decent money (as people usually order a lot of tile for their entire kitchen or bathroom) with only visiting each showroom about once a month.
 
Company ID: 102320 - Click Here for Full Details
Product Lines:
Our company Provides Engineered Labor Solutions.

Logistics/Warehouse Management. Contract Packaging Operations, Assembly Operations and Staffing Requirements. Providing High Quality Business Solutions for over 15 years. 
 
Target Markets:
Packaging, Manufacturing or Printing Companies that need Co-Pack or Assembly Services. Transportation, Distribution or eCommerce Companies that need Fulfillment Services. Food or Snack Companies who need Pack-Out Services. 
 
Sales Opportunity:
Our services will be a great addition to the products and services you sell and add opportunities for you to increase your sales. Our services are multi-year agreements that will provide our reps with years of steady revenue growth. We work with our reps to help them increase their success.
 
Company ID: 102061 - Click Here for Full Details
Product Lines:
Manufacturer of Side Curtain for the Truck Industry.

Sale of Side Curtain Parts.
Mobile Advertising (OOH). 
 
Target Markets:
Companies who Manufacture and Transport Construction Materials such as:
Lumber
Building Material
Flooring
Millwork
Metals
Glass 
 
Sales Opportunity:
- High Quality and Durability:
Curtains are manufactured with high quality tarpaulin with 28 oz. strength, 900gsm and 2x2 Panama PVC coated polyester high gloss lacquer, in addition to PVC webbing construction.

- High Quality Graphic Design and Printing:
1400 DPI printing with silk-screen print and flexible ink that prevents cracking normally associated with flexible print media.

- Competitive Purchase Price:
Products can be bundled together as a complete solution at a discounted rate, or offered a la carte depending on client needs. All products and services are offered at highly competitive rates.

- Complete Customization:
All rigging, curtain and printing solutions can be customized to the client’s needs.
 
Company ID: 102313 - Click Here for Full Details
Product Lines:
Electrical Engineering, Construction, Testing, Commissioning and Operation:
Full Spectrum cradle to grave Services in the areas of High, Medium, and Low Voltage Distribution, Control, and Instrumentation Systems. 
 
Target Markets:
Industrial, Commercial, Oil and Gas, Mining. 
 
Sales Opportunity:
Territories available in North and South America. We have offices and support networks throughout the Americas and provides full support and training to sales representatives. Aggressive commission structure available.
 
Company ID: 102246 - Click Here for Full Details
Product Lines:
ISO9001 Certified
Solar Generators
Mil-Spec Solar Generators
Portable Solar Generators
Containerized Solar Power Systems
Micro-Grid Systems for New Home Construction
Micro-Grid Power for Water Treatment Systems
Solar Powered Speed Detection Systems
Solar Powered Street Lighting 
 
Target Markets:
Military
City Governments
HOA's
Home Builders
Electrical Supply Stores
Home Improvement Stores 
 
Sales Opportunity:
As a new innovative company, backed with proven technology solutions, our ISO9001 Factory produces the most reliable and "cost effective" "Renewable Energy" products demanded by the marketplace. Our renewable energy products serve the Commercial, Residential and Military markets.

We offer everything Customers demand!
-USA quality design, engineering, manufacturing and servicing.
-Reliable products and Solid Warranties.

-Diverified product selection including:
Solar Generators, Micro-Grids, KWH Monitoring Kits, Solar HVAC, Mil-Spec Portable Power, Residential Lithium Battery Back-up Generators, Retail Solar-Kits,
 
Company ID: 96190 - Click Here for Full Details
Product Lines:
Fluid & Lubrication Equipment like:
Pneumatic Oil Pumps, Grease Pumps, Oil Guns, Waste Oil Drainers, Waste Oil Changers, Diaphragm Pumps, DEF Pumps, Air, Oil, Grease Hose Reels, Diesel Pumps, Hand Pumps, Grease Guns. 
 
Target Markets:
Automotive Aftermarket business
Oil Company
Automotive Workshop
Industrial
Mining
Fleet 
 
Sales Opportunity:
Why is this a good opportunity?
We are the leading Asian lube manufacturer. Our advantage is we manufacture good quality equipment with competitive prices. We can provide one-stop shopping for the needs of lubrication equipment.We have over 20 years experience on manufacturing lube product line.

What makes you a good company?
Trusted people, Fast response, firm quality, focus on automotive aftermarket service industry, flexible solution, friendly communication.
▲ ISO9001 Registered factory and execute advanced quality system.
▲ 100% function testing of each item ensures the high performance products.
▲ Competitive price and all-around service optimize your profit.
▲ 2 years limited warranty and $2,000,000 USD Product Liability guarantees your customer.

What Competitive advantages do you have?
Complete product line, high quality, favorable price.

How do you support your reps?
We can supply products in the USA locally and deliver the goods and promotion flyers to support Reps to do the marketing.

What is your commission structure?
Based on sales amount, open to discuss.
 
Company ID: 27824 - Click Here for Full Details
Product Lines:
Reps will be Selling Ad Specialty and Promotional Products including T-Shirts, Calendars. Business Forms, and Labels. 
 
Target Markets:
Marketing will be to Small to Medium Size Businesses, Schools and Churches, Non-Profit, and Social Organizations. 
 
Sales Opportunity:
Ad specialty items are a great advertising media because they not only are cost effective, but leaves a lasting impression with the end-user as well as promote companies images.
 
Company ID: 102203 - Click Here for Full Details
Product Lines:
Equipment for Loading any Dry Bulk Material into:
Tanker Trucks, Rail Cars, Open Trucks, Stock Piling, Barges, and Ships
Retractable Loading Spouts
Telescopic Chutes
Spout Positioners
Integral Dust Collection
Gravity-Slides
Slide Gates
Bulk Bag Filling Station
Diverter Gates 
 
Target Markets:
Large Industries Plants involved in the following Dry Bulk Materials:
• Cement
• Fly Ash
• Alumina
• Phosphates
• Silica
• Salt
• Coal
• Chemicals
• Agricultural Industry
• Food Products
• Wood & Paper Products 
 
Sales Opportunity:
Company will supply leads. We are looking for Manufacturers reps on sales commission only. Many states available as well as international. Paying commisson of 10 to 20% on total sale.
 
Company ID: 102201 - Click Here for Full Details
Product Lines:
LED Wall Packs, LED Area Lights, LED High Bay Lights, LED Retrofit Kits.

Product Distributorship; Financing Available, Projects with our products Providing financing. 
 
Target Markets:
South-West of USA including California, Nevada, Arizona, Oregon, New Mexico, Colorado. 
 
Sales Opportunity:
1. Our products are directly manufactured from our factory
2. High quality products with competitive pricing
3. Innovative products that are highly demanded in the lighting industry
4. UL/ETL certified and DLC registered products that are qualified for energy saving incentives from utility company, local government, and Federal government.
5. Very flexible terms for distributors, contractors and financing is available
6. Fully support from sales literature, product sample, after sales
7. Competitive commission (higher than industrial norm) that is negotiable depending on the circumstances.
 
Company ID: 96673 - Click Here for Full Details
Product Lines:
We Provide Fabricated Sheet Metal Products.

We Offer Precision Shearing and Blanking, Custom Bending to Any Angle, Automated Punching and Stamping, Roll Forming, and Part Assembly. 
 
Target Markets:
We currently serve these industries and are looking for more opportunities:
Bridge & Highway
Commercial Construction
HVAC

We want to expand to sell to:
Roofing
Automotive
Heavy Industry
Defense
CPG 
 
Sales Opportunity:
We have been in business since 1987 and have NEVER solicited sales in the history of our company, we know there are a lot of opportunities out there and just need feet on the ground to get us there. Our past/current high-profile projects such as the Brooklyn Bridge, Freedom Tower, Columbia University Lantern, and Pulaski Highway have given us a great pedigree for any products, demanding an extremely high level of detail, promptness of delivery, and certification of domestic origin and production.

Most, if not all, fabricated sheet metal/plate products are in our wheelhouse and our lean, flat, and low overhead team allows us to compete with almost anyone. We will support our sales rep with a better than average commission structure and autonomy to use your own sales approach. We provide CAD drawings, quotations, sales assistance materials, and consulting.
 
Company ID: 102185 - Click Here for Full Details
Product Lines:
When building a home I noticed a need for this product. Anyone Assembling PVC or CPVC Piping Across the Globe is Challenged with Juggling Two Cans of Toxic Glue to assemble the Piping. This product will Solve this Juggling and spillage Problem for all Users Globally. 
 
Target Markets:
80 million Users in the USA will Benefit from our product. Including but not limited to Landscapers, Gardeners, Golf Courses, Homeowners, Handyman, Plumbers, Electricians, HVAC Installers, Pool Repair Professionals, Fire Sprinkler Installers, Solar Installers, Utility Companies, and more. 
 
Sales Opportunity:
This amazing opportunity is for representatives that are representing or are presenting to The Home Depot, Lowe's, Ace Hardware, Ewing Irrigation, plumbing houses, all solar installation companies, utility companies, and more.
 
Company ID: 102180 - Click Here for Full Details
Product Lines:
Our long established company is one of the largest suppliers of contract upholstery fabrics and vinyls to designers, specifiers, architects, furniture manufacturers, healthcare institutions and the Federal Government. 
 
Target Markets:
This position requires presenting and selling to architects, interior designers, facility managers and procurement groups. Our target markets are contract, healthcare, assisted living and hospitality. 
 
Sales Opportunity:
This is a unique opportunity to the right candidate. We offer exceptional customer service. We are one of the premier suppliers of contract vinyls, faux leathers and fabrics in the country also servicing international markets. As a domestic mill we offer a quick ship program with hundreds of fabric patterns and a unique custom program called "Tweak it". This allows the specifier to select custom colors without any additional charge or extended lead time.

Those candidates already representing a contract seating manufacturer are ideally positioned for this product line. This is a fun and exciting company to work with and we engage our reps in all aspects of our business. If you have a desire to work with a reputable, honest company offering a diverse product line and a solid commission program please submit a sales inquiry to us.
 
Company ID: 102118 - Click Here for Full Details
Product Lines:
Excellent Multi-Use Flashlights and Lanterns.

Lights come in Standard, Rechargeable, and Solar Powered Versions. We also Offer a Full Line of Excellent Knives Covering the Pocketknife, Hunting, Survival, Industrial, and High Quality Gift Market as well as the Kitchen and Butcher Shop Trade. 
 
Target Markets:
Hunting, Fishing, Camping, Industrial, Dive Shops, Kitchen and Bath, Butcher, Gift, Automotive Shops, and Hardware Stores. 
 
Sales Opportunity:
Great commission base for the right rep or group. Company backing with sales support, literature. and training. We have been in business for three years and we are expanding our product lines as well as territories. If you're seeking lines and need good products to sell and promote, this could be a great addition.
 
Company ID: 102106 - Click Here for Full Details
Product Lines:
UL Fuel Cells, UL Canada Fuel Cells, Large Power Module Enclosures, Fabrication, DoD established as well. 
 
Target Markets:
Companies that use what we make. 
 
Sales Opportunity:
We are an International company and are looking for more work. We have tremendous global capabilities. We are looking for more fuel cell work and large scale fabrication volumes. Custom fabrication is also desired. Bases, Tanks, Assemblies, etc.
 
Company ID: 101965 - Click Here for Full Details
Product Lines:
Sales Representative for Aggregate and Cement Products, and all other products. 
 
Target Markets:
Consulting Engineering Firms, Construction Company, Constructors, Architect Firms, Landscapers, etc. 
 
Sales Opportunity:
Our company is subsidiary in US. We build commercial and residential. Share profit with our subsidiary. We offer completive salary and commission, 15%.
 
Company ID: 102101 - Click Here for Full Details
Product Lines:
We Design & Install Structural Engineered Building Systems for the Commercial and Industrial Markets. 
 
Target Markets:
Architects, Building Owners, General Contractors. We build throughout the US, with a current Focus in Arizona and Texas. The Ideal Project is Four Stories or less. Hotels, Assisted Living Facilities, Churches, Warehouses, Schools, and Gyms are great fits for our Alternative Building Systems. 
 
Sales Opportunity:
We have a niche market in providing alternative building systems that provide a reduced construction time and better quality finish for the building owner. Our company provides a complete design build package for our clients, including engineered drawings, for the quality installation of the entire building envelope. The design build allows the architectural process to be more efficient. We work closely with any selected architect and general contractor, allowing for a streamlined new build.
 
Company ID: 102087 - Click Here for Full Details
Product Lines:
Offset and Digital Printing.

Packaging Products, Printing on Paper and Cardboard with Die Cutting and Folding Capabilities. We Offer Direct Mail services, from Design and Concept to Fulfillment. 
 
Target Markets:
Food Manufacturers, Any Manufacturer that Requires Packaging Products. 
 
Sales Opportunity:
- High commission paid.
- Quick turn around.
- All products manufactured in house.
- All Heidelberg equipment.
- Centrally Located in Illinois right next to Fedex, UPS, and USPS hubs.
 
Company ID: 102086 - Click Here for Full Details
Product Lines:
Knobs Pulls, Drawer Slides, Lighting Hinges, Cabinet Accessories. 
 
Target Markets:
Hospitality, Furniture Manufacturer, Cabinet Makers, Office Furniture. 
 
Sales Opportunity:
High quality and value priced items.Hhigh customer service. Easy to communicate. Quick to meet market demands, Support with up to date website catalogs leads. 6% gross sale commission easy math.
 
Company ID: 100505 - Click Here for Full Details
Product Lines:
Framed mirrors.
Frameless mirrors
Paintings 
 
Target Markets:
Major Home Décor, Furniture, Accessories, Chain Stores. Mass Merchants U.S. nationwide 
 
Sales Opportunity:
Our company has been in Home Decor industry for over 30 years servicing chain stores in U.S., Canada, and Mexico. We have ability to ship FOB China or POE Long Beach, California with every service request from the buyer.

We have shipped over 80 containers of mirrors up to date this year and looking for active reps who already have a strong relationship with mirror buyers of Chain Stores and mass Merchants who can purchase container or less than a container orders. We inspect 100% of production with our own inspectors and agent to guarantee quality.
 
Company ID: 102059 - Click Here for Full Details
Product Lines:
Our company currently Sells its Products to Building Supply Yards and Landscape Supply Yards.

We seek to Add a New product line(s) within or outside of the above industries. 
 
Target Markets:
We currently cater to the Concrete and Landscape Industries. We are open to adding a new product line outside of its industries. If the product line is outside of the Concrete or Landscape Industries, the key will be that the new line will be able to ship on our flatbed semi trucks. 
 
Sales Opportunity:
I'm seeking a person or agency to bring in a new product line to grow our mid west regions sales a minimum of $2,000,000 annually. We will inventory, deliver, invoice, and collect the money for this product line. Our company has office space for a person if need be. We ship most of our good on its own flatbed semi trucks. We have warehouses in Detroit MI, Dallas, TX, Jacksonville, FL, Las Vegas, NV, and Tucson, AZ.
 
Company ID: 102016 - Click Here for Full Details
Product Lines:
Drywall Tools, Automatic Taping Tools. 
 
Target Markets:
Drywall Supply Yards, Building Supply Yards. 
 
Sales Opportunity:
Our drywall taping tools are of extreme quality. Made in North America using American aluminum and stainless. Our tools inspire a fierce loyalty in our resellers and end users. Our company is 35 years old under the same ownership. We utilize the latest in technology to produce our products in house. All our products need is an introduction, minimal PK, and the flow of sales will begin. Our company is seeking regional representation throughout the U.S.
 
Company ID: 102009 - Click Here for Full Details
Product Lines:
Plywood Products Specifically Beadboard Made from MDF. 
 
Target Markets:
Wholesale Lumber Companies, Big Box Stores, Large Bbuilders, and Mobile Home Industry. 
 
Sales Opportunity:
Large Manufacturing company with excellent product with high quality. Looking for someone who has contacts and willing to help us grow. Looking to expand in Illinois, Indiana and Ohio. We specialize in volume cut work too. We have several large accounts servicing area manufactures in product cut to size for their assembly process. We want someone to join us in this fast growing opportunity to expand nationally.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2016
LINKS | SITE MAP | TERMS OF USE