Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
  Lost Password
     HomeFind Sales RepsFind Product LinesSales Opportunities     
\Directory\Construction\Concrete Supplies & Services
Click on Company ID to View Full Details
Company ID: 8113 - Click Here for Full DetailsUpdated
Product Lines:
Target A - Fiber for Concrete Reinforcement.
Target B - Fiber for Asphalt Reinforcement.
Target C - Coatings and Sealers. 
Target Markets:
Target A - Ready-Mix and/or Pre-Cast Producers, Architects, Engineers, and Concrete Contractors.
Target B - Contractors, Pavers, Producers, Engineers, DOT's, Township Supervisors, and Large Property Owners.
Target C - Property Developers/Managers, Distributors, Engineers, and Architects. 
Sales Opportunity:
FORTA® is a growing company with three divisions, Concrete, Asphalt (FORTA-FI®), and Coatings & Sealers (Arisfor®). This is an exceptional opportunity to work with a growing company that understands the value of providing support to their independent sales representatives. You will benefit from an industry-leading commission program, as well an excellent training program to introduce you to our products and services and continued training as needed. We are known for our top of the line support staff and friendliness. When you work with us, you are part of our family!

Territories Open:
Fiber for concrete reinforcement - MT, OK, N. TX, N. CA, SW. NV, OR and WA.
Fiber for asphalt reinforcement - TN, MS, NC, SC, AL, GA, and FL.
Coatings and Sealers - TN, MS, NC, SC, AL, TX, OK, and GA.
Company ID: 28327 - Click Here for Full DetailsUpdated
Product Lines:
Moisture Mitigation Systems, Epoxy Coatings Cementicious Underlayments. 
Target Markets:
Architects, Specifiers, General Contractors, Restoration Contractors, Surface Prep Contractors, Flooring Contractors, Waterproofing Contractors, Concrete Contractors, Epoxy Contractors, Coatings Contractors. 
Sales Opportunity:
Our company has specialized in moisture mitigation and self leveling cements. High commission and protected territory. New state of the art production facility in the USA. Seeking reps in select areas.
Company ID: 112595 - Click Here for Full DetailsUpdated
Product Lines:
Concrete Products for Cleaning and Maintenance along with Form Release Agents.

We also have a Salt Neutralizing Product and Cleaner for Fleet Management. Primary Product is a Proprietary Concrete Dissolving Product. 
Target Markets:
Ready Mix Companies, Concrete Contractors, Precast Plants, Cement Suppliers, trucking fleets, cities, counties and DOT’s. 
Sales Opportunity:
We are seeking independent sales representatives with emphasis within the Concrete industry. Commission is negotiable. Territory exclusivity possible. Very good customer retention. Try before you buy and an infustructure to ship within 48 hours or less and support for your customers. Sales literature and direct contact with ownership. Many product support videos for demonstrations and user training. You sell, we do the rest.
Company ID: 110507 - Click Here for Full Details
Product Lines:
FRP Wall Panels, Integrated FRP Faced Prefabricated Wall Protection Curbs, Cooler, Freezer, and Personnel Doors and a Line of Hygienic Bollards and Guardrails.

All of our Products are Designed to Help the Food Industry and pharmaceutical to be Compliant. Our products are of the highest quality. 
Target Markets:
Food Processors, Pharmaceutical Companies, Architects, Contractors, Engineers, and Cold Storage Construction Companies. 
Sales Opportunity:
Ours is a family business based out of Wisconsin USA for the last 50 years. Originally started in the commercial construction industry, specializing in cold storage and food processing plants. This lifetime of experience has enabled us to understand the importance of quality in all aspects of hygienic environment construction.

We are currently looking for independent sales reps to market our products to the food processing and pharmaceutical industries. We will also need our products brought before architects and engineers that are specifying the projects.

We pride ourselves on keeping ahead of safe building codes and always looking for ways to improve the quality of our products. We provide high commission rates, sales literature, exclusive territory options, lead management system, along with company on call support.
Company ID: 103232 - Click Here for Full Details
Product Lines:
Attachments for Tractors, Skid Steers, and Excavators that are meant for Large Farms, as well as Forestry, Construction, and Rental.

Equipment includes Trenchers, Brush Mulchers, Tree Shears, Tree Saws, Tree Spades, Stump Grinders, Generators, Auger Drives & Bits, Wood Splitters and Tractor Booms 
Target Markets:
Our customers are Farm Equipment Dealers, Construction Dealers, Small Engine Dealers as well as Rental Houses. A new rep must already be visiting these potential customers on a regular bases to be considered 
Sales Opportunity:
Our pricing is a FOB dealer (free freight) in North America and our products are powder coated and shipped crated. We supply free full line catalogs for the dealer literature racks, offer consignment equipment, and attend trade shows. Plus offer a lot of online support as well as answer the phone in person when our sales force has any questions so may questions can be answered on the spot during a dealer visit. We strive to keep very short lead times and often can ship in under a week. We are looking for long term relationships with independent reps in select areas.
Company ID: 112596 - Click Here for Full Details
Product Lines:
Injection Molding of Thermoplastics, 50-400 ton Presses
Mold Making and Design, Complex, Hot Runner, Unscrewing, Prototyping, Full Sampling, and Validation
A Modular Molding System, Pre-Engineered, Rapid Design, Prototyping, SMED, Offer Free Tooling of RM
Extrusion: PETG Tube 
Target Markets:
We are Currently 40% Medical and 40% Automotive with Remainder being a Blend of Industrial, Packaging, and Consumer. Interested in targeting: Medical, Automotive, Industrial, Recreational Vehicle, Boat, Truck, Trailer. 
Sales Opportunity:
PPI is a $6 million in sales company seeking to grow the injection molding sector to more than $10 million while using full tool shop to provide internal service of tooling and repair. Secondly, we seek to grow our modular molding system to a minimum of $2 million in annual sales.

We have attracted many new opportunities by gaining certified quality systems of IATF 16949 in Molding and ISO 9001:2015 in Tooling and Extrusion. Our customer base includes such companies as Smith Medical, Porex Filtration, Big Ass Solutions, Dayton Superior and Sumitomo Riko. We also land customers with the offer of free tooling for the proper volume match. Our company is unique with its supply of modular mold and total tool support of injection molding.

It's a given that we maintain an up to date website and online marketing presence. We maintain sales literature and offer sales and engineering support to our representation.
Company ID: 112184 - Click Here for Full Details
Product Lines:
We Manufacture Half to Three-Yard Self-Contained, Reverse-Discharge Concrete Mixer Units that can be Mounted onto the Frame of a Heavy-Duty Pickup Truck. 
Target Markets:
General Contractors, Home Remodelers, Pool & Spa, Paving, Sidewalk, Curbing, & Landscaping Contractors, and Municipal Highway Departments. We've also Sold our Mixers to a Cemetery, a Vineyard, a Gold Mine, and a Company in Guatemala who Hoists Them Up on Multi-Story Buildings to Pour Floors. 
Sales Opportunity:
We offer a generous commission on the sale of our mixers. We were the only one of its kind when we began in 2008 and presently we have only one competitor in the US. These mixers are just like the big 4-10 yard units, only smaller, and contractors like them because they eliminate short-load delivery charges (which are a minimum of 4-7 yards, depending upon the area).

There is no paying labor costs while waiting on delivery, and they are lightweight, eliminating costly landscape repairs among other advantages. We believe there is great potential opportunity with the Keystone & Dakota Access pipelines, building the border wall/fence, and with islands and 3rd world countries whose lack of infrastructure and poor roads limit access to remote areas.
Company ID: 110695 - Click Here for Full Details
Product Lines:
Hand Protection - Cut Protection, Leather, Textiles, Disposables, High-Viz Apparel, Protective Apparel, Head & Foot Protection, Hearing and Respiratory Protection.

ANSI Compliant Eye Protection, Ergonomic Protection, & Accessories. 
Target Markets:
Manufacturing, MRO, Machine Shops, Automotive, Foundries, Industrial, Safety, Construction, HVAC, Janitorial, Plumbing, Traffic Safety. 
Sales Opportunity:
We’re looking for a results-driven commission based, sales representative to actively seek out and engage customer prospects. We are a complete head-to-toe safety expert. We are committed to providing exceptional safety solutions for all of our customers.

By constantly refining our lasting partnerships, we continue to strengthen and expand our strategic positions in: Research & Development, Global Sourcing Quality Control, Inventory Management, Training Programs, Flexible Services.

We are headquartered in City of Industry, CA. We have four distribution centers strategically located in:
City of Industry, CA
Cleveland, OH
Dallas, TX
Atlanta, GA
Company ID: 111394 - Click Here for Full Details
Product Lines:
The key product is:
One Epoxy System with 8 Flooring Uses
Primer Over Fresh Green Concrete
Self-Leveling Flooring
Trowelable Flooring
Coving and Patching Compounds
Control-Joint Preparation
Crack Filling and Repairing
Ceramic Tile, Brick Bedding, and Grouting Needs 
Target Markets:
Flooring Contractors, Food, Beverage, Pharmaceutical, Construction Contractors, Transportation and Commercial Construction. 
Sales Opportunity:
Our company develops and supplies proven epoxy systems that meet the needs of today’s demanding applications. Our systems are formulated for the specific needs of the food, brewery, pharmaceutical, soft drink, and heavy industrial industries. With ever-increasing hygienic regulations, steam cleaning becomes more frequent at the same time that cleaning agents are becoming more concentrated and corrosive. This requires an epoxy system with excellent chemical resistance and resiliency to thermal shock.
Company ID: 111512 - Click Here for Full Details
Product Lines:
Construction Chemical for Cleaning, Sealing, Maintaining Hardscape Products.

Signature Product is EASYJoint, a Revolutionary, All Weather Jointing Method for Concrete Pavers, Flagstone, etc. 
Target Markets:
Hardscape/Landscape Dealers. 
Sales Opportunity:
EASYJoint is revolutionizing the hardscape industry with its all-weather, permeable and dust free attributes. AZPECTS USA also manufactures and distributes hardscape products targeting the stone and paver industry.
Company ID: 22831 - Click Here for Full Details
Product Lines:
We are a Leading Manufacturer of Patented Stormwater Treatment Systems.

Each System is Custom Engineered for Site Specific Projects. We offer 3 areas of treatment:
Catch Basin Insert
Hydrodynamic Separation
Treatment Train Filtration Technology 
Target Markets:
Experience Working with Municipalities, Design Engineers, Architects, and Contractors will be the Targets. Our Reseach & Engineering Departments will Support your Efforts in all Areas of Sales. We Work Closely with the Regulators within your Territory to Achieve Acceptance of our Technology. 
Sales Opportunity:
Independently sell and market our products to decision makers that have immediate needs for stormwater treatment systems. We are a leading manufacturer of stormwater treatment systems. High demand and new markets for our products have created a rare opportunity for select independent representatives in exclusive territories. High commissions with fully supported engineered solutions. Bring your technical sales ability and we'll handle the administrative and engineering support.
Company ID: 109755 - Click Here for Full Details
Product Lines:
Swedish Workwear, Top of the Line Products, In Stock Program, Available Now, we also have a Work Glove Line and a Rainwear Line. 
Target Markets:
- Distributors
- Retail Stores
- Hand Users 
Sales Opportunity:
This product is very well known in Sweden. It was been introduced 4 years ago in Canada with very good succeess and now we are ready to launch it in the USA. We have a warehouse in Mayfield, New York that's able us to ship directly into the USA. Please feel free to submit a sales inquiry to us for more information.
Company ID: 104834 - Click Here for Full Details
Product Lines:
Coatings and Sealers for Restoration, Repair, and New Construction. 
Target Markets:
Customer Base of Coatings Distributors, Coatings Contractors, and Specifiers. Additionally, it would be Beneficial to Call on Architects, Engineers, and/or Large Commercial Property Owners. 
Sales Opportunity:
An innovative coatings company is seeking a reliable, motivated and confident sales representatives, to attract new customers as we expand the territories across the country. Be a part of a team that provides high quality products and outstanding customer service. Coatings and sealers offer a solution for repair, restoration and new construction.

This is a 100% commissioned sales representative position. You will be responsible for your own expenses. However, you will benefit from an industry-leading commission program, as well as product, technical, sales and engineering support. We offer an excellent training program to introduce you to the wide variety of products and services.
Company ID: 104164 - Click Here for Full Details
Product Lines:
Concrete Curing and Finishing Products. Decorative Concrete

Concrete Grinding and Polishing Products. Concrete Repair Products. Concrete Colors, Fiber reinforcement, and Rebar Replacement. 
Target Markets:
Architects, Engineers, Flatwork Contractors, Flooring Contractors, and Large General Contractors. 
Sales Opportunity:
We offer newest technology for solutions for concrete curing, finishing and polishing. New OSHA rules require reduced silica dust, we lead the industry in this area and offer a clean, green solution for concrete

Prefer significant construction industry experience. Leads for all of North America and we are specified with several national chains. You need experience with architects, engineers and contractors. Ability to work with all areas of the construction industry. We offer hands on training and expect you to understand our technology and knowledge of concrete is very helpful.
Company ID: 105050 - Click Here for Full Details
Product Lines:
Landscape Furnishings, Various Materials - Planters, Bollards, Benches, Columns, Fountains, Stair Treads, Copings, etc

We are the First to Offer Insulated Planters which Qualify for LEED Points. Our Custom Capabilities are the Best in the Industry. 
Target Markets:
Landscape Architects, Developers, Landscape Contractors. Our products are Typically Used in Commercial or High-End Residential Projects. 
Sales Opportunity:
We have a great product line of, planters, columns, fountains, bollards, picnic tables, stair treads, balustrading, wall and pool copings,and we are constantly expanding and growing. We will provide excellent support for our reps arming you with samples, catalogs, and the ability to answer any and all questions as they come up. We have all test results available, etc.

We try to be as green as possible and offer the best solutions for landscape designers. We are innovative and all products made right here is the USA. Looking for Reps in the States and a Regional Sales Manager. We are looking for representation in Florida and the entire Southeast.
Company ID: 106164 - Click Here for Full Details
Product Lines:
Skid Steer Attachments.

Including Laser, GPS, 3D, and Sonic Automated Leveling skid Steer or Tractor Attachment. Mobile Fuel Cart of 500, 750, or 990 Gallons. 
Target Markets:
Equipment Dealers and Rental Dealers. 
Sales Opportunity:
We are a high tech manufacturing company that produces our products from start to finish located in Southern Minnesota. We've been in business for 26 years and have an established sales and service teams in place. Our business has grown on service and quality.

We are looking for independent reps that understand the light construction equipment industry. Our attachments are innovative and will give the end user a competitive advantage over the competition. We are looking for reps along all costal and southern states. Our product lines are higher dollar. We pay 6% commission at the time of payment.
Company ID: 92023 - Click Here for Full Details
Product Lines:
Concrete Admixtures that Stop the Moisture and Flooring Crisis, as well as Provide Waterproofing.

Superior Workability of Concrete in all Applications, Ready Mix, Precast, etc. Vapor Lock. The Worlds Best Concrete Repair Material, MG-Krete. 
Target Markets:
Architects, Engineers, GC's, DOT's, Ready Mix Providers, Contractors, End-Users, etc. 
Sales Opportunity:
This is a lucrative opportunity for a hard working AEC professional. We will supply you with outstanding support when you are promoting or selling our core products. Ours and our advocate company Imco Technologies only manufacture the highest Quality products. These products are easily specifiable and will result in permanent ongoing specs.
Company ID: 103113 - Click Here for Full Details
Product Lines:
Building and Concrete Restoration Specialty Chemical products for Maintaining, Preserving, Restoring, and Protecting New Construction, Concrete, Masonry, and other Architectural Surfaces.

Sealers And Water Repellents
Interior Floor Care
EIFS Appearance System 
Target Markets:
Reps Recruit and Sell to Strong Distributors that will Stock Products and to Large Contractors and Government Maintenance Departments. Promotional Contact with Specifying Professionals, such as Architects and Engineers is important. 
Sales Opportunity:
These products are known in the industry with high performance is a key attribute of this line. This line is more extensive and unique than its competitors. For instance, our copper-stain remover was used recently extensively on the restoration of the U.S. Supreme Court building in Washington, DC.

Our company has an active R&D department that continues to develop new and unique products and products for unique projects. Reps are supported with product literature, training and direct access to technical resources in the Company. Our commission structure is competitive and designed to protect your territory.
Company ID: 102915 - Click Here for Full Details
Product Lines:
High Performance Composite (CFRP) Systems Used in the Repair and Rehabilitation of Steel Reinforced Concrete Structures. Blast Mitigation, Structural Upgrades, Siesmic Protection, Corrosion Repair. 
Target Markets:
Calling on Specifiers, Contractors, Property Owners, Municipalities, DOT, DOD, Nuclear Power Industry, Utility Companies. 
Sales Opportunity:
Looking for commission only sales representatives to add our product line to their existing tool bag. The sales call for these products typically elevates to a technical discussion early in the sales process. Most projects will require product/project engineering support provided by our company in most cases. Our product line would be considered a very Niche product line.
Company ID: 54402 - Click Here for Full Details
Product Lines:
Polished Concrete Systems: Treatments, Colorants, Densifiers Expansive Concrete Components and Densifers for DOT Bridges & Highways. Expansive Grouts for Oil & Gas Industry. Concrete Fiber. Integral Troweled Cure for Polished Concrete. Concrete grinders, abrasives and concrete burnishers. 
Target Markets:
Selling to Owners. Selling Division 03 and 09 to Architects. DOT and Government, Concrete Contractors, Distributorships. Oil and Gas Industry. 
Sales Opportunity:
We have a system sell. This is perfect for Independent Reps, we have a lot of products. High commision. Great to add onto existing lines. Education provided. We support you with a CRM system for tracking custormers, projects, leads and all products and pricing entered. This is performance based, commission only compensation.

Polished Concrete Systerm: Ph Neutral. No issues with hazardous waste disposal. Our line of Densifiers are not water soluble and do not contribute to ASR. Our chemistry will not resist color introduction or walk off, as is common with other chemistry.

The colorants are micro-pigments thus will not fade. Craftsmen are certified with in-depth training. Using Grinding, Honing and Polishing equipment designed for complete concrete processing that can expose aggregate (this is not janitorial equipment). Equipment is not electric, and does not require a 3 phase hook up.

Unless specified, our installers will process the entire floor including any and all wall edges. The process is wet, maintaining ambient air quality and ensuring no dust contaminates the HVAC system. Water enables a higher quality cut to the floor. The process IS NOT opening the concrete and applying a sealer. The floors include accountability through onsite management.

Shrinkage Compensating Concrete for concrete with no joints and no curling and no shrinkage cracks. This is a unique product. We have just added a line of product for the Oil and Gas Industry.
Company ID: 90666 - Click Here for Full Details
Product Lines:
Manufacture a Full Line of Standard and Custom Hydraulic Fittings and Adapters Ranging from 1/8" to Over 2" in Size.

Types of Fittings include SAE J514,J1453, JIC 37 Degree Flare, O-Ring, Pipe, Swivel, Bulkhead, Hose Barb, Flange, Metric, Brazed Tube and High Pressure Flat Faced O-Ring Fittings. 
Target Markets:
Distributors. Original Equipment Manufacturers (OEM's) such as Construction, Agricultural, Forestry, Lawn, and Off-Road Equipment Manufacturers. Distributors of Fluid Power Products. 
Sales Opportunity:
Increase your commission. If you are currently selling pumps, hose, and fluid power products, incorporate our line of hydraulic fittings. Our fittings will compliment your line. We can also build to the customers print,and engineer product for their application. We have a standard line of fittings and adapters in stock for immediate sale.
Company ID: 80275 - Click Here for Full Details
Product Lines:
Metal Castings; Sand Castings, Gray Iron, Ductile, Die Castings, and Forgings. Machined or as Cast. From Very Small Castings to Castings over 30 Tons. 
Target Markets:
Mining, Construction, Agriculture, Railroad, Dredging, Coal, Industrial, and Other Industries. 
Sales Opportunity:
Supplier/manufacturer of castings and machining looking for experienced sales representatives in select territories in North America. We supply steel sand castings, gray iron, ductile, die castings and forgings including machining. From small castings to very large castings in excess of 30 to 40 tons. Industries served are construction, mining, railroad, dredging, agriculture, and variouse industrial accounts. We also can supply other metal stampings, etc.

U.S. based with China manufacturing operations. Easy communications, financing, logistics support, technical support, door to door service. Over 30 years of experience with Asian manufacturing.
Company ID: 112748 - Click Here for Full DetailsUpdated
Product Lines:
Target A: Industrial Cleaners for Food Manufacturing
Target B: Construction and Concrete Cleaners
Target C: Rust Removal Products 
Target Markets:
Food Manufacturers
Construction and Masonry
Possibly Retail Outlets 
Sales Opportunity:
We are seeking independent sales representatives with emphasis within the Concrete industry and Industrial Cleaner industry. Commission is negotiable. Very good customer retention. Sales literature and direct contact with ownership. Many product support videos for demonstrations and user training.
Company ID: 112796 - Click Here for Full DetailsNew Profile
Product Lines:
Cellular Lightweight Concrete (CLC) Blocks and Panels.

1. Decorative Blocks for the DIY or Landscape Industry.
2. Large Insulated "Sandwich" Wall Panels for Building Contractors.
3. These Thin Panels are Perfect for Apartment Builders Interior Partitions. 
Target Markets:
Manufacturer Representatives would be selling to Architects, Engineers, Home Centers, Building Supply Dealers, Above and Below Ground Building Contractors, Apartment Developers. 
Sales Opportunity:
Cellular Lightweight Concrete (CLC) is a new to Canada, this building product is popular in Europe, and around the world. We produce these Blocks and Panels.

1. Decorative Blocks for the DIY or Landscape Industry.
2. Large insulated "sandwich" Wall Panels for Building contractors.
3. CLC thin Panels for Apartment Builders interior partitions.

It ages the same as regular ready-mix at 1/4 to 1/2 the weight! The weight factor, fire-rating and insulating qualities (heat, cold and sound) gives our products a decided advantage for building projects.We are a small company currently producing large Redi-Rock Landscape blocks for retaining walls in the Landscape Industry and wish to expand our product line. A commission structure is negotiable. Our P.P. presentation will be forwarded to interested Manufacturer Representatives.
Company ID: 112638 - Click Here for Full Details
Product Lines:
Building Material: Hardscape Landscaping Stone and Concrete Products including: Interlocking Pavers, Retaining Wall Blocks, Slabs, Caps, Steps, Edges.

Consistent Beauty, 100% True Full-Bodied Color, Withstands Harshest Climates, Quality Setting Industry Benchmarks with a Lifetime Warranty. 
Target Markets:
Systems for Outdoor Applications such as Residential and Commercial. We Sell Through Distributors to Professional Landscape Designers, Contractors, Architects, and Engineers. Our Products are Excellent for Permeable and Green Initiatives or Simply for Outdoor Elegance from Cityscapes to Backyard Patios. 
Sales Opportunity:
We are looking to expand our market reach into Texas and California. We are looking to partner with independent sales reps to help break ground in these territories. We will support strategic action plans with marketing collateral and develop programs specific to the region. We employ over 600 people in Canada and the United States.

We manufacture high-quality landscaping stones with facilities across Canada and the USA. We are a family business that fosters our cherished values and innovative ideas. We have doubled in growth over the past five years – and this is just the beginning! If you feel you can get behind a product and company like this let's chat and see if we can make a mutually beneficial arrangement.
Company ID: 112607 - Click Here for Full Details
Product Lines:
We are a Manufacturer of an Innovative Attachment Used for Leveling on a Track Loader/Skid Steer.

We have 4 Different Products and we are Reinventing the World of Surface Shaping. Our Equipment is a 'Push 'N' Grade' Attachment, to Push Sand Piles as well as Doing Fine Grrading. 
Target Markets:
Track Loader & Skid Steer Dealers, End-Users Working in Construction, Paving, Landscaping (Paver Stones, Sports Field, etc.), Concrete, and many More Fields. 
Sales Opportunity:
We want new reps to take care of the Alberta, Ontario, and British Columbia. It is a great opportunity for a rep to sale an innovative product that will soon be seen all over the world. We give a great remuneration for the sale of our equipment and it is great to sale a good products that helps the end users get their job done faster with an higher quality.
Company ID: 112578 - Click Here for Full Details
Product Lines:
Non-Acid Chemical Solutions and Products that Replaces the Use of Traditional Acids like Muriatic, Phosphoric Acids; we Offer a Safe Line of Products that Outperform. 
Target Markets:
Ready Mix Companies, Masonry Supply Stores, Pre-Cast Manufacturers, Architectural Products Manufacturer, Concrete Products Manufacturer, Decorative Concrete Supply Stores, Janitorial Supply Distributors. 
Sales Opportunity:
A great opportunity in an environment where the use of safe and effective chemical use is a reality and becoming the norm; as project owners demand for safer products increase the Architects and General Contractors must respond. We are on the cutting edge of these types of products and have over a decade of offer these safe to use products in a number of industries.
Company ID: 112438 - Click Here for Full Details
Product Lines:
Heavy Equipment, Electrical Cables, and Technical Tools. 
Target Markets:
We have a Very Unique Selling Strategy and we will Sell to: Contractors, Engineers, Builders, and Hospitals. 
Sales Opportunity:
It is a good opportunity because there are many Companies looking out for individuals or companies that can supply them with original materials/tools and quality material to enable them deliver excellently. We have a good track record in our previous and current dealings with other companies. We keep to time and we offer value. Our competitive advantage is our location, pricing, quality and excellent services. Timely response and best price. 25% on the profit made.
Company ID: 111686 - Click Here for Full Details
Product Lines:
Industrial and Architectural Clear Coatings

Our Coatings Perform on Virtually Any Substrate and most are UV and Mildew Resistant. We Additionally have Clear Coats that Withstand Salt Spray from Deteriating Coatings in Harsh Environments 
Target Markets:
Our targets are Paint Retailers and Hardware Stores in Addition we Sell direct to Industrial, Hotels, Healthcare, Government, and virtually all other segments. 
Sales Opportunity:
Our company prides ourselves with quality clear coats that solve customers latent needs. We are looking for individuals nationally to help gain and service our customers. The opportunities of our clear coats may be overwhelming within various market because of the need being of such high demand. There is never a need to find prospects (they are everywhere). We distribute our product currently through major paint manufactures and soon to release within big box locations and within your market, you can grow sales as large as your market will bare.
Company ID: 112058 - Click Here for Full Details
Product Lines:
Vocational dump truck bodies. 
Target Markets:
Dealerships, distributors and end users 
Sales Opportunity:
We are currently seeking representation for the Florida market. We are a primary manufacturer of class 8 steel and aluminum dump bodies. Our bodies are high end, perfect fit, finish, and color. We are not price based sellers. If you are accustomed to a high end product and enjoy having the very best product this is your line.
Company ID: 111988 - Click Here for Full Details
Product Lines:
Our company specializes in wide and large-format printing for indoor and outdoor usage
Vynil banners
Canvas banners
Mesh banners
Car wraps
Window decals / stickers
UV flatbed printing to any substance
Constructions for banners design
Banners installation, dismantling and utilization 
Target Markets:
Advertising companies
Event planning companies
Event organizers
Real estate companies
Any companies who make campaigning
Any companies who use wide format banners for campaigning 
Sales Opportunity:
Our company was established in 2006 as a small print shop.
Today AntVision provides a full range of wide and large-format printing services and we will be expanding in the nearest years.

In addition to printing services, AntVision is ready to get you turnkey branding solutions for world-class events or advertising campaigns of any complexity worldwide.
We consult our clients on optimal materials, create a design for the information mediums, produce banners, install banners, and dismantle and utilize banners and/or special bearing structures after the campaign or events.

The strength of our products are:
- Competitive price – affordable price, cheaper than your local supplier even plus shipping
- Fast turnaround – urgent order could be finished in 1 day
- Worldwide shipping – express, air cargo, sea and train shipping are available for selection
- One-stop shopping – banners, stickers, decals, displays, signs, other products
- Commitment to excellence.

We pride ourselves on providing all our customers with the highest quality production and personalized service and we hope that some of our services will be of interest to you.

We look forward to beginning the dialogue and building cordial relations with your company.
Company ID: 111735 - Click Here for Full Details
Product Lines:
We are a Fast Setting Concrete Repair Material Manufacturer with Approvals in about 20 States.

Our Customers include Department of Transportation, Contractors, Freezer Floor Facilities, and Basically anything Involving Concrete Restoration. 
Target Markets:
Our Reps will be Selling to Various People Depending on the Application. Our Primary Targets are Department of Transportation Maintenance Managers, Maintenance of Traffic Contractors, and Concrete Restoration Contractors. 
Sales Opportunity:
Our product is unique and has characteristics that most of our competition does not. We are very established in several States, but we are looking to expand as we get approval in more States. We support our reps by providing training/material, and frequently visiting for sales calls and installations. We have our defined markets we excel in that we have a blue print of success, but there are other verticals markets that has vast potential as well. We are quickly growing company and have had increased sales for the last 5 years.
Company ID: 111568 - Click Here for Full Details
Product Lines:
High Quality VFFS Equipment.

Stand up Pack with a Tin Tie re-closable feature
Vacuum Seal Equipment (Coffee Packs that are on Cruise Lines).
Quad Seal Stand up Pouches
Oval bottom Pouches with Zippers made from roll stock 
Target Markets:
Bakery, Snacks, Coffee, Tea, Flour, Confectionary, Sugar, Pet Food, Cat Food, Bird Seed.
Dry Products
Household Detergents-Dishwasher & Laundry 
Sales Opportunity:
53 year old Business with 300+ machines placed in the USA is looking for quality packaging machinery representation.

Great reputation and fair policies for commission payments.
Company ID: 111529 - Click Here for Full Details
Product Lines:
We Help Business Reduce Utility Costs.

We Work on Contingency. If We Do Not Save, our Clients Do Not Pay. We do Gas, Electric, Storm Sewer, Sewer and Water. We Find Errors, Misclassifications, and Rate Schedule Changes. 
Target Markets:
Manufacturers, Recycling, Hotels and Motels, Apartments and Condominium Complexes, Oil Wells and Oil Processing Facilities, Sand and Gravel Pits, and Asphalt Manufacturing, and Government especially Those which Provide Water and Sewer Service to their Citizens. 
Sales Opportunity:
We have been in business for 26 years. We work on contingency. We get paid when we make recommendations that reduce our clients costs. Since we work for free if we find nothing, clients are not hard to find. We need independent sales representatives who are already selling product or services to one of the target client groups. Some of our sales reps have made up to $250,000 per year. Sales reps are paid a percentage of our revenue. Clients in these target groups have a high probability for significant reductions in utility costs. For some we can reduce those costs up to 40 percent with no investment.
Company ID: 111378 - Click Here for Full Details
Product Lines:
All Natural Stone Products Sourced from the Upper Midwest.

- Flooring/Paver Stone
- Building Stone
- Landscape Stone 
Target Markets:
We are a midwest company looking to expand nationwide. Different target markets are listed below:

Building Material Supply Centers
Stone Yards
Landscape and Garden Supply Centers
Paver/Flooring Dealers 
Sales Opportunity:
Our company is searching for established reps involved in the building material supply industry looking to add a new/exciting product line to their offerings. We are a manufacturer/wholesale supplier of all natural real stone (hence the name) products sourced from the upper Midwest. We produce some absolutely beautiful flooring/paving stones that can't be found anywhere else in the world.

Our stones are fabricated from Glacial Till Granite boulders which were deposited in the top soil by receding glaciers millions of years ago. From there, we used our patented stone cutting equipment to create a one of a kind product that is ideal for any interior/exterior application such as flooring, pavers, patios, pool surrounds, garden steppers, walkways, etc.

Any questions or worries about our ability to fill orders? This a product that we can produce with high efficiency/volume with our patented stone cutting equipment. We also have a plethora of marketing material available for you to engage the market. We look forward to developing mutually beneficial partnerships in our target markets nationwide. Please submit a sales inquiry to us today to learn more!
Company ID: 111227 - Click Here for Full Details
Product Lines:
Protective Coatings (Predominately Paint) - the Range includes High Performance Protective Coatings from a Leading Global Manufacturer, Niche Products from Household brand Rust-Oleum, as well as our Own Light Industrial Range, which can also be Modified and Adapted to Meet bespoke Requirements. 
Target Markets:
Heavy Industries - including but not limited to Offshore, Oil & Gas, Fabrication, OEMs, Contractors (Flooring, Roofing, Siding), Construction, and Builders Merchants. 
Sales Opportunity:
We are a relatively new family owned business in TX, but with the backing and support of the wider group located elsewhere in the USA and overseas. This is a fantastic opportunity to help us break into the largest coatings market in the world, with us able to offer the niche service requirements that only a company of our size can truly offer, but with the backing of global protective coating (paint) manufacturers, to meet any specification or general coating requirement.
Company ID: 110668 - Click Here for Full Details
Product Lines:
Surface Protection Films. 
Target Markets:
STAFDA Accounts, Packaging Distributors, Industrial Supply. 
Sales Opportunity:
All products made in Bensalem, PA. Great quality very competitive pricing. Protective accounts. Generous commission program. Great sales opportunity. Most areas available.
Company ID: 110771 - Click Here for Full Details
Product Lines:
Precast Trench Drain
Stainless Steel Shower Drain
Slot Drain
Catch Basins
Shallow Trench
True Radius Trench 
Target Markets:
Plumbing Supply
Plumbing Wholesalers
Waterworks and Site Supply Houses 
Sales Opportunity:
We are a can do company. The majority of our products are fabricated upon order. Our trench is focused towards the installer, once they use it they will ask for it. The trench is shipped assembled, shop drawings included. NO dealer inventory is required. We will work on a per job basis. We are currently a vendor with Ferguson, Morrison, and HD Waterworks. Excellent commission structure and a rep stocking consignment program if desired but not required.
Company ID: 110533 - Click Here for Full Details
Product Lines:
Our Patented "2 Part Activation", "Green", Bio-Degradable, Mold Remediation & Cleaning Products Tap the Power of Hydrogen Peroxide to Foam Away Mold, Mildew, Algae & other Crud.

ALSO: Sealant/Encapsulant w/ 25 Year Warranty. Rust Stain Remover. Concrete & Roof Cleaners ...and More! 
Target Markets:
Pest Control
Mold Remediation, Abatement & Restoration
Water, Fire & Smoke Damage
Pressure/Power Washing
Deck/Fence Cleaning
New Home Builders
Hardware Stores
Cleaning & Janitorial Supply
RV Dealers
Sales Opportunity:
Can you help us to take this product line to US and Canadian markets?

Generally looking for those who have the ability to take the line into 1 or more of the target markets listed above, and then on into other markets as they are able and see fit. We are looking for motivated, well-connected and self-sufficient individuals to join the team we are building.

Owners of pest control, mold remediation & restoration, pressure/power washing, deck & fence cleaning will want our products because they SAVE TIME on the clean up end of a job.

Did you know that there are Pest Control Associations for about 45 of our 50 states? Join one as an Associate Member. They will give you the Member Directory. Penetrate the membership of the association. And you will soon be moving product by the pallet and making some really good money.

We can private label for customers that are interested.

And our sealant/encapsulant offers a "25 Year Renewable Warranty", which can be used by the pest control or mold remediation business owner to generate residual income on warranty renewals, while keeping more business on the books.

Strong applicants should have:
a) Previous experience selling this type of product line, along with,
b) A significant base of existing contacts from 1 or more of the target markets listed above, that you can call into right out of the gate

This is a 1099 Contractor position. Straight Commission with Bonus Program.
Company ID: 57751 - Click Here for Full Details
Product Lines:
Instant 3 Second Industrial Strength Adhesive with Activator.

Best Wood Glue Ever! True No Wait Super Strength Adhesive, Makes Ordinary Glues Obsolete! 
Target Markets:
Canadian and USA Majors, Retail Hardware & Home, Automotive, Woodworking Suppliers, Building Suppliers, Hobby & Craft, etc. 
Sales Opportunity:
New innovative Industrial/Household Instant adhesive New to the Market True instant hold on demand when spray activator is applied. So easy to use, this product cures in as little as 3 Seconds! Imagine the freedom of an instant hold, everything else is just Kool-aid.

New must have for all industries, Wood, Stone, Automotive, Bodyshop, Steel, Plastic, Glass, Vinyl, PVC. Leather, Hobby, arts & crafts etc. Once used can't do without product! A very replenish-able product, customers will use on a regular basis. This really is the Best Glue Ever, it's not just a glue it's a tool!

The only glue you will use, makes ordinary wood glue obsolete! Truly revolutionary! Why wait for hours or days clamping or using hold down devices when you just use the adhesive on one side and apply activator on the other and hold for 3 Sec! that's it! Super strength so simple.

This is a Handyman's and woman's dream product, Serviceman go to product. Woodworkers must have product! Absolutely best glue for MDF/wood period. Every major will have to have a product like this! Home Depot Canada introduced pallet displayers in all 180 stores and is selling out!

We also manufacture a Premium Line of Granite/Marble Stone Penetrating Sealer, Stone and household Cleaner, and Granite/Marble Revitalizer/Polisher, Great price and quality. Very competitive.
Company ID: 110438 - Click Here for Full Details
Product Lines:
A Complete Line of Specially N-Terpinal Chemical Products.

The Chemicals include Non-Hazardous Paint & Coating Strippers, High Performance DeGreasers, Acid De-Scalers, Rust Inhibitors, and Custom Manufactured Chemicals for Specific Applications. 
Target Markets:
Paint & Coatings Industries, Printing Ink, Powder Coat & E-Coat industries, Automotive, Resin, Oil and Grease, Industrial Cleaing, Equipment Manufacturing, Graffiti Removal, and etc. 
Sales Opportunity:
Our Sales Reps have the ability and energy to develop and grow accounts in a designated local territory with proven sales techniques like cold calling and relationship building. Candidates must have strong desire to learn about our products and the technically proficiency to market our extensive product line to industrial, commercial, and governmental facilities. It is essential to know what differentiates our high quality products as the best available.

We are looking for enthusiastic sales people who will take ownership of their territory to realize a high level of personal and professional growth, as well as compensation. Many on our sales force have earned a six figure income in less than 3 years, and more than half of our sales force have been with us over ten years.
Company ID: 110392 - Click Here for Full Details
Product Lines:
Safety Training for Workers: Forklift Operator, Aerial Work Platform operator, MOL Approved Working at Heights, Confined Space Awareness.
Safety Consulting: Compliance Audits, Health & Safety Policy and Program Development, Job Hazard Analysis, Safe Operating Procedures, Safe Work Plans. 
Target Markets:
Construction Trades, Building Contractors, Manufacturers, Warehouse Operators. 
Sales Opportunity:
We are a small safety training and consulting company located in Burlington, Ontario. We are looking for an independent sales representative to sell safety training and consulting services to businesses in the Greater Toronto Area who operate under the Occupational Health & Safety Act and Construction or Industrial regulations.

As well as worker certification training courses such as MOL approved Working at Heights, Forklift operator and Aerial Work Platform operator, our focus is performing compliance audits that identify gaps in our client’s safety programs. Once identified, we help clients fill those gaps by assisting them develop written safety policies, programs and safe work procedures that help establish due diligence in the event of an incident.

We are a Ministry of Labour approved training provider for training workers how to work safely at heights in the construction sector. The deadline for workers to receive this training has been extended to October 1, 2017 and so this has created a window of opportunity for our company to be introduced to companies working under the construction regulations that require working at heights training for their workers as well as other training certifications.
Company ID: 110168 - Click Here for Full Details
Product Lines:
Tension Rods, Tension Cables, Compression Struts, Custom Engineered Construction Components. 
Target Markets:
Steel Contractors, Steel Fabricators, Consulting Engineers, Architects, Facade Contractors, Construction Contractors, Architectural Construction. 
Sales Opportunity:
Our company manufactures and supplies tension rods, tension cables, and compression strut systems to the construction industry. The products and systems serve both a structural and architectural purpose, and are used in such applications as: roof trusses, canopies, bridges, façade support, tensile structures, stadia, and structural bracing. We are currently looking for North American representatives to raise the company profile in the US and widen our representation.
Company ID: 27728 - Click Here for Full Details
Product Lines:
Plastic Pre-Molded Footings Used as a Footing for Construction Tubes.

Our Footings come in 4 sizes BF20, BF24, BF28, and BF36. Will Accept a Tube Diamaters from 6" to 18". Our Product is ICC Evaluated and Meets or Exceeds the Building Codes throughout North America. 
Target Markets:
Distributors of Construction Materials, Lumberyards, Hardware Stores, Concrete Supply Houses. 
Sales Opportunity:
We are interested in hiring you and or your company, to represent our product. If you are interested in becoming a rep for our products and agree to the terms and conditions listed below I would ask that you get in contact with us. We are looking for reps who would contact distributors who sell construction materials to local building supply dealers. Also, contact the local building supply dealers to see if they will allow you to set up our display at their contractor’s desk. We will supply all the materials to set up the in-store display as well as sample products.

As you can appreciate by setting up a display at the contractor’s desk this will bring attention to the contractors whereby they can immediately see the use for same. In other parts of United States this has worked extremely well. We will send you copies of the Documentation/Instruction Manuals along with copies of the Information Sheet for you to leave with each stocking dealer. Each dealer that stocks our product must have at least one copy of our Documentation and Instruction Manual as required by ESR and CCMC.

8% - First two years
7% - Third year
6% - Fourth and subsequent years

Thank you for showing an interest in our product. Wishing you all the best in the promotion of our product.
Company ID: 109934 - Click Here for Full Details
Product Lines:
Our Company is a Full Scale Signage and LED Company.

We Manufacture, Install, and Service All Types of Neon, Sign Faces, Box Cabinets, Awnings, and much more. 
Target Markets:
B2B Sales
We Sell to Every Business from Large Corporations, to Small Mom & Pop Shops. Our Clientele Ranges from very Professional Corporate Business Settings with Project Managers to Casual Meetings with Small Auto Dealership Owners. 
Sales Opportunity:
Thanks for taking the time to look into being an Account Executive with our fast paced - rapidly growing company. We are an exciting core valued, high quality based company which offers an exciting opportunity to utilize your sales skills to grow in your abilities to achieve your goals.

Our aim to acquire professional-detail-oriented people that will supply new/ potential clients the utmost attention and in turn be allowed to have unlimited growth and potential in our company, tapping into the clients/markets that we have yet to acquire. I hope that no matter what industry you're in, if you are a rock star sales rep/marketing account executive/sales director in whatever title, I would like to spend a few minutes on the phone with you to see if our company can be of fit with you.
Company ID: 109754 - Click Here for Full Details
Product Lines:
Our Products are Precision Castings for Machine Tools, which Reduce Costs, Reduce Lead Times, Provide Vibration Dampening, and can Replace Stainless Steel Structures in Chemical and Food Processing.

Machines Operate Quieter, Faster, and with Greater Accuracy and Cutting Tools Last Longer. 
Target Markets:
The Key Markets are Machine Tool, Precision Inspection, Chemical Process, and Computer Chip Processing. We also Produce Polymer Cast Rail Ties for the Commuter Trains. 
Sales Opportunity:
We provide a 10% sales commission for the first castings order and 7% thereafter. Once the sale is made, the sales rep typically has much less involvement as we handle most of the customer service from our headquarters. You do not have to worry about the "next order" going to a competitor as the customer is locked into our process.
Company ID: 106486 - Click Here for Full Details
Product Lines:
Our Company Makes the World Finest Authentic Wood Fired Ovens.

All USA Made since 2005. We Make our Ovens Exactly per the Old Neapolitan Tradition + all the Technology of our days. No other manufacturer has our Unique Design and Formula of the Finest Materials. 
Target Markets:
Home and Gardens, Wholesale and Retail
Masonry Yards
Outdoor Living Industry
Sales Opportunity:
We've been in business since 2005 and since than made the finest ovens all USA made. We need reps all over the country so that we are not depending on internet sales only. We are looking to set up dealerships all over the USA. Pricing is the most attractive in the industry. Quality is the top.
Company ID: 109626 - Click Here for Full Details
Product Lines:
Crawl Space Vapor Barrier.

Recessed Light Cover is your Best Insurance Against Fire Caused by Heat Build-Ups Due to Insulation. Our Radiant Shield is Composed of White Cross-Woven Polyethylene, High Density Closed Cell Foam, & Low Emissive Reflective Foil. 
Target Markets:
Sales Opportunity:
Our comapny creates cutting edge insulation, building products and accessories for a variety of industries. The design and ingenuity of these products reflects our mission: to change everyday building challenges into practical solutions using science, research, and technology. Our solutions help create and sustain energy efficient and weather protected homes and buildings. Top brands include: Tarp Under Slab Insulation, Vapor Barriers, Recessed Light Cover, High Performance Films, Radiant Barriers, Reflective Insulation, House Wrap, Proof Roofing Underlayment.
Company ID: 108117 - Click Here for Full Details
Product Lines:
Crystalline Waterproofing for Concrete:
- Coating: Tunnels, Tanks, Culverts, Parking Garages, Decks, Roofs, and more.
- Admixture: Dams, Aquariums, Utility Vaults, Foundations, Slab on Grade.
- Concrete Repair: Patching Compounds, Repair Mortars, and Cement Parge Coats for Concrete Rehabilitation. 
Target Markets:
Spec Driven: Sell to Architects, Engineers, Contractors
Customers: Distributors, Ready-Mix Concrete, Precast Concrete 
Sales Opportunity:
This is a very lucrative opportunity for a fast-growing region selling products for a top crystalline waterproofing manufacturer in the country. Chemical admixtures for concrete are growing at an all time rate and the properties of crystalline waterproofing could not be any better for this region.

This product is long-standing and trusted around the country and around the world and we are looking for You to get it specified in new and existing concrete projects and to manage the accounts that we sell to i.e. concrete producers and construction supply distributors. Sales via education will be big for your customers, as most of the time it is an easy sale, the customer just didn't know of your product. We will provide you the knowledge and tools necessary to be successful.
Company ID: 109315 - Click Here for Full Details
Product Lines:
Custom Fabricated Steel, Fabrication, and Welding.

All Custom Fabrication in Steel from 16ga. to 1/2 Plate. and Stainless Steel from 16ga. to 1/4 plt. Cutting, Forming, Rolling, Mig Welding, and Tig Welding Fabrication of all Structural Shapes. 
Target Markets:
Anyone interested in Custom Steel Fabrication. Currently Selling to the Specialty Concrete Forming Industries. Door Frames and Hardware for the Traffic Door Industry. Opened to almost any industry. 
Sales Opportunity:
Small shop with 30 years Experience. Currently fabricating custom parts for large concrete form company, custom pump bases and guards, target ranges, door frames (steel and stainless steel), and hardware for door manufacturer. Our company has been at its location for 30 yrs. and has done work on World Trade Center #3 and the I265 bridge in Louisville Ky. just to name a few of our projects.
Company ID: 109242 - Click Here for Full Details
Product Lines:
Concrete Restoration
PDC Asphalt Rejuvenation
Rust Inhibiting Coatings 
Target Markets:
Contractors, Businesses, Landlords, Municipalities, State and Local Departments of Transportation, any Business with Concrete or Asphalt. 
Sales Opportunity:
This is a new, emerging marketplace with a huge potential customer base. These products are designed to restore and rejuvenate, saving customers hundreds of thousands of dollars, to which you get a commission based on the gross sale of each job. We will support you with marketing materials in the form of PDFs, a website, photos, multimedia and more. These products are designed to rejuvenate and restore damaged infastructure - which is a very hot topic in today's political climate.



Canandaigua Chamber of Commerce


© 2018