Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
  Lost Password
     HomeFind Sales RepsFind Product LinesSales Opportunities     
\Directory\Construction\Engineering Services
Click on Company ID to View Full Details
Company ID: 8113 - Click Here for Full DetailsUpdated
Product Lines:
Target A - Fiber for Concrete Reinforcement.
Target B - Fiber for Asphalt Reinforcement.
Target C - Coatings and Sealers. 
Target Markets:
Target A - Ready-Mix and/or Pre-Cast Producers, Architects, Engineers, and Concrete Contractors.
Target B - Contractors, Pavers, Producers, Engineers, DOT's, Township Supervisors, and Large Property Owners.
Target C - Property Developers/Managers, Distributors, Engineers, and Architects. 
Sales Opportunity:
FORTA® is a growing company with three divisions, Concrete, Asphalt (FORTA-FI®), and Coatings & Sealers (Arisfor®). This is an exceptional opportunity to work with a growing company that understands the value of providing support to their independent sales representatives. You will benefit from an industry-leading commission program, as well an excellent training program to introduce you to our products and services and continued training as needed. We are known for our top of the line support staff and friendliness. When you work with us, you are part of our family!

Territories Open:
Fiber for concrete reinforcement - MT, OK, N. TX, N. CA, SW. NV, OR and WA.
Fiber for asphalt reinforcement - TN, MS, NC, SC, AL, GA, and FL.
Coatings and Sealers - TN, MS, NC, SC, AL, TX, OK, and GA.
Company ID: 28327 - Click Here for Full DetailsUpdated
Product Lines:
Moisture Mitigation Systems, Epoxy Coatings Cementicious Underlayments. 
Target Markets:
Architects, Specifiers, General Contractors, Restoration Contractors, Surface Prep Contractors, Flooring Contractors, Waterproofing Contractors, Concrete Contractors, Epoxy Contractors, Coatings Contractors. 
Sales Opportunity:
Our company has specialized in moisture mitigation and self leveling cements. High commission and protected territory. New state of the art production facility in the USA. Seeking reps in select areas.
Company ID: 110507 - Click Here for Full Details
Product Lines:
FRP Wall Panels, Integrated FRP Faced Prefabricated Wall Protection Curbs, Cooler, Freezer, and Personnel Doors and a Line of Hygienic Bollards and Guardrails.

All of our Products are Designed to Help the Food Industry and pharmaceutical to be Compliant. Our products are of the highest quality. 
Target Markets:
Food Processors, Pharmaceutical Companies, Architects, Contractors, Engineers, and Cold Storage Construction Companies. 
Sales Opportunity:
Ours is a family business based out of Wisconsin USA for the last 50 years. Originally started in the commercial construction industry, specializing in cold storage and food processing plants. This lifetime of experience has enabled us to understand the importance of quality in all aspects of hygienic environment construction.

We are currently looking for independent sales reps to market our products to the food processing and pharmaceutical industries. We will also need our products brought before architects and engineers that are specifying the projects.

We pride ourselves on keeping ahead of safe building codes and always looking for ways to improve the quality of our products. We provide high commission rates, sales literature, exclusive territory options, lead management system, along with company on call support.
Company ID: 108062 - Click Here for Full Details
Product Lines:
Let's add Plastic Machined Parts to your line.

We specialize and focus on Plastic Machined Parts: CNC Machine Shop & Plastic Distributor of Plastic Sheet, Rod, Tube & Cut to Size Pieces.
General CNC Equipment: CNC Mills (4th Axis), CNC Lathes (Live Tooling), CNC Routers & CNC Panel Saws. 
Target Markets:
Our Primary Focus is with Original Equipment Manufacturers of: Food Processing, Conveyor, Packaging, Bottle Filling and Liquid Filling, Crane, Agriculture, Heavy Equipment, RV, Automation, Marine, Chemical Processing (Oil & Gas), Semiconductor, Electrical/Inuslator, Etc.. 
Sales Opportunity:
Konrady Plastics manufactures precision plastic machined parts with exceptional quality that meets our customer's on time delivery requirements. Our primary customer base is with original equipment manufactures who have plastic parts needs. We specialize in both custom and production parts.

Quantities range from 5 to 15,000 pieces.

In 2017 Konrady Plastics doubled the size of our footprint to 52,000 Sq. Ft.. We have added additional CNC Equipment to expand our capacity for plastic machined parts output. We have multi-axis lathes and mills and are equipped to support sales growth. We also have a plan to invest in new equipment & capabilities as we grow our customer base. We are looking to double our production through new and current customer requirements. Let's grow together!
Company ID: 111824 - Click Here for Full Details
Product Lines:
Full Line of Wiring Devices with many New Innovative Items, including Smart Dimmers and High Speed USB Charging Outlets.

We are the Manufacturer and our Product is Inventoried in the US at our Jacksonville, Fl. Location. 
Target Markets:
Electrical Wholesale Distributors, Architects, Contractors, Engineers, and Industrial Accounts. 
Sales Opportunity:
We have experience working successfully with Manufacturers Representatives. We will consider extended terms for the right Rep Agency. We DO NOT have house accounts in Rep territories. We will work with the Agency to structure a commission contract favorable to both parties.
Company ID: 109588 - Click Here for Full Details
Product Lines:
Electrical Safety, Safety Consulting, Electrical Analysis, OSHA Compliance, NFPA70E, NFPA70B Compliance, Safety Training & Technical Sales. 
Target Markets:
All Manufacturing & Industrial Plants, Food & Beverage, Plastics Plants, Steel & Stamping Operations, Chemical Plants, Utilities, Oil & Gas Industry. Customer list includes: Disney, Amway, Kellogg's, Pepsi, Tito's Vodka. 
Sales Opportunity:
Wow, We're Growing!

We have an Outstanding Opportunity with Huge Earning potential. Everything is in place for Huge growth. We currently have over 670 industrial distributor locations selling our services across the United States with more to come. We need Reps in the following areas of the states: WI, upstate NY, CO, Northwest and the Massachusetts We need you today. With earnings easy from $100,000 to $250,000.

We can help build your existing business & increase your revenue with generous commission base with repeat business. This is an excellent opportunity to a firm that is ready to drive sales. We promise to make you look good! Submit a sales inquiry to us and get ready to grow!

We supply training of your sales staff, Literature and most of all excellent support to help you grow your business. We want to invest in You! Submit a sales inquiry to us you will be glad you did. You will actually be doing a service to your customers by protecting their employees from electrical incidents and reduce their insurance premiums.

Following OSHA Regulations, employers are responsible to provide a safe workplace for electricians working in their facilitates. Using NFPA70-E Standards as a guideline,while doing a electrical safety analysis of the manufacturing facility. We provide a A to Z approach our customer to comply with OSHA regulations. Over the last 10 years we have received 5 phone calls saying thank you for your services, you saved my life today.
Company ID: 111338 - Click Here for Full Details
Product Lines:
Gaulhofer high quality window and door systems manufactured in Austria. This includes custom door and window systems. We also have access to top quality thermally broken all-aluminum window and door systems for Germany. 
Target Markets:
Custom Homebuilders, architects, envelope engineers, general contractors, private customers 
Sales Opportunity:
This is a good opportunity for a energetic, technical minded self starter that is comfortable speaking with affluent clients, high-end custom home builders, architects and building envelope consultants. Gaulhofer Canada is a young growing company expanding across Canada and is looking for experienced Sales representatives with a good network in the residential and multi-family industry.

Gaulhofer Canada offers a top-level commission structure compared to other window companies and offers support to its sales team as required. Support is dependant on experience and commitment to the Gaulhofer brand.

Gaulhofer is considered one of the top quality window products available in the world and we are proud to represent Gaulhofer on the Canadian market.
Company ID: 107993 - Click Here for Full Details
Product Lines:
Our Primary Product Line is Industrial, Structural, and Miscellaneous Steel Fabrication.

We also Have a Second Product line of Industrial Shop Fireproofing. We are Certified to Apply Both Intumescent and Lightweight Cement Fireproofing. 
Target Markets:
Our target markets are Large EPC Companies in the Industrial Market such as Bechtel, Jacobs, CB&I, KBR, Burns & McDonnell, etc. We also call on End-Users such as Valero, Motiva, Entergy, Formosa, Monsanto, etc. We primarily serve the Chemical, Oil and Gas Refining and Power Industry. 
Sales Opportunity:
We are seeking a motivated sales rep with existing knowledge of the markets we serve.

Family owned industrial steel fabrication company which has been in business since 1986. We operate with the industry’s most up to date technologies like 3D modeling, barcode scanning, and computer automated equipment with robotics. We are unique fabricator in we offer a multitude of in-house services.

We offer in-house detailing utilizing Design Data SDS/2 3D modeling software, connection design with PE Stamp, in-house complex coating facility with cryogenic, intumescent and light weight cement fireproofing certifications. Our fabrication facility is certified by AISC and our welding program is certified to AWS D1.1 and CWB 47.1. Our fabrication facility is 300,000 square feet on 60 acres and our annual capacity exceeds 30,000 tons. We have a great track record of quality, service and timely delivery.
Company ID: 111080 - Click Here for Full Details
Product Lines:
Our Firm Designs, Engineers, and Manufacturers Structural Composite Roof Deck Systems.

Our System has been Used for 48 years on Structures from 1,000 sq.ft. to 1,000,000 sq. ft. It is Used on Flat, Sloped, and Curved Roof Structures. Installation is by Licensed and Trained Roofing Contractors. 
Target Markets:
Markets are Elementary Schools, High Schools, Colleges and Universities, Elderly Care Facilities, Public Structures (Airports, Court Houses, Fire Stations, Police Stations) and Structures that are Built for Long Term Service. Sales are Made to Architects and Engineers Designing the Structures. 
Sales Opportunity:
Our company has the potential to become a reps most profitable account. While it has a lead time since it must be designed in the structure, once designed into the structure it is very difficult to change due to the performance it provides. It has areas of performance that competitive systems can not match. We are a set-up to provide our agents total support on designs and engineering in a timely manner, allowing them to be responsive to the Architect or Engineers questions and needs.

We provide warranties from 10 years to 40 years depending on the system and installers guarantee their workmanship for the same time. This is a unique performance warranty that is unmatched in the industry. Commissions are paid on the number of sq. ft. in the roof deck area plus edge supports details. Our top producers earn six figure incomes annually.
Company ID: 100581 - Click Here for Full Details
Product Lines:
Revolutionary/Innovative Technology to Enhance the Profit Margins for All Parties.

Patented Side Stream Ultra Sophisticated (Particle Precipitator) Filtration System for Chillers, Water Towers, and Boilers. Simple Installation, with Average of Two years or less ROI. 
Target Markets:
Large Commercial, Industrial and Institutional Facilities. Also Mechanical Contractors, Chemical Water Treatment Suppliers and Building Automation Contractors. Great Opportunity for Individuals with Existing Relationships with Facility Managers, CFOs, etc. 
Sales Opportunity:
Open Territory to include all US. Average Sale $100,000 plus installation, service agreements, and replacement parts, etc. Our Systems enhance the operation and profit margins for Sales Organization, Mechanical Contractor, Chemical Suppliers, and Facility Operators. This is a Sales Commission opportunity, simple referrals 2.5% to full blown Sales Presentation 10% Commission, the option is up to the Sales Representative.
Company ID: 22831 - Click Here for Full Details
Product Lines:
We are a Leading Manufacturer of Patented Stormwater Treatment Systems.

Each System is Custom Engineered for Site Specific Projects. We offer 3 areas of treatment:
Catch Basin Insert
Hydrodynamic Separation
Treatment Train Filtration Technology 
Target Markets:
Experience Working with Municipalities, Design Engineers, Architects, and Contractors will be the Targets. Our Reseach & Engineering Departments will Support your Efforts in all Areas of Sales. We Work Closely with the Regulators within your Territory to Achieve Acceptance of our Technology. 
Sales Opportunity:
Independently sell and market our products to decision makers that have immediate needs for stormwater treatment systems. We are a leading manufacturer of stormwater treatment systems. High demand and new markets for our products have created a rare opportunity for select independent representatives in exclusive territories. High commissions with fully supported engineered solutions. Bring your technical sales ability and we'll handle the administrative and engineering support.
Company ID: 109083 - Click Here for Full Details
Product Lines:
We Manufacture a Premium, 100% Recycled Rubber Rooftop Pipe, Conduit, Duct, Solar Support that Spans Many Industries.

We have 5 SKUs that Consist of 85% of the Business but we also do many Custom Assemblies for Govenrnment and Private Industries alike. 
Target Markets:
1) Electrical/Mechanical Contractors Direct
2) HVAC Direct
3) Solar Contractors Direct
4) Sheet Metal Direct
5) Roofing Wholesale or Direct 
Sales Opportunity:
We recently purchased a 30,000 sq. ft. facility and as such have increased our manufacturing capacity nearly 4X. As a result, we now have the inventory to support Sales Reps in new territories and markets previously ignored. We are the low cost producer of this type of support in the world. Even China can't compete with us.

We have 5 North American warehouses with plans to buy 2 more by the end of 2017. What this means, is you'll have access to the right product, at the right price, with industry low lead times. This is an estimated $190 million per year industry and growing 10-15% per year as wood is being written out of the building code in most states. We have opportunities all over the continent so apply today!
Company ID: 106563 - Click Here for Full Details
Product Lines:
Attachment Business for Excavator and Wheel Loader Attachments, Standard or Custom.

We Manufacture Buckets, Thumbs, Rakes, Couplers for Wheel Loaders, etc. We also have a Product Line that is New to us that Adds Length to an Existing Excavator Stick Static or Dynamic. 
Target Markets:
End-Users and/or Construction Dealers, Companies that do Ditch Cleaning, Fly Ash Loading, Sediment Pond Cleanup, E.P.A. Cleanup, Dredging, Demolition, Slurry Trench Digging, Underwater Excavation, Stand Pipe Excavation, Canal Digging, Subway Construction. 
Sales Opportunity:
This is a privately owned business, consisting of inside sales, engineering, manufacturing, warranty, and service. As some of the products have competition the excavator extensions have less, and the name is the original in the business. Reps will be invited to the factory and have a day of training. Also introduced to the personnel who will help support their calls and who might travel with when requested or needed.
Company ID: 103460 - Click Here for Full Details
Product Lines:
We are Trailblazing Telecom Carrier Engineers with 30+ years Industry Insight.

See Homepage Video for Designs in Layman's Terms. (Not Bill Auditors or Sales Folks Wearing Lab Coats). We Design, Broker, and Manage our Client's Telecom. (Highly Advanced Hired Guns; Far from the Typical Offering). 
Target Markets:
We Work with All Industries and Serve all Locations within the USA and Canada Focusing on the Small to Medium Size Business Market (50-5,000 employees). Phone Companies Pay Us to Join their IT Team as WAN Experts, Saving Client's Money and Aggravation. 
Sales Opportunity:
Our company (with insight shared by less than 1% of the industry!) is truly a ‘one of a kind’ turn-key telecom solutions provider that designs, brokers, and manages our client’s network and cloud environment. Our goal is to save our clients money and aggravation the correct way by taking an engineering approach to cost savings and network optimization.

We are a Carrier engineering firm who actually:
 Designed and built the phone company central office equipment
 Designed and built the telecom provider’s core networks
 Helped define the services you buy from those carriers
 And developed their provisioning procedures

This affords us the unique intellect and capacity to understand and address their deficiencies. Please allow me to acquaint you with the significant value-add that comes from a highly influential engineering firm handling the design, procurement, and management of your telecom accounts…at no new or additional fees than what you already pay today, just highly improved performance and savings.

We make it possible for downsized IT teams to survive and thrive in an age of budget cuts. Please submit a sales inquiry to us, and we will email a link for an intro video to explain. Thank you.
Company ID: 102915 - Click Here for Full Details
Product Lines:
High Performance Composite (CFRP) Systems Used in the Repair and Rehabilitation of Steel Reinforced Concrete Structures. Blast Mitigation, Structural Upgrades, Siesmic Protection, Corrosion Repair. 
Target Markets:
Calling on Specifiers, Contractors, Property Owners, Municipalities, DOT, DOD, Nuclear Power Industry, Utility Companies. 
Sales Opportunity:
Looking for commission only sales representatives to add our product line to their existing tool bag. The sales call for these products typically elevates to a technical discussion early in the sales process. Most projects will require product/project engineering support provided by our company in most cases. Our product line would be considered a very Niche product line.
Company ID: 75426 - Click Here for Full Details
Product Lines:
Our company Manufactures and Sells GNSS Signal Distribution Products, Solutions and Services We have the Flexibility and Technical Know-How to Design and Deliver Complete Solutions for your Unique GNSS Signal Distribution Needs. 
Target Markets:
• Public Safety
• Defense
• Wireless/Telecommunications
• Aviation
• Retail
• Government
• Manufacturing
• Railroad
• Car Rentals
• Exhibition Facilities
• Automotive Distribution 
Sales Opportunity:
This opportunity is tremendous because the market is large, the cost savings to the customer and the business process made simpler for the customer, makes for a "Must Have Solution". Our company is a leading innovator in the industry which custom configures GPS solutions to any customer's specific application.The company also has an exclusive patent on one of the products, making us a leader in the GPS solution space.

Rep support includes:
• Highest quality products from the global leader
• Partner Onboarding and Training
• Technical Assistance
• Sales Rep Kit
The commission structure is 10%.
Company ID: 89244 - Click Here for Full Details
Product Lines:
High Quality Coil Springs - Hot Wound and Cold Wound
Material Size Range - Cold Wound .375"-.625"; Hot Wound .562"-2.000"
Compression Springs, Extension Springs, Torsion Springs
Coil Springs Made to Customers Drawings
Coil Springs Made to Customers' Requirements - Design to Suit 
Target Markets:
Original Equipment Manufacturers
Industries include Valves, Conveyors, Snow Plows, Agriculture, Aggregate
Companies Requiring Replacement Coil Springs
Distributors of Aftermarket Automotive Suspension Parts 
Sales Opportunity:
We are a coil spring manufacturer in western Canada with sales across Canada and the USA. Our coil springs are made in Canada using high quality raw material. We are able to meet the exacting requirements for both physical dimensions and load characteristics of our customers. All processes required in the manufacture of coil springs are done in house. Customer satisfaction is high.
Company ID: 112571 - Click Here for Full Details
Product Lines:
Powder Coated Aluminum Railing, Picket, Glass & Topless Glass Railing. 
Target Markets:
General Contractors, Sub-Contractors, Glaziers, Fence Installers, Deck Companies. 
Sales Opportunity:
Our company is a highly specialized manufacturer of custom and standard aluminum railing products. We are the leading name in manufacturing and installing quality aluminum railing in the multifamily products since 1985. Our 20,000 square foot fabrication facility is designed for high-volume multi-family and mixed use residential aluminum production and powder coat finishing. Our product line includes aluminum railing, gates, fencing, pool surrounds, handrails, privacy screens and more.

We can supply a custom designed railing system to suit your specific needs or you can choose from our pre-designed packages. Our experienced in-house drafting department and installers can provide start to finish railing solutions. Our talented welders will ensure that your products are made to the highest standard. Our powder-coating facility ensures that the end products durability and versatility. Have confidence in choosing a quality our products.
Company ID: 112526 - Click Here for Full Details
Product Lines:
We are a Full Line Manufacturer of Bathroom Partitions.

We Offer a Wide Range of Materials with a Large Assortment of Mounting Styles. Our Materials are Stainless Steel, Powder Coated, Solid Plastic, Plastic Laminate, and Phenolic. 
Target Markets:
We are Looking to Reach Architects and Designers to Show our Quality Over our Competitors and Present our Competitive Pricing. We are also looking to Reach Building Material Suppliers and Suppliers of Division 10 Materials to Sell Direct or have as Stock Agents Across the Country. 
Sales Opportunity:
We are leaders in our industry for nearly 50 years, offer the highest quality partitions on the market. What sets us apart from our competitors is our higher quality steel, welded and grounded smooth corners, embossed doors for added strength and cleaner look, our double faced honeycomb core, and our interlocked moldings for added strength. We stock our full line of stainless steel partitions which can be ship out immediately and offer one to two day shipment on our full line of our powder coated partitions.
Company ID: 112438 - Click Here for Full Details
Product Lines:
Heavy Equipment, Electrical Cables, and Technical Tools. 
Target Markets:
We have a Very Unique Selling Strategy and we will Sell to: Contractors, Engineers, Builders, and Hospitals. 
Sales Opportunity:
It is a good opportunity because there are many Companies looking out for individuals or companies that can supply them with original materials/tools and quality material to enable them deliver excellently. We have a good track record in our previous and current dealings with other companies. We keep to time and we offer value. Our competitive advantage is our location, pricing, quality and excellent services. Timely response and best price. 25% on the profit made.
Company ID: 112316 - Click Here for Full Details
Product Lines:
Prefabricated, Complete Site-Built, Tornado Shelters for Schools, Daycare Centers, Businesses, and County/Municipal Sheltering.

Shelters Meet IBC 2015, ICC 500, and FEMA 361 for Residential and Community Tornado Shelters. Shelter Sizes and Shapes are Customer Driven. 
Target Markets:
Target markets are Schools, Daycare Centers with less than 50 Occupants, EOC, Police, Ambulance Facilities, and Businesses in FEMA-361 250 mph Wind Zone. Sales Contacts are Architects, Engineers, and Contractors for Schools, Daycare Centers, EOC Facilities, and Businesses. 
Sales Opportunity:
Our tornado shelters are able to retrofit into existing buildings (corridors, classrooms, etc.) without altering the architecture, structural integrity, or function of the facility. This capability is unique to our product. Construction is easily accomplished within school vacation periods without disrupting school schedules.

Installation is typically done as a subcontractor to a construction firm under supervision of a local registered design professional. We have been in business continuously since 1996 and are a founding Producer Member of the National Storm Shelter Association.

Company staff includes registered engineers with decades of experience in design and construction of tornado shelters, a website, design drawings for standard tornado shelters, illustrated assembly instructions, installation checklists, and inspection reports,and videos of construction of tornado shelters in school corridors and as fortified daycare facilities. Company provides necessary technical training to sales reps.
Company ID: 112236 - Click Here for Full Details
Product Lines:
Our Company is Recognized as a Leader in New and Replacement Custom and Standard Skylights for Commercial, Industrial, and Residential Applications.

We also Offer a Line of Energy Star Products. 
Target Markets:
Architects, Contractors, Engineers, Roofing Contractors, Developers. 
Sales Opportunity:
Our company is a 100% owned and operated family business for 40 years, located in Woodbridge, Ontario. A proud manufacturer that is engaged in the design, development, marketing and selling of quality residential, commercial and industrial skylights in Canada and the United States. Our goal is to target European and Middle East markets. In addition to our broad range of standard and custom skylights, we are committed to Energy Conservation with our line of Energy Star products.

Our company is an Equal Opportunity Employer and Prohibits Discrimination and Harassment. All qualified applicants are welcome to apply and will receive consideration for employment based on company needs, job requirements and individual qualifications. We offer: Salary, Commission, Bonuses, Benefits, RRSP, Incentives, Ongoing training.
Company ID: 112088 - Click Here for Full Details
Product Lines:
Printed Circuit Boards Manufacturing and Assembly. 
Target Markets:
Sales Opportunity:
PCB & PCBA market is booming we have local and offshore mfg services. We been in business since 1983 with 34 year experience. We pay higher commission than other PCB manufacturer with strong product support and services. We have all in house process from Design to Manufacturing and Assembly. We pay monthly commission of received funds.
Company ID: 112046 - Click Here for Full Details
Product Lines:
Our product lines include: Industrial Line Cleaning Solutions; Pulsed Light Technology, Conveyor Lubrication; Dosing; Chemical Storage, Water Treatment, Plant Engineering; Automation & Control; Control Cabinet Design/Build; Piping Design/Build; Tank & Container Cleaning; and Filter Beads. 
Target Markets:
Our target market is small, medium and large North American food and beverage processors and producers. 
Sales Opportunity:
We are looking for the ideal candidate for our new subsidiary company ‘North America’ to join our team for the position of Key Account Manager.

Reporting to the Global Sales Director, the Key Account Manager will be responsible for:
- Business development with existing and potential North American customers in our new subsidiary company
- Maintain and grow an active customer base of OEM’s and end customers
- Analyze customers' businesses and seek new business opportunities in key success areas and needs
- Manage pricing to assigned accounts and impulses for product innovations
- Provide technical support to assigned customers as required / with the collaboration with our German project department
- Manage and take over responsibility of the new subsidiary and its development
- Plan and communicate the business building activities and direction of the new subsidiary to senior management
- Build and follow the business plan with a view to meet or exceed goals /objectives

- Commercial or technical studies for chemical and technical questions, professional experience or completed a post-secondary education
- Results and solutions oriented
- Excellent verbal and written communication and analytical skills
- Experienced in sales of equipment for the food and beverage industry
- Expertise to establish a climate of trust with customer decision makers
- Strong presentation & computer skills
- Travel required ~3 days a week
Company ID: 112022 - Click Here for Full Details
Product Lines:
Wireless Flow Meters, BTU Meters, Process Controllers that can be Programmed to Meet a Variety of Needs.

Can Use 4 to 20 mA 1 to 10 VDC Signals to Generate Data Based on Custom Program and Use Data to Create Databases all of which are in Modbus or Backnet Compatible Format. 
Target Markets:
Building Owners Updating Old Buildings, Mechanical Engineers Designing Mechanical Systems in Buildings, Energy Auditing Companies. 
Sales Opportunity:
This is a unique opportunity to get in on the ground floor of 2.4 Ghz wireless technology instrumentation. BTU information, flow meter and energy automation without the expense of wiring back to the central control board. the signals are collected by a mesh gate attached to the central computer. Data collected can be saved and automatic reports to the building manager or R/E management can be sent on monthly, weekly or daily.

The result of one such set of monthly reports resulted in the recognition that a chiller was not being used efficiently and replacement of the circulating pump with a variable speed pump controlled by the BTU meter resulted in a power saving of $3,500 per year. That is $35,000 in 10 years and the power company paid for part of the new pump installation costs. Power supplier does not have an unlimited amount of power available.
Company ID: 111904 - Click Here for Full Details
Product Lines:
Pumps, Meters, Hose Reels, Fluid Management for oil, grease, ww wash, air/water, def, and fuel. 
Target Markets:
distributors,car dealerships, oem, oil jobbers, national accounts 
Sales Opportunity:
Opportunity to work with the premier lubrication equipment solutions provider in North America. We pay 7% commissions on all sales/monthly...............
Company ID: 111570 - Click Here for Full Details
Product Lines:
Our Offerings Range from Standard to Built to Spec to Custom Made, Fully Wired, and Tested Cable Harness Assemblies, Components, Fittings, Adapters, Reducers, and Enlargers for Any Thread Scenario or Situation. 
Target Markets:
Transit Authorities, Light Rail, Bus, Hybrid, Wind Power, Solar, OEMs, Automation, and Robotic Environments. 
Sales Opportunity:
Our company is the preeminent developer and provider of comprehensive wire and cable protection solutions. Customers rely on our products and services to protect electrical systems in mechanically demanding applications and harsh environments.
Company ID: 111413 - Click Here for Full Details
Product Lines:
Industrial: Commercial and Residential Floor Coatings.
Resin Systems include: Cementitious Urethanes, Epoxies, Urethanes, Polyureas, Polyaspartics, Novolacs, and Hybrids. 
Target Markets:
Markets include Food and Beverage, Aerospace, Electronics, Light to Heavy Manufacturing, Restaurants, Schools, Government, Cold Storage, Warehousing, Garages, and more. 
Sales Opportunity:
Large reputable manufacturer of engineered floor coatings is seeking an experienced individual or rep firm to handle day to day sales and promotion activities in a protected territory. You will receive full support including marketing tools, product training, technical assistance, and sales leads. Sales are primarily direct to contractors, with some distributor activity. This is a straight commission position, no salary, benefits, or draws.
Company ID: 111352 - Click Here for Full Details
Product Lines:
Scalable, Highly Secure Data Centers, and Sensitive Facilities. 
Target Markets:
Sales Opportunity:
Our comapny provides turnkey mission critical data centers and Sensitive Facilities to both the private and public sectors. We have realized tremendous success in the public sector recently due to years of building its USG market and is seeking a Rep to aggressively pursue and expand this market as well as support existing partners.
Company ID: 111255 - Click Here for Full Details
Product Lines:
Custom Plastic Injection Molding, Medical Clean-Room Molding, Design Engineering, Mold Manufacturing, Assembly, Testing, and Packaging.

From Concept Prototyping to Tooling, Validation, Short and Long Run Production 
Target Markets:
Aerospace, Commercial, Consumer, Medical, Electronic, Defense, etc 
Sales Opportunity:
We are looking for a highly motivated Sales Rep to make our company excel and take the big jump into growth. We are actively looking into growing our customer base and are compensating our Sales Rep with 10% commission on production orders.
Company ID: 111166 - Click Here for Full Details
Product Lines:
Insulated Metal-Clad Panels of Varied Thicknesses, Profiles, Surface Textures, and Coatings.

These Panels Meet Many Industry and International Standards for many Construction and Renovation Applications. 
Target Markets:
Contractors, Builders, and Designers of the following: Refrigerated and Frozen Product Warehouses, Climate and Humidity Controlled Rooms, Pharmaceutical Warehouses, Food Processing Plants, Commercial, and Residential Structures, etc. 
Sales Opportunity:
Do you know "big players" and contractors in the Refrigerated and Frozen warehouse business? Do you currently sell Commercial Refrigeration Equipment to the temperature-controlled food and pharmaceutical goods sectors? Do you have contacts in the construction materials and energy conservation businesses?

Would you like to work with an experienced National Sales Team leader who also has worked as an Independent Rep? If so, we really want to talk with you! With our high product quality and responsive, customer-oriented business culture, we can build real and lasting success together.

Our 2" - 6" thick panels can be used for building refrigerated spaces, freezer rooms, climate-controlled chambers or clean rooms of any size. The panels also are excellent, competitive alternatives for many general roofing and external building panel applications, both commercial and, yes, even residential!

High R-values, exceptional sealing properties and low installation costs make our panels ideal for many innovative applications. Our panels have been installed in Europe, South America and Central America. Our panels meet many Product Quality and Performance standards. Now we are beginning to do business in the US, and are building a North American Sales Team.

A broad variety of available surface coatings ensures that there is a good fit for almost any customer's requirements. Please submit a sales inquiry to us today to see if we can work together to create a "win-win" scenario! Thank you.
Company ID: 111163 - Click Here for Full Details
Product Lines:
Application Support for any IT or Technology Division, Technical or Marketing Department or Business Units.

We Offer Exciting Service Packages for Companies of All Sizes. 
Target Markets:
Any Small to Mid-Size Business Across Industries who have IT Systems or Websites that Need to be Managed and Maintained to Keep the Lights-On their Businesses. 
Sales Opportunity:
We are looking for a hardworking, sincere to learn Sales Person who is looking to grow within the Software and technology industry. We are looking for an enthusiastic, energetic individual who has strong desire to generate high level income. Positive and motivated personality that enjoys working in selling different types of software and technology solutions.

We are offering a 20-25% commission on revenue for selling our Services – monthly range from $1,500 - $10,000 with potential profit-shares opportunity. Our services packages offer a great opportunity for reps that have strong relationships within industries to add/extend Technology Support as a new line that will help their clients save money and maintain the applications. 100% Commission based compensation. Huge potential of career growth or business opportunities within young growing company.
Company ID: 111155 - Click Here for Full Details
Product Lines:
Sub-Domains, Offering Press Releases for Businesses in Regional Areas. Banners, Branding Portfolios, Sales in all States for Sub-Domains, Medical, Plastic Surgery, Builders, Golf, Shopping, Travel, Dining, Community Service Guide, Real Estate, Commercial, Electrical, Pet Guides/Veterinarians. 
Target Markets:
Plastic Surgery PSA, Builder BA, Contractors, Golfing Magazines, Courses, Clubs, Travel Agencies, Dining Places, Country Clubs, Community Service Guide, Real Estate Franchises, Commercial Leasing Companies, Commercial Real Estate Guide, Commercial Electrical Guide. 
Sales Opportunity:
Our company is the industry leader that engineers systems that provide private branding and press releases for referred clients. Our company works through referrals and after meeting your contacts and gathering the referrals of 6 individuals that company would stand behind we build unique networks. The solution to selling our advertising services and and sub-domains are really limited rather a small company or a franchise that can let us know their targeted areas for placement. Keeping the costs and portfolio's are affordable and allow the corporate branding on a whole different level of domain process to corporate image.

We support our representatives with phone, virtual face to face, training for the services offered. *With advertising & Marketing this is a write-off for your clients. Representatives are sub-contractors and will complete the Layout and Press release for the client with photo and business information. Send via email to our office with all information in package. Our commission structure depends on the areas and counties you reserve to work in. Packages sold. pk1-6-10, pk2- 11-16, pk317-25. Pk1=10%. pk2=13%, pk3=18% commission. Packages start at $3,500-52,000.

Servicing Florida Area for over 20 years. We are opening Texas, California, & New York. There is an unlimited line in categories. Tremendous opportunity for growth for Self-Starters with Press Release Passes.
Company ID: 107547 - Click Here for Full Details
Product Lines:
LED Drivers, LED Transformers, 
Target Markets:
OEM Manufacturers Offering Lighting Products, Lighting OEMs, Furniture Manufacturers, 
Sales Opportunity:
One the oldest LED driver Manufacturers in The US offering products into the landscape lighting, architecture lighting, horticulture lighting, outdoor lighting, Indoor Lighting, UL Listed with the best warranty in the industry
Company ID: 111117 - Click Here for Full Details
Product Lines:
An Industry Leading Manufacturer of Standard and Custom Engineered Controls, Motor Controls, and Power Distribution Equipment for Hazardous and Non-Hazardous Environments for North America and Beyond. 
Target Markets:
Selling Through and Supporting Electrical Distribution. Our Products Targets include Motor Control Centers, MCC Buckets, Retro Fit MCC Buckets, Drives and Soft Starters, Combo Starters, Custom Controls, Purge Systems, Switch Racks, Panel Boards, Hazardous Location Equipment. 
Sales Opportunity:
Our company is an Eaton, GE, ABB, Siemens, and Emerson Partner supporting this leading manufacturer of custom engineered quick ship partner. Working with engineering firms, OEMs, oil & gas, upstream to midstream, and downstream, chemical/petrochemical.
Company ID: 111092 - Click Here for Full Details
Product Lines:
Promote and Grow the Sales of Heavy Steel and Fabrications of OEM and/or Aftermarket Patented Parts and Proprietary Premium Alloy Steels, Field Services, and Engineered Fabricated Design, and Builds Within Multitude of Industries. 
Target Markets:
Coal Fired Power Utilities (Boiler, Maintenance, Fuel Yards) Hard Rock Mining; Gold, Silver, Copper, Iron Ore, etc., Open Pit, Underground, Process & Conveying, as well as Within the Cement, Asphalt, Pulp & Paper, and Sand Fracking Industries. 
Sales Opportunity:
Our company has over 50 Patented items, along with proprietary alloy steels, state of the art fabrication facilities and equipment, with over 150 employees. Our sales personnel are set up with dedicated territories and accounts with commissions up to 5% on every sale. We pride ourselves on a team approach to selling thru our direct technical sales support network each with a specific skill set and product knowledge.
Company ID: 111083 - Click Here for Full Details
Product Lines:
Grounding, Bonding, Static, Lightning, & Surge Protection Products. 
Target Markets:
Oil & Gas Industry. You will be Directly Selling to Operators, Salt Water Disposal Companies, Electrical Contractors, and Supply Houses. 
Sales Opportunity:
Our company is the industry leader that engineers systems that protect oil and gas field assets from damage caused by lightning strikes and static discharge. With our proven solution, operators will be protected from losses resulting in deferred oil and gas production, oil spill cleanup costs, EPA fines, and damage to corporate image.

We are an OEM and have patented products that being specked in with major operators and tank manufacturers. We've protected over 20,000+ facilities with zero incident. We are the largest provider in the Permian and Oklahoma shale plays. We do have customers in the North Dakota area that buy our products. With the Bakken coming back on-line there is a tremendous opportunity for growth. We have been in the business for over 20 years.
Company ID: 110900 - Click Here for Full Details
Product Lines:
A Line of Bacterial Products for Wastewater Treatment.

We Developed a New Strain of Archaea Bacteria for a Better Bioremediation Efficiency. 
Target Markets:
Wastewater Treatment Industry. Municipal, Industrial, Wastewater Treatment Plant Operators. 
Sales Opportunity:
If you want to contribute to change the face of this industry. Work with a Company and a product that will bring complete satisfaction to the customer. We support our reps with training, documentation and assistance. We offer a very interesting commission. Our bacterial products are developed with sound and efficient technologies. Our scientists and scientific studies back up our products.
Company ID: 110599 - Click Here for Full Details
Product Lines:
Energy Efficiency Innovator seeks HVAC Specialists and others with access to Commercial Buildings & other Large Facilities to Retrofit Small Motors, Fan Blades, etc.

Each Replaced Item Saves Electricity and Money. Savings 100% Quantifiable. Strong ROI. Reduces Monthly Utility Bills 20 - 25%. 
Target Markets:
Marketplace virtually unlimited:
Commercial Buildings
MUSH (Municipal, University, Schools & Hospitals), etc.

We call on:
Facilities Management
Sustainability Directors
Energy Managers
CFOs & Controllers
Engineering & HVAC People/Vendors 
Sales Opportunity:
Retrofitting small motors and fan blades is a concept that is sold just like an LED lighting retrofit.

Small motors and fan blades are a high-value target for reduced consumption and lower electricity bills. They spin constantly, and consume power that could just as easily be saved.

We have the name recognition, the track record and the voluminous research, product development, measurement, and verification, for prospective customers to know they can be confident in working with us. We meet the numbers offered up in proposals, because we've sweated the details and know our stuff. We have a team that generates the proposals, too.

We have the information, documentation, case studies, etc. to give our sales associates the data they need to close deals. We have an in-house Rebate Department that takes care of a) getting our offerings eligible on the utilities' rebate lists, and b) getting the customers their rebates as promised. Nothing beats a customer that's pleased to see you on a rebate list.

We are looking to put one person in each metropolitan area, and have about 35 cities in mind. (If you are an HVAC vendor or a well connected HVAC person, you may already have the potential customer part of the equation covered. I will work with you on a different equally lucrative direction.)

1099 contractor position. Straight commission plus bonus.
Company ID: 110783 - Click Here for Full Details
Product Lines:
We Design, Engineer, Fabricate, and in some cases, Install Commercial Roof Top Equipment Screens.

We Offer Framing, Panels, Louvers, and Sound Suppression Panels. 
Target Markets:
Our primary market is Architects. Architects immediately Grasp the Value of our Products and Services. We Provide Free Layout and Preliminary Engineering to Architects in Exchange - hopefully - for Inclusion in the Project Spec Book. 
Sales Opportunity:
Successful reps will have building enclosure design, architectural sheet metal, metal roofing and wall panel experience. Knowledge of the commercial roofing industry as it relates to the needs of architects will be of great value as well.

With project values ranging from $40K to $1M this can be a lucrative opportunity for an independent sales rep. We offer 1/3 compensation at the time of booking and 2/3 upon final customer payment.
Company ID: 110408 - Click Here for Full Details
Product Lines:
8' - 24' HVLS Fans.

A Unique System that Works in Conjunction with HVAC Systems that Helps Lower Upfront Tonnage and Helps Distribute the Cooler Air more Effectively and Efficiently. 
Target Markets:
Engineers, Architects, Electrical Contractors, Fork Lift Dealers, Loading Dock Reps, Mechanical Contractors, Developers. 
Sales Opportunity:
This is a great opportunity to promote a product that only this company has. This opportunity also allows you to work with the manufacturer and be on the only rep of your type selling these products. No need for worrying about 3 or 4 other companies selling the same brand as you. The products are unique, made in the USA, and can be used as the main staple of your product offering.
Company ID: 110392 - Click Here for Full Details
Product Lines:
Safety Training for Workers: Forklift Operator, Aerial Work Platform operator, MOL Approved Working at Heights, Confined Space Awareness.
Safety Consulting: Compliance Audits, Health & Safety Policy and Program Development, Job Hazard Analysis, Safe Operating Procedures, Safe Work Plans. 
Target Markets:
Construction Trades, Building Contractors, Manufacturers, Warehouse Operators. 
Sales Opportunity:
We are a small safety training and consulting company located in Burlington, Ontario. We are looking for an independent sales representative to sell safety training and consulting services to businesses in the Greater Toronto Area who operate under the Occupational Health & Safety Act and Construction or Industrial regulations.

As well as worker certification training courses such as MOL approved Working at Heights, Forklift operator and Aerial Work Platform operator, our focus is performing compliance audits that identify gaps in our client’s safety programs. Once identified, we help clients fill those gaps by assisting them develop written safety policies, programs and safe work procedures that help establish due diligence in the event of an incident.

We are a Ministry of Labour approved training provider for training workers how to work safely at heights in the construction sector. The deadline for workers to receive this training has been extended to October 1, 2017 and so this has created a window of opportunity for our company to be introduced to companies working under the construction regulations that require working at heights training for their workers as well as other training certifications.
Company ID: 110388 - Click Here for Full Details
Product Lines:
Stretch Ceiling Panels, and Stretch Ceiling Projects, Standard or Custom Size, Many Different Colors and Patterns.

Could be Lit by LED or Fluorescent Lights from Behind so the Light will go through Stretch Surface. Can have Custom Print on Stretch Surface and be Lit at the Same Time. 
Target Markets:
Architects, designers, contractors, engeneers. Directly to customers who may be interested in such a product. Business or Commercial. 
Sales Opportunity:
Representatives get commission on sales and we are looking forward to build long and mutually beneficial relationship. We produce a quality products that have a great potential. Our company aiming to work for and with customers for best result and complete customer satisfaction.
Company ID: 110264 - Click Here for Full Details
Product Lines:
All Stainless Steel Cooling Towers and Fluid Coolers for HVAC and Industrial Applications. High Quality CTI Certified, and very Competitive. 
Target Markets:
HVAC Contractors, HVAC Engineers, Industrial Contractors, Industrial Engineers, Power and Process Heat Transfer, CCHP. 
Sales Opportunity:
Our company is the western US region agent for a brand of Cooling Towers.
• Cooling Towers
• Fluid Coolers
• Evaporative Condensers

This is a high quality, CTI Certified product that will give you that long-awaited option to improve your customers competitiveness and your ability to close orders.
Company ID: 110168 - Click Here for Full Details
Product Lines:
Tension Rods, Tension Cables, Compression Struts, Custom Engineered Construction Components. 
Target Markets:
Steel Contractors, Steel Fabricators, Consulting Engineers, Architects, Facade Contractors, Construction Contractors, Architectural Construction. 
Sales Opportunity:
Our company manufactures and supplies tension rods, tension cables, and compression strut systems to the construction industry. The products and systems serve both a structural and architectural purpose, and are used in such applications as: roof trusses, canopies, bridges, façade support, tensile structures, stadia, and structural bracing. We are currently looking for North American representatives to raise the company profile in the US and widen our representation.
Company ID: 110162 - Click Here for Full Details
Product Lines:
Carbide Turning, Milling, Broaching, Polygon Milling, and from Tools. 
Target Markets:
General Engineering, Automotive, Medical, Aerospace, Gun Manufacturers, and Oil and Gas Component Manufacturers. 
Sales Opportunity:
Our company opened an office in New Jersey in January of 2016 and are currently looking for experienced cutting tool specialists to sell a very unique and broad range of niche products to the US market.
Company ID: 104141 - Click Here for Full Details
Product Lines:
Our company is a Specialized Door & Closure Manufacturer Located in Greensboro, NC with Operations in 18 Major Markets around the Globe.

We Manufacture Large Customized Folding, Sliding Folding, and Telescopic Type Doors & Closures. 
Target Markets:
Commercial A/E Professionals Responsible for Specification & Design Approval of Building Material Approval on New & Existing Commercial Construction Projects. We also Market Through Local Distribution Channels for Installation & Service Support. 
Sales Opportunity:
We are looking for local representation & provide full marketing support for delivery of our products to the local market through representatives such as yourself. Local rep will call on architects & support distributors through installation & services phases acting as primary point of contact in exclusive territories.
Company ID: 110120 - Click Here for Full Details
Product Lines:
- Any Type of Pipes
- Pumps
- Valves and Filters
- Boilers and Incinerators
- Tanks
- High Tech Equipment 
Target Markets:
- Industrial Factories
- Energy Companies
- Municipalities 
Sales Opportunity:
We have been working for the energy and construction sector by realizing turn-key projects in Turkey for 26 years. Our main aim is to be Turkish Representative of a manufacturer and sell their products to Turkish Market. Because of being an experienced company in our country, we can easily organize a new team and integrate the products and services to Turkish Market.
Company ID: 105089 - Click Here for Full Details
Product Lines:
Scrubbers, Blowers, Fans, FRP Fans, Tower Packing, Field Service, Incineration, Air Pollution Control Equipment. 
Target Markets:
Industrial, Chemical, Wastewater, Chemical Processing, Semiconductors. 
Sales Opportunity:
Our company delivers innovation that goes far beyond environmental regulation compliance. Environmental control is becoming a more important aspect of business because we only have one place to live, and we need to make sure that maintaining a clean environment is the highest priority. Every piece of equipment that we design, manufactures, installs, or maintains is oriented toward that goal.
Company ID: 109709 - Click Here for Full Details
Product Lines:
CNC Machined Components, Smart Drilling, CNC Turning, Prototyping, Calibration Sleeves, CNC Machining, 
Target Markets:
Custom Manufactures, Distributors, 
Sales Opportunity:
We are a very well established CNC parts manufacturer in India. We export our parts globally and we have large warehouse facility as well to stock customer items and ship to them in a need of urgency. We are pioneer in manufacturing of Calibration Sleeves. We also make parts according to Customer requirements.
Company ID: 109611 - Click Here for Full Details
Product Lines:
We Supply Superior Quality Special Purpose Machinery to the Plastics and Manufacturing Industries.

We Own Patents Pertaining to Several Innovative Products such as our Scanning System to Inspect Parts Prior to Processing, which Eliminates Scrap and Improves Overall Equipment Effectiveness. 
Target Markets:
The Increased Use of Plastic Materials in Modern Vehicles Provides an Ongoing Opportunity to Supply Automated Machinery to Manufacturers a Variety of Parts for Exterior, Interior, and Under-Hood Applications within the Automotive and other Industries. 
Sales Opportunity:
Today, more and more other industry segments, such as heavy duty trucks, farm equipment, boats, and recreational vehicles are converting many more components to plastics, offering additional opportunities for plastics welding and finishing machinery suppliers. Examples of equipment available from us are: two and three dimensional vision systems for part contour measurements and adaptive tooling, hot plate, infrared and ultrasonic welders and tooling (ultrasonic-horns), robotic assembly equipment, special-purpose drilling and machining systems.
Company ID: 109607 - Click Here for Full Details
Product Lines:
Surge Protection Device (SPD), or Surge Arrestor, Surge Suppressor, Magnetic Components, Transformers, Inductance Coil. 
Target Markets:
Wireless Telecommunication Equipment Vendors, Solar Power Industry, Electrical Power Industry, Petrochemical Industry, Railway Transportation Industry. 
Sales Opportunity:
No.1 manufacturer of SPDs in China. Products are UL and TüV Certified. Competitive pricing scheme. Current customer group includes: ERICSSON, SMA, EATON, NOKIA, HUAWEI. Free samples and literatures to reps. Engineering consulting and training at request. Fixed commission structure.
Company ID: 106845 - Click Here for Full Details
Product Lines:
Batteries, Custom Battery Packs, Battery Chargers. 
Target Markets:
Medical, Communication, Asset Tracking, Environmental, Industrial. 
Sales Opportunity:
Sell custom battery power solutions to the OEM customer for wireless, back-up and portable equipment. No consumer applications! Our company has more than 40 years experience in the battery assembly business working with all technologies such as, Li-Ion, Li-Polymer, Li-Iron phosphate, Lithium primary, nickel and lead battery chemistries, etc. Territories available are New England, Upstate NY, and Mid-Atlantic.

Battery packs have a long design cycle however, once the design has been completed and the business awarded, there's a long runway to keeping the business.

If you have had experience selling battery packs and are interested in getting back into it, we are looking to hire. If you are a rep that has experience selling value added products with a synergistic approach to selling, we are looking to hire. If you have strong customer relationships and a good knowledge of the territory, we are looking to hire. If you currently offer value added lines that have a strong synergy with power products like battery packs, we are looking to hire.

Please feel free to submit a sales inquiry to me with any interest and questions. Thank you for your interest.
Company ID: 109365 - Click Here for Full Details
Product Lines:
We are a Financial Services Company that Provides Manufacturers and Distribution Companies a Solution to Streamline their Payables Process and make Cash Rebates.

It Requires you to have Contacts at the CFO Level of any Company above $75M in Revenue. 
Target Markets:
Any Company with a lot of Vendors (200+) and Payments
Company Revenue should be Larger than $75M/year 
Sales Opportunity:
This is a Recurring sales model. As long as the customer is using our payment platform Commissions Never End. Commissions are paid monthly.

- Over 75% of all payments in the US are still made by check.
- Your customers are no exception.
- Our solution converts them to 75% ELectronic.
- It provides a New Revenue stream for your customer by giving them a rebate on electronic payments via the MasterCard network.
- Typical customer increases Cash by $250K/year (to the bottom line).

With over 30 years in the payments business, we provide training and the ability for you to produce in 60 days.
Company ID: 108328 - Click Here for Full Details
Product Lines:
Mixers/Agitators for Fluid Mixing.

The Next Generation Mixing Technology HPCDI with Significant Competitive Advantages over any other products on the market. An Easy Sell. This New Technology was Developed to Solve Difficult Mixing Challenges and Problems. Proudly Canadian Made. 
Target Markets:
Consulting Engineers, Industrial Production or Operation such as Water/Wastewater Treatment Plants, Chemical Industry, Mining, Pulp and Paper, Oil and Gas, Food Processing. 
Sales Opportunity:
Tired of apple-to-apple bidding? You need a watermelon. This Patent Pending product has been accepted by end-users quickly because of its superior performance such as mixing efficiency, energy efficiency, minimum maintenance and short payback, which have been evidenced by the installations.

These products present an exciting opportunity for the motivated sales representative with knowledge of the mixing or pumping. Preferred candidate company already have solid relationship with consulting engineers and the industries. If you think that you have the experience, sales skills, an excellent track record, and are motivated to success with your hard work and effort, then you are the company/person we are looking for to take our current sales to the next level.



Canandaigua Chamber of Commerce


© 2018