Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Filtration & Purification\Heating / Cooling / Venting Equipment
Click on Company ID to View Full Details
Company ID: 113751 - Click Here for Full Details
Product Lines:
Our Product is a Fan Coil Unit Integrated with Heat or Energy Recovery Ventilator in One Single Indoor Piece.

This Indoor Fan Coil shall be a Connected to an Outdoor Air Cooled Condenser or Heat Pump Unit or to Water Cooled System (Heating or Cooling). 
 
Target Markets:
These Products are a Good Fit for Residential and Light Commercial Applications such as: New Homes, Schools, Green Buildings, High Rise Buildings. 
 
Sales Opportunity:
I believe this is a good opportunity for an agent to sell for these reasons:

1- New, reliable,High efficient and green technology for new buildings and homes.
2- Custom type design which can accommodate different applications and fit different needs depend on customers.
3- price is not expensive compared to low cost low quality fan coil products (only about 5% higher than standard products) and payback is quick for end-user.
4- Nowadays, a lot of end-user are seeking a high efficient and robust equipment.
5- Control is very smart to maintain a high level of comfort and optimization of energy for your building.
6- All in one single piece (heating,cooling and ventilation).
7- One controller will do all of that.
8- No balancing required when you connect a traditional fan coil with a new HRV/ERV unit.
9- Very high efficient at part load operation due to the fact of using fully variable speed fans and compressors.
10- I am the engineer and owner for this company with over 12 years of experience in HVAC industry and I know that this product will find its marketshare with the right partner/agent in each of the US states.
11- For heat pump applications, we are offering, air to water, water to air, water to water, and air to air heat pumps. This heat pump is suitable for a cold climate region as well as it can operate down to 100% heating capacity at 7F for COP = 2.
 
Company ID: 113503 - Click Here for Full Details
Product Lines:
We are a US Manufacturer of Industrial Liquid Chillers.

Coolers are Available for Closed- Loop, Open Loop, In-Line, Drop-In-Tank Applications and Process Tank Models All Specifically Designed to Cool Water-Based Coolants, Light Oil, Synthetic Coolants along with many others. 
 
Target Markets:
Industrial Applications include:
Machine Tool Companies
OEMs
Filtration Companies
Spindle Manufacturers
Chip Conveyor Systems
Food and Beverage Processing, Wineries, Breweries, Pasteurization, Homogenization
Plastic Processing
Tank and Pump Applications
Plus many more! 
 
Sales Opportunity:
Since 1989 we have been manufacturing our chillers in New Hampshire to meet and exceed many of the requirements set forth by the industries we serve. Not only would you be selling an exceptional product made in the USA, the quality and workmanship is outstanding. Our internal support staff is always there to assist you with any questions you my have. Commission is competitive.
 
Company ID: 109083 - Click Here for Full Details
Product Lines:
We Manufacture a Premium, 100% Recycled Rubber Rooftop Pipe, Conduit, Duct, Solar Support that Spans Many Industries.

We have 5 SKUs that Consist of 85% of the Business but we also do many Custom Assemblies for Govenrnment and Private Industries alike. 
 
Target Markets:
1) Electrical/Mechanical Contractors Direct
2) HVAC Direct
3) Solar Contractors Direct
4) Sheet Metal Direct
5) Roofing Wholesale or Direct 
 
Sales Opportunity:
We recently purchased a 30,000 sq. ft. facility and as such have increased our manufacturing capacity nearly 4X. As a result, we now have the inventory to support Sales Reps in new territories and markets previously ignored. We are the low cost producer of this type of support in the world. Even China can't compete with us.

We have 5 North American warehouses with plans to buy 2 more by the end of 2017. What this means, is you'll have access to the right product, at the right price, with industry low lead times. This is an estimated $190 million per year industry and growing 10-15% per year as wood is being written out of the building code in most states.
 
Company ID: 113554 - Click Here for Full Details
Product Lines:
Booster Coils, Intercoolers, Direct Expansion Refrigeration Coils, Ammonia Coils, Steam Coils, Water Coils, Brine Coils, Glycol/Propylene Coils, Hot Oil Coils. Stainless Steel, Carbon Steel, Cupro Nickel, Copper, Aluminum. 
 
Target Markets:
Steel Mills, Pulp and Paper, Chemical, Power Generation, Food Processing, Pharmaceutical. 
 
Sales Opportunity:
We have been in business for over 60 years! With our wealth of knowledge and fast response time we would be an invaluable manufacturing partner. We have a defined Manufacturer's Rep Program including matching co-marketing funds available, Rebates, Sales Promotions, technical support, training, flexible commission structure and exclusive territories. We greatly value loyalty and transparency when partnering with rep firms, so we offer exclusive agreements which ensures that we're not selling around you, and vice-versa.
 
Company ID: 8239 - Click Here for Full Details
Product Lines:
We Provide a "Feeless" Franchise Type Opportunity marketing a Unique Cash Flow Improvement Service that our Clients Use to Increase their Cash Flow, Reduce Billing Costs, Lower Days Receivables, Eliminate Collection Agency Costs, Reduce Overhead Related to Receivable While Reducing Office Stress. 
 
Target Markets:
Our Service is Needed by Over 90% of Businesses in Over 80 Different Industries including Professional, Commercial, Wholesale, Retail, Service, and the Multi-Billion Dollar Healthcare Industry including Medical and Dental Services. Professional Business Associations are also clients. 
 
Sales Opportunity:
Use your B2B sales and/or business consulting experience to earn a six-figure residual income marketing our distinctive service. Seeking individuals with B2B sales and/or consulting experience with a business mentality and excellent communication skills to call on company owners, presidents, and chief financial officers and offer our unique cash flow improving business service.

- Proven, needed business service
- Stable company
- Unlimited six-figure income potential
- Initial and two ongoing residual earnings
- High referral sales factor
- No territory restrictions
- Protected accounts
- Recession proof industry
- Company backup and support
- Professional customer service and support for clients
- Excellent Initial and ongoing training and support
- Unlimited prospect base
- No nights, travel or week-ends
- Hassle free transactions - no turn-downs, qualifying, or credit checks
 
Company ID: 108293 - Click Here for Full Details
Product Lines:
Custom Manufacturer of Industrial Curtains including Plastic Strip Doors, Curtain Walls, Airport Baggage Handling Conveyor Curtains, Clean Room Curtains, Laser Barriers, and Data Center Hot Aisle/Cold Aisle Containment Systems. 
 
Target Markets:
We provide Industrial Curtains to a range of Industries including Aerospace, Airport, Automotive, Biotech, Clean Room, Cold Storage, Data Centers, Electronics, Medical Device, Pharmaceutical, & others. Sales are Made to End-Users, Contractors, OEMs, and Resellers such as Material Handling Companies. 
 
Sales Opportunity:
Our company takes pride in fabricating custom products to fit the specific needs of each and every application presented to us. The product is delivered in a timely fashion at a reasonable price. Using UPS as our standard carrier, all orders are received no more than five days after they are shipped, at a low negotiated price.

In business since 1978, we use materials of the highest quality and can provide test data in regards to anti static properties and flame spread capabilities for all of our flexible vinyl materials. Our company supports its representatives by maintaining an up to date web and social media presence which along with our participation in trade shows provides qualified leads. Our commission structure of 10% to 25%, based upon product and customer type, affords manufacturer reps a great earning the opportunity.
 
Company ID: 111192 - Click Here for Full Details
Product Lines:
HVAC & Plumbing Products, Dirt Separators, Pressure Reducing Valves, Radiant Heating Solutions, Balancing Valves, Filters, Thermostatic Mixing Valves, OEM Parts. 
 
Target Markets:
Dealers, Distributors, Manufacturers, Construction. 
 
Sales Opportunity:
Our company is a Multi-Million dollar Italian Manufacturing firm specializing in the HVAC and Building markets founded in 1953. Production is concentrated in Italy out of three manufacturing sites and consists of more than 4,000 products. Being already among the leading suppliers in the European market, our parent company has opened its US division, located in California, to begin to cultivate the USA market.
 
Company ID: 113041 - Click Here for Full Details
Product Lines:
Ductless Mini-Splits: Single Zone, Multi-Zone, Light Commercial.

A Complete Line going From 15SEER to 38SEER, Cooling, and Heat Pumps. VRF and Mini VRF: Heat Pump, Heat Recovery, Ultra Heat. Unitary Products. 
 
Target Markets:
We would like to Develop a Relationship with Wholesalers and/or Large Contractors. 
 
Sales Opportunity:
Our mission is to provide the greatest value through dependable equipment, sterling support and honest pricing. We have developed and recruited a seasoned local sales force and an experienced tech support team. We have one of the most innovative extended warranty program for the distributors, the contractors and the equipment owners. We have created the necessary tools and infrastructure to support/train and develop Willis HVAC into a Premium brand in North America.
 
Company ID: 112318 - Click Here for Full Details
Product Lines:
Control Automation Group (CAG) Designs, Builds, and Installs Custom Automated Test, and Assembly Systems for the Manufacturing Industry.

Currently most of our Customer Base is in the Northeast with Installations Throughout USA and Mexico. I am Looking to Expand our Sales Base Across the USA. 
 
Target Markets:
We Currently Build, Semi and Fully Automated Systems to Mostly Automotive and Medical Suppliers but are not limited to any Manufacturing Sector. We are Open to any Manufacturer that is Looking to Improve Quality while Lowering Labor Costs. 
 
Sales Opportunity:
CAG is independently owned and was founded in 2004. Sales for the past three years has been between $5-6.5M. Sales commissions are paid on a percentage of sales price.
 
Company ID: 112279 - Click Here for Full Details
Product Lines:
- Biological Safety Cabinets (Class I, II, III)
- Isolators
- Fume Hoods
- Powder Handling Equipment
- Climatic Control Systems
- Clean Environments
- Powder Handling Equipment
- Flexible/ Disposable Containment
- Fixed and Modular Lab Furniture
- Lab Automation Enclosures 
 
Target Markets:
Pharmaceutical
Biotech
Biomedical
University
Hospital
Compounding Pharmacies 
 
Sales Opportunity:
Our company is headquartered in Oxford, MA was founded to fill the need for a single supplier of a wide range of exposure control technologies. Ours is a value-added distributor and manufacturer of best-in-class solutions. Offering CE, FDA, LEED, OSHA, NIOSH, and USP 800 compliant exposure control equipment.

Some of the industries we work with are: Pharmaceutical, Biotech, Biomedical, Healthcare, and University industries. This, combined with many years of experience, superior customer service, and local coverage across the entire U.S. - we are able to offer nothing less than just the right solution!

In addition to quality products and systems, we also offers services including installation, user training, preventive maintenance, validation and qualification documentation, and Factory and Site Acceptance Tests (FAT/SAT). Rather than squeezing an application into a certain "style" or "type" solution, we will offer the right equipment for the application that fits the needs, desires, and budget best!
 
Company ID: 109994 - Click Here for Full Details
Product Lines:
1. VRF Up to 64 Zones, Heat Pump Heats Down to -22F Ambient, the Lowest in the Industry, Heat Recovery, Solar PV Assisted.
2. DC Inverter Heat Pump 1-9 Zones
3. PTAC/PTHP (42x16") 208-230/1/60 and 265-277/1/60 AC or HP+ Electric Heater 07/09/12/15K, Replacing Major Brands on the Market. 
 
Target Markets:
1. HVAC/Mechanical Distributors and Contractors (if no distributor)
2. HVAC/Mechanical Design/Specifying Engineers/Consultants
3. Property Owners, Builders, and General Contractors
4. Hotels Owners, Hotel Management Groups and Hotel Builders
5. Corporate Purchasing
6. Government Purchasing 
 
Sales Opportunity:
HVAC & R Representatives in all States of US and all Provinces of Canada (Huge Opportunities).

* Engineered products of great features and high qualities
* Staffed engineers of broad knowledge, experience for best support and customer service
* You sell to good customers, we do the rest.

All electric heat pump heating down to the lowest in the industry -22F allowing to replace traditional "AC+Gas Furnace" in all applications.
1. Mini-split for residential and light commercial projects;
2. VRF for residential, commercial, institutional and hospitality projects, small and big;
3. PTAC mainly for hotel/hospitality industry.

Similar or even better product features and qualities to those brands in the 1st tier:
a. Mini-split and VRF - Mitisubishi, Daikin, LG, Fujitsu, and Samsung.
B. PTAC-Amana/GE but at much better pricing and service.
 
Company ID: 111561 - Click Here for Full Details
Product Lines:
Line of High-Temperature Technical Ceramic Coatings. ITC Coatings increase energy savings, protect against corrosion and wear, reduce emissions, and increase the life of equipment and refractory. Applied to metals, castables, gunnables, brick and fiber insulation. 
 
Target Markets:
Manufacturers of Steel, Aluminum and Non-ferrous, Power, Waste-to-Energy, Petrochemical, Hydrocarbon Processing, Cement, Lime, Gypsum, Pulp & Paper, Incinerators, Brick, Porcelain and Tile, Foundries and Heat Treaters. 
 
Sales Opportunity:
We are a small, growing business with amazingly effective products looking for individuals with industry experience and we are offering commission-based, incentivized, regional sales opportunities in the US. Multiple regions available. Exclusivity negotiable. No house accounts. Full training and support.
 
Company ID: 110630 - Click Here for Full Details
Product Lines:
Titan® Electronic Tankless Water Heaters. 
 
Target Markets:
Plumbing Supply, Contractors, Engineers, Architects, Builders, Retail Hardware Stores (Ave, True Value, Lowes, Ferguson). 
 
Sales Opportunity:
Looking for sales representatives to take on our line of tankless water heaters. We have been in business for over 32 years manufacturing in the USA. Patented design and advanced engineering go into our digital tankless water heaters. We also offer custom designs if needed for customers.
 
Company ID: 107770 - Click Here for Full Details
Product Lines:
Market Financial Services Ranging from $5K-$50 Million+.

Our company Finances most all Industries. A, B, C, and High Credit Risk Clients. We Finance everything from Commercial Real Estate to Equipment Leasing, Start-Up, BK and more. Multiple Loan Programs. Website, Training, Support. 
 
Target Markets:
Commercial Loans, Equipment Vendors & Suppliers, Yellow Iron, Trucking, Air, & Sea, Farming Equipment, Church Financing, Oil & Utilities, Fix & Flip, Fleet Financing, Equipment Financing, Commercial Real Estate, Government Financing, Medical, Start-Up, BK and more. All Markets Need Financing. 
 
Sales Opportunity:
This is a ground floor opportunity to build a dream business and experience financial freedom. Agents can earn in excess of $100K on one deal with no cap. $1 million dollar loan with 5 points will earn the Agent 30k in commissions. Agents also earn monthly residual on AR financing, B2b & B2C financing. Up to 50% + comm.

Agents earn override by building a team if choose too. Top agents can earn in access of $500,000 annually with no ceiling. Part-time or full time. Certain loans agent can earn 50%+ commission. Our lenders fund up to $500 mil +. We have a loan to offer every industry. We have 10% down loans, BK okay, Start-Up Okay, Easy Qualify + more

There is a one time $0 - $4,995 agent fee and $44.98 monthly hosting for your agent websites if needed or $0 for qualified brokers.. We are accepting agents and Brokers across the U.S. This is an opportunity that will give you a chance to earn high six figures with a service in demand that need no selling. Finance sells itself or finance your clients or use financing to generate more business and or close ore business.

We offer great rates and terms with easy approval and minimum docs with a fast turn around. This is a high demand business with plenty of prospects. Clients need your service and are looking for you. Contact us and start making money as our Independent Agent or Broker. Cost $0 - $4,995.
 
Company ID: 95148 - Click Here for Full Details
Product Lines:
We have two opportunities!
1. Manufacturers Representatives Wanted for MR COOL
Innovative, Efficient Heating, and Cooling Products Designed for a Modern Lifestyle.

2. Manufacturers Representatives Wanted for FlippinToad. Sell cool, fun, innovative phone cases! 
 
Target Markets:
1. MR COOL: HVAC Contractors, Industry Distributors, and Direct to Consumers.
2. FlippinToad: Phone Case Retailers, Distributors and Direct to Consumers. 
 
Sales Opportunity:
1. MR COOL - Great commission structure. We offer great price, warranty, product support. Marketing and branding will help products popularity. We will also drop ship direct to customers. For more info and sign up visit MRCOOL official site.

2. FlippinToad - Make good money for yourself being a FlippinAffiliate. Earn $10 on every phone case you sell. Base Marketing assets provided.
 
Company ID: 108721 - Click Here for Full Details
Product Lines:
Variable Frequency Drives. 
 
Target Markets:
Manufacturing, Industrial Contractors, Water/Wastewater, OEMs, HVAC, Material Handling, etc. Virtually anyplace in Industry AC Motors are Utilized. 
 
Sales Opportunity:
The RPM line of AC drives is an extremely versatile and reliable offering. It offers several distinct advantages over the competition. The RPM Controls’ drive features state of the art technology and power circuitry designed around efficient, latest generation IGBTs. This means less heat loss and higher reliability.

Instead of random spot checks, every drive is tested at 100% load before it leaves the factory. Precise vector control algorithms yield outstanding performance on even the most demanding loads. They are configured to be exceptionally intuitive and easy to program during commissioning.

While maintaining advanced feature capability for complex applications, the most common parameters are linked together in a subgroup to enable fast and efficient installations for most basic applications.Their western design addresses issues important for success in the North American market. Southern California based support helps insure prompt resolution of any technical issues.
 
Company ID: 107027 - Click Here for Full Details
Product Lines:
Metal Fabrication, AWS Certified Weldments, Assemblies, CNC Machining, and Painting in Mild Steel, Stainless Steel, and Aluminum.

Our Core Business includes Small or Large, Simple or Complex Weldments, Enclosures, Electrical Boxes, Tanks, HVAC Assemblies for the Mass Transit Industry. 
 
Target Markets:
Mass Transit, Healthcare, Fast Food, Minor Capital Equipment, Food Service, HVAC, Energy, Material Handling, Pharmaceutical Industries, etc. 
 
Sales Opportunity:
We have been in business since 1974 and our clientele consists of major domestic and international customers. Our core business is metal fabrication with the capability of complete turnkey electromechanical assemblies.

Our weld certifications are: AWS D9.1, D1.1, D1.2, D1.3, D1.6, and AWS D17.2 (MIL-W-6858).

The manufacturing capabilities consist of:
- CNC Lasers
- CNC Turrets Punch Presses
- Press Brakes
- CNC Machining
- MIG/TIG Welding AWS CERTIFIED
- Spot Welders AWS D17.2 / MIL-W-6858
- Painting
- Stroke Sanding
- Assembly Area
- Kitting
 
Company ID: 94366 - Click Here for Full Details
Product Lines:
HVAC, Mini-Split Air Conditioners, Ventilation, Flooring, Decking, Bathroom Cabinets, Hardwood Flooring, Tile, Heat Recovery Systems, Moldings, Bathtubs, Shower Panels, Cork Flooring, Matting, Decking, Exotic Woods, Ipe Decking, Aluminium Profiles. 
 
Target Markets:
CANADA, USA: Stores, Builders, Contractors, Architects. 
 
Sales Opportunity:
We are 20 years old importer wholesaler of HVAC , building materials , bath ware and flooring. We are looking for manufacturer representative. We have two showrooms, Montreal and Toronto and two warehouses. Our products are mainly imported from Asia and we have plenty of inventory. Sales could be done over the phone and by emails.
good commission,

Aggressive Price
Easy to SELL
Plenty of Inventory
 
Company ID: 105064 - Click Here for Full Details
Product Lines:
DewPoint RH% Analyzers, Transmitters, & Probes Compressed Air/Dryer Alarm Systems, Trace Moisture Analyzers, Atmospheric Condition Hygrometers, Precision Humidity Chambers, Engine Test Cell Hygrometers, Chilled Mirror, and Polymer Sensors.

For sale or rent. Made in USA. 
 
Target Markets:
Industrial, Pharmaceutical, Medical, and Metrology Industries, Users of Dry Air/Gases, Private/Government Laboratories, Users of High Precision Moisture Analyzers, Calibration Laboratories, Field Calibration Service Providers, Compressor Manufacturers, Gas Dryer Manufacturers, End-Users, and OEMs. 
 
Sales Opportunity:
A global leader in the design and manufacture of chilled mirror hygrometers and other moisture measurement and calibration devices. The company is seeking aggressive manufacturers representatives in Alabama, Alaska, Arizona, Arkansas, northern California, Colorado, Florida, Georgia, Louisiana, Maryland, Missouri, New Mexico, Minnesota, Mississippi, Montana, New Jersey, Oklahoma, Oregon, Eastern Pennsylvania, South Dakota, Texas, Utah, Virginia, Washington, and Wyoming wishing to add a domestically manufactured and supported, premium analyzer line to their portfolio. Also seeking representation in South and Central Americas.
 
Company ID: 56130 - Click Here for Full Details
Product Lines:
Integrated Web-Based Cloud ERP Software, Customer Management CRM Software, B2B eCommerce, Customer HelpDesk, and Sales Automation software.

Integrates and Automates Lead/Customer Management, Sales Process, Purchases, Inventory, Warehousing, Shipping, Manufacturing, eMail, and Sales Processing. 
 
Target Markets:
Small to medium sized companies (10 to 500 employees, 1M to 500M sales) in the Manufacturing, Distribution, Importing/Exporting, Sales and Service Industries. Due to web based architecture, great for multi-office, global, and franchise companies. 
 
Sales Opportunity:
This is a great sales opportunity for experienced software sales reps, business consultants, or value added resellers (VARs). Even your own company may need this type of software solution. The competitive advantage is our pricing, service and flexibility because you are working with an agile software company. The potential customer base is large because the system can be sold to many vertical industries, customized and integrated with existing software systems.

We pay both upfront and recurring commissions that generates a continuous revenue stream for you. In addition, if you desire, you can earn professional fees by helping implementing the application to your customer.

Unlike other business software, BCA owns the source code and this can be fully customized and integrated with any existing software or database systems.
 
Company ID: 51211 - Click Here for Full Details
Product Lines:
• Selling to industries or accounts that use wide format 24” – 120” CAD or Graphic printers manufactured by HP, OCE, Ricoh, Mimaki, Seiko, Canon, Xerox.
sales of supplies and equipment such media, toners, or cartridges. 
 
Target Markets:
Archtitects, GIS mapping companies, Engineering firms, Utility companies, federal, state, county, city govts, Sign & Banner shops, universities and colleges, contruction and surveying companies, plus over 80 other industries that do design and printing.

All areas open except Colorado. 
 
Sales Opportunity:
• Are you looking for additional revenue opportunities
• Selling to industries or accounts that use wide format 24” – 120” CAD or Graphic printers manufactured by HP, OCE, Ricoh, Mimaki, Seiko, Canon, Xerox.
• Would like additional income resulting from the sale of supplies and equipment such media, toners, or cartridges.

Our independent representatives enjoy:
• An exclusive geographical territory
• Email, telemarketing, and personal visit campaigns to close more business for you and us.
• Ongoing income from all accounts that order supplies and equipment within the assigned territory
• Working with a knowledgeable and experienced sales force that can help you develop a better revenue stream than you currently enjoy and provide your customers with unsurpassed customer service
• Over 10,000 products we can offer your customers
If you are interested, please contact me via email at your earliest convenience.
 
Company ID: 52315 - Click Here for Full Details
Product Lines:
We are a New Broadcasting Company Offering Churches, Schools, Entertainment Venues, Auctions, Horse Clinicians, Funeral Homes.

Anyone Wanting their Own Channel on BRN Network Both Live Broadcast and Place Videos for People to Watch. 
 
Target Markets:
Churches, Especially Cowboy Churches, Schools, Nightclubs, Entertainment Promoters, Entertainers, Bands, Funeral Homes, & Photographers that do Weddings. 
 
Sales Opportunity:
Lots of potential clients nation wide, easy sale. A channel cost the provider a one time cost of $500. Rep get 50% of that $500 plus 20% of all network viewer revenues is pooled and divided among all sales reps so you can build a good residual income Great for full time or part time rep & especially reps already calling on target markets.
 
Company ID: 112105 - Click Here for Full Details
Product Lines:
We are a Job Shop Specializing in Precision Sheet Metal Fabrication for Food Service Products, Telecommunications, Computers, Gaming, Electronics, Banking and Medical Industries.

We Fabricate Anything from Small Flat Parts to Large Complex Assemblies. Located 20 miles outside of Chicago, IL. 
 
Target Markets:
Banking
Computers
Electronics
Food Service
Gaming
Industrial
Machinery
Medical
Military
Railways and Trains
Telecommunications
And any other market that requires sheet metal parts. 
 
Sales Opportunity:
We offer 10% commission. Established in 1967 our company has Developed into a Proven Leader in the Sheet Metal Fabrication Community. The most modern and high-tech systems and equipment are utilized, with a facility large enough to support and process our customers finishing, assembly, and JIT programs.

• Metal Fabrication Capabilities: Small Components, Large Components, Assemblies.
• Fabrication Method: Laser Cutting, CNC Punching, Forming, Polishing, Welding, Hardware Insertion, Assembly, Finishing.
• Materials: Aluminum, Cold Rolled Steel, Galvanized Steel, Hot Rolled Steel, Stainless Steel.
• Raw Material Forms: Sheet, Plate, Bar Stock, Tubing.
• Material Thickness: Min .020" to Max .5", Maximum Length: 120", Tolerance (+/-): ±.003".
• Additional Services Provided: Assembly, Painting, Plating, Silk-Screen, Storage.
• Production Volume: High Volume, Low Volume, Medium Run, Prototype, Short Run.
• Lead Times: 3 - 5 weeks, Lead Times for Quote: 24 hours.

We invite any sales reps that have experience in this industry and are confident they can help us expand our customer base.
 
Company ID: 113290 - Click Here for Full Details
Product Lines:
Silicone OEM Components: Keypads, Sealing, Gasket, Tubing, etc. 
 
Target Markets:
Medical, Aviation, Aerospace, Military, Electronic Devices, EMS, etc. 
 
Sales Opportunity:
We are looking for an experienced rep in mechanical components, especially in Medical, aerospace, or aviation. Anyone with the qualification, please feel free to submit a sales inquiry to us soon.
 
Company ID: 113390 - Click Here for Full Details
Product Lines:
Anemometers, Duct Air Leakage Testers, Flow Hoods, IAQ Monitors Particle Counters. 
 
Target Markets:
HVAC, Cleanroom, Industrial Flow Testing. 
 
Sales Opportunity:
Our company has delivered the best measurement solutions with its products and services that adapt precision measurement technology for fluids and particles. We are contributing to technological innovation and quality improvements for the processes of quality and environment management.

Sustaining human well-being in the areas of environment, health and energy have always been a primary focus of our company. We develop leading technology with the goal of maintaining health and safety in industries including automobile, aerospace, semiconductor, electronics manufacturing, heavy industry, steel, shipbuilding, pharmaceutical, biotechnology, food processing, medical, construction and civil engineering.
 
Company ID: 113367 - Click Here for Full Details
Product Lines:
Expansion Joints Used at Power Plants, Paper Mills, Steel Mills, Oil & Gas, Processing, and other industries.
Rubber
Metal
Fabric
Bellows
Related Field Services (Remove, Repair, Replace)
Upgrading of Original Expansion Joints 
 
Target Markets:
Power Plants
Steel Mills
Paper Mills
Chemical Plants
Process Plants (Glass, Food, others) 
 
Sales Opportunity:
Where the OEM & competitors are happy to give a year and a day warranties, we manufacture joints to provide solutions, stand up to their harsh environment and last much longer. We manufacture in-kind and upgraded joints out of our factories in North Carolina & Germany as well as provide the related field services.
 
Company ID: 113273 - Click Here for Full Details
Product Lines:
Wall mounted exterior and interior Heat Pumps, like BARD or MARVIAR. Top of the line with VRF high end and single stage for low-end units. Many different ventilation options. 
 
Target Markets:
Distributors North America 
 
Sales Opportunity:
This is a start-up of an International Company presently building AC units for the telecommunications industry worldwide. Excellent opportunity for an aggressive Rep Agency. Be part of a ground-up division.
 
Company ID: 113167 - Click Here for Full Details
Product Lines:
An Innovative, Beautifully Designed Solar Energy System that Through Dual Axis Tracking Follows the Sun All Day for Maximum Energy Production, Cost Savings, and Environmental Benefits.

Our Company Produces up to 40% More Electricity than a Comparably Sized Rooftop Solar System. 
 
Target Markets:
Business, Government, Institutional, and Residential Markets. 
 
Sales Opportunity:
The electricity market is one of the largest markets in the world. Globally, solar energy is the fastest growing energy source. Our sales agents will be representing a unique product that has the potential of producing significant income and important social benefits. Our sales agents will be participating in the transition away from polluting central power plants to providing their customers with a desirable, renewable energy solution. This is the newest division of a company that has been innovating in the energy market for over 40 years.
 
Company ID: 113131 - Click Here for Full Details
Product Lines:
Smart Ventilation to Control Moisture Control, Indoor Air.

It Reduces Mold, Odors, Dampness, Radon, CO, IAQ - for a Healthy Green Home. Electronic Descaler Eliminates Limescale Problems- Corrosion, Warranties for Appliances, Fixtures, & Plumbing. Save Energy & Water. Easy, Computerized. 
 
Target Markets:
1. Contractors, Builders, and Showrooms open to the Trades/Homeowners.
2. Property Managers for Multi-Family Housing in Private and Public Sector.
3. Service Companies for Residential Plumbing and HVAC. 
 
Sales Opportunity:
Our company is in the forefront with advanced solutions for everyday air and water quality issues. Our goal is to enhance your profitability with an easy sales process by proving proprietary and patented high quality products to your existing customers and open doors to new prospects.

There is an exploding demand for a healthier and drier home environment as a result of the tightening of home construction. Solving resultant issues of excess mold, odors, condensation, and IAQ has become a priority. Our technology is unique and has provided proactive and remedial solutions for 20 years to builders, property management in public and private sectors and to numerous trades and services. Provide easy sensible affordable solutions in basements, crawl spaces, and apartments.

Our electronic smart descaler provides an easy effective solution for limescale buildup that is unlike any other market. It is a non-magnetic technology and is totally green and effective. It will enhance the energy efficiencies of all water appliances, plumbing and fixtures. The trades will benefit in reducing warranty issues, repairs, and early replacement of equipment.

The market demand is strong and broad, the technology is easily integrated affordable and guaranteed. We support you the representative, as well as your clientele, with all the materials for success and easy integration.
 
Company ID: 113158 - Click Here for Full Details
Product Lines:
Lubrication Pumps, Centrifugal Pumps, and Submersible Pumps. 
 
Target Markets:
Contractors and Companies. 
 
Sales Opportunity:
We design and construct automated controls systems/panels that require pre-lubrication and lubrication pumps. Or could be used for centrifugal, submersible pumps meant for oil and gas companies and contracting firms.
 
Company ID: 113009 - Click Here for Full Details
Product Lines:
Heat Pumps & Accessories 
 
Target Markets:
Hardware Store. 
 
Sales Opportunity:
A Mini-split heat pump company based in New Brunswick, Canada is seeking representation throughout Canada and Eastern United States. No capital is required, we will invoice the client directly. Our company provides a generous commission and residue income to qualified representatives. We pay commissions bi-weekly for paid invoices.

Prospects should have a solid track record and experience dealing with Hardware stores. Submit your profile to set up a phone call to obtain further information.
 
Company ID: 112965 - Click Here for Full Details
Product Lines:
Our XCPC Collector is Capable of Reaching Temperatures of Up to 400F which is a Perfect Fit for Commercial and Industrial Applications.

Paybacks are Proving to be Between 1-8 Years and the Technology is the Lowest Cost of Solar Energy. 
 
Target Markets:
Commercial and industrial customers: Food/Beverage Industry, Agricultural, Oil & Gas, Distillery, Hospitals, and/or Education. Our Applications include A/C - Refrigeration, Dehumidification, Process Heat/Steam, Desalination, or Water Pasteurization. 
 
Sales Opportunity:
The holy grail of solar thermal has always been to be able to produce air conditioning with Sun. It is now possible to! Our technology is the greatest advancement in solar thermal in over 100 years and we need you to help us get the word out. If your client is looking for sustainability solutions, lowering green house gas emissions, and lowering energy costs, then we may have the answer.

You will not need to redesign existing systems, but rather our product will just inject heat to reduce fossil fuel consumption. You don't need to be an expert in solar, we will provide you the support you need. Bring us the customers and you get paid on completed jobs. Projects range is size from 35 collectors to 10,000 and you get paid per collector sold. Submit a sales inquiry for more info today.
 
Company ID: 112924 - Click Here for Full Details
Product Lines:
We Manufacture more than 2,000 SKUs for the Electrical, Plumbing, and Industrial Segments.

We Provide Casting, Machining, Stamping Operations for Diversified Alloys in Copper, Zinc, Aluminum, Steel, and are now Investing in Iron. UL & ISO 9001 Certified. 
 
Target Markets:
Large and Small Public and Private Companies in the Electrical, Industrial, Plumbing, Oil & Gas, Power Generation/Energy, and some Automotive Applications. 
 
Sales Opportunity:
We are looking for experienced sales reps that can bring in a diverse customer base in the industry sectors mentioned above. Our organization is a flat organization and you will be dealing with me and one other individual in the Company. We are looking to grow revenues of this Company by an incremental $5M to $10M within 12 months and be at that pace for the next 3 years.

The Company has a history of 30+ years as a reputed supplier for a lot of recognized names in the electrical, plumbing and industrial sectors and we would like to leverage this rich history and demonstrated success to take the Company to its next stage of growth.
 
Company ID: 70656 - Click Here for Full Details
Product Lines:
Industrial Centrifuges and Filters.

We are a Chinese Chemical Processing Equipment Manufacturing Company. Specializing in Separation Machinery, including Centrifuges and Filters. The company headquarters is based in Shanghai, China. 
 
Target Markets:
Fine & Bulk Chemicals, Pharmaceuticals, Sugar Refining, Food, and Agricultural Industrial. 
 
Sales Opportunity:
We are now seeking commission-based sales agents with experience at selling industrial equipment. Our main products are Industrial Centrifuges and Filters. Such as Pusher Centrifuges, Decanter Centrifuges, Top-Suspended Peeler Centrifuges, Horizontal Peeler Centrifuges, Vacuum Drum Filters. Our company was established in 1958 and a leader in China in the centrifuge and filter fields. Submit your sales inquiry for more info.
 
Company ID: 112733 - Click Here for Full Details
Product Lines:
We Manufacture Gasketed, Brazed, and Welded Heat Exchangers.

Our Extensive Plate Designs Allows us to be Very Competitive. We Stock SS304/316, Titanium and Hastelloy Plates, this Ensures Quick and On-Time Deliveries. 
 
Target Markets:
We are Focusing on the Industrial Markets. That would included Power, Chemical, Refinery, and Engineering Companies. OEMs that Assembly Packages as well. 
 
Sales Opportunity:
We have been in business for over 25 years and provide our Sales Reps with all of the necessary tools to be very successful. We are very easy to work with and have an aggressive commission schedule.
 
Company ID: 112648 - Click Here for Full Details
Product Lines:
Our Company Manufacturers Non-Metallic Gaskets and Products: Neoprene Sponge, Neoprene/EPDM/SBR Sponge Blend, EPDM, PVC, PVC-NBR, Silicone, Viton® Sponge, Open Cell Sponge, Natural Open Cell Sponge, Open Cell Foams, Filter Foam, Convoluted Foam, XLPE, Volara®, Poron® Foam, Ensolite® Foam, Silicone, Acoustic. 
 
Target Markets:
Industries:
HVAC
Electrical/Lights
Power Generation
Transportation
Acoutics
Appliance & Consumer Electronics
Construction/Windows/Doors
Medical
Advertisers, Movies, Television 
 
Sales Opportunity:
Here is a great opportunity to work with an established company and help us grow to the next level. We are able to expand and use more of our capacity to service more customers. We have several machines that were made in-house and able to modify to customers demands. Our team has strong technical knowledge and because we service so many industries, there are always opportunities. We just don't have the sales reps to reach all these markets yet.
 
Company ID: 112644 - Click Here for Full Details
Product Lines:
Air Purification/Sanitization Equipment
Odor Removal Equipment 
 
Target Markets:
Large Production Cannabis Growers. 
 
Sales Opportunity:
We provide a full product line that uses our proprietary technology to protect large cannabis cultivators from the problems associated with microbial and pathogens in their indoor grow and greenhouse environments. This proven technology has been installed in over 5 million sq. ft. of cannabis facilities throughout the USA and Canada. It helps cultivators grow clean medical cannabis minimizing pathogen CFU counts to help them pass regulations.

Used by many of the largest Canadian Growers, helping them pass the strictest regulations in the world. Looking for Representation/Distributors in Australia, Europe, Israel, South America, and other large markets. We will work with the right individual/company to establish terms for a win/win relationship. Please submit a sales inquiry to learn more.
 
Company ID: 112573 - Click Here for Full Details
Product Lines:
Vitamins, Diet Suplements, Medical Equitment, HVAC Systems, Healthcare Products, Beauty Supplies, Hardware, Electrical, Solar Products, Dental Equipment, Electronics, Waste Equipment or/and Trucks, Smart Locks for Hotels, Phone Technology, Buss Wi-Fi Systems, any kind of Trouble Shooting Equipment. 
 
Target Markets:
Central America, Mexico, Central, South America, all Latino America. 
 
Sales Opportunity:
Latin American grew, and goes on process of modernize, development of the past decade, they have needs! And re economy goes better and better, why do no take the opportunity.
 
Company ID: 110972 - Click Here for Full Details
Product Lines:
Our Company Creates and Distributes Business Software.

All our Products are SaaS (Software as a Service). Our Products are for Energy Savings, Capital Expenditure Management, Real Estate Lease Management, and Real Estate Space Optimization. 
 
Target Markets:
Companies from many industries such as: Real Estate Owners, Managers and Developers, Banks, Hospitals, Education (All Levels including Colleges and Universities), Restaurants, Hotels, Grocery Chains, Shopping Centers, Housings, Warehousing, Government, and All Manufacturing. 
 
Sales Opportunity:
Our flagship product is a do-it-yourself energy-saving energy software that enables building owners and managers to rapidly create any type of building,then find potential energy-saving opportunities and estimate them. Users can do this much faster than using an external consultant, and in a much less expensive way (1/8th of normal cost).

In addition to this, we also offer services to customers. Most of our customer request all inclusive services where we enter all information for them and find the energy saving potential. This is extra (paid) service that we offer.

We offer attractive commission rates (for sales of software as well as sales of additional services), for both new contracts and renewals. As a SaaS (software as a service) customers pay an annual right-to-use (membership) depending on the number of buildings they have and their size.

While the territories are non-exclusive, we have made it an internal policy not to seek distributors in regions that would overlap already known distributors regions where the representative is performing adequately. We are looking for long-term relationship with partners who want to grow with our company.

We offer complete training as well as sales and marketing materials (power point presentations, help documentations, brochures, case studies, video, features, and benefits documents, as well as other). We provide complete customer support and training as needed. We are a company with members from Canada and USA.
 
Company ID: 111797 - Click Here for Full Details
Product Lines:
Refrigeration Agitation Device.

Next Generation of Energy Savings Device, 40,000 Units Installed Within the First Three Years, Fully Warrantied, and Patented. 
 
Target Markets:
Grocery Stores, Convenience Stories, Food Processors, Data Centers, End-Users, Energy Consultants, HVAC Supply Company, etc. Any Company that Spends to Much on their Electric Bill 
 
Sales Opportunity:
Client Experience:
15% Guaranteed Savings - Average 25-30% Annual Savings
2-3 year Return on Investment - purchase or lease purchase options
Extends life of Equipment
Protects the Environment

Distributor/Sales Representative Advantage:
Unlimited Earnings Potential
No Competitive Products
Online Savings Calculator
Fast and Easy Installation
Excellent Sales, Marketing and Technical Support
 
Company ID: 111503 - Click Here for Full Details
Product Lines:
Garden Clogs
Sandals
Electric Fans 
 
Target Markets:
Retail Chain Stores, Supermarkets, Drug, and Mass Merchants. 
 
Sales Opportunity:
Our company designs products similar to expensive brands in the sandal and clog categories. For example we have a new item that we believe is nicer than the a Crocs branded product which sells for $29.99 where ours will retail for $9.99 - $12.99. We also have a garden clog which sells for $9.99 and is comparable to items selling for $19.99 to $49.99.

The best value for the customer is direct import, but we can import and reship items. We have various display options from spinner racks to shelf tray packs. Looking for sales reps who have connections to seasonal buyers. We show great margins and had one customer in the northeast tell us that this cold spring when nothing was selling we sold 15 pairs per week per store. We pass all the required material tests.

We make all kinds of electric fans. This factory started making fans OEM for Holmes and went on to be 51% owner of Duracraft who was number 1 in the market before it was sold to Honeywell. We sell this product under a Brand Name. This factory always ships on time and has very low defects.

They make a quality product with better motors and sturdier parts than most. Fans is a very competitive business and when we get a customer we usually keep them because there are so many factories that are late and have big problems. We are hassle free and valued resourse for customers.
 
Company ID: 109915 - Click Here for Full Details
Product Lines:
Printed Circuit Board Assemblies and Box Builds. 
 
Target Markets:
Design, PCB Assembly, Test, Final Box Build Assembly, and Packaging: Medical Product, Industrial Controls, Gaming, Auto Aftermarket, LED Light Boards, etc. 
 
Sales Opportunity:
Please join the professional sales team of our 34 year young. A premier SMT Printed Circuit Board Assembly manufacturer. Finding its “Roots“ as a test house for PCB assemblies. Our approach to this business is what differentiates us from the plethora of houses who claim to be Contract Manufacturers. Reps will be supported by an existing sales force of our company with a variable commission depending on the job.
 
Company ID: 112285 - Click Here for Full Details
Product Lines:
Industrial Gaskets and Gasket Materials. 
 
Target Markets:
Gasket Fabricators and Supply Stores. 
 
Sales Opportunity:
We have two very unique products we are trying to distribute nationwide.

Expanded PTFE - there are only 4 producers in the world of notoriety. Our material is the largest sheet produced 59" X 177" (3 times that of the competition) this is fantastic for improved yield of cut gaskets. One the most common size gasket the savings is 8% considering all prices are the same. But they are not.

General Service Gasket Material NBR/Aramid with NSF-61 Certification at general service gasket material pricing. If you understand what this means you are the rep we need.
 
Company ID: 112071 - Click Here for Full Details
Product Lines:
Steel Fabricating Services: Cutting, Press Brake Forming, Machining, Welding, etc. 
 
Target Markets:
OEMs in many Different Industries: Mining, Bridge Construction, Construction Equipment (Cranes, Bull Dozers, Front-End Loaders, etc. Oil and Gas, Clean Energy. 
 
Sales Opportunity:
We are a 78 year old family business that is currently in its 4th generation of leadership. We serve the Heavy Industrial, Energy, and Defense markets with precision metal fabrications in all sorts of size and scope. We are a build to print shop but we offer our customers input on their designs. We are looking for someone to represent our Wisconsin division that has experience serving OEMs that would use our fabricating services in that region.
 
Company ID: 112046 - Click Here for Full Details
Product Lines:
Our product lines include: Industrial Line Cleaning Solutions; Pulsed Light Technology, Conveyor Lubrication; Dosing; Chemical Storage, Water Treatment, Plant Engineering; Automation & Control; Control Cabinet Design/Build; Piping Design/Build; Tank & Container Cleaning; and Filter Beads. 
 
Target Markets:
Our target market is small, medium and large North American food and beverage processors and producers. 
 
Sales Opportunity:
We are looking for the ideal candidate for our new subsidiary company ‘North America’ to join our team for the position of Key Account Manager.

Reporting to the Global Sales Director, the Key Account Manager will be responsible for:
- Business development with existing and potential North American customers in our new subsidiary company
- Maintain and grow an active customer base of OEM’s and end customers
- Analyze customers' businesses and seek new business opportunities in key success areas and needs
- Manage pricing to assigned accounts and impulses for product innovations
- Provide technical support to assigned customers as required / with the collaboration with our German project department
- Manage and take over responsibility of the new subsidiary and its development
- Plan and communicate the business building activities and direction of the new subsidiary to senior management
- Build and follow the business plan with a view to meet or exceed goals /objectives

Requirements
- Commercial or technical studies for chemical and technical questions, professional experience or completed a post-secondary education
- Results and solutions oriented
- Excellent verbal and written communication and analytical skills
- Experienced in sales of equipment for the food and beverage industry
- Expertise to establish a climate of trust with customer decision makers
- Strong presentation & computer skills
- Travel required ~3 days a week
 
Company ID: 112021 - Click Here for Full Details
Product Lines:
Ours is a Transformer Manufacturing Company in the USA.

We Manufacture Standard and Custom Designed Transformers like Control, Magnet Coils, Auto, Current, Power, and many More Types of Single and Three Phase Transformers.
• Custom Design Transformer
• Furnace Transformers 
 
Target Markets:
Electrical Control Panel Manufacturers
Electronics Manufacturers
Control System Users. 
 
Sales Opportunity:
Ours is a transformer manufacturing company in the USA. We manufacture standard and custom designed transformers like control, auto, current, power and many more types of single and three phase transformers using our experienced staff, latest technology, expertise in designing, manufacturing, testing, delivering, quality control, and great customer service. Product is made in USA with very very comparative price so it's good opportunity with very large market specially new technology innovation require control system across world.
 
Company ID: 111520 - Click Here for Full Details
Product Lines:
The Products that we are selling span the HVACR Industry.

These Products are Refrigeration Accessories that include Filter Driers of All Types, Filter Drier Cores and Shells, Accumulators, Ball Valves, and Oil Separators. 
 
Target Markets:
Target markets include any OEMs or Distributors Serving the Commercial Refrigeration or Residential Air Conditioning Segments. 
 
Sales Opportunity:
Our products have Full Certification for USA and Canada and are available at a competitive price. These products are well renowned internationally but we are just starting to gain presence in North America. Some of our existing customers include Emerson, Carrier, Bosch and Hitachi.

In partnership with another company, a leading NY based company specializing in HVACR leak detection systems, we have developed a range of filter driers that differentiate itself from the rest of the field. These driers are manufactured with a tracer wafer installed inside them. The wafer has got a fluorescent dye embedded in it. In the event of a leak, the dye leaks with the refrigerant and the exact point of the leak can be easily detected by simply shining a UV flashlight on the system.

We offer a competitive, performance based commission of up to 15% to our reps. All marketing support will be provided by us and we carry local stock of the product so you will able to readily fulfill your customer's needs. Please submit a sales inquiry to us if you are looking for an innovative partnering opportunity.
 
Company ID: 110260 - Click Here for Full Details
Product Lines:
Full Line of Automation Components: Pneumatic FRL's, Valves, Cylinders, & Controls.

Rotary and Linear Precision Electrical Actuators. Process Valves Ranging from Standard Brass Body Construction to Ultra-High Purity Chemical Valves. Many Unique and Patented Products. 
 
Target Markets:
OEM Manufacturers of Automated Equipment and Large MRO Accounts with Significant New Project Potential (Food & Beverage, Chemical, Pharmaceutical, Automotive Tier 1, etc). "Crossover" Work vs. Competitors at User-Level Accounts is Not Desired. Creation of Secondary Distribution Channels Possible. 
 
Sales Opportunity:
Complete access to a vast range of products for every application. Price competitive high-performance products make value evident for every customer. Factory direct technical support and marketing collateral available. Commission structure negotiable based on experience, target market and geography.
 
Company ID: 111604 - Click Here for Full Details
Product Lines:
PLCs, Touch Screens, Contactors, Relays, Overloads, Circuit Breakers, Mini-Circuit Breakers, Manual Motor Protectors, VFDs, and Soft Starters.

These are Low Voltage Products. Medium Voltage VFDs and Medium Voltage Soft Starters. Complete Custom Control Panels and Packaged Pump Panels. 
 
Target Markets:
Oil and Gas, Plastic OEMs, Marine, Machinery Builders, Panel Builders, Irrigation, Anything that has to do with Pumping Fluids or Solids. 
 
Sales Opportunity:
We pay you a handsome commission and give you a defined territory, plus we will give you accounts to start your business. We offer sales product training, sales help, plus we service what we/you sell.
 
Company ID: 111603 - Click Here for Full Details
Product Lines:
Ours is a Line of Unique Hand Tools that are 7X Faster to Operate and 100% Easier to Use. 
 
Target Markets:
Costco, DIY, Home Improvement, Wholesale Distributors. 
 
Sales Opportunity:
These tools are a line of products that are unlike any other line of tools in the industry. This affords a rep agency the opportunity to market a product line that has no equal.
 
Company ID: 111087 - Click Here for Full Details
Product Lines:
BBQ Products and Accessories, Casual Furniture, Outdoor Residential, and Indoor or Outdoor Contract Commercial.

Chemical and Related Products for Marine, Cleaning, and Industry. Well Established and Premium Product Lines and a Growing Catalog. 
 
Target Markets:
Premium Independent Hearth, BBQ, Patio and Pool Shops. Marine Businesses, Marinas, Residential, and Commercial Cleaning Companies. RV Dealers. We have just Begun Building the Catalog. 
 
Sales Opportunity:
Expanding to Ontario and Quebec! Seeking Independent Sales Reps.

A respected, established agency in the hearth, patio and BBQ industry mainly in Atlantic Canada and BC. We are bringing on a number of new, exciting new lines in BBQ, Hearth, and Patio as well as commercial, marine. We have only begun to scratch the surface with the potential of these products and the market for them in ON and QC.

Our company represents only lines of the best quality and we are a looking for experienced representatives who grasp the potential for income in this market and and ready to work with some amazing lines.

Ideally, you will have experience in one or more of the following
- Home heating
- Hearth
- Fireplaces
- Wood stoves
- Patio/leisure

We are seeking experienced, independent reps. We will train the right candidates. French is an asset.
 
Company ID: 109485 - Click Here for Full Details
Product Lines:
Onsite, On Demand, Base Load or Off Grid Renewable Energy 24/7 at Savings of 30-80% Compared to the Grid.

No Carbon Footprint, No Diesel. Completely New Technology. 
 
Target Markets:
Remote Sites, Governments, Commercial Facilities in Areas where Energy is Expensive. 
 
Sales Opportunity:
Few providers of renewable energy provide power 24/7, without expensive storage. Our systems provide power on demand for less than solar or the grid. Perfect solution for critical services, first responders, remote operations, or anyone who wants to transition to renewables and save money at the same time. Demo sites available.
 
Company ID: 111373 - Click Here for Full Details
Product Lines:
Our company is the Exclusive Distributor of Best-in-Class PP-RCT 125 and PP-R Super 80 Fusion Pipe and Fittings.

NSF/ANSI 14, 51, 61, and 372 Certified for a Range of Pressurized Fluid Handling Applications, it has a 30 year Warranty when Installed by our Certified Contractors. 
 
Target Markets:
Engineers, Contractors, and Builders Demanding a Non-Corrosive, Lighter, more Durable, and Longer Lasting Fluid Handling Piping Solution than Metals. Our PP-RCT 125 Pipe is Available from ˝" through 24” in Diameter. It Endures the Highest Pressure and Temperature of any PP-RCT Pipe. 
 
Sales Opportunity:
PP-RCT is growing in market share in Europe, and it is destined to become a preferred piping solution in North America. This is an ideal time to commit to what promises to be a highly lucrative opportunity.

We have manufactured industry leading PP-RCT 125, PP-R Super 80, PEX-AL-PEX and other plastic pipe and fittings since 1985. Additional innovative products include patented Safety fittings, pre-insulated pipe, and the proprietary Fusion-Tech UV Black pipe and fittings (Patent Pending).

Check out the advantages that makes it "Best in Class" PP-RCT 125 piping:
✓ 30-Year Warranty: the longest and most comprehensive
✓ The most advanced raw materiall
✓ Highest pressure ratings in the industry
✓ Highest temperature ratings in the industry
✓ Very low pressure drop
✓ Low noise transmission
✓ Expansion coefficient similar to copper
✓ Exceptionally high corrosion resistance
✓ Scale/Loading resistant
✓ Very low noise transmission
✓ The only manufacturer with Class 5 chlorine resistant product through 24" diameter
✓ 100% virgin material
✓ Piping available in SDR 7.4, SDR 11 and SDR 17.6
✓ Injection molded fittings through 12" diameter
✓ 100% Recyclable
 
Company ID: 111410 - Click Here for Full Details
Product Lines:
Custom Made Injection Molded Parts, Components, and Assemblies. 
 
Target Markets:
Tier 1 Suppliers to and OEMs in the following Industries: Recreational Vehicles, ATVs, Heavy Equipment (Construction, Agriculture, Material Handling), Marine, Aviation, HVAC. 
 
Sales Opportunity:
We are assisting a 20+ year old top US engineering, design, and distributor of custom molded plastic, rubber, and electronic components in diversifying from the automotive industry into other industry niches. So we are looking to engage experienced sales reps who already call on customers in the targeted industries
 
Company ID: 111154 - Click Here for Full Details
Product Lines:
The Worlds Only Patented, Award Winning, Powered Laundry Chute.

Residential Models includes a Return to Bedroom Loop System. Commercial Models for Hospitals, Nursing, Retirement Homes, Business Premises, Cruise and Larger Boats, Ships, etc. 
 
Target Markets:
Residential - Homeowners, Builders, Architects, Home Designers, Interior Designers.
Commercial - Hospitals, Retirement Homes and Builders of Retirement Homes, Ship Builders, etc. 
 
Sales Opportunity:
Work with us as the manufacturer of the newest category of home appliance, the powered laundry chute. Stylish wall ports in bedrooms, bathrooms, and closets take all bedsheets, pillow cases, blankets, towels, and clothes to the laundry room with a clever air flow system, no matter what floor or location it is in, at the touch of a button.

No more smelly laundry baskets in your living space. No more carrying dirty laundry baskets up and down stairs. Kids love it too! Sell a Patent Pending product with no competition. Exclusive territories. Extensive road map of new options and products for the future.

Sell 21st Century home technology and be supported by a professional and end-user focussed organization with a management team with a combined 60 year plus experience in manufacturing, tech support, global distribution and innovation. Our product comes in a range of three different systems to suit any sized home or budget from the smallest 1 port option to the largest 8 port system.

Our product is designed for any sized home or number of rooms and ports and is modular, so perfect for any home’s specific layout. Larger commercial units for hospitals, retirement and nursing homes, cruise ships, Navy, etc give you excellent B2B products. Systems run from $2,000 - $100,000 with attractive commission and the possibility of adding installation services. Territories still available: All US states, South Africa, South America, Middle East, Asia, Canada, Russia.
 
Company ID: 111227 - Click Here for Full Details
Product Lines:
Protective Coatings (Predominately Paint) - the Range includes High Performance Protective Coatings from a Leading Global Manufacturer, Niche Products from Household brand Rust-Oleum, as well as our Own Light Industrial Range, which can also be Modified and Adapted to Meet bespoke Requirements. 
 
Target Markets:
Heavy Industries - including but not limited to Offshore, Oil & Gas, Fabrication, OEMs, Contractors (Flooring, Roofing, Siding), Construction, and Builders Merchants. 
 
Sales Opportunity:
We are a relatively new family owned business in TX, but with the backing and support of the wider group located elsewhere in the USA and overseas. This is a fantastic opportunity to help us break into the largest coatings market in the world, with us able to offer the niche service requirements that only a company of our size can truly offer, but with the backing of global protective coating (paint) manufacturers, to meet any specification or general coating requirement.
 
Company ID: 111226 - Click Here for Full Details
Product Lines:
Polyester and Polypropylene Strapping. 
 
Target Markets:
Accounts that Use Poly Strapping for Shipping their Products. 
 
Sales Opportunity:
Looking for independent sales reps nationwide that know where the end-users are in their territory. We manufacture premium quality poly strapping and have the best prices and payment terms in the industry. Above industry average commission rates.
 
Company ID: 111200 - Click Here for Full Details
Product Lines:
Heavy Duty Industrial & Commercial Filtration Products:
- Simplex Strainers
- Duplex Strainers
- Seaview Strainers
- Transfer Valves
- Direct Drive Pumps
- Belt Drive Pumps 
 
Target Markets:
Consumers, Government Agencies, Anyone Interested 
 
Sales Opportunity:
Our company is a well-established engineering and manufacturing firm specializing in simplex and duplex strainers, filters, and transfer valves for pipeline service.

Our products are generally applicable to all phases of liquid handling service. For example, cast iron and steel pipeline strainers and filters are commonly used on fuel oil, lubrication oil, and hydraulic oil. Cooling water and petrochemical applications often require bronze or stainless steel units.

We offer a full range of port configurations, including NPT threaded, socket weld, and flanged connections with pressure ratings from suction service up to class 1,500 and higher. Duplex models are especially important where continuous flow must be maintained with no shut down during cleaning of clogged strainer elements.

Our customers encompass a wide variety of markets in the fuel oil, petrochemical, facilities construction, marine, paper, and food processing sectors. Emphasis is on original equipment manufacturers (OEMs) who utilize our products in their systems.
 
Company ID: 111195 - Click Here for Full Details
Product Lines:
Effective Indoor Air Quality Solutions.

Using Plasma, our Units Reduce the Chance of Airborne Infection Transmission, Reduce Allergens and Odors. Easy to Install. Requires Little Maintenance. Quiet, can be Used in Offices or Bedrooms. All that is Needed is a Standard Electrical Wall Outlet. 
 
Target Markets:
We are Focused on Developing and Executing Growth in New Verticals Focusing in Improving Indoor Air Quality. Customers who have a Need to Reduce Airborne Contaminants such as Bacteria, Viruses, Mold, Dust, Pollen, Allergens, and Odors. Examples: Veterinary Clinics, Pet Stores, Hair, and Nail Salons. 
 
Sales Opportunity:
This opportunity offers maximum upside for an experienced sales professional to sell a new, innovative product to their existing customer base and prospects. The sales rep will use their exceptional communication skills to learn about the customer, assess the need, provide the right solution and submit orders.

We understand that superior customer interactions drive our growth and our commissions are aligned with that philosophy. We invest in our team and offer comprehensive training and support to ensure success. Our products are “plug-n-play”, proven and easy to maintain. Customers praise our solution and NASA has validated it.
 
Company ID: 110501 - Click Here for Full Details
Product Lines:
Air Quality Products.

We are the Global Leader in 2-in-1 Humidifiers + Air Purifiers. We Use No Filters and we have a 10 Year Warranty! Our units do not emit bacteria like most other humidifiers or produce ozone like many purifiers. 
 
Target Markets:
Vacuum Cleaner Dealers, Independent Electronics, Hardware and Housewares. We also have interest in Infant Stores. I am very interested in B2B opportunities, particularly in Allergy and Health Clinics. 
 
Sales Opportunity:
Ours is a global company that manufactures high-quality German manufactured products. We are seeking reps that can penetrate the local stores or B2B opportunities. The average independent store sells approximately $20,000 a year of our 5 Series product.

10,000 doctors worldwide have our product in their practice and/or home. 48% of our consumers that purchase a Venta own more than one machine. We can be found from offices at NASA to the homes of Edward Norton and Jose Carreras. We are a great company that offers effective product.

Submit a sales inquiry and I'd be happy to discuss our product in your markets. Thank you.
 
Company ID: 110919 - Click Here for Full Details
Product Lines:
Broad Line of Plastic Fasteners, Wire Routing Devices, Cable Ties, and Accessories, Cable Clamps/Clips, Circuit Board Supports, Bumpers/Feet, Rivets, Plastic Screws/Nuts, Spacers/Standoffs, Card Guides, Edge Protection, LED Spacers, Electrical Terminals/Wire Connectors and Misc. Components. 
 
Target Markets:
Fastener Distributors, Electronics Distributors, Electrical Distributors & OEMs including but not limited to Automotive, Gaming, Medical, Contract Manufacturing, Circuit Board Manufacturing, Wire Harness Shops, Lighting Manufacturing, General Assembly Operations, and many others. 
 
Sales Opportunity:
We are a designer, manufacturer and distributor of plastic components and plastic hardware accessories providing a broad product offering and delivering a proven "whatever it takes" commitment to our valued associates and our growing list of customers. Founded in 1993 we are about to enter our 25th year in the marketplace.

Design Specification and Print Position are critical to our ongoing growth and success. Many of our products are made from our own proprietary tooling that can in many cases be modified to meet special requirements at reasonable costs. Attention is focused on providing consistent high quality along with very competitive piece part costs in an increasingly demanding environment. We pay our representatives on a fair and competitive commission structure.
 
Company ID: 109307 - Click Here for Full Details
Product Lines:
Our Product Line is an Aluminum C-Channel Bracket with has Adjustable Locking Rubber Clamps that is mounted to a Standard Landscapers/Homeowner's Trailers.

The Bracket Allows the End-User to organize hand toys shovels, racks, axes, weedwackers etc. 
 
Target Markets:
Landscaping Supply Dealers, Lawn & Tractor Dealers, Tractor Dealers, Do-IT-Yourself Wholesalers, Golf Courses, Commercial Maintenance Department, Independent Home Supply Wholesalers, Retail Wholesalers, Gardening Centers, etc. 
 
Sales Opportunity:
We currently have the US & Canada areas available that we are looking to fill ASAP. Don't wait you will miss out on a great product line with no competition. You will have total control of setting the pricing for our product line in your territory. A salesman's dream line! Act now before you loss out on a great line to create more revenue for your company & we are paying higher than average commissions plan for all new reps! This will be the best line you've ever had and you will make allot of money!
 
Company ID: 110599 - Click Here for Full Details
Product Lines:
Energy Efficiency Innovator seeks HVAC Specialists and others with access to Commercial Buildings & other Large Facilities to Retrofit Small Motors, Fan Blades, etc.

Each Replaced Item Saves Electricity and Money. Savings 100% Quantifiable. Strong ROI. Reduces Monthly Utility Bills 20 - 25%. 
 
Target Markets:
Marketplace virtually unlimited:
Commercial Buildings
Malls
Campuses
Hotels
MUSH (Municipal, University, Schools & Hospitals), etc.

We call on:
Facilities Management
Sustainability Directors
Energy Managers
CFOs & Controllers
Engineering & HVAC People/Vendors 
 
Sales Opportunity:
Retrofitting small motors and fan blades is a concept that is sold just like an LED lighting retrofit.

Small motors and fan blades are a high-value target for reduced consumption and lower electricity bills. They spin constantly, and consume power that could just as easily be saved.

We have the name recognition, the track record and the voluminous research, product development, measurement, and verification, for prospective customers to know they can be confident in working with us. We meet the numbers offered up in proposals, because we've sweated the details and know our stuff. We have a team that generates the proposals, too.

We have the information, documentation, case studies, etc. to give our sales associates the data they need to close deals. We have an in-house Rebate Department that takes care of a) getting our offerings eligible on the utilities' rebate lists, and b) getting the customers their rebates as promised. Nothing beats a customer that's pleased to see you on a rebate list.

We are looking to put one person in each metropolitan area, and have about 35 cities in mind. (If you are an HVAC vendor or a well connected HVAC person, you may already have the potential customer part of the equation covered. I will work with you on a different equally lucrative direction.)

1099 contractor position. Straight commission plus bonus.
 
Company ID: 49369 - Click Here for Full Details
Product Lines:
We manufacture Disposable Shoe and Boot Covers with non-skid treads (Polypropylene and CPE) We also carry our own line of Black Nitrile Gloves (6 Mil Thick & 5 Mil Thick) 
 
Target Markets:
Food Prep Plants
Pest Control Supply
Hardware and Paint Stores
Plumbing Supply
Safety Supply
Day Care
Poultry Supply 
 
Sales Opportunity:
We are able to beat the biggest seller of Disposable shoe covers on quality, price & # of Shoe covers per box. We are the manufacturer and we are looking for quality reps (not the guys who say they are going to sell and then just lay back and wait for sales in their territory). We pay you within 7 days of us receiving payment. We can offer you a price range so you can earn the most profit!
 
Company ID: 110837 - Click Here for Full Details
Product Lines:
A patented device: This switch is designed to save lives. It recognizes all types of alarms (smoke, co2, water, etc.), audio and visual detectors/sensors, via; wifi, direct wire and more. This switch turns off the appliance, gas, water, etc. in the event, it has been an alarm detected. 
 
Target Markets:
HVAC Electrical distributors, contractors, appliance manufactures, ie; GE, Kenmore. Big box outlets, ie; Home Depo, etc. 
 
Sales Opportunity:
This new technology and our line of devices will revolutionize the world with "Smart Home Safety Devices". Our products will soon be International building code certified and should be in every home. We are looking for Reps, to join our family and help put us in every home world wide !! Please check out our website to get a better understanding of who we are and feel free to reach out to us.
 
Company ID: 99189 - Click Here for Full Details
Product Lines:
Our company Manufactures and Market Electrial Wire and Cable Specializing in Low Voltage Products in the Alarm and Security Field.

Also in the Marine, Boating, and Automotive Industries. We are Offering our New Highly Sellable Coil Packs Wire Cable with Many Great Benefits to the End-Users. 
 
Target Markets:
Our market is to Cable Installers, Wholesalers, Distributors, Retailers, and Contractors. We also Offer our Products to OEMs, Utilities, and the like along with B2B sales. 
 
Sales Opportunity:
Our company is looking for highly motivated sales reps and distributors for is low voltage wire and cable products. We are able to offer any sales assistant,collateral and tech consolation when needed. We have a powerful sales tool, being able to offer purchase financing to the customers even to stocking distributors those who qualify.

This program is a great benefit to reps for there commission to be paid quickly as all orders that go through are prepaid no wating for the invoicing and bill being paid, are commission are out by the fifth of the month. Our commissions are base 15% of all sales made by Rep. monthly. We offer residual sales.
 
Company ID: 110522 - Click Here for Full Details
Product Lines:
New Patent Pending Dispensing Cap.

Medical Disbursement and Commercial. It has a Super Hydrophobic for Medicine Delivery in Bottle, Vitamins, or Simply any Dry Thing you Want to Drop into a drink. 
 
Target Markets:
Sports Drink Makers
Medical Dispensers
Alcohol and Spirits
Juice Makers and many more 
 
Sales Opportunity:
This Patent Pending technology is great - because the technology is protected, the reps are protected. If you have access to the manufacturers of medicines or any of the items listed in the target markets. This could be lucrative and beneficial to yourself, us, and the customers. We love win, win, win.
 
Company ID: 110629 - Click Here for Full Details
Product Lines:
Residential & Multi-Family Ventilation Systems:
Single-Multi-Port Energy Star Ventilation Fans
Wide range of Heat Recovery (HRV) & Energy Recovery (ERV) Ventilators
Zoned Ventilation Solutions for Whole House and Single Room Ventilation
Precise Airflow Control & Make-up Air Solutions 
 
Target Markets:
Wholesale Distribution for Residential Building. 
 
Sales Opportunity:
Our company is the premier manufacturer of ventilation products and systems for homes, multi-family dwellings, hotels, schools, and more. For more than 30 years, American Aldes has resolved challenging indoor air quality issues by taking a “systems approach” to ventilation. American Aldes products are designed for superior airflow control, energy-efficient performance, and a healthy indoor environment.

We have specialty ventilation products for single-family homes all the way to towering commercial buildings. Builders seeking LEED project credits or designers working within challenging constraints will find our products are cost effective and suited to their particular ventilation and indoor air quality needs.

When designing your ventilation solution, the experts here consider many building factors: environmental conditions, building type, occupant demographics, local codes and regulations, as well as budget considerations. This thorough analysis ensures that the product you receive will be a tailored solution for long-lasting performance.
 
Company ID: 110600 - Click Here for Full Details
Product Lines:
Green sand Brass and Bronze Castings.

High Speed Automatic Molding Facility with Open Capacity. Leaded and Non-Leaded Castings. ISO Reg QMS. Lean Facility Adept at Small and Large Quantity. 
 
Target Markets:
Valve Manufacturers, Water Meter Manufacturers, Electrical Component Manufacturers, Pump Manufacturers, Fire Protection, 
 
Sales Opportunity:
130 year old Brass and Bronze foundry seeks to fill open capacity. Service oriented, high speed, low lead time facility in South Eastern PA. Mature ISO QMS. Skilled in manual to automatic molding tooling conversions and leaded to non-lead conversions. Extremely customer focused and responsive.
 
Company ID: 110572 - Click Here for Full Details
Product Lines:
We have a Proprietary Tool Design that Allows us to Sell High Quality Injection Molded Prototypes to Customers of Various Industries.

The Rapid Prototype Segment of our Business has been the Core, however we have Added Small Volume Production to our Offering. 
 
Target Markets:
We currently sell to the following markets:
Small Engine
Appliance
Automotive
Plumbing

We are interested in selling to these additional markets:
Medical
Aerospace
LED
Caps and Closures

Most of our Success comes when Linking our Engineers with the Engineering Team of the OEM. 
 
Sales Opportunity:
We are a small organization and only 2.5 years old. We have a team of young and talented engineers who are excited to grow in this industry. Our team is talented and exciting to work with. We are looking for dynamic growth opportunities and are excited to expand. Reinvestment in technology is the cornerstone of our business plan and we want to change the way the OEM world thinks of prototypes.

We are looking for dynamic team members that could open doors to new business opportunities and that would like to be a part of new and different manufacturing strategies.

Our focus is on technology and automation meaning our pricing is globally competitive and we do not lose many opportunities we come across. Our primary obstacle is managing growth, and that is why we are looking to add some strategic partners who understand how to grow effectively. We are not looking to be "all things to all people." We know our sweet spot, and that is where we want to grow.

We are excited to find partners who share in this vision and want to be a part of a growing and dynamic business. The commission structure would be discussed off line. However, we feel that our offer is more than competitive based on market data we have reviewed.
 
Company ID: 110513 - Click Here for Full Details
Product Lines:
Industrial and Commercial Noise Reduction and Abatement Equipment both as a Product Line and Custom Engineered, Designed, Fabricated, and Delivered On Time. 
 
Target Markets:
Noise Consultant Professions, Mechanical Contractors, Architects and Engineering Companies, Electric Generating Power Plants, Coal Companies, Axial and Centrifugal Fan Manufacturers, etc. 
 
Sales Opportunity:
Our company was founded in 1960. We are the oldest, to the very best of our knowledge, "Women Owned and Operated" Sound Abatement company in the United States. We are Certified ISO 9001. 2017 Standards for design, engineering, and manufacturing.

Our products are manufactured solely in the United States, plus sold and distributed through the Middle and Far East. Our standard and customer product line consists of, but not limited to, Gas and Steam Turbines Inlets, and Exhaust acoustic treatment. All national recognized axial and centrifugal fans can be adapted our our inlet and exhaust silencers.

Highway and Industrial Sound Barriers, Sound Containment, and Absorbing Enclosures, Electric Motor Silencers, Stack Stuffer Silencers, HVAC Duct Silencers, Steam and Gas Blow-off Silencers, Inlet and Discharge Coal Mine Shaft Silencers, with a very strong past background for custom designed sound abatement projects. We have engineering and manufacturing facilities in both New Jersey and South Carolina. We have little, or no representation now, but are seeking to secure sales representation within the United States.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2018
LINKS | SITE MAP | TERMS OF USE