Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Filtration & Purification\Pollution Control Equipment & Supplies
Click on Company ID to View Full Details
Company ID: 113751 - Click Here for Full Details
Product Lines:
Our Product is a Fan Coil Unit Integrated with Heat or Energy Recovery Ventilator in One Single Indoor Piece.

This Indoor Fan Coil shall be a Connected to an Outdoor Air Cooled Condenser or Heat Pump Unit or to Water Cooled System (Heating or Cooling). 
 
Target Markets:
These Products are a Good Fit for Residential and Light Commercial Applications such as: New Homes, Schools, Green Buildings, High Rise Buildings. 
 
Sales Opportunity:
I believe this is a good opportunity for an agent to sell for these reasons:

1- New, reliable,High efficient and green technology for new buildings and homes.
2- Custom type design which can accommodate different applications and fit different needs depend on customers.
3- price is not expensive compared to low cost low quality fan coil products (only about 5% higher than standard products) and payback is quick for end-user.
4- Nowadays, a lot of end-user are seeking a high efficient and robust equipment.
5- Control is very smart to maintain a high level of comfort and optimization of energy for your building.
6- All in one single piece (heating,cooling and ventilation).
7- One controller will do all of that.
8- No balancing required when you connect a traditional fan coil with a new HRV/ERV unit.
9- Very high efficient at part load operation due to the fact of using fully variable speed fans and compressors.
10- I am the engineer and owner for this company with over 12 years of experience in HVAC industry and I know that this product will find its marketshare with the right partner/agent in each of the US states.
11- For heat pump applications, we are offering, air to water, water to air, water to water, and air to air heat pumps. This heat pump is suitable for a cold climate region as well as it can operate down to 100% heating capacity at 7F for COP = 2.
 
Company ID: 109083 - Click Here for Full Details
Product Lines:
We Manufacture a Premium, 100% Recycled Rubber Rooftop Pipe, Conduit, Duct, Solar Support that Spans Many Industries.

We have 5 SKUs that Consist of 85% of the Business but we also do many Custom Assemblies for Govenrnment and Private Industries alike. 
 
Target Markets:
1) Electrical/Mechanical Contractors Direct
2) HVAC Direct
3) Solar Contractors Direct
4) Sheet Metal Direct
5) Roofing Wholesale or Direct 
 
Sales Opportunity:
We recently purchased a 30,000 sq. ft. facility and as such have increased our manufacturing capacity nearly 4X. As a result, we now have the inventory to support Sales Reps in new territories and markets previously ignored. We are the low cost producer of this type of support in the world. Even China can't compete with us.

We have 5 North American warehouses with plans to buy 2 more by the end of 2017. What this means, is you'll have access to the right product, at the right price, with industry low lead times. This is an estimated $190 million per year industry and growing 10-15% per year as wood is being written out of the building code in most states.
 
Company ID: 108293 - Click Here for Full Details
Product Lines:
Custom Manufacturer of Industrial Curtains including Plastic Strip Doors, Curtain Walls, Airport Baggage Handling Conveyor Curtains, Clean Room Curtains, Laser Barriers, and Data Center Hot Aisle/Cold Aisle Containment Systems. 
 
Target Markets:
We provide Industrial Curtains to a range of Industries including Aerospace, Airport, Automotive, Biotech, Clean Room, Cold Storage, Data Centers, Electronics, Medical Device, Pharmaceutical, & others. Sales are Made to End-Users, Contractors, OEMs, and Resellers such as Material Handling Companies. 
 
Sales Opportunity:
Our company takes pride in fabricating custom products to fit the specific needs of each and every application presented to us. The product is delivered in a timely fashion at a reasonable price. Using UPS as our standard carrier, all orders are received no more than five days after they are shipped, at a low negotiated price.

In business since 1978, we use materials of the highest quality and can provide test data in regards to anti static properties and flame spread capabilities for all of our flexible vinyl materials. Our company supports its representatives by maintaining an up to date web and social media presence which along with our participation in trade shows provides qualified leads. Our commission structure of 10% to 25%, based upon product and customer type, affords manufacturer reps a great earning the opportunity.
 
Company ID: 113277 - Click Here for Full Details
Product Lines:
Wood Flooring. 
 
Target Markets:
Flooring Dealers, Lumberyards, Kitchen & Bath Showrooms, A&D. 
 
Sales Opportunity:
Beautifully Sustainable Flooring.

Tesoro Woods is a certified advocate of sourcing sustainable materials and using eco-friendly, low-VOC finishes and glues to minimize the impact on indoor air quality and health. Living up to our name, Tesoro Woods prizes wood as a treasure, where every product meets the highest environmental and health standards while looking beautiful.

We are committed to providing our customers with high-quality, beautiful and healthy products that are among the best in the green flooring business. We offer a variety of beautiful, well-milled domestic and exotic hardwood flooring products that come from recycled materials and sustainably managed forests. Learn more about the sustainable sourcing certifications and the eco-friendly characteristics of our products in our Environmental Attribute Guide.

How We Operate:
Our company is a flooring distributor, distributing residential flooring products through a select network of authorized dealers across the country. Homeowners may purchase our products at their local authorized dealer. For your home’s next floor, find a local dealer near you today. Our authorized dealers have access to a multitude of resources and displays and are featured on our Dealer Locator. Apply to be an authorized Tesoro Woods dealer today.
 
Company ID: 112494 - Click Here for Full Details
Product Lines:
Cinchseal is the Most Unique Seal in Today's Process Industries.

The Special Design Quickly Improves Operating Performance for Many Processes for Bulk Equipment! It Provides Upgraded Performance, Enhancing Sales Opportunities Resulting in Impressive ROI Numbers! 
 
Target Markets:
Food Process, Confectionary, Commercial Bakeries, Cheese, Breweries, Distillers, Chemical, Pharma, OEM Equipment, Off-Shore Oil, any Industry that Uses Rotating Shafts that Move Through a Bulkhead! 
 
Sales Opportunity:
We have expanded world wide with a product that has a definite need! We are looking for a company or person that has engineering abilities, hands on, person to person selling skills. Join our team, get education, direction, and support in the field. If you like to work with positive results supporting, your customers helping them improve, this is the right product for you. Spare parts business builds a great base and this is not big capital spending!
 
Company ID: 112279 - Click Here for Full Details
Product Lines:
- Biological Safety Cabinets (Class I, II, III)
- Isolators
- Fume Hoods
- Powder Handling Equipment
- Climatic Control Systems
- Clean Environments
- Powder Handling Equipment
- Flexible/ Disposable Containment
- Fixed and Modular Lab Furniture
- Lab Automation Enclosures 
 
Target Markets:
Pharmaceutical
Biotech
Biomedical
University
Hospital
Compounding Pharmacies 
 
Sales Opportunity:
Our company is headquartered in Oxford, MA was founded to fill the need for a single supplier of a wide range of exposure control technologies. Ours is a value-added distributor and manufacturer of best-in-class solutions. Offering CE, FDA, LEED, OSHA, NIOSH, and USP 800 compliant exposure control equipment.

Some of the industries we work with are: Pharmaceutical, Biotech, Biomedical, Healthcare, and University industries. This, combined with many years of experience, superior customer service, and local coverage across the entire U.S. - we are able to offer nothing less than just the right solution!

In addition to quality products and systems, we also offers services including installation, user training, preventive maintenance, validation and qualification documentation, and Factory and Site Acceptance Tests (FAT/SAT). Rather than squeezing an application into a certain "style" or "type" solution, we will offer the right equipment for the application that fits the needs, desires, and budget best!
 
Company ID: 112048 - Click Here for Full Details
Product Lines:
Factory Packaged Double Wall UL Listed Day Tanks, Pump Sets, and Control Panels, ASME Vessels Manufactured in Sizes 10 Gallons to 50,000 Gallons. 
 
Target Markets:
Data Facilities, Nursing Homes, Fire/Police Departments, Contractors Who will be Installing a Generator or Boiler. "Mission Critical Environments". 
 
Sales Opportunity:
We are a small family owned company in business since 1998. We have the ability to install our products for a turnkey single source responsibly. We design and manufacture systems for power generation and liquid automation. Commission structure on products ranges from 15%-10% average project is $25K.
 
Company ID: 96444 - Click Here for Full Details
Product Lines:
NXKEM is looking for Chemical Sales Agents.

We Pay Commissions BTW 25% to 40% of the Sales Price. We Market our NXKEM Brands of Cleaners, Lubricants, Disinfectants, Adhesives, etc., and a Complimenting Line of NXTEC MRO Items with Access to a Million+ MRO Products. 
 
Target Markets:
Any type of Facility: Schools, Healthcare, Manufacturing, Office Buildings, Government, Military, Transportation, Marine, Airlines, Lodging, etc. We have Access to Over One Million Products, so we Cross many Different Market Segments. 
 
Sales Opportunity:
You Must have a Chemical Sales Background and have an existing book of customers to be considered. We Pay the Highest Commission Rates in the Industrial Sales Sector, so we only want Rainmakers. If you are a Rainmaker - We have a Great Program for you! Please submit a sales inquiry to us immediately! We pay commissions Twice a Month on Invoiced and shipped orders - so you do not have to wait on your commissions.
 
Company ID: 109994 - Click Here for Full Details
Product Lines:
1. VRF Up to 64 Zones, Heat Pump Heats Down to -22F Ambient, the Lowest in the Industry, Heat Recovery, Solar PV Assisted.
2. DC Inverter Heat Pump 1-9 Zones
3. PTAC/PTHP (42x16") 208-230/1/60 and 265-277/1/60 AC or HP+ Electric Heater 07/09/12/15K, Replacing Major Brands on the Market. 
 
Target Markets:
1. HVAC/Mechanical Distributors and Contractors (if no distributor)
2. HVAC/Mechanical Design/Specifying Engineers/Consultants
3. Property Owners, Builders, and General Contractors
4. Hotels Owners, Hotel Management Groups and Hotel Builders
5. Corporate Purchasing
6. Government Purchasing 
 
Sales Opportunity:
HVAC & R Representatives in all States of US and all Provinces of Canada (Huge Opportunities).

* Engineered products of great features and high qualities
* Staffed engineers of broad knowledge, experience for best support and customer service
* You sell to good customers, we do the rest.

All electric heat pump heating down to the lowest in the industry -22F allowing to replace traditional "AC+Gas Furnace" in all applications.
1. Mini-split for residential and light commercial projects;
2. VRF for residential, commercial, institutional and hospitality projects, small and big;
3. PTAC mainly for hotel/hospitality industry.

Similar or even better product features and qualities to those brands in the 1st tier:
a. Mini-split and VRF - Mitisubishi, Daikin, LG, Fujitsu, and Samsung.
B. PTAC-Amana/GE but at much better pricing and service.
 
Company ID: 111561 - Click Here for Full Details
Product Lines:
Line of High-Temperature Technical Ceramic Coatings. ITC Coatings increase energy savings, protect against corrosion and wear, reduce emissions, and increase the life of equipment and refractory. Applied to metals, castables, gunnables, brick and fiber insulation. 
 
Target Markets:
Manufacturers of Steel, Aluminum and Non-ferrous, Power, Waste-to-Energy, Petrochemical, Hydrocarbon Processing, Cement, Lime, Gypsum, Pulp & Paper, Incinerators, Brick, Porcelain and Tile, Foundries and Heat Treaters. 
 
Sales Opportunity:
We are a small, growing business with amazingly effective products looking for individuals with industry experience and we are offering commission-based, incentivized, regional sales opportunities in the US. Multiple regions available. Exclusivity negotiable. No house accounts. Full training and support.
 
Company ID: 108041 - Click Here for Full Details
Product Lines:
Precision Industrial Temperature Sensors and Accessories including Thermocouples, RTDs, Thermowells, Protection Tubes, Wire, Fittings, Indicators, Controllers, and Components. 
 
Target Markets:
Power Generation
Chemical
Oil & Gas
OEMs
MRO
Pharma
Food & Beverage
Material Processing
Forging
Mills 
 
Sales Opportunity:
Our products are used in almost every industry around the world. Recurring sales due to consumable nature of our products. Technical Expertise and excellent service focusing on guiding our Reps with all inquiries, ultimately providing success to both parties. Growing company seeking a partner to grow with.
 
Company ID: 107027 - Click Here for Full Details
Product Lines:
Metal Fabrication, AWS Certified Weldments, Assemblies, CNC Machining, and Painting in Mild Steel, Stainless Steel, and Aluminum.

Our Core Business includes Small or Large, Simple or Complex Weldments, Enclosures, Electrical Boxes, Tanks, HVAC Assemblies for the Mass Transit Industry. 
 
Target Markets:
Mass Transit, Healthcare, Fast Food, Minor Capital Equipment, Food Service, HVAC, Energy, Material Handling, Pharmaceutical Industries, etc. 
 
Sales Opportunity:
We have been in business since 1974 and our clientele consists of major domestic and international customers. Our core business is metal fabrication with the capability of complete turnkey electromechanical assemblies.

Our weld certifications are: AWS D9.1, D1.1, D1.2, D1.3, D1.6, and AWS D17.2 (MIL-W-6858).

The manufacturing capabilities consist of:
- CNC Lasers
- CNC Turrets Punch Presses
- Press Brakes
- CNC Machining
- MIG/TIG Welding AWS CERTIFIED
- Spot Welders AWS D17.2 / MIL-W-6858
- Painting
- Stroke Sanding
- Assembly Area
- Kitting
 
Company ID: 106382 - Click Here for Full Details
Product Lines:
Laser Cutting of Steel, Aluminum, and Stainless
CNC Machining 3 Axis Mill and 2 Axis Lathe
Fabrication and Welding Including Aluminum Welding and Stainless.
Powder Coating. Not Sold as Stand Alone Service.
CNC Punching and Small Part Stamping
PEM Inserts, Custom Control Enclosures 
 
Target Markets:
We Typically Sell to Niche Manufacturers with sales in the $10 million to $100 million Range. Robot Manufacturers, Agricultural Equipment Manufacturing, Tech Companies, Firms Specializing in Long Term Healthcare Products are all ideal. 
 
Sales Opportunity:
We have the capitol equipment in place to absorb a $2 million sales increase. Over ninety % of our clients are on the tread mill where they repeat the same order every 1 to 6 months. This will generate residual revenue with minimal effort. We target clients who can buy at least 6 figures a year in our services.
 
Company ID: 97614 - Click Here for Full Details
Product Lines:
Corrosion Resistant Coatings for Wall, Ceiling, and Floor Systems.

Products are FDA Compliant as well as USDA for Intermittent Food Contact.We have been in Business for 44 years with Current Management. We also Offer a Broad Line of Coatings for Chemical Process Industry. 
 
Target Markets:
Chemical Process and Food & Beverage Industries. 
 
Sales Opportunity:
We supply District Managers who work with several regional Reps as needed to help in technical calls and presentations. Our field installation techs work with the local contractor initially to train and help with the various systems. The owner of our company has 49 years of experience and is a chemist by training does all the Lunch and Learns for A&E firms.
 
Company ID: 51211 - Click Here for Full Details
Product Lines:
• Selling to industries or accounts that use wide format 24” – 120” CAD or Graphic printers manufactured by HP, OCE, Ricoh, Mimaki, Seiko, Canon, Xerox.
sales of supplies and equipment such media, toners, or cartridges. 
 
Target Markets:
Archtitects, GIS mapping companies, Engineering firms, Utility companies, federal, state, county, city govts, Sign & Banner shops, universities and colleges, contruction and surveying companies, plus over 80 other industries that do design and printing.

All areas open except Colorado. 
 
Sales Opportunity:
• Are you looking for additional revenue opportunities
• Selling to industries or accounts that use wide format 24” – 120” CAD or Graphic printers manufactured by HP, OCE, Ricoh, Mimaki, Seiko, Canon, Xerox.
• Would like additional income resulting from the sale of supplies and equipment such media, toners, or cartridges.

Our independent representatives enjoy:
• An exclusive geographical territory
• Email, telemarketing, and personal visit campaigns to close more business for you and us.
• Ongoing income from all accounts that order supplies and equipment within the assigned territory
• Working with a knowledgeable and experienced sales force that can help you develop a better revenue stream than you currently enjoy and provide your customers with unsurpassed customer service
• Over 10,000 products we can offer your customers
If you are interested, please contact me via email at your earliest convenience.
 
Company ID: 113921 - Click Here for Full DetailsNew Profile
Product Lines:
Crude Oil from Pyrolisis
Tire Char 
 
Target Markets:
Chemical Companies, Oil Refineries, etc. 
 
Sales Opportunity:
We are an experienced engineering firm with new products yearly. Over the past 4 years we have been developing a method of pyrolisis that can create up to 300 gallons of crude oil an hour and 400+ lbs of carbon char. Our feedstocks include waste tires, waste plastic, waste foods, etc. Our machine is in operation and 3rd party testing is underway. We are looking for experienced people in the field that can help us find customers so that we can start producing product to their specifications.
 
Company ID: 113872 - Click Here for Full DetailsNew Profile
Product Lines:
Thermal Oxidizers (Recuperative & Regenerative); Catalytic Oxidizers; Fiberbed Filter Mist Collectors. 
 
Target Markets:
Asphalt Roofing & Shingle Manufacturing, Asphalt Tank Vents, Textile Manufacturing, Pharmaceutical Plants, Oil & Gas, Food Processing, Bread Processing, Chocolate Manufacturing, Vinyl Coating, etc. Basically, Manufacturing Plants that Require Air Pollution Control Equipment in their Processes. 
 
Sales Opportunity:
Our company prides itself in the quality and services of our products. We challenge you to find any of our customers that are unhappy with our equipment or services. We pride ourselves in the personal service each and every one of our customers receives.

Our ability to supply multiple air pollution control technologies, such as thermal oxidizers and catalytic oxidizers (both recuperative & regenerative), afterburners, coalescing fiber bed filter mist collector systems, pre-filters, and secondary heat recovery systems puts us in a position to select the correct technology to fit your project needs. Prospective customers can expect an unbiased equipment selection based on the destruction requirements, efficiency needs, and process parameters.
 
Company ID: 113856 - Click Here for Full Details
Product Lines:
Focus on Mechanical Constructing & Technologies, and Engineering Services.

Engineering: Civil & Structural, Mechanical, Electrical, I&C/Heat Exchanger, Piping, Hydraulic. Mechanical: Precision Welding. ASME Section IX, S/U/R/PP Stamps. 1,000+ Welders, 150+ Machinists, Union + Merit Shops. 
 
Target Markets:
Seeking Reps for Oil & Gas (including Midstream, Chemical/Petrochem, Refining). Sales Outreach to Energy, Pipeline, and Chemical Corporations (e.g., Chevron, Shell, Williams), as well as Constructors/Contractors that Build their Infrastructures (Flour, Bechtel, Precision Pipeline). 
 
Sales Opportunity:
Rarely does a new entrant into the vast energy, petroleum, pipeline sectors bring the reputation and renown of a company like ours - and we're combining the great assets and heritages of these iconic American industrial giants for solutions that we believed can be transformative when applied here.

Reps will be supported by in-house account teams that focus on the power generation markets where our nuclear power solutions have long been in place. Household names like Duke Energy, PG&E, Dominion Energy, DTE and AEP, PSEG and Excelon all have both electric power divisions as well as substantial natural gas services businesses.

Our company has strong, decades-long relationships with these and many other accounts. We need reps with local and plant-level relationships to help us expand our business to include the natural gas, oil, pipeline, petrochemical and refining activities within these accounts.

Competitive commission with exceptional sales support and training. Terrific corporate culture backed by unmatched industry awareness and reputation.
 
Company ID: 113834 - Click Here for Full Details
Product Lines:
EPA Registered Antimicrobial Biocides, Cleaning Chemicals, Agricultural Chemicals, Novel Poultry Feed Additives, Water Treatment Chemicals, Environmental Remediation Chemicals, Friction Reducer Emulsions, Friction Reducer Powders, Cross Linkers, Scale Inhibitors. 
 
Target Markets:
Oil and Gas, Hydraulic Fracturing, Water Treatment, Agriculture, Chemicals Distributors, Cooling Towers, Drip Irrigation Systems, Pulp & Paper, HVAC Wholesale Distributors, Power Stations, Food and Beverage, Breweries, Chemical Production and Distribution, Hydroponic Facilities, Aquaculture. 
 
Sales Opportunity:
We're a venture-backed startup up that has invented a suite of new processes to make multiple oil & gas chemicals. We also have significant operations abroad so we can source many chemicals extremely cheaply to sell into the US markets. We have multiple EPA registered antimicrobial biocides as well as channel partnerships with BASF, Dow, Stepan and others. Our team has over 35 years in chemicals distribution and sold our last chemicals venture to DuPont.
 
Company ID: 113442 - Click Here for Full Details
Product Lines:
Custom Electrical enclosures 
 
Target Markets:
OEM'S 
 
Sales Opportunity:
Looking for reps nationwide to rep our custom enclosure line. Excellent commission structure. We build a high quality enclosures for companies with on going product lines.
 
Company ID: 113290 - Click Here for Full Details
Product Lines:
Silicone OEM Components: Keypads, Sealing, Gasket, Tubing, etc. 
 
Target Markets:
Medical, Aviation, Aerospace, Military, Electronic Devices, EMS, etc. 
 
Sales Opportunity:
We are looking for an experienced rep in mechanical components, especially in Medical, aerospace, or aviation. Anyone with the qualification, please feel free to submit a sales inquiry to us soon.
 
Company ID: 113367 - Click Here for Full Details
Product Lines:
Expansion Joints Used at Power Plants, Paper Mills, Steel Mills, Oil & Gas, Processing, and other industries.
Rubber
Metal
Fabric
Bellows
Related Field Services (Remove, Repair, Replace)
Upgrading of Original Expansion Joints 
 
Target Markets:
Power Plants
Steel Mills
Paper Mills
Chemical Plants
Process Plants (Glass, Food, others) 
 
Sales Opportunity:
Where the OEM & competitors are happy to give a year and a day warranties, we manufacture joints to provide solutions, stand up to their harsh environment and last much longer. We manufacture in-kind and upgraded joints out of our factories in North Carolina & Germany as well as provide the related field services.
 
Company ID: 113087 - Click Here for Full Details
Product Lines:
Fishing Equipment
Outdoor Equipment 
 
Target Markets:
Fishing Stores
Outdoor Stores 
 
Sales Opportunity:
Opportunity to use sales and sales management experience to increase both distribution and sales. Currently located in one of the most populated areas of Canada with lots of fishing and outdoor enthusiasts.
 
Company ID: 112969 - Click Here for Full Details
Product Lines:
Roofing Underlayment, Housing Wrap, Woven Fabrics Used in Construction. 
 
Target Markets:
Roofing Supply Distributors, Building Supply Distributors, Large End-Users, Branded Companies looking for Suppliers. 
 
Sales Opportunity:
We are one of the largest textile woven fabric companies in the world. We are looking for outstanding reps to sell our products into the roofing/building supply markets. Our products have many uses and several applications. As well we are looking for reps that can sell our product into larger branded manufacturers looking for a private label.
 
Company ID: 112856 - Click Here for Full Details
Product Lines:
Dewatering Decanter Centrifuges. 
 
Target Markets:
All Industrial Plants - Coal Fired Power Plants, Rendering, Chemical, Coal Mines. 
 
Sales Opportunity:
Most industrial applications require dewatering of solids, recovery of beneficial products or separation of different liquids or solids. Opportunities include: Clean coal, protein recovery, dewater sludge, process recovery, oil recycle, are all good applications.
 
Company ID: 70656 - Click Here for Full Details
Product Lines:
Industrial Centrifuges and Filters.

We are a Chinese Chemical Processing Equipment Manufacturing Company. Specializing in Separation Machinery, including Centrifuges and Filters. The company headquarters is based in Shanghai, China. 
 
Target Markets:
Fine & Bulk Chemicals, Pharmaceuticals, Sugar Refining, Food, and Agricultural Industrial. 
 
Sales Opportunity:
We are now seeking commission-based sales agents with experience at selling industrial equipment. Our main products are Industrial Centrifuges and Filters. Such as Pusher Centrifuges, Decanter Centrifuges, Top-Suspended Peeler Centrifuges, Horizontal Peeler Centrifuges, Vacuum Drum Filters. Our company was established in 1958 and a leader in China in the centrifuge and filter fields. Submit your sales inquiry for more info.
 
Company ID: 112648 - Click Here for Full Details
Product Lines:
Our Company Manufacturers Non-Metallic Gaskets and Products: Neoprene Sponge, Neoprene/EPDM/SBR Sponge Blend, EPDM, PVC, PVC-NBR, Silicone, Viton® Sponge, Open Cell Sponge, Natural Open Cell Sponge, Open Cell Foams, Filter Foam, Convoluted Foam, XLPE, Volara®, Poron® Foam, Ensolite® Foam, Silicone, Acoustic. 
 
Target Markets:
Industries:
HVAC
Electrical/Lights
Power Generation
Transportation
Acoutics
Appliance & Consumer Electronics
Construction/Windows/Doors
Medical
Advertisers, Movies, Television 
 
Sales Opportunity:
Here is a great opportunity to work with an established company and help us grow to the next level. We are able to expand and use more of our capacity to service more customers. We have several machines that were made in-house and able to modify to customers demands. Our team has strong technical knowledge and because we service so many industries, there are always opportunities. We just don't have the sales reps to reach all these markets yet.
 
Company ID: 112644 - Click Here for Full Details
Product Lines:
Air Purification/Sanitization Equipment
Odor Removal Equipment 
 
Target Markets:
Large Production Cannabis Growers. 
 
Sales Opportunity:
We provide a full product line that uses our proprietary technology to protect large cannabis cultivators from the problems associated with microbial and pathogens in their indoor grow and greenhouse environments. This proven technology has been installed in over 5 million sq. ft. of cannabis facilities throughout the USA and Canada. It helps cultivators grow clean medical cannabis minimizing pathogen CFU counts to help them pass regulations.

Used by many of the largest Canadian Growers, helping them pass the strictest regulations in the world. Looking for Representation/Distributors in Australia, Europe, Israel, South America, and other large markets. We will work with the right individual/company to establish terms for a win/win relationship. Please submit a sales inquiry to learn more.
 
Company ID: 112573 - Click Here for Full Details
Product Lines:
Vitamins, Diet Suplements, Medical Equitment, HVAC Systems, Healthcare Products, Beauty Supplies, Hardware, Electrical, Solar Products, Dental Equipment, Electronics, Waste Equipment or/and Trucks, Smart Locks for Hotels, Phone Technology, Buss Wi-Fi Systems, any kind of Trouble Shooting Equipment. 
 
Target Markets:
Central America, Mexico, Central, South America, all Latino America. 
 
Sales Opportunity:
Latin American grew, and goes on process of modernize, development of the past decade, they have needs! And re economy goes better and better, why do no take the opportunity.
 
Company ID: 112285 - Click Here for Full Details
Product Lines:
Industrial Gaskets and Gasket Materials. 
 
Target Markets:
Gasket Fabricators and Supply Stores. 
 
Sales Opportunity:
We have two very unique products we are trying to distribute nationwide.

Expanded PTFE - there are only 4 producers in the world of notoriety. Our material is the largest sheet produced 59" X 177" (3 times that of the competition) this is fantastic for improved yield of cut gaskets. One the most common size gasket the savings is 8% considering all prices are the same. But they are not.

General Service Gasket Material NBR/Aramid with NSF-61 Certification at general service gasket material pricing. If you understand what this means you are the rep we need.
 
Company ID: 112186 - Click Here for Full Details
Product Lines:
Anti-Pollution Moisturizing Cream
Day and Night Hydrating Foam Cleanser
Aloe Antioxidant Toner - Smooth Skin and Improves the Look of Wrinkles
Skincare Hyaluronate Pristine Serum 
 
Target Markets:
Beauty Speciality Retailers
Lifestyle Retailers
Hotels, Spa Gift Shops
Spas and Beauty Salons
Online Stores 
 
Sales Opportunity:
100% natural face moisturizer and anti-pollution cream with anti-aging benefits. Pollution particle called Particulate matter, also known as particle pollution or PM, is a complex mixture of extremely small particles and liquid droplets. PM2.5 refers to fine PM with a diameter of less than 2.5 micrometers—30 times smaller than the width of a human hair!

As a Canadian brand, we are very proud to introduce the revolutionary skin care product lines to the world that manufactured and developed in Canada. When you apply Anti-Pollution Cream, you are opting for next-level skin protection. What is it that makes our face cream better than all other natural face moisturizers on the market? The answer is simple science, tried and true.

We have an interesting commission structure that can be a great support for our reps. Depend on the reps, we offer 25%-50% commission on gross revenue also we have bonus plan.
 
Company ID: 110968 - Click Here for Full Details
Product Lines:
Air Ventilation Systems, Engineering, Design, and Installation Available by our Company. 
 
Target Markets:
Paper and Pulp. 
 
Sales Opportunity:
Rep agency needed for our company. Tremendous opportunity to Rep an industry leader in the Paper and Pulp market. Engineering, Design, and Installation services are available through our company.
 
Company ID: 112071 - Click Here for Full Details
Product Lines:
Steel Fabricating Services: Cutting, Press Brake Forming, Machining, Welding, etc. 
 
Target Markets:
OEMs in many Different Industries: Mining, Bridge Construction, Construction Equipment (Cranes, Bull Dozers, Front-End Loaders, etc. Oil and Gas, Clean Energy. 
 
Sales Opportunity:
We are a 78 year old family business that is currently in its 4th generation of leadership. We serve the Heavy Industrial, Energy, and Defense markets with precision metal fabrications in all sorts of size and scope. We are a build to print shop but we offer our customers input on their designs. We are looking for someone to represent our Wisconsin division that has experience serving OEMs that would use our fabricating services in that region.
 
Company ID: 112046 - Click Here for Full Details
Product Lines:
Our product lines include: Industrial Line Cleaning Solutions; Pulsed Light Technology, Conveyor Lubrication; Dosing; Chemical Storage, Water Treatment, Plant Engineering; Automation & Control; Control Cabinet Design/Build; Piping Design/Build; Tank & Container Cleaning; and Filter Beads. 
 
Target Markets:
Our target market is small, medium and large North American food and beverage processors and producers. 
 
Sales Opportunity:
We are looking for the ideal candidate for our new subsidiary company ‘North America’ to join our team for the position of Key Account Manager.

Reporting to the Global Sales Director, the Key Account Manager will be responsible for:
- Business development with existing and potential North American customers in our new subsidiary company
- Maintain and grow an active customer base of OEM’s and end customers
- Analyze customers' businesses and seek new business opportunities in key success areas and needs
- Manage pricing to assigned accounts and impulses for product innovations
- Provide technical support to assigned customers as required / with the collaboration with our German project department
- Manage and take over responsibility of the new subsidiary and its development
- Plan and communicate the business building activities and direction of the new subsidiary to senior management
- Build and follow the business plan with a view to meet or exceed goals /objectives

Requirements
- Commercial or technical studies for chemical and technical questions, professional experience or completed a post-secondary education
- Results and solutions oriented
- Excellent verbal and written communication and analytical skills
- Experienced in sales of equipment for the food and beverage industry
- Expertise to establish a climate of trust with customer decision makers
- Strong presentation & computer skills
- Travel required ~3 days a week
 
Company ID: 112021 - Click Here for Full Details
Product Lines:
Ours is a Transformer Manufacturing Company in the USA.

We Manufacture Standard and Custom Designed Transformers like Control, Magnet Coils, Auto, Current, Power, and many More Types of Single and Three Phase Transformers.
• Custom Design Transformer
• Furnace Transformers 
 
Target Markets:
Electrical Control Panel Manufacturers
Electronics Manufacturers
Control System Users. 
 
Sales Opportunity:
Ours is a transformer manufacturing company in the USA. We manufacture standard and custom designed transformers like control, auto, current, power and many more types of single and three phase transformers using our experienced staff, latest technology, expertise in designing, manufacturing, testing, delivering, quality control, and great customer service. Product is made in USA with very very comparative price so it's good opportunity with very large market specially new technology innovation require control system across world.
 
Company ID: 111385 - Click Here for Full Details
Product Lines:
Multiple Types of Business Financing.

You Refer Them, Corporate Sells Them, and Does the Paperwork. When the Financing is Approved and Completed the Referring Agent Earns the Commission. 
 
Target Markets:
Small and Medium Sized Businesses of All Types Throughout the USA. 
 
Sales Opportunity:
Reps are in constant contact with their customers and likely are the first to know about a company's need for financing. Whether it is to buy more product, expand brick and mortar, increase hiring, etc. Use this knowledge to refer them for financing of all types and for any legal purpose. Over $5 million paid in commissions. Offering unsecured credit lines, equipment leasing and purchase funding, term loans, commercial real estate loans, are some of the options available.
 
Company ID: 111604 - Click Here for Full Details
Product Lines:
PLCs, Touch Screens, Contactors, Relays, Overloads, Circuit Breakers, Mini-Circuit Breakers, Manual Motor Protectors, VFDs, and Soft Starters.

These are Low Voltage Products. Medium Voltage VFDs and Medium Voltage Soft Starters. Complete Custom Control Panels and Packaged Pump Panels. 
 
Target Markets:
Oil and Gas, Plastic OEMs, Marine, Machinery Builders, Panel Builders, Irrigation, Anything that has to do with Pumping Fluids or Solids. 
 
Sales Opportunity:
We pay you a handsome commission and give you a defined territory, plus we will give you accounts to start your business. We offer sales product training, sales help, plus we service what we/you sell.
 
Company ID: 111568 - Click Here for Full Details
Product Lines:
High Quality VFFS Equipment.

Stand up Pack with a Tin Tie re-closable feature
Vacuum Seal Equipment (Coffee Packs that are on Cruise Lines).
Quad Seal Stand up Pouches
Oval bottom Pouches with Zippers made from roll stock 
 
Target Markets:
Bakery, Snacks, Coffee, Tea, Flour, Confectionary, Sugar, Pet Food, Cat Food, Bird Seed.
Dry Products
Household Detergents-Dishwasher & Laundry 
 
Sales Opportunity:
53 year old Business with 300+ machines placed in the USA is looking for quality packaging machinery representation.

Great reputation and fair policies for commission payments.
 
Company ID: 110644 - Click Here for Full Details
Product Lines:
Erosion Control Products Control the Amount of Soil Erosion at/or Near Construction and Building Sites.

SWPPP Products Provide Protection of Storm Water Discharge from Construction Sites. 
 
Target Markets:
Las Vegas area. 
 
Sales Opportunity:
Tremendous opportunity to assist construction and road work locations with products to keep them compliant with erosion control and storm water pollution prevention. High volume sales potential given all the construction that is currently going on and anticipated to happen in the Las Vegas area.
 
Company ID: 108589 - Click Here for Full Details
Product Lines:
Our Company Provides Custom Solutions like Rack-Mount PDUs, Modular UPS Systems, Power Metering, Power Distribution, Data Concentrators, Rectifiers, Inverters, Frequency Converters, Remote Power Monitoring, Power Monitoring, and Control.

All of our Power Electronics Solutions are Customer Specified. 
 
Target Markets:
Data Centers, Military, Rail, Solar & Wind, and Infrastructure Verticals. 
 
Sales Opportunity:
We are adaptable to your customers' application, environment, and testing needs. Nimble and quick from design to engineering to production and delivery. Service and support thru entire process. Quality derived from extensive experience, pride, and commitment to genuine care in everything we do. Training on our product offering via video conferencing. Attractive commission plan.
 
Company ID: 111200 - Click Here for Full Details
Product Lines:
Heavy Duty Industrial & Commercial Filtration Products:
- Simplex Strainers
- Duplex Strainers
- Seaview Strainers
- Transfer Valves
- Direct Drive Pumps
- Belt Drive Pumps 
 
Target Markets:
Consumers, Government Agencies, Anyone Interested 
 
Sales Opportunity:
Our company is a well-established engineering and manufacturing firm specializing in simplex and duplex strainers, filters, and transfer valves for pipeline service.

Our products are generally applicable to all phases of liquid handling service. For example, cast iron and steel pipeline strainers and filters are commonly used on fuel oil, lubrication oil, and hydraulic oil. Cooling water and petrochemical applications often require bronze or stainless steel units.

We offer a full range of port configurations, including NPT threaded, socket weld, and flanged connections with pressure ratings from suction service up to class 1,500 and higher. Duplex models are especially important where continuous flow must be maintained with no shut down during cleaning of clogged strainer elements.

Our customers encompass a wide variety of markets in the fuel oil, petrochemical, facilities construction, marine, paper, and food processing sectors. Emphasis is on original equipment manufacturers (OEMs) who utilize our products in their systems.
 
Company ID: 111195 - Click Here for Full Details
Product Lines:
Effective Indoor Air Quality Solutions.

Using Plasma, our Units Reduce the Chance of Airborne Infection Transmission, Reduce Allergens and Odors. Easy to Install. Requires Little Maintenance. Quiet, can be Used in Offices or Bedrooms. All that is Needed is a Standard Electrical Wall Outlet. 
 
Target Markets:
We are Focused on Developing and Executing Growth in New Verticals Focusing in Improving Indoor Air Quality. Customers who have a Need to Reduce Airborne Contaminants such as Bacteria, Viruses, Mold, Dust, Pollen, Allergens, and Odors. Examples: Veterinary Clinics, Pet Stores, Hair, and Nail Salons. 
 
Sales Opportunity:
This opportunity offers maximum upside for an experienced sales professional to sell a new, innovative product to their existing customer base and prospects. The sales rep will use their exceptional communication skills to learn about the customer, assess the need, provide the right solution and submit orders.

We understand that superior customer interactions drive our growth and our commissions are aligned with that philosophy. We invest in our team and offer comprehensive training and support to ensure success. Our products are “plug-n-play”, proven and easy to maintain. Customers praise our solution and NASA has validated it.
 
Company ID: 10042 - Click Here for Full Details
Product Lines:
Filter Presses and Ancillary Equipment including: Fully Automated and Unmanned Filter Presses with Plates to 2Mx2M, Automatic Filter Cloth Washing Systems, Polymer Make Up and Chemical Dosing Systems, Filter Plates (Membrane, Recessed Chamber, Plate and Frame), Hydraulic Ram Pumps. 
 
Target Markets:
Major Process Industries, New Mines and Mineral Processing Plants, Water and Wastewater Treatment Plants, Major Engineering, Procurement and Construction Companies Serving these Markets. 
 
Sales Opportunity:
Our equipment features state-of-the-art technology, is of the highest quality and carries an industry-leading warranty. We work extremely hard at building fine customer relationships, by meeting and surpassing our customers' expectations.

We are completely dedicated to building a strong sales team of independent sales reps with no house accounts. We offer highest possible production rates, based on world-leading technology and meticulous attention to detail, all at very competitive prices. We provide full ongoing technical support and training to sales reps, with fully-illustrated proposals customized for each sales rep organization.

And we are committed to expanding our web-based marketing advertizing and promotion to improve company recognition and generate sales leads for our reps. We offer a flat 10% commission on all sales.
 
Company ID: 109307 - Click Here for Full Details
Product Lines:
Our Product Line is an Aluminum C-Channel Bracket with has Adjustable Locking Rubber Clamps that is mounted to a Standard Landscapers/Homeowner's Trailers.

The Bracket Allows the End-User to organize hand toys shovels, racks, axes, weedwackers etc. 
 
Target Markets:
Landscaping Supply Dealers, Lawn & Tractor Dealers, Tractor Dealers, Do-IT-Yourself Wholesalers, Golf Courses, Commercial Maintenance Department, Independent Home Supply Wholesalers, Retail Wholesalers, Gardening Centers, etc. 
 
Sales Opportunity:
We currently have the US & Canada areas available that we are looking to fill ASAP. Don't wait you will miss out on a great product line with no competition. You will have total control of setting the pricing for our product line in your territory. A salesman's dream line! Act now before you loss out on a great line to create more revenue for your company & we are paying higher than average commissions plan for all new reps! This will be the best line you've ever had and you will make allot of money!
 
Company ID: 110900 - Click Here for Full Details
Product Lines:
A Line of Bacterial Products for Wastewater Treatment.

We Developed a New Strain of Archaea Bacteria for a Better Bioremediation Efficiency. 
 
Target Markets:
Wastewater Treatment Industry. Municipal, Industrial, Wastewater Treatment Plant Operators. 
 
Sales Opportunity:
If you want to contribute to change the face of this industry. Work with a Company and a product that will bring complete satisfaction to the customer. We support our reps with training, documentation and assistance. We offer a very interesting commission. Our bacterial products are developed with sound and efficient technologies. Our scientists and scientific studies back up our products.
 
Company ID: 110599 - Click Here for Full Details
Product Lines:
Energy Efficiency Innovator seeks HVAC Specialists and others with access to Commercial Buildings & other Large Facilities to Retrofit Small Motors, Fan Blades, etc.

Each Replaced Item Saves Electricity and Money. Savings 100% Quantifiable. Strong ROI. Reduces Monthly Utility Bills 20 - 25%. 
 
Target Markets:
Marketplace virtually unlimited:
Commercial Buildings
Malls
Campuses
Hotels
MUSH (Municipal, University, Schools & Hospitals), etc.

We call on:
Facilities Management
Sustainability Directors
Energy Managers
CFOs & Controllers
Engineering & HVAC People/Vendors 
 
Sales Opportunity:
Retrofitting small motors and fan blades is a concept that is sold just like an LED lighting retrofit.

Small motors and fan blades are a high-value target for reduced consumption and lower electricity bills. They spin constantly, and consume power that could just as easily be saved.

We have the name recognition, the track record and the voluminous research, product development, measurement, and verification, for prospective customers to know they can be confident in working with us. We meet the numbers offered up in proposals, because we've sweated the details and know our stuff. We have a team that generates the proposals, too.

We have the information, documentation, case studies, etc. to give our sales associates the data they need to close deals. We have an in-house Rebate Department that takes care of a) getting our offerings eligible on the utilities' rebate lists, and b) getting the customers their rebates as promised. Nothing beats a customer that's pleased to see you on a rebate list.

We are looking to put one person in each metropolitan area, and have about 35 cities in mind. (If you are an HVAC vendor or a well connected HVAC person, you may already have the potential customer part of the equation covered. I will work with you on a different equally lucrative direction.)

1099 contractor position. Straight commission plus bonus.
 
Company ID: 110821 - Click Here for Full Details
Product Lines:
Thermal and Biological Oxidizers for Industrial Air Pollution Control Applications. 
 
Target Markets:
Chemical, Petrochemical, Pharmaceutical, Food, Engineered Wood Products. 
 
Sales Opportunity:
Global leader in APC technologies. 60 years in business, headquartered in Pittsburgh, PA. An opportunity to expand existing lines and provide technical options to meet EPA control requirements.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2018
LINKS | SITE MAP | TERMS OF USE