Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
  Lost Password
     HomeFind Sales RepsFind Product LinesSales Opportunities     
\Directory\Industrial\Injection Molding Parts & Supplies
Click on Company ID to View Full Details
Company ID: 28698 - Click Here for Full DetailsUpdated
Product Lines:
US EPA Tested, Award Winning, Value Added Green Product (Conversion Coating). Eliminates Solvent, Acid, Phosphate, Chromate & Blasting from the Metal Surface Preparation Process.

Completely Prepares the Metal Surface for Welding and Finishing. Provides Years of Indoor & Outdoor Rust Protection. 
Target Markets:
Metal Fab, OEM, Car Part Mfg, Machine Shop, Stamping, MRO, High Temp. Coating, Stainless Steel Passivation, Rebar, Industrial Supplier, Painting, Powder Coating, Welding, Injection Molding, Media Blasting, Defense, DOT, Marina, Construction, Utility, Power Plant, Oil & Gas, Mining, Agricultural etc. 
Sales Opportunity:
Looking for Sales Rep for Direct selling and through Distributors in USA and in Overseas countries. Huge market in any industry with no competition. Selling since 1998.

Product developed & Made in USA. Complete "Green Technology & Process". Good Commission rate. Complete Training & Technical Support will be provided along with free Product Sample, Brochure, etc. This is the only Conversion Coating which works on any Ferrous & Non-ferrous metal at room temperature without rinsing. Complete metal surface preparation in one step. Eliminates blasting of new metal before Priming/Painting, High Temperature Paint, Powder coating, etc.

The sales Rep must be familiar with Metal Surface Preparation before Finishing such as Priming/Painting, Powder coating. The product has Zero Waste Disposal. Completely eliminates Rusting & Long-Term Rust Protection problems, Welding & Adhesion failures. Increases weld strength considerably in steel & Anti-spatter. Product performs multiple jobs in one step. Eliminates one or more steps from traditional processes, saving a lot of labor, time & cost. Zero Product Cost after use. No EPA or OSHA regulation. Zero Welding & Zero Paint Adhesion failure since 1998. Zero Re-Work. Indefinite Shelf Life.

Our product is being used by major companies, such as DOT, Military Metal Fab., Aerospace, Automotive Aftermarket, Mining, Boat manufacturers, etc. It has been used by Lockheed Martin, Goodrich Aerospace, Bechtel International, DOT TENN, SpaceX, etc.
Company ID: 112596 - Click Here for Full Details
Product Lines:
Injection Molding of Thermoplastics, 50-400 ton Presses
Mold Making and Design, Complex, Hot Runner, Unscrewing, Prototyping, Full Sampling, and Validation
A Modular Molding System, Pre-Engineered, Rapid Design, Prototyping, SMED, Offer Free Tooling of RM
Extrusion: PETG Tube 
Target Markets:
We are Currently 40% Medical and 40% Automotive with Remainder being a Blend of Industrial, Packaging, and Consumer. Interested in targeting: Medical, Automotive, Industrial, Recreational Vehicle, Boat, Truck, Trailer. 
Sales Opportunity:
PPI is a $6 million in sales company seeking to grow the injection molding sector to more than $10 million while using full tool shop to provide internal service of tooling and repair. Secondly, we seek to grow our modular molding system to a minimum of $2 million in annual sales.

We have attracted many new opportunities by gaining certified quality systems of IATF 16949 in Molding and ISO 9001:2015 in Tooling and Extrusion. Our customer base includes such companies as Smith Medical, Porex Filtration, Big Ass Solutions, Dayton Superior and Sumitomo Riko. We also land customers with the offer of free tooling for the proper volume match. Our company is unique with its supply of modular mold and total tool support of injection molding.

It's a given that we maintain an up to date website and online marketing presence. We maintain sales literature and offer sales and engineering support to our representation.
Company ID: 93059 - Click Here for Full Details
Product Lines:
Multi-Spindle Screw Machine Job Shop.

Will Supply Parts Manufactured from Free Machining Carbon Steels, Alloy Steels, Free Machining Brass and Coppers, 2000 and 6000 Series Aluminum, Free Machining Bronze, some Plastics, 400 and 300 Series Stainless Steel. Low Volume as well as High Volume Runs. 
Target Markets:
We currently sell to the Electronic Connectors Market, Replacement, and OEMs. Automotive Industry. Gas Orifice Markets, Clock and Gauge Pointer Manufacturers, Insert Molding Manufacturers, Valve Manufacturers, Music Instrument Manufacturers, Inserts for Castings, and Hydraulic Industries. 
Sales Opportunity:
We have some coverage in Ohio and PA, but all other states are open. We normally pay a 5% commission with a negotiated rate after sales have reached certain platforms. Each management representative has over 25 years experience in this field.
Company ID: 112311 - Click Here for Full Details
Product Lines:
Chrome Plated Plastics, 2K and 3K Plastic Components, 2K and 3K Component Tooling. 
Target Markets:
Manufacturing, OEMs, Gaming, Heavy Truck, Marine, Lawn Mower, Snowmobile, ATV, Snowblowers. 
Sales Opportunity:
This is a great opportunity to work with a growing solution oriented company. We have a history of supplying the plumbing/home appliance sectors around the world and are looking to expand into new industries within North America. Our commissions rates are outstanding for the rep in any industry we enter. We provide exclusive protection.
Company ID: 65867 - Click Here for Full Details
Product Lines:
Non-Woven Materials including:
Spunbond PP & PET
Chemical Bonded Fabrics
Air Laid and Melt Blown 
Target Markets:
Automotive (Tier 2 Customers - Trim, Headliner, and Seating), Bedding Manufacturers, Furniture Manufacturers
Rubber Molding: Mold Release Fabric/Paper for Compression, Injection, and Transfer Presses
Roofing: Products for Flat Roof & Membranes 
Sales Opportunity:
We are a TS/ISO Certified company that specializes in the converting of Non-Woven Roll goods for various end uses, inclusing automotive, bedding, and furniture. We are capable of all slitting/re-winding and can also perforate most of our products in line.

Our company is looking for sales agents that may be representing other product lines to our target markets, and have a working relationship with their current customer base. Representatives should have the ability to take on a new line and devote the proper time to develop it’s potential, as well as be able to travel in their designated sales territory. This is a commission based position.
Company ID: 107652 - Click Here for Full Details
Product Lines:
We are a Mass Producer of Thermoplastic Parts, Proficient in Profile Extrusion, Injection Molding, and many Value Added Services Applicable to both. 
Target Markets:
Our Largest Markets are Consumer Goods, Residential and Commercial Lighting, Construction, Manufacturing, and Refrigeration to name a few. 
Sales Opportunity:
This is a good opportunity because of the many values we bring to the table; plus our ability to be in on the ground floor regarding a design (40% of our company sales are of proprietary products) makes us even more of an asset to a customer requiring product design support. (not to be confused, however, with a product designer)

The company has been around since 1953 and has weathered many issues that torment American manufacturers. We continue to be diverse and yet still use many of the techniques that got us here and has kept us current. Longevity and continued prosperity are assets companies look to partner up with these days for certain. We are ISO 9000 Certified since 2002.

These aforementioned aspects (longevity, stability, diversity, and constantly reinvention of oneself) plus flexibility and the willingness to explore new markets and/or process trends are competitive advantages for our company, aside from the many processing capabilities we offer.

We support our independent representatives through a strong, mutually beneficial relationship to make it a "win-win" situation through strong marketing processes to promote and generate leads, strong communication and factory support, and the understanding, unlike some, that a heavily compensated independent actually means lucrative sales for the company as a whole. That's our philosophy.

We offer 5% commission, paid in the month following the previous. We have a Memo of Understanding that covers our responsibilities and expectations.
Company ID: 88403 - Click Here for Full Details
Product Lines:
Electronic Components, Electronic Assembly, Electromechanical Assembly, Cables, Injection Mold Tooling, Injection Molding, Metal Fabrication, Metals, Precision Plastics. Ceramic to Metal Components, Particle Accelerators, and Associated Components, Complete Turnkey Assembly of Electronic items. 
Target Markets:
Automotive Manufacturers, Appliance Manufacturers, Aircraft Industry, Entertainment Manufacturers, Arms Manufacturers, Security Industry, Medical Equipment Manufacturers, Power Industries, Applied Research, and so many more. 
Sales Opportunity:
We seek experienced sales reps with a strong following. All areas open. All our products and services are done in our China facilities. Excellent opportunity. Products sell well. Engineering and sales support always available. Multiple sales persons the rep organization a definite plus.
Company ID: 109942 - Click Here for Full Details
Product Lines:
Our Product Range includes Rubber Seals, Gasket, Tubing, Hoses, Die-Cut Gaskets, and Molding Products.

In Addition to Stocked Products we Custom Manufacture Products per our Customer’s Requirements to Meet their Design, Engineering, and Performance Expectations. 
Target Markets:
Typical Accounts using our products include Industrial, Manufacturing, Governmental, Construction, Automotive, Aerospace, Marine, Pharmaceutical, Shipping, and Agriculture. This Wide Customer Base Allows for Stable Earnings and Consistent Growth. 
Sales Opportunity:
We are looking for an independent outside sales representative with experience in selling elastomer extrusion and molding seals, gasket, tube, hose and O rings products to industrial manufacturers, construction industry, Pharmaceuticals, Food and Dairy Industry, Automotive and, Agriculture to name a few.

Ours is not just another rubber company. We are a team of experts who deliver top quality rubber seals, extruded rubber products, molded rubber products, and gaskets. Our team understands the clients’ specific requirements and suggests the best suitable solution to optimize the performance.

Representing our company means:
• A secure and protected territory where individual will be able to grow new accounts
• Reputation of the best products and service in the industry
• Recession resistant products
• High potential of repeat sales

We are a leading manufacturer of Rubber Extrusion, Molding, and the Die-Cut Fabrication of a vast range of high-quality, competitively priced rubber parts and components for the industrial markets. Our extensive product line consists of extruded rubber seals, gasket, rubber sheet, O-rings, rubber tubing, molded rubber products and more. Our company maintains an extensive inventory of rubber products having different shapes, sizes, and materials to meet the diverse requirements of our customers and solve our customer’s toughest sealing challenges.
Company ID: 108041 - Click Here for Full Details
Product Lines:
Precision Industrial Temperature Sensors and Accessories including Thermocouples, RTDs, Thermowells, Protection Tubes, Wire, Fittings, Indicators, Controllers, and Components. 
Target Markets:
Power Generation
Oil & Gas
Food & Beverage
Material Processing
Sales Opportunity:
Our products are used in almost every industry around the world. Recurring sales due to consumable nature of our products. Technical Expertise and excellent service focusing on guiding our Reps with all inquiries, ultimately providing success to both parties. Growing company seeking a partner to grow with.
Company ID: 40814 - Click Here for Full Details
Product Lines:
We are a China based company who has a Proven Track Record throughout the World.

1. Mold Making, Plastic Molding, & Metal Stamping.
2. PCB Design Engineering, PCB Layout, Rapid Prototyping. PCB Assembly Capabilities include SMT (Surface Mount Technology) & Mixed Technology (SMT + PTH). 
Target Markets:
Companies that are looking for Electronic Products, Mold and Molding, Casting Parts that offer Great Quality, Pricing and Customer Satisfaction. Our target customers are OEM Manufacturers Seeking Support in Product Development and Manufacture to Improve their Product Systems. 
Sales Opportunity:
Excellent Commission Structure and Protected Territories for Reps. Our company is very stable. We are also looking for reps Worldwide. Submit your sales inquiry for more info.
Company ID: 97820 - Click Here for Full Details
Product Lines:
Custom Cable Assemblies & Wire Harnesses
Electro-Mechanical Assemblies
Overmolding Wire Assemblies
Metal Working 
Target Markets:
Automation Industry
Automotive Diagnostic Equipment & Services
Automotive/Truck - Fleet Management
Gaming/Vending Machines Wire Harness
Electronic Contract Manufacturer
ODM Manufacturer 
Sales Opportunity:
We commenced our business in 1983, based on the manufacture of custom cable assemblies, and since then have been dedicated to upgrading manufacturing facilities and product range, together with the building of long term supplier/customer relationships.

In conjunction with the cable business we have integrated the manufacture of machined and/or stamped metal hardware, plastic injection parts, connectors, etc. to produce completed electro-mechanical assemblies. Through this process we offer extensive options to meet with customers requirements. This function enhances our range of services to provide our customers with the best solutions required by various industries.

We are seeking career-minded Sales Reps wanting sustainable relationship to promote our products and services in the North america market. Several territories are available. Reasonable allowance and generous commissions are open for discussion.
Company ID: 90862 - Click Here for Full Details
Product Lines:
Prototype/Production of Precision Stampings, Conventional and Insert Moldings and Assembly of Sub-Components to Complete Medical and Automotive Devices.
Class 7 Cleanroom Manufacturing Area
Certified Compliant Pin
Single QMS System Covering our ISO 9001:2008, ISO 13485 and TS 16949 Certs 
Target Markets:
Headquartered in Emigsville, PA, with a Duplicate Facility in Hermosillo, Sonora, MX, we Service the Medical, Automotive, and Telecommunication's Markets. 
Sales Opportunity:
We are actively searching for an aggressive rep. or rep. group to expand our customer base across the U.S. and Mexico territories and offer extensive support.
Company ID: 89220 - Click Here for Full Details
Product Lines:
Our Fluidized Bath Thermal Cleaning Systems Quickly Removes Plastic, Resins, Paint, and Adhesives from Tooling, Parts, and Hardware. Fast ROI and Safer than Using Ovens, Manual Cleaning, and Torching.

Great for General Temperature Apps such as Calibration, Annealing, Thermal Analysis, & others. 
Target Markets:
Plastic Extrusion, Injection Molding, Medical Tubing & Devices, Plastics, Chemicals, Fibers, Wire & Cable, Hose & Pipe, Packaging & Film, Paint & Power Coating, Manufacturing & Extrusion Engineers, Plant Managers, Tool Room Managers, Technicians, Maintenance Personnel, Production Engineering. 
Sales Opportunity:
Reps Must Have Plastic Extrusion, Injection Molding Background, or Experience!

Our systems have a small footprint. They are easier to operate, safer, and faster than competing methods. We provide all technical support, literature, free sample cleanings, and YouTube video showing the cleaning process. We have 25 years of experience in the industry including this proven application.

This is a good prospecting opportunity for a rep who calls on a lot of accounts weekly. In short, we want someone who can simply hand out our brochure and find out how the customer is currently cleaning their tooling and hardware. The systems are priced from $7K to $40K with a commission structure between 10% and 15%. Submit a sales inquiry to us today to discuss our products and the application further.
Company ID: 88445 - Click Here for Full Details
Product Lines:
We Manufacturer Compression, Extension, Torsion, Double Torsion Springs as well as Wire Forms and Flat Springs. 
Target Markets:
Our markets include Automotive, Agricultural, Builders Hardware, Recreation, Electrical, Medical, and other variuos OEM's and Distributors. Calling on both Purchaseing Personnel and Engineers. 
Sales Opportunity:
This is an opportuntiy to increase your sales with existing customers and within your territory by selling a related product to your current lines. Ours is one of only 10 spring companies in the U.S. to be registered to ISO 9001 with design. We are aggressive and very competitive. We pay an industry standard 5% commission.
Company ID: 64844 - Click Here for Full Details
Product Lines:
Plastic Injection Molding.

Thermoplastic Molded Products for all Industries, Optics and Clear Molded Parts, High Strength Mechanical Parts, High Tolerence Parts, and Insert Molding. In-House Mold Making Capabilities. 
Target Markets:
Electronic, Sensors, Optical, Material Handling, Automotive,Heavy Equipment, Medical, Dental, Fire Protection, Safety, General Industry. 
Sales Opportunity:
We are a high quality thermoplastic injection molder that has a great reputation for Servicing our customers. We have been in business for 27 years and have experienced a good growth track record. We have Openings for Reps that would like to work directly with the owners of the company.

Our Company is ISO9001:2008 Certified.
Company ID: 77328 - Click Here for Full Details
Product Lines:
CNC Machining Components, Stamping & Fine Blanking, Screw Machine Parts, All Type of Castings, Powder Metallurgy Parts, Plastics Injection Moulding Parts, Excellent Manufacturing Facilities, Very Competitive Price. 
Target Markets:
OEM’s, Auto Parts Manufacturer, Wholesale Distributors, Machine Shops, Construction Industry, Contractors, Power Coating & Paint Facilities, Electrical, Electornics, Medical and Aeronautics Components and Equipments Industries. 
Sales Opportunity:
We have very wide range of International and Local Qualified Supplier. Those are ISO and TS Certified. We are dealing with suppliers from all over the world. We can offer very competitive price with very good quality. We offer standard commission. We also offer Special incentives for target sales.

***Special Commission Package for 2013***

This is for calendar year starting 1st Jan 2013 to 31 Dec 2013:
$0 to $250,000 6%
$251,000 to $500,000 7%
$500,001 to $1,500,000 8%
Anything above the $1,500,000 8%+2% bonus!!
Company ID: 47075 - Click Here for Full Details
Product Lines:
The POWER OF ONE-STOP SOLUTION. Quick Turn Printed Circuit Boards and PCB Assembly Services - Quick Turn High Mix Low Cost PCB Assembly. Prototype PCB Same-Day & Production in 7-10 days. Offshore and In-House Manufacturing at Competitive Prices. ISO/ITAR Certified. 
Target Markets:
Serving OEM, Aerospace, Medical, Automotive, Telecommunications, Computers, Audio, Video Products, Industrial, Power Supplies, Gas/Oil Industy, Sensors and more.

Special Materials: - FR406, Getek, SOLA, Rogers, Polyimide, Teflon, Taconic, JP Copper Clad, BT, Ceramic. 
Sales Opportunity:
Precision Technologies, Inc is a team of experienced professionals with over 35 years of accumulated experience in Printed Circuit Board (PCB) fabrication and a full service contract manufacturing.

From quotations to delivery, our value added services are fast, competitive and committed to total customer satisfaction. The various types of fabrication include Single Sided Up to 40 Layers, Lead-free finishes to High TG exotic materials.

The final assembly techniques and fabrication methods are all considered up front and so our efforts too are successful in providing a quality based product every time. With an objective to satisfy customers and build long term relations, we have proved our reliability and grown over the years along with our entire customer base. We have best On-time shipping record and deliver the order early in many cases.

Compensation: 10% commission on Quick turn prototype orders and 5% on production quantity. All negotiable, so submit a sales inquiry to us for complete details.
Company ID: 82254 - Click Here for Full Details
Product Lines:
Our company Manufactures On-Site Portable Machining, Bolting, Tensioning Equimpent for the Power and Gas Industry. Sales, Rental, and Service. Need focus on driving products and services into all industrial accounts, such as Power Plants, Refineries, Mills, Mining, Chemical, Processing, and Food. 
Target Markets:
Power Plants, Chemical, Paper, Processing Heavy Construction, Mining. 
Sales Opportunity:
Sell world leading on-site machining, split frame clamshells for ID/OD pipe preps, boring bars, keyway cutters, CNC (x,y,Z) boring and threading. Bolting equimpent (Hydratight Brand) from 300 Ft.lbs torque to 37,000. Nut splitters, flange break-out and make up. sell portable onsite heat treating, pre/post weld.
Company ID: 78253 - Click Here for Full Details
Product Lines:
1. Custom Injection Molding - Small to Medium Sized Parts, Emphasis on Closures, Lighting, Construction, Consumer Products.
2. Custom Blow Molding - Up to 1 Gallon.
3. Proprietary Containers: 1 Gallon F-Style, 3000ml Square, 1 Quart Oil.
4. Proprietary Butyl Based, Sound & Vibration Damping Sheets. 
Target Markets:
- Industrial
- Chemical
- Fillers (Bottles, Closures)
- Electronics, Communications
- Automotive Tier Suppliers and Aftermarket
- Appliance 
Sales Opportunity:
Injection molding - versatile capabilities to mold simple or complex thermoplastic parts, low to medium volume, assembly capabilites. Seeking custom molding jobs.

Blow molding - versatile in HDPE and PP containers or hollow parts, assembly. proprietary bottles (1 qt oil, 3000ml square, 1 gal F style) for industrial chemical and hospital supply applications. Seeking proprietary product customers and custom molding business.

Sound damper - unique product for sound or vibration control in any type of structure. Seeking customers in automotive, consumer electronics, appliance, business machine, etc.

Commission structure up to 8% on net sales with volume incentives commensurate with representative expertise, realistic opportunities and time to market.
Company ID: 112411 - Click Here for Full Details
Product Lines:
We Manufacture Production, Prototype, and Low Volume Molds for Press Tonnages from 300T to 4,000T.

Specialists in  Plastic Injection Molds and Fixtures for the Automotive Sector. Fascias, Fender Protectors, Grained Interior Parts, HVAC, Structural Parts, 2K + 3K Multi-Shot, Painted, and Chromed Parts. 
Target Markets:
Our Markets are Primarily NA Automotive Plastic Part Manufacturers. We target OEMs, Tier 1s, and Tier 2s, and Perform DFM, Mold Flows and Product Design Modifications to make Durable Production Systems. We Provide Design Assistance, 3D Printed/Rapid Prototypes, Soft Tooling, and High Volume Molds. 
Sales Opportunity:
Our company is a Windsor based Turn-Key supplier of high quality low cost plastic injection molds and Fixtures. We have Combined our experienced North American engineering and management capabilities with carefully selected powerful low cost manufacturing partners for molds and fixtures in China. We have several Joint Venture partners in China whom are ISO certified and GM approved.

We exclusively represent this tooling capacity in the USA, Canada and Mexico. Along with our NA Team, we have full time program managers in China that were trained in Canada with our systems and standards. We have extensive experience in the development, Qualification, importation, servicing and modifying of low cost tooling.

We have the resources in Mexico, Canada & the USA to finish and qualify the tooling, to perform local engineering changes and to carry out all warranty work. Our company is looking for partners to join our sales force to sell our full service seamless approach.

We join the solid North American Engineering and Quality systems, a network of program management, service and qualification personal with our powerful Low cost experienced Chinese manufacturing partners for Molds and Fixtures. We deliver the highest of quality, reliability and durability into the NA market with costs of about 30% under the traditional NA Tooling prices. We join the Canadian mold making expertise with China Manufacturing and Generate highly competitive quality tooling systems.
Company ID: 112317 - Click Here for Full Details
Product Lines:
1. Raw Materials - Metal Powders, Natural Graphite Flakes, Graphite Foil, Expandable Graphite, Graphene, Tungsten Carbide, etc.
2. Lab Equipment - Furnace, Oven, Material Testing Equipment, etc.
3. Machinery - Metal Cutting Machine, Air Compressor, etc. 
Target Markets:
Industrial Manufacturers. 
Sales Opportunity:
All the product have been sourced from China with professional QA/QC from US team. So these products are very competitive in both price and quality, which means that you will have higher commission. You will get professional technical & market support from our team based in Houston, TX.
Company ID: 112251 - Click Here for Full Details
Product Lines:
Ours is a Process that Enhances the Performance of Steel Products.

The Process Greatly Increases Corrosion Resistance and Wear Resistance. The Method of (QPQ) Quench Polish Quench Leaves the Components with a Beautiful Black Finish that is Impervious to Corrosion and Wear. 
Target Markets:
Fluid Power, Automotive, Oil and Gas, Firearms, Medical, Aerospace. 
Sales Opportunity:
We have expanded our successful east coast operation to the west coast (PHX). The operation is fully operational and in need of a motivated sales rep. The position is perfect for somebody who has experience in the heat treating industry. We are offering commission based employment that pays much more than typical commission jobs. The opportunity is Huge! We have a multi-million dollar established business on the east coast and would like to match it on the west coast.
Company ID: 112202 - Click Here for Full Details
Product Lines:
Our Factory Manufactures Molding, Painting, SMT, Assembly, Testing, etc. in both Dallas, TX and CUU, MX.

Major Manufactured Products are Consumer Electronics Devices. 
Target Markets:
Automotive, Medical, Toys, Consumer Electronics. 
Sales Opportunity:
1We belongs to a large group, the biggest electronic manufacturer in the world. We have been extremely successful in the past 30 years. It's an opportunity to experience our main company's culture and networks. We will fully support our sales rep not only in US/MX, but also global resources.
Company ID: 112201 - Click Here for Full Details
Product Lines:
Metric Hydraulic Hose, Fittings, Tubing, Adapters, and Fluid Line Components. 
Target Markets:
OEMs and Distributors. 
Sales Opportunity:
30+ years of selling metric hydraulic components. Well established network of European suppliers with quick deliveries. Metric high pressure hydraulic hose assemblies. Metric smooth bore and convoluted Teflon hose assemblies.
Company ID: 76727 - Click Here for Full Details
Product Lines:
Springs, Wire Forms, and Metal Stampings.
Heat Treating, Grinding, Plating, Painting, Sub-Assembly, Component Sourcing, Assembly, and Packaging done In-House.
Wire Forming from 0.004" - 0.315" Wire Diameter. Metal Stamping from 0.002" - 0.200" Thick Material on our 25 Ton - 200 Ton Machines. 
Target Markets:
You will find Our Components in Phones (Stamped Battery Contacts and Springs), Awnings (Large Springs to Provide Tension), Tool Handles (Medium and Large Metal Stampings), Power-Springs, Constant Force and Torque Springs, Lawn and Garden Equipment (Thatching Tines, Stamped Engine Covers), and more. 
Sales Opportunity:
Many territories in the USA and Canada are still available.

Our company is a well-established manufacturer located in Changping, China, approximately 1 hour from Hong Kong. We have been in business since 1997, are very well capitalized, and have grown to be one of the largest spring, wire form and metal stamping companies in China.

We operate over 120 spring/wire forming machines and 65 metal stamping machines as well as a dozen grinding machines. We provide heat treating, plating, painting, powder-coating, PVC coating, assembly, material, and coating certification, and packaging value added services. All of our tooling is made, maintained and stored in-house.

We offer our customers small, medium and large run capabilities. We offer competitive shipping terms of Ex-Works to DDP customers dock. We offer competitive commission structures and bonus commissions for new customers. We are looking forward to helping you serve your customers needs.
Company ID: 111961 - Click Here for Full Details
Product Lines:
Industrial LCD Displays! Upgrade Kits for Machinery with Older CRT Technology in CNC Machines and PLC Controllers. Replacement Keypads, Touch Pads, LCD Displays, Illumination Devices for Older, Discontinued PLC Units (Allen Bradley PanelView, Siemens). CNC Keypads (Anilam, Mazak Amada). 
Target Markets:
Industrial Manufacturing, Automotive Parts, Aerospace Parts, Metal Machining, Food Processing, Re-Builders, Re-Sellers, Theme Parks, Resources. 
Sales Opportunity:
We are looking for regional sales representatives who are presently calling on industrial machining facilities, industrial service centers and suppliers of OEM components, machine shops, and tool & dies shops. We offer the following opportunity to add to their existing lines.

Upgrading older CNC machines is a growing market as parts for older CRT (Cathode Ray Tube) become unavailable or are too expensive to repair. Older PLC displays are in high demand as their OEM manufacturers discontinue supporting them. We provide better than original replacement and upgrade components.
Company ID: 111912 - Click Here for Full Details
Product Lines:
Prototype, Production Injection and Milling, and Compression Tooling, Manual Turning and Sinker EDM, Injection Mold Repair and Maintenance, Special Machines, Fabrication. 
Target Markets:
Injection Molders, Inventors, Manufactures, Anyone Needing Machined Parts or Tooling. 
Sales Opportunity:
Small company looking to expand its market and increase sales. More than 25 years experience in design and machining. Looking for a sales rep for a long term, profitable relationship.
Company ID: 111907 - Click Here for Full Details
Product Lines:
Our Company is the Leading Provider of Nitrogen Generators!

Our Nitrogen Generator System is a Cost Effective, Safe, and Reliable Alternative to N2 Gas Deliveries in High Pressure Cylinders. Eliminates the Need for Ordering Nitrogen Dewars, High Pressure Cylinders, or Bulk Liquid Fills. 
Target Markets:
Sales Opportunity:
We can pay up to 15% on the generator. Please submit a sales inquiry to me for details. We ship all over the world and have a great reputation. If you come across any customers that us Nitrogen in any way, this is a very easy sale!
Company ID: 111856 - Click Here for Full Details
Product Lines:
We are a Manufacturer of Professional Desktop 3D Printers.

We Specialize in FFF (Fused Filament Fabrication) Printers. Our Product is User Friendly and Made in the USA. Full Factory Support and Warranty. 
Target Markets:
Manufacturers, Engineering Firms, Architects, Aluminum Extruders, Plastic Extruders, Rapid Prototyping. Colleges and Universities, Schools. 
Sales Opportunity:
3D printing is an expanding market. We offer a 10%-20% commission base. Our business is centralized in the US. We offer excellent customer service and quality products at competitive prices. We are a young growing company with open territories available.
Company ID: 106481 - Click Here for Full Details
Product Lines:
Apparel and Accessories: Denim Jeans, Trousers, T-Shirts, Socks, Uniforms, Knits, Hats. (Softlines)
Leather Goods: Bags, Belts, Wallets, Briefcases, Backpacks, Jewlery, and Accessories.
Home Accessories: Ceramic, Pottery, Furniture, Pet Accessories. (Hardlines) 
Target Markets:
Store Chains, Private Labels, Full Package Developers, Hispanic Markets, Apparel Importers. 
Sales Opportunity:
Products produced in Mexico with NAFTA benefits (no duty, excellent quality at competitive prices). Guanajuato State Government supports local manufacturing companies to hire and pay international sale reps. Manufacturing companies are Government selected and approved as competitive exporters and reliable manufacturers.
Company ID: 111589 - Click Here for Full Details
Product Lines:
Microscopic Laser and TIG Welding Services. 
Target Markets:
Tool and Die, Medical, Aircraft, Electronics, Plastic Injection Molding, Blow Molding, and Prototyping. 
Sales Opportunity:
Ours is one of the the first companies to specialize in the micro welding of tools, dies and molds. Utilizing the latest techniques and modern equipment, our team of skilled micro welders are able to provide precision micro-welding, involving your most common or complex repairs. We understand downtime is costly.

Therefore, fast, dependable service at competitive prices is our top priority. Tool & Die welding is always a challenge. We strive to fill any and all needs that may arise, including the smallest microscopic welding requirements to larger injection molds. We have extensive knowledge and experience in metallurgy, therefore each job is evaluated to ensure the correct filler material is used to yield the highest quality, longest lasting repair.

We are new to the Sales Rep. Culture, but we adapt well! Proper commission will be put in place for reps who produce. We recognize the hard work ahead and are ready for change!
Company ID: 111531 - Click Here for Full Details
Product Lines:
Air Preparation Units, ISO Air Cylinders, Solenoid Valves, One Touch Fittings, Flow Control Valves, Pneumatic Counters, Pneumatic Timers, Trainer Kits, Proportional Pressure Regulators, NAMUR Valves, Compact Valve - ISO Size 3, Diaphragm Valves, Non-Rotating Cylinders. 
Target Markets:
Agro Industry, Air Compressors, Aluminium Extrusions, Automation, Automotive, Cement Industries, Dairy Products, Food Processing, Foundry, Injection Molding, Leather, Machine Tool,Textiles, Packaging, Paper, Pharmaceuticals, Plastic, Poultry Equipment, Printing, Rubber, Tire Re-Treading Machine. 
Sales Opportunity:
Our company will manufacture and supply world-class Pneumatic products and systems. We will understand and satisfy the exacting needs of customers by providing excellent support service before and after the sale.

This will be achieved through:
1. Customer focus and continual improvement in all activities
2. Building commitment in all levels by training and motivation

Our Strength:
Quality is maintained right from the design stage and is rigorously perceived by the entire organization, right through manufacturing to customer service. The quality is maintained by our company and complies with international standards resulting in high reliability.

The central manufacturing facility in Coimbatore, India is spread across 70,000 square meters and is equipped with technologically advanced machinery, supported by best in class infrastructure. That includes exclusive casting facility with modern pressure die casting machineries, CNCs, machining centres, and special purpose machinery for the shortest through put time.

Automated and flexible production lines with short lead & set up Times for FRLs, Air Cylinders, Directional control valves and One touch fittings facilitate faster response to varied domestic, and global customer demands. Our company offers 15% Sales commission to the representatives and provide online Portal Access to manage the orders. Fulfillment of orders will be taken care by our US warehouse.
Company ID: 29630 - Click Here for Full Details
Product Lines:
We are a Modern Screw Machine Faclilty with over 100 Machines.

We are focused on the connector industry, SMA bodies and nuts dominate our production. But that doesn't mean we can't make other parts also. We can make parts from .125 to 1.250 in diameter. 
Target Markets:
We target Electrical Connector Companies but we look for Commercial Accounts that require good quality parts at a fair price. 
Sales Opportunity:
We are very anxious to build increased customers in the USA. We are hoping to find Reps that are willing to help us take on this challenge. We have been in business for 20 years. We have installed 6 more CNC machining centers to help us deliver short run work faster. Our quote time is less than one day and our deliveries are aggressive!
Company ID: 98608 - Click Here for Full Details
Product Lines:
Ours is a Patent Protected, Award Winning Cleaning Technology that is Attracting Attention by Fortune 500 Companies Around the World and is Quickly Becoming Best Practices.

Replace Chemical Cleaning
Replace Dry Ice Blasting
Replace UHPWW 
Target Markets:
Aerospace, Automotive, Contract Cleaning, Fire Restoration, Food and Beverage, Foundry, Historical Restoration, Plastics, Medical Device Cleaning, Packaging, Power Generation, Printing, Rubber, Nuclear, Marine, Locomotive, Petro Chemical, Refinery. 
Sales Opportunity:
Join the Ice Revolution!

We are a dynamic, well funded, aggressive technology company that has created a compact cleaning system that uses H2O ice as the primary cleaning media. Not only do we have a very strong and intense innovation plan to take this technology to the next level, If you invest your time into us, we will invest into you and make sure that you don't come up against competition.
Company ID: 108846 - Click Here for Full Details
Product Lines:
Heat Treating Services such as Vacuum Solution Annealing, Hardening & Ageing.

Atmosphere Batch Carburizing, Neutral Hardening & Normalizing, Nitriding. 
Target Markets:
Services are Aimed at Metal Fabricators, Machine Shops, Job Shops, Stamping, and Tool & Die. Targeted Marketing Campaigns to Assist the Rep Agency in Selling our Services. 
Sales Opportunity:
Our company is currently seeking independent Sales Representatives nationwide. We are interested in working with well-experienced Representatives that have strong ties, but not limited to, the ever growing Aerospace, Energy and General Industrial markets. A successful candidate would be familiar and experienced in the following areas; • vacuum heat treating and brazing • vacuum hardening, annealing, age hardening, stress relieving and other related thermal processing services. • nickel base alloys • titanium alloys • austenitic stainless steels • PH grade stainless steels.

We want to expand our reach to the thousands of mid-sized and smaller customers requiring heat treating services. That is where you come in.

The advantages for your company:
 Easy to work with supplier
 Easy to sell basic services (no inventory requirements)
 Strong commissions
 Large and growing market

An opportunity to be one of the select few Sales Representatives in the North American market. We are selective in our appointment of Sales Representatives so the growth potential is phenomenal! Let us know if you are interested in exploring this opportunity.
Company ID: 111255 - Click Here for Full Details
Product Lines:
Custom Plastic Injection Molding, Medical Clean-Room Molding, Design Engineering, Mold Manufacturing, Assembly, Testing, and Packaging.

From Concept Prototyping to Tooling, Validation, Short and Long Run Production 
Target Markets:
Aerospace, Commercial, Consumer, Medical, Electronic, Defense, etc 
Sales Opportunity:
We are looking for a highly motivated Sales Rep to make our company excel and take the big jump into growth. We are actively looking into growing our customer base and are compensating our Sales Rep with 10% commission on production orders.
Company ID: 111202 - Click Here for Full Details
Product Lines:
Our Main OEM products are Drains, Pans, Mosaic Mesh, Drainage Accessories, etc.

Especially for the Shower, our Main Special Product is a Quick and Easy Installation, Fits Standard Wall Framing, Waterproof (Plastic Injection Moulding), Will Not Mildew, Rust, or Leak. Ready for Tile. 
Target Markets:
Bathroom Decoration Companies, home Remodeling Companies, Furniture Companies, Retailers, Dealers. 
Sales Opportunity:
We are a company committed to the design and manufacturing of plastic materials for construction. We are engaged in mold construction and injection and blow molding. Based on the experience of molding and design service for companies abroad in construction and an R&D team, we begin to design and manufacture our own brand building materials since the beginning of 2013.

Our 1st batch of products are sump gratings, mosaic tile grids, shower niche and tool accessories. We're planning to develop several product scopes as shower pans, trays, shaving steps and some other products which are welcome in the shower. Our goal is to make your shower room simpler and easier with good appearance.
Company ID: 110707 - Click Here for Full Details
Product Lines:
Target Markets:
Sales Opportunity:
Our company is a leading supplier of Automation, Filtration, Safety Equipment & Process Control Products, & Systems for Oil & Gas Industry, Petrochemical, Refineries, Power generation and Marine Market.
Company ID: 110500 - Click Here for Full Details
Product Lines:
Manufacturer of Color Concentrates and Compounds in Plastic Pellet Form.

For ABS, Polyethylene, Polypropylene, Polystyrene, PVC, PET, PETG, Nylon, and other Various Resins. Color Concentrates in All Colors. Color Consulting and Chip Molding. 
Target Markets:
Profile Extrusion, Sheet Extrusion, Injection Molding, & Blow Molding. 
Sales Opportunity:
Seeking manufacturer's reps throughout the U.S. to represent our color concentrates to potential customers. Would be a great added opportunity to reps already representing resin suppliers to above target markets.
Company ID: 110484 - Click Here for Full Details
Product Lines:
Molding, Extrusion and Calendering Parts:
- Rubber Keypad/Assembly Keypads/Membrane Keypad
- Silicone Components for Automotive Application
- Rubber O-Ring, Seal, and Gasket
- Silicone Sheets with Different Application 
Target Markets:
Automotive, Medical, Electronics Fields 
Sales Opportunity:
We are a major silicone material distributor and also an active silicone products manufacturer Certified with ISO 9001, TS 16949, and ISO 14001. With decades of experience in the silicone field, we have the ability and capacity to provide a wide range of silicone products in different industries.

- Sample available upon request
- Training materials
- Commission: To be discussed
Company ID: 110338 - Click Here for Full Details
Product Lines:
Low Pressure Aluminum Casting Mould and Vacuum Die Casting Aluminum Parts. 
Target Markets:
Aluminum Auto Part Manufaturer
Automobile Manufacturer
Medical Equipment Industry 
Sales Opportunity:
Our company was founded in November 1990 and is not only the manufaturer, but also a technical research and service enterprise. Our registered capital is RMB $45.75 million. Specialized in the integrative research and supplying of aluminum alloy material performance, product design, equipment manufacturing, process technology, and mould technology.

We made outstanding contributions to run up China’s wheel industry from zero to the world’s top. The annual output of current moulds contains over 2000 sets. We have become the largest OEM aluminum alloy wheel manufacturer in China. Meanwhile, our company has made the significant breakthrough in complicated products which includes casting technology and mould manufacturing.

That completed the design and manufacture of automotive engine cylinder, pump covers, sumps, and so on. We have been in the die cast business since 2000 and these products covered automotive parts, microwave communication, electrical appliances. The annual output is over 4,000 tons.

The Core value of our company is "good faith, technological innovation, customer success". "Unity, Hard working, and Pursuing super excellence" is our enterprise motto. We are faithfully living up to our mission that helps customers increase value, assist with employees knowledge acquiring, let shareholders share profits regards " To be a high efficiency solution provider basing on technological innovation and integrated ".
Company ID: 110192 - Click Here for Full Details
Product Lines:
We Began 30 years ago Manufacturing Cast Urethane Products to the Oil and Gas Industry.

Since then We have Branched into Many Other Markets that Use our Products. Our Parts include Cast Urethane Rollers, Pipe Rack Strips, Traction Pads, Roller Racks, Spacers, Tubes, Sheeting, Bar Stock, etc. 
Target Markets:
Oil and Gas, Pipeline, Agriculture, Horizontal Directional Drilling, Offshore Marine Construction, Automotive, Machining and Equipment, Automotive, Mining. 
Sales Opportunity:
We offer a very broad range of cast urethane products that are used in many different markets. We offer extremely competitive pricing and very quick turnaround times.
Company ID: 110155 - Click Here for Full Details
Product Lines:
Forklift Training/Certification:
Class 1 Electric Rider Trucks
Class 2 Electric Narrow Aisle
Class 3 Electric Motor Hand Trucks
Class 4 Internal Combustion Engine Trucks
Class 5 Internal Combustion Engine Trucks
Class 6 Electric & Internal Combustion Engine
Plus: Train-The-Trainer Course 
Target Markets:
Any Type of Company that Employs Forklift Operators such as:
Distributions Companies
Third Party Logistics
Mom and Pop Businesses 
Sales Opportunity:
We are an OSHA Compliant Forklift Training and Certification Company offering onsite forklift Certification OR Train-the-Trainer certification.

OSHA requires that any employer employing a forklift operator must adhere to the following:
- OSHA standard 29 CRF 1910.178 requires employers to establish and implement forklift training and certification as required by OSHA regulations can result in fines up to $7,000/employee.

What sets our company apart is we deliver quality, thorough and efficient training which meets OSHA standards. Our credentialed trainers know the industry rules and regulations, ensuring your company is a safer place to work after we leave. We understand that great training builds driver confidence and poor training leads to accidents which can cause property damage or even worse, injuries that can sometimes be fatal.

This is big niche which is highly misunderstood among employers. There is a large need for companies to seek out third party trainers to implement an in house forklift certification course OR hire us to do the certification in house for them. We are available 24/7 for our reps with any questions you might encounter in order to close a deal. We provide you with the knowledge and support to answer any questions

Commission Structure:
30% Commission from each sale
*Paid out once customer makes payment
Company ID: 110115 - Click Here for Full Details
Product Lines:
Industrial Services
Hydraulic Component Remanufacturing/Repair/New
Cylinders, Pumps, Valves, Motors, Power Units, Filtration Systems
Automation, Controls, Custom Equipment, Panel Builds, Data Collection
On Site Maintenance, Equipment Installation, Machining, Lubricants 
Target Markets:
Manufacturing, Aluminum Mills, Steel Mills, Forging Paving, Rubber Molding, Plastic Molding, Rubber Extrusion, Plastic Extrusion, Foundries, Conveyors , Construction, General Contractors, Excavating. 
Sales Opportunity:
For over 20 years our comapny has provided our customers a one stop solution for all of their industrial service needs. We provide hydraulic repair, remanufacturing, new on all components, including pumps, cylinders, motors, and valves.

We also provide our customers general maintenance options providing expertise in installation, industrial maintenance, preventative maintenance, and general manufacturing contractor services. Last we provide integration support with things as: controls, robotics, custom automation equipment, and everything in between. So when you have an industrial service problem make DM your one call to provide all of your service needs.

This is the elevator pitch we use to attract our customer base. We are looking for people to open doors and make relationships. We will support with our team of Engineers and Technicians for visits to customers. We have found that providing a one stop solution provider makes selling a bit easier and the customer's life much easier, because with one call we can service all of there needs.

We look forward to a conversation, because we are a company that is built upon and believes that relationships are extremely important and a must for success.
Company ID: 108665 - Click Here for Full Details
Product Lines:
Our Product is a Spray Applied on Ships and Cooking Equipment to Insulate Against Condensation, for Personnel Protection, and to Conserve Energy (25%+ Savings).

This Saves Energy and Application Time where Traditional Materials have Never Worked before. 
Target Markets:
Ship Operators, Shipyards, and Food Processing Plants. Vigor Marine, Victoria Shipyard, ConAgra, Del Monte Foods, Seneca Foods, etc. are Customers. International Partners Sell to O&G, Mining, and Heavy Industrial Users. We are a Vendor for Kiewit Construction Based on Targeting Commercial Buildings. 
Sales Opportunity:
Our product is an insulation coating used extensively within the marine industry and is becoming a standard insulation treatment within the food processing industry.

Ceramic insulation was initially introduced as a miracle insulation by several producers. Their initial hype and lack of substantiation led to ceramic insulation's reputation as "snake oil" by some users and the insulation industry. We believe we are past this phase, based on a clear focus on performance and applications proven to be working. Also, to be able to clearly explain how our blocks heat transfer and how to measure it's performance with ROI and NPV metrics.

We have relied on credible performance metrics based on applications within marine and food industries to clearly demonstrate viable applications that are referenced within marine and food industries. Rebates provided to food processing users in California by Sempra Energy and PG&E are based on performance validation.

This product is sold based on solving common problems like ship-based condensation wetting traditional insulation, allowing insulation of food plant equipment that could never be insulated before. It also reduces the cost of insulation and provides a 1-2 year ROI in food plants and $10K/canner unit NPV, based on saving energy.

Our company has focused on developing performance metrics and sales tools so a full-fledged sales distribution system can now be deployed. Sales staff are the next key element required to move forward.
Company ID: 109873 - Click Here for Full Details
Product Lines:
We Set Up B2B Businesses and Merchants with Credit Card Processing Solutions to Collect their Accounts Receivables. 
Target Markets:
Manufacturers, Wholesalers, Distributors as well as the Software any B2B Organization Uses in Production or Management of their Business. 
Sales Opportunity:
This is a lucrative and proven 1099 commission-based opportunity. We are looking for motivated independent agents and/or referral partners with a large database of contacts that have the potential to build a book of business and earn a six-figure residual income! Again, we are looking for individuals who want freedom and flexibility to control their own schedule and have unlimited earning potential with lifetime vested residual income.
Company ID: 109878 - Click Here for Full Details
Product Lines:
Screw Machined Parts Using a Variety of Materials including Brass, Stainless Steel, Carbon Steel, Aluminum, and Titanium.

We Make our Own Tools to Fit your Print. There are Several Mills for Secondary Operations. We also have a Small Press and we can do Light Assembly. 0ppm Vision Sorting Available. 
Target Markets:
Auto, Plumbing, Conveyor, Furniture, Plastic Injecting, and Parts Distributors. 
Sales Opportunity:
Our main goal is to provide our customers with high quality, on time, cost effective screw machine components. We are a lean facility which allows us to keep costs at a minimum, enabling us to be very competitive with other suppliers in the screw machine industry.

Minimum run quantities are set at 50 pieces. There is no maximum quantity. Average lead time is 4 weeks. We can expedite most parts in 2 to 3 days if needed. We run 1 shift Monday-Friday with occasional weekends. Family owned and operated in the U.S.A! Two generations ready to meet any demand with decades of experience.
Company ID: 109859 - Click Here for Full Details
Product Lines:
Standard Automation Equipment around our Four Core Competencies of Plastic Joining, Precision Fastening, Leak Testing, and Clip Installation. 
Target Markets:
Automotive and Medical OEMs. 
Sales Opportunity:
The owner of AMS was a manufacturer's representative for 18 years before founding the company. AMS understands how to support independent representatives. We have a dedicated sales development representative/inside sales support staff to help with prospecting and lead generation. Our company was voted one of the fastest 55 small growth companies in Cincinnati in 2016. We are looking for exclusive representation in the state of Indiana and Michigan.
Company ID: 97283 - Click Here for Full Details
Product Lines:
Machine Tool Protection Products
- Way Covers
- Bellows
- Roll Up Covers
- Way Cover Repair
- Way Wipers 
Target Markets:
Our Products will market to:
OEM Machine Tool Builders
Integrated Suppliers (Resale)
End-User Market (from Large Automotive and Aerospace to Small Machine Shops)

The Target Audience varies from Engineers to Buyers to Maintenance Managers. 
Sales Opportunity:
From sales to engineering to manufacturing we have the experience to bring best in class customer service to an industry desperate for a quality supplier.

We offer attractive commission rates:
- OEM 5%
- Resale 10%
- End-User 15%
Company ID: 109594 - Click Here for Full Details
Product Lines:
Caps, Closures, and Dispensers Used for Food Products. 
Target Markets:
Food Processors, Nutra Markets, Distribution, Contract Manufacturers, and Brand Owners in the Food and Beverage Space. 
Sales Opportunity:
Global company with a great reputation for service quality and product development. We provide and opportunity to sell custom products as well utilizing stock tooling for standard and semi-custom products. Looking for professional representation familiar with the food processing and nutra markets and the distribution network servicing those clients.
Company ID: 102159 - Click Here for Full Details
Product Lines:
1. Custom Automation & Machinery
2. Standard Products: Powder Press, Liquid Silicon Rubber Pump, Smart Wedge Dial/Index Table
3. Customer Care Field Service and Support 
Target Markets:
1. Any product manufacturers
2. Some of the Industries Served are: Military, Aerospace, Pharmaceutical, Cosmetic, Water & Filtration, Rubbers & Plastics, Automotive, Packaging
3. Global Alliances 
Sales Opportunity:
With our standard product line available for sales globally amongst several industries, we believe these will open doors and continue to flow constant opportunities to our company and reps that support us.
Company ID: 109032 - Click Here for Full Details
Product Lines:
Tooling, Production, Automation Machinery, Heavy Equipment, OEM Parts, Injection Molding, Die Cast, Secondary Finishing, PCBA, Electro-Mechanical Assembly, Software.

Chemical, Automotive, Automation, Medical, Vending, IoT, Industrial Milling, Commercial Beverage, Electronics, and more. 
Target Markets:
Target OEM Employees in the following roles: Engineers, Engineering Manager, Vice President of Engineering, Sourcing, Sourcing Managers, Supply Chain Managers, etc. 
Sales Opportunity:
Time is up for making simple bids. It's time for you to provide consultative solutions with the most supportive design, engineering, and manufacturing team out there.

Think It. Make It.
Your go-to manufacturing company for sustainable solutions. Linx is a contract manufacturer driven by our design and engineering consultancy. Think of Linx as an extension of customer operations. Our company helps clients achieve their business and engineering goals through transparent communication and expert problem-solving.

Our hybrid project teams are comprised of project managers, designers, engineers, suppliers, quality teams, and business unit leaders who work together to reach common goals with agility and tenacity. Our clients are collaborators with a voice in each communication.

We provide the very best engineering and manufacturing China has to offer. We are a team of thinkers and doers who challenge the status quo in order to provide the right solutions. Our innovation team spans from UK to Chicago to Dongguan.

All locations are ideally located to serve customers in the United States/Europe and manage suppliers in China. Ours is a family-owned and operated company. We care deeply about each other and the work we do. As our representative, we will treat you with respect and support your sales, even after closing. Commission negotiable.
Company ID: 109273 - Click Here for Full Details
Product Lines:
Precision Machines Parts 11" Max Diameter Specialize in Medium Volume from 1,500 pcs EAU to 100,000 pcs. 
Target Markets:
Engineers and Manufacturers. 
Sales Opportunity:
We specialize in making precision machines parts and also can offer many different ways to manufacture parts. We have 25 multiple screw machines that go up to 2-5/8" diameter and also have 7 Swiss machines that can make almost any part complete up to 1-1/4"diameter. We also have multiple lathes that have a Y axis and go up to 3" in diameter.

Our milling machines consist of Haas that have different indexers and a 5th axis. We also have a Makino hospital machine that can make almost any milling part complete. Our inspection department offers a vision system, 2 oasis's, multiple comparerators, and a Zeis scanning CMM. We believe in continual training with our employees so we can stay aggressive in multiple markets. Between our 2 building's we have 40,000 square feet.



Canandaigua Chamber of Commerce


© 2018