Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Industrial\Energy Management Equipment
Click on Company ID to View Full Details
Company ID: 114575 - Click Here for Full DetailsUpdated
Product Lines:
1. UTP Cable
Cat.6A/6/5E/5/3 CM, CMR,CMP
Structured Cabling Accessories (Patch Cord, Patch Panel)

2. Coaxial Cable
Feeder Cable, 50 Ohm (Foam Dielectric) Coaxial (Foam Dielectric) Radiating Cable
LMR Coax Series
5C-HFBT (RG-6), 7C (10C) - HFBT

3. Foam Skin Cable
4. Computer Shielded Cable 
 
Target Markets:
Telecommunication Companies
Communication Construction/Equipment Companies
Electrical Construction
EPC (Engineering Procurement Companies)
CATV Entrepenuers
Broadcasting Business Operators
Mobile Carriers
Highway Construction
Fire Protection
Railway and Railway Construction 
 
Sales Opportunity:
Usually 3% commission given per successful project. However, amount may be negotiable depending on the size of the project and other factors. Generally can take anywhere from 8-10 weeks from acquisition of a project.
 
Company ID: 67924 - Click Here for Full Details
Product Lines:
- Headquarters and R&D are in Switzerland.
- Wall Mount and DIN Rail Universal Controllers with Flexible Parameter Setting Routine. One Controller for many Applications.
- Temperature and Humidity Transmitters, Thermistors, and RTDs for Room, Duct, and Outdoor Applications. 
 
Target Markets:
HVAC Control Contractors, Mechanical Contractors, Building Owners, Managers, and Consulting Engineers. 
 
Sales Opportunity:
- We offer a full range of Swiss engineered, highly flexible control products.
- Representatives will be hard pressed to find a product range offering this much at more cost effective pricing.
- Large company capability with small-company responsiveness.
- Double digit commission rates, protected territories.
 
Company ID: 114403 - Click Here for Full Details
Product Lines:
Our Company Specializes in Innovative Air Diffusion Solutions.

Metal Micro-Perforated Air Ducts for Air Diffusion. We Guarantee the following Performances:
- No Heat Stratification
- No Residual Air Draft
- Up to 20-100% Variable Air Flow
- Up to 320 ft Air Through Range 
 
Target Markets:
General Contractors, Engineering Offices, Architects. These Kinds of Buildings: Commercial, Industrial, Stadiums, Pool, Gymnasium, etc. Any Buildings Except for Residential. 
 
Sales Opportunity:
This is an exceptional opportunity to work with us because we just branch out stateside. We are leaders producer of metal micro perforated air duct in the EU market and we know that the USA market has a lot to offer. We will support you as much as you want us to. Know that we will be in charge of writing quotes. We believe in training sessions and visit our manufacturing plant (based in Italy) with clients.
 
Company ID: 101392 - Click Here for Full Details
Product Lines:
LED Retrofit Lighting Solutions for 2x2 and 2x4 Troffers
LED Retrofit Solutions for Highbays Lights
New Lighting Solutions for 2x2, 2x4, and Highbay Lighting. 
 
Target Markets:
Any Commercial, Municipality, or Manufacturing Business. 
 
Sales Opportunity:
Our company is a national company partnered with Samsung to deliver one of the most energy efficient and economical lighting solutions in the market today. The money our customers save on energy reductions pays for the solution in a short period of time. Our national financing options allow our customers to buy the lighting solution and use the solutions as collateral.

We train our reps to fully understand how to deliver proper expectations to our customers. We have live support to answer questions for reps in the field. There is no ceiling on the potential customer base and commissions do not decrease with volume. Our product has a 5 year warranty on the driver and a 10 year warranty on the LED strips. We can help you deliver a superior product that with high level technical support.
 
Company ID: 113041 - Click Here for Full Details
Product Lines:
Ductless Mini-Splits: Single Zone, Multi-Zone, Light Commercial.

A Complete Line going From 15SEER to 38SEER, Cooling, and Heat Pumps. VRF and Mini VRF: Heat Pump, Heat Recovery, Ultra Heat. Unitary Products. 
 
Target Markets:
We would like to Develop a Relationship with Wholesalers and/or Large Contractors. 
 
Sales Opportunity:
Our mission is to provide the greatest value through dependable equipment, sterling support and honest pricing. We have developed and recruited a seasoned local sales force and an experienced tech support team. We have one of the most innovative extended warranty program for the distributors, the contractors and the equipment owners. We have created the necessary tools and infrastructure to support/train and develop Willis HVAC into a Premium brand in North America.
 
Company ID: 113878 - Click Here for Full Details
Product Lines:
sp Refrigeration Retrofit Evaporator Box Equipment:
EC Motor Controllers
Programmable - ICE Motors
ASHC (Anti-Sweat Heater) Controllers 
 
Target Markets:
Convenience Stores; Hospitals, Schools, Universities, Military, Pharmaceuticals, Restaurants, Smaller Grocery Chains, Funeral Homes, Government Facilities, Sporting Arenas, Hotels and Conference Centers. Any Business that Owns Commercial Refrigeration. 
 
Sales Opportunity:
The commercial refrigeration market consumes 990 Trillion BTU's and represents 20% of the world's energy production per year (information obtained from a Department of Energy Report). The technology for the boxes has not changed since the 50' & 60's and is antiquated. By installing our Smart Technology Equipment, we can reduce the consumption down to 266 Billion BTU's of energy. Making a Huge Impact!

Our proprietary software and equipment removed the antiquated parts in the evaporator boxes to not only save energy but provides Smart Technology on the operation and maintenance of their walk-in boxes using iPhones and smart tablets. Plus we offer an unprecedented 5 year warranty on the equipment. Right now, our technology is cutting edge and the only one of its kind in the industry.

Refrigeration Technologies' will support reps in the participation of trade shows, direct mail, Web Leads, as well as speaking engagements and presentations. We have leads from various shows now that need follow-up and we receive inquiries on a daily basis. We will train all Sales Reps in the technologies as well as provide on-site support to clients. We offer a five (5) year continuous warranty and support on all equipment that is sold.

We are looking for Sales Representatives in various parts of the United States. Sliding Scale Commission schedule is extremely generous depending on the level of the sales efforts.
 
Company ID: 51356 - Click Here for Full Details
Product Lines:
LED Displays - Indoor & Outdoor LED Electronic Signage and Billboards.

Why LED Signage? Proven to be 900% more Attractive than Traditional Signage and can Increase Business Profits from 15% - 150%. This is a New Form of Effective Advertising and is a Rapidly Growing Industry in North America. 
 
Target Markets:
TEXAS many leads coming from Texas - Local Billboard Owners, Franchises, Car Lots, Restaurants, Movie Theaters, Commercial Property Owners, and Sign Installers within your Territory. Huge Opportunity for the Right Person or Team. 
 
Sales Opportunity:
We are currently looking for Professional Sales Hunters throughout the United States to help promote and sell our LED Sign products and develop strategic alliances for our product distribution. LED Signs have proven to be a very cost effective investment for many businesses, saving thousands of dollars on advertising costs, by instantly displaying sales specials, promotions, social media, menu items and many more not just for years but decades.

As this technology is being introduced to the market its all about establishing a market share hold in this multi-billion dollar industry, so the potential earnings for this position is very lucrative. Our company is an established manufacturer for over 10 years providing all types of LED display products at and affordable price point and has built a great reputation as a quality manufacturer throughout Canada and is looking to expand its distribution portfolio throughout North America and abroad.

We are looking for experienced professional manufacture representatives with a proven track record of sales and marketing success for specific territories throughout Canada & United States. We offer to our chosen representatives a great commission and bonus structure with an unlimited earning potential with the intention of full time salary + commission employment for proven performance and sales targets achieved. Please submit your sales inquiry for more information on our company and services.
 
Company ID: 108293 - Click Here for Full Details
Product Lines:
Custom Manufacturer of Industrial Curtains including Plastic Strip Doors, Curtain Walls, Airport Baggage Handling Conveyor Curtains, Clean Room Curtains, Laser Barriers, and Data Center Hot Aisle/Cold Aisle Containment Systems. 
 
Target Markets:
We provide Industrial Curtains to a range of Industries including Aerospace, Airport, Automotive, Biotech, Clean Room, Cold Storage, Data Centers, Electronics, Medical Device, Pharmaceutical, & others. Sales are Made to End-Users, Contractors, OEMs, and Resellers such as Material Handling Companies. 
 
Sales Opportunity:
Our company takes pride in fabricating custom products to fit the specific needs of each and every application presented to us. The product is delivered in a timely fashion at a reasonable price. Using UPS as our standard carrier, all orders are received no more than five days after they are shipped, at a low negotiated price.

In business since 1978, we use materials of the highest quality and can provide test data in regards to anti static properties and flame spread capabilities for all of our flexible vinyl materials. Our company supports its representatives by maintaining an up to date web and social media presence which along with our participation in trade shows provides qualified leads. Our commission structure of 10% to 25%, based upon product and customer type, affords manufacturer reps a great earning the opportunity.
 
Company ID: 111192 - Click Here for Full Details
Product Lines:
HVAC & Plumbing Products, Dirt Separators, Pressure Reducing Valves, Radiant Heating Solutions, Balancing Valves, Filters, Thermostatic Mixing Valves, OEM Parts. 
 
Target Markets:
Dealers, Distributors, Manufacturers, Construction. 
 
Sales Opportunity:
Our company is a Multi-Million dollar Italian Manufacturing firm specializing in the HVAC and Building markets founded in 1953. Production is concentrated in Italy out of three manufacturing sites and consists of more than 4,000 products. Being already among the leading suppliers in the European market, our parent company has opened its US division, located in California, to begin to cultivate the USA market.
 
Company ID: 107896 - Click Here for Full Details
Product Lines:
Drilling Equipment such as Casing Heads, Spools, Studded Adapters, Subs, Downhole Drilling Tools, Specialty Fabrication, and Machining. 
 
Target Markets:
Drilling Rigs, Power Plants, and Drilling Contractors in the Geothermal, Oil & Gas, Well Water, & Horizontal Drilling Industries. 
 
Sales Opportunity:
We are a specialized drilling manufacturer based in Nevada and are looking to expand our reach into other areas. We can produce quality products generally faster than competitors. We've worked hard to secure great pricing on materials and freight to keep cost down and so we can remain competitive in the drilling industry.

We are seeking sales reps with oilfield or drilling experience preferred but not required, to work on a commission basis. Most of our products are required in the drilling process, so sales is mainly a matter of having equipment available when the customer needs it, at the right price.
 
Company ID: 89951 - Click Here for Full Details
Product Lines:
Drop-In Replacement Medium Voltage Electric Motors from 300HP - 5,000HP.

Small Production Runs 1-100 is our Specialty. New AC/DC Synchronous Motors. These Motors are Exact Drop-In Replacement Motors for "Older" GE, Westinghouse, Siemens, etc. We Do NOT Sell Off the Shelf Motors. 
 
Target Markets:
Oil and Gas, Nuclear Facilities, Pump OEMs, Water/Wastewater, Mining. 
 
Sales Opportunity:
Our company was established in 1921. High Quality, Reasonably Priced. Large Manufacturing Capabilities. Looking for Reps that have motor sales experience only.
 
Company ID: 109994 - Click Here for Full Details
Product Lines:
1. VRF Up to 64 Zones, Heat Pump Heats Down to -22F Ambient, the Lowest in the Industry, Heat Recovery, Solar PV Assisted.
2. DC Inverter Heat Pump 1-9 Zones
3. PTAC/PTHP (42x16") 208-230/1/60 and 265-277/1/60 AC or HP+ Electric Heater 07/09/12/15K, Replacing Major Brands on the Market. 
 
Target Markets:
1. HVAC/Mechanical Distributors and Contractors (if no distributor)
2. HVAC/Mechanical Design/Specifying Engineers/Consultants
3. Property Owners, Builders, and General Contractors
4. Hotels Owners, Hotel Management Groups and Hotel Builders
5. Corporate Purchasing
6. Government Purchasing 
 
Sales Opportunity:
HVAC & R Representatives in all States of US and all Provinces of Canada (Huge Opportunities).

* Engineered products of great features and high qualities
* Staffed engineers of broad knowledge, experience for best support and customer service
* You sell to good customers, we do the rest.

All electric heat pump heating down to the lowest in the industry -22F allowing to replace traditional "AC+Gas Furnace" in all applications.
1. Mini-split for residential and light commercial projects;
2. VRF for residential, commercial, institutional and hospitality projects, small and big;
3. PTAC mainly for hotel/hospitality industry.

Similar or even better product features and qualities to those brands in the 1st tier:
a. Mini-split and VRF - Mitisubishi, Daikin, LG, Fujitsu, and Samsung.
B. PTAC-Amana/GE but at much better pricing and service.
 
Company ID: 108721 - Click Here for Full Details
Product Lines:
Variable Frequency Drives. 
 
Target Markets:
Manufacturing, Industrial Contractors, Water/Wastewater, OEMs, HVAC, Material Handling, etc. Virtually anyplace in Industry AC Motors are Utilized. 
 
Sales Opportunity:
The RPM line of AC drives is an extremely versatile and reliable offering. It offers several distinct advantages over the competition. The RPM Controls’ drive features state of the art technology and power circuitry designed around efficient, latest generation IGBTs. This means less heat loss and higher reliability.

Instead of random spot checks, every drive is tested at 100% load before it leaves the factory. Precise vector control algorithms yield outstanding performance on even the most demanding loads. They are configured to be exceptionally intuitive and easy to program during commissioning.

While maintaining advanced feature capability for complex applications, the most common parameters are linked together in a subgroup to enable fast and efficient installations for most basic applications.Their western design addresses issues important for success in the North American market. Southern California based support helps insure prompt resolution of any technical issues.
 
Company ID: 110160 - Click Here for Full Details
Product Lines:
Electronic/Electro-Mechanical Product Design, Contract Manufacturing from State-of-the-Art Printed Circuit Board (01005, Nano BGA) to Complete Box Build.

Full Product Testing, Burn-In and Conformal Coating. AS 9100, ISO9001, FDA QSR Compliant, ITAR Registered. 
 
Target Markets:
Military Contractors, Fortune 500 Manufacturers, Start-Ups Specializing in Military, Medical, Safety, Security, Commercial, and Nuclear Markets. 
 
Sales Opportunity:
We specialize in solving difficult design and manufacturing problems. We have received many Patents and awards for our design services. We are very adaptable to address tight schedules and fast ramp ups.
 
Company ID: 109316 - Click Here for Full Details
Product Lines:
We are a Full Service Broaching House Specializing in Blind/Thru-Hole Broaching of Key-Ways and Splines.

We also Perform Shaping, Slotting, and Key-Seating. We Manufacture Spline Shafts, Couplings Along with any Other Parts which Require Internal Key-Ways, Splines, or Slots. 
 
Target Markets:
Target markets would be anyone in Engineering, Purchasing or Upper Management for Companies which Have their Own Product Line or Manufacture Parts in the Agriculture, Motor, Pump, Casting, Oil and Gas Markets. Also, any Machine Shop which Supplies these Companies. 
 
Sales Opportunity:
The machines we utilize are not the standard used by our competitors, they are specially designed and run 30-50% faster than your typical broaching machines which allows us to be more price competitive. We are a smaller family business which prides itself on flexibility, meaning if a customer needs a job done same day or over the weekend, we can accommodate. I would be willing to pay between 5-10% commission based on the job.
 
Company ID: 109556 - Click Here for Full Details
Product Lines:
LED Indoor, Outdoor, Landscaping Commercial Fixtures. 
 
Target Markets:
Local Lighting Distributors, Lighting Showroom, Electrical Supply, Multi-Family Supplies. 
 
Sales Opportunity:
We provides sustainable LED lighting fixtures with good design and reasonable price. We inventory in TX and ready to ship anywhere in United States. We have good compensation for our reps and have sales assistant and lighting consultant here to answer all your questions for your customer. Thank you.
 
Company ID: 105933 - Click Here for Full Details
Product Lines:
Energy Monitoring Sensors.

We Manufacture Current, Voltage, Power, Frequency, and Power Factor Analog and Digital Transducers. We also Offer Current Transformers, Current Relays, Switches and Displays, Custom Designed OEM Units. 
 
Target Markets:
Engineers, Purchasing Agents, Utilities Companies, OEM, Distributors and End-Users. 
 
Sales Opportunity:
Our company is a privately owned business since 1986. We have over 18,000 customers in our database. Customers provide repeat buisness year after year. Our product offerings cover just about any monitoring needs including DC and if we don't have it our experienced Engineering team can custom design it. We own our own building and manufacture most products here in our St. Louis, MO. facility.

We control our own overhead and expenses to compete in almost any market. We have two SMT circuit board stuffing machines, a laser cutter and UV printer for custom labeling and packaging. Travelling with our Reps to train them and get experienced with our products is a number 1 goal to make both companies successful.

Our customer database is shared with the reps and they are treated as an extension of our sales force. Commission structure is 5% for the territory on standard parts and 10% for custom designed units. Very few house accounts in any territory, although there might be some. We are very fair about making sure our Reps are paid the money they helped earn.
 
Company ID: 105064 - Click Here for Full Details
Product Lines:
DewPoint RH% Analyzers, Transmitters, & Probes Compressed Air/Dryer Alarm Systems, Trace Moisture Analyzers, Atmospheric Condition Hygrometers, Precision Humidity Chambers, Engine Test Cell Hygrometers, Chilled Mirror, and Polymer Sensors.

For sale or rent. Made in USA. 
 
Target Markets:
Industrial, Pharmaceutical, Medical, and Metrology Industries, Users of Dry Air/Gases, Private/Government Laboratories, Users of High Precision Moisture Analyzers, Calibration Laboratories, Field Calibration Service Providers, Compressor Manufacturers, Gas Dryer Manufacturers, End-Users, and OEMs. 
 
Sales Opportunity:
A global leader in the design and manufacture of chilled mirror hygrometers and other moisture measurement and calibration devices. The company is seeking aggressive manufacturers representatives in Alabama, Alaska, Arizona, Arkansas, northern California, Colorado, Florida, Georgia, Louisiana, Maryland, Missouri, New Mexico, Minnesota, Mississippi, Montana, New Jersey, Oklahoma, Oregon, Eastern Pennsylvania, South Dakota, Texas, Utah, Virginia, Washington, and Wyoming wishing to add a domestically manufactured and supported, premium analyzer line to their portfolio. Also seeking representation in South and Central Americas.
 
Company ID: 114448 - Click Here for Full Details
Product Lines:
Ball Valves, Gate Valves, Butterfly Valves, Check Valves, Choke Valves, Wellhead, & X-mas Tree. 
 
Target Markets:
Our Products are Widely Used in Natural Gas, Oil, City Heat Supplying Fields, especially Applied to Natural Gas and Oil Long Distance Pipeline, Tank Field Pipe Network (including Wharf, Airport, Oil Depot, Oil Tankers, Oil Station)s, etc. 
 
Sales Opportunity:
We have introduced world level technology and management processes to produce the international advanced grade of fully welded pipeline ball valve, flat gate valve, valve actuator, and other high-tech products.
 
Company ID: 114414 - Click Here for Full Details
Product Lines:
North American Transportation Services.

We Provide Trucking, Intermodal, Ocean, and Air Freight Shipping Throughout the World. Trucking Services are on Dry Vans, Refrigerated Vans, Flatbeds, and other Specialized Equipment. Same Day Pickup and Delivery, LTL, FTL, & Expedited Services. 
 
Target Markets:
Our target market is Mid-Sized Manufacturing and Distribution Companies within Canada and USA.
- Food Industry
- Auto Parts
- Textiles
- Steel
- Plastics
- Wholesale Trading
- Retail Merchandise
and more 
 
Sales Opportunity:
Our company is looking for a sales representative who has a hunter mentality & knows how to close deals to help us expand our transportation services into the market place. We are a start up logistics company but with over 20 years experience in the transportation industry we are experts in our field. The selected candidate must have a proven track record selling and must be aggressive in sales. Our commission structure is competitive you set your own hours.
 
Company ID: 114201 - Click Here for Full Details
Product Lines:
We Produce: Unique Vacuum Stations, Unique Machines for Testing the Radial Clearance in Bearings, Unique Tribometer, Unique Pneumatic Clamps, and more.
We also Offer Custom Engineering Services. 
 
Target Markets:
OEM, Automotive, Aerospace/Aircraft, Industrial Distributors, Bearing Manufacturer, Research Laboratories, Universities, Medical and more. 
 
Sales Opportunity:
We are a diverse, fast growing, and high tech manufacturing company that produces our products from start to finish. Our products are unique and have no analogues in the world. These are expertly engineered products that have been manufactured to the highest standards. We can perform any custom order, from engineering design to production. We are looking for representatives that can cover North America territory and are willing to prioritize our products. Commission scale to be discussed personally.
 
Company ID: 113521 - Click Here for Full Details
Product Lines:
Metering Products
Power Quality Meters
Analytical Meters
Power Factor
Sub-Metering
Cap Controller 
 
Target Markets:
Utilities
Utility Contractors
Property Managers
Electrical Contractors
Engineering Consultants
Industrial Contractors
Renewable Energy Consultants 
 
Sales Opportunity:
Our product line serves both energy utilities and energy consumers in various fields. Our devices span from basic power meters up to high performance grid meters with advanced power quality capabilities. The advanced power quality capabilities enable energy utilities to take timely corrective action and help energy consumers to prevent equipment failures. All our devices comply with world-acknowledged regulations and are supported by our energy management software.
 
Company ID: 114134 - Click Here for Full Details
Product Lines:
Solenoid, Solenoid Valves, Solid State Relays, and Required Mechanical Background. 
 
Target Markets:
USA market is currently open for new rep 
 
Sales Opportunity:
Our company is one of leading solenoid manufacturer and our headquarters is located at Taipei, Taiwan with factory located at Ningbo, China. Our solenoids have been widely applied in various industries like kiosks, security, elevators, or automobiles.

1. We provide solution with cost down to customers.
2. We provide technical support to your customers.
3. We start with 3-5% commission by project based.

We are interested to work with you and your company in the near future, and shall answer any questions you may have. Please feel free to submit a sales inquiry us at any time.
 
Company ID: 114054 - Click Here for Full Details
Product Lines:
Anion Exchange Membranes and Polymers.

This is Stable in Both Highly Basic and Acidic Environments, Providing an Improved Product Lifetime in the Harshest Operating Conditions. Broad, Non-Toxic Processability Allows it to be Sold as a Polymer Resin for Coatings or as Cast Membrane. 
 
Target Markets:
Water Treatment OEMs, Chemical Plant Operators and Design Engineers, Energy Sstorage OEMs, Hydrogen Technology OEMs, Biomedical.
Electrodialysis, Capacitive Deionization, and Electrodeionization, Sulphuric and Hydrochloric Acid. Redox Flow Batteries, Fuel Cells & Electrolysis, Biomed Sensors. 
 
Sales Opportunity:
Manufacturers of electrochemical equipment purchase annual volumes in the range of 5,000 - 100,000 square meters of membrane material per year. Each large chemical recovery or generation facility is comprised of 2,000-10,000 square meters of membrane material which is replaced every 1-2 years.

The overall market for ion exchange membranes is currently over $1B and by 2020 is expected to reach $2.5B in existing markets. Of this market, approximately $300M is readily serviceable using Aemion materials and as a sales organization, this could represent up to $30M in potential revenues from recurring sales opportunities.
 
Company ID: 113991 - Click Here for Full Details
Product Lines:
Secure Cloud Service for Linking any Asset (Industrial Control, IoT System, PCs, Everything) to the Cloud.

The Service Improves System Resilience & Security, Asset Awareness, Reduced Operational Costs, & Integration with Other Services to Expand the Customer's Business. Works with Legacy Equipment. 
 
Target Markets:
Industrial and Small and Medium Enterprises (SMEs). 
 
Sales Opportunity:
We have something unique and flexible, allowing customization to any industry. It is easy to install, just a small pluggable element that attaches to any device, which then auto-magically attaches to our cloud service.
 
Company ID: 106464 - Click Here for Full Details
Product Lines:
State of the Art and Industry Changing UL and DLC Rated/DLC Premium Rated LED Lighting, Retrofit Kits, and New Fixtures. Several Manufacturers. 
 
Target Markets:
Schools, School Districts, Hospitals, Hotels, Commercial Office, Warehouse, Government Facilities, Cities and Townships, all Municipalities, Electrical and Lighting Contractors, and Distributors, Facility Managers and Engineers, Property Management Companies, etc. 
 
Sales Opportunity:
Market LED lighting retrofit kits and new fixtures for several of the world's leading and most innovative LED lighting manufacturers. One manufacturer offers a product that has revolutionized the 2'x2', 2'x4', commercial ceiling troffer, and industrial strip marketplace a simple magnetic retrofit kit that takes minutes to install without tools.

It is DLC premium rated and gets your customer the highest utility company rebates. We have sold millions of dollars of this product in a short period of time to large box distributors and contractors and schools. You may need only to sell this product to make an incredible amount of commission.

However, all of our manufacturers are at least DLC rated and most are DLC premium. Generous commission scale to start .You will be able to do your own mark ups on products.Training provided via email,phone and in person. Ad slicks, spec sheets provided via download. Independent reps and agencies welcome to apply.
 
Company ID: 113867 - Click Here for Full Details
Product Lines:
Oil and Gas Services. 
 
Target Markets:
Oil and Gas Companies. 
 
Sales Opportunity:
We want to contact American companies that need representation in Bolivia. Ours is a company of more than 40 years in Bolivia that offers its services to the petroleum companies in the areas of engineering, management of projects, and construction. Our experience is accentuated in gas plants, oil pipelines, gas pipelines, petrochemical plants, and energy providers.

Also we have realized it works with magneto telluric, prospect, and exploration petroleum. We support commercial agreements with foreign companies of prestige and take part in tenders for public and private companies. From 2016 we have added our cadre Unit of Business, which purpose is to represent prestigious signatures as being industries of teams, industrial materials, chemical products that could be sold in Bolivia under the representation of our company.
 
Company ID: 113824 - Click Here for Full Details
Product Lines:
Our company Manufactures Shipping Monitoring Devices that Detect G Force Shock and will Indicate when a Specific G Level is Exceeded.

We Offer Disposable Impact Indicators, Re-Usable Shock Indicators more Advanced Digital Devices that Monitor and Record Impacts and Temperature. 
 
Target Markets:
Power and Energy (e.g. Transformer Manufacturers), Aerospace, Military and Defense, Marine & Offshore, Aviation, Medical Instrument Manufacturers, Nuclear, Technology (Servers & Routers), Instrumentation, Glass Nanufacturers, and others. 
 
Sales Opportunity:
We are looking for Manufacturer Representatives to sell our products in North America. Our products are quality manufactured devices that are precise and reliable. We provide excellent compensation on the products. Our technical and sales support is excellent and responsive. We provide training on our product line and our customer service is friendly and supportive. We are also proactive marketing the pour products and have strong web/market presence.
 
Company ID: 113794 - Click Here for Full Details
Product Lines:
Unique IP for the Permanent Reduction of kWh of Electrical Consumption in Large Cooler and Freezer Areas.

Our System Works on All Types of Evaporator Systems and is Estimated Savings for the Customer Prior to Contract. 
 
Target Markets:
All Large Freezer/Cooler Food Production and Storage Companies as well as Grocery Stores and Food Distribution Centers. 
 
Sales Opportunity:
With 5 years experience and well known companies as satisfied clients we are ready to expand our services beyond Ontario to the rest of Canada and the USA All the savings we produce move direct to bottom line profit so it is an easy sell to business as well we can offer financing as well as any available energy rebates with our system (Excellent commission).
 
Company ID: 113784 - Click Here for Full Details
Product Lines:
We are a Leading Distributor of Rotating, Stationary, and Fluid Power Products which includes Mechanical Seals, Mechanical Packing, Maintenance Products, and Industrial Lubrication and Coatings. 
 
Target Markets:
Our Product Line can be Used in Any Commercial or Industrial Fluid Application including Hydraulic/Pneumatic Cylinders, Pumps, and Line Equipment. 
 
Sales Opportunity:
Who We Need:
- You are successful at building strong relationships with your customers.
- You have that unique combination of technical background, along with people skills.
- You are a "born persuader", and you love a good negotiation.
- You are an experienced sales professional with a proven record of outperforming the competition.
- You live in Middle Tennessee or the Chattanooga Area.

How about working at a company:
- That was started more than 40 years ago and whose business is still growing.
- That is family-owned and managed by successful, strategic, personable leaders who know your name and welcome you as part of the “family”.
- That gives you a formal on-boarding program to get you on a fast path to success.
- That has people who are fun, smart, engaged and like working together to bring “Best in Class” service to our customers every day.

Job Summary:
Provide sales, service and technical support for a specific end-user sales territory. Develop and implement territory sales strategies. Responsible for meeting sales and gross profit objectives. Provide and direct the tactical execution of conceptual sales strategies and implementation of contractual agreements. May be required to obtain TWIC (Transportation Worker Identification Credential) from the U.S. Homeland Security.

We offer an aggressive compensation package that includes salary with performance-based commission and expenses.
 
Company ID: 113751 - Click Here for Full Details
Product Lines:
Our Product is a Fan Coil Unit Integrated with Heat or Energy Recovery Ventilator in One Single Indoor Piece.

This Indoor Fan Coil shall be a Connected to an Outdoor Air Cooled Condenser or Heat Pump Unit or to Water Cooled System (Heating or Cooling). 
 
Target Markets:
These Products are a Good Fit for Residential and Light Commercial Applications such as: New Homes, Schools, Green Buildings, High Rise Buildings. 
 
Sales Opportunity:
I believe this is a good opportunity for an agent to sell for these reasons:

1- New, reliable,High efficient and green technology for new buildings and homes.
2- Custom type design which can accommodate different applications and fit different needs depend on customers.
3- price is not expensive compared to low cost low quality fan coil products (only about 5% higher than standard products) and payback is quick for end-user.
4- Nowadays, a lot of end-user are seeking a high efficient and robust equipment.
5- Control is very smart to maintain a high level of comfort and optimization of energy for your building.
6- All in one single piece (heating,cooling and ventilation).
7- One controller will do all of that.
8- No balancing required when you connect a traditional fan coil with a new HRV/ERV unit.
9- Very high efficient at part load operation due to the fact of using fully variable speed fans and compressors.
10- I am the engineer and owner for this company with over 12 years of experience in HVAC industry and I know that this product will find its marketshare with the right partner/agent in each of the US states.
11- For heat pump applications, we are offering, air to water, water to air, water to water, and air to air heat pumps. This heat pump is suitable for a cold climate region as well as it can operate down to 100% heating capacity at 7F for COP = 2.
 
Company ID: 113696 - Click Here for Full Details
Product Lines:
Electric Actuator (Limitorque, Rotork, EIM, etc.) Parts and Services.

Large Inventory of Spare Parts for Limitorque SM, SMA, SMC, SMB, and HBC Actuators and Gear Boxes. Shop and Field Refurbishments Services and Training. 
 
Target Markets:
Electric Generating Stations including Fossil, Oil, Gas, and Nuclear, Petro-Chemical Plants and Refineries, Pulp and Paper Plants, Water Treatment Plants. 
 
Sales Opportunity:
Our company has been in business for over 30 years providing the industries noted above with on-time, error-free cost effective actuator parts and services. We see the use of representatives as a win-win situation for the representatives to focus on sales and we will focus on providing quality services.
 
Company ID: 110370 - Click Here for Full Details
Product Lines:
LED Lighting Luminaire and Bulbs, HVAC Control Device. 
 
Target Markets:
Commercial Clients who are looking for Lighting Retrofit with LED Lighting with Energy Saving. 
 
Sales Opportunity:
Able to grow with company and become allied commercial partner. Attractive package for anyone who is interest to grow the Energy Saving business and assist commercial clients with LED Lighting Retrofit and HVAC solutions. Flexible with all terms and result oriented green technology company. Green technology is gaining momentum globally and has good future.
 
Company ID: 113655 - Click Here for Full Details
Product Lines:
Printed Circuit Boards. 
 
Target Markets:
Assembly Manufacturers, Engineers, Manufacturers of Electronic Products. 
 
Sales Opportunity:
We have been in business for 20 years and we are one of the few shops who MFG boards in the USA. We don't farm out any of our work over seas. we are a debt free company. Our specialty is quick turn, as fast as 24 hour turnaround.
 
Company ID: 113614 - Click Here for Full Details
Product Lines:
LED Lighting (Lamps & Fixtures). 
 
Target Markets:
Electrical Distribution
End-Users (Industrial, Commercial)
Contractors
OEMs 
 
Sales Opportunity:
• Our company has been synonymous with superior design, innovation, technology and quality for over 50 years. Based in Dallas, we have provided electronic products from LED TVs to LED lamps for commercial, retail and consumer customers.
• We maintain an inventory of over 1 million LED Lighting units in our Dallas warehouse for immediate delivery throughout the United States and Canada.
• All of our LED products carry either a 5 or 10 year warranty.
• We have LED lamps that are UL, DLC, Energy Star and Enclosed Fixture certified.
• Our customer service is superior with outstanding product reviews.
 
Company ID: 110320 - Click Here for Full Details
Product Lines:
PCBs - Printed Circuit Boards:
Single Side - SS, Double Side - DS, Multilayer PCB, Multilayer Boards, MLB, ML4, ML6, ML8, ML10, ML12.
Thermal Management Heatsink Metal Core PCB, (Al/Cu) Multilayer Metal Core Aluminium PCB, RF Application Boards, Rogers, Taconic for RF Amplifier, Filters & Antenna. 
 
Target Markets:
OEMs, EMS, CMS
Power Electronics
Automotive
Consumer Electronics
Lighting
Computer & Business Equipments
Defence & Aerospace
RF & Communication
Instrumentation & Medical Electronics 
 
Sales Opportunity:
Sales Reps Required to Work on Commission Basis! We are looking for "Great Sales Reps* who will work for commissions only.

Our company is a leading PCB manufacturer in India exporting PCBs to USA, Europe & Israel. We are a One Stop Solution and can support for Prototype, Quick Turn PCBs, High Mix Low, Medium or Large Volume Production of Bare PCBs. We have capabilities to manufacture PCBs up to 12 layers to very demanding specifications. We are in process to set up a sales office in US to support reps for day to day operations.

We can support for Single Side, Double Side, Multilayer, Metal Core, and RF & Comms grade Rogers PCBs. We have representatives in the US & Europe and are looking to further expand our network via representatives. High Quality PCBs and On-Time Delivery are key to our success over these years. Service you can trust.

We are looking for knowledgeable, experienced candidates or companies who can offer local support for customers and grow our business working on commission basis. Sales Representative to work to expand the existing tried and tested business and bring growth and earn commission. Interested candidates may please submit a sales inquiry to us immediately.
 
Company ID: 113390 - Click Here for Full Details
Product Lines:
Anemometers, Duct Air Leakage Testers, Flow Hoods, IAQ Monitors Particle Counters. 
 
Target Markets:
HVAC, Cleanroom, Industrial Flow Testing. 
 
Sales Opportunity:
Our company has delivered the best measurement solutions with its products and services that adapt precision measurement technology for fluids and particles. We are contributing to technological innovation and quality improvements for the processes of quality and environment management.

Sustaining human well-being in the areas of environment, health and energy have always been a primary focus of our company. We develop leading technology with the goal of maintaining health and safety in industries including automobile, aerospace, semiconductor, electronics manufacturing, heavy industry, steel, shipbuilding, pharmaceutical, biotechnology, food processing, medical, construction and civil engineering.
 
Company ID: 113379 - Click Here for Full Details
Product Lines:
Wide Ranges of Industrial Waterproof Connectors for Transmission of Power, Signal, USB, RJ45, and Fiber Optic.

For indoor and outdoor applications. 
 
Target Markets:
All Types Manufacturers that Need Waterproof Industrial Connectors in their Products, Connection Systems, and Products. 
 
Sales Opportunity:
We have US headquarters with a top level manufacturer focus on industrial connector product design, manufacturing, and distributing.

We are providing to sales representatives an exceptional opportunity of:
1. Super fast growing market
2. Top level products
3. Super high commission
4. Customer and marketing protection

Our sales representatives only need to build the connection with potential customers, our team will do all following jobs including support, and warranty.
 
Company ID: 113174 - Click Here for Full Details
Product Lines:
Industrial Equipment. 
 
Target Markets:
Engineers. 
 
Sales Opportunity:
Our company has a big customer portfolio. We are a fresh company, with experienced salesman and with few brands so we can focus and take more time with the sales of the products you desire. We have the experience, the ability, service and profesionalism you desire.
 
Company ID: 113167 - Click Here for Full Details
Product Lines:
An Innovative, Beautifully Designed Solar Energy System that Through Dual Axis Tracking Follows the Sun All Day for Maximum Energy Production, Cost Savings, and Environmental Benefits.

Our Company Produces up to 40% More Electricity than a Comparably Sized Rooftop Solar System. 
 
Target Markets:
Business, Government, Institutional, and Residential Markets. 
 
Sales Opportunity:
The electricity market is one of the largest markets in the world. Globally, solar energy is the fastest growing energy source. Our sales agents will be representing a unique product that has the potential of producing significant income and important social benefits. Our sales agents will be participating in the transition away from polluting central power plants to providing their customers with a desirable, renewable energy solution. This is the newest division of a company that has been innovating in the energy market for over 40 years.
 
Company ID: 113066 - Click Here for Full Details
Product Lines:
Automatic Lubrication Systems:
- Lubrication Pumps
- Metering Device
- Injectors
- Hose and Fittings
- Automatic Lubrication Accessories 
 
Target Markets:
New Distributors
Existing Distributors
OEMs
End-Users 
 
Sales Opportunity:
The Regional Sales Manager is responsible to act in accordance with company policies and procedures to manage all sales operational activities within a given geographic region. This position reports to Vice President of sales.

• Develop channel (distribution) to achieve annual growth requirements.
• Develop and train key channel on market potential and expectations as well as product features, benefits, applications, sales and marketing programs.
• Develop and support channel growth including annual channel planning and tactic implementation.
• Support OEM activity in addition to developing relationships with key end users and OEM personnel within the area.
• Identify, evaluate and pursue all market initiatives as directed by sales management and maintain adequate distribution to support these initiatives.
• Develop strategic and tactical regional plans targeted to key applicable market emphasis each year.
• Develop and implement yearly and quarterly area sales plans identifying the following:
• Sales goal achievement–real growth strategies and tactics.
• Channel Partners' ability to represent our best interests and grow market share and action on non-performers.
• Participates in the addition or deletion of channel partners in assigned region.
• Identify customer requirements and support services required to meet customer needs and communicate to appropriate department(s).
 
Company ID: 113114 - Click Here for Full Details
Product Lines:
Air Filters for Gas Turbines and Turbomachinery. 
 
Target Markets:
Utilities, Refineries, Pipelines, IPP, Offshore Platforms. 
 
Sales Opportunity:
Our company is a world leader in the production and development of clean air solutions for gas turbines and other turbomachinery.

We are one of the most global air filtration specialists in the world and business is co-ordinated between our own offices in Europe, America, the Middle East and the Asia-Pacific region. We have over 26 production units and R&D centers around the world. The turbomachinery auxiliary systems fabrication takes place at our own facilities in Sweden and India, or at carefully selected sub-suppliers in our global network.

Our power systems group has approximately 225 employees, with sales, engineering and project management in close collaboration. The company’s business concept is to provide customers with best-in-class clean air solutions for turbomachinery; new installations, retrofits, or aftermarket service.
 
Company ID: 105486 - Click Here for Full Details
Product Lines:
We are a Manufacturer of LED Lights for PowerSport (ATV, UTV, Motorcycle, etc.) Retail Stores, Marine (Boat) Dealers, Heavy Duty Trucks, Mobile Electronics, and Distributors/Manufacturers.

We have been in business over 14 years and do over $13 million in sales. 
 
Target Markets:
PowerSport Retail Stores
Distributors & Manufactures.
Mobile Electronics (Limited States)
Off Road Vehicles (ATV & UTV)
Heavy Duty Trucks
Light Duty Trucks
Motorcycle
Marine
Farm Equipment
Distributors
Automobile
Industrial
Commercial 
 
Sales Opportunity:
Midwest Based LED & HID Light Manufacturer paying a huge 12% commission is seeking Rep Groups, independent representatives, and others who want to own their own business selling to PowerSport Dealers (ATV, UTV), Motorcycle, Marine (boating), mobile electronics (limited states), and Light Duty Truck retail chains, dealers, and distributors in certain key states. Must be willing to travel and cover your own expenses. This is a hands on job.

Our company has been in business 14 years with about $13 million in annual sales. Training provided. Samples and other tools provided free of charge. Warm leads provided. Seeking both industry professionals and new independent representatives starting out. We give exclusive territories!

Support includes warm leads, one-on-one training for you, webinars, same day shipments, best sellers lists, sales script, monthly on-line meetings, and we treat you like the professional you are. Submit a sales inquiry to me and I will call you with a friendly no-obligation discussion. I respond to all inquires. Thank you.
 
Company ID: 112965 - Click Here for Full Details
Product Lines:
Our XCPC Collector is Capable of Reaching Temperatures of Up to 400F which is a Perfect Fit for Commercial and Industrial Applications.

Paybacks are Proving to be Between 1-8 Years and the Technology is the Lowest Cost of Solar Energy. 
 
Target Markets:
Commercial and industrial customers: Food/Beverage Industry, Agricultural, Oil & Gas, Distillery, Hospitals, and/or Education. Our Applications include A/C - Refrigeration, Dehumidification, Process Heat/Steam, Desalination, or Water Pasteurization. 
 
Sales Opportunity:
The holy grail of solar thermal has always been to be able to produce air conditioning with Sun. It is now possible to! Our technology is the greatest advancement in solar thermal in over 100 years and we need you to help us get the word out. If your client is looking for sustainability solutions, lowering green house gas emissions, and lowering energy costs, then we may have the answer.

You will not need to redesign existing systems, but rather our product will just inject heat to reduce fossil fuel consumption. You don't need to be an expert in solar, we will provide you the support you need. Bring us the customers and you get paid on completed jobs. Projects range is size from 35 collectors to 10,000 and you get paid per collector sold. Submit a sales inquiry for more info today.
 
Company ID: 112160 - Click Here for Full Details
Product Lines:
We Intend to be a Leader in the Emerging Micro-Grids, Resiliency, Storage Marketplace.

We do Hardware and Software for Analysis, Design, Installation, & Operation of these Plants and Projects. Solutions are Custom Designed to Provide Huge Savings on Electric Bills, with Little or No Out of Pocket $. 
 
Target Markets:
Anyone that Uses Significant Amounts of Electricity, especially Organizations Interested in Clean Renewable Energy Systems are Targets. Our Strength has been Educational, and Local Government Markets. We are now Poised to Expand into C&I and Utility Company Markets. 
 
Sales Opportunity:
This is a ground-floor opportunity to engage with a newly emerging market that is poised to grow exponentially over the next few years. We have seen, experienced, and led the explosive growth that took place in Solar Energy 15 years ago, and are now poised and ready to do it again as Micro-Grids, Energy Storage, and Grid Resiliency take center stage over the next decade! We have an innovative 'revenue sharing' sales model that requires the host customer to put no money down, but simply benefit from the savings and share a part of those savings with us to compensate us for installing the plant at their premises.
 
Company ID: 70656 - Click Here for Full Details
Product Lines:
Industrial Centrifuges and Filters.

We are a Chinese Chemical Processing Equipment Manufacturing Company. Specializing in Separation Machinery, including Centrifuges and Filters. The company headquarters is based in Shanghai, China. 
 
Target Markets:
Fine & Bulk Chemicals, Pharmaceuticals, Sugar Refining, Food, and Agricultural Industrial. 
 
Sales Opportunity:
We are now seeking commission-based sales agents with experience at selling industrial equipment. Our main products are Industrial Centrifuges and Filters. Such as Pusher Centrifuges, Decanter Centrifuges, Top-Suspended Peeler Centrifuges, Horizontal Peeler Centrifuges, Vacuum Drum Filters. Our company was established in 1958 and a leader in China in the centrifuge and filter fields. Submit your sales inquiry for more info.
 
Company ID: 112817 - Click Here for Full Details
Product Lines:
Leading Indian Manufacturer of Switchgear Products, Battery Accessories & DC Busbar Systems.

Specializing in Copper Forging, Copper Casting, Milling and Tubes, Aluminum Products. 
 
Target Markets:
Switchgear Companies, eBuilding Companies, Solar Groups, Refineries, Overhead Apparatus Companies, Server Farm Builders, Battery Companies, Caterpillar, and Mining Companies. 
 
Sales Opportunity:
The US is a $180kk market and we are the largest in the EU, Asia, and India. The ASP for copper based products is high so commissions would be great. We are looking for reps that work and sell as a Manufacturing Repetitiveness in this field. We are not a difficult sell and if you are already in the switchgear companies this is a complimentary sell.
 
Company ID: 112767 - Click Here for Full Details
Product Lines:
Commercial LED Lighting:
Parking Area & Garage Lighting
UFO & Linear High Bay Lighting
Commercial Strip Lighting
Panel Luminaires 
 
Target Markets:
Wholesalers, Distributors, Contractors, Architects, Lighting Re-Sellers. 
 
Sales Opportunity:
This is a great opportunity to join a fast growing LED lighting manufacturer. We are looking for experienced independent sales reps throughout the United States. Sales experience in the lighting industry preferred. Corporate Headquarters: Dallas, TX.
 
Company ID: 112733 - Click Here for Full Details
Product Lines:
We Manufacture Gasketed, Brazed, and Welded Heat Exchangers.

Our Extensive Plate Designs Allows us to be Very Competitive. We Stock SS304/316, Titanium and Hastelloy Plates, this Ensures Quick and On-Time Deliveries. 
 
Target Markets:
We are Focusing on the Industrial Markets. That would included Power, Chemical, Refinery, and Engineering Companies. OEMs that Assembly Packages as well. 
 
Sales Opportunity:
We have been in business for over 25 years and provide our Sales Reps with all of the necessary tools to be very successful. We are very easy to work with and have an aggressive commission schedule.
 
Company ID: 110972 - Click Here for Full Details
Product Lines:
Our Company Creates and Distributes Business Software.

All our Products are SaaS (Software as a Service). Our Products are for Energy Savings, Capital Expenditure Management, Real Estate Lease Management, and Real Estate Space Optimization. 
 
Target Markets:
Companies from many industries such as: Real Estate Owners, Managers and Developers, Banks, Hospitals, Education (All Levels including Colleges and Universities), Restaurants, Hotels, Grocery Chains, Shopping Centers, Housings, Warehousing, Government, and All Manufacturing. 
 
Sales Opportunity:
Our flagship product is a do-it-yourself energy-saving energy software that enables building owners and managers to rapidly create any type of building,then find potential energy-saving opportunities and estimate them. Users can do this much faster than using an external consultant, and in a much less expensive way (1/8th of normal cost).

In addition to this, we also offer services to customers. Most of our customer request all inclusive services where we enter all information for them and find the energy saving potential. This is extra (paid) service that we offer.

We offer attractive commission rates (for sales of software as well as sales of additional services), for both new contracts and renewals. As a SaaS (software as a service) customers pay an annual right-to-use (membership) depending on the number of buildings they have and their size.

While the territories are non-exclusive, we have made it an internal policy not to seek distributors in regions that would overlap already known distributors regions where the representative is performing adequately. We are looking for long-term relationship with partners who want to grow with our company.

We offer complete training as well as sales and marketing materials (power point presentations, help documentations, brochures, case studies, video, features, and benefits documents, as well as other). We provide complete customer support and training as needed. We are a company with members from Canada and USA.
 
Company ID: 111797 - Click Here for Full Details
Product Lines:
Refrigeration Agitation Device.

Next Generation of Energy Savings Device, 40,000 Units Installed Within the First Three Years, Fully Warrantied, and Patented. 
 
Target Markets:
Grocery Stores, Convenience Stories, Food Processors, Data Centers, End-Users, Energy Consultants, HVAC Supply Company, etc. Any Company that Spends to Much on their Electric Bill 
 
Sales Opportunity:
Client Experience:
15% Guaranteed Savings - Average 25-30% Annual Savings
2-3 year Return on Investment - purchase or lease purchase options
Extends life of Equipment
Protects the Environment

Distributor/Sales Representative Advantage:
Unlimited Earnings Potential
No Competitive Products
Online Savings Calculator
Fast and Easy Installation
Excellent Sales, Marketing and Technical Support
 
Company ID: 112428 - Click Here for Full Details
Product Lines:
Industrial Grade AC UPS Systems, Rectifiers, Battery Chargers, Inverters, Semi-Industrial UPS Systems. 
 
Target Markets:
Oil & Gas, Power Generation, Refineries, Petrochemicals, Mining & Metal Industries, Transportation, Water & Wastewater Treatment Plants, Hydro, Marine, Offshore Platforms, Industrial Control Rooms, Engineering & Procurement Companies, Engineers, and Data Centers. 
 
Sales Opportunity:
We are a reputed manufacturing company since 1950s in the product line and is part of well-respected industry leader. We are currently looking for Manufacturers Rep all over Canada. We have thousands of installed base with systems of high reliability, and have service support globally. With the introduction of new system models, this is a unique opportunity for any Manufacturers Rep in industrial electrical/electronics products field. Product training is provided. Pre-sales Technical & Commercial support is provided.
 
Company ID: 96402 - Click Here for Full Details
Product Lines:
Optical SFP & SFP+/QSFP+ Transceivers - from 100Mbps to 100Gbps and beyond.

Also Available: Copper SFP, 1x9, SFF Transceivers & OSA ODM Service. 
 
Target Markets:
* Telecom/Datacom - Manufacturers of Network Equipment
* Cloud Computing
* Data Center
* Industrial Automation/Communication
* Energy Management & Power Plant
* Video Surveillance
* Network Security & Firewall
* Network Interface Device
* LNB Satellite Communication & CATV DOCSIS 
 
Sales Opportunity:
We are a design and manufacturing company located in Taipei, Taiwan. We only manufacture TRx products in-house by our own production facilities (not by contract manufacturers!). We have created many successful stories in Taiwan, Japan, Europe, USA, and Canada for the past twelve years. The reason of success is because we always provide competitive pricing, high-quality, and reliable TRx products to customers. Our products are fully TAA compliant.

We differentiate ourselves from the competitors through our high-performance design and integration capabilities. With the strong faith from our successful record and core-value in the past years, we would like to invite you, a professional Rep, to help us develop US business in the designated areas for the market of Ethernet FTTX, Data Center, and LTE Mobile.
 
Company ID: 109724 - Click Here for Full Details
Product Lines:
Heavy Custom Fabricated Steel
Stainless Steel Pressure Vessels
Super Duplex Stainless Products
Aluminum Fabrication
Wear Resistant Steel Products
Water Jet Cutting Services
Press Brake Forming
3D Modeling 
 
Target Markets:
Chemical Processing Plants
Mining
Petroleum Industry
Ground Support
Power Generation
Paper and Pulp Processing
General Construction 
 
Sales Opportunity:
We are a custom metal fabricator specializing in stainless, super duplex and exotic alloy fabrication. We focus on core values of quality, safety, ethics and customer satisfaction. We have a robust quality system that allows us to ensure that we are producing the highest quality product at all times. We currently hold ASME "U" and National Board of Pressure Vessel Inspectors "R" stamps for shop fabrication and repair.

Our welding expertise is backed up by multiple in-house AWS Certified Welding Inspectors. We can provide precise water jet cutting services as well as precision metal forming. Our capabilities allow us to provide excellent service from initial design through metal processing, fabrication and delivery. Our business has been built on a reputation of providing the best customer service at all times.
 
Company ID: 112067 - Click Here for Full Details
Product Lines:
Dry Type Transformers.

General Purpose and Industrial Control. 50% of our Business is Custom Made Transformers. 
 
Target Markets:
OEM Direct Markets to Appliance Manufacturers, CNC Presses, Medical OEMs, Machine Tool Industry, Large Format Printers. 
 
Sales Opportunity:
We build to what the customer wants instead of taking a cookie cutter approach. The OEM markets can be very large and some of our current customer are buying anywhere from $250,000 to over $1,000,000 per year of transformers. There are OEMs that buy transformers in every single state int he Union. We are over 107 years old so we are not going anywhere.
 
Company ID: 112056 - Click Here for Full Details
Product Lines:
Cutting Edge Industrial, Hazardous Location and Explosion Proof LED Technology. Highest Lumen to weight, ease of installation. Extremely adaptable, adjustable, compact, highly efficient. These robust fixtures with proprietary optics provide light that is an ideal for: 
 
Target Markets:
oil refineries
chemical storage/manufacturing
wastewater treatment
bio-tech clean rooms
food additive manufacturing
pharmaceutical manufacturing
fuel/oil loading terminals
paper manufacturing
natural gas extraction
paint manufacturing
industrial painting
mechanical rooms
OEM 
 
Sales Opportunity:
This is a great opportunity to take a piece of the highly profitable niche segment.
We compete and win on quality and price
10% line
80/20 Overages split to Rep
no minimums
 
Company ID: 112050 - Click Here for Full Details
Product Lines:
Lead Acid Batteries and Emergency Lighting Products. 
 
Target Markets:
Top Tier Electrical Wholesalers and/or Large Security Companies, Large Service Companies that are Involved in the Aftermarket as well. 
 
Sales Opportunity:
We have developed exclusive lines of emergency lighting fixtures and buy direct containers OF both emergency lighting fixtures and lead acid batteries from China. We stock over 12,000 batteries for our own use to our customer base in the life safety business (Fire Alarm Panels) as well as insertion in our own manufactured products. These 2 lines presents a very good opportunity since very few Companies buy direct such products products, normally bought by way of distribution. With our direct purchases we feel a price advantage over currently supplied similar products.
 
Company ID: 108829 - Click Here for Full Details
Product Lines:
Commercial-Grade LED Light Bulbs that are Easily Adapted for Use in Existing T12 and T8 Fluorescent Lighting Fixtures.

Our Products are Designed and Manufactured in the USA, have an Industry Leading Warranty, and a Lifetime Rating that Exceeds most of the Competition by More than Fourfold. 
 
Target Markets:
Our Products have been Specifically Engineered for Commercial/Industrial Applications such as Stores, Office Space, Warehouses, Hospitals, Schools, Gymnasiums, Recreational Facilities, Factories, and Plants. Target Business Owners, Property Managers, Government, Retail, Architects, Contractors, etc. 
 
Sales Opportunity:
The growth curve for LED lighting sales is expected to be $25 billion in the US by 2020. Our products are designed specifically for commercial/industrial applications. If you have a passion for LED technology and understand that not all lighting is the same, we're interested in speaking with you.

Our products have a higher quality of light (CRI) and brightness (lumen) output, and also a life-time rating that is more than fourfold most competing products. Our bulbs allow for direct wire connections, allowing for the ballast to be bypassed. Our bulbs are not the least expensive But will generate the highest ROI.

A Patent Pending circuitry design has eliminated the need for transformers and converters, resulting in fewer components prone to failure and no RF. Our flagship series boasts a 21-year warranty and 190,000 hour life-time rating; it's also the most energy-efficient bulb at 158 lumens/watt. Our entry series has a 10-year warranty and 100,000 hour life-time rating. We can offer a finance option to qualified clients.

The commission structure allows for up to 30%. There's a sliding commission scale that empowers you to negotiate price below retail, when needed. There's an additional incentive based upon monthly volumes. For purposes of calculating the commission, the gross sales price shall include only the charges for the product itself, and shall not include any taxes, shipping charges, interest, or collection-related charges paid by a customer.
 
Company ID: 111725 - Click Here for Full Details
Product Lines:
• Diesel Fuel Test Kit Detects Microbial Contamination in 10 minutes in Fuel Storage Tanks, Vehicles, Marine Vessels, Passenger Ships. Other Tests Take 2-3 days.
• Aviation Fuel Test Kit Detects Microbial Contamination in Business Jets, Helicopters, and Aviation Fuel Tanks. 
 
Target Markets:
• Fuel Storage Facilities, Cell Towers, & Backup Generator Service Companies, Municipalities, Bus/Trucking Companies, Fuel Delivery Companies, Marinas, Diesel Engine Manufacturers, Hospitals, and Nursing Homes.
• Aviation Business Jets, FBO, MRO Facilities, and any Non-Commercial Aviation Market. 
 
Sales Opportunity:
Our company is in Boston, MA is an UK company that has developed a 10 minute diesel and aviation fuel test kit to detect microbial contamination in fuel, aircraft, storage tanks, delivery vehicles, lifeboats, ferries, tugs, military, & passenger ships. Complies with ASTM D8070.

This test panel:
1. Includes free phone App which interprets test, stores results, provides GPS locations and easy to read colored results of red, yellow or green indicating contamination levels of high, moderate and negligible.
2. Only test on the market with results in 10 minutes.
3. Can be performed in the field by technicians with little or no training and with no additional equipment - only need an iPhone with app and test panel.

Testing kits retail for $750/case for 8 individual test kits. Commissions range from 10-25% depending on quantity.
 
Company ID: 52940 - Click Here for Full Details
Product Lines:
Electricity Procurement Services for Commercial and Public Sector Clients. 
 
Target Markets:
Facilities Managers, Business Owners and other C-Level Executives. 
 
Sales Opportunity:
Looking for an easy side hustle? National Energy Brokerage Firm is looking to expand its presence in 14 deregulated states (see territory listing). We offer top commissions and first class sales support. Outstanding opportunity for manufacturers reps that have relationships with business owners or C-Level executives. We provide our services with no out-of-pocket costs to the client.
 
Company ID: 109485 - Click Here for Full Details
Product Lines:
Onsite, On Demand, Base Load or Off Grid Renewable Energy 24/7 at Savings of 30-80% Compared to the Grid.

No Carbon Footprint, No Diesel. Completely New Technology. 
 
Target Markets:
Remote Sites, Governments, Commercial Facilities in Areas where Energy is Expensive. 
 
Sales Opportunity:
Few providers of renewable energy provide power 24/7, without expensive storage. Our systems provide power on demand for less than solar or the grid. Perfect solution for critical services, first responders, remote operations, or anyone who wants to transition to renewables and save money at the same time. Demo sites available.
 
Company ID: 111399 - Click Here for Full Details
Product Lines:
Acoustic Data Recorders
Instrumentation Data Recorders
Bit Error Rate Testers
Telemetry Data Recorders
Telemetry Interfaces
Rugged Data Acquisition
Rugged Time Servers 
 
Target Markets:
Aerospace
Defense
Energy
Industrial
Transportation 
 
Sales Opportunity:
Since 1993, Our company has been successfully developing and manufacturing data acquisition, telemetry and precision timing products and systems for the international aerospace, defense, energy, industrial and transportation markets. Recent success has included the initial sales of ship-borne acoustic data recorders to a few NATO navies in support of ASW.

There's a significant opportunity to market into the remaining NATO navies. We're looking for outside sales partners to sell our existing high-value products, and find new product opportunities for our IP (both existing and new). We have the engineering team, we just need talented and motivated salespeople to fill the pipe.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2018
LINKS | SITE MAP | TERMS OF USE