Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Industrial\Stampings
Click on Company ID to View Full Details
Company ID: 28698 - Click Here for Full DetailsUpdated
Product Lines:
US EPA Tested, Award Winning, Value Added Green Product (Conversion Coating). Eliminates Solvent, Acid, Phosphate, Chromate & Blasting from the Metal Surface Preparation Process.

Completely Prepares the Metal Surface for Welding and Finishing. Provides Years of Indoor Rust Protection. 
 
Target Markets:
Metal Fab, OEM, Car Part Mfg, Machine Shop, Stamping, MRO, High Temp. Coating, Rebar coating, Industrial Supplier, Painting, Powder Coating, Welding, Steel Tank Mfg., Pressure Vessel, Media Blasting, Defense, DOT, Marina, Construction, Utility, Oil & Gas, Mining, Agricultural etc. 
 
Sales Opportunity:
Looking for Sales Rep for Direct selling and through Distributors in USA, Canada & Mexico. Huge market in any industry with no competition. Selling since 1998.

Product developed & Made in USA. Complete "Green Technology & Process". Good Commission rate. Complete Product Training & Technical Support will be provided along with free Product Sample, Brochure, etc. This is the only Conversion Coating which performs multiple jobs in one step and works on any Ferrous & Non-ferrous metal at room temperature without rinsing. Complete metal surface preparation in one step. Eliminates blasting of new metal before Priming/Painting, High Temperature Paint, Powder coating, etc.

The sales Rep must be familiar with Metal Surface Preparation before Finishing such as Priming/Painting, Powder coating. The product has Zero Waste Disposal. Completely solves the Rusting & Long-Term Rust Protection problems, Welding & Adhesion failures. Increases weld strength considerably in steel & Anti-spatter. Eliminates one or more steps from traditional processes, saving a lot of labor, time & cost. Zero Product Cost after use. No EPA or OSHA regulation. Zero Welding & Zero Paint Adhesion failure since 1998. Zero Re-Work. Indefinite Shelf Life.

Our product is being used by major companies, such as DOT, Military Metal Fab., Aerospace, Automotive Aftermarket, Mining, Boat manufacturers, etc. It has been used by Lockheed Martin, Goodrich Aerospace, Bechtel International, DOT TENN, SpaceX, etc.
 
Company ID: 113405 - Click Here for Full Details
Product Lines:
Finding Fantastic Employees is a Major Issue that Businesses Face.

Employee Turnover and Training Costs are a Constant Drain on the Company’s Resources. We have a Positive Solution to Assist with this Issue. Your Customers will love that you are Helping to Solve one of their Greatest Issues. 
 
Target Markets:
Our Program Works for Any and All Businesses or Organizations that have a Need for Both Entry Level and Professional Level Jobs. One Common Issue that all Organizations have is the Need for the Best Employees Available. Our System Gives the Business Entity Options that they have Never Before Had. 
 
Sales Opportunity:
Most business executives agree that our educational system is broken and needs serious improvements. Many company executives tell me that they must spend 6 to 12 months training new hires before they are capable of being productive. Your potential customer base is endless which means your potential income is limitless. You will be selling the business on the concept and program.

This program is so unique and flexible that if the business chooses, they may add this program for free. Your commission will remain the same regardless. Our company seeks to solve the difficult situation that students and businesses face with our current higher education system. The business will get a ready trained employee that they know and as the employee learns can be promoted rapidly taking on more responsibility at a known and controlled cost.

You will be selling a service that is desperately needed and cost that is impossible to beat. The flexibility built into our program assures that it will work for almost all organizations. Once the organization starts to use our system and sees how great it is they will enthusiastically continue and increase their participation.

We will sign an agreement with you for long term protection of your efforts to assure that you do not lose the accounts you develop. This will give you the sales representative the best possible situation for happy customers, limitless income potential, and guaranteed long term income.
 
Company ID: 115416 - Click Here for Full Details
Product Lines:
Plumbing Products
Fixings and Fasteners
Bathroom Cabinets
OEM Products in Steel, Brass, Aluminum, Polymer. 
 
Target Markets:
Factories looking to Produce OEM Products.
Big Wholesalers in the Plumbing & Building Industry
New Products Manufacturing.
Inventors who need help to produce their product. 
 
Sales Opportunity:
International manufacturing company with more than 23 years of experience specialized in OEM products is expanding and looking for Reps for South America, North America, and Canada. We have a rich experience in producing all kinds of OEM products in brass forging and machining, steel, aluminum injection and extruding, polymer injection.

Products can be produced in Europe or in Asia according to the type of products the customer needs. You must be able to provide customers. Based on commission. Sell and make money. We have a branch in Germany and a branch in China. We are a very serious and stable company. Don't hesitate to submit a sales inquiry to us.
 
Company ID: 115249 - Click Here for Full Details
Product Lines:
Made In USA Precision Tools including Squares, Rules, Protractors, Calipers & Dividers, Parallels, Gauges, Edge and Center Finders, and other tools including Tap Wrenches, Punches, Drive Pins, etc. 
 
Target Markets:
Industrial Supply Stores, Hardware Stores. 
 
Sales Opportunity:
We are the manufacturer making precision tools for Mitutoyo and Fowler name brands. To expand the market share we are going to sell our products to stores under our own brand name. Our tools are loved by millions of users since 1960. Our reputation is superior quality at reasonable prices. We offer 10% of net sales as commission.
 
Company ID: 114937 - Click Here for Full Details
Product Lines:
Custom Designed Machines/Equipment such as: Robotics, Semi and Full Automation, Manual Assembly, & Vision Inspection Solutions, etc.for the Manufacturing of Goods.
Machining (Plastics and Metals), Fabrication, and Assembly
Gauge & Fixture Design and Build 
 
Target Markets:
Consumer Manufacturing Businesses: Engineers, Purchasing Procurement, Project Managers, Technicians.
Various Industries: Tech, Consumer Products, Defense, Plastics, Automotive, Electronics, etc. 
 
Sales Opportunity:
We are looking for a sales rep to help us grow our business. We are a automation company located in the heart of the automotive and technology manufacturing center of Ontario. The ideal rep would procure new clients through phone, email, and face to face meetings, with the intent being any new clients submitting RFP/RFQ's for new equipment/machinery or other services offered.

The individual should have a strong background in manufacturing and an understanding of assembly equipment/machinery. They will also be able to pitch various technologies and concepts to potential clients. Contract based on a hourly rate, with commission incentives.
 
Company ID: 88445 - Click Here for Full Details
Product Lines:
We Manufacturer Compression, Extension, Torsion, Double Torsion Springs as well as Wire Forms and Flat Springs. 
 
Target Markets:
Our markets include Automotive, Agricultural, Builders Hardware, Recreation, Electrical, Medical, and other variuos OEM's and Distributors. Calling on both Purchaseing Personnel and Engineers. 
 
Sales Opportunity:
This is an opportuntiy to increase your sales with existing customers and within your territory by selling a related product to your current lines. Ours is one of only 10 spring companies in the U.S. to be registered to ISO 9001 with design. We are aggressive and very competitive. We pay an industry standard 5% commission.
 
Company ID: 60439 - Click Here for Full Details
Product Lines:
Pump Components
Agricultural Bearings for Implements
Bearings
Machined Part & Components
Precision Cut Tubing
Stamping 
 
Target Markets:
Pump Manufacturers, Fan and Motor Manufacturers, Agriculture Equipment Manufacturers, Automotive Suspension Manufacturers. 
 
Sales Opportunity:
We are an IATF 16949 registered manufacturer. We are looking for reps in areas and industries that we don't necessarily do business with. We have been involved in the automotive and bearing industries since we began in 2002 and are now looking to expand into other industries that our products will complement. These industries would include pump manufacturers and distributors, farm implementation manufacturers, fan and motor manufacturers and distributors as well as others.

We are a privately owned company with a deep history and great reputation in the industries we currently provide to. We employ outside sales reps based on an adjusted commision of invoiced sales for production parts. Qualified commisions are paid monthly.
 
Company ID: 110125 - Click Here for Full Details
Product Lines:
Precision Machining Services, General Machining Services, CNC Lathe, Milling Department. Metal Forms, Wire Forms, Springs, CMM Inspection and Reporting, Heat Treating, Material Certs, Surface Finishing, Plating, Anodizing, and Assembly. Specializing in Tight Tolerance, Exotic Featured Parts. 
 
Target Markets:
Aerospace/Defense, Medical Device Manufacturers, Automotive, Industrial Automation Machinery, Optical Device, and Telecom-Electronics Manufacturers. 
 
Sales Opportunity:
Since 1981, SMI CA has been producing precision components in a wide range of materials including Alloy steels, Stainless Steels, Aluminum, as well as exotic material such as Titanium,Inconel using the latest in CNC Machining and manufacturing technologies. Our company is Certified with AS9100C & ISO9001 International Quality Standard. Applications range from aerospace, defense, medical, automotive, optical device, industrial products, and telecom/electronics.

We are part of an international group (STM) focused on a development of world class manufacturing technologies. STM Group includes Toho Seiko, a world renowned precision spring manufacturer located in Japan. Founded in 1957 in Japan as a specialized manufacturer of springs, received high praise from the industries such as medical device, optical equipment, telecommunications equipment, industrial equipment, automotive, consumer electronics, electronic components, etc. because of its technology and quality. We are the hub of customer service, engineering, and production for the US customers.

Currently, we are looking for the rep in the west coast and the east coast. Great opportunity to be the first rep. to market our services. Our pricing is very competitive and our engineer and production team will make sure the project success. We are looking for the long term partnership with the reps and will pay commission as long as the project last. Please explain why you are interested in representing our company.
 
Company ID: 113837 - Click Here for Full Details
Product Lines:
Precision Tooling. Plastic Injection Components, Progressive Stamping, Punches, CNC Turning, Milling, EDM Centerless Grinding, ID/OD Grinding, Hard Turning, and Hard Milling. 
 
Target Markets:
Stamping Houses, Plastic Injection Mold Builders Air Conditioning Tooling, Fin Tooling, Chain Manufacturers, Transmission, and Gear Box Manufacturers. 
 
Sales Opportunity:
Commission Structure is up to Rep. He can bump whatever he feels is necessary.. Non Union shop, We work to very tight tolerances. Familiar with most tool steels. We are a small shop in NY state and are looking to expand our business.
 
Company ID: 113014 - Click Here for Full Details
Product Lines:
Industrial Paints and Coatings. 
 
Target Markets:
Steel Fabricators and Manufacturers of: Steel Gratings, Intermodal Chassis, Truck Trailers, Rail Cars, Steel Springs, Steel Tubes, Conduit, Pre-Cast Concrete, Steel Tanks, Conveyor Belts, Equipment. 
 
Sales Opportunity:
Pruett-Schaffer, in business since 1930, is searching for an independent sales representative to sell industrial coatings in the territory of their choice. Professional Brochures and product catalogs provided by Pruett. Sales assistance and support readily available, including visits to prospective customer sites. Quick response with price quotes. We willingly improvise with product customization to fulfil needs of prospect. US Market for Industrial Coatings already significant is expected to rise.
 
Company ID: 110347 - Click Here for Full Details
Product Lines:
Metal, Plastic, Rubber Parts Custom Made such as Molding, Extrusions, Machining. 
 
Target Markets:
OEMs - Non-Medical Manufacturers or Government Suppliers. I.E. Automotive, Appliance. Some of our existing OEMs are Electrolux, Wilson Trailer, EZ Liner, Winnebago. 
 
Sales Opportunity:
We have many advantages for you to be successful with us. Please submit a sales inquiry us. We like to share the wealth with smart/hard workers. Our company is a very high integrity company based on Competitive commissions, and Longevity. We provide warehousing for their customers so the lead time is 1 -3 days. Exceptional QC Department, 15 Years in the Business, High Integrity, and our Customers come first. We want long term relationships, fair commissions, and commissions that do not lower as sales increase.
 
Company ID: 109866 - Click Here for Full Details
Product Lines:
Recognized Leader in Metal Stampings, Fabrications, Vertical Machining, Welding, Assembly for over 75 years.

Our Company Specializes in Short to Medium Run Metal Stampings, Fabrication, Machining, and Assembly Complement the Product Offering. 
 
Target Markets:
Medical, Aerospace, Agriculture, Automotive, Industrial, Recreational. Our Current Customer Base is National and of High Quality. Reps sell to Global Supply Managers, Product Engineers, and Purchasing Managers. We Currently Manufacture Parts and Assemblies to Major Corporations with Many Current Accounts. 
 
Sales Opportunity:
Represent our product offering on a commission basis. Needs are in the New England area including Western PA, NY, NJ, CT, MA, NH, VT, Maine, MD, DE. There are many existing accounts that are established. I am looking to grow in that market. The selected agency will service two divisions within our company and have an immediate commission base. Our company participates in trade shows and other sales activities to assist in generating leads. This position has the potential to grow the established territory in a very short period of time.
 
Company ID: 40814 - Click Here for Full Details
Product Lines:
We are a China based company who has a Proven Track Record throughout the World.

1. Mold Making, Plastic Molding, & Metal Stamping.
2. PCB Design Engineering, PCB Layout, Rapid Prototyping. PCB Assembly Capabilities include SMT (Surface Mount Technology) & Mixed Technology (SMT + PTH). 
 
Target Markets:
Companies that are looking for Electronic Products, Mold and Molding, Casting Parts that offer Great Quality, Pricing and Customer Satisfaction. Our target customers are OEM Manufacturers Seeking Support in Product Development and Manufacture to Improve their Product Systems. 
 
Sales Opportunity:
Excellent Commission Structure and Protected Territories for Reps. Our company is very stable. We are also looking for reps Worldwide. Submit your sales inquiry for more info.
 
Company ID: 17142 - Click Here for Full Details
Product Lines:
We Manufacture over 1,300 Industrial Specialty Chemicals for Metal Finishing and Phosphating, Metal Working, Metal Cleaning and Re-Manufacturing, Plastic Cleaning, Rust Prevention and Removal, Wastewater Treatment, and Water Treatment Applications. 
 
Target Markets:
Plant Managers, Engineers, Chemists, and Production Managers in All Industrial Manufacturing and Remanufacturing Facilities. Specific Targets include Plants that Machine, Manipulate, Clean, or Paint all Metal and/or Plastics. Other Target Industries are General Manufacturing, Re-Manufacturing, Metals, Food and Beverage, Concrete, Transportation, plus many others. 
 
Sales Opportunity:
Industrial specialty chemicals are a long-term commission opportunity. Products are sold and serviced on a weekly or monthly basis based on sales volume and customer expectations. Commission opportunity is 50% of gross profit margin. Chemical sales and/or service experience is highly preferred, as this is a technical field of which knowledge, experience, and a strong work ethic is rewarded.

This would be an excellent opportunity for both a full-time or semi-retired chemical specialist with built relationships, social ability and chemical problem solving skills. A person would expect to earn $100,000 on $500,000 of yearly sales with our company. Our chemical blending facilities are located in New York, Tennessee, Ohio, Indiana, Texas, and California USA.

Product specialties include: Metal Finishing (All cleaners and deoxidizers, Iron, zinc, and manganese phosphates, Non-chrome and chrome seals, Nanotechnology and non-phosphate pre-treatment), Metal Working (Drawing, Stamping, and Rust Inhibitor Compounds), Paint Strippers, Rust Removers, General Plant Cleaners, Waste Water Treatment, Boiler-Cooling Tower-Closed System Treatments, a full line of Green products, plus many others.
 
Company ID: 29646 - Click Here for Full Details
Product Lines:
Contract Manufacturing in CNC Machining. 
 
Target Markets:
Robmar Precision Manufactures CNC Parts for the Aerospace, Medical, Defense, Energy, Automotive Industries. We Work with OEM's, Tier I & II Suppliers. Robmar likes to Target Customers that can Become $50K+ in Revenues per Year. 
 
Sales Opportunity:
We are searching for talented Sales Professionals who can bring opportunities to the table. We offer excellent support for our sales representatives helping assist you in building long-term/strong relationships with your customers. One way we achieve this is with our unique Inventory Management Program that your customers will be attracted to.

This means repeat business is our goal. Our commission rates are always competitive and open for equitable conversations. You make the contacts and our inside sales representatives will back you up with responsive service in anyway needed. Never letting your customer feel not important, whether information flows thru you or straight from us.
 
Company ID: 97820 - Click Here for Full Details
Product Lines:
Custom Cable Assemblies & Wire Harnesses
Electro-Mechanical Assemblies
PCBA
Overmolding Wire Assemblies
Metal Working 
 
Target Markets:
Automation Industry
Automotive Diagnostic Equipment & Services
Automotive/Truck - Fleet Management
Gaming/Vending Machines Wire Harness
Electronic Contract Manufacturer
ODM Manufacturer 
 
Sales Opportunity:
We commenced our business in 1983, based on the manufacture of custom cable assemblies, and since then have been dedicated to upgrading manufacturing facilities and product range, together with the building of long term supplier/customer relationships.

In conjunction with the cable business we have integrated the manufacture of machined and/or stamped metal hardware, plastic injection parts, connectors, etc. to produce completed electro-mechanical assemblies. Through this process we offer extensive options to meet with customers requirements. This function enhances our range of services to provide our customers with the best solutions required by various industries.

We are seeking career-minded Sales Reps wanting sustainable relationship to promote our products and services in the North america market. Several territories are available. Reasonable allowance and generous commissions are open for discussion.
 
Company ID: 107532 - Click Here for Full Details
Product Lines:
We are a Manufacturer of Deep Drawn metal Components as well as Flat Stampings and Progressive Eyelets.

We Specialize in many Different Grades of Stainless Steel as well as Aluminum, Brass, Copper, and many other Steel Alloys. We also Specialize in Tube Fabrication. 
 
Target Markets:
Hardware, Automotive, Electronics, Medical, and a Variety of Detonator Caps for Military Defense as well as Demolition. We also have a Medical Division that Specializes in Producing Parts that are made of many different types of tubing. 
 
Sales Opportunity:
Our company is an ISO 9001:2008 company. Our deep draw division is capable of drawing to depths up to 2.562 (.1008 mm) deep. The deep draw division also accommodates in line roll threading, bulging, and many different types of piercings. Our stamping division has capabilities to accommodate up to .100 (.0039 mm) thick material and specializes in inline tapping.

Within the Medical division, we also specialize in laser cutting, forming, welding, and many other types of processes. Our Manufacturing facility consists of twenty transfer presses and twenty four stamping presses. We have support equipment that gives us the edge on building all tools within our facility in order to capitalize on lead times as well as cost savings.
 
Company ID: 79311 - Click Here for Full Details
Product Lines:
Metal Stampings, Machined Parts, Plastic Parts Assembly. 
 
Target Markets:
Electronics Industry, Equipment OEMs, Appliance Industry, Automotive, etc. 
 
Sales Opportunity:
Sales opportunities to many varied industries using custom metal and plastic components. Manufacturing support includes over 450 workers, paint and finishing facilities, excellent quality control. Sales opportunities in most territories.
 
Company ID: 101189 - Click Here for Full Details
Product Lines:
Precision Sheet Metal Fabrication:
-- Design Engineering Assistance (10 Fulltime Manufacturing Engineers)
--> Customer Owns Design, we Provide Best Possible DFM.
-- Mechanical Assembly
-- Light Electrical Assembly
-- Supply Management 
 
Target Markets:
Part of the Core Mission of our Company is to be Diversified Amongst Commodities and Customers within Commodities. Telecom, Aerospace, Security ID, POP, Medical, Racks, Enclosures, Audio/Visual Mounting Systems, Agricultural, Automotive, Defense, and Gaming. 
 
Sales Opportunity:
1. Working Ownership
2. Financially Strong
3. ISO9001:2008 Certified and ITAR Certified
4. Our company believes in creating, sustaining, and supporting long - term relationships. Our core vendor base is made up of "primary" and "secondary" vendors that have partnered with us for the long term.
5. We are not a "one type of fab" facility. Our core strength is DFM, quick-turn prototype, and production fabrication up to any level a customer should require.
6. 110,000 square foot facility, state of the art, and climate controlled.
7. Near zero turn over in skilled positions.
--> In-house blueprint training & math classes in an effort to promote from within.
8. Very strong in design engineering input for best possible DFM.
9. Seven (7) Turret Punch Presses, (6) Lasers (3 are 24/7 FMS Systems, with one being a Fiber system), 26 Press brakes, 12 hardware machines, and all the supporting equipment a facility like ours needs.
10. We have a full weld/spot-weld shop, but we stress riveting due to overall cost, strength, and cosmetics.
11. We lean toward press hardware versus extrude/tap, but we do both, having automated tapping in our turrets and stand-alone automated tapping work stations.
 
Company ID: 90812 - Click Here for Full Details
Product Lines:
Laser Cutting Services - We Cut Steel up to .750" Thick, Stainless Steel up to .500" Thick, and Aluminum up to .250" Thick. We have a 4,500 watt ML3015EX Mitsubishi Laser with a Material Handling Unit. Maximum Sheet Size is 60" x 120". 
 
Target Markets:
Industries that we have served in the past include Oil and Gas, Off-Road Equipment, Advertising, Marine, Job Shops, Fabricators, and Various OEMs. 
 
Sales Opportunity:
Our focus is on serving the customer, from prototypes, and short runs to production runs. Quick turnaround on orders is our specialty. We are looking for an agency that can generate a minimum of an additional $500,000 in sales.

We are celebrating our 20th year in business. We have a 15,000 square feet facility with room to expand.
 
Company ID: 65488 - Click Here for Full Details
Product Lines:
Well established Tooling and Equipment Manufacturer.
Areas of Expertise: Design and Build Metal Stamping Dies, Special Machines and Equipment, Automated Lines, Contract Metal Stamping, Precision Machining. 
 
Target Markets:
Major OEM's, Appliance, HVAC, Lawn/Garden, Automotive, Recreation Markets: USA, Mexico, South America. 
 
Sales Opportunity:
We are a well Established Manufacturer of Tools, Dies, Automated Lines, and Special Equipment. Interested in sales representation in geographic areas or industries in US and Mexico. 5% commisions on quoted jobs received.
 
Company ID: 115502 - Click Here for Full Details
Product Lines:
Our Company has Teamed Up with Tool Shops & Part Manufacturers Across the Country Offering Robotics, Machining, Custom Machine Building, Automation, Jigs & Fixtures, Injection Molds, Stamping Dies, & Fabrication.

We have also Teamed Up with Injection Molders and Die Casters for Piece Parts. 
 
Target Markets:
Automotive, Window and Door, Tool, Mining, Aerospace, all Manufacturing, and more. 
 
Sales Opportunity:
Our company is hiring about 60 Independent Sales Representatives (for the United States regions) The sales rep. must have proven and current representation in the industrial manufacturing sector.
 
Company ID: 115364 - Click Here for Full Details
Product Lines:
"Build to Print" CNC Machined Components for Medical Equipment, Semiconductor Equipment Components, Jigs/Fixtures, Tooling Spares, or Ware Parts (Metal Stamping, Plastic Injection Molds, Components for Automation Equipment, and any Wareable Replacement Parts). 
 
Target Markets:
Manufacturers of Equipment, Automation, Automotive Production, Medical Equipment, Bearing Manufacturers, Aerospace Tier 1 and 2 Component Manufacturers, and any Customer Requiring "Build to Print" CNC Manufacturing with the Goal of Cost Savings but World Class Q!uality. 
 
Sales Opportunity:
This is a long term opportunity with reasonable commission to work for a known and proven manufacturer based on best cost region (Thailand). We are already exporting to USA, about 65% of our production.
 
Company ID: 115225 - Click Here for Full Details
Product Lines:
High Speed Progressive Dies and Sub Components, Design and Build. 
 
Target Markets:
Automotive, Industrial, Mil Aero, Medical. 
 
Sales Opportunity:
High-end manufacturer with excellent reputation, good competency, and excellent quality. We have been in business since 1972. We have a tooling division that specializes the high speed dies running in the 20 to 90 tone range. We have experience in dies for electrical connectors, lead frames for electronic modules, and specialty components. We support prototype builds with bridge tools and have experience with many alloys.
 
Company ID: 113391 - Click Here for Full Details
Product Lines:
Fasteners, Hardware, Fittings/Valves, Safety Products, Janitorial Supplies, Cutting Tools/Abrasives, Welding Products, Epoxy, Adhesives, Sealants, Lifting/Rigging Products, Standard Products, Make-To-Print Specials, Domestic/Import Sourcing. 
 
Target Markets:
We have an OEM Side that Sells to Manufacturers of All Types. We also have an MRO Side Selling to Auto Repair Shops, HVAC Companies, Contractors, Schools, Hospitals/Doctors, etc. As our Rep, you will be able to Sell to Whomever you want. Most businesses use Something that we offer. 
 
Sales Opportunity:
Commissions are uncapped, and profitability scaled). We are incredibly creative in our approach, focusing on meeting the customers' requirements and exceeding their expectations, while supporting our Reps every step of the way. We respect your relationship with your customers, and will be grateful for any introductions and opportunities.

We will work hard to strengthen those relationships, and grow your footprint within your customers' supply chain. We know that through fantastic communication we can understand how to best support Your efforts, while treating the customers the way we want to be treated. While we are a fill-in-the gap supplier for most of our Reps, the opportunities are endless, and the "extra" income can be amazing!
 
Company ID: 114755 - Click Here for Full Details
Product Lines:
Metal Stamping Production Services.

We can Design, Build, and Run Stamping Dies to Produce: Metal Parts, Brackets, Clips, Hardware, etc. Up to 300 Ton Stamping Capacity. CNC Machining Services. Punched, Slotted Steel Tubes, Tube Bending. 
 
Target Markets:
Store Fixture, POS Display, Storage, Shelving, Construction, Automotive, Windows, Doors, Garage Doors, Railings, Fencing. 
 
Sales Opportunity:
We have been in business since 1982. We have a 30,000 sqft facility in Toronto, Canada. We have extensive knowledge and experience in manufacturing metal parts. We are looking to expand our customer base and need a good sales rep to help us do that. We are willing to work with you to form a long term, mutually beneficial relationship.
 
Company ID: 114599 - Click Here for Full Details
Product Lines:
As a Custom Metal Fabricator we can Manufacture an Array of Parts.

Our Capabilities are Listed here:
- Machining
- Welding
- Forming
- Finishing
- Laser Cutting
- Rolling
- Grinding
- Engineered Services
- Machine Shop
- Precision Machining
- Product Manufacturing 
 
Target Markets:
Low-Mid Volume Manufacturers (Agricultural, Recreational Vehicles, Home Appliance, Lift Products, Agri-Construction Business), OEMs (Original Equipment Manufacturers). 
 
Sales Opportunity:
Our company has been built on consistent, on-time delivery of our quality products to our customers throughout the United States. Many of our existing customers have been with us for over 25 years for these reasons. They have the confidence that their parts will arrive as scheduled and trust they are made to their specifications.

With new ownership, we are looking to expand and open up new relationships. New team members have been brought in to streamline operations, increase the bottom line through new efficiencies and strategically create marketing plans to build our reputation and awareness in the industry. Even though we have a rich history in this industry, we are constantly looking to improve our quality, production time and costs.

We will provide complete direction and engineering support as well as marketing materials about us and our capabilities. With the ability for low and mid-volume metal fabrication, we are large enough to support new customers, and yet we maintain open lines of communication for our customers and other inquiries.
 
Company ID: 113861 - Click Here for Full Details
Product Lines:
Laser and Isotope online thickness measurement gauges, strip width, and centerline measurement gauges with SPC. 
 
Target Markets:
Metal Service Centers, Hot Mills, Cold Mills, Tier 1 and Tier 2 Metal Part Suppliers. 
 
Sales Opportunity:
We are actively pursuing relationships with reps to help us find opportunities for our products. We are a growing company with the best reputation in our industry for our products, service and support. We are expanding our presence and visibility through new marketing efforts. We have over 20 years of experience in the metals industry. Our people have experience working with and supporting reps to create winning relationships.
 
Company ID: 114253 - Click Here for Full Details
Product Lines:
Manufacturing Consultant. 
 
Target Markets:
Automotive Tier 1 & 2 Suppliers. 
 
Sales Opportunity:
Our Services Provide:
- OEM Supplier wall to wall assessments and gap closure analysis plan.
- Work with high level management team at troubled suppliers to identify and resolve performance issues.
- Resource Leveling - Perform manning assessments and identify detailed roles & responsibilities, and any training requirements or personnel changes.
- We have global access to technical support in all areas of manufacturing Ex. Engineers, metal stamping experts, injection mold technicians, quality engineers, production supervision, logistics, and smelting.
- For the past five years I’ve been fixing companies that are broke (literally), and turning them into profit centers. That’s my passion!
 
Company ID: 114171 - Click Here for Full Details
Product Lines:
Hydraulic Magnetic Circuit Breakers, Stamping Parts, Plastic Injection Parts. 
 
Target Markets:
all states 
 
Sales Opportunity:
Our main advantages are:
1. Flexible payment term
2. MOQ negotiable
3. Life time warranty
4. Short Lead time (10 days) depending on order qty
5. Willing to share investments on new project
6. 10 years history of quality
7. Integrated manufacturing system in house
8. Competitive cost in a low cost area (Western China located)
9. Remote video system to check the factory operation if you need
10. Fast and good service, quick responding
11. Willing to work for you exclusively for projects or product lines or even in the industry
12. CE/UL/TUV listed already for our most products
13. Free samples are ready to be shipped to you for test
 
Company ID: 114096 - Click Here for Full Details
Product Lines:
Mold Bases, Die Sets, and all Components, Punches, Springs, Slides, Lifters. 
 
Target Markets:
OEMs, Tier 1, 2, and 3 Suppliers, Mold and Die Makers, Stamping and Injection Molding Operations. 
 
Sales Opportunity:
Our company is a leader in Mold Sets, Die Sets and all of the components to complete the assembly no matter the difficulty factor. The leader in Metric systems.
 
Company ID: 114084 - Click Here for Full Details
Product Lines:
Hydraulic Shock Dampers to Heavy Metal Stamping Companies. 
 
Target Markets:
VP of Manufacturing, Operations Managers, Process Engineers, Tooling Engineers, Stamping Managers, Maintenance Managers. 
 
Sales Opportunity:
This an opportunity to sell dampers to any stamping house that is experiencing excess vibration and/or noise due to break through shock. No cold calls. No requirement to inventory product. The only shock damper manufacturer in the US. One of only (2) in the world. Supported by our in house tech support group, and sales literature. 10% commission.
 
Company ID: 76416 - Click Here for Full Details
Product Lines:
In Business since 1912, we are a leading Manufacturer of High Volume, Precision Metal Stampings and Assemblies, and the Tooling to Produce Them.

In addition to Precision Stamping we have ~65 Multi-Axis CNC Machining Centers, Laser Welding, Laser Cutting, Metal Finishing, and Pad Printing. 
 
Target Markets:
We Sell to a wide range of manufacturer's and OEM's in the following markets: Medical (Device and Drug Delivery), Automotive, Aerospace,and Consumer Goods. We also sell to Molding Companies that do Insert Molding. We would like to Penetrate the Firearms and Electronics Markets. 
 
Sales Opportunity:
We are looking for Manufactureres representatives in Southeast and West Coast US, Canada, and Mexico. Our company is one of the most respected tooling and metal stamping companies in the country and we are looking to partner with sales organizations that can help us grow and diversify. Being a contract manufacturer we are capable of producing precision parts, on time for any industry. Our engineering and die design departments have the experience and skill to handle the most complex projects from prototype through production.
 
Company ID: 110444 - Click Here for Full Details
Product Lines:
What we can Provide:
• AC & DC Motors and Motor Components
• Gear Motors
• DC Linear Actuators
• Stampings and Metal Assemblies
• Die Castings (Aluminum & Zinc)
• Screw Machine Parts
• Electrical Assemblies/Cable Assemblies 
 
Target Markets:
Typically small to medium sized OEMs, who Build Products and Use these Components. 
 
Sales Opportunity:
We provide engineering, design, sourcing, logistics, and warehousing. We utilize third party inspection services to inspect finished products and sends us a report for our approval. We have offshore production which makes products competitively priced. We offer 5% commission and no-compete protection. There is no company that offers all these benefits in one place.
 
Company ID: 113784 - Click Here for Full Details
Product Lines:
We are a Leading Distributor of Rotating, Stationary, and Fluid Power Products which includes Mechanical Seals, Mechanical Packing, Maintenance Products, and Industrial Lubrication and Coatings. 
 
Target Markets:
Our Product Line can be Used in Any Commercial or Industrial Fluid Application including Hydraulic/Pneumatic Cylinders, Pumps, and Line Equipment. 
 
Sales Opportunity:
Who We Need:
- You are successful at building strong relationships with your customers.
- You have that unique combination of technical background, along with people skills.
- You are a "born persuader", and you love a good negotiation.
- You are an experienced sales professional with a proven record of outperforming the competition.
- You live in Middle Tennessee or the Chattanooga Area.

How about working at a company:
- That was started more than 40 years ago and whose business is still growing.
- That is family-owned and managed by successful, strategic, personable leaders who know your name and welcome you as part of the “family”.
- That gives you a formal on-boarding program to get you on a fast path to success.
- That has people who are fun, smart, engaged and like working together to bring “Best in Class” service to our customers every day.

Job Summary:
Provide sales, service and technical support for a specific end-user sales territory. Develop and implement territory sales strategies. Responsible for meeting sales and gross profit objectives. Provide and direct the tactical execution of conceptual sales strategies and implementation of contractual agreements. May be required to obtain TWIC (Transportation Worker Identification Credential) from the U.S. Homeland Security.

We offer an aggressive compensation package that includes salary with performance-based commission and expenses.
 
Company ID: 113467 - Click Here for Full Details
Product Lines:
Gaskets, Seals, Waterjet Cutting Services, Prototyping. 
 
Target Markets:
Small Engine, Automotive, Medical, Military, HVAC, Industrial, Recreational Vehicles, Agricultural, almost any Industry or Market. 
 
Sales Opportunity:
Our company has never used sales reps before. We know that our reputation will yield great results when partnered with a seasoned and experienced Sales Rep. Our high tenured operations and admininistration have built our fantastic reputation in the gasket industry. Our competitive advantages: Great reputation, great team of folks that get the job done, can produce large volume and small volume. We use lean manufacturing practices and are ISO Certified.
 
Company ID: 110515 - Click Here for Full Details
Product Lines:
Our Staff have the Nation's Leading Full-Service Stimulus Consulting Firm Specializing in Local, State, and Federal Incentives.

To Date we have Assisted in Securing Over $500M Through our Custom Consulting Process. Take your Business to the Next Level. 
 
Target Markets:
CEO/CFO, We are Proud to be in Partnership with Two Full Service Stimulus Consulting Industry Leaders who Provide Proprietary Savings for Employers, Manufacturers, Commercial Property Owners, Restaurants, Medical Facilities, Auto Dealerships, Professional Services Groups, Associations, and more. 
 
Sales Opportunity:
Direct competition is limited and products have strong customer retention. We are on track to double our client base! Individual agents and principles have access to proven brands with a 14 year track record. The company certification process includes complete on-line training with dedicated inside sales support.

Individual agents or sales teams can leverage recognized brands. We service four Sales Channels and provide multiple revenue streams for the right candidate, including nearly instant commissions with residual income. Individual revenue goals for a new agent/agency varies on level of effort and individual skills, by utilizing our proprietary lead generation program.

We have a proven sales process. New advisors sales tools include personalized e commerce sites for product review and 24/7 on-line order entry, drip marketing campaigns with a prospect manager, branded literature, white papers, and educational tools. Our advisors utilize traditional go to market strategies and capitalize on the automated systems and lead generation tools provided by the company. Our expertise can be used a stand alone service or a premium add on service for the multi-line representative or principle.
 
Company ID: 113194 - Click Here for Full Details
Product Lines:
We are a CNC Machining and Turning Manufacturer.

We are Specialized in the Production of Precision Parts. We are a Hong Kong Registered Company with Branch Office in Shenzhen and factory in China. Staffed by a Highly Qualified Team of Design, Production, and Quality Engineers. 
 
Target Markets:
Companies in the Aerospace, Medical, and Industrial Segments that Needs CNC Machining and Turning Parts for their Products. 
 
Sales Opportunity:
Our company have strong engineering support and capable in making complex parts at a competitive price. We also have experience working on turnkey projects including die casting, plastic injection molding and sheet metal stamping. We have been supplying products to various listed companies in the US. Marketing materials will be provided to you for promotion. Generous profit sharing scheme up to one third of the net profit will be awarded for sales order closed. Commission will be calculated as long as there's an order.
 
Company ID: 113184 - Click Here for Full Details
Product Lines:
Custom Made Precision Machined Parts and Assemblies Produced on Conventional as well as CNC/VMC Machines.

We are already Exporting our Products to many European Countries and the US. 
 
Target Markets:
Automotive, Aerospace, Defense, Hydraulics, Process Control, Electrical, White Goods Manufacturers as well as Big Distributors for Non-Standard Parts. 
 
Sales Opportunity:
As we are already exporting to the US, we have fair understanding about the market requirements. We can offer extremely competitive pricing (thanks to our innovative manufacturing approach and lean management) to win orders. We work purely on commission with our representatives. The commission percentage varies between 5.00% to 7.50%, depending upon the quantum of business, profitability and efforts required.
 
Company ID: 113141 - Click Here for Full Details
Product Lines:
Laser Cutting, Metal Bending, Metal Forming, Stamping, CNC Machining, Powder Coating, CNC Punching, Welding and Assembly. 
 
Target Markets:
Engineers, Manufacturing, Machine Shops. 
 
Sales Opportunity:
Our company has been family owned and operated from day one. We are committed to manufacturing and engineering high quality products and services. With a wide range of metal fabrication services, including CNC Laser and CNC Lathe Machining. We have a very competitive prices with quicker turnaround times. Reps are supported with a 10% commission on all sales.
 
Company ID: 110673 - Click Here for Full Details
Product Lines:
Metal Stamping Presses. 
 
Target Markets:
Metal Stampers. 
 
Sales Opportunity:
Sell new technology metal stamping presses to metal stamping companies.

Longer tool life
Better quality parts
Adiabatic process
Less burr
Flatter parts
Edge quality
 
Company ID: 112924 - Click Here for Full Details
Product Lines:
We Manufacture more than 2,000 SKUs for the Electrical, Plumbing, and Industrial Segments.

We Provide Casting, Machining, Stamping Operations for Diversified Alloys in Copper, Zinc, Aluminum, Steel, and are now Investing in Iron. UL & ISO 9001 Certified. 
 
Target Markets:
Large and Small Public and Private Companies in the Electrical, Industrial, Plumbing, Oil & Gas, Power Generation/Energy, and some Automotive Applications. 
 
Sales Opportunity:
We are looking for experienced sales reps that can bring in a diverse customer base in the industry sectors mentioned above. Our organization is a flat organization and you will be dealing with me and one other individual in the Company. We are looking to grow revenues of this Company by an incremental $5M to $10M within 12 months and be at that pace for the next 3 years.

The Company has a history of 30+ years as a reputed supplier for a lot of recognized names in the electrical, plumbing and industrial sectors and we would like to leverage this rich history and demonstrated success to take the Company to its next stage of growth.
 
Company ID: 112917 - Click Here for Full Details
Product Lines:
- CNC Wire Bending Machines
- Automated Wire Forming Automation Cells
- Automated Nylon and PVC Coating Lines for Wire Forms and Springs 
 
Target Markets:
- Automotive Tier 2
- Lawn And Garden
- Appliance
- POP
- Any Metal Fabricating Job Shop 
 
Sales Opportunity:
We are a rapidly growing company in which the principals have been in the industry for decades. We are looking for Rep coverage in the south and in the Michigan, Indiana area. We have multiple niche product lines and have the product for many industries, we just need the boots on the ground to find the clients.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2019
LINKS | SITE MAP | TERMS OF USE