Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Products by Material\Gas / Oil / Petroleum Products & Services
Click on Company ID to View Full Details
Company ID: 28698 - Click Here for Full DetailsUpdated
Product Lines:
US EPA Tested, Award Winning Green Product.

Performs Multiple Jobs in One Step. Eliminates Solvent, Acid, Phosphate, Chromate & Blasting from the Metal Surface Preparation Process. Completely Prepares the Metal Surface for Welding and Finishing. Provides Years of Indoor Rust Protection. 
 
Target Markets:
Metal Fab, OEM, Car Part Manufacturer, Machine Shop, Stamping, MRO, High Temp. Coating, Rebar Coating, Industrial Supplier, Painting, Powder Coating, Welding, Steel Tank Manufacturers, Pressure Vessel, Media Blasting, Defense, DOT, Marina, Construction, Utility, Oil & Gas, Mining, Agricultural, etc. 
 
Sales Opportunity:
Looking for Sales Rep in USA, Canada & Mexico. Also, Exclusive Distributor for other countries. Huge market with no competition.

Product developed & Made in USA. Complete "Green Technology & Process". Good Commission rate. Complete Product Training & Technical Support will be provided along with free Product Sample, Brochure, etc. This is the only Conversion Coating which performs multiple jobs in one step and works on any Ferrous & Non-ferrous metal at room temperature without rinsing. Complete metal surface preparation in one step. Eliminates blasting of new metal before Priming/Painting, High Temp. Paint, Powder coating, etc. Provides much better quality results.

The sales Rep must be familiar with Metal Surface Preparation before Finishing such as Priming/Painting, Powder coating. The product has Zero Waste Disposal. Completely solves the Rusting & Long-Term Rust Protection problems, Welding & Adhesion failures. Increases weld strength considerably in steel & Anti-spatter. Eliminates one or more steps from traditional processes, saving a lot of labor, time & cost. Zero Product Cost after use. No EPA or OSHA regulation. Zero Welding & Zero Paint Adhesion failure since 1998. Zero Re-Work. Indefinite Shelf Life.

Our product is being used by major companies, such as OEM, DOT, Military Metal Fab., Aerospace, Automotive Aftermarket, Mining, Boat manufacturers, etc. It has been used by Lockheed Martin, Goodrich Aerospace, Bechtel International, DOT TENN, SpaceX, etc.
 
Company ID: 105239 - Click Here for Full DetailsUpdated
Product Lines:
We Provide Industrial Fluid Handling Equipment of All Types.

This includes transfer equipment with brand names including: Walther Systemtechnik, PERFECTFLOW®, Graco, Lincoln, OPW, Samoa, Samson, Yamada, Japanese Industrial Filters, Macnaught, Midwest-Controls & Binks/Devilbiss. 
 
Target Markets:
Original Equipment Manufacturing (OEMs), Automotive, Mining, Oil & Gas, Chemical, Process, Maintenance & Repair Organizations, Industrial Finishing,Hydraulic Systems, etc. Any Company that Uses Fluids in their Business Activities. 
 
Sales Opportunity:
Our company is a 54 year old fluid handling equipment distributor outside of Chicago looking for qualified independent sales professionals to help us continue to grow. Ideal candidates are already established with a book of business in the fluids industry such as lubricants, coatings, adhesives, resins, mastic's, or similar products. Let us compliment your business with a unique profit based compensation package that could exceed six figures for the right individual. Residual earning potential too! Help us write the story of our next 50 years & establish your legacy to boot!
 
Company ID: 113435 - Click Here for Full Details
Product Lines:
Concrete Sealer.

Our Flagship Product has been in Use for 20 years Worldwide. Permanent Protection From Salts and Freeze/Thaw Cycles. Incredible Savings Over Repair/Replace Options. A Clear, Environmentally Friendly Water Based Sealer that is Easy to Apply. 5 Gallon Pails or 55 Gallon Drums. 
 
Target Markets:
Departments of Public Works, Departments of Transportation, City and Local Governments, Municipalities, Engineers, Architects, Maintenance Supervisors, Commercial Landlords, Property Management, Plants and Warehouses, Salt Storage Facilities, Public Facilities 
 
Sales Opportunity:
Our unique sealer is a permanent, one-time application to get 20 extra years or more out of concrete. It hardens, densifies, and penetrates deep into the pore structure and will save literally tens or hundreds of thousands of dollars over the life of the concrete in repair and replacement cost. Cities, towns, municipalities that have an annual budget to replace their bad concrete will love our permanent solution.

Use the first year's replacement budget to treat all your sidewalks, public entrances, etc., and then save the next fifteen years' budget to do something else with! If you have contacts in these areas, they will thank you for this money-saving product. We have a solid track record and plenty of testimonials and referrals, as well as plenty of marketing collateral to support sales.

Our team is always available to discuss a client's needs, work out a proposal, and give you all the support you might need. Our interest is in finding reps who are already servicing these areas to introduce our solution to those who will benefit most. Our tiered pricing leaves plenty of room for you to make good money, as our typical contract ranges from $4k to $60K or more. Submit a sales inquiry to us if the product seems like a fit, and let's go!
 
Company ID: 115732 - Click Here for Full Details
Product Lines:
Pipe Supports, Pipe Isolating Barriers, Cryogenic Pipe Supports, LNG Pipe Supports, Easy to Install,"Lift-Off" Pipe Supports, Patented. 
 
Target Markets:
Engineers, Construction Contractors, Maintenance Engineers, and Supervisors, Oil and Gas Upstream, Downstream, Chemical plants, Utility companies, offshore, food and beverage, mining, marine, Government, DOD, DOE, LNG. Basically Anywhere where Pipes Need Supporting. Storage Tanks and Tank Farms. 
 
Sales Opportunity:
A brand new and unique Pipe support design. Proven materials and design. Patented. Worldwide market. Supplements existing designs. Easy to install. Huge volume can be sold. Great commissions. Possible share holding. No volume restrictions. Total installed cost beats anyone in the industry. Must have process/chemical/utility piping experience.
 
Company ID: 114439 - Click Here for Full Details
Product Lines:
Gator Grip Socket, Contract Machining, Mouse Traps, Mechanical Pencils. 
 
Target Markets:
Hardware Stores, Retail Stores, Manufacturers, Lumberyards. 
 
Sales Opportunity:
We are a medium sized company selling to a large customer list of highly recognizable names. We have capacity to produce more product in each category and we have a robust operations and systems group. Our on-time shipping performance is routinely 100%. We ship 50,000 parts/items per month and have had no returns in 11 years.

Many of the parts we make in our machine shop operation are assembled and packaged on-site, helping our customers. We are constantly adding to our product offerings and reducing our costs to stay competitive. We would certainly like to find some reps to help us get our innovative products into the market.
 
Company ID: 109801 - Click Here for Full Details
Product Lines:
Custom Designed Control Dampers and Fabric Expansion Joints for Industrial and Power, and Process and Applications.

Butterfly, Louver, Diverter, Zero Leak Guillotines Expansion Joints. Temperature Ranges up to 1,500 degrees. We have a Patented design on our Guillotine Damper. 
 
Target Markets:
Flextech Products are Utilized in the following markets:
Steel
Petrochemical Industries
Cement
Pulp & Paper
Air Pollution Control Systems
Fired Heater Systems
Power Generation
Chemical Industry
Contractors
Engineering Firms 
 
Sales Opportunity:
Our company has a competitive pricing structure with our main competition. Our company provides and maintains solid communication with our representatives and makes a sales presence in the representatives territory. Commission scale to be discussed personally.
 
Company ID: 115177 - Click Here for Full Details
Product Lines:
Industrial Lubricants for Heavy Machinery:
- Engine Oil
- Grease
- Hydraulic Fluid
- Transmission Fluid
- Gear Lube
- Fuel Conditioners
- Industrial Cleaners 
 
Target Markets:
- Agriculture
- Trucking
- Mining
- Construction
- Manufacturing
- Municipalities
- Any company with heavy equipment 
 
Sales Opportunity:
- Be your own boss and set your own schedule
- No commission cap
- Sell a product that you can stand behind
- Sell a product that is consumable
- Same commission structure from the first to last sale, from smallest to largest accounts.
-Excellent and on going training

We provide world class durability and put money back into our customers pocket by reducing downtime and increasing fuel economy. Our product is second to none in the industry. We have extensive research and customer testimonials to back that up.
 
Company ID: 115107 - Click Here for Full Details
Product Lines:
Unique Line of Graffiti Removers and Degreasers. Very Effective and Biodegradable. 
 
Target Markets:
Municipalities, DOTs, Commercial, and Petrochemical Markets 
 
Sales Opportunity:
Our products are the most effective in the marketplace, developed by a chemist in the 1970's and sold locally for more than 45 years however the prior generation never expanded. Now under new management we would like expand our horizons and share our products in new geographies. Very high commissions paid, very high commissions paid!
 
Company ID: 114757 - Click Here for Full Details
Product Lines:
Our Representatives will be Selling the following Products:
7oz and 9 oz FR Armour Ready Coveralls
Armour Ready FR Insulated Parkas and Bibs
Armour Ready FR Insulated Vests
Armour Ready FR Zipped Hoodies
Other Armour Ready Accessories 
 
Target Markets:
All Industries that Utilize the Need for Personal Protective Equipment particularly:
• Oil and Gas Industry
• Construction
• Leisure 
 
Sales Opportunity:
Come be a part of Armour Ready and help to reduce Injury. Help people to protect themselves, protect their employees, increase employee productivity, and reduce the cost of lost time claims. Our ideal candidate will be organized, ambitious, self-motivated, and interested in joining an aggressive sales team

Job Title: Regional Sales Representative

Job Responsibilities & Duties:
The successful candidate will be responsible for establishing contact with existing customers, identifying new opportunities, and following up on potential leads in their region. They will also monitor industry trends in order to identify emerging markets and develop plans to utilize those markets to expand revenue. If you have prior experience in outside sales and a desire to expand your career, we want to hear from you.

Skills And Qualifications:
• High School Diploma or equivalent
• Criminal Record Check
• Excellent communication, interpersonal, organizational and time management skills
• Proven negotiation skills
• Dependable
• Meets Sales Goals
• Product Knowledge
• Bilingual in French and English an asset
• Mobility to travel within your assigned territory, manage your own schedule and work independently in pursuit of team goals.
• Possess a hunting and positive winning attitude
 
Company ID: 114686 - Click Here for Full Details
Product Lines:
We are Looking for Independent Sales Representatives who want to Start Selling our Composite Structural Lumber Solutions to Commercial Clients. 
 
Target Markets:
Our Customers are Commercial Businesses in the Marine, Agriculture, Industrial, Equine, Parks & Recreation, Fencing, Landscaping, and OEM Industries. You would be Calling on Commercial Contractors, Engineers, Architects, City and State Officials, Industrial and Agricultural Businesses, and OEMs. 
 
Sales Opportunity:
Founded in 1998, we are the leading manufacturer of premium, structural and reinforced plastic lumber for commercial markets, including marine, agriculture and industrial and other outdoor markets. This is a commission-only position with no cap on your potential earnings. We will provide you with product training, sales and marketing support. If you are ready to take the next big step in your sales career that allows you to control your own success, financial security, and independence, we want to talk with you.

Here Is Some Of What We Have To Offer:
- High earning potential, with no cap on sales commissions.
- Product line of premium, structural and reinforced plastic lumber that delivers customers superior ROI and an environmentally sustainable solution.
- In-field product training.
- National marketing campaign for lead generation sales.
- Cutting edge, trendsetting technology products.
- A never ending marketplace with a multitude of industries served.
- Full office support to help you succeed in a niche market.

Job Requirements: As an Independent Sales Representative, you must be highly self-driven with an exceptional work ethic and a strong drive to succeed. It is also important that you have excellent verbal and written communication and interpersonal skills, as well as a commitment to superior customer service and willingness to go see and present to prospective customers.
 
Company ID: 113234 - Click Here for Full Details
Product Lines:
Thermal Mass Flow Meters and Controllers 
 
Target Markets:
Oil and Gas, Chemical/Petrochemical Processing, Analytical, Food & Beverage, Pharma, Automotive/General Manufacturing, Subsea, Industrial Vehicle, Marine, Fluid Power, Bio Tech, Life Sciences, Research Labs, Universities, Energy, Surface Treatment/Coatings. 
 
Sales Opportunity:
Our company AW-Lake ("Vogtlin" brand Thermal Mass Flow Instruments) is seeking additional established Representatives throughout the Americas. We offer territorial exclusivity and generous compensation. We are seeking representation for parts of the Midwest, South, New England, Canada, Mexico, Central and South America.
 
Company ID: 106219 - Click Here for Full Details
Product Lines:
Process Sensors for Manufacturing Companies.

Such as: Food Processing Companies, Chemical Processing Companies, Consumer Goods Companies. We can Measure: Moisture in Powder, Color in Powder, Powder Blend Homogeneity, Color in Liquids, Contaminants Liquids. We have all Industry Certifications. 
 
Target Markets:
Food Industry: Dry Goods: Examples: Packaged Cracker, Cookies, Cereal, Ice Cream, Flours, Breadings/Batters, Cheeses, any and all Packaged Food Products.
Chemical Industry: Coatings, Plastics, etc.
Consumer Goods: Soaps, Lotions, Makeup, Shampoos. 
 
Sales Opportunity:
We have developed a new category of in-line process sensors for industrial manufacturing. We eliminate lab samples, time based measurements, and waste with real time continuous in-line measurements in solids, and liquids. No other company can provide a simpler yet proven method for process manufacturing.

We are actively searching for an aggressive rep or rep group to expand our customer base. We pay a strong commission and provide reps with marketing collateral, technical support and on-site visits to close deals. We are actively searching for an aggressive rep. or rep. group to expand our customer base across the U.S. and offer extensive support.
 
Company ID: 97590 - Click Here for Full Details
Product Lines:
100% Natural Fertilizers with Micelle Technology.

OMRI Certified Organic Cleaning Product for the Oil Industry, Pet Wash, and Pesticide Industries. 
 
Target Markets:
Growers of almost Any Crop. 
 
Sales Opportunity:
Our product line is a new technology that is breaking yield records all over the United States. Growing a healthy plant as well as taking care of our environment is important for everyone. We currently are working with growers from some of the biggest companies in the U.S.

We are also doing business globally with helping plants produce more yields than ever before. We started small and are growing at a tremendous rate. We would like to see if you’re a good fit to help our company become a household name. Thanks for your time.
 
Company ID: 112016 - Click Here for Full Details
Product Lines:
Technical Consulting, Contract Testing, and Analytical Lab Services.

Manufacturers Representative Company Offers One-Stop-Shop Solutions for Analysis, Characterization, Measurement, Testing of Materials and Devices for Academic, Commercial, Industrial and Governmental Clients. 
 
Target Markets:
B2B Selling to Clients in Every Possible Industrial Sectors: Automotive, Chemicals, Electronics, Medical Devices, Pharmaceuticals, Semiconductors. The Clients could be in Any Phase of a Product Cycle: R&D, New Process Optimization, Failure Analysis, Quality Control, and Legal Investigations. 
 
Sales Opportunity:
We are a nanotechnology service and development company with over 10 years of successful business. It is our ongoing commitment to serve international communities through our broad range of first-class products and services.

Our Nano Analytical and Testing Laboratory provides comprehensive, advanced and critical analyses, measurements and tests of materials and devices. We deliver reliable and quality solutions for clients’ analytical and testing needs whether they are for high-level technical consulting or project driven contract lab services or capital equipment.

Our company is ISO/IEC 17025:2005 accredited! The ISO 17025 accreditation gives our lab international recognition on our testing and measurement competencies. It provides our clients another level of confidence in our excellent quality lab services.

We hope to expand and share our success and growth with commission based sales and marketing professionals and agencies. The instrument products, technical consulting and contract lab service portfolios are well-designed and market-proven solutions to clients' challenges and issues. All we need is to have the messengers to spread the words and to offer the solutions to the needing clients.

Our products are best-value, advanced and high quality. Our lab is equipped with state-of-the-art instruments. Our staff are college educated professionals with many years of experience. We will provide marketing and sales support, and training for your success.
 
Company ID: 112048 - Click Here for Full Details
Product Lines:
Factory Packaged Double Wall UL Listed Day Tanks, Pump Sets, and Control Panels, ASME Vessels Manufactured in Sizes 10 Gallons to 50,000 Gallons. 
 
Target Markets:
Data Facilities, Nursing Homes, Fire/Police Departments, Contractors Who will be Installing a Generator or Boiler. "Mission Critical Environments". 
 
Sales Opportunity:
We are a small family owned company in business since 1998. We have the ability to install our products for a turnkey single source responsibly. We design and manufacture systems for power generation and liquid automation. Commission structure on products ranges from 15%-10% average project is $25K.
 
Company ID: 108835 - Click Here for Full Details
Product Lines:
Lubrication Equipment such as: Pumps, Hose Reels, Nozzles, Meters, etc., a Complete Solution for Oil, Grease, DEF, Fuel, Air, and Water. 
 
Target Markets:
Equipment Distributors such as Fuel, Oil, Grease, and DEF Equipment Resellers, Oil Companies, Fleet Supliers, etc. 
 
Sales Opportunity:
We are a new brand for lubrication equipment which has in its background over 50 years in the fluid handling marketing. With products manufactured in Italy. We offer the most complete line of products with high quality and very competitive price. Besides all that, with over 50 years of knowhow, we offer any help the Reps will need in order to do a good job, even though he/she has never worked with this type of equipment. Our experience allows us to provide sales training, share our successful cases, and much more.
 
Company ID: 110908 - Click Here for Full Details
Product Lines:
Custom Blends of Aqueous & Flammable Liquids, Emulsions, Liquid/Powder Dispersions.

High Viscosity, High Temperature. Batches from 50 Gallons to 10,000 Gallons. Toll Contracts for Customer Supplied RM's or Turnkey Full Service Supply. Packed in 45 Gallons Drum and Upwards to Tank Truck Quantities. 
 
Target Markets:
Personal Care, Soaps and Detergents, Textiles, Plastics and Polymers, Auto Industry. Specialists in Silicone and Silane Blended Products. Paints, Inks, and Coatings Intermediates. Belt and Drum Flaking. Purification by Wiped Film Evaporation. 
 
Sales Opportunity:
We pay a one off finders fee for each qualified lead plus an ongoing commission based on size and duration of business generated. Commissions paid monthly. Will consider monthly retainer after 3 months.
 
Company ID: 108041 - Click Here for Full Details
Product Lines:
Precision Industrial Temperature Sensors and Accessories including Thermocouples, RTDs, Thermowells, Protection Tubes, Wire, Fittings, Indicators, Controllers, and Components. 
 
Target Markets:
Power Generation
Chemical
Oil & Gas
OEMs
MRO
Pharma
Food & Beverage
Material Processing
Forging
Mills 
 
Sales Opportunity:
Our products are used in almost every industry around the world. Recurring sales due to consumable nature of our products. Technical Expertise and excellent service focusing on guiding our Reps with all inquiries, ultimately providing success to both parties. Growing company seeking a partner to grow with.
 
Company ID: 96119 - Click Here for Full Details
Product Lines:
We Manufacture Forged Steel Products for the Automotive, Heavy Truck, Heavy & Light Industrial, & Oil and Gas Industries.

Our Engineering Department can Design a Wide Variety of other Products within our Forging Operation to meet the Needs of almost any Company looking for Quality Forged Products. 
 
Target Markets:
Reps will be Calling on the Major Oil Companies & Independent Field Service Companies. We are also Interested in other areas, including the Major Tier I & Tier II Automotive Suppliers as well as Agricultural and Industrial Fields that are in Need of Hot, Warm, or Cold Forgings. 
 
Sales Opportunity:
Our company is one of the largest forgers to most industries using forged products. We have a great team of engineers with years of forging experience to ensure we are putting out quality, well priced products. We have the capabilities to design products to our customers specification. We pride ourselves on making the best quality product totally Made in the USA. We are ISO 9001:2008 compliant

** Please include companies currently calling on or previously called on in resume after we contact you.
** Successful sales record involving forgings is required.
 
Company ID: 113584 - Click Here for Full Details
Product Lines:
Nano-Coatings

Innovative and Exclusive Product, NATF. Provide Cost Savings while Reduces Downtime in Maintenance Processes for Companies. Avoid Electrical Failures and Malfunctions Great Returns on Sales. 
 
Target Markets:
Targeted Market: Marine Industry, Boat Repair & Maintenance, Electrical Boat Repair, Marinas, Boat Accessories Suppliers, other Industries, Military. The Company Provides Protected Leads. Other markets and Industries can be Considered. We are Able to Provide All Kinds of Surfaces Treatments. 
 
Sales Opportunity:
Ours is one of the leading companies on the manufacturing and distribution of nano-coatings, operating since 2010 on the major USA markets. Our company is looking for Sales Reps who are energetic and motivated to join our Team. Must be able to handle large volume of leads. Previous experience in a sales role and Knowledge of Marine Industry (Boat Maintenance and Repair & Retail) is an advantage.
 
Company ID: 88677 - Click Here for Full Details
Product Lines:
Our Product Snaps Onto 8, 12, and 16 ounce Beverage Cans Converting a Can into Longneck Bottle.

Eliminates Aluminum Can Taste Associated with Drinking from a Can, Eliminates the Sloshing of Liquid from an Open Beverage Can, Reduces Spills. The Lid Helps to Eliminate Bugs, Bees, Dirt, and Sand. 
 
Target Markets:
Beach Gift Retailers, Convenience Stores, Boat Dealers and Marinas, Golf Retailers and Pro Shops, Collegiate Retailers, Motorcycle Dealers, Auto Parts Retailers, Retail Grocers, Big Box Stores, Children's Product Retailers, and more. Sales Potential Lnly limited to the Reps Creativity. 
 
Sales Opportunity:
In offering our product to manufacturer Reps, we are giving Reps an opportunity to offer a product that is unique, cool, fun, and very functional. The product is very new to the retail industry and promotional products industry. It is manufactured in the USA!

Competitively, it is the Only product on the market that turns a can beverage into a longneck bottle. We support our Reps with beautiful 4 color sell sheets, aggressive pricing, and dedication to ship orders in a timely manner. We offer a very aggressive commission structure based on sales volume and the escalated commissions are retroactive.

While we manufacture twelve (12) popular colors of this product, there are truly six (6) that are Most popular and we offer these in our case pack. Some areas may have a popular grade school or college within the area and the team color(s) may sell the best. Our Rep customers have the right at no additional charge to mix and match colors. Our new retail blister packaging is very attractive and product information on the insert is informative.

Seasonal product you might wonder - absolutely not! This product sells great year round. Great as a stocking stuffer because it is unique. Last but not least, very importantly is that it appeals to consumers of all ages so when in a retail setting, many times multiple items are purchased by a consumer.
 
Company ID: 116204 - Click Here for Full Details
Product Lines:
Pressure Sensors, Transducers, and Transmitter Products for HVAC/R, Air Compressors, Water Pumps, Various Industrial, Medical, and Automotive Applications. 
 
Target Markets:
- Medical
- HVAC/R
- Air Compressor
- Water Pump
- Various Industrial
- Automotive 
 
Sales Opportunity:
Ours is a Silicon Valley, CA based company founded in 2014. Our leadership and many members of our engineering staffs have a long track record in the MEMS pressure sensor industry. We offer high-performance OEM pressure sensors, transducers, and transmitters, which are hermetically sealed and compatible with harsh media. Our pressure sensor products do not require isolation from the media that are being measured, unlike traditional-type packages that require welded metal membranes and cavities to be filled with oil.

The simpler construction of our pressure sensing solution, which is based on our patent-pending MEMS packaging technology and eliminates the above-mentioned welding and oil fill, results in a higher performance, a higher reliability, and the possibility to miniaturize without loss in accuracy. Our low-cost OEM pressure sensor can be manufactured in standard packages and can also be customized to fit any specific application for which we recommend you to work with one of our Custom Engineering specialists.
 
Company ID: 116146 - Click Here for Full Details
Product Lines:
Control Instrumentation, Control Valves and Regulation Equipment for Natural Gas Transmission Pipelines and Gas Utilities.

Our Products Feature Environmentally Friendly Solutions to Minimize or Eliminate Fugitive Gas Emissions. 
 
Target Markets:
Natural Gas Transmission Pipelines
Natural Gas Utilities
Natural Gas Midstream Companies
Natural Gas Producers
M&R Equipment Skid Builders and Fabrictors
Other Natural Gas Equipment Sales Representatives and Manufacturers 
 
Sales Opportunity:
Be a part of one of the most progressive and fastest growing teams in the natural gas industry. Started in 2012, our conpany has grown to be a market leader in design and manufacture of natural gas control valves, control instrumentation and regulation solutions. We promote environmental responsibility by providing unique solutions to mitigate or eliminate fugitive natural gas emissions. It is not often that new and successful manufacturers and new products are presented in the natural gas industry. Take the opportunity to be a part of our team.
 
Company ID: 116130 - Click Here for Full Details
Product Lines:
Our Core business is Online Leak Sealing.

This Service Repairs Steam, Water, and Chemical Leaks Without the Plant having to Stop Operations to Make the Repairs. Our other Division is Industrial Coatings. We Install Engineered Carbon Fiber Repairs on Tanks, Pipe, Sump Pits, and Structural Concrete. 
 
Target Markets:
Reps will be Selling to Coal and Nuclear Power Plants, Oil Refineries, Chemical Plants, and Agricultural Plants in the Mid-West Region. 
 
Sales Opportunity:
Very little competition, niche service company looking to break into new markets. Our services allow a plant to continue producing even in the event of a catastrophic leak. Once plant personnel use the service, they wonder how they lived without it.
 
Company ID: 116079 - Click Here for Full Details
Product Lines:
Mooring Hooks and Capstans
Marine Loading Arms
Marine Gangways
Oil Spill Response Equipment 
 
Target Markets:
Ports and Harbors
Midstream Oil and Gas Companies
Marine Terminal Owners
Marine Construction Companies 
 
Sales Opportunity:
Oil and gas marine transportation related industrial sectors are growing rapidly. Increasing demand for new marine terminals and associated equipmeent.
 
Company ID: 116034 - Click Here for Full Details
Product Lines:
Our Company Started in 1967 (Cincinnati, OH) where we Manufacture Equipment for Oil & Gas Storage Tanks.

W-G Seals Designs Seal Systems and Foam Dams for floating Roof Storage Tanks.
ETP Designs and Sells, Roof Drains, Gauge Pole Covers, Leg Boots, Skimmer Systems, etc. for IFR or EFR Storage Tanks. 
 
Target Markets:
Storage Tank Building Companies, Tank Owners (Shell, Exxon, Kinder Morgan). Mechanical Contractors, Pipelines, Petro-Chemical Industry as well. 
 
Sales Opportunity:
Our company has reps in S. Korea, India and China. We are looking for reps in South America, Europe, Indonesia, Australia and Africa. We want multiple reps in larger countries, based on geographic footprint and knowledge of their respective markets.
 
Company ID: 116030 - Click Here for Full Details
Product Lines:
1. Recycled tire char: An offtake from our scrap tire pyrolysis system. The carbon char can be sold as is for waste-water treatment, asphalt, masterbatch, and inks/dyes.
2. Oil: Also an offtake. The oil produced is sold as “cutter stock” to mix with heavier crude at refineries. 
 
Target Markets:
1. Recycled tire char -- Carbon Distributors, Asphalt companies, plastics companies, rubber manufacturers, etc.
2. Oil -- Refineries, lubricant manufacturers, etc. 
 
Sales Opportunity:
Ours is a Waste-to-Energy company, converting unwanted carbon-based waste into value added products with our proprietary Advanced Pyrolysis technology. We create valuable carbon and oil based products through the thermal conversion of waste feedstock—scrap tires in this case—in a net energy-positive process with zero harmful emissions.

We are seeking experienced, professional and well networked sales rep(s) to assist us in the ongoing sales of our system offtakes of oil and carbon char.

Our initial facility is located in Missouri with follow-on facilities planned across the nation (both our own and licensed).

The opportunity presents a lucrative multi-year contract for someone with existing relationships and knowledge of selling oil and carbon products and/or oil.
 
Company ID: 115997 - Click Here for Full Details
Product Lines:
Educational Training and Consulting Services to Corporations. 
 
Target Markets:
Presidents, CEOs, Training Directors, Sales Directors. 
 
Sales Opportunity:
Work the phones from home to contact the thousands of companies across America, representing one of the most successful training programs on the market today. With 20 years of proven results, we work with owners of all size businesses to increase sales and market shares, improve productivity, reduce turnover, increase profits and maximize owner equity. Our business model is simple - we save companies money and improve their business or they own us nothing. We have never had to take that position because we are the best at what we do.

Our Education Division utilizes one of the foremost training programs in the industry and has a way of helping employees to achieve their maximum personal and business potential. We customize the learning platforms to match the industry and specifically to the company client.

We work with employee groups numbering from ten to five hundred at a time, including all levels of management, in order to optimize results. We come to the company training center or meet at off-sites for company retreats. You control the pricing structure so you essentially write your own ticket. If you call yourself a professional salesman and like making into the six figures, then this is worth looking at. It may not be for you, but if it is, it will mean $.
 
Company ID: 115412 - Click Here for Full Details
Product Lines:
Our Sales Team Typically Calls on Larger OEMs that may Need Engineering Services, Manufacturability Analysis, Machining, and Assembly Services.

We have Three Business Segments, Contract Manufacturing, Mold Design, Manufacture, and Refurbish/Repair, and our Sanitary Valve Product Line. 
 
Target Markets:
We have Three Business Segments, Contract Manufacturing, Mold Design, Manufacture, and Refurbish/Repair, and our Sanitary Valve Product Line. These Segments Bring us into Various Markets including Aerospace, Defense, Medical, Optical, and General Industrial. 
 
Sales Opportunity:
Our company was purchased approximately 3 years ago by a private equity group whose goal is to grow the business and add additional product lines, as we have done with the valve product line, and are continually reviewing acquisition candidates to further strengthen the business.

There is also opportunity with a number of the portfolio companies on this equity group. We are committed to the sales representative sales model and have used it in numerous other businesses over the last 30 plus years in the industry. We are a small company with big growth plans and we need high caliber sales staff to get there!

Rep Expectations: To develop new customer accounts in a manner that results in customer satisfaction and achievement of bookings/sales/profit and asset management goals for the Company. Penetrate further into existing customers and programs.
 
Company ID: 115957 - Click Here for Full Details
Product Lines:
Looking for Sales Reps that can Obtain Work for our Custom CNC Machine Shop .

We are Able to Custom Machine Parts to the Customers' Requirements. 
 
Target Markets:
Our markets include Automotive, Military, Aerospace, Construction, Pharma, and Oil and Gas. 
 
Sales Opportunity:
Excellent opportunity for manufacturer's rep to team up with a company that has been in business for 20 years with current ISO 9001 -2015 Certification. We are a small company that can quickly meet the need's of the customer's requirements. Over 10 newer quality CNC machines. Commission structure to be worked out.
 
Company ID: 115247 - Click Here for Full Details
Product Lines:
Mass Flow Meters
Mass Flow Controllers
Pressure Controllers
Vapor Generators and Controllers
Volumetric Flow Controls 
 
Target Markets:
All Industries. Process, R&D, Labs, and so on. 
 
Sales Opportunity:
Looking for reps in Georgia, Louisiana, Arkansas Mississippi, Alabama, and W. Tennessee. We pay 20% commission and have only a handful of competitors. We have been in the US market since 2005.
 
Company ID: 115788 - Click Here for Full Details
Product Lines:
Fiberglass Grating (Molded and Pultruded)
Fiberglass Structural Engineering Design & Drafting Services
Fiberglass Structural Shapes
Fiberglass Structural Fabrication (Platforms, Stairs, Ladders, Handrails, etc.)
Fiberglass Fence
Removable Fire-Proofing Panels and Covers
Pipe Penetration Collar 
 
Target Markets:
Offshore Drilling and Production Facilities
Petrochemical Plants & Refineries
Industrial & Municipal Wastewater Facilities
Pulp & Paper Mills
Metal Plating & Mining Facilities
Commercial Warehouses
Beverage & Food Processing Plants
Hi-Tech Computer Industry Facilities 
 
Sales Opportunity:
We specialize in the design, engineering, and fabrication of structural fiberglass. We can do customer orders. It it can be built with steel, it can be built with fiberglass. Compared to steel, fiberglass is lighter, lasts longer, corrosion-resistant, and electrically non-conductive.
 
Company ID: 115742 - Click Here for Full Details
Product Lines:
Air Pollution Control Equipment
Onsite Power
CHP Applications
Industrial Gas Turbines 
 
Target Markets:
Manufacturers: Automotive, Chemical, Plastics, Food & Bev, Polystyrene, Fiberglass, Coatings
Biofuel Producers: Ethanol, Landfill, Biodiesel
Natural Gas Production 
 
Sales Opportunity:
We are bringing to market a turbine-based air pollution control system that generates electricity and heat from the process of destroying air pollutants such as VOCs and HAPs. The economic upside of our product versus legacy technology (RTOs, etc) are vast, as well as the environmental advantages. Seeking reps with access to customers in this space, also willing to enlist representatives for traditional on-site power (CHP) applications.
 
Company ID: 114368 - Click Here for Full Details
Product Lines:
Industrial, Agricultural, and Commercial Lubricants,Cleaners, and Specialty Products such as:

Engine Oils, Transmission Fluids and Gear Lubricants, Greases, Hydraulic Oils & Fluids, Fuel Stabilizers, Liquid Cleaners, Solvents & Degreasers, Powdered Cleaners, and Specialty Products. 
 
Target Markets:
Aggregate Operations, Agricultural, Concrete & Asphalt, Construction & Excavating, Ethanol, Government & School Systems, Industrial & Manufacturing, Landscape & Golf Courses, Logging & Timber, Marine, Mining, Oil & Gas, Power & Water, Recycling & Waste, Steel Mills, Transportation & Trucking. 
 
Sales Opportunity:
As a sales representative, have you ever:
* Built customers accounts that were taken away from you by the company?
* Lost commissions because management attached new and stupid demands to what was originally agreed to?
* Lost opportunities and accounts based on restrictive geographic boundaries?
* Had corporate overhead and salaried sales managers benefit from your production?
* Recruited people to the company and received little to no money for the effort?

Say no more! Come build equity in a business that will reward you today and for years to come.

What We Can Offer You:
* Unlimited Growth Potential, with No Cap on Earnings
* No restrictions on the area/region you can work
* Account Protection
* Monthly/Annual Incentive Bonuses
* No Inventory, Delivery or Collection Requirements
* A Premium Line to Represent
 
Company ID: 115454 - Click Here for Full Details
Product Lines:
We Offer a Reputable Line of Industrial Natural Gas Reciprocating Compressors that are Used for Gas Gathering and Midstream Applications. 
 
Target Markets:
Anywhere Natural Gas is Present and the Application Fits. 
 
Sales Opportunity:
We offer a reputable line of industrial reciprocating compressors that are used for gas gathering and midstream applications. Quality and price point are very competitive. Significant growth opportunity.
 
Company ID: 115217 - Click Here for Full Details
Product Lines:
Our Company Sells Industrial, Electrical, Tools very Similar in Offering to Klein, Greenlee, Ideal, Ilsco, etc. from Screwdrivers to Battery Operated Crimpers, Cable Cutters, and High Voltage Handtools.

Because of our Large-Volume Buying Power, we are Routinely 35-40% Less on our Stock Prices. 
 
Target Markets:
We Target Electrical Distribution, both Large Scale Chains like Graybar, WESCO, Elliott, Dealers, etc., as well as Independents like LoneStar, Mayer, City Electric Supply, just to name a few. Our Goal is to Get these Distributors Stocking our Tools while Eliminating SKUs from the Competitors. 
 
Sales Opportunity:
Our company offers prospective reps an opportunity to represent a real ground floor opportunity! We have been in business for 20 years, but are just hitting our stride in the market place by bringing on the Best manufacturers reps. In the business. If you just show up to these distributor accounts, we are a great relationship building company because we actually offer a lower priced tool without a loss of quality. Margin is everything to these guys and we offer better margins and higher discount to Their clients, you will grow your business and your company's bottom line with our products!
 
Company ID: 115041 - Click Here for Full Details
Product Lines:
Hydraulic Components:
Hose and Fittings, Lay Flat Hose, Filters, Pumps, Motors, Cylinders, Accumulators, Valves, Power Units, Oil and Lubricant Quality Sensors, Pressure Sensors, Din 3015 Clamps, Desiccant Tank Breathers, Gear Boxes, Ball Valves, Solenoid Valves, Quick Disconnect Adapter Fittings. 
 
Target Markets:
Target markets are: Oil and Gas, Pulp and Paper, Power Generation, Mining, Plastic Injection Molding, Steel, Precious Metals, Automotive, Mobile, and more. 
 
Sales Opportunity:
Great opportunity to grow with a fantastic company in the motion and control industry. The company takes care of its employees and its customers. Customer service is paramount to the organization. We are highly competitive and offer engineering and sales training support. We offer an attractive commission structure that is negotiable.
 
Company ID: 115335 - Click Here for Full Details
Product Lines:
Custom Steel Fabricator usually Work with 1/4 inch Plate and Up.

Products include: Tanks, Bins, Hoppers, Liners, Material Handling Conveyors, Structural Steel, Platforms, Towers, and Stairs. Heavy Weldments. We are Full ASME U,R, PP Stamps. 
 
Target Markets:
Industrial Manufactures, Power and Energy, Gas and Oil, Foundries, and Steel Mills, Plus Chemical Plants. 
 
Sales Opportunity:
We are a solid 35 year old company with vast knowledge and Skilled employees to help with all your needs. We are very competitive and adapt to Market situations. We fully support Reps as needed to assure their and our success.
 
Company ID: 113866 - Click Here for Full Details
Product Lines:
Advertising: Television Commercials, and Radio Commercials. 
 
Target Markets:
Companies that would like to Sell their Products and Services in the Cities that we Serve. 
 
Sales Opportunity:
The service (advertising) that we are interested in moving is very easy to sell because the shows that we're selling the advertising for are very popular. The area is very repressed when it comes to talent in the selling/marketing fields. The opportunities are limitless here for people who know how to sell products and services. Also, because of the area we are in, the price of the product is very inexpensive. This service can be sold for long periods of time. We offer 3 month to 24 month contracts and its easy to build up residual income from sales.

Reps will have the opportunity to earn from 20% to 40% commissions on the products they sell. The Radio show has been in existence for 10 years and is broadcasting in 5 different cities in Louisiana and Mississippi. The Television show is in it's 4th year of broadcasting and its on 2 television stations locally. It's on the FOX Affiliate and the ABC Affiliate and it has two different time slots in the morning.
 
Company ID: 115265 - Click Here for Full Details
Product Lines:
Automotive Products, Focus on Motor Oil. 
 
Target Markets:
Auto Repairs, Dealers, Gas Stations, Auto Centers. 
 
Sales Opportunity:
Automotive Products Distributor (focused on motor oil) seeks representatives for the Miami-Dade, Palm Beach, Martin, St Lucie, Okeechobee regions. Main functions: Door-to-door service in Auto Repair, Dealers, Gas Stations, Auto Center. And B2B service at major retailers. We are exclusive distributors of well-known brands in the world market. Our products have quality approved by the competent certification bodies, and highly competitive pieces. And our representatives have exclusivity in their areas of operation.
 
Company ID: 115215 - Click Here for Full Details
Product Lines:
Industrial Leather Gloves: Leather Driving Gloves, Canadian Leather Gloves and Welding Gloves. Workwear. All Kinds of Safety Workwear.
Wallets: Men and Women's Leather Wallets.
Safety Shoes: From S1P To S3 Range. 
 
Target Markets:
Oil and Natural Gas Companies, Industry Leaders in PPE (Personal Protective Equipment), Construction Companies, Industrial Supplies. 
 
Sales Opportunity:
We are one of the manufacturers and exporters of PPE products, (Gloves, Safety Workwear, Safety Shoes) in India.We have our own integrated ISO 9001 – 2008/SA 8000 Certified manufacturing plant with facility right from design development till export of finished goods. We also have our own leather tannery and we are member of ILPA (Indian Leather Products Association) and CLE (Customs of Leather Exports). We export all around the world; in Europe, America, Middle East, and Australia.

Some of our major clients with whom we are in business for the last 20 years are:
USA: MCR, Cordova, PIP, and John Tillman
France: Delta Plus
Germany: PKA Klocker, Schwarz and Schwarz, AS Arbeictsschutz GmbH, Itturri, CERVA and Workwear 24
Italy: Socim and Bongiorno.

Kindly submit a sales inquiry to us with your interest. Our Commission Structure is 1% of total Sales.
 
Company ID: 115206 - Click Here for Full Details
Product Lines:
Our Company’s Combustion Support and Optimization Equipment is Industry-Leading.

Flame Safety, Reliable Ignition, Combustion Analyzers are Specially Designed for both New and Retrofit Installations. Easily Networked, Easily Commissioned, Unmatched Reliability, and Durability. 
 
Target Markets:
Target markets are Focused where Steam Generation or Use of High Temperature is Vital to the End-User:
Power
Refining
Petro-Chemical/Chemical
Pulp & Paper
Refractory/Brick
Heating Districts 
 
Sales Opportunity:
Our combustion products lead industry in performance/price ratio. Thousands of boilers, heat treating units, fired heaters/reactors are coping with legacy combustion equipment that is failing and no longer supported by OEM. Our igniters, flame scanners, analyzers, combustion optimization controls are drop-in replacements that reduce start-up and operating costs and provide both immediate and long-term savings. Reps are supported with extensive training and joint-calling effort with business development staff. We offer one of the most generous commission programs available.
 
Company ID: 107896 - Click Here for Full Details
Product Lines:
Drilling Equipment such as Casing Heads, Spools, Studded Adapters, Subs, Downhole Drilling Tools, Specialty Fabrication, and Machining. 
 
Target Markets:
Drilling Rigs, Power Plants, and Drilling Contractors in the Geothermal, Oil & Gas, Well Water, & Horizontal Drilling Industries. 
 
Sales Opportunity:
We are a specialized drilling manufacturer based in Nevada and are looking to expand our reach into other areas. We can produce quality products generally faster than competitors. We've worked hard to secure great pricing on materials and freight to keep cost down and so we can remain competitive in the drilling industry.

We are seeking sales reps with oilfield or drilling experience preferred but not required, to work on a commission basis. Most of our products are required in the drilling process, so sales is mainly a matter of having equipment available when the customer needs it, at the right price.
 
Company ID: 115137 - Click Here for Full Details
Product Lines:
We Offer a Wide Range of Laser Measuring Alignment Systems, Accessories, and Customized Solutions that will Solve Manufacturing Problems, Improve Manufacturing Efficiency, Reduce Downtime, and Increase Profitability. 
 
Target Markets:
Our Laser Measuring Equipment is Actively Used Across Industries such as: Aerospace, Military, Power Generation, Machine Shops, Paper and Textile Mills, Shipbuilding, Plastic and Film Production, as well as Electronic Assembly, to name a few. 
 
Sales Opportunity:
Our alignment products are specifically engineered to increase profits and reduce costly downtime for industrial manufacturers. The intelligent design efficiently eliminates misalignment issues, resulting in increased production quality and reduced scrap. Our products are easy to use, easy to learn and highly versatile. Portable and compact, this equipment can easily go wherever you need to use it.

We offer an extensive range of alignment accessories, providing ready made options for working with your particular needs. Proudly engineered and manufactured in the USA. All products made of solid, machined metal. Hand assembled and inspected for quality. Built to last years of industrial use. Legendary Support and Responsiveness.

On call Technical Support featuring engineers with over 100 years of combined experience, here to give you reliable advice and innovative solutions for your needs.For your convenience, many products are in-stock and can often ship in a day.Customization is a Pinpoint Specialty – unrivaled in the industry. Rely on a quick turnaround when you need repairs.
 
Company ID: 113449 - Click Here for Full Details
Product Lines:
A Professional High Quality German & American Line for the Automotive Industry, products as the Carbon Build-Up in Engines, Catalytic Converter Cleaner, Engine Flush, Oil Consumption Additive.

Solutions & Products for the Mechanic, Internal, & External. Gasoline & Diesel Engines. 
 
Target Markets:
Auto Parts Shops, Retailers, Big Chains, New Franchise Car Dealers, distributors. Products that Repair Shops use every day that generates more money to the business and benefit the customers. 
 
Sales Opportunity:
Professional cleaning, care, and sealing – that is what the product range of our company stands for. All articles have been developed specifically for the automobile trade and industry. Every day we try to improve our products and keep evolving to satisfy the growing demands and requirements of the national and international markets. So we can guarantee our customers the best results: Maximum efficacy and at the same time the protection of natural resources are our highest aims.

A clean affair for both sides. Because of our constant research we keep our recipes up to date, but we also test new biologically degradable substances and make them ready for the market. This way we can always satisfy the growing need of our customers and reduce the contamination of the environment.
 
Company ID: 115080 - Click Here for Full Details
Product Lines:
Oil Enhancement and Contamination Control. 
 
Target Markets:
Power, Industrial. 
 
Sales Opportunity:
Never Change your Oil Again
Oil & Lubrication Monitoring and Assessment
Oil & Lubrication Contamination Control
Oil& Lubrication Enhancement
Life Time Oil
 
Company ID: 107971 - Click Here for Full Details
Product Lines:
Industrial Gloves, Tape, Safety Wear (Glasses, Helmets, Ear Plugs, etc.), Industrial Cleaning Supplies, Industrial Rubber Bands, Industrial Tapes. 
 
Target Markets:
Manufacturing Production Plants, Distribution Center Warehouses, Truck Cleaning, Remediation Clean-Up, Poultry Plants, Tire Plants, Oil/Gas Companies, Cleaning Blacktop Machinery, Garbage Truck Cleaning, Oil Change Centers, Gas Stations. 
 
Sales Opportunity:
Looking for seasoned rep organization that can get the job done. Selling industrial products which are exclusive to our organization. Unique selling opportunity to be first to market and a strategic pricing advantage with our business model. Must be currently selling to Manufacturing facilities on a Direct basis.

Experience selling gloves, tape, safety equipment, industrial cleaning products, industrial rubber bands and other industrial related products. Ability to get to the right person for our products. Aggressive and seasoned agency. 5% commission rate.
 
Company ID: 99524 - Click Here for Full Details
Product Lines:
Custom Engineered Shock and Vibration Solutions as well as Rate Controls, Force Controls, and Custom Dampers.

We have a Standard Line of Shock Absorbers in Stainless Steel, Carbon Steel/Black Oxide, and Composite. We can Handle Sizes from 1/8 dia to 20 inches Diameter Products. 
 
Target Markets:
Commercial Aviation
Defense
Industrial Machinery Designers and Builders
Oil and Gas Industries
Medical
Food Processing 
 
Sales Opportunity:
We have over 150 years experience developing products for the target markets listed. We have many patents and can supply low volume and high volume applications. We have hydraulic products, elastomeric solutions, and wire rope isolators. We have low and higher cost solutions and have substitute product for all the major competitors like ITT Enidine, Ace Controls, Enertec, etc. Please take a look at us and we can solve any shock, vibration, or actuation problem.
 
Company ID: 114864 - Click Here for Full Details
Product Lines:
Carbon and Sulfur Analyzers Using Coulometry, Osmometers for Molecular Weight. 
 
Target Markets:
Universities, Geology, Pharma, Petro Chemical, Oceanography, Steel, Ceramics, and many More Markets. Current Customers include: Chevron,Phillips, Aramco, USGS, NOAA, Universities, Food and Beverage, Can Manufacturing for Surface Carbon, Battery Companies, etc. 
 
Sales Opportunity:
We manufacture and design all our products. Glass blowing division as well for scientific glassware. Make a commission from your existing client base in labortories already testing for C02 and other carbonates or sulfur. We can also repair broken glassware on expensive labware. New product coming in 1st qtr for Plastics and rubbber industries. We are in almost every major University in the U.S and many in Canada!
 
Company ID: 114826 - Click Here for Full Details
Product Lines:
EP-2 Grease: Built with our Proprietary Metal Bonding Technology is 50 Times more Powerful than most Greases.
Penetrating Spray: 50 Times more Powerful than Spray Lubricants.
Heavy Duty Oil Stabilizer: 50 to 80% Wear Metal Reduction in Engines. 
 
Target Markets:
Drilling, Mining, Automotive, Diesel, Agriculture, Machining, Fabrication, Manufacturing, Railway, Racing, Elevator Repair, Construction, Marine. 
 
Sales Opportunity:
Our company establishes trust with your customers by maximizing results and profitability in savings thousands and preventing equipment failure. Our products have been tested over the past 10 years with a number of ASTM certified testing methods, by independent laboratories and by our customers.

They work immediately upon application and results are guaranteed. We do business with some of the largest companies in the world including Ford, Shell, Aramco, Nucor Steel and even NASA. So we are confident that our products work extremely well and pass every requirement for equipment.

The highlights:
• $2.5 million in laboratory and field testing.
• Products used by 100’s of top U.S. companies such as Baker Hughes, Halliburton, Schlumberger, Ford, GM, as well as military agencies including NASA.
• Experienced management team with decades of experience with patented lubrication technology.
• Decimate any lubricant formulation using zinc, PTFE, moly’s or Company Profile’s.
 
Company ID: 114687 - Click Here for Full Details
Product Lines:
Modular Fire Barriers, Separation barriers, Transformer Fire Barriers, Substations, Vault Protection, Ballistic Walls, Ballistic Fire Barriers, Jet Fire Barriers, Explosion Barriers, Solutions and Consulting, Fireproofing, Fire Protection, Cable Wrapping, Intumescent Products, Basalt Products. 
 
Target Markets:
Utilities, Energy Storage, Power Generation, Critical Infrastructure, Security, Safety, and Fire, Asset and Insurance, Transformer manufacturers, Nuclear Facilities, Dams and Waterways, Ports and Cargo, Airports, Rail, Marine. 
 
Sales Opportunity:
Join the industry leader in innovation and design of fire barriers and enhanced fire barriers for infrastructure protection. We deliver fire barrier solutions nationally and provide turn key assessment, design, fabrication and installation. We customized our listed and rated materials to fabricate barriers, boxes, wall modules, vaults, separations and all types of rated assemblies.

Fire, ballistic, blast, IED, heat, wind load, radiation, blast, noise and jet fire enhancements in a modular, cost effective design! Sell value - not price to large and small clients, utilities, contractors and with Sinisi, Always be Closing for Big commissions!
 
Company ID: 114802 - Click Here for Full Details
Product Lines:
Turnkey Instrument Air Compressed Air Systems, from the Smallest to the Largest, are Designed for the Rigors of Oil Field, Natural Gas and all Heavy Industrial Applications. 
 
Target Markets:
Oil Field, Natural Gas, and Heavy Industrial Applications. 
 
Sales Opportunity:
Ready to Set, Connect, and Run: Built to customer specifications, complete air systems include air compressor(s), filtration, air storage, air dryer, and drain accessories. Reliable, Clean, Quiet: Air Containers™ and AirBoxes™ are fully insulated for both sound and climate control and are a critical part of any VOC emission reduction program.

With our products you can conveniently, quietly and efficiently meet your emission reduction goals and power up your site with clean, dry, compressed air. Ours is a division of a larger company, which has been serving the Oil and Gas industry for more than 35 years. All reps will be fully trained at the factory and armed with all necessary literature to be able to hit the ground running.

Commission plan will be phased based on the interaction with the customer. In the prospecting phase a commission of 10-15% of the sale price is typical, while in the order taking phase (establish customer) ranges from 4-7% of sale price.
 
Company ID: 94037 - Click Here for Full Details
Product Lines:
A System of Two or More Hydro-Dynamically Engineered Rigid Nozzles, Positioned Around any Vessel’s Propeller.

The Venturi Ports Draft Outside Water to the Propeller, Nearly Eliminating Cavitation-Vibration While Increasing Thrust, Power, and Overall Performance for all Propeller-Driven Vessels. 
 
Target Markets:
Marina's, Boat OEM Manufacturers, Boat Repair Facilities, Dealers, Boat Rentals, Sll Marine Applications. 
 
Sales Opportunity:
Different Size Application Chart IO & OB Applications.

Chart Prop" (1) HP Carton /WT.
#19.500" 17.500” 250 to 440 24X16X14 / 25lb
#17.750" 15.750” 250 to 350 24X16X14 / 25lb
#17.000” 15.000” 175 to 350 24X16X14 / 18lb
#16.500" 14.500” 90 to 300 20x16X14 / 18lb
#15.750" 13.750” 80 to 115 20X16X14 / 16lb
#14.750" 12.750” 70 to 115 20X16X14 / 13lb
#13.750" 11.750” 40 to 60 16X16X14 / 12lb
#12.750" 10.750” 25 to 60 16X12X12 / 11lb
#11.750” 9.750” 15 to 30 16X12x12 / 10lb
#10.750" 8.750” 10 to 15 12X12X12 / 9lb
# 9.750” 7.750” 8 to 10 12X12X12 / 8lb
# 8.750" 6.750” 2 to 8 12X12X12 / 7lb

Maximum Propeller Diameter is recommended for optimal performance. Light weight planning hull & low speed vessels may be able to utilize closer Tolerances. The #16.500" also fits 40hp to 90hp Mercury Big Foot Motors. Unlike All Other Propeller Guards, it Performs At All Speeds! Quote for custom heavy duty 3-piece 19.5 Thrustor designed for our other applications to meet DOD, US Navy & work boat specifications is available upon request. Nozzle size available summer 2014.
 
Company ID: 114511 - Click Here for Full Details
Product Lines:
Project Management, Engineering, Field Service, Pump Repair, Compressors, Centrifugal Pumps, Screw Pumps, Diaphragm Pumps, Gear Pumps, Hydraulic Gear Pumps, Vacuum Pumps, Vane Pumps, Progressing Cavity Pumps, Hydraulic Pumps, End Suction Pumps, Self Priming Pumps, Multistage Pumps. 
 
Target Markets:
Oil & Gas, Power & Generation, Pulp & Paper, Marine, Water & Wastewater, Compressors, Construction, Government. 
 
Sales Opportunity:
As a solution provider, our company is driven by the success of our customers and suppliers. Our goal is simple, we listen to our customers and what you need. We connect our customer with the right solution, and then we deliver on our word.

This is the value that we provide to our customers and to your advantage. We proudly serve a variety of industries. Product knowledge is a key component in our ability to provide value for our customers. Our company ensures this aspect of our service is available when our clients need it the most.
 
Company ID: 114448 - Click Here for Full Details
Product Lines:
Ball Valves, Gate Valves, Butterfly Valves, Check Valves, Choke Valves, Wellhead, & X-mas Tree. 
 
Target Markets:
Our Products are Widely Used in Natural Gas, Oil, City Heat Supplying Fields, especially Applied to Natural Gas and Oil Long Distance Pipeline, Tank Field Pipe Network (including Wharf, Airport, Oil Depot, Oil Tankers, Oil Station)s, etc. 
 
Sales Opportunity:
We have introduced world level technology and management processes to produce the international advanced grade of fully welded pipeline ball valve, flat gate valve, valve actuator, and other high-tech products.
 
Company ID: 114412 - Click Here for Full Details
Product Lines:
Gate, Globe, Swing Check in 150 Class up to 4500 Class in Carbon steel, Stainless steel, Alloysteel, Duplex, Super Duplex, Monel and Alloy-20. Gate, Globe, Swing Check, Lift Check, Ball, Jacketed, and Y-Type Valves.

We do take customised valves order. We do stock valves in huge quantity. 
 
Target Markets:
Europe & Middle East Suppliers and End-Users such as Power Plants, Petroleum Industry, Offshore, Chemical, and Fertilizer Industries, etc. 
 
Sales Opportunity:
I need international sales agent on commission basis. I will give very good commission if they give me business.
 
Company ID: 114367 - Click Here for Full Details
Product Lines:
DeNox and CO Catalyst and Services. 
 
Target Markets:
Refineries, Petrochemical Plants, and Coal and Gas Fired Utilities. 
 
Sales Opportunity:
World leading manufacturer of catalyst technologies, services, and products looking to expand presence in Gulf Coast, particularly Texas, Kansas, Missouri, Nebraska, Oklahoma Area.
 
Company ID: 100240 - Click Here for Full Details
Product Lines:
High Quality & Performance-Driven Consumables in the Spill Response, Surface Protection, Safety & Clean Up Categories. 150+ SKUs that Compliment Existing Wholesale Relationships where their Customers' Hands get Dirty from Heavy Industrial to DIY. 
 
Target Markets:
Looking for Reps with Existing Relationships in any Blue Collar Wholesale Setting. Presently enjoying Success in HVAC/P, General Industrial, Elevator Industrial, Construction, Paint Supply, Baking Supply, and beyond. Reps Selling Directly to Contractors/End-Users also of interest to us. 
 
Sales Opportunity:
This opportunity is suited to reps who agree that quality never goes out of style.

We have sales opportunities for reps and agents with existing business selling directly to wholesale, retail and contractors in both 'commission only' and 'buy/sell' capacities. We pay top line bonus on all sales generated by your company which is tracked through an online system and have means to regenerate business and rekindle old relationships that might have slipped away.

Commission structure varies on experience but due to the nature of our products [high quality consumables] the replenishment inventory commissions are where it's at. We provide online/over the phone training and a conference call facility to walk you and your customers through the finer points of using our products and all the features & benefits of stocking them.

You will have the ability to soft sell through our online system also. This will generate further commissions for your company and replenishment orders from these efforts also pays commission to you. We are actively looking for sales representation in all parts of North America [and South & Central America starting Q2 2019].
 
Company ID: 76745 - Click Here for Full Details
Product Lines:
Mineral Polymer Material can be Modified to Remove Contaminants from Water Selectively or in Broad Spectrum of Applications.

Our Patented 2-Stage Modified Mineral Geopolymer - Biopolymer Works as a Precision Molecular Sledge Hammer to Remove Contaminants from the Most Difficult Types of Water. 
 
Target Markets:
Agriculture, Aquaculture, Beverage Manufacturing, Environmental, Industrial, Mining, Extraction, Municipal, Nuclear - Anything that has to do with Water! 
 
Sales Opportunity:
No one in the World can do what we have accomplished! We are the Global Manufacturer of a Patented 2-Stage Modified Mineral Geopolymer - Biopolymer Works as a Precision Molecular Sledge Hammer to Remove Contaminants from the Most Difficult Types of Water. This has taken over 10 years to perfect! All of the World Patents are now in place.

We can do the following:
Contaminant removal including and not limited to the following;
• Total Suspended Solids
• Total Dissolved Solids
• Nitrates
• Phosphates
• Radionuclides
• Arsenic
• VOC’s
• Heavy Metals
• Pesticides
• Pharmaceuticals and Estrogen
• Viruses
• Parasites
• Microbial Cysts
• Bacteria
• Algae
• BOD, COD & TOC

The Founder & CEO recently said: As far as chemistry goes, if there's a better 1-2 combo out there, it's from a boxer that hasn't been born yet. Submit a sales inquiry to us because the next BIG Oil Field Strike will be"How to Clean Water that nobody else in the world can - But We Can!
 
Company ID: 113991 - Click Here for Full Details
Product Lines:
Secure Cloud Service for Linking any Asset (Industrial Control, IoT System, PCs, Everything) to the Cloud.

The Service Improves System Resilience & Security, Asset Awareness, Reduced Operational Costs, & Integration with Other Services to Expand the Customer's Business. Works with Legacy Equipment. 
 
Target Markets:
Industrial and Small and Medium Enterprises (SMEs). 
 
Sales Opportunity:
We have something unique and flexible, allowing customization to any industry. It is easy to install, just a small pluggable element that attaches to any device, which then auto-magically attaches to our cloud service.
 
Company ID: 113965 - Click Here for Full Details
Product Lines:
Explosion Proof Lighting Products
Portable Power Distribution
High Lumen, High Efficiency Lighting
Explosion Proof 7 Vapor Proof LED Drop Lights, Flood Lights
Custom Solutions Manufacturing
Re-Rental Fleet Available
100% USA Made and US Veteran Owned and Operated 
 
Target Markets:
Lighting Distributors
Environmental
Oil & Gas
Utility/Power Plants
Nuclear Plants
Shipyards/Marine
Aviation
Government, FEMA, Homeland Security
Construction
Painting Booths
Automotive
Food & Beverage
Grain Storage 
 
Sales Opportunity:
USA Made in Haltom City Texas. Company is Veteran Owned and operated. We manufacture Explosion Proof and Vapor LED lights. Great opportunity to get these products into the hands of many customers in multi-industries. looking for representatives to canvass the country.
 
Company ID: 113927 - Click Here for Full Details
Product Lines:
Portable Trade Show Booth Kits.

Anti-Fatigue Interlocking Flooring:
- Wood Interlocking Flooring (9 Colors)
- Carpet Interlocking Flooring (13 Colors)

Outdoor Flags & Roll Up Banners:
- Rollup Banners (Single and Double-Sided)
- Outdoor Flags (Several Different Shapes - up to 16.5') 
 
Target Markets:
Any Company that would Exhibit at Trade Shows or have a Need for Outdoor Flags, Roll-Up Banners, or Foam Flooring. 
 
Sales Opportunity:
This is an opportunity to get in on the ground floor and work with a new, growing company that was created on a basis of exceptional customer service, added value and transparent pricing. Our team includes event industry experts, talented designers and great logistics and operational support.

We are on a mission to provide the smoothest ordering process available for our customers. As a team, we understand the value sales reps can bring so we strive to offer generous commission packages as well as exclusive protection for your territory. If you are interested in learning more please don't hesitate to contact us so we can discuss our product line and the opportunity. Thanks for considering working with us.
 
Company ID: 113921 - Click Here for Full Details
Product Lines:
Crude Oil from Pyrolisis
Tire Char 
 
Target Markets:
Chemical Companies, Oil Refineries, etc. 
 
Sales Opportunity:
We are an experienced engineering firm with new products yearly. Over the past 4 years we have been developing a method of pyrolisis that can create up to 300 gallons of crude oil an hour and 400+ lbs of carbon char. Our feedstocks include waste tires, waste plastic, waste foods, etc. Our machine is in operation and 3rd party testing is underway. We are looking for experienced people in the field that can help us find customers so that we can start producing product to their specifications.
 
Company ID: 113867 - Click Here for Full Details
Product Lines:
Oil and Gas Services. 
 
Target Markets:
Oil and Gas Companies. 
 
Sales Opportunity:
We want to contact American companies that need representation in Bolivia. Ours is a company of more than 40 years in Bolivia that offers its services to the petroleum companies in the areas of engineering, management of projects, and construction. Our experience is accentuated in gas plants, oil pipelines, gas pipelines, petrochemical plants, and energy providers.

Also we have realized it works with magneto telluric, prospect, and exploration petroleum. We support commercial agreements with foreign companies of prestige and take part in tenders for public and private companies. From 2016 we have added our cadre Unit of Business, which purpose is to represent prestigious signatures as being industries of teams, industrial materials, chemical products that could be sold in Bolivia under the representation of our company.
 
Company ID: 113860 - Click Here for Full Details
Product Lines:
Industrial Batch and Conveyor Ovens, plus Related Equipment.

Both Custom and Standard Industrial Ovens Used for a Wide Range of Applications including Heat Treating, Finishing, Drying, Curing, and many others. 
 
Target Markets:
Nearly Every Industry including Aerospace, Automotive, Petroleum, Composites, Finishing, Foundry, Heat Treating, Military, and others. We Do Not Manufacture Ovens for Food Processing. 
 
Sales Opportunity:
Our company is part of a large group that is the leader in batch and conveyor ovens. We have shipped over ten thousand pieces of equipment to locations all over the world. We have been designing, engineering, and manufacturing industrial ovens and related heating equipment for over 40 years, and have built a solid reputation through integrity, quality equipment and great service. We provide our sales representatives with a reliable flow of leads and pay competitive commission rates.
 
Company ID: 113696 - Click Here for Full Details
Product Lines:
Electric Actuator (Limitorque, Rotork, EIM, etc.) Parts and Services.

Large Inventory of Spare Parts for Limitorque SM, SMA, SMC, SMB, and HBC Actuators and Gear Boxes. Shop and Field Refurbishments Services and Training. 
 
Target Markets:
Electric Generating Stations including Fossil, Oil, Gas, and Nuclear, Petro-Chemical Plants and Refineries, Pulp and Paper Plants, Water Treatment Plants. 
 
Sales Opportunity:
Our company has been in business for over 30 years providing the industries noted above with on-time, error-free cost effective actuator parts and services. We see the use of representatives as a win-win situation for the representatives to focus on sales and we will focus on providing quality services.
 
Company ID: 113656 - Click Here for Full Details
Product Lines:
We are a Authorized Distributor for Exxon Mobil Base Oil in Upstate NY.

We are looking to sell Motor Oils (Cars & HD), Industrial, Lubricants, Farm Equipment, and Antifreeze. The Packages are Available in 1 Quart (Pouch and bottle), 1 Gallon, 5 Gallon Pail, and 55 Gallon Drum. 
 
Target Markets:
Our targeted markets are Auto Supply Distributors, Oil Distributors, Convenience Stores, Truck Stops, Trucking Companies, Farm Equipment Distributors, Heavy Duty Equipment Companies, Grocery Stores, and etc. 
 
Sales Opportunity:
Working with us you won't be disappointed by the quality of our product which means the customers will be satisfied both quality and pricing. Our products are formulated as same as national branded products but since we are not a recognized brand our pricing is competitive. We don't disrespect our sales reps and customers, we support our people. We will increase the % of the commission depends on the volume of sales. The commission starts 5% and up.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2019
LINKS | SITE MAP | TERMS OF USE