Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Plastics\Mold / Tool / Die
Click on Company ID to View Full Details
Company ID: 111687 - Click Here for Full DetailsNew Profile
Product Lines:
An All Purpose Cleaner/Degreaser that is Several Times More Powerful than that "Green Stuff" available at the Stores.

Plus, in Bulk it is much Less Expensive. Also a Hand Cleaner that Uses Ground Up Corn Cobs as the "Grit" as Opposed to Pumice, which Clogs Pipe Drains. 
 
Target Markets:
Manufacturing, Transportation, Food Processing, and Farmers. 
 
Sales Opportunity:
Thank you for looking at our great opportunity! We just bought out the formulation for an all purpose cleaner/degreaser that will literally clean almost anything. We inherited about 1,000 customers of this product who swear by it and will give testimonials.

This product was developed to remove the caked on pesticide from fruit farmer's sprayers (which is a huge problem for them) and it removes it instantly. It also removes the black streaks from travel trailers. If you have Ever tried to do this yourself, you know how hard it is to get those off.

This product makes them run right off. Bottom line, if it works on those 2 problem areas, it will work on anything. We also sell this product in the manufacturing sector not only because of it's effectiveness, but also it's safety rating of 1-0-0. The only thing safer is water. In fact the old owner used to drink this stuff in front of prospects. We all know how safety conscious companies are today so this is a Huge advantage over the competition!

Our proprietary hand cleaner gets responses such as, "Best that I have ever tried" and "It even got the grease out from under my fingernails". This cleaner contains citrus as one of it's active ingredients and aloe to cure dry, chapped hands. Our blender of these 2 products ships the same day out of Iowa and most times, your customer would get them the same day. I look forward to hearing from qualified, hard working applicants! Protected territories are available as well.
 
Company ID: 70656 - Click Here for Full DetailsUpdated
Product Lines:
Industrial Centrifuges and Filters.

We are a Chinese Chemical Processing Equipment Manufacturing Company. Specializing in Separation Machinery, including Centrifuges and Filters. The company headquarters is based in Shanghai, China. 
 
Target Markets:
Fine & Bulk Chemicals, Pharmaceuticals, Sugar Refining, Food, and Agricultural Industrial. 
 
Sales Opportunity:
We are now seeking commission-based sales agents with experience at selling industrial equipment. Our main products are Industrial Centrifuges and Filters. Such as Pusher Centrifuges, Decanter Centrifuges, Top-Suspended Peeler Centrifuges, Horizontal Peeler Centrifuges, Vacuum Drum Filters. Our company was established in 1958 and a leader in China in the centrifuge and filter fields. Submit your sales inquiry for more info.
 
Company ID: 107652 - Click Here for Full Details
Product Lines:
We are a Mass Producer of Thermoplastic Parts, Proficient in Profile Extrusion, Injection Molding, and many Value Added Services Applicable to both. 
 
Target Markets:
Our Largest Markets are Consumer Goods, Residential and Commercial Lighting, Construction, Manufacturing, and Refrigeration to name a few. 
 
Sales Opportunity:
This is a good opportunity because of the many values we bring to the table; plus our ability to be in on the ground floor regarding a design (40% of our company sales are of proprietary products) makes us even more of an asset to a customer requiring product design support. (not to be confused, however, with a product designer)

The company has been around since 1953 and has weathered many issues that torment American manufacturers. We continue to be diverse and yet still use many of the techniques that got us here and has kept us current. Longevity and continued prosperity are assets companies look to partner up with these days for certain. We are ISO 9000 Certified since 2002.

These aforementioned aspects (longevity, stability, diversity, and constantly reinvention of oneself) plus flexibility and the willingness to explore new markets and/or process trends are competitive advantages for our company, aside from the many processing capabilities we offer.

We support our independent representatives through a strong, mutually beneficial relationship to make it a "win-win" situation through strong marketing processes to promote and generate leads, strong communication and factory support, and the understanding, unlike some, that a heavily compensated independent actually means lucrative sales for the company as a whole. That's our philosophy.

We offer 5% commission, paid in the month following the previous. We have a Memo of Understanding that covers our responsibilities and expectations.
 
Company ID: 88403 - Click Here for Full Details
Product Lines:
Electronic Components, Electronic Assembly, Electromechanical Assembly, Cables, Injection Mold Tooling, Injection Molding, Metal Fabrication, Metals, Precision Plastics. Ceramic to Metal Components, Particle Accelerators, and Associated Components, Complete Turnkey Assembly of Electronic items. 
 
Target Markets:
Automotive Manufacturers, Appliance Manufacturers, Aircraft Industry, Entertainment Manufacturers, Arms Manufacturers, Security Industry, Medical Equipment Manufacturers, Power Industries, Applied Research, and so many more. 
 
Sales Opportunity:
We seek experienced sales reps with a strong following. All areas open. All our products and services are done in our China facilities. Excellent opportunity. Products sell well. Engineering and sales support always available. Multiple sales persons the rep organization a definite plus.
 
Company ID: 98608 - Click Here for Full Details
Product Lines:
The IceStorm90 (TM) is a Patent Protected, Award Winning Cleaning Technology that is Attracting Attention by Fortune 500 Companies Around the World and is Quickly Becoming Best Practices.

Replace Chemical Cleaning
Replace Dry Ice Blasting
Replace UHPWW 
 
Target Markets:
Aerospace, Automotive, Contract Cleaning, Fire Restoration, Food and Beverage, Foundry, Historical Restoration, Plastics, Medical Device Cleaning, Packaging, Power Generation, Printing, Rubber, Nuclear, Marine, Locomotive, Petro Chemical, Refinery. 
 
Sales Opportunity:
Join the Ice Revolution!

We are a dynamic, well funded, aggressive technology company that has created a compact cleaning system that uses H2O ice as the primary cleaning media. Not only do we have a very strong and intense innovation plan to take this technology to the next level, If you invest your time into us, we will invest into you and make sure that you don't come up against competition.
 
Company ID: 106515 - Click Here for Full Details
Product Lines:
Calibration Service, Inspection Service, Repair Service, Metrology Equipment Sales, Precision Tool Sales. Fluke, 
 
Target Markets:
Manufacturers of All Major Industies. Including: Food and Beverage, Medical and Biochemical, Aircraft, Automotive, Transportation, Electronic, Rail, Fasteners, Plastic and Steel. 
 
Sales Opportunity:
Percentage of gross sales based commission, paid monthly.

ISO 9001 & IEC 17025 Accredited manufactures are Required to enlist accredited calibration laboratories. Large, global manufacturers are ideal potential customers. With years of experierence our certified technicians and customer service members offer great technical support when it comes to answering customer questions regarding service and product. Along with the dozens of companies we have partnered with in distribution, Sales representatives will have a full support team to their advantage.
 
Company ID: 110347 - Click Here for Full Details
Product Lines:
Metal, Plastic, Rubber Parts Custom Made such as Molding, Extrusions, Machining. 
 
Target Markets:
OEMs - Non-Medical Manufacturers or Government Suppliers. I.E. Automotive, Appliance. Some of our existing OEMs are Electrolux, Wilson Trailer, EZ Liner, Winnebago 
 
Sales Opportunity:
We have many advantages for you to be successful with us. Please submit a sales inquiry us. We like to share the wealth with smart/hard workers. Our company is a very high integrity company based on Competitive commissions, and Longevity. WMC provides warehousing for their customers so the lead time is 1 -3 days. Exceptional QC Department, 15 Years in the Business, High Integrity, and our Customers come first. We want long term relationships, fair commissions, and commissions that do not lower as sales increase
 
Company ID: 76416 - Click Here for Full Details
Product Lines:
In Business since 1912, we are a leading Manufacturer of High Volume, Precision Metal Stampings and Assemblies, and the Tooling to Produce Them.

In addition to Precision Stamping we have ~65 Multi-Axis CNC Machining Centers, Laser Welding, Laser Cutting, Metal Finishing, and Pad Printing. 
 
Target Markets:
We Sell to OEMs in the following markets: Medical (Device and Drug Delivery), Automotive, Aerospace, and Consumer Goods. We also sell to Molding Companies that do Insert Molding. We would like to Penetrate the Firearms and Electronics Markets. 
 
Sales Opportunity:
We are looking for Manufactureres representatives in Southeast and West Coast US, Canada, and Mexico. Our company is one of the most respected tooling and metal stamping companies in the country and we are looking to partner with sales organizations that can help us grow and diversify.

Being a contract manufacturer we are capable of producing precision parts, on time for any industry. Our engineering and die design departments have the experience and skill to handle the most complex projects from prototype through production.
 
Company ID: 109942 - Click Here for Full Details
Product Lines:
Our Product Range includes Rubber Seals, Gasket, Tubing, Hoses, Die-Cut Gaskets, and Molding Products.

In Addition to Stocked Products we Custom Manufacture Products per our Customer’s Requirements to Meet their Design, Engineering, and Performance Expectations. 
 
Target Markets:
Typical Accounts using our products include Industrial, Manufacturing, Governmental, Construction, Automotive, Aerospace, Marine, Pharmaceutical, Shipping, and Agriculture. This Wide Customer Base Allows for Stable Earnings and Consistent Growth. 
 
Sales Opportunity:
We are looking for an independent outside sales representative with experience in selling elastomer extrusion and molding seals, gasket, tube, hose and O rings products to industrial manufacturers, construction industry, Pharmaceuticals, Food and Dairy Industry, Automotive and, Agriculture to name a few.

Ours is not just another rubber company. We are a team of experts who deliver top quality rubber seals, extruded rubber products, molded rubber products, and gaskets. Our team understands the clients’ specific requirements and suggests the best suitable solution to optimize the performance.

Representing our company means:
• A secure and protected territory where individual will be able to grow new accounts
• Reputation of the best products and service in the industry
• Recession resistant products
• High potential of repeat sales

We are a leading manufacturer of Rubber Extrusion, Molding, and the Die-Cut Fabrication of a vast range of high-quality, competitively priced rubber parts and components for the industrial markets. Our extensive product line consists of extruded rubber seals, gasket, rubber sheet, O-rings, rubber tubing, molded rubber products and more. Our company maintains an extensive inventory of rubber products having different shapes, sizes, and materials to meet the diverse requirements of our customers and solve our customer’s toughest sealing challenges.
 
Company ID: 110746 - Click Here for Full Details
Product Lines:
Ours is the Most Compact Size Steamer Machine on the Market.

It Provides Continuous Steam with Strong Pressure Inside. This Product was Designed to Increase your Productivity with a lot of Field of Application. 
 
Target Markets:
Car Wash, Car Detailing
Food Processing
Medical Clinics
Commercial Facilities
Residential Service & Maintenance
Motorbike & Bicycle Shops
Golf & Sports Equipment Cleaning 
 
Sales Opportunity:
My company is an exclusive importer in Canada for this steamer. Our product is very special steam cleaner which can be used for car detailing, food processing, medical clinics, commercial cleaning, residential cleaning, motorbike & bicycle, golf, and sport equipment, etc.

Our product Certified by CSA and it has many advantages comparing with the same class commercial products and it will bring more productivity for users.

Those are:
1. Certified steamer
2. Continuous steam for commercial use
3. Strong pressure with 13 bar
4. Quick connect to any other attachment equipment
5. Flexible voltage 220V/110V

We strongly believe that our product will bring more productivity for end user, bring more profit to business owners and this would be a good opportunity to have more income with you by our good commission rate.

Thank you and best regards.
 
Company ID: 76546 - Click Here for Full Details
Product Lines:
Industrial Power Transmission Equipment such as Gears and gearbox repair. These lines offer a high margin sales opportunity with healthy commission rates. 
 
Target Markets:
Mostly Industrial manufacturers: Plastics, cement, beverage, food, steel, paper, etc. Anyone who is using power transmission equipment to manufacture products. 
 
Sales Opportunity:
We are one of the few Gearing / Gearbox repair and replacement facilities that can manufacture all their own part needs. We have nationally signed deals with Siemens (Flender) which will open doors for reps. We have excess production capacity, a solid inside sales support team. What we Do NOT have is established reps to help communicate our existence to the prospect base. We need 3-5 established reps in their own fields who we will train to add out services to your basket.
 
Company ID: 110572 - Click Here for Full Details
Product Lines:
We have a Proprietary Tool Design that Allows us to Sell High Quality Injection Molded Prototypes to Customers of Various Industries.

The Rapid Prototype Segment of our Business has been the Core, however we have Added Small Volume Production to our Offering. 
 
Target Markets:
We currently sell to the following markets:
Small Engine
Appliance
Automotive
Plumbing

We are interested in selling to these additional markets:
Medical
Aerospace
LED
Caps and Closures

Most of our Success comes when Linking our Engineers with the Engineering Team of the OEM. 
 
Sales Opportunity:
We are a small organization and only 2.5 years old. We have a team of young and talented engineers who are excited to grow in this industry. Our team is talented and exciting to work with. We are looking for dynamic growth opportunities and are excited to expand. Reinvestment in technology is the cornerstone of our business plan and we want to change the way the OEM world thinks of prototypes.

We are looking for dynamic team members that could open doors to new business opportunities and that would like to be a part of new and different manufacturing strategies.

Our focus is on technology and automation meaning our pricing is globally competitive and we do not lose many opportunities we come across. Our primary obstacle is managing growth, and that is why we are looking to add some strategic partners who understand how to grow effectively. We are not looking to be "all things to all people." We know our sweet spot, and that is where we want to grow.

We are excited to find partners who share in this vision and want to be a part of a growing and dynamic business. The commission structure would be discussed off line. However, we feel that our offer is more than competitive based on market data we have reviewed.
 
Company ID: 101022 - Click Here for Full Details
Product Lines:
CNC Milling and Turning, 5 Axis Milling, Grinding, Manual Operations. Tooling, Molds, Dies, Machined Components, Fixtures, Prototypes to Production 
 
Target Markets:
Aerospace, Military, Packaging, Automotive 
 
Sales Opportunity:
Seeking a sales representative for 30 year old company AS9100 and ISO 9000 Certified CNC Machining Company. Looking for someone with contacts in the Aerospace, Automotive, Packaging or any industry that needs machined components.

Die-Verse Tool has a team with over fifty years of combined experience in our CNC milling department. We offer a full range of milling services including CNC milling capabilities of long or short run production parts and 3D contour milling with 5 Axis capabilities. Our team offers experience in jig & fixturing, tool & mold making and prototype tooling.

In addition to standard milling and tool making we are able to provide services that include prototype tryout of molds for the rubber and plastic industry, build and tryout of stamping dies as well as production runs for plastic molded parts and stampings in our facility. At Die-Verse Tool & Mfg. our primary goal is to ensure that our customers receive a quality product reasonably priced with a timely turn-around time. Six CNC Mills, Four CNC Lathes, 20 man shop.
 
Company ID: 110303 - Click Here for Full Details
Product Lines:
We have been in the Business of Manufacturing Eyelets, Metal Stampings, Centerless Grinding of Small Diameter and High Tolerance Tubing and Wire for the Medical Industry and others, Secondary Operations, Sorting and Packaging for over 28 years. 
 
Target Markets:
We are open to any market but have mostly done business in the Medical, Firearms, Electrical, Electronics, and Hardware Industries. 
 
Sales Opportunity:
We are a small but well established company of over 28 years. Our machinery and Quality Control equipment are amongst the best in the industry. We have a great relationship with our customers to the point that some of our current customers have been with us from the beginning. We consistently meet or exceed our customers requirements and we are looking for sales reps. that can help us expand into new territories and grow with us.
 
Company ID: 40814 - Click Here for Full Details
Product Lines:
We are a China based company who has a Proven Track Record throughout the World.

1. Mold Making, Plastic Molding, & Metal Stamping.
2. PCB Design Engineering, PCB Layout, Rapid Prototyping. PCB Assembly Capabilities include SMT (Surface Mount Technology) & Mixed Technology (SMT + PTH). 
 
Target Markets:
Companies that are looking for Electronic Products, Mold and Molding, Casting Parts that offer Great Quality, Pricing and Customer Satisfaction. Our target customers are OEM Manufacturers Seeking Support in Product Development and Manufacture to Improve their Product Systems. 
 
Sales Opportunity:
Excellent Commission Structure and Protected Territories for Reps. Our company is very stable. We are also looking for reps Worldwide. Submit your sales inquiry for more info.
 
Company ID: 97820 - Click Here for Full Details
Product Lines:
Custom Cable Assemblies & Wire Harnesses
Electro-Mechanical Assemblies
PCBA
Overmolding Wire Assemblies
Metal Working 
 
Target Markets:
Automation Industry
Automotive Diagnostic Equipment & Services
Automotive/Truck - Fleet Management
Gaming/Vending Machines Wire Harness
Electronic Contract Manufacturer
ODM Manufacturer 
 
Sales Opportunity:
We commenced our business in 1983, based on the manufacture of custom cable assemblies, and since then have been dedicated to upgrading manufacturing facilities and product range, together with the building of long term supplier/customer relationships.

In conjunction with the cable business we have integrated the manufacture of machined and/or stamped metal hardware, plastic injection parts, connectors, etc. to produce completed electro-mechanical assemblies. Through this process we offer extensive options to meet with customers requirements. This function enhances our range of services to provide our customers with the best solutions required by various industries.

We are seeking career-minded Sales Reps wanting sustainable relationship to promote our products and services in the North america market. Several territories are available. Reasonable allowance and generous commissions are open for discussion.
 
Company ID: 89220 - Click Here for Full Details
Product Lines:
Our Fluidized Bath Thermal Cleaning Systems Quickly Removes Plastic, Resins, Paint, and Adhesives from Tooling, Parts, and Hardware. Fast ROI and Safer than Using Ovens, Manual Cleaning, and Torching.

Great for General Temperature Apps such as Calibration, Annealing, Thermal Analysis, & others. 
 
Target Markets:
Plastic Extrusion, Injection Molding, Medical Tubing & Devices, Plastics, Chemicals, Fibers, Wire & Cable, Hose & Pipe, Packaging & Film, Paint & Power Coating, Manufacturing & Extrusion Engineers, Plant Managers, Tool Room Managers, Technicians, Maintenance Personnel, Production Engineering. 
 
Sales Opportunity:
Reps Must Have Plastic Extrusion, Injection Molding Background, or Experience!

Our systems have a small footprint. They are easier to operate, safer, and faster than competing methods. We provide all technical support, literature, free sample cleanings, and YouTube video showing the cleaning process. We have 25 years of experience in the industry including this proven application.

This is a good prospecting opportunity for a rep who calls on a lot of accounts weekly. In short, we want someone who can simply hand out our brochure and find out how the customer is currently cleaning their tooling and hardware. The systems are priced from $7K to $40K with a commission structure between 10% and 15%. Submit a sales inquiry to us today to discuss our products and the application further.
 
Company ID: 100651 - Click Here for Full Details
Product Lines:
PolyVisions Manufacture Plastic Compounds.

Our Products are Sold in Pellet Form and are Made from Several Plastic Polymers. We Add Materials to Plastic to Enhance its Properties. We have Several Product Lines with Unique Advantages. 
 
Target Markets:
We Sell our Product to other Manufacturers of Plastic Film, Sheet and Injection Molded Parts. There are Hundreds of Potential Customers. Markets include; Packaging Film, Office Supplies, Buses, Trains, and Aircraft Interior Parts, Automotive, Roofing, Sporting Goods, Frozen Entre Food Trays, etc. 
 
Sales Opportunity:
We have unique products that have a high acceptance rate when introduced to the right opportunities. Our products are technically advanced an we can achieve better than average profit margins in most applications. We sell to other manufacturers working closely with their engineers to get our products evaluated for specific applications. We are a small company under new ownership working to get our name and products out in the market.

There are many other plastic compounders, but industry consolidation has created opportunities for relatively small agile companies like ourselves. PolyVisions is owned by a financially strong parent who is ready to further invest in new opportunities for growth. The markets listed above are just a few of the dozens of markets our products have potential in.

We are also willing to work on developing new products to meet the specific needs of customers and or prospects. This is something the larger compounders do not engage in. We have a technical staff, lab and production facility capable of handling large and small volume applications.
 
Company ID: 79311 - Click Here for Full Details
Product Lines:
Metal Stampings, Machined Parts, Plastic Parts Assembly. 
 
Target Markets:
Electronics Industry, Equipment OEMs, Appliance Industry, Automotive, etc. 
 
Sales Opportunity:
Sales opportunities to many varied industries using custom metal and plastic components. Manufacturing support includes over 450 workers, paint and finishing facilities, excellent quality control. Sales opportunities in most territories.
 
Company ID: 90178 - Click Here for Full Details
Product Lines:
Elegant Polyurethane Mouldings, Brackets, Louvers, Shutters, Window Heads, and Structural Railings Systems.

Distressed Rough Sawed and Hand Hewn Simulated Wood from "Early America". A Line Replicating the Delicate and Skeletal Membranes seen in real Brain Coral, Wire Coral, and Antler Coral. 
 
Target Markets:
Creation of New sales Accounts and Servicing of Existing 1 Step and 2 Step Distribution within the Designated Territory. Introducing new and enhanced product being designed and created to all the channel's of distribution, architects and builders. 
 
Sales Opportunity:
You will work with a company that has for the past 5 consecutive years shipped every order 100% on time. A company, proud to say we are 100% made in the USA. A company known for it's integrity, quality, attention to the customer and driven to excel in every aspect of servicing it's customer base as well as their customer's. A company that offers, custom building abilities for those "special" jobs that you must just have, as well as a company having the shortest lead times in this product category; 5 working days for all web and catalog orders.
 
Company ID: 105064 - Click Here for Full Details
Product Lines:
DewPoint RH% Analyzers, Transmitters, & Probes Compressed Air/Dryer Alarm Systems, Trace Moisture Analyzers, Atmospheric Condition Hygrometers, Precision Humidity Chambers, Engine Test Cell Hygrometers, Chilled Mirror, and Polymer Sensors.

For sale or rent. Made in USA. 
 
Target Markets:
Industrial, Pharmaceutical, Medical, and Metrology Industries, Users of Dry Air/Gases, Private/Government Laboratories, Users of High Precision Moisture Analyzers, Calibration Laboratories, Field Calibration Service Providers, Compressor Manufacturers, Gas Dryer Manufacturers, End-Users, and OEMs. 
 
Sales Opportunity:
A global leader in the design and manufacture of chilled mirror hygrometers and other moisture measurement and calibration devices. The company is seeking aggressive manufacturers representatives in Alabama, Alaska, Arizona, Arkansas, northern California, Colorado, Florida, Georgia, Louisiana, Maryland, Missouri, New Mexico, Minnesota, Mississippi, Montana, New Jersey, Oklahoma, Oregon, Eastern Pennsylvania, South Dakota, Texas, Utah, Virginia, Washington, and Wyoming wishing to add a domestically manufactured and supported, premium analyzer line to their portfolio. Also seeking representation in South and Central Americas.
 
Company ID: 104079 - Click Here for Full Details
Product Lines:
Plastic Injection Molding
CNC Machining
Sand Blasting
Shot Peening
Mass Finishing 
 
Target Markets:
Aerospace, Medical, Defense, Automotive, and more. 
 
Sales Opportunity:
AS9100C Certified company looking for new product lines. Family owned and operated for 50 years. No job too small, will do one of parts in the CNCs and no minimum quantity for Injection Molding.
 
Company ID: 103498 - Click Here for Full Details
Product Lines:
Our Company Manufactures all Types Terminal Blocks.

Commercial-Standard Single & Double Row, Military Terminal Blocks & Aircraft, Terminal Blocks, Terminal Block Accessories, all Type Jumper Marker Strips Standard & Custom, QC Tabs for Electrical Connections, Custom Molding, Metal Stamping. 
 
Target Markets:
Electrical, Electronics, Aerospace, and Military Markets. 
 
Sales Opportunity:
Our company has been in business for over 40 years and would be an opportunity for a small or mid-size rep organization. We offer our customers, Good Pricing, Quality Products, Delivery, And Dependable Service.
 
Company ID: 103273 - Click Here for Full Details
Product Lines:
Metal Stamping and Screw Machine Products. 
 
Target Markets:
Buyers. 
 
Sales Opportunity:
I am writing to introduce our copmany, an ISO Certified metal stamping manufacturer that specializes in custom parts, CNC turning, CNC milling with ”Just In Time” inventory, and a consignment program to meet your company’s needs.

At our company quality is the number one priority, along with cost-effective products and same-day turnaround on your Hot Rush requirements. We have the ability to run 24/7 with fully automatic bar feeders attached to our screw machines. We also have a complete tool and die shop on the premises, which allows us to do all of our own tool making and maintaining in house.

Our presses run from 5-110 tons, with the largest measuring up to a 48” bed. We also have the ability to do multiple-component assembly, finishing, and even stocking for customers who meet minimum purchase requirements. What’s more, we deliver anywhere in the tri-state area with our own trucks.

A representative from our company will contact you shortly to learn more about your metal stamping, machining, and assembly requirements. We hope you will take a moment to speak with them, and we look forward to meeting with you soon.
 
Company ID: 64844 - Click Here for Full Details
Product Lines:
Plastic Injection Molding.

Thermoplastic Molded Products for all Industries, Optics and Clear Molded Parts, High Strength Mechanical Parts, High Tolerence Parts, and Insert Molding. In-House Mold Making Capabilities. 
 
Target Markets:
Electronic, Sensors, Optical, Material Handling, Automotive,Heavy Equipment, Medical, Dental, Fire Protection, Safety, General Industry. 
 
Sales Opportunity:
We are a high quality thermoplastic injection molder that has a great reputation for Servicing our customers. We have been in business for 27 years and have experienced a good growth track record. We have Openings for Reps that would like to work directly with the owners of the company.

Our Company is ISO9001:2008 Certified.
 
Company ID: 77328 - Click Here for Full Details
Product Lines:
CNC Machining Components, Stamping & Fine Blanking, Screw Machine Parts, All Type of Castings, Powder Metallurgy Parts, Plastics Injection Moulding Parts, Excellent Manufacturing Facilities, Very Competitive Price. 
 
Target Markets:
OEM’s, Auto Parts Manufacturer, Wholesale Distributors, Machine Shops, Construction Industry, Contractors, Power Coating & Paint Facilities, Electrical, Electornics, Medical and Aeronautics Components and Equipments Industries. 
 
Sales Opportunity:
We have very wide range of International and Local Qualified Supplier. Those are ISO and TS Certified. We are dealing with suppliers from all over the world. We can offer very competitive price with very good quality. We offer standard commission. We also offer Special incentives for target sales.

***Special Commission Package for 2013***

This is for calendar year starting 1st Jan 2013 to 31 Dec 2013:
$0 to $250,000 6%
$251,000 to $500,000 7%
$500,001 to $1,500,000 8%
Anything above the $1,500,000 8%+2% bonus!!
 
Company ID: 82119 - Click Here for Full Details
Product Lines:
Medium to Heavy Fabricated and Machined Products/Attachments for Construction Equipment, Tractors, Excavators, Railroad Cars, Mining Equipment, etc. 
 
Target Markets:
Construction Equipment Manufacturers, Locomotive Manufactures/Rail Car Manufactureres. Road Construction Attachment OEM's, Mining Equipment Manufacturers. 
 
Sales Opportunity:
Our company is in process of expanding our Capabilities. We are currently suppliers to large OEM"s like Caterpillar, Deere, Bomag Americas, Electromovtive. With the increased capacity we are creating at our facility, we finding a need for a seasoned rep. We are seeking an individual who has the contacts and experience in the construction equipment manufacturing areas of the industry.

We need help taking our company to the next level with steady production type products of either a simple or complex nature. We are open to a generous commission base for the right individual. We staff in house engineereing and are ISO 9001 certified. We have been in business for nearly 30 years.
 
Company ID: 111640 - Click Here for Full Details
Product Lines:
1. Customized PoS Marketing Items especially for the Beverage Industry (Bottle Glorifiers, Ice Buckets, Blackboards, Serving Carts, etc.)
2. Customized PoS Marketing Items in diverse Materials such as Wood, Plastic, Metal, Acrylic, etc.
3. A Line of Standard Products for Use in the HORECA Sector. 
 
Target Markets:
1. The Big Players of the Beverage Industry (Manufacturers and Distributors).
2. Advertising Agencies, especially those who Work for the Big Players of the Beverage Industry.
3. All Kinds of Companies that Use PoS Merchandising.
4. The HORECA Sector. 
 
Sales Opportunity:
We have over 40 years of experience, working for leading companies all over Europe. Many of those are strongly related to their parent company in the US. We are looking for a sales representative who can build the bridge between Europe and USA.

A new, ecological line of products will soon be launched and we are convinced that those ecological products "made in Europe" will open doors and give you the possibility to establish long-lasting client relations that ensure profits over years.
 
Company ID: 111589 - Click Here for Full Details
Product Lines:
Microscopic Laser and TIG Welding Services. 
 
Target Markets:
Tool and Die, Medical, Aircraft, Electronics, Plastic Injection Molding, Blow Molding, and Prototyping. 
 
Sales Opportunity:
Ours is one of the the first companies to specialize in the micro welding of tools, dies and molds. Utilizing the latest techniques and modern equipment, our team of skilled micro welders are able to provide precision micro-welding, involving your most common or complex repairs. We understand downtime is costly.

Therefore, fast, dependable service at competitive prices is our top priority. Tool & Die welding is always a challenge. We strive to fill any and all needs that may arise, including the smallest microscopic welding requirements to larger injection molds. We have extensive knowledge and experience in metallurgy, therefore each job is evaluated to ensure the correct filler material is used to yield the highest quality, longest lasting repair.

We are new to the Sales Rep. Culture, but we adapt well! Proper commission will be put in place for reps who produce. We recognize the hard work ahead and are ready for change!
 
Company ID: 111430 - Click Here for Full Details
Product Lines:
GRBA
Spinner Long
Sinner Round
Boxes 
 
Target Markets:
Wholesales 
 
Sales Opportunity:
I found your contact on the web. Please allowed me to introduce ourselves
We’re looking for Manufacture Representative in the US. I am the owner of our family Company from Serbia. We are producers of metal spoon lures and other fishing tackle products.
We have our own production in Serbia, and our orientation is best quality products with good price.

Our main product is a metal spoon. Has a long tradition in our area. It has unique angles and singular movement in the water, and it provokes all kind of predator fishes.
This is unique spoon on the worldwide market, and we have legally protected the shape and design in the Europe.

We are also producing Spinners, plastic boxes, lead products, blister packing... In our manufacture range we have CNC machines, presses, galvanic metal protection and other production machines.
With possibility to develop any kind of metal lures and other products for your reference and request. It would be great honor for us to cooperate with you, or produce for your company with your brand mark. With our technology, development, cheap raw materials, cheap manpower... In Serbia, we can produce quality products for good price.

Enclosed you can find our catalogue, export pricelist, and range of the products in excel form with all characteristics. I would be very glad to send you our promote box with samples for your check if you agree.

Looking forward to hear from you,
Kind regards
 
Company ID: 111202 - Click Here for Full Details
Product Lines:
Our Main OEM products are Drains, Pans, Mosaic Mesh, Drainage Accessories, etc.

Especially for the Shower, our Main Special Product is a Quick and Easy Installation, Fits Standard Wall Framing, Waterproof (Plastic Injection Moulding), Will Not Mildew, Rust, or Leak. Ready for Tile. 
 
Target Markets:
Bathroom Decoration Companies, home Remodeling Companies, Furniture Companies, Retailers, Dealers. 
 
Sales Opportunity:
We are a company committed to the design and manufacturing of plastic materials for construction. We are engaged in mold construction and injection and blow molding. Based on the experience of molding and design service for companies abroad in construction and an R&D team, we begin to design and manufacture our own brand building materials since the beginning of 2013.

Our 1st batch of products are sump gratings, mosaic tile grids, shower niche and tool accessories. We're planning to develop several product scopes as shower pans, trays, shaving steps and some other products which are welcome in the shower. Our goal is to make your shower room simpler and easier with good appearance.
 
Company ID: 110957 - Click Here for Full Details
Product Lines:
Anti-Microbial featurestic Seat Belt Covers. 
 
Target Markets:
Airlines, Autos, and Amusement Parks. 
 
Sales Opportunity:
It may be appreciated that there is a continuing need for a new and improved vehicular, airplane, and amusement park device seat belt covering to overcome the problems of microbial transmission to the seat belt during exposure to extensive contamination and which may be further compactly and readily secured on the seat belt.

The majority of seat belt in cars, buses, boats, and amusement park attractions last for the life of the device are contaminated by numerous pathogenic bacteria. Because traditionally set belts can not be effectively cleaned as any other of the vehicles or devices. This invention thus solves the problems associated with the protection of individuals from infection diseases spreading by touching and body contact with seat belts.
 
Company ID: 110881 - Click Here for Full Details
Product Lines:
- Precision CNC Machined Tooling, Parts, and Assembly Fixtures
- Precision Medical EDM Machined Metals Parts and Plastic Molding Products
- Precision Automobile Machined Metals Parts and Plastic Molding Products
- Precision Aerospace Machined Metals Parts and Plastic Molding Products 
 
Target Markets:
- Medical OEM Manufacturers
- Automobile OEM Manufacturers
- Aerospace OEM Manufacturers 
 
Sales Opportunity:
- West Coast regions, new accounts development.
- East Coast regions, new account development.
- State-of-the art manufacturing facilities both in US and China for prototype support and high volume production.
- High sales commission with long-term commitments
- Future internal Sales position available
- Small profitable operations with Sales ~ $2M per year
 
Company ID: 110722 - Click Here for Full Details
Product Lines:
Vacuum Heat Treating Furnaces and Automated Vacuum Furnace Systems. 
 
Target Markets:
Gears, Bearings, Automotive Transmissions, Automotive Axles, Commercial Heat Treating, Medical Devices, Consumer Tools, Industrial Tool and Die, Aerospace, Fuel Injection, Vacuum Brazing, Vacuum Carburizing, Vacuum Hardening. 
 
Sales Opportunity:
Our company has World Proven Technology in the niche vacuum furnace industry and an impressive installed base in the NAFTA region. This is a unique opportunity for a long term, exclusive agreement for equipment sales and part sales.
 
Company ID: 110661 - Click Here for Full Details
Product Lines:
* Ambient Temperature Distribution Center in San Diego Shipping Weekly to Most Major Retailers in the US (Drug, Dollar, Mass, Clubs, eComm).
* Blister Packaging and Pad Printing Operations in Tijuana.
* Pick/Pack and Display Building Services.
* Excellence in On Time Delivery to Retailers 
 
Target Markets:
Suppliers/Vendors with Product Manufactured in Asia, Mexico, or the Southwest US that Ships in Quantities that would be Parcel or LTL that could be Master Billed Together with Existing Products to Improve their Overall Supply Chain Expense. 
 
Sales Opportunity:
The DC and manufacturing locations have a proven track record of performance. The opportunity is to leverage the untapped capacity in the existing network to provide suppliers the opportunity to improve their supply chain performance by joining an existing facility. The element that sets the company apart from other logistics providers is access to packaging expertise and weekly shipments to most major retailers in the US when many providers focus on specific retailers.
 
Company ID: 110500 - Click Here for Full Details
Product Lines:
Manufacturer of Color Concentrates and Compounds in Plastic Pellet Form.

For ABS, Polyethylene, Polypropylene, Polystyrene, PVC, PET, PETG, Nylon, and other Various Resins. Color Concentrates in All Colors. Color Consulting and Chip Molding. 
 
Target Markets:
Profile Extrusion, Sheet Extrusion, Injection Molding, & Blow Molding. 
 
Sales Opportunity:
Seeking manufacturer's reps throughout the U.S. to represent our color concentrates to potential customers. Would be a great added opportunity to reps already representing resin suppliers to above target markets.
 
Company ID: 110484 - Click Here for Full Details
Product Lines:
Molding, Extrusion and Calendering Parts:
- Rubber Keypad/Assembly Keypads/Membrane Keypad
- Silicone Components for Automotive Application
- Rubber O-Ring, Seal, and Gasket
- Silicone Sheets with Different Application 
 
Target Markets:
Automotive, Medical, Electronics Fields 
 
Sales Opportunity:
We are a major silicone material distributor and also an active silicone products manufacturer Certified with ISO 9001, TS 16949, and ISO 14001. With decades of experience in the silicone field, we have the ability and capacity to provide a wide range of silicone products in different industries.

- Sample available upon request
- Training materials
- Commission: To be discussed
 
Company ID: 110256 - Click Here for Full Details
Product Lines:
1. Injection Molding Parts for Medical Devices like Eye Spear (ENT), Silicone Facial Masks, Mouth Bite, Knife Light for Surgery, Pharyngeal Function Trainer, Nasal Aspirator for Pediatrics.
2. Injection Mold Fabrication Service for any Molding Tools.
3. Laboratory Consumables, for example Cell Strainer. 
 
Target Markets:
Contract Manufacturing, Retail, Trade Companies, Laboratory Study Centers, Hospitals, Healthcare Centers. We Cccept Few Quantities with New, Complex Design. It's more challenging. 
 
Sales Opportunity:
Built in 1981
36+ years of experiences in injection molding manufacture
Flexible production arrangement
Rapid development schedule
ISO9001/ISO13485/GMP qualification
Certified cleaning room for manufacturing and injection molding
Auto-packing and labeling if the quantity is large
Sterilization arrangement

When Doctors have great ideas on creating or improving the medical tools and devices, we are here to help achieve the products in mass production. Even the demand is few in the beginning, we are willing to cooperate to develop your project as soon as possible. Rapid prototyping service is always helpful for you to start the business. Then, we can design a suited molding tool for good quality and efficiency MP.

About your commission, as the cost here is more competitive than your local, we can share the profits with you as much as we can. Win-Win is what we always want to achieve.
 
Company ID: 110192 - Click Here for Full Details
Product Lines:
We Began 30 years ago Manufacturing Cast Urethane Products to the Oil and Gas Industry.

Since then We have Branched into Many Other Markets that Use our Products. Our Parts include Cast Urethane Rollers, Pipe Rack Strips, Traction Pads, Roller Racks, Spacers, Tubes, Sheeting, Bar Stock, etc. 
 
Target Markets:
Oil and Gas, Pipeline, Agriculture, Horizontal Directional Drilling, Offshore Marine Construction, Automotive, Machining and Equipment, Automotive, Mining. 
 
Sales Opportunity:
We offer a very broad range of cast urethane products that are used in many different markets. We offer extremely competitive pricing and very quick turnaround times.
 
Company ID: 106418 - Click Here for Full Details
Product Lines:
Turning and Milling. CNC Machining. 
 
Target Markets:
Medical, Aerospace, etc. 
 
Sales Opportunity:
New startup. Very experienced, enthusiastic and very competitive. We will be able to win quotes and make sure you are compensated for your work accordingly.
 
Company ID: 110090 - Click Here for Full Details
Product Lines:
Drills, Hole Saw for Construction Sites 
 
Target Markets:
Distributors for Hardware, Tools, Home Centers for DIY. 
 
Sales Opportunity:
Ours is a well known Japanese manufacuturer that prodcuces hole saw and drills. We are now serching sales reps who can distribute our products all over North America. Of course from time to time, Unika's sales staff can attend reps to promote our goods directly, if interedted in our company, we are waiting for your contacts. thank you.

The below is our Introduction:
We have continued to develop our global management strategies by solidifying our foundations as an internationally competitive company. We have already initiated our optimum production plan under a tri-polar system of Japan, China, and Vietnam as production bases.

We intend to continue to make leaps forward with a view toward further development and innovation, by providing work tools indispensable to industrial activity and infrastructure and directing our efforts toward development of technology to produce highly functional and highly environment-responsive products as well as focusing on market needs. We look forward to your continued support and appreciation for our products.
 
Company ID: 110064 - Click Here for Full Details
Product Lines:
Checkweighers
X-Ray
Serialization 
 
Target Markets:
Food & Pharma 
 
Sales Opportunity:
Sales Opportunity to sell quality German made checkweighers, X-Ray, and Serialization equipment to the food & Pharma market. Established technical service after the sale. Looking for established reps in Canada. Please submit a sales inquiry for more information.
 
Company ID: 97283 - Click Here for Full Details
Product Lines:
Machine Tool Protection Products
- Way Covers
- Bellows
- Roll Up Covers
- Way Cover Repair
- Way Wipers 
 
Target Markets:
Our Products will market to:
OEM Machine Tool Builders
Integrated Suppliers (Resale)
End-User Market (from Large Automotive and Aerospace to Small Machine Shops)

The Target Audience varies from Engineers to Buyers to Maintenance Managers. 
 
Sales Opportunity:
From sales to engineering to manufacturing we have the experience to bring best in class customer service to an industry desperate for a quality supplier.

We offer attractive commission rates:
- OEM 5%
- Resale 10%
- End-User 15%
 
Company ID: 108485 - Click Here for Full Details
Product Lines:
Certified Woman Owned Small Business Plastic Injection Molding Manufacturer.

Specializing in Close Tolerance Molding, Gas Assist Molding, Over Molding, Insert Molding. Registered Medical Manufacturer. Certified ISO 9001:2008 also AS91C Certified. 
 
Target Markets:
Sub-Contracting with Government Primes, Non-Clean Room Medical, Small Auto Parts, Connectors, Building Industry, Housewares, etc. Also, have a Proprietary Small Window Line. 
 
Sales Opportunity:
I need someone that will take as much pride as I do in growing my business. So, I need an "Honest" and "Hardworking" individual that can produce results. I look forward to meeting that person.
 
Company ID: 109355 - Click Here for Full Details
Product Lines:
We Manufacture World Class Technology in Injection Molding Machines with High Performance, Energy Efficient Machines, Hydraulic, Hybrid, and Full Electric from 20T up to 4,500T.

We Service North America from Newnan, GA, where we Carry a Full Line of Spare Parts for Quick Delivery. 
 
Target Markets:
Our customers are All of Companies that Manufacture Plastic Parts Through the Injection Molding Process. 
 
Sales Opportunity:
We are the Injection Molding Machine branch of a larger company, a very reliable, outstanding company, that is devoted to continuous improvement. We are a global leader in the areas of industrial electricity, electronics, materials, machinery, components, and energy.
 
Company ID: 109611 - Click Here for Full Details
Product Lines:
We Supply Superior Quality Special Purpose Machinery to the Plastics and Manufacturing Industries.

We Own Patents Pertaining to Several Innovative Products such as our Scanning System to Inspect Parts Prior to Processing, which Eliminates Scrap and Improves Overall Equipment Effectiveness. 
 
Target Markets:
The Increased Use of Plastic Materials in Modern Vehicles Provides an Ongoing Opportunity to Supply Automated Machinery to Manufacturers a Variety of Parts for Exterior, Interior, and Under-Hood Applications within the Automotive and other Industries. 
 
Sales Opportunity:
Today, more and more other industry segments, such as heavy duty trucks, farm equipment, boats, and recreational vehicles are converting many more components to plastics, offering additional opportunities for plastics welding and finishing machinery suppliers. Examples of equipment available from us are: two and three dimensional vision systems for part contour measurements and adaptive tooling, hot plate, infrared and ultrasonic welders and tooling (ultrasonic-horns), robotic assembly equipment, special-purpose drilling and machining systems.
 
Company ID: 109032 - Click Here for Full Details
Product Lines:
Tooling, Production, Automation Machinery, Heavy Equipment, OEM Parts, Injection Molding, Die Cast, Secondary Finishing, PCBA, Electro-Mechanical Assembly, Software.

Chemical, Automotive, Automation, Medical, Vending, IoT, Industrial Milling, Commercial Beverage, Electronics, and more. 
 
Target Markets:
Target OEM Employees in the following roles: Engineers, Engineering Manager, Vice President of Engineering, Sourcing, Sourcing Managers, Supply Chain Managers, etc. 
 
Sales Opportunity:
Time is up for making simple bids. It's time for you to provide consultative solutions with the most supportive design, engineering, and manufacturing team out there.

Think It. Make It.
Your go-to manufacturing company for sustainable solutions. Linx is a contract manufacturer driven by our design and engineering consultancy. Think of Linx as an extension of customer operations. Our company helps clients achieve their business and engineering goals through transparent communication and expert problem-solving.

Our hybrid project teams are comprised of project managers, designers, engineers, suppliers, quality teams, and business unit leaders who work together to reach common goals with agility and tenacity. Our clients are collaborators with a voice in each communication.

We provide the very best engineering and manufacturing China has to offer. We are a team of thinkers and doers who challenge the status quo in order to provide the right solutions. Our innovation team spans from UK to Chicago to Dongguan.

All locations are ideally located to serve customers in the United States/Europe and manage suppliers in China. Ours is a family-owned and operated company. We care deeply about each other and the work we do. As a Linx representative, we will treat you with respect and support your sales, even after closing. Commission negotiable.
 
Company ID: 109227 - Click Here for Full Details
Product Lines:
Precision Plastic Injection Molding Products, Contract Manufacturing, and Assemblies/Packaging.

Product Designs and Development, Engineering Services, Mold Making, Precision CNC Machining, Electronics Manufacturing Serving Defense, Automotive, Aerospace Markets. 
 
Target Markets:
Medical, Aerospace, Defense, Custom Markets. 
 
Sales Opportunity:
This is a unique growth opportunity to represent both Plastics, Metal, and Electronics industries. Our manufacturing facility is comprised of 60,000 sq ft combined office manufacturing and assembly areas. Opportunity exists to grow with company, and work with motivated company employees.
 
Company ID: 109187 - Click Here for Full Details
Product Lines:
State of the Art Engineering Services including: Mold Flow Analysis for nearly all Plastics Processes, Finite Element Analysis, Mold Design, Part Design, Product Development, CT Scanning. 
 
Target Markets:
OEM Companies with a Demand for Plastic Components (Medical Device, Automotive, Aerospace, and others). Injection Molders, Mold Makers, Packaging Manufacturers, Design Firms. 
 
Sales Opportunity:
Our company is an ideal fit for a rep group calling on major OEMs selling plastic components. I was a manufacturers rep for over 15 years. I know the challenges you face every day. Our advanced engineering services are a compliment to the lines you carry now. Our company has been in business for over 25 years. Our engineering staff has a minimum of 25 years in the plastic molding industry.

I joined this company after 15 years of recommending it to my OEM customers. My customers always thanked me for introducing them to this company. The President asked me to join the company three years ago and I have never looked back. We had record sales in 2015 and again in 2016. Our sales YTD in 2017 are well ahead of our record setting pace in 2016.

We are looking for sales coverage in selected regions in the US and Canada. We need rep organizations that are experienced in selling plastic components and assemblies. The collateral benefit for the successful rep group is becoming involved in new product designs in the early phase of design development.

Currently, our regional focus in North America is the Southeast, West of the Mississippi River, and Canada. We will provide point-of-sales aids and leads using a variety of lead generation tools. We are looking for the successful rep groups who are ready to be a part of our record setting sales performance. We look forward to hearing from you!!
 
Company ID: 103524 - Click Here for Full Details
Product Lines:
Plastic Extrusions - PVC, Flexible PVC, Polypropylene, Hips, Nylon, Abs, Polycarbonate, Polyethylenes.

Heat Folding
Die Cutting
Fabrication
An Array Of Other Secondary Operations 
 
Target Markets:
Retail, Pop, OEMs, And Custom Markets. 
 
Sales Opportunity:
We are a small, family owned business with the knowledge and talents of a large business. Recently moved from a 30,000 sq. ft. Building to a 55,000 sq. ft. Facility. We added three extruders at this time for a total of eleven and our capacity is currently ready for any program. In-house design and tooling room allows for a quick turnaround for all customers, not to mention everything is designed and produced under our roof. Please come rep for a small, growing business that is run like a family, by a family!
 
Company ID: 109044 - Click Here for Full Details
Product Lines:
Our Company has Several High Production Machines including Swiss Screw Machines and Hydromat Rotary Transfer Machines.

Also Several Secondary Machines with Pallets for Milling. 
 
Target Markets:
Possible Markets Include Automotive, Military, Fasteners, and Any Industries in Fluid Management. 
 
Sales Opportunity:
After 65 years and 6 acquisitions we offer a broad range of capabilities. On time delivery and quality with a record to prove it. Deal direct with president for negotiations, available all hours to support your efforts.
 
Company ID: 109024 - Click Here for Full Details
Product Lines:
1 to 35 Ton Fast Pierce Stamping Presses and Complete Systems that Uses a New, Adiabatic Process which Improves the Parts Quality and Tool Life 500% or more.

Adiabatic Stamping Reduces the Forces on Tools by 50%-60 % which Reduces Rollover, Spring Back, Burr, and Dramatically Improves Edge Quality. 
 
Target Markets:
All Facilities that Stamp or Shear Hard Metals, Composites, etc. that Desire to Lower Energy Costs, Reduce Tool Sharpening, and Process Costs. Automotive, Medical, Military, Aeronautics, System Builders, Integrators, Machine Builders, Clean Room, and Stamping Facilities. 
 
Sales Opportunity:
Our fast pierce press systems reduce punch forces, making it possible to stamp the hardest Boron steels, Titanium, and Composites which frustrate manufacturers. We've also been able to punch smaller holes in thicker materials than conventional stamping methods.

Improved parts and reduced spring back can solve many of your customers problems and reduce costs. We offer free samples using the customer's materials and tooling. Our presses are oil free, have a small footprint, and are energy efficient. We offer extensive sales engineering help plus competitive compensation.
 
Company ID: 108945 - Click Here for Full Details
Product Lines:
Plastic Resins - Both Virgin and Reprocessed. 
 
Target Markets:
Most Any Type of Extruding or Molding Company that Uses Raw Resins and Compounds such as: Flat Sheet/Roll Extruders, Profile Extruders, Injection Molders, Blow Molders, Rotational Molders, Wire and Cable Coating Companies. 
 
Sales Opportunity:
We are a relatively new international distributor of Plastic Resins. With over 1,300 materials available and over 100 years of combined experience, our expert sourcing and logistics team can satisfy your customers resin requirements. Whether stock or custom blends, we have extremely competitive pricing that includes a generous and simple commission plan. We are a US company, currently have 5 Representatives on the team and looking to rapidly expand.
 
Company ID: 108909 - Click Here for Full Details
Product Lines:
Multi-Function Bag Clips for Bread, Potato Chips, etc.

Other Similar Household Items. All Items are Biodegradable and Food Safe. 
 
Target Markets:
Grocery Stores, Supermarkets, Kitchen Specialty Stores, Gift Stores. 
 
Sales Opportunity:
I have an opportunity for the right individual to grow with our new company. Our company was formed wit a promise to give back selflessly and to reach out to those in need. Products are fun and simple, which makes them easy to sell. Profit is in the volume. We are a startup so this would be a 100% commission job with no benefits (will have in future).
 
Company ID: 108669 - Click Here for Full Details
Product Lines:
Hardware for the Window and Door Industry. 
 
Target Markets:
Manufacturers, Glaziers, Glass Shops, Wholesalers. 
 
Sales Opportunity:
This job provides the opportunity to travel and generate as much revenue as you are capable of. We are looking for people who are capable of working independently and with drive. This is a great opportunity to work with a brand that has been around for over 30 years and to be a big part in it's expansion across the USA.
 
Company ID: 108617 - Click Here for Full Details
Product Lines:
Custom Plastic Injection Molder.- Western U.S
Also, Manufacturing Industrial Buckets, 5-1 Gallon Pails
Custom Printing on industrial Buckets 
 
Target Markets:
Companies that Need Proprietary Injection Molding, Companies that Need 5-1 Gallon Industrial Plastic Buckets, Custom Printing on Buckets. 
 
Sales Opportunity:
Represent a 47+ year old plastic injection molder. We are seeking sales representative covering western U.S. Latest injection molding machines and equipment. We own our own land, building, equipment, etc. Located in San Diego area. High percentage of repeat sales. Long or short runs, also mold capability. Highest quality standards. Submit a sales inquiry to us.
 
Company ID: 108533 - Click Here for Full Details
Product Lines:
CNC Toolholder, Workholding Vises, Live Centers, Dead Centers, Tapping Holders, Shrink Fit Holders, Shrink Fit Machines. 
 
Target Markets:
Industrial Distributors. 
 
Sales Opportunity:
New manufacturing import of high quality Tool holder and machine tool accessories. Products are made in India and Germany. Well known owner of our company has over 30 years experience in industrial products sold through industrial distribution.

Understands industrial distributors, end-user target markets, and key products required to today's demand manufacturing processes and industrial distribution's needs for product training and product support. Extremely competitive list pricing and distributor discount structure. Excellent commission plan for a manufacturer rep wanting something different in a quality tool holder and work holding product offering
 
Company ID: 108413 - Click Here for Full Details
Product Lines:
CNC Machining, Large Scale Surface Grinding, CNC Swiss Turning. 
 
Target Markets:
Automotive, Food Equipment, Bridge Construction, Railroad, Tank Car Manufacturing, Mining, Heavy Equipment. 
 
Sales Opportunity:
We are a full service aching and grinding shop. We've been in business 20 years working on a variety of components for all markets. Our quality and lead times speak for themselves.
 
Company ID: 108274 - Click Here for Full Details
Product Lines:
Plastic and Metal Machining
Thermoforming & Vacuum Forming
CNC Milling w/ 3 & 5 axis capability
CNC Turning w/ live tooling
Assembly
Painting
Bonding
Mold, Die, & Tooling Fabrication
3D laser scanning capabilities
Reverse engineering capabilities 
 
Target Markets:
Aerospace & Aviation
Agricultural
Defense
Energy
Fitness
Industrial
Marine
Medical
Recreational
Transportation
Commercial / OEM 
 
Sales Opportunity:
Specializing in custom thermoformed plastics and metal machining, Fiber Pad has the facility, expertise, and technology to manufacture quality vacuum formed products to your specifications. With over 40 years of experience, our engineering and production teams will work closely with you to ensure your required specifications are achieved, from concept to completion.

We are as committed to our outstanding sales team as we are to the customers they bring in. Your success is our success. Give us a chance to prove how we can be your most valued partner in business.
 
Company ID: 108182 - Click Here for Full Details
Product Lines:
Injection Molding, Tooling, 3D Printing, Chinese Tooling, Automotive Quality, Molding in USA and China. 
 
Target Markets:
Automotive, Industrial, Sporting Goods, Consumer Products. 
 
Sales Opportunity:
Looking for commision based representation. Low volume and prototype injection molding to 128 tons in USA, production molding in China, tooling in China, 3D printing in USA.
 
Company ID: 108106 - Click Here for Full Details
Product Lines:
Laser Engraving, Laser Marking, Laser Cutting, 3D Metal Printing. 
 
Target Markets:
Automotive, Defense, Aerospace, Military, Industrial, Medical, Biotech, Manufacturing. 
 
Sales Opportunity:
Our company is the leading industrial Brand in high-tech laser systems for laser marking, laser cutting, laser engraving and other material processing applications. Our systems are used by manufacturers in the automotive, aerospace, industrial, defense, electronic, semiconductor, flat panel and medical industries around the world.

Our brand of products is associated with a number of worldwide licenses and patents for innovative and ‘unique to the industry’ laser products and technologies. This brand is associated with better throughput, higher quality and low cost of ownership for each of our products. We are raising the standards and working toward making everyone’s life simpler through each laser application.

Our brand of products has, for more then 2 decades, been the industry standard work horse of laser subtractive material processing for such world renowned companies such as: Sony, NIKE, 3M, Delphi, NNSY-Norfolk Naval Shipyard, NASA, Cannon Air Force Base, Eaton Aerospace, GE, Caterpillar, Harley Davidson, PPG, Eli Lilly, Smith and Nephew, Millipore, DuPont, Bosch, Gables Engineering, Champion Aerospace, Smith Aerospace, Metaldyne, Dupont, and Heraeus.
 
Company ID: 107453 - Click Here for Full Details
Product Lines:
Shower Enlosure & Accessories
Faucet
Tile Decoration 
 
Target Markets:
Sell to a Shower Companies, Wholesalers. 
 
Sales Opportunity:
We are a manufacturer and have been in the exporting business for over 13 years. So we know the market. Sales Representive can take a percentage of sales volume as commission on every order.
 
Company ID: 107715 - Click Here for Full Details
Product Lines:
We Produce in Mold Labels for Durable Goods, Emblems/Dome Decals, Decals, Labels, and Overlays.

We have a somewhat Unique Capability to Supply Screen-Printed Decals/Labels on Rolls, Sheets, or Individual Pieces. 
 
Target Markets:
We are Focusing our Efforts to Expand in the Appliance/HVAC, Equipment Markets such as Fuel/Oil Dispensers, Powered Equipment, Construction Equipment and Tools, and Overlays for Electronics. We are also Focusing on Injection Molders that Utilize IML Inserts. 
 
Sales Opportunity:
Our company has traditionally focused our efforts on companies in the Great Lakes and Midwest regions. Our goal is to expand into Texas and South Central US, including the border regions. We are customer centric and focus on providing superior customer service including rapid response to commodity management challenges and technical support.

Our company is family owned and operated and the family members are involved in all aspects of the business operations. We are seeking Representatives to join our family/team culture. Our commission structure is 10% for screen printed products and 5% for flexo products.
 
Company ID: 34919 - Click Here for Full Details
Product Lines:
We are a Full Service Mold Building Company.

We Offer Plastic Injection Mold Building Services, Custom CNC Machining, Production Machining, CNC EDM & Wire EDM Services. Our In-House Welding Department also offers Full Fabrication Services. 
 
Target Markets:
We have built our business on the Precision Optical and Safety Optical Markets. This is an Area that we would like to Continue to Grow. We have Built 2-Shot Molds for the Medical Industry and eagerly want to Expand this Business. Consumer Products is also an Area of where we want to Grow more. 
 
Sales Opportunity:
We are a small company that was built on hard work, honesty, integrity, high quality and customer service. We strive to adhere to the lean manufacturing values and keep our overhead low. We contribute back to the community through various charities. We are looking for an aggressive sales rep to uphold our values and grow with us. At the present time this is a commission only opportunity. The right candidate will be able to grow into the Senior rep as we continue to grow and there will be an opportunity to increase the sales commission and/or receive a salary.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2017
LINKS | SITE MAP | TERMS OF USE