Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Transportation
Sub Categories:
   Automobile
   Products & Services
   Aerospace / Aviation
   Truck / Trailer Equipment
   Motorcycles
   Dangerous Goods
Click on Company ID to View Full Details
Company ID: 28698 - Click Here for Full DetailsUpdated
Product Lines:
US EPA Tested, Award Winning Green Product.

Performs Multiple Jobs in One Step. Eliminates Solvent, Acid, Phosphate, Chromate & Blasting from the Metal Surface Preparation Process. Completely Prepares the Metal Surface for Welding and Finishing. Provides Years of Indoor Rust Protection. 
 
Target Markets:
Metal Fab, OEM, Car Part Manufacturer, Machine Shop, Stamping, MRO, High Temp. Coating, Rebar coating, Industrial Supplier, Painting, Powder Coating, Welding, Steel Tank Manufacturers, Pressure Vessel, Media Blasting, Defense, DOT, Marina, Construction, Utility, Oil & Gas, Mining, Agricultural, etc. 
 
Sales Opportunity:
Looking for Sales Rep in USA, Canada & Mexico. Exclusive Distributor for other countries. Huge market with no competition.

Product developed & Made in USA. Complete "Green Technology & Process". Good Commission rate. Complete Product Training & Technical Support will be provided along with free Product Sample, Brochure, etc. This is the only Conversion Coating which performs multiple jobs in one step and works on any Ferrous & Non-ferrous metal at room temperature without rinsing. Complete metal surface preparation in one step. Eliminates blasting of new metal before Priming/Painting, High Temp. Paint, Powder coating, etc. Provides much better quality results.

The sales Rep must be familiar with Metal Surface Preparation before Finishing such as Priming/Painting, Powder coating. The product has Zero Waste Disposal. Completely solves the Rusting & Long-Term Rust Protection problems, Welding & Adhesion failures. Increases weld strength considerably in steel & Anti-spatter. Eliminates one or more steps from traditional processes, saving a lot of labor, time & cost. Zero Product Cost after use. No EPA or OSHA regulation. Zero Welding & Zero Paint Adhesion failure since 1998. Zero Re-Work. Indefinite Shelf Life.

Our product is being used by major companies, such as OEM, DOT, Military Metal Fab., Aerospace, Automotive Aftermarket, Mining, Boat manufacturers, etc. It has been used by Lockheed Martin, Goodrich Aerospace, Bechtel International, DOT TENN, SpaceX, etc.
 
Company ID: 113435 - Click Here for Full DetailsUpdated
Product Lines:
Concrete Sealer.

Our Flagship Product has been in Use for 20 years Worldwide. Permanent Protection From Salts and Freeze/Thaw Cycles. Incredible Savings Over Repair/Replace Options. A Clear, Environmentally Friendly Water Based Sealer that is Easy to Apply. 5 Gallon Pails or 55 Gallon Drums. 
 
Target Markets:
Departments of Public Works, Departments of Transportation, City and Local Governments, Municipalities, Engineers, Architects, Maintenance Supervisors, Commercial Landlords, Property Management, Plants and Warehouses, Salt Storage Facilities. 
 
Sales Opportunity:
Our unique sealer is a permanent, one-time application to get 20 extra years or more out of concrete. It hardens, densifies, and penetrates deep into the pore structure and will save literally tens or hundreds of thousands of dollars over the life of the concrete in repair and replacement cost. Cities, towns, municipalities that have an annual budget to replace their bad concrete will love our permanent solution.

Use the first year's replacement budget to treat all your sidewalks, public entrances, etc., and then save the next fifteen years' budget to do something else with! If you have contacts in these areas, they will thank you for this money-saving product. We have a solid track record and plenty of testimonials and referrals, as well as plenty of marketing collateral to support sales.

Our team is always available to discuss a client's needs, work out a proposal, and give you all the support you might need. Our interest is in finding reps who are already servicing these areas to introduce our solution to those who will benefit most. Our tiered pricing leaves plenty of room for you to make good money, as our typical contract ranges from $4k to $60K or more. Submit a sales inquiry to us if the product seems like a fit, and let's go!
 
Company ID: 106164 - Click Here for Full DetailsUpdated
Product Lines:
Select from the following American made products: Skid Steer Attachments, Agricultural Equipment, ATV, UTV/SxS, Motorcycle Accessories, Snow Removal Equipment for Tractors, Skid Steers, & Wheel Loaders, Fuel Transportation Trailers, Towable Backhoes, OEM Fabricated Steel Parts & Assemblies. 
 
Target Markets:
Agricultural/Construction Equipment Dealerships/Retailers, Rental Dealerships, OEMs, and Power Sports Dealerships. Markets Span Both Rural and Urban Settings with Products that can Serve a Vast Range of Customers. Depending on the product lines, you can make any market sell-able! 
 
Sales Opportunity:
We are a diverse, fast growing, and high-tech manufacturing company that produces our products from start to finish, located in Southern Minnesota. Being family-owned and operated for nearly 28 years, a reputation has been established for high caliber sales and service teams throughout the industries we serve. Our name has grown on service and quality.

We are looking for independent reps that understand the light construction equipment, agricultural, recreational, turf, rental, and/or contract manufacturing steel industries. Our products are innovative and will give the end user a competitive advantage over the competition. Depending on the product line/s, we have open territories across North America.

Our product lines are higher dollar. Agricultural products are targeted towards large farmers, construction products are geared to contractors and operators of all sizes, powersport accessories are high-volume and quick turns! The opportunity to carry our products is a great one. With diversity among the lines, they can create a full-package sales portfolio. There's something in our product offerings for every end-user.

We pay 6% commission on equipment at the time of payment, assist in product training and offer marketing support. Take on our lines to find success with a motivated attitude and drive for success!
 
Company ID: 116090 - Click Here for Full DetailsNew Profile
Product Lines:
High Performance 100% Biodegradable, Non-Flammable, Food Safe, Non-Toxic, Eco-Safe, Penetrating Lubricant that Unlocks Seized Parts, Fights Corrosion, Lubricates and Protects Metals, Cleans and Degreases, Adhesives, Tar and Asphalt Remover, Long Lasting, and NSF H1 Registered. 
 
Target Markets:
Industrial Market with Focus on Metal Drilling, Saw Mills, Asphalt, Oil & Gas, Aerospace, Schools, Municipalities, Food and Beverage Plants, Marine, Welding, Metal Fabrication, Mold Release, Motor Sports, Transportation. 
 
Sales Opportunity:
You will receive an aggressive sales commission paid timely with a bonus program. While we build a re-distribution channel, we have self-distribution through our own truck fleet. We have less than pallet and drop ship program to support distributors initial customers. You sell it, we will get the product to customer! You will get paid!

We have a national marketing program to build brand awareness. This product performs better than silicone and petroleum distillate alternatives. The green and eco-safe positioning meets the sustainability initiatives of large industrial customers. Join our team. Make money! Have some fun! Performers earn great incentives!
 
Company ID: 115732 - Click Here for Full Details
Product Lines:
Pipe Supports, Pipe Isolating Barriers, Cryogenic Pipe Supports, LNG Pipe Supports, Easy to Install,"Lift-Off" Pipe Supports, Patented. 
 
Target Markets:
Engineers, Construction Contractors, Maintenance Engineers, and Supervisors, Oil and Gas Upstream, Downstream, Chemical plants, Utility companies, offshore, food and beverage, mining, marine, Government, DOD, DOE, LNG. Basically Anywhere where Pipes Need Supporting. Storage Tanks and Tank Farms. 
 
Sales Opportunity:
A brand new and unique Pipe support design. Proven materials and design. Patented. Worldwide market. Supplements existing designs. Easy to install. Huge volume can be sold. Great commissions. Possible share holding. No volume restrictions. Total installed cost beats anyone in the industry.
 
Company ID: 32465 - Click Here for Full Details
Product Lines:
Premium Card that Goes into a Persons' Wallet and Never Leaves their Wallet Sending an Advertisement Every Time the Person Opens his or her Wallet while Protecting all the Information in their Wallet from RFID Scanners. 
 
Target Markets:
Every Business Man/Woman or Company that Wants to Advertise their Product or Slogan, Hotels, Casinos, Marketers, Car Dealerships, Charities, Political Campaigns, etc. 
 
Sales Opportunity:
Premium card that goes into a persons' wallet, and never leaves their wallet, sending an advertisement every time the person opens his or her wallet, while protecting all the information in their wallet from RFID scanners that can steal their info from their credit cards, bank cards, passports in their wallet. On QVC, Sold over $7 Million Worth.
 
Company ID: 115986 - Click Here for Full Details
Product Lines:
We Manufacture Precision Steel Molds for Plastics and Metal Injection Molding Requiring very Tight Tolerances.

This Level of Precision can be Translated to Other Products. We Design, Manufacture, Sample, and Run Molds Before Shipping to our Customers. 
 
Target Markets:
Most of the Molds are Made for the Auto, Appliance, Telecommunications, and Medical Industries. We have Certification to ISO9001. Most of our Metal Injection Molds have been Sold to Metal Injection Molders for Appliance and other MIM Applications. 
 
Sales Opportunity:
Precision machining is a core competency that we have effectively applied to electrical connectors for molds for a number of industries including auto, appliance, telecommunications and medical. We have also been successful in applying this expertise to medical devices, precision end of arm tooling and fixturing. Our services include laser engraving with graphics and steel polishing achieving A-1 & A-2 finishes.

We are looking for representatives with a technical expertise and market knowledge of manufacturing in the areas outlined above. Our expertise in machining can also be applied to the aerospace industry. Our plastics molding plant is currently working to certify to IATF16949 by year end.
 
Company ID: 115724 - Click Here for Full Details
Product Lines:
Plastics Manufacturing Services
Production 3D Printing
Production Additive Manufacturing 
 
Target Markets:
Product Design and Marketing Firms
Toy Manufacturers
Automotive
Automation Integrators 
 
Sales Opportunity:
Ours is one of the highest capacity 3D printing facilities in the work. We produce thousands of plastic parts as an alternative to injection molding. Saving clients the cost of molds, while giving them design flexibility and perfect Just-In-Time manufacturing to reduce the cost of inventory.
 
Company ID: 115954 - Click Here for Full Details
Product Lines:
Boat Dock Cover called the “Boat Garage”.

Not Seen Anywhere in the Country Except on One Lake which has around 1,000 of them on the lake. Other Uses: Car Shelter, Hunting Shelter, Pools, Any Shelter Application. Built to Withstand Coastal Weather Conditions. Different Size Options. 
 
Target Markets:
Lakes, Rivers, Coastal Areas, New Lake Community Developments, Car Collectors, Dealers Both Boat and Car, Contractors, Devlopers, Marinas, Hunters, Pool Contractors, etc. Anywhere a Durable/Portable Shelter can be Utilized. 
 
Sales Opportunity:
Untapped market. Engineered and built in Katy,Texas. Ground floor opportunity with new start-up. Family business, no corporate game playing. We have filed for a utility patent. Completely protects boat from UV damage, all aluminum frame with stainless steel hardware. No other product like it. Direct mail marketing assistance available, brochures, website, local trade shows. Ad running in Boating Magazine. 5% commission on net sales.
 
Company ID: 113847 - Click Here for Full Details
Product Lines:
We are a Leading Safety and Warning Whips Manufacturer.

Our company sells products under the brand names of:
Safety Whips: Powered, Non-Powered, LED Whips
Helios: Beacon Lights permanent and magnetic mounted
Toro: Wheel Chocks-10-400 tons
NVIZN - Cheese heads, VID LED Panels and more 
 
Target Markets:
Our Primary Customers are Mines Around the World and those who support the mines. We have a Number of other Verticals that are Tied to Heavy Equipment. 
 
Sales Opportunity:
Our mission is to be the preferred and most trusted for safety products, exceeding customers expectations, and achieving market leadership. We want to earn our customers loyalty through offering improvement in quality, productivity, customer service, safety and environmental impact. We are looking for individuals with strong connections to the mining industry.

We offer superior products and support to our reps and distributors around the world. As a company our reputation precedes us and you will enjoy the benefits that come with having a stellar reputation. We offer five major lines of products that can be viewed online. Our compensation plan includes a generous payout and accelerators for superior sales performance.
 
Company ID: 115861 - Click Here for Full Details
Product Lines:
We Currently have Over 20,000 Different LED Lighting Products, Interior, and Exterior LED Lighting for Commercial, Industrial, Office, and Government Facilities,

Our company is Not Looking for a Lighting Specialist. We are a Full Turnkey Solutions Company. 
 
Target Markets:
All types of businesses - Hotels, Car Dealerships, Commercial Facilities, Industrial Facilities, Government Facilities, Hospitals, Warehouses, Car/Truck Dealerships, Stores/Retail, Property Management Companies, Transportation, Offices. 
 
Sales Opportunity:
Demand Lighting is not looking for a lighting specialist.We are a full turnkey solutions company.Our average projects are $127,000. We have projects from $1,000 to $3M. What we need in sales is the front 5% helping introducing our company and the opportunity. Then the back 5% with the customer helping to close the opportunity, Austin will do 90% of the work. We do this nationwide with small to large project

We are a disruptor in a multi-billion dollar the lighting industry. We provide full turnkey LED Lighting custom solutions and manage your lighting installation project from start to finish, normally 20% less than the Big Box companies. We have double every year for the past 6 years.

Achievements:
2019 The Woman’s Enterprise Forum Representative, 2019 Women’s Business Council SW Board Member, 2019 Women’s President Organization, 2018 Enterprising Women of the Year, 2018 Goldman Sachs 10,000 Small Business Alumni, 2018 Tuck-WBENC Executive Program Alumni, 2018 SBA Emerging Leaders Program Alumni, 2017 TOP 5% of Women-Owned Companies by Revenue North America, 2017 Largest Women-Owned Business – Austin Business Journal, 2017 Toyota Financial Services Small and Diverse Business Mentorship Program Alumni.
 
Company ID: 8113 - Click Here for Full Details
Product Lines:
Target A - Fiber for Concrete Reinforcement.
Target B - Fiber for Asphalt Reinforcement.
Target C - Cementitious Coatings and Sealers. 
 
Target Markets:
Target A - Ready-Mix and/or Pre-Cast Producers, Architects, Engineers, and Concrete Contractors.
Target B - Contractors, Pavers, Producers, Engineers, DOT's, Township Supervisors, and Large Property Owners.
Target C - Property Developers/Managers, Distributors, Engineers, and Architects. 
 
Sales Opportunity:
FORTA® is a growing company with three divisions, Concrete, Asphalt (FORTA-FI®), and Coatings & Sealers (Arisfor®). This is an exceptional opportunity to work with a growing company that understands the value of providing support to their independent sales representatives. You will benefit from an industry-leading commission program, as well an excellent training program to introduce you to our products and services and continued training as needed. We are known for our top of the line support staff and friendliness. When you work with us, you are part of our family!

Territories Open:
Fiber for concrete reinforcement - MT, OK, N. TX, N. CA.
Fiber for asphalt reinforcement - TN, MS, NC, SC, AL, GA, and FL.
Coatings and Sealers - TN, MS, NC, SC, TX, CA, AZ, N.MX
 
Company ID: 105932 - Click Here for Full Details
Product Lines:
We Manufacture Screen & Digital Printed: Decals, Nameplates,Labels, Overlays, Control Panels, and Caution Warning Labels.

We have capabilities in Heat Bending. We Work in the OEM and POP Markets. All of our Products are Custom to your Customer’s Needs! Build your Line with Repeat Business. 
 
Target Markets:
OEM Manufacturer's Requiring Label, Overlay, Product ID, Functional Marking, Caution Warning
Automotive Industry - Engine Labels
Restaurant Industry - Menu Boards - Counter Signage
POP Industry: Shelf Signage, Seasonal Signage, Shelf Talkers, Floor Graphics 
 
Sales Opportunity:
This is a great opportunity to expand your OEM customer line. We are an excellent company to work with! Our On time delivery is 100% and we have had "0" returns from our customers. We offer very competitive sales commissions. We know and understand what it takes for you to sell our products. We were trained by Reps! We are looking for representatives looking for opportunities to increase business! We can help you build business with our company. We want to grow your existing and newly developed business by expanding profit to your bottom line. We understand what you need. We work with reps to provide a win/win.

In other words, we find companies that buy what we sell and provided you a complete kit with Companies that buy our products, you will also see what they manufacture and provide samples of our products so you are prepared for a visit. With our experience and your professional selling skills everyone succeeds!
 
Company ID: 115628 - Click Here for Full Details
Product Lines:
Our Pod is the Smallest, most Convenient Portable Water Purifier on the Planet, ever.

It Goes Where other Water Purifiers and Filters Can’t Go and is designed to Fit in Any Water Container or Re-Usable Bottle. 
 
Target Markets:
Healthy Grocery Stores
Outdoor Sports Specialty Stores
Health & Fitness Clubs
Travel Industry
School Organizations
Corporate Sustainability 
 
Sales Opportunity:
Huge white space opportunity for resourceful and committed reps with established network. This product has viral characteristics and the sales potential to explode nationally. Our pod's advanced ceramic technology is the first innovation in consumer water filters in over 40 years, when activated charcoal filters were first introduced and has many advantages over these pitcher filters. The nations drinking water is contaminated and the problem is getting worse. Plastic water bottles are a scourge to the planet and people are finally waking up to these facts. This Pod provides a solution for both.
 
Company ID: 9232 - Click Here for Full Details
Product Lines:
New Landing Gear Developed for a High Production Drone is now Available to Both Commercial and Military Aircraft.

Lighter, more Reliable, Less Maintenance, & Less Expensive than Current Landing Gear. We also Supply Hydraulic Dampers, Tail Hook Centering Mechanisms, Tail Skids, etc. 
 
Target Markets:
Military and Commercial Aerospace, Lockheed, Boeing, Northrop Grumman, Piper, Cessna. 
 
Sales Opportunity:
65 year old company is expanding into new markets. Excellent commissions & support. We are known as the top quality "go to" company. We need your help now.
 
Company ID: 110347 - Click Here for Full Details
Product Lines:
Metal, Plastic, Rubber Parts: Custom Made Per Print Parts with Processes such as Machining, Stamping, Fabrication, Molding, and Extrusion. 
 
Target Markets:
OEMs - ie: Automotive, Appliance, Sports, Recreation, plus others. 
 
Sales Opportunity:
We have many advantages for you to be successful with us. We like to share the wealth with experienced smart/hard workers. Our company is a very high integrity company based on competitive commissions, and longevity. We provide warehousing for our customers enabling the lead times to be 1 -3 days. Exceptional QC department, 18 years in business, and our customers come first. We desire/provide a Long Term relationship, fair commissions that do not decrease as sales increase. Please submit a sales inquiry to us.
 
Company ID: 115869 - Click Here for Full Details
Product Lines:
Our RV Roof Primer Promotes Adhesion to the Existing:
TPO, PVC or EPDM Roof Membrane.
Our Premium Roof Coating is a Long-Lasting, Technologically Advanced Roof Coating for Weatherproofing and Restoration of RV Roofs.
Our Roof Sealant is a High-Performance Self-Leveling Sealant that Cures to a Flexible Rubber. 
 
Target Markets:
RV Dealers, RV Repair Shops, and Mobile Repair Companies. 
 
Sales Opportunity:
You will have over 2,000 potential customers that repair leaking RV roofs every day and need a product that can work for them and their customers. We are a manufacturer with over 60 years of commercial experience and millions of sq ft applied standing behind the product.

Our Premium Roof Coating System is an odorless, chemically-cured, fully-reinforced roofing and waterproofing system distinguished by its proven use in commercial applications. It is a long-lasting, highly-efficient weatherproofing restoration system that is installed for a fraction of the cost of total roof replacement.

The premium roof coating is specially designed for coating for RVs, trucks, and utility trailer roofs. Its two-part formula results in faster cure times —and significantly greater performance— than similar one-component products. This roof sealant is a high-performance, low modulus, one-component, self-leveling sealant.

It cures to a flexible rubber watertight seal. An excellent secondary sealant to help protect around roof penetrations such as skylights, vents, stacks, and seams and to eliminate potential water infiltration into the system or the RV. Our roof sealant is specially designed for sealing level or slightly sloped joints and seams on RVs, truck and utility trailer roofs and floor assemblies.
 
Company ID: 115730 - Click Here for Full Details
Product Lines:
We are a Full Service Contract Manufacturer of Customer Designed Components.

Capabilities include: Cutting and forming, Fabrication/Welding, Machining, and Painting, including Powder Coating. 
 
Target Markets:
Typically Customers are OEMs in the Mining/Construction Equipment, Oil and Gas, and Energy Markets. We can Produce High Quality Piece Parts and Fabricated Assemblies including Large, Welded and Machined Assemblies. We have Capacity to Run Both Low Volume Prototypes and High Volume Production Runs. 
 
Sales Opportunity:
We have capacity available to provide quick turnaround of short dated projects. We have over 50 years of manufacturing experience and have the technical know how to collaborate with customers to develop and improve their product designs in order to reduce and control cost of manufacturing. We would support our reps by providing quick response to customer inquiries offering our services at a highly marketable, affordable rate. Commission structure is negotiated on a case by case basis.
 
Company ID: 114368 - Click Here for Full Details
Product Lines:
Industrial, Agricultural, and Commercial Lubricants,Cleaners, and Specialty Products such as:

Engine Oils, Transmission Fluids and Gear Lubricants, Greases, Hydraulic Oils & Fluids, Fuel Stabilizers, Liquid Cleaners, Solvents & Degreasers, Powdered Cleaners, and Specialty Products. 
 
Target Markets:
Aggregate Operations, Agricultural, Concrete & Asphalt, Construction & Excavating, Ethanol, Government & School Systems, Industrial & Manufacturing, Landscape & Golf Courses, Logging & Timber, Marine, Mining, Oil & Gas, Power & Water, Recycling & Waste, Steel Mills, Transportation & Trucking. 
 
Sales Opportunity:
As a sales representative, have you ever:
* Built customers accounts that were taken away from you by the company?
* Lost commissions because management attached new and stupid demands to what was originally agreed to?
* Lost opportunities and accounts based on restrictive geographic boundaries?
* Had corporate overhead and salaried sales managers benefit from your production?
* Recruited people to the company and received little to no money for the effort?

Say no more! Come build equity in a business that will reward you today and for years to come.

What We Can Offer You:
* Unlimited Growth Potential, with No Cap on Earnings
* No restrictions on the area/region you can work
* Account Protection
* Monthly/Annual Incentive Bonuses
* No Inventory, Delivery or Collection Requirements
* A Premium Line to Represent
 
Company ID: 115584 - Click Here for Full Details
Product Lines:
Contract Manufacturer of Wire harnesses and Custom Cable Assemblies, Over Molding, Patch Cables, Ethernet, Fiber Optics, USB, Power Cords. Wire Harnesses, M12 Cables, etc. 
 
Target Markets:
Largely Electronic OEMs but we also do very well in Industrials, Automotive, Marine, and some Aerospace. 
 
Sales Opportunity:
We are looking for energetic salespeople to help us grow in new regions! We have a devoted inside sales staff to help our outside reps with everything from design and quoting, to closing the deal and processing orders. Our ideal sales reps would be bringing new customer opportunities, drawings to quote, etc. We pay commission based upon monthly invoices.

You will be given an inside sales contact here and that individual will assist with all new opportunities that you bring to the table including the engineering work if needed, logistics, quoting, etc. so that you are freed up to find the next opportunity. We Build in the Puget Sound Area. We have a full 6 person quality department, engineering staff, and roughly 65 employees overall.
 
Company ID: 115100 - Click Here for Full Details
Product Lines:
Cable Assemblies, Injection Over-Molded Assemblies, Junction Boxes, Wiring Harnesses. 
 
Target Markets:
Oil and Gas, Agriculture, Industrial Automation, Renewable Energy. 
 
Sales Opportunity:
Our company is an innovative connectivity and manufacturing solutions provider. We enable the connected world, through our advanced design & manufacturing capabilities and tailored supply chain solutions. Leveraging sophisticated technologies and methodologies to become an extension of our customers' product is our strength. To better serve our customer/partners, we inject rapid problem-solving and waste elimination into every aspect of our business. Customer service is at the core of our business and we truly value our customers success.

Flux is headquartered in Alberta and operates out of Calgary, and through its channel partners in Ontario, Indiana, and China. We are committed to an aggressive growth plan that includes manufacturing within the United States in an effort to provide American made products.

We are actively seeking Independent Sales Representatives as well as Referral Representatives that are experts in their customers businesses and are able to leverage existing networks in order to extend our reach throughout the United States. We are committed to the overall success of all stakeholders and will work closely with our representatives and channel partners to establish the program that is right for them.
 
Company ID: 115279 - Click Here for Full Details
Product Lines:
We Offer a Full Line of Standard and Industry Exclusive Agricultural Trailers.

From such Standard Lines such as Stock Trailers and Flatbeds to Swather Carriers and Expandable Flatbeds. We Offer a Variety of Finished Trailers including Grain, Construction, and Contractors Trailers. 
 
Target Markets:
Our Primary Target is any Dealer in the Gooseneck Trailer Market with a GVWR under 30,000 lbs. We are especially focusing on the Upper Midwest markets. 
 
Sales Opportunity:
This company has been building trailers for over 55 years. It has a highly respected reputation in our industry. Several product lines are exclusive to the industry and has no competition. We are primarily focused on the Eastern half of the USA, but all inquiries are welcomed. Commissions based upon actual units sold to dealers, percentages are negotiable.
 
Company ID: 111027 - Click Here for Full Details
Product Lines:
Snow Lion is the Leading Company in the Science of Ice and Snow Removal Technology.

Our Equipment Attaches to Existing Equipment Currently Used for Snow Plowing such as Front-End Loaders and Road Graders. The Mechanical Models Simply Attached to the Loader or Grader Using an Adapter Plate. 
 
Target Markets:
General and Exclusive Dealers in their Territory, The State Departments of Transportation and those who are Responsible for Ice and Snow Removal, County and Municipal Government Agencies, Independent Snow and Ice Removal and Road Maintenance Companies, Airports, Ski Resorts. 
 
Sales Opportunity:
This is a commission only position and commission rates range from 3%-16% dependent on sales volume and whether sales are to dealers of direct to end users. We will provide product and sales training at our US headquarters so that representatives can get “hands on” training on our 14 different models of ice and snow removal equipment.

Position responsibilities include, but are not limited to:
Identifying prospective end-users, following up with the customer on the product benefits to their business, negotiating the sale and obtaining orders from customers.
Identifying prospective General and Exclusive Dealers in their territory, getting the dealers to sign our Dealer Agreement and, for Exclusive Dealers, getting an order for their first piece of demonstration equipment. Occasional travel outside of the territory, such as for attendance at a trade show, at company expense.

If you are interested, please submit a sales inquiry to us and we will email you a confirmation regarding a telephone or on-line interview.
 
Company ID: 65867 - Click Here for Full Details
Product Lines:
Non-Woven Materials including Spunbond, Needlepunch, Spunlace,Thermobond, Chemical Bonded Fabrics, Air Laid and Melt Blown. 
 
Target Markets:
Our reps will be selling products in the following manufacturing industries: automotive, filtration, geotextiles, furniture, bedding, roofing, and rubber molding. 
 
Sales Opportunity:
Ours is an IATF Certified company that specializes in converting and distributing Non-Woven material. We are capable of all slitting/re-winding and can also perforate most of our products in line.

Our company is looking for motivated sales agents that are looking to join an established yet growing organization. The ideal candidate may be representing other product lines to our target markets and have a good working relationship with their current customer base. Representatives should have the ability to take on a new line and devote the proper time to develop it’s potential.This is a commission based position.

Candidates can be located anywhere in the US, preferably in the Northeast or Midwest. We are also looking for reps in Ontario, Quebec, Alberta, and Manitoba.
 
Company ID: 115235 - Click Here for Full Details
Product Lines:
We Sell a Washable, Reusable, 100% Neoprene Overshoe with a Anti-Slip Grip Sole, Sold as Small, Medium, Large, and XL. 
 
Target Markets:
Primary Buyer: Domestic/Residential Contractors.
Primary Distribution Channels: Whole Sale Distribution in the Electrical, Plumbing, HVAC, and Telecom Industry. Ideally, Multi-Branch Locations.
Goal: Comcast Residential Technicians. 
 
Sales Opportunity:
Opportunity: Sell a quality product to residential contractors and their category distributors.

Reason to Work With Us: We stand behind our product, assist our sales rep with Marketing materials, samples, training, etc.

Competitive Advantage: Our product is a washable, reusable, 100% neoprene overshoe with an anti-slip grip sole. We have tested our product with residential contractors that perform 5-8 service calls a day. In and out of customers homes. They're experiencing a minimum life span of 3-6 months per pair.

After conducting comparative cost analysis with paper/plastic disposables, we have found that we have a significantly lower cost over a 3 month period. As well, our product Holds water. Meaning, in inclement weather states, the snow will not seep through onto customers floors. Also, our product is form fitting, black (more aesthetically pleasing then paper booties), and allows contractors to maintain wearing their work boots (OSHA requirement) in a customers' home. It's not a complicated product. Low consumer education required.
 
Company ID: 115265 - Click Here for Full Details
Product Lines:
Automotive Products, Focus on Motor Oil. 
 
Target Markets:
Auto Repairs, Dealers, Gas Stations, Auto Centers. 
 
Sales Opportunity:
Automotive Products Distributor (focused on motor oil) seeks representatives for the Miami-Dade, Palm Beach, Martin, St Lucie, Okeechobee regions. Main functions: Door-to-door service in Auto Repair, Dealers, Gas Stations, Auto Center. And B2B service at major retailers. We are exclusive distributors of well-known brands in the world market. Our products have quality approved by the competent certification bodies, and highly competitive pieces. And our representatives have exclusivity in their areas of operation.
 
Company ID: 115093 - Click Here for Full Details
Product Lines:
Auto Radiators, Forklift Radiators, Construction Machinery (Excavators) Radiators, Agricultural Machinery (Tractor, Harvester) Radiators, Truck Radiators. Aftermarket Radiators. 
 
Target Markets:
North/South America Radiator Retailers, Wholesalers, Distributors. 
 
Sales Opportunity:
We are professional radiator manufacturer, IATF16949 Certification. We have all text machines, one year limited warranty. Forklift, construciton, agricultural machinery radiators is our most familiy field. we do truck radiators very well also.Radiator for Toyota, Nissan, TCM, Komatsu, Mitsubishi forklift trucks. Radiators for Kubota, Yanmar, CAT, KOMATSU, Hitachi, Kobelco, John Deer excavators. Radiators for Harlan tractors, radiators for big air compressors, and more.
 
Company ID: 115231 - Click Here for Full Details
Product Lines:
We Currently have Capacity Available on 2-1", 6 Spindle Screw Machines.

Both Machines are Equipped with Sub-Spindles so Back Work can be Performed. Capacity Available on our Vertical CNC Mill. (X:24,Y:14,Z: 6). Spot and Projection Welding along with Secondary Operation Equipment are Available. 
 
Target Markets:
Manufacturers
Equipment Manufacturers
Screw Machine Part Suppliers
Part Supply Companies
OEMs 
 
Sales Opportunity:
We have supplied high volume automotive precision screw machine parts as a Tier 3 supplier for approximately 10 years. We are ISO 9001:2008 Certified, and are currently transitioning to ISO9001:2015. We appreciate the importance of quality parts being delivered on time.
 
Company ID: 115177 - Click Here for Full Details
Product Lines:
Industrial Lubricants for Heavy Machinery:
- Engine Oil
- Grease
- Hydraulic Fluid
- Transmission Fluid
- Gear Lube
- Fuel Conditioners
- Industrial Cleaners 
 
Target Markets:
- Agriculture
- Trucking
- Mining
- Construction
- Manufacturing
- Municipalities
- Any company with heavy equipment 
 
Sales Opportunity:
- Be your own boss and set your own schedule
- No commission cap
- Sell a product that you can stand behind
- Sell a product that is consumable
- Same commission structure from the first to last sale, from smallest to largest accounts.
-Excellent and on going training

We provide world class durability and put money back into our customers pocket by reducing downtime and increasing fuel economy. Our product is second to none in the industry. We have extensive research and customer testimonials to back that up.
 
Company ID: 108293 - Click Here for Full Details
Product Lines:
Custom Manufacturer of Industrial Curtains including Plastic Strip Doors, Curtain Walls, Airport Baggage Handling Conveyor Curtains, Clean Room Curtains, Laser Barriers, and Data Center Hot Aisle/Cold Aisle Containment Systems. 
 
Target Markets:
We provide Industrial Curtains to a range of Industries including Aerospace, Airport, Automotive, Biotech, Clean Room, Cold Storage, Data Centers, Electronics, Medical Device, Pharmaceutical, & others. Sales are Made to End-Users, Contractors, OEMs, and Resellers such as Material Handling Companies. 
 
Sales Opportunity:
Our company takes pride in fabricating custom products to fit the specific needs of each and every application presented to us. The product is delivered in a timely fashion at a reasonable price. Using UPS as our standard carrier, all orders are received no more than five days after they are shipped, at a low negotiated price.

In business since 1978, we use materials of the highest quality and can provide test data in regards to anti static properties and flame spread capabilities for all of our flexible vinyl materials. Our company supports its representatives by maintaining an up to date web and social media presence which along with our participation in trade shows provides qualified leads. Our commission structure of 10% to 25%, based upon product and customer type, affords manufacturer reps a great earning the opportunity.
 
Company ID: 115107 - Click Here for Full Details
Product Lines:
Unique Line of Graffiti Removers and Degreasers. Very Effective and Biodegradable. 
 
Target Markets:
Municipalities, DOTs, Commercial, and Petrochemical Markets 
 
Sales Opportunity:
Our products are the most effective in the marketplace, developed by a chemist in the 1970's and sold locally for more than 45 years however the prior generation never expanded. Now under new management we would like expand our horizons and share our products in new geographies. Very high commissions paid, very high commissions paid!
 
Company ID: 114937 - Click Here for Full Details
Product Lines:
Custom Designed Machines/Equipment such as: Robotics, Semi and Full Automation, Manual Assembly, & Vision Inspection Solutions, etc.for the Manufacturing of Goods.
Machining (Plastics and Metals), Fabrication, and Assembly
Gauge & Fixture Design and Build 
 
Target Markets:
Consumer Manufacturing Businesses: Engineers, Purchasing Procurement, Project Managers, Technicians.
Various Industries: Tech, Consumer Products, Defense, Plastics, Automotive, Electronics, etc. 
 
Sales Opportunity:
We are looking for a sales rep to help us grow our business. We are a automation company located in the heart of the automotive and technology manufacturing center of Ontario. The ideal rep would procure new clients through phone, email, and face to face meetings, with the intent being any new clients submitting RFP/RFQ's for new equipment/machinery or other services offered.

The individual should have a strong background in manufacturing and an understanding of assembly equipment/machinery. They will also be able to pitch various technologies and concepts to potential clients. Contract based on a hourly rate, with commission incentives.
 
Company ID: 114228 - Click Here for Full Details
Product Lines:
Self-Lubricating Plain Bearings, Metal Polymer Bearings, Metallic Bearing Materials. 
 
Target Markets:
Industrial Equipment Manufacturers (OEMs), Aircraft, Aerospace, Medical, Heavy Industry, Process Industry Equipment, Automotive, Heavy Equipment, and Recreation. 
 
Sales Opportunity:
Daido Metal USA is actively looking for representation for our metal polymer bearing product line in numerous regions throughout the United States. Immediate requirement for representation in Southern California, Midwest US, Southeast US and Northeast US. North America sales supported by company direct sales representation/management, distribution center in Ohio and application engineering from our North America headquarters in Michigan.

Technical sales experience to OEMs required. Engineering level sales experience preferred. Our company is a global plain bearing manufacturer with an inherent focus on product quality and performance. We believe strongly in giving our reps the tools to be successful. Product training, in-field sales support, inside sales support, company web presence, trade shows, marketing/advertising, product literature and samples are all provided.
 
Company ID: 107971 - Click Here for Full Details
Product Lines:
Industrial Gloves, Tape, Safety Wear (Glasses, Helmets, Ear Plugs, etc.), Industrial Cleaning Supplies, Industrial Rubber Bands, Industrial Tapes. 
 
Target Markets:
Manufacturing Production Plants, Distribution Center Warehouses, Truck Cleaning, Remediation Clean-Up, Poultry Plants, Tire Plants, Oil/Gas Companies, Cleaning Blacktop Machinery, Garbage Truck Cleaning, Oil Change Centers, Gas Stations. 
 
Sales Opportunity:
Looking for seasoned rep organization that can get the job done. Selling industrial products which are exclusive to our organization. Unique selling opportunity to be first to market and a strategic pricing advantage with our business model. Must be currently selling to Manufacturing facilities on a Direct basis.

Experience selling gloves, tape, safety equipment, industrial cleaning products, industrial rubber bands and other industrial related products. Ability to get to the right person for our products. Aggressive and seasoned agency. 5% commission rate.
 
Company ID: 114909 - Click Here for Full Details
Product Lines:
Prototype Aluminum, Magnesium, and ZN Castings.
CNC Machined Castings.
CNC Billet Parts - Specializing in Aluminum, Magnesium, and ZN. 
 
Target Markets:
OEMs with Product Development Based in the U,. Defense Companies Needing Legacy Parts that are No Longer Manufactured or Supported, Any Business Needing Machined Parts. 
 
Sales Opportunity:
We specialize in rapid prototyping and low-volume production aluminum, magnesium, and ZN castings. We have a typical turnaround time of 1-2 for the first castings and 2-3 weeks for the first machined casting. Billet turnaround is 3-10 days for first parts.
 
Company ID: 114804 - Click Here for Full Details
Product Lines:
High Precision Japanese Machining for All Types of Parts for Industrial and High Performance Applications. Specializing in High Precision Camshafts. 
 
Target Markets:
Customers with Extremely Tight Tolerance and High Quality Machining Requirements. 
 
Sales Opportunity:
Top of the line products along with an extremely motivated back office support will ensure that your efforts in the field are well rewarded. In addition, we offer an impeccable commission system. Our company is focused on team work to help service the customer in the best possible way. We believe that if our reps are successful, we are successful! We are looking for a win-win partnership.
 
Company ID: 114761 - Click Here for Full Details
Product Lines:
Our Company is a Custom Plastic Extruder.

We are Seeking a Rep to Sell Custom Extrusions and our Basement Window PVC Product for New Home Construction. 
 
Target Markets:
Basement Windows will go Through Distribution or Direct to the Builder. Custom Plastic Extrusions can go to Buyers in the following markets: Office Furniture, Case Goods, Window & Door, Point of Purchase, Refrigeration, Edge Band for Furniture Applications, Industrial Applications, etc. 
 
Sales Opportunity:
Our is a custom extrude company for 30 years. We can extrude almost any profile or material. We have also developed a basement window product that we would like to sell directly to the home builder or supply/distribution companies. We are a great company to work for and support our Sales Reps. We do not discount % of commission as your portfolio grows but rather motivate you to sell as much and earn big dollars doing so. We are also supportive in finding leads. We have 18 years of database building in our ERP system waiting for an energetic rep to pursue.
 
Company ID: 100798 - Click Here for Full Details
Product Lines:
Auto and Motor Care:
Cars: Wipes, Wheel/Tire Cleaners, Waxing Wipes, Very High Quality Waxes, Leather Cleaners, Tire Cleaners.
For Motorcycles - Wipes, Cleaners, Wheel and Tire Cleaner, Chain Lube and Cleaner, Leather Car, Aluminum Care, Insect Remover, Visor Wipes (Brilliant Idea). 
 
Target Markets:
Parts Stores, Dollar Stores, Supermarkets, All Retail Chains, Service Shops, Retail Chains, Body Shops, Boat Repair, Marine Outlets, Distributors and more… 
 
Sales Opportunity:
Autoland Car Care is a brand new company in the USA. We are the new importers for these products that have done so well in Europe. The products are not made in China, they are made in Poland and sold through distribution, retail, gas stations, and even at the high-end car dealerships around Europe.

We have new branding done for the US, looks very nice - elegant even. Stands are ready also so can be on shelf or on a stand that we can supply.

We are bringing these products to the USA and Canada and seek reps to do that. Pricing is extremely competitive for the quality of the products and so are rep margins and commissions. We have packaging updated for the US and the products are ready for sale. We have an order fulfillment warehouse in Michigan and we are stocked and ready to go. Contact points to the MI HQ are listed online.
 
Company ID: 109592 - Click Here for Full Details
Product Lines:
Disposable Personal Protective Equipment (PPE). Disposable Gloves, Aprons, Gowns, Sleeves, Coveralls, and other products for Personal Safety and QA in Processing, Manufacturing, Maintenance, and Medical Industries. 
 
Target Markets:
Food Processors, Automotive, QSRs, Janitorial, Waste, Pest Control, Construction, Medical, Hospitality, Chemical Manufacturers, Food Services, and other Related Industries. 
 
Sales Opportunity:
We are a very different kind of company. We are seeking qualified and experienced independent sales representation for our Personal Protective Equipment (PPE) product lines in several major regions (SE, SW, MW, Mid-Atlantic areas). We are a young and creative fast growing vertically integrated direct import distributor of disposable PPEwith a unique and disruptive distribution model. Pricing and innovative product solutions assure sell ability and a competitive advantage like no other. The result is Huge savings for a company's PPE budgets with improved PPE quality standards.

This is a significant opportunity for the skillful representative to earn durable, long-lasting commissions on high volume major accounts. We welcome your application to participate with us in our high growth sales opportunity. Sales experience within any of the following industries is helpful: Food Processing, Automotive, QSR’s, Janitorial, Waste Management, Pest Control, Hospitality, Food Services, and other related industries.

Ideal candidates will have at least three years of sales experience in any of the listed industries, and have earned the minimum of a four-year undergraduate college degree (BS or BA). If prosperity is your guide and you would like to join a team that thinks differently about ordinary things then please submit a sales inquiry to us.
 
Company ID: 113234 - Click Here for Full Details
Product Lines:
Thermal Mass Flow Meters and Controllers 
 
Target Markets:
Oil and Gas, Chemical/Petrochemical Processing, Analytical, Food & Beverage, Pharma, Automotive/General Manufacturing, Subsea, Industrial Vehicle, Marine, Fluid Power, Bio Tech, Life Sciences, Research Labs, Universities, Energy, Surface Treatment/Coatings. 
 
Sales Opportunity:
Our company AW-Lake ("Vogtlin" brand Thermal Mass Flow Instruments) is seeking additional established Representatives throughout the Americas. We offer territorial exclusivity and generous compensation. We are seeking representation for parts of the Midwest, South, New England, Canada, Mexico, Central and South America.
 
Company ID: 114584 - Click Here for Full Details
Product Lines:
Industrial Strength Cleaning Products that are Safe for Business and Consumers.

Our Products are Sold Under Two Different Brands. All Types of Cleaning Needs: Degreasing, Deodorizing, Disinfecting, General Cleaning, Automotive, Floor/Carpet Cleaners. We also have Wastewater Treatment Products. 
 
Target Markets:
Municipalities of all kinds: Jails, Cities/Towns, Water Treatment Plants, Housing Authorities, Schools, Businesses, Big Box Retailers, Restaurants, Consumers, Cleaning Companies, Hospitals, and others. 
 
Sales Opportunity:
Our sales reps typically make $100K plus annually. Our products are of the highest quality and we pride ourselves on our customer service and quality. We provide marketing material and samples for you to demonstrate. We also have some stablished territories that need additional sales reps to assist with our demand.
 
Company ID: 112973 - Click Here for Full Details
Product Lines:
Products and Services we Provide are:
Diesel + Gas Electronic Control Modules (ECMS\ECUS)
Diesel + Gas Electronic Diagnostic Tool Kits, Diesel Engine Software, Diesel Tuning Services via the Internet, Custom Diesel Engine Files for Cars, Trucks, ATVs, Boats, RVs, On and Off Highway Equipment. 
 
Target Markets:
OEM Truck Dealers, Independent Truck Repair Shops, Construction, Forestry, Agriculture Equipment Repair Shops, Truck Fleets, Truck or Equipment Owner Operators. 
 
Sales Opportunity:
Looking for motivated Rep(s) to call on repair facilities. Experienced rep in truck parts or engine service industry. Chosen Rep(s) will be given exclusive areas in the United States & Canada. We have 450 authorized independent truck repair dealers that need to be called on with updating of the products and services we provide.

Your position will require you to call on our current dealers and fleets and create future prospects. Our products and especially our tuning services are mainly exclusive making us number one in the world. Commission is 10%. Average sale $4,000 on tuning service or software.
 
Company ID: 110125 - Click Here for Full Details
Product Lines:
Precision Machining Services, General Machining Services, CNC Lathe, Milling Department. Metal Forms, Wire Forms, Springs, CMM Inspection and Reporting, Heat Treating, Material Certs, Surface Finishing, Plating, Anodizing, and Assembly. Specializing in Tight Tolerance, Exotic Featured Parts. 
 
Target Markets:
Aerospace/Defense, Medical Device Manufacturers, Automotive, Industrial Automation Machinery, Optical Device, and Telecom-Electronics Manufacturers. 
 
Sales Opportunity:
Since 1981, SMI CA has been producing precision components in a wide range of materials including Alloy steels, Stainless Steels, Aluminum, as well as exotic material such as Titanium,Inconel using the latest in CNC Machining and manufacturing technologies. Our company is Certified with AS9100C & ISO9001 International Quality Standard. Applications range from aerospace, defense, medical, automotive, optical device, industrial products, and telecom/electronics.

We are part of an international group (STM) focused on a development of world class manufacturing technologies. STM Group includes Toho Seiko, a world renowned precision spring manufacturer located in Japan. Founded in 1957 in Japan as a specialized manufacturer of springs, received high praise from the industries such as medical device, optical equipment, telecommunications equipment, industrial equipment, automotive, consumer electronics, electronic components, etc. because of its technology and quality. We are the hub of customer service, engineering, and production for the US customers.

Currently, we are looking for the rep in the west coast and the east coast. Great opportunity to be the first rep. to market our services. Our pricing is very competitive and our engineer and production team will make sure the project success. We are looking for the long term partnership with the reps and will pay commission as long as the project last. Please explain why you are interested in representing our company.
 
Company ID: 113914 - Click Here for Full Details
Product Lines:
Precision Ceramic Machining services for over 30 years. Current customers include GE Energy, Lockheed Martin, Raytheon, Agilent & Ball Aerospace.

Our Quality & Manufacturing Systems are Compliant to AS-9003A. 
 
Target Markets:
Aerospace, Medical, Electronic, Energy, Analytical Device Manufacturers, and OEMs. 
 
Sales Opportunity:
Looking for long term relationship with a sales rep that has experience with customers who use contract manufacturing services. Territory is the US, Canada and Mexico. Background in advanced materials helpful. We do not compete with machine shops that machine metals and plastics. We could be a compliment to these types of lines. Most of our success comes from relationships with engineers, providing them with lots of advanced materials know how and knowledge and service. We are a family owned and operated company with lots of loyalty when working with our customers and employees.
 
Company ID: 113837 - Click Here for Full Details
Product Lines:
Precision Tooling. Plastic Injection Components, Progressive Stamping, Punches, CNC Turning, Milling, EDM Centerless Grinding, ID/OD Grinding, Hard Turning, and Hard Milling. 
 
Target Markets:
Stamping Houses, Plastic Injection Mold Builders Air Conditioning Tooling, Fin Tooling, Chain Manufacturers, Transmission, and Gear Box Manufacturers. 
 
Sales Opportunity:
Commission Structure is up to Rep. He can bump whatever he feels is necessary.. Non Union shop, We work to very tight tolerances. Familiar with most tool steels. We are a small shop in NY state and are looking to expand our business.
 
Company ID: 113602 - Click Here for Full Details
Product Lines:
Cow Matts- Rebond Slabs Used in the Stalls of Dairy Cows.

Rebond Sheets and Blocks are Used to Make Parts for Automotive Seating and Interior Parts. 
 
Target Markets:
Dairy Farmers/Producers, Automotive Manufacturers, and Tier 1 Suppliers to the Automotive Industry. 
 
Sales Opportunity:
We are a producer of rebond foam products, located in Dalton, Georgia with our parent company a producer of polyurethane foam and foam systems. We are looking to expand our cow matt and automotive programs. Looking for someone with experience selling into the Dairy Industry and the Automotive Industry. All of North America available to the right candidate.
 
Company ID: 113014 - Click Here for Full Details
Product Lines:
Industrial Paints and Coatings. 
 
Target Markets:
Steel Fabricators and Manufacturers of: Steel Gratings, Intermodal Chassis, Truck Trailers, Rail Cars, Steel Springs, Steel Tubes, Conduit, Pre-Cast Concrete, Steel Tanks, Conveyor Belts, Equipment. 
 
Sales Opportunity:
Pruett-Schaffer, in business since 1930, is searching for an independent sales representative to sell industrial coatings in the territory of their choice. Professional Brochures and product catalogs provided by Pruett. Sales assistance and support readily available, including visits to prospective customer sites. Quick response with price quotes. We willingly improvise with product customization to fulfil needs of prospect. US Market for Industrial Coatings already significant is expected to rise.
 
Company ID: 107173 - Click Here for Full Details
Product Lines:
Cold and Hot Aluminum Forgings as well as High Volume Precision Machining Capabilities of All Alloys including: Steel, Cast Iron, and Aluminum Die Castings. 
 
Target Markets:
Ordinance/Military Selling to Machine Houses, Automotive Selling to OEMs, Commercial Selling to OEMs. 
 
Sales Opportunity:
Michigan manufacturer has a great opportunity for seasoned individuals who have contacts in all the right organizations. We are a very competitive manufacturing organization that utilizes technology and know how to be the best in class supplier.

We have a current customer base of both Automotive and Non-Automotive organizations and are looking to expand our reach through individuals with established contacts and opportunities. If you are an experienced sales professional looking for a great opportunity to prosper, please contact us for more information and to allow us to discuss a potential fit.
 
Company ID: 111833 - Click Here for Full Details
Product Lines:
Our Company is a Branded Manufacturer of Over 8,500 Seasonal Items.

We Specialize in Everything Christmas (Q4) Holiday, Seasonal Décor, Pool & Spa, Patio & Garden. We have Exclusive & Licensed Lines by Ford, Pepsi, & Tootsie. 
 
Target Markets:
Our Core Demographic includes Gift Shops, Hospital Gift Shops, Independent Seasonal Stores, Decorators, Promotion Companies, Internet Retailers, Wineries, Banquet Facilities, Country Clubs, Casinos Restaurants, Bars, Hotels, Designers, Automotive Industry, and more! 
 
Sales Opportunity:
We are looking for independent representatives in various areas of the country for "territory rep" positions. We are also looking for "key account" reps as well. We have showrooms in Atlanta & Las Vegas at the markets. Ideal candidates attend the show(s) and bring accounts to our showroom. We have a 17,000 sq. ft. showroom at our corporate office in Buffalo, NY. Come work with a great company. We offer very competitive commissions.
 
Company ID: 112592 - Click Here for Full Details
Product Lines:
Oldfloor is an Internationally Renowned Brand Company that has Consolidated its Prestige by its Undisputed Quality of Production of Hardwood Floors.

The Floorboard is Distinguished by its Unique 3 Layer System. The Hardwood is a Solid Plank Available in a Wide Range of Woods. 
 
Target Markets:
Distributors, Contractors, Designers, Architects, Residential Homes/Villas, Direct Sales to Commercial and Cooperate Offices. 
 
Sales Opportunity:
Our beautiful and authentic flooring is hand crafted in the heart of Italy, and its natural wood character and gorgeous finishes are sure to make the impression of a lifetime in any space! All color finishes, whether oiled or varnished, are designed to bring out the best characteristics of the wood which are obtained through multiple processes.

The choices of floorboards gives you from the most natural state of the wood to free of knots and uniform in color. The six types of hand crafting are, Pre-Sanded, Brushed, Borgogna Smoothed, Worn Effect Planing, Hewed Planing and Sawn. Also, Oldfloor is an exclusive manufacturer in the world that has the rights to retrieve the wood piers from the Venice Lagoon to create the most original floors.
 
Company ID: 93595 - Click Here for Full Details
Product Lines:
Low to High Volume, ISO Certified Supplier of Precision Machined Components.

Processing Specialties including: CNC Swiss Turning, CNC Turning, CNC Milling, and Precision Grinding. Size Ranges up to 2.500" dia and 15" long for Turning and up to 48" x 18" x 20" Milling Capacity. 
 
Target Markets:
Firearms Industry, Medical Industry, Outdoor Related (Bicycles, Exercise, Archery, Marine), Automotive Industries, Hydraulic Pump Industry to name a few. 
 
Sales Opportunity:
Established company (1966) with vast experience in many different facets of precision manufacturing. Have experienced much growth the last 5 years and foresee much more growth with the right sales opportunities. We specialize in solving problems for customers!
 
Company ID: 107272 - Click Here for Full Details
Product Lines:
High Temp Fabric, Insulation, Cut/Sew Removable Covers, Silica, Fiberglass Fabric, Tape,Rope, Sleeving, Mats, Packing, Silicone Coated Fabric fire sleeve,Tacky Cloth, Basalt Fabric, Tape, Sleeving, Molten Metal Filter, PTFE Impregnated Tape, Tacky Gasket, Curtain, Removable Cover, Electric Blankets. 
 
Target Markets:
Industrial Distributors, Welding Supply, Fabricators, Contractors, OEM Equipment Manufacturers, Chemical and Petrochemical Plants, Power Plants, most any Industrial Facility with Thermal Management Requirements. 
 
Sales Opportunity:
Our company is a high temperature insulation manufacturer seeking manufacturing sales representatives in multiple states in the USA. International locations possible.

Candidate must be strong in relationships with Industrial Distribution companies and hands-on in approach to train industrial distributor sales personnel in the high temperature textile line of ours. A proven track record with industrial product lines or competitive products. This is a hands-on position working with customers and applications most anywhere hot industrial processes operate. Steel, power generation, petrochemical, oil and gas, aluminum, automotive, marine, pulp and paper, contracting are a few of the areas that generate results.

The following states are possible:
Alabama, Alaska, Arkansas, California, Florida, Georgia, Hawaii, Illinois, Indiana, Iowa, Kentucky, Louisiana, Minnesota, Mississippi, Missouri, North Carolina, Oklahoma, Oregon, South Carolina, Tennesee, Texas, Virginia, Washington, Wisconsin.

Commission and sales bonuses available as well as instant compensation from accounts in select territories. Sales representative has opportunity to work with manufacturer on select product lines from textile raw materials to textile fabrics and blankets, to fabricated cut and sewn textile solutions. Please submit a sales inquriy to us.
 
Company ID: 110031 - Click Here for Full Details
Product Lines:
Write a Deal Today and Get Paid Tonight!

Mobile Marketing is the New Marketing of the New Millennium. Americans Look at their Phones 150 Times a Day, 97% Text, and only 2% of Businesses in the US are Currently Using Mobile Marketing. We Need B2B Agents & Managers! 
 
Target Markets:
Every Business, Non-Profit, Religious Organizations, and Educational Institutions in the US that will Benefit from Text Marketing. This is a Wide Open Market. 
 
Sales Opportunity:
Extremely Realistic First Year Earnings of $50,000 to $125,000 or more. You can earn commissions of $748 per sale. We Pay Daily! Plus, you can earn hundreds per month, every month on the same merchant with Lifetime Vested Residuals! Agents can easily sell 10+ deals a month. We provide all training, sales material, support, & management to be successful. Management opportunities are also available.
 
Company ID: 112596 - Click Here for Full Details
Product Lines:
Injection Molding of Thermoplastics, 50-400 ton Presses
Mold Making and Design, Complex, Hot Runner, Unscrewing, Prototyping, Full Sampling, and Validation
A Modular Molding System, Pre-Engineered, Rapid Design, Prototyping, SMED, Offer Free Tooling of RM
Extrusion: PETG Tube 
 
Target Markets:
We are Currently 40% Medical and 40% Automotive with Remainder being a Blend of Industrial, Packaging, and Consumer. Interested in targeting: Medical, Automotive, Industrial, Recreational Vehicle, Boat, Truck, Trailer. 
 
Sales Opportunity:
PPI is a $6 million in sales company seeking to grow the injection molding sector to more than $10 million while using full tool shop to provide internal service of tooling and repair. Secondly, we seek to grow our modular molding system to a minimum of $2 million in annual sales.

We have attracted many new opportunities by gaining certified quality systems of IATF 16949 in Molding and ISO 9001:2015 in Tooling and Extrusion. Our customer base includes such companies as Smith Medical, Porex Filtration, Big Ass Solutions, Dayton Superior and Sumitomo Riko. We also land customers with the offer of free tooling for the proper volume match. Our company is unique with its supply of modular mold and total tool support of injection molding.

It's a given that we maintain an up to date website and online marketing presence. We maintain sales literature and offer sales and engineering support to our representation.
 
Company ID: 112264 - Click Here for Full Details
Product Lines:
Diesel Fuel Injection Pumps, Injectors, Engine EGR Coolers, Turbochargers, Selective Ancillary Engine Components. 
 
Target Markets:
Warehouse Distributors, Jobbers, Retailers, Large Repair/Installation Shops. OEM Service Support. 
 
Sales Opportunity:
Our company is one of the original Tier 1 OEM Manufacturers of Diesel Fuel Injection Equipment, in business since the early 1900's. We currently do a large volume with Military equipment for both the US and various allied Governments. We are expanding our "traditional diesel markets", targeting the markets listed above. We have several territories that have openings for the right Rep Agencies.
 
Company ID: 112016 - Click Here for Full Details
Product Lines:
Technical Consulting, Contract Testing, and Analytical Lab Services.

Manufacturers Representative Company Offers One-Stop-Shop Solutions for Analysis, Characterization, Measurement, Testing of Materials and Devices for Academic, Commercial, Industrial and Governmental Clients. 
 
Target Markets:
B2B Selling to Clients in Every Possible Industrial Sectors: Automotive, Chemicals, Electronics, Medical Devices, Pharmaceuticals, Semiconductors. The Clients could be in Any Phase of a Product Cycle: R&D, New Process Optimization, Failure Analysis, Quality Control, and Legal Investigations. 
 
Sales Opportunity:
We are a nanotechnology service and development company with over 10 years of successful business. It is our ongoing commitment to serve international communities through our broad range of first-class products and services.

Our Nano Analytical and Testing Laboratory provides comprehensive, advanced and critical analyses, measurements and tests of materials and devices. We deliver reliable and quality solutions for clients’ analytical and testing needs whether they are for high-level technical consulting or project driven contract lab services or capital equipment.

Our company is ISO/IEC 17025:2005 accredited! The ISO 17025 accreditation gives our lab international recognition on our testing and measurement competencies. It provides our clients another level of confidence in our excellent quality lab services.

We hope to expand and share our success and growth with commission based sales and marketing professionals and agencies. The instrument products, technical consulting and contract lab service portfolios are well-designed and market-proven solutions to clients' challenges and issues. All we need is to have the messengers to spread the words and to offer the solutions to the needing clients.

Our products are best-value, advanced and high quality. Our lab is equipped with state-of-the-art instruments. Our staff are college educated professionals with many years of experience. We will provide marketing and sales support, and training for your success.
 
Company ID: 101022 - Click Here for Full Details
Product Lines:
AS9100 & ISO900 certified Aerospace manufacturing. CNC Milling and Turning, 5 Axis Milling, Grinding, Manual Operations. Tooling, Molds, Dies, Machined Components, Fixtures, Prototypes to Production, Assemblies. 
 
Target Markets:
Aerospace, Military, Packaging, Automotive. 
 
Sales Opportunity:
Seeking a sales representative for 30 year old company AS9100 and ISO 9000 Certified CNC Machining Company. Looking for someone with contacts in the Aerospace, Automotive, Packaging or any industry that needs machined components.

Die-Verse Tool has a team with over fifty years of combined experience in our CNC milling department. We offer a full range of milling services including CNC milling capabilities of long or short run production parts and 3D contour milling with 5 Axis capabilities. Our team offers experience in jig & fixturing, tool & mold making and prototype tooling.

In addition to standard milling and tool making we are able to provide services that include prototype tryout of molds for the rubber and plastic industry, build and tryout of stamping dies as well as production runs for plastic molded parts and stampings in our facility. At Die-Verse Tool & Mfg. our primary goal is to ensure that our customers receive a quality product reasonably priced with a timely turn-around time. Six CNC Mills, Four CNC Lathes, 20 man shop.
 
Company ID: 60900 - Click Here for Full Details
Product Lines:
PCBs, Flex & Ridged Flex PCB, PCBAs, Box Builds, Front Panels & Assemblies, Wire Harnesses. 
 
Target Markets:
OEMs, ODMs, Contract Manufacturers, Custom Manufacturing, We have been targeting the Electronics Industries, Medical, Aerospace, Telecommunications, Industrial, Automotive, and more. 
 
Sales Opportunity:
Cir-Q-Tek is currently seeking Manufacturing Sales Representatives. Here is an exciting opportunity to work with a US based International company. Our services include design, fabrication, logistics, warehousing, and distribution. Base salary for experienced sales person in addition to a generous commission structure. We provide training and marketing assistance.

Product Lines:
• Printed Circuit Boards & Design
• Printed Circuit Board Assemblies (PCBA)
• Flexible & Ridged Flexible Printed Circuits & Assemblies
• Contract Manufacturing
• Custom Cable & Wire Harnesses
 
Company ID: 88403 - Click Here for Full Details
Product Lines:
Electronic Components, Electronic Assembly, Electromechanical Assembly, Cables, Injection Mold Tooling, Injection Molding, Metal Fabrication, Metals, Precision Plastics. Ceramic to Metal Components, Particle Accelerators, and Associated Components, Complete Turnkey Assembly of Electronic items. 
 
Target Markets:
Automotive Manufacturers, Appliance Manufacturers, Aircraft Industry, Entertainment Manufacturers, Arms Manufacturers, Security Industry, Medical Equipment Manufacturers, Power Industries, Applied Research, and so many more. 
 
Sales Opportunity:
We seek experienced sales reps with a strong following. All areas open. All our products and services are done in our China facilities. Excellent opportunity. Products sell well. Engineering and sales support always available. Multiple sales persons the rep organization a definite plus.
 
Company ID: 106515 - Click Here for Full Details
Product Lines:
Calibration Service, Inspection Service, Repair Service, Metrology Equipment Sales, Precision Tool Sales. Fluke, 
 
Target Markets:
Manufacturers of All Major Industies. Including: Food and Beverage, Medical and Biochemical, Aircraft, Automotive, Transportation, Electronic, Rail, Fasteners, Plastic and Steel. 
 
Sales Opportunity:
Percentage of gross sales based commission, paid monthly.

ISO 9001 & IEC 17025 Accredited manufactures are Required to enlist accredited calibration laboratories. Large, global manufacturers are ideal potential customers. With years of experierence our certified technicians and customer service members offer great technical support when it comes to answering customer questions regarding service and product. Along with the dozens of companies we have partnered with in distribution, Sales representatives will have a full support team to their advantage.
 
Company ID: 111080 - Click Here for Full Details
Product Lines:
Our Firm Designs, Engineers, and Manufacturers Structural Composite Roof Deck Systems.

Our System has been Used for 48 years on Structures from 1,000 sq.ft. to 1,000,000 sq. ft. It is Used on Flat, Sloped, and Curved Roof Structures. Installation is by Licensed and Trained Roofing Contractors. 
 
Target Markets:
Markets are Elementary Schools, High Schools, Colleges and Universities, Elderly Care Facilities, Public Structures (Airports, Court Houses, Fire Stations, Police Stations) and Structures that are Built for Long Term Service. Sales are Made to Architects and Engineers Designing the Structures. 
 
Sales Opportunity:
Our company has the potential to become a reps most profitable account. While it has a lead time since it must be designed in the structure, once designed into the structure it is very difficult to change due to the performance it provides. It has areas of performance that competitive systems can not match. We are a set-up to provide our agents total support on designs and engineering in a timely manner, allowing them to be responsive to the Architect or Engineers questions and needs.

We provide warranties from 10 years to 40 years depending on the system and installers guarantee their workmanship for the same time. This is a unique performance warranty that is unmatched in the industry. Commissions are paid on the number of sq. ft. in the roof deck area plus edge supports details. Our top producers earn six figure incomes annually.
 
Company ID: 110643 - Click Here for Full Details
Product Lines:
Our company Makes Wire Rope Assemblies Up to 1/4" for a Variety of Industries including: Lighting, Marine, Defense, Aerospace across the US. 
 
Target Markets:
Lighting, Marine, Defense, Medical Equipment, Overhead Door, Aerospace. 
 
Sales Opportunity:
We are a small 30+ year family owned company which has never done any sales or marketing. We are looking to significantly grow our business and are searching for a sales partner to help us accomplish this goal. We serve a wide variety of industries and are known for our low prices and very quick turnaround.
 
Company ID: 109866 - Click Here for Full Details
Product Lines:
Recognized Leader in Metal Stampings, Fabrications, Vertical Machining, Welding, Assembly for over 75 years.

Our Company Specializes in Short to Medium Run Metal Stampings, Fabrication, Machining, and Assembly Complement the Product Offering. 
 
Target Markets:
Medical, Aerospace, Agriculture, Automotive, Industrial, Recreational. Our Current Customer Base is National and of High Quality. Reps sell to Global Supply Managers, Product Engineers, and Purchasing Managers. We Currently Manufacture Parts and Assemblies to Major Corporations with Many Current Accounts. 
 
Sales Opportunity:
Represent our product offering on a commission basis. Needs are in the New England area including Western PA, NY, NJ, CT, MA, NH, VT, Maine, MD, DE. There are many existing accounts that are established. I am looking to grow in that market. The selected agency will service two divisions within our company and have an immediate commission base. Our company participates in trade shows and other sales activities to assist in generating leads. This position has the potential to grow the established territory in a very short period of time.
 
Company ID: 109769 - Click Here for Full Details
Product Lines:
Automotive Aftermarket Parts
Oil Pans
Window Regulators
Wiper Linkage
Fuel Pumps 
 
Target Markets:
Automotive Wholesale Distributors in the US market 
 
Sales Opportunity:
I have worked in the automotive industry for 35 years in various levels and areas. We are a US based company with our warehouse located in Indiana, which allows us to provide the best possible logistic services to our customers. Our company plans on expanding its product ranges and coverage per product line greatly over the next six to twelve months. Our goal is to provide superior customer service, quality parts at a competitive price to our customers.

Our company is a provider of complete assortment of automotive parts, focusing on the replacement parts market. We have partnered with top quality manufactures in specific product ranges to provide the best competitive prices and quality service to our current and future customers. Our current lines are Fuel Assembly Modules, Window Regulators, Engine Oil Pans, EGR Coolers, VVT Valves and Wiper Linkages.

Through our experience and contacts at all levels throughout the industry globally we are confident we will be successful at integrating our company into the North American market. We are in the process of looking for Sales representation in the United States to work with us and help our company grow it sales in the North American market. We are open to Salary plus commission or commission only depending on the person or rep agency.
 
Company ID: 40814 - Click Here for Full Details
Product Lines:
We are a China based company who has a Proven Track Record throughout the World.

1. Mold Making, Plastic Molding, & Metal Stamping.
2. PCB Design Engineering, PCB Layout, Rapid Prototyping. PCB Assembly Capabilities include SMT (Surface Mount Technology) & Mixed Technology (SMT + PTH). 
 
Target Markets:
Companies that are looking for Electronic Products, Mold and Molding, Casting Parts that offer Great Quality, Pricing and Customer Satisfaction. Our target customers are OEM Manufacturers Seeking Support in Product Development and Manufacture to Improve their Product Systems. 
 
Sales Opportunity:
Excellent Commission Structure and Protected Territories for Reps. Our company is very stable. We are also looking for reps Worldwide. Submit your sales inquiry for more info.
 
Company ID: 109556 - Click Here for Full Details
Product Lines:
LED Indoor, Outdoor, Landscaping Commercial Fixtures. 
 
Target Markets:
Local Lighting Distributors, Lighting Showroom, Electrical Supply, Multi-Family Supplies. 
 
Sales Opportunity:
We provides sustainable LED lighting fixtures with good design and reasonable price. We inventory in TX and ready to ship anywhere in United States. We have good compensation for our reps and have sales assistant and lighting consultant here to answer all your questions for your customer. Thank you.
 
Company ID: 17142 - Click Here for Full Details
Product Lines:
We Manufacture over 1,300 Industrial Specialty Chemicals for Metal Finishing and Phosphating, Metal Working, Metal Cleaning and Re-Manufacturing, Plastic Cleaning, Rust Prevention and Removal, Wastewater Treatment, and Water Treatment Applications. 
 
Target Markets:
Plant Managers, Engineers, Chemists, and Production Managers in All Industrial Manufacturing and Remanufacturing Facilities. Specific Targets include Plants that Machine, Manipulate, Clean, or Paint all Metal and/or Plastics. Other Target Industries are General Manufacturing, Re-Manufacturing, Metals, Food and Beverage, Concrete, Transportation, plus many others. 
 
Sales Opportunity:
Industrial specialty chemicals are a long-term commission opportunity. Products are sold and serviced on a weekly or monthly basis based on sales volume and customer expectations. Commission opportunity is 50% of gross profit margin. Chemical sales and/or service experience is highly preferred, as this is a technical field of which knowledge, experience, and a strong work ethic is rewarded.

This would be an excellent opportunity for both a full-time or semi-retired chemical specialist with built relationships, social ability and chemical problem solving skills. A person would expect to earn $100,000 on $500,000 of yearly sales with our company. Our chemical blending facilities are located in New York, Tennessee, Ohio, Indiana, Texas, and California USA.

Product specialties include: Metal Finishing (All cleaners and deoxidizers, Iron, zinc, and manganese phosphates, Non-chrome and chrome seals, Nanotechnology and non-phosphate pre-treatment), Metal Working (Drawing, Stamping, and Rust Inhibitor Compounds), Paint Strippers, Rust Removers, General Plant Cleaners, Waste Water Treatment, Boiler-Cooling Tower-Closed System Treatments, a full line of Green products, plus many others.
 
Company ID: 96119 - Click Here for Full Details
Product Lines:
We Manufacture Forged Steel Products for the Automotive, Heavy Truck, Heavy & Light Industrial, & Oil and Gas Industries.

Our Engineering Department can Design a Wide Variety of other Products within our Forging Operation to meet the Needs of almost any Company looking for Quality Forged Products. 
 
Target Markets:
Reps will be Calling on the Major Oil Companies & Independent Field Service Companies. We are also Interested in other areas, including the Major Tier I & Tier II Automotive Suppliers as well as Agricultural and Industrial Fields that are in Need of Hot, Warm, or Cold Forgings. 
 
Sales Opportunity:
Our company is one of the largest forgers to most industries using forged products. We have a great team of engineers with years of forging experience to ensure we are putting out quality, well priced products. We have the capabilities to design products to our customers specification. We pride ourselves on making the best quality product totally Made in the USA. We are ISO 9001:2008 compliant

** Please include companies currently calling on or previously called on in resume after we contact you.
** Successful sales record involving forgings is required.
 
Company ID: 107532 - Click Here for Full Details
Product Lines:
We are a Manufacturer of Deep Drawn metal Components as well as Flat Stampings and Progressive Eyelets.

We Specialize in many Different Grades of Stainless Steel as well as Aluminum, Brass, Copper, and many other Steel Alloys. We also Specialize in Tube Fabrication. 
 
Target Markets:
Hardware, Automotive, Electronics, Medical, and a Variety of Detonator Caps for Military Defense as well as Demolition. We also have a Medical Division that Specializes in Producing Parts that are made of many different types of tubing. 
 
Sales Opportunity:
Our company is an ISO 9001:2008 company. Our deep draw division is capable of drawing to depths up to 2.562 (.1008 mm) deep. The deep draw division also accommodates in line roll threading, bulging, and many different types of piercings. Our stamping division has capabilities to accommodate up to .100 (.0039 mm) thick material and specializes in inline tapping.

Within the Medical division, we also specialize in laser cutting, forming, welding, and many other types of processes. Our Manufacturing facility consists of twenty transfer presses and twenty four stamping presses. We have support equipment that gives us the edge on building all tools within our facility in order to capitalize on lead times as well as cost savings.
 
Company ID: 102108 - Click Here for Full Details
Product Lines:
We are a Direct Manufacturer Positioned as a Pop-Up Expert.

We make a lot of Pop-Up Items, from Pop-Up Soccer Goals for Youngsters to Garden Cages and Grow Tunnels for Garden Lovers, as well Pop-Up Play Tents for Kids. We also Welcome OEM or ODM Orders. 
 
Target Markets:
Distributors and Retailers (both online and offline). Garden Centers. 
 
Sales Opportunity:
1) We are a direct manufacturer that are innovative and care about quality.
2) We have a very good product development as well production team to stand behind our products.
3) Our products are generally unique.
4) We might offer free samples if necessary.
5) The rate of commssion is between 5% and 10% depending on the sales price. And commission will be paid when the transaction is over. The cargo is delivered, and the payment from the end customer is paid.
 
Company ID: 79311 - Click Here for Full Details
Product Lines:
Metal Stampings, Machined Parts, Plastic Parts Assembly. 
 
Target Markets:
Electronics Industry, Equipment OEMs, Appliance Industry, Automotive, etc. 
 
Sales Opportunity:
Sales opportunities to many varied industries using custom metal and plastic components. Manufacturing support includes over 450 workers, paint and finishing facilities, excellent quality control. Sales opportunities in most territories.
 
Company ID: 105933 - Click Here for Full Details
Product Lines:
Energy Monitoring Sensors.

We Manufacture Current, Voltage, Power, Frequency, and Power Factor Analog and Digital Transducers. We also Offer Current Transformers, Current Relays, Switches and Displays, Custom Designed OEM Units. 
 
Target Markets:
Engineers, Purchasing Agents, Utilities Companies, OEM, Distributors and End-Users. 
 
Sales Opportunity:
Our company is a privately owned business since 1986. We have over 18,000 customers in our database. Customers provide repeat buisness year after year. Our product offerings cover just about any monitoring needs including DC and if we don't have it our experienced Engineering team can custom design it. We own our own building and manufacture most products here in our St. Louis, MO. facility.

We control our own overhead and expenses to compete in almost any market. We have two SMT circuit board stuffing machines, a laser cutter and UV printer for custom labeling and packaging. Travelling with our Reps to train them and get experienced with our products is a number 1 goal to make both companies successful.

Our customer database is shared with the reps and they are treated as an extension of our sales force. Commission structure is 5% for the territory on standard parts and 10% for custom designed units. Very few house accounts in any territory, although there might be some. We are very fair about making sure our Reps are paid the money they helped earn.
 
Company ID: 103460 - Click Here for Full Details
Product Lines:
We are Trailblazing Telecom Carrier Engineers with 30+ years Industry Insight.

See Homepage Video for Designs in Layman's Terms. (Not Bill Auditors or Sales Folks Wearing Lab Coats). We Design, Broker, and Manage our Client's Telecom. (Highly Advanced Hired Guns; Far from the Typical Offering). 
 
Target Markets:
We Work with All Industries and Serve all Locations within the USA and Canada Focusing on the Small to Medium Size Business Market (50-5,000 employees). Phone Companies Pay Us to Join their IT Team as WAN Experts, Saving Client's Money and Aggravation. 
 
Sales Opportunity:
Our company (with insight shared by less than 1% of the industry!) is truly a ‘one of a kind’ turn-key telecom solutions provider that designs, brokers, and manages our client’s network and cloud environment. Our goal is to save our clients money and aggravation the correct way by taking an engineering approach to cost savings and network optimization.

We are a Carrier engineering firm who actually:
 Designed and built the phone company central office equipment
 Designed and built the telecom provider’s core networks
 Helped define the services you buy from those carriers
 And developed their provisioning procedures

This affords us the unique intellect and capacity to understand and address their deficiencies. Please allow me to acquaint you with the significant value-add that comes from a highly influential engineering firm handling the design, procurement, and management of your telecom accounts…at no new or additional fees than what you already pay today, just highly improved performance and savings.

We make it possible for downsized IT teams to survive and thrive in an age of budget cuts. Please submit a sales inquiry to us, and we will email a link for an intro video to explain. Thank you.
 
Company ID: 104779 - Click Here for Full Details
Product Lines:
Slitting, Cut-to-Length, Storage, Plasma Cutting, and Forming Services. 
 
Target Markets:
OEM and Contract Manufacturers, Distributors and Brokers looking for a Facility to Process Material. 
 
Sales Opportunity:
MSP is the sole HR, HRPO, CR and Coated processor ONLY on the Steel Dynamics Campus in Columbus MS. The 250,000 sq ft rail served facility has 3 slitting line, 2 cut-to-length lines, 3 plasma tables and one press brake. it is rail served and offers no inbound freight from the mill to our facility. MSP is not a buyer of material and ONLY processes. Therefore it does not "chase" customers to sell steel.
 
Company ID: 104048 - Click Here for Full Details
Product Lines:
CNC Rotary Tool Holders
High Performance Taps
Precision Measuring Intruments 
 
Target Markets:
Distribution
End-Users 
 
Sales Opportunity:
We are a 55 year old Distributor that have developed our owns lines of Toolholders, Vises, High Performance Taps, and Precision Measuring instruments. We sell strictly through distribution.
 
Company ID: 101189 - Click Here for Full Details
Product Lines:
Precision Sheet Metal Fabrication:
-- Design Engineering Assistance (10 Fulltime Manufacturing Engineers)
--> Customer Owns Design, we Provide Best Possible DFM.
-- Mechanical Assembly
-- Light Electrical Assembly
-- Supply Management 
 
Target Markets:
Part of the Core Mission of our Company is to be Diversified Amongst Commodities and Customers within Commodities. Telecom, Aerospace, Security ID, POP, Medical, Racks, Enclosures, Audio/Visual Mounting Systems, Agricultural, Automotive, Defense, and Gaming. 
 
Sales Opportunity:
1. Working Ownership
2. Financially Strong
3. ISO9001:2008 Certified and ITAR Certified
4. Our company believes in creating, sustaining, and supporting long - term relationships. Our core vendor base is made up of "primary" and "secondary" vendors that have partnered with us for the long term.
5. We are not a "one type of fab" facility. Our core strength is DFM, quick-turn prototype, and production fabrication up to any level a customer should require.
6. 110,000 square foot facility, state of the art, and climate controlled.
7. Near zero turn over in skilled positions.
--> In-house blueprint training & math classes in an effort to promote from within.
8. Very strong in design engineering input for best possible DFM.
9. Seven (7) Turret Punch Presses, (6) Lasers (3 are 24/7 FMS Systems, with one being a Fiber system), 26 Press brakes, 12 hardware machines, and all the supporting equipment a facility like ours needs.
10. We have a full weld/spot-weld shop, but we stress riveting due to overall cost, strength, and cosmetics.
11. We lean toward press hardware versus extrude/tap, but we do both, having automated tapping in our turrets and stand-alone automated tapping work stations.
 
Company ID: 99390 - Click Here for Full Details
Product Lines:
Aluminum Intake Spacer that Installs in the Intake Manifold of Class Eight Big Trucks. The Spacer has a Unique Helix Cut Inside the Bore Opening.

Our 2nd Product: Intake system Tester Specifically Designed for Diesel Work Shops to Pressure Test the Complete Intake System. 
 
Target Markets:
The Aluminum Intake Spacer is Targeted to One Owner Class Eight Truck to Any Large Fleet of Trucks.
The Diesel Intake System Pressure Tester is Primarily Sold to Independent Class Eight Shops, Truck Dealers, and Fleets. 
 
Sales Opportunity:
The aluminum intake spacer has been on the market over seven years and have sold thousands in over sixty locations in US and Canada. We have not
yet scratched the surface with the intake spacer sales to the large number of trucks on the road.

Great opportunity with the diesel intake system pressure tester. The tester has only been on the market 1 1/2 years. We have had great feed back from truck dealerships, school districts, diesel tech. schools, fleets, and independent repair shops that have purchased and using tester.

We furnish brochures and videos on flash drives for both products. Commissions are set at 10% for intake spacers and 10% for the system tester.
 
Company ID: 64844 - Click Here for Full Details
Product Lines:
Plastic Injection Molding.

Thermoplastic Molded Products for all Industries, Optics and Clear Molded Parts, High Strength Mechanical Parts, High Tolerence Parts, and Insert Molding. In-House Mold Making Capabilities. 
 
Target Markets:
Electronic, Sensors, Optical, Material Handling, Automotive, Heavy Equipment, Medical, Dental, Fire Protection, Safety, General Industry. 
 
Sales Opportunity:
We are a high quality thermoplastic injection molder that has a great reputation for Servicing our customers. We have been in business for 27 years and have experienced a good growth track record. We have Openings for Reps that would like to work directly with the owners of the company. Our Company is ISO9001:2008 Certified.
 
Company ID: 65488 - Click Here for Full Details
Product Lines:
Well established Tooling and Equipment Manufacturer.
Areas of Expertise: Design and Build Metal Stamping Dies, Special Machines and Equipment, Automated Lines, Contract Metal Stamping, Precision Machining. 
 
Target Markets:
Major OEM's, Appliance, HVAC, Lawn/Garden, Automotive, Recreation Markets: USA, Mexico, South America. 
 
Sales Opportunity:
We are a well Established Manufacturer of Tools, Dies, Automated Lines, and Special Equipment. Interested in sales representation in geographic areas or industries in US and Mexico. 5% commisions on quoted jobs received.
 
Company ID: 116093 - Click Here for Full DetailsNew Profile
Product Lines:
Equipment that road builders or contractors could use. 
 
Target Markets:
Companies that supply products to construction companies. 
 
Sales Opportunity:
I have proven equipment patent pending. We are looking for reps that are already selling equipment to distributors that sell to construction companies. 4-7 % of gross profit.
 
Company ID: 116081 - Click Here for Full Details
Product Lines:
Multi-Function Test Equipment that includes: a Spectrum Analyzer, Power Meters, Measurement Receiver, Signal Generator, Tracking Generator, Cable Fault Locator, and many other Capabilities including Protocols Used in Land Mobile Radio (LMR). 
 
Target Markets:
We are Looking for a Rep Company that Specializes in US Federal Government Selling with the Ability to Sell RF Test Equipment. 
 
Sales Opportunity:
We are looking for a firm to sell our industry-leading line of communications test equipment for Land Mobile Radio (LMR) applications to U.S. Federal Government accounts.

We are a fast-growing industry leader in test instrumentation for two-way radios and radio systems, headquartered in Kilgore, Texas where our products are also designed and manufactured. Our communications analyzers are widely recognized as the leading LMR test sets in the market. We have a commanding presence in the commercial, industrial and state & local government markets and are looking for a partner to help us grow our presence in the USFG domain to a comparable level.

The ideal representative will have a deep understanding of USFG procurement, particularly in connection with radio communication and associated test equipment. The representative will also know the key influential individuals and organizations and understand the best way to approach, influence and communicate with them. Our company is looking for a long-term partner to help us develop our USFG penetration strategies and most importantly, to execute those strategies for growth in both the near and long-terms.
 
Company ID: 110533 - Click Here for Full Details
Product Lines:
Our Patented "2 Part Activation", "Green", Bio-Degradable, Mold Remediation & Cleaning Products Tap the Power of Hydrogen Peroxide to Foam Away Mold, Mildew, Algae & other Crud.

ALSO: Sealant/Encapsulant w/ 25 Year Warranty. Rust Stain Remover. Concrete & Roof Cleaners ...and More! 
 
Target Markets:
Pest Control
Mold Remediation, Abatement & Restoration
Water, Fire & Smoke Damage
Pressure/Power Washing
Deck/Fence Cleaning
New Home Builders
Hardware Stores
Cleaning & Janitorial Supply
RV Dealers
Marinas 
 
Sales Opportunity:
Can you help us to take this product line to US and Canadian markets?

Generally looking for those who have the ability to take the line into 1 or more of the target markets listed above, and then on into other markets as they are able and see fit. We are looking for motivated, well-connected and self-sufficient individuals to join the team we are building.

Owners of pest control, mold remediation & restoration, pressure/power washing, deck & fence cleaning will want our products because they SAVE TIME on the clean up end of a job.

Did you know that there are Pest Control Associations for about 45 of our 50 states? Join one as an Associate Member. They will give you the Member Directory. Penetrate the membership of the association. And you will soon be moving product by the pallet and making some really good money.

We can private label for customers that are interested.

And our sealant/encapsulant offers a "25 Year Renewable Warranty", which can be used by the pest control or mold remediation business owner to generate residual income on warranty renewals, while keeping more business on the books.

Strong applicants should have:
a) Previous experience selling this type of product line, along with,
b) A significant base of existing contacts from 1 or more of the target markets listed above, that you can call into right out of the gate

This is a 1099 Contractor position. Straight Commission with Bonus Program.
 
Company ID: 116059 - Click Here for Full Details
Product Lines:
Metal Stamping Short to Long Runs, Tool Design and Build, Research and Development. 
 
Target Markets:
Automotive, Agriculture, Aerospace, Appliance, Packaging, and Various Industries. 
 
Sales Opportunity:
Seeking commissioned sales rep with over 10 years experience in steel stamping industry. We offer an excellent commission package and flexibility. We are a woman owned manufacturer based out of Chicago area but are a global supplier. We recently acquired a 63 year old stamping house and are excited to grow the business. We are looking for someone to lead this department.
 
Company ID: 116008 - Click Here for Full Details
Product Lines:
Precision Machining, CNC-Turning & Milling, EDM-Wire, Sinker, Drill, Manual Lathes & Mills, Grinders-OD, ID, Surface, Lapping, 3D Printing, Sheet Metal, Full Metrology/Quality Inspection Lab. 
 
Target Markets:
The following Customers are who we market to; Manufacturing, OEM, Medical, Aerospace, Firearms, and pretty much any Facility that has Machining Needs. We are also Open to New Markets. 
 
Sales Opportunity:
Our company offers competitive commission, engineering assistance, and site visits with customers. We have earned a solid reputation for top-quality work, fast efficient service, and competitive prices. We specialize in close tolerance work, both in final part product, tooling, precision gages and fabrication.
 
Company ID: 114605 - Click Here for Full Details
Product Lines:
Fire Extinguisher Cover
Fire Extinguisher Bracket
Fire Extinguisher Caddy 
 
Target Markets:
Fire Extinguisher Service Companies, Industrial/Construction Wholesalers. 
 
Sales Opportunity:
Fire Extinguisher Covers - Sell large quantities and place your service company’s name on the cover. It’s like a business card on every cover.
Grip Bracket - One bracket fits all portable extinguishers, stainless steel construction.
Extinguisher Caddy - Ideally suited for construction sites, extinguisher rentals.
 
Company ID: 116017 - Click Here for Full Details
Product Lines:
Surface Finishing & Anodizing Services that Deliver Functionality & Beauty.

Produce Flawless, High Performance Finishes on Aluminum, Magnesium, Steel & Stainless Steel, Copper Alloys, & Zinc Die Cast. Capabilities include a Metal Polishing & Buffing Department, plus Three Electroplating Lines. 
 
Target Markets:
We are an Approved Metal Plating and Finishing Supplier for:
Automotive Manufacturers
Motorcycle Manufacturers
Medical Supplies and Equipment Manufacturers
Electronics Manufacturers
Aerospace Manufacturers
Gaming/Slot Machine Manufacturers
Oil and Gas
Consumer Product Manufacturers 
 
Sales Opportunity:
We are expanding our rep network and looking for motivated independent reps to work on commission basis. All territories are located in North America. You prioritize our products and we prioritize you We believe that if our reps are successful, we are successful! We are looking for a win-win partnership.

Our company has been in business for 60+ years. Quality is the cornerstone of our business. Our unwavering commitment to uncompromising quality mandates that we maintain and continually identify ways to improve product performance. As an ISO 9001:2015 company, this quality commitment extends to our 24/7 laboratory capabilities. We provide tremendous in-house support and work as a team to help you facilitate sales and keep our customers satisfied. Join our team today!
 
Company ID: 115591 - Click Here for Full Details
Product Lines:
Swimming Pools. 
 
Target Markets:
Customers that have been pre-approved 
 
Sales Opportunity:
A Rare Opportunity. Sell pools this summer and make $10K-14K per Month! One call close experience is a plus and we pay your gas to run credit approved TV and internet leads. Customers call us! No cold calling or telemarketing leads.
 
Company ID: 116001 - Click Here for Full Details
Product Lines:
Accounting and Bookkeeping Services for Small to Mid-Sized Companies.

All Bookkeeping Services including AR, Collections, AP including 1099s, Payroll Services including Payroll Tax Returns, Sales Tax Returns, Bank Reconciliations, All Financial Reports, Accounting and Business Management Services. 
 
Target Markets:
Manufacturing & Telecommunication. 
 
Sales Opportunity:
We are specialists in the Manufacturing industry. With over 35 years of experience and knowledge of all processes including management and accounting, job costing, HR, Doc Control, Purchasing, Production Control, and Quality Management. We have the expertise that it takes to assist manufacturing companies with any problems that they may have, to improve their accounting processes, provide the financial information, tools, and ideas that they need to successfully run their business and improve their profits.

We would like to find a sales rep on commission basis to start off, to assist our start-up business, use their professional sales tools, give us advise, and to grow with us. This is a perfect opportunity for someone who sells to the manufacturing industry and is wanting to assist a start-up, to help a company grow, with the ability to have their input, and advice to the owners about sales and marketing.
 
Company ID: 115997 - Click Here for Full Details
Product Lines:
Educational Training and Consulting Services to Corporations. 
 
Target Markets:
Presidents, CEOs, Training Directors, Sales Directors. 
 
Sales Opportunity:
Work the phones from home to contact the thousands of companies across America, representing one of the most successful training programs on the market today. With 20 years of proven results, we work with owners of all size businesses to increase sales and market shares, improve productivity, reduce turnover, increase profits and maximize owner equity. Our business model is simple - we save companies money and improve their business or they own us nothing. We have never had to take that position because we are the best at what we do.

Our Education Division utilizes one of the foremost training programs in the industry and has a way of helping employees to achieve their maximum personal and business potential. We customize the learning platforms to match the industry and specifically to the company client.

We work with employee groups numbering from ten to five hundred at a time, including all levels of management, in order to optimize results. We come to the company training center or meet at off-sites for company retreats. You control the pricing structure so you essentially write your own ticket. If you call yourself a professional salesman and like making into the six figures, then this is worth looking at. It may not be for you, but if it is, it will mean $.
 
Company ID: 115996 - Click Here for Full Details
Product Lines:
European Made Premium Quality Hand Tools with Heavy Emphasis on Safety/Innovation.

Non-Sparking Copper/Beryllium, Aluminum/Bronze, Magnesium/Bronze Titanium, Stainless Steel, 1000V Insulated, Anti-Drop, Pipe and Plumbing, Industrial, Never Offered or Available in the US or Canada.Underwater, ESD. 
 
Target Markets:
Petro/Chemical, Mining, Transportation, Military, Ship building, Railroads, Utilities, Aerospace, Defense, Airlines, Commercial/Industrial HVAC-R, and Plumbing. 
 
Sales Opportunity:
Ground floor opportunity for seasoned sales reps, Accournt Managers with proven track record of success in above noted industries selling industrial grade hand tool solutions to National Accounts, multi-site, or single standing large accounts. Reps must possess credentials and security clearances to readily obtain access to high security customer environments. Additional incentives for initial orders and retention beyond standard Manufacturer Rep Commission structure. Products NOT available through distribution anywhere in US/Canada.
 
Company ID: 115720 - Click Here for Full Details
Product Lines:
We Manufacture the World's Only Noise Cancelling, Voice Isolation Microphone for Speech Recognition and Private Voice Communications.

It Allows Anyone to Work and Communicate Without having to Worry about Disturbing Others or Being Overheard while Simultaneously Cancelling All Background Noise. 
 
Target Markets:
The Customer Base for our Product is Virtually Infinite. It Encompasses Anyone who Uses Voice Technology that has a Need for Privacy and/or Noise Cancellation. i.e. Physicians, Healthcare, Open Office Workers, Students, Educators, Military, Law Enforcement, Lawyers, Commuters. 
 
Sales Opportunity:
The customer base for this product is virtually infinite. Some of the vertical markets include: Healthcare, law enforcement, military, security, legal, interpreters, assistive technology, education, commuters, open office workers, processing plants, manufacturing, construction, recording studios, film sets, engine rooms, concerts, airports, nightclubs.

Growth - With over 70% of offices now open plan coupled with 40% of smartphone owners using some sort of voice recognition software. Speech is quickly taking over as the user interface to all manner of gadgets and devices.

Competitive Advantages:
• There is no competition, this is the only device of its kind
• First to market
• Patent Protection with both design and utility patents
• Sole source, highly scalable
• It can be used with phones, computers, transmitters, recording devices, etc.
• Worldwide markets
• This disruptive innovation provides a unique opportunity to enter, control and leverage entirely new markets

We are looking to retain the services of commission only sales representatives for the purpose of selling of our products. With approved sales reps earning a 20% Gross Sales commission paired with incentives that can increase the commission rate to 35%. Ideal reps should have (but are not limited to) reasonable working knowledge of technology such as computers and smartphones. Bonus for reps experienced in speech recognition technology, microphones, transcription.
 
Company ID: 115957 - Click Here for Full Details
Product Lines:
Looking for Sales Reps that can Obtain Work for our Custom CNC Machine Shop .

We are Able to Custom Machine Parts to the Customers' Requirements. 
 
Target Markets:
Our markets include Automotive, Military, Aerospace, Construction, Pharma, and Oil and Gas. 
 
Sales Opportunity:
Excellent opportunity for manufacturer's rep to team up with a company that has been in business for 20 years with current ISO 9001 -2015 Certification. We are a small company that can quickly meet the need's of the customer's requirements. Over 10 newer quality CNC machines. Commission structure to be worked out.
 
Company ID: 115925 - Click Here for Full Details
Product Lines:
LED's for Big Three taillight clusters 
 
Target Markets:
First Tier Manufacturers in southeast Michigan. 
 
Sales Opportunity:
LED for rear taillight clusters. Calling on first tier manufacturers who in turn sell to USA Big Three.
 
Company ID: 109875 - Click Here for Full Details
Product Lines:
General Electronic Household Goods, Functional Electronics, and Devices for Everyday Use. 
 
Target Markets:
It's Global Market Strategic Network Programs of Sales Team Across the Globe. 
 
Sales Opportunity:
Selling career cannot be limited to certain area of geography but could be expanded to any area of interest wherever goods meet demand. My belief about global trade is that it is a great opportunity for developments. Trade by true definition cannot be closed minded. A salesman cannot be closed on the perimeter of running opportunity. Travel where trade takes you.
 
Company ID: 115898 - Click Here for Full Details
Product Lines:
Harness and Cable Assemblies
Electromechanical Assembly
Over Molding and Others 
 
Target Markets:
Medical
Equipment Manufacturers
Military
Specialty Automotive and Others 
 
Sales Opportunity:
Our expanding company has a proven track record with positive and mutually beneficial sales rep relationships (references are available) in the sales of our harness and cable manufacturing and electronic assembly including PCB assemblies. Our sister companies provide options and opportunity for true integration of processes that support vertical manufacturing opportunities.
 
Company ID: 115873 - Click Here for Full Details
Product Lines:
We are the US Based, 39 year old Manufacturer of Perimeter Access Control for all Types of Doors and Gates.

Commercial, Industrial, and Residential Equipment includes Keypads, Card Readers, Weigand Controllers and Telephone Entry Equipment. Stand Alone, Wireless, PC Based, and Cellular Controlled. 
 
Target Markets:
Our Primary Method of going to Market is Through Stocking Distributors. However, Depending on the Industry Space we do Provide Products to the Installing Company. 
 
Sales Opportunity:
We are well established in our immediate industry of gate access control for vehicles and pedestrians. We are looking to expand that customer base as well as expand into the different spaces of residential and commercial building automation, overhead door and security industries. Reps will have full manufacture support regarding equipment operation and educational support to the distribution and installation networks.
 
Company ID: 115882 - Click Here for Full Details
Product Lines:
Contract Manufacturer of Printed Circuit Board Assemblies, Cable Harness Assemblies. 
 
Target Markets:
Have Sales in the following Markets: Automotive, Industrial, Medical, and Consumer Products. 
 
Sales Opportunity:
Our company is a Contract Manufacturer for Printed Circuit Board, Cables and Wire Harness Assemblies. Established in 1970, we pride itself on the guarantee to unsurpassed quality, service, and extreme competitive pricing.
 
Company ID: 115877 - Click Here for Full Details
Product Lines:
Our Company is a Service Provider for the Destruction of Data on Electronic Media, and Green Recycling of the By-Products.

A National Service Offering for Organizations to Ship their End-of-Life Data Containing Media, such as HDDs, to our Facilities in Fort Myers. 
 
Target Markets:
Hospitals, Medical Clinics, Law Firms, Fortune 2000 Companies, Engineering Firms, All Local, State, and Federal Government Agencies. 
 
Sales Opportunity:
Straight 10% commission. Very high income potential. This opportunity is ideal for sale reps with a strong technical or security background. The more you understand the significance of protecting end-of-life processing of electronic media containing Government sensitive or corporate sensitive data, the higher your income potential will be.
 
Company ID: 115274 - Click Here for Full Details
Product Lines:
Forging, Aluminium Die Casting, Casting, Stamping, Precision Machining, Customized Engineering, Contract Manufacturer, Sub-Assembling; Hydraulic Cylinder Heads, Hydraulic Fittings, Adapters, Valve Block, Pump/Valve Accessories, SAE Flanges. 
 
Target Markets:
Manufacturing, OEM, Automotive & Commercial Vehicles, Hydraulic Fluid System, Agriculture Equipment, Construction Equipment, Medical Equipment, Engines, Recreational Boats/Vehicles, Appliance Parts/Components. 
 
Sales Opportunity:
We are an oversea manufacturer that has our own forging, tooling design and manufacturing capacity. Our precision machining facility are equipped with over 200 CNC machines and several machining centers. We have a warehouse in GA to offer JIT delivery and other services to our customers. We hold IATF 16949:2016 & ISO 14001:2015 & ISO 9001:2015 and we are familiar with PPAP and other quality processes in the industry. We offer competitive commission rate in the industry and look for long term relationships!
 
Company ID: 115804 - Click Here for Full Details
Product Lines:
PCB Assembly, BGA, Micro BGA, SMT, and Through Hole. 
 
Target Markets:
Industrial, Commercial, LED, Medical, Gaming, Aerospace, Military. 
 
Sales Opportunity:
We are an electronic contract manufacturer who has been in business since 1998. We are growing and looking for new opportunities. We operate out of a 25,000 sq ft building with 2 SMT lines and we have plenty of available capacity. We currently build boards for Honeywell, System Sensor, Cummins Allison, Kinze, ITW, Lecip, Methode Electronics, and many others.
 
Company ID: 115790 - Click Here for Full Details
Product Lines:
We are a Global Manufacturer of Worm Gear Jacks, Linear Actuators, Universal Joints, Gear Boxes and Other Linear Motion and Power Transmission Products. 
 
Target Markets:
Spiral Weld Pipe Mills, Saw Pipe Mills, ERW Pipe Mills, All Tube Mills, Process Plants, Cement Plants, Steel Plants - Hot and Cold Rolling Printing Paper Packaging, Petro Chemical, Antenna Position, Aluminum, Food and Beverages, Conveyor Systems, Ships Berthing Automobile Assembly, Textile Machinery. 
 
Sales Opportunity:
Wide range of products. Supplying to Duff norton for more than 15 years. Wide range of Industries to approach. Other terms will discuss In-person. We also offer end to end solution in to client's requirements. We have offices in India and North America.manufacturing Screw Jacks, Universal Joints, Solar Actuators, Bevel Gear Boxes.
 
Company ID: 34640 - Click Here for Full Details
Product Lines:
Industrial-Strength Powdered Hand Cleaner. This Hand Cleaner is a Powder and is Pumice-Based. It Contains No Chemicals Nor Detergents. It does Contain Pure Soap and a Natural Skin Conditioner that leaves hands feeling as if you put lotion on them. 
 
Target Markets:
Automotive/Truck, Tire Paint Body Shops, Brakes Mufflers Transmission, Radiator Dealerships, Glass Machine Shops, Diesel, Oil & Lube, Print Shops, Plumbing, Greenhouses, Locksmith, Farms & Ranches, Electric Motor Rewind, Manufacturing, Fabricating, Tool & Die. 
 
Sales Opportunity:
History:
We have Manufactured & Sold this Hand Cleaner for over 50 years. Our Hand Cleaner is the best hand cleaner on the market for thorough cleaning.

Product:
Our Hand Cleaner is Powder, it's Abrasive, use it with Water, and it will Clean Better than a Scrubbing Brush, yet it will leave your Hands Feeling as if you just put Lotion On them. It is a Pumice Base, and it contains a Mild Pure Soap and a Skin Conditioner. This Hand Cleaner contains No Harsh Chemicals nor Detergents that can cause problems with Dryness and Cracking.

Customers:
We have customers all over the West that have been using this hand cleaner for a very long time.Tire Shops, Print Shops, Automotive Repair, Greenhouses, Auto Glass, Muffler Shops, Auto Body and Paint Shops, Radiator Shops, etc. Anywhere you work that you get your hands dirty, our Hand Cleaner is the Best Solution for keeping your Hands Clean and Healthy.

Promise: Our Hand Cleaner will do three things:
1) It will Clean Better
2) It will leave Hands Nicer and Healthier
3) It will Save Money.

We are a small company that is currently looking to expand. As stated, it is a Time-Tested and Proven Product that will enable a good rep to establish dedicated customers that will order again and again. I have great margins on this product and for a rep who is currently calling on these type customers, this product can bring additional income without much work.
 
Company ID: 64161 - Click Here for Full Details
Product Lines:
Leader in Re-Manufactured AC and DC Electric Motors for All Material Handling Equipment and all Other Components for Mobile Equipment.

New AC and DC Electric Motors and all Components for Mobile Equipment including Lift Trucks, Agriculture, Construction, Airport, Minng and Steel Mill Equipment. 
 
Target Markets:
End Users and Dealers of: Lift Trucks, Mining Equipment, Construction Equipment, Agricultural Equipment, Ground Support Equipment, Utility Vehicles. 
 
Sales Opportunity:
Highest Commissions - above Industry Standards. 50 year Committment to the Mobile Equipment Industries. Only Material Handling AC and DC Electric Motor Re-Manufacturer with UL Recognition. Exclusive Schabmueller and Sauer Danfoss North American Representative.

Certified Re-Manufactured/Re-Engineer Center for:
Schabmueller
General Electric
Mitsubishi/Caterpillar
Clark
Linde
Unicarriers

In-House Machine Shop
In-House Rewinding

Quality Audits by:
Schabmueller
Mitsubishi/Caterpillar
Clark
 
Company ID: 115766 - Click Here for Full Details
Product Lines:
Highly-Engineered Industrial Finishing Equipment. 
 
Target Markets:
Automotive Parts Manufacturers, Food Preparation Businesses, OEM Manufacturing Businesses, Schools, Institutions, Hospitals, and Government Agencies. 
 
Sales Opportunity:
Opportunity to sell $5- $10 Million Sales Revenue Revenues Annually. Qualified Leads are furnished for Global Business Opportunities. Our Business is a very well known, Global. "Award-Winning" designer, manufacturer, and distributor of Capital Equipment with Plants in the US and China.
 
Company ID: 115761 - Click Here for Full Details
Product Lines:
We are a Canadian Solid Carbide Tooling Manufacturer with a Major Focus on Producing Application Specific Tools for Aerospace Parts, Power Generation Industries, and Hydraulic Manifolds.

Our Production Team can Produce Tools with Very Tight Tolerances including Radii and Angles. 
 
Target Markets:
Manufacturers of Aircraft Components, Power Generation Assemblies, High Volume Automobile Components, Valves, Manifolds, High Production Machining Facilities. Drilling Tools, Milling Tools, Thread Milling Tools, Port Tools, Round Form Tools, etc. Modified Standards also Manufactured. 
 
Sales Opportunity:
The person we seek is currently calling on the listed industries and has developed contacts in engineering or mid-management as the decision makers for purchasing tooling. Since the currency in Canada is 25% less than USA we should be competitive with US suppliers.

We would propose a sliding scale form of payment starting at 10% and dependent on sales volume rising from that point forward, this to be further discussed. The territory covered by the rep would be made exclusive to that individual. We are a 15 person shop with 8 CNC 5/6 axis machines all with robot loaders allowing us volume production of over 300 tools per day.
 
Company ID: 114201 - Click Here for Full Details
Product Lines:
We Produce: Unique Vacuum Stations, Unique Machines for Testing the Radial Clearance in Bearings, Unique Tribometer, Unique Pneumatic Clamps, and more.
We also Offer Custom Engineering Services. 
 
Target Markets:
OEM, Automotive, Aerospace/Aircraft, Industrial Distributors, Bearing Manufacturer, Research Laboratories, Universities, Medical and more. 
 
Sales Opportunity:
We are a diverse, fast growing, and high tech manufacturing company that produces our products from start to finish. Our products are unique and have no analogues in the world. These are expertly engineered products that have been manufactured to the highest standards. We can perform any custom order, from engineering design to production. We are looking for representatives that can cover North America territory and are willing to prioritize our products. Commission scale to be discussed personally.
 
Company ID: 111897 - Click Here for Full Details
Product Lines:
Tire Pressure Monitoring System (TPMS) & Relative Products 
 
Target Markets:
(1) Tire, Wheel Relative Businesses such as Tire Stores, Tire Chain Stores, Tire Distributors, Tire Wholesalers, Wheel Stores, Wheel Distributor/Wholesalers, Tire Supply Companies.
(2) Volkswagen, Audi Car Relative Businesses.
(3) Taxi Company Relative Companies. 
 
Sales Opportunity:
Our company is committed to providing unsurpassed quality in our product line as well as providing world class training for our customers. Since 2007 we have been in the forefront of the TPMS market as a leader in the industry. Our commitment to providing the highest technical advances in our sensor is one of the reasons that we stand out from other TPMS manufactures. This significant achievement not only shows that we have been qualified by the American Motors Industry but also has been Certified on the our Level by such manufactures as: Toyota, Mitsubishi, and Suzuki.

Our company also is the first to have 98% vehicle coverage as well as providing a sensor that does not require a vehicle relearn procedure. In 2015 we launched our latest product, we now have only 2 sensors in our product line that gives the ability to cover 98% of the vehicles. This second generation sensor still maintains all the protocols necessary to achieve 98% coverage as well as some new features. Commission rate started from 7% (Negotiable).
 
Company ID: 115733 - Click Here for Full Details
Product Lines:
Spill Proof Funnels. 
 
Target Markets:
It is a retail product: Hardware Stores, Automotive Stores, Chain Stores, Marine, RV. 
 
Sales Opportunity:
Ours is the world's only patented, spill proof, vented, controlled pour, flexible, long reach fluid pouring device. It's unique loop design seals to prevent spills and contamination. The universal adapter will fit to almost all standard plastic bottles ranging from 12 oz – 1 Gallon. We offer a competitive commission structure and have everything in place so you can start making sales.
 
Company ID: 115715 - Click Here for Full Details
Product Lines:
Prototype Tooling, Fixtures, Dies, and Assemblies. 
 
Target Markets:
Automotive, Aerospace, Medical, Tooling, Manufacturing, etc. 
 
Sales Opportunity:
We are a growing CNC Prototype job shop looking to expand into other markets and opportunities in order to do that we need an experienced sales rep. We'll design, create, or fix anything. Our only limitation is your imagination. Looking to fill a full time position with commission incentive, but are not against a head hunting situation.

Benefits Include:
- Full-time salary
- % based commission
- Fully paid for full insurance
- Matching 401K
- Paid sick, holiday, and vacation time
 
Company ID: 115694 - Click Here for Full Details
Product Lines:
Contract Manufacturing Services:
Precision Machining
Sheet Metal Fabrication
PCB Assembly
Electro-Mechanical Assembly 
 
Target Markets:
Any Company that is Producing a Product and may Need our Manufacturing Services. Executives, Engineers, and Procurement Personnel are the Typical Positions that would be Potential Decision Makers for Engaging with a Contract Manufacturer. 
 
Sales Opportunity:
Our company is one of the most vertically integrated contract manufacturers on the east coast. We have broad capabilities in the multiple manufacturing services we offer which are all under one roof in a 180,000 square foot facility that contains state of the art equipment in all facets of our business. You would not just be selling one service but four with some customers taking advantage of them all which reduces their vendor base and the cost of doing business.

We stand out from our competitors not only because of the array of services we specialize in but also because of our vast experience having been in operation since 1970. We are dedicated to quality and are ISO 9001:2015 and ISO 13845:2016 (medical products) Certified. Our reps are assigned a dedicated program manager to ensure we provide exceptional communication and support.
 
Company ID: 115670 - Click Here for Full Details
Product Lines:
Machined Parts, Fabricated Parts, Assembled Parts, Weld Fixtures, Robot End Effectors, Online Tooling, Offline Tooling, Turntables, Trunnions. 
 
Target Markets:
Automation Integrators
Machine Builders
Engineering Companies
Forging Companies
Metals Casting Companies 
 
Sales Opportunity:
Looking for motivitaded self-starters who can sell machined products, weldments, and assemblies to industrial and automotive consumers. We are a full service manufacturer offering CNC milling, turning, boring, paint, and assembly with inspection and certification.
 
Company ID: 115651 - Click Here for Full Details
Product Lines:
Precision Machining on Die Casting, Iron Casting, Steel, Forgings, and Metal Forming of All Types. 
 
Target Markets:
Manufacturers 
 
Sales Opportunity:
We are a fast growing business and have more than $3 million in production capability ready for you to represent and ready to invent new equipment as needed. We will have a US office work with you to let your job be as easy as possible.
 
Company ID: 115646 - Click Here for Full Details
Product Lines:
Poured Floors
European Cast Floors
Industrial Flooring
Epoxy Flooring
Self-Leveling 
 
Target Markets:
Architects
Designers
Specifiers
End-Users 
 
Sales Opportunity:
Flooring projects over 5,000 plus square feet. Can provide unique custom flooring solution to all types of locations. Will pay well for sold jobs and recurring work
 
Company ID: 115642 - Click Here for Full Details
Product Lines:
Special Tools for Carbide, PCD, Ceramic Inserts, Associated Products. European Subcontracter to International Cutting Tool Companies.

Quality Manufacturer Established 30 years ago. Manufacturer of Special Boring Bars, Turning Tools, Milling Cutters, Abaptors, Arbors, Line Boring Bars, Feedout Heads. 
 
Target Markets:
International Cutting Tool Companies, Automotive Engine Manufacturers, Automotive Brake Manufacturers, Automotive Component Manufacturers, OEM Machine Tool Builders, Oil & Gas Support Machining Industry. Any Machining Company. 
 
Sales Opportunity:
Special guys with vast knowledge of the products. Currently supplying European operations of the major International Tooling companies. Also a direct supplier to Ford Motor Company & Continental Teves Brakes. Currently have no representation in North America. Exciting opportunity to sell the manufacturing services of a very knowledgeable & experienced company who have a reputation for quality.
 
Company ID: 115640 - Click Here for Full Details
Product Lines:
Custom Gauges, Fixtures, and Machinery Replacement Parts.

Build to Print or Design and Build per Customer Specification. Would like to Target 50% Custom Build to Print - 50% MRO Replacement Parts. 
 
Target Markets:
Automotive, Appliance, Large Equipment Manufacturers. 
 
Sales Opportunity:
We are a small, family owned Tool & Die Company. We take great pride in standing behind what we build and doing it right the first time. We also have the capability to Design in 3D, as well as AutoCad. Due to our smaller size, we have the opportunity to adjust our production scheduling to meet the ever-changing needs of our customers. Our Tool Makers and Machinists are creative individuals, dedicated to producing quality work. We are not ISO certified as we are a tier two supplier. We do not build finished goods to be sold to the general public. Instead, we enjoy the position of being a valued Vendor to our Customer.
 
Company ID: 115637 - Click Here for Full Details
Product Lines:
Air Disc Pads, Rotors, Chambers, and Calipers for the Heavy-Duty Trucking and Transit Industry. 
 
Target Markets:
Distributors of Aftermarket OE Quality Truck Parts. 
 
Sales Opportunity:
Looking to expand on our current network of Distributors. Our patented product offers a unique selling proposition to a market that is growing astronomically in NA. Our Air Disc Brake product line is a complete package. Very few manufacturers offer a complete a package.
 
Company ID: 115630 - Click Here for Full Details
Product Lines:
Ours is an Injection Molding Company Offering Production, Assembly, Packaging, and Shipping.

Dosage Cups - Fifteen Sizes with Engraved or Printed Measurement Lines.
Hinged Boxes - Can be Decorated or Customized for Embossed Molded Copy.
Ampule Breakers - Vial and Closure Packages. 
 
Target Markets:
We are Looking to Branch into New Industries. We Welcome Entrepreneurs. We have the Ability to Manufacture so much more than we currently are. 
 
Sales Opportunity:
Our company is currently under new ownership. We are looking to reinvent ourselves and are looking for a strong sales force to work with our new marketing team. We will be using a new more modern approach to our manufacturing both through technology and marketing. Please submit a sales inquiry to us.
 
Company ID: 115616 - Click Here for Full Details
Product Lines:
Our Company Produces Custom Nameplates, Labels, Decals, Name Tags, Identification Tags, Metal Tags, Advertising Signage, Metallic and Non-Metallic Nameplates, Digital Nameplates, and Barcode Labels. 
 
Target Markets:
OEMs, Service Centers, Service Business with Product Identification. Our Products are Used for many Applications in a Wide Range of Industries. We have Products that meet a Variety of Needs and Accommodate all Types of Normal and Harsh Eenvironments. 
 
Sales Opportunity:
Our company is a premier manufacturer of quality identification products including custom decals, nameplates, and pressure sensitive labels. We have been providing products and services to industrial, commercial, and institutional clients for over 80 years. Founded in 1935, and located in Chicopee, Massachusetts, our company serves client locally in Western Massachusetts, regionally throughout New England, nationally across the United States, and worldwide.

We enjoy an excellent reputation in the product identification industry and can attribute our success and longevity to a significant focus on customer satisfaction. Our owners, management and employees are dedicated to exceeding customer expectations for quality, service, and product performance. We focus on your company’s overall needs and provide you with exceptional identification products and graphics. We maintain CSA, UL, and ISO 9001:2015 Certifications.
 
Company ID: 115355 - Click Here for Full Details
Product Lines:
Men's Clothing
Men's Accessories
Men's Shoes
Jewelry Men's and Women's
Electronics Supplies 
 
Target Markets:
Men and women of all ages 
 
Sales Opportunity:
Down to earth company that is expanding into more and more products at a competitive price, efficient, and rapid shipping services. We always make our customers and investors our main priority. Our dedication to assist you is the way we do things around here. Help forward, it's worth every second of accomplishments.
 
Company ID: 114990 - Click Here for Full Details
Product Lines:
Wire Harness Manufacturing
Generic and OEM Automotive Connectors 
 
Target Markets:
Automotive Aftermarket
Agricultural
Powersports 
 
Sales Opportunity:
We are a small wiring harness manufacturer with equipment that is efficient at high mix/low volume harness manufacturing. We would be a great addition if you already rep a larger manufacturer and need someplace to send smaller jobs they don't want! We have crimp force monitoring on our presses, all new equipment, and are willing to buy more equipment for specialty jobs. Additionally we already stock a lot of connectors used in powersports, automotive, and agricultural vehicles and have tooling for those connectors that we stock.
 
Company ID: 115502 - Click Here for Full Details
Product Lines:
Our Company has Teamed Up with Tool Shops & Part Manufacturers Across the Country Offering Robotics, Machining, Custom Machine Building, Automation, Jigs & Fixtures, Injection Molds, Stamping Dies, & Fabrication.

We have also Teamed Up with Injection Molders and Die Casters for Piece Parts. 
 
Target Markets:
Automotive, Window and Door, Tool, Mining, Aerospace, all Manufacturing, and more. 
 
Sales Opportunity:
Our company is hiring about 60 Independent Sales Representatives (for the United States regions) The sales rep. must have proven and current representation in the industrial manufacturing sector.
 
Company ID: 115462 - Click Here for Full Details
Product Lines:
Power Inverters, Battery Chargers, Powerpacks, UPSs, and Solar Products. 
 
Target Markets:
Retail Chains, Vehicle OEMs, Truckstops, Marine and RV Distributors, Alternative Energy Channels. 
 
Sales Opportunity:
Our company is a manufacturer of a full line of power electronics items in the growing areas of alternative energy and portable power. With a USA warehouse in Atlanta, Georgia and a very experienced team of salespeople and engineers, we can become a key product line immediately for the right representative organization.
 
Company ID: 115455 - Click Here for Full Details
Product Lines:
Our Company has a Revolutionary, Patented Line of Eco-Friendly Products that Restore Hygienic Cleanliness to Vehicles including Smoke, Cannabis, Bacteria, and more.

We Remove the Previous Owner from a Vehicle. Generate New Revenue/Margin, Sell Cars Faster, and Deliver a Better Car Buying Experience. 
 
Target Markets:
Auto Dealerships, Rental Car Agencies, RV Dealerships, Detailers, Carwashes, Marinas, Fleet Vehicles. 
 
Sales Opportunity:
Our products remove the previous owner from vehicles. It restores vehicle cabins to pinnacle hygienic cleanliness, removing odor and disinfecting. Our patented process does not cover up. It treats odor at the source. This revolutionary product can be implemented easily and at low cost throughout dealerships and creates New, Highly Profitable revenue streams for our them. We are greatly expanding in SoCal and other areas. This is a unique opportunity for reps to gain immediate traction and recurring income.
 
Company ID: 115443 - Click Here for Full Details
Product Lines:
Air Ride and Rubber Spring Suspension Systems for Medium Duty Racing, Horse, and Recreational Vehicle Trailers. 
 
Target Markets:
Trailer Manufacturers Throughout the US. 
 
Sales Opportunity:
We have a market established that we can pass on to get you started. We are looking for firms that already sell to the manufacturers of horse, race, and RV trailers. The opportunity will be best fulfilled by a rep firm that has engineering or technical backgrounds because this is a technical product that needs explaining.
 
Company ID: 115441 - Click Here for Full Details
Product Lines:
USA Manufacturer of Tire Pressure Monitor Caps.

Easily Check your Tire Pressure at a Glance without a Gauge. All Green: Go, Red Means Add AIR! These are Available for Specific Pressures from 26 to 165 PSI. 
 
Target Markets:
We are Looking for Reps for the Automotive Industry to Call on Utility Truck Companies, both Large and Small, Semi-Truck Companies, and Retail Yards. 
 
Sales Opportunity:
We offer the only tire pressure cap manufactured in the USA, We are looking for multi reps. We offer 20% commission. Our company is worldwide and well know to large phone companies and many trucking service companies.
 
Company ID: 115427 - Click Here for Full Details
Product Lines:
Automotive component, sub-assembly, vehicle structural test equipment:
-Servo hydraulic actuation
-Servo electric actuation
-Digital Servo Controllers 
 
Target Markets:
Automotive, Commercial Vehicle OEMs
Automotive Tier Suppliers
Independent Test Labs
Research Universities 
 
Sales Opportunity:
Our company is leading global manufacturer of high performance motion control solutions. Our Automotive Test solutions group develops innovative solutions to the structural durability test market supplying products and systems to the world's leading automotive OEM and tier suppliers. We are actively seeking Reps in the North America Test Market.
 
Company ID: 115364 - Click Here for Full Details
Product Lines:
"Build to Print" CNC Machined Components for Medical Equipment, Semiconductor Equipment Components, Jigs/Fixtures, Tooling Spares, or Ware Parts (Metal Stamping, Plastic Injection Molds, Components for Automation Equipment, and any Wareable Replacement Parts). 
 
Target Markets:
Manufacturers of Equipment, Automation, Automotive Production, Medical Equipment, Bearing Manufacturers, Aerospace Tier 1 and 2 Component Manufacturers, and any Customer Requiring "Build to Print" CNC Manufacturing with the Goal of Cost Savings but World Class Q!uality. 
 
Sales Opportunity:
This is a long term opportunity with reasonable commission to work for a known and proven manufacturer based on best cost region (Thailand). We are already exporting to USA, about 65% of our production.
 
Company ID: 113866 - Click Here for Full Details
Product Lines:
Advertising: Television Commercials, and Radio Commercials. 
 
Target Markets:
Companies that would like to Sell their Products and Services in the Cities that we Serve. 
 
Sales Opportunity:
The service (advertising) that we are interested in moving is very easy to sell because the shows that we're selling the advertising for are very popular. The area is very repressed when it comes to talent in the selling/marketing fields. The opportunities are limitless here for people who know how to sell products and services. Also, because of the area we are in, the price of the product is very inexpensive. This service can be sold for long periods of time. We offer 3 month to 24 month contracts and its easy to build up residual income from sales.

Reps will have the opportunity to earn from 20% to 40% commissions on the products they sell. The Radio show has been in existence for 10 years and is broadcasting in 5 different cities in Louisiana and Mississippi. The Television show is in it's 4th year of broadcasting and its on 2 television stations locally. It's on the FOX Affiliate and the ABC Affiliate and it has two different time slots in the morning.
 
Company ID: 115296 - Click Here for Full Details
Product Lines:
We are a Contract Sheet Metal Manufacturer with 40 Years in the Industry.

We also do Small to Medium Fabrication (up to Roughly 3,000# Assemblies). 
 
Target Markets:
Healthcare, Aerospace, Automotive, Household, Prototype Development, Research, and Development. 
 
Sales Opportunity:
We have lasers, forming machines, punching machines, limited machining, MIG, TIG, stick, robot welding capabilities, dedicated Quality Control personnel to ensure quality production. With our vast expertise and multiple engineers on staff, we have the machinery, the personnel and ability to create incredible sheet metal and fabricated products for the right price, on time, every time!
 
Company ID: 115257 - Click Here for Full Details
Product Lines:
Engineering Services: Mechanical Product Design, CAD Design Engineering Service, 3D Printing, Rapid Prototyping, Machining, CNC. 
 
Target Markets:
Manufacturing Companies that Need Additional, Temporary, or Expert Product Development Resources. 
 
Sales Opportunity:
You will be selling success! We assist our client develop new products that they will then manufacture themselves, or source to their own contract manufacturers. 10% commission, repeat business, complimentary sales if you are already selling products or services to small or mid-size product manufacturing companies.
 
Company ID: 115238 - Click Here for Full Details
Product Lines:
Commercial and Industrial Products, Mining Equipment, Construction, Agriculture. 
 
Target Markets:
Mining Production, Construction Supply, Commercial Industry Companies, Direct Hold Sale to Supply Warehouse. 
 
Sales Opportunity:
Direct sale to major company in Chile.

Chile is a flourishing center for innovation to a national initiative that supports and encourages foreign Manufacturers to enter their product as a start-up in Chile. Headquartered in the capital city of Santiago, this organization has brought some new businesses into the country every year and they have hosted countries, which altogether have a $1.4 billion portfolio valuation. The Chilean government hopes to retain these enterprises with the promised incentives of business-friendly regulations and tax laws (including a double-taxation avoidance agreement) and a low cost of living.
 
Company ID: 115225 - Click Here for Full Details
Product Lines:
High Speed Progressive Dies and Sub Components, Design and Build. 
 
Target Markets:
Automotive, Industrial, Mil Aero, Medical. 
 
Sales Opportunity:
High-end manufacturer with excellent reputation, good competency, and excellent quality. We have been in business since 1972. We have a tooling division that specializes the high speed dies running in the 20 to 90 tone range. We have experience in dies for electrical connectors, lead frames for electronic modules, and specialty components. We support prototype builds with bridge tools and have experience with many alloys.
 
Company ID: 113379 - Click Here for Full Details
Product Lines:
Wide Ranges of Industrial Waterproof Connectors for Transmission of Power, Signal, USB, RJ45, and Fiber Optic.

For indoor and outdoor applications. 
 
Target Markets:
All Types Manufacturers that Need Waterproof Industrial Connectors in their Products, Connection Systems, and Products. 
 
Sales Opportunity:
We have US headquarters with a top level manufacturer focus on industrial connector product design, manufacturing, and distributing.

We are providing to sales representatives an exceptional opportunity of:
1. Super fast growing market
2. Top level products
3. Super high commission
4. Customer and marketing protection

Our sales representatives only need to build the connection with potential customers, our team will do all following jobs including support, and warranty.
 
Company ID: 110904 - Click Here for Full Details
Product Lines:
Healthcare Services which are Provided by Phone or Secure Videoconferencing.

This Includes Providing 24x7 Access to Physicians that are Available to Write Prescriptions, Nurses who can Discuss Medication or Treatment Options and Counselors who can Address any other Concerns. 
 
Target Markets:
Every Organization can Benefit from having Healthier and Happier Employees/Members. The Spectrum of the Size of the Members/Employees of an Organization Vary from 5 to 5,000+. This means that you are Capable of Selling to almost any Business that is in your circle of influence. 
 
Sales Opportunity:
"No-Brainer" is typically the normal response received when talking about our services with a company.

How many businesses can you think of that could benefit from providing an "on-demand" healthcare solution that is always available? How many businesses can you think of that would enjoy providing Healthcare that is accessible from anywhere whether you are at home, at the office or on vacation?

Our services are perfect for small businesses to large enterprises. Our panel of Healthcare Providers are licensed, always available. You do not need an insurance license to sell our services and there are no limitations on your potential. We provide the training materials, resources as well as support. Commissions are 30%.
 
Company ID: 112706 - Click Here for Full Details
Product Lines:
Ours is an Industrial-Grade Odor Removal System that just Works.

No More Masking Odors, Pristine Eliminates them Biologically. If you Have an Odor Problem, Pristine is your Solution. 
 
Target Markets:
Auto Dealerships, Multi-Family Apartment Complexes, Marinas, RVs, Senior Living Facilities, Realtors, Fitness Centers etc. Also is a Great Opportunity to Create a Service Business that Compliments Your Product Sales. Extremely profitable, Training also provided. 
 
Sales Opportunity:
We have developed a unique odor product and system that removes odors permanently from Autos and all interior areas, residential, and commercial. We provide our representatives with free product samples, training, and territory protection. We will provide all marketing materials, business cards, and availability to all of our national accounts where we are already approved vendors (Auto Nation).

Our treatment system is ideal for developing a service business, and a retail business, all with the same product lines. Hotel, hands on training on us. We will assist you at trade shows with marketing materials, displays, and in person visits if needed.
 
Company ID: 115205 - Click Here for Full Details
Product Lines:
CNC Turning: up to 2 5/8" Diameter Bar & 8" Diameter Chucking
CNC Horizontal & Vertical Milling
CNC Swiss Screw Machine Products: up to 1" Diameter x 30" length.
Materials Machined: Stainless Steels, Aluminum, Brass, Steel, Beryllium Copper, Copper, Plastics, Monel, Copper-Nickel, Kovar. 
 
Target Markets:
OEM Manufacturers, Assemblies, and Machined Components: Industries Served include: Medical, Aerospace, Electrical Connector, Electronics, Precision Shaft, Valves & Fittings, Hermetically Sealed Connectors, Glass to Ceramic, and Plasma Torch Industries. Prototypes to Moderate Volume. 
 
Sales Opportunity:
CNC Turning/Milling & CNC Swiss Machining: ISO 9001:2015. OEM Manufacturers, assemblies & machined components. Current supplier to Aerospace, Medical, Firearms, Valves, Consumer Products, Connectors, Glass to Metal Seal & Aircraft Industries. Machining requirements include CNC Turned, CNC Milled and CNC Swiss Screw Machine products. Work closely with customer engineers.
 
Company ID: 115140 - Click Here for Full Details
Product Lines:
We are an Industry Leader in the Non-Metallic Industrial Enclosure Business.

We are an ISO-9001 Organization Offering over 1,000 Off the Shelf Sizes of Enclosures. These UL Listed Enclosures are Rugged, Dependable NEMA 4x, & NEMA 6P Rated. 
 
Target Markets:
Device Manufacturers, Equipment Manufactures, Panel Builders, Installation Companies including but not limited to the Renewable Energy, Water/Wastewater, Building/Factory Automation, Wireless, Special Automobile Industries. 
 
Sales Opportunity:
We produce the broadest range of standard plastic enclosures for the electrical and electronics industries. We focus on design and manufacturing of thermoplastic enclosures for use in hostile and hazardous environments. Our original company, pioneered in 1966 the injection molding of polycarbonate for use in the electrical industry. Our commitment to continuous product improvement and on-going product development has fueled the rapid growth of the company.

We have developed more than 17 product rangees, all available in numerous sizes. Since leaving the original group in 1991, we have greatly expanded manufacturing and added sales and marketing service centers. Currently there are six manufacturing sites: three in Finland, one in Germany, South Korea and the United States. Our company has 10 Service Centers located in Europe, plus the United States, China, and Korea. Throughout the rest of the world we have distributor partners to service the growing worldwide demand for our products.

As we continue moving forward, maintaining our technical leadership, we remain committed to understanding the needs of our customers. We use input from our ever-expanding global customer base to create new enclosure ranges, useful accessories, product improvements and new value adding services.
 
Company ID: 115137 - Click Here for Full Details
Product Lines:
We Offer a Wide Range of Laser Measuring Alignment Systems, Accessories, and Customized Solutions that will Solve Manufacturing Problems, Improve Manufacturing Efficiency, Reduce Downtime, and Increase Profitability. 
 
Target Markets:
Our Laser Measuring Equipment is Actively Used Across Industries such as: Aerospace, Military, Power Generation, Machine Shops, Paper and Textile Mills, Shipbuilding, Plastic and Film Production, as well as Electronic Assembly, to name a few. 
 
Sales Opportunity:
Our alignment products are specifically engineered to increase profits and reduce costly downtime for industrial manufacturers. The intelligent design efficiently eliminates misalignment issues, resulting in increased production quality and reduced scrap. Our products are easy to use, easy to learn and highly versatile. Portable and compact, this equipment can easily go wherever you need to use it.

We offer an extensive range of alignment accessories, providing ready made options for working with your particular needs. Proudly engineered and manufactured in the USA. All products made of solid, machined metal. Hand assembled and inspected for quality. Built to last years of industrial use. Legendary Support and Responsiveness.

On call Technical Support featuring engineers with over 100 years of combined experience, here to give you reliable advice and innovative solutions for your needs.For your convenience, many products are in-stock and can often ship in a day.Customization is a Pinpoint Specialty – unrivaled in the industry. Rely on a quick turnaround when you need repairs.
 
Company ID: 113449 - Click Here for Full Details
Product Lines:
A Professional High Quality German & American Line for the Automotive Industry, products as the Carbon Build-Up in Engines, Catalytic Converter Cleaner, Engine Flush, Oil Consumption Additive.

Solutions & Products for the Mechanic, Internal, & External. Gasoline & Diesel Engines. 
 
Target Markets:
Auto Parts Shops, Retailers, Big Chains, New Franchise Car Dealers, distributors. Products that Repair Shops use every day that generates more money to the business and benefit the customers. 
 
Sales Opportunity:
Professional cleaning, care, and sealing – that is what the product range of our company stands for. All articles have been developed specifically for the automobile trade and industry. Every day we try to improve our products and keep evolving to satisfy the growing demands and requirements of the national and international markets. So we can guarantee our customers the best results: Maximum efficacy and at the same time the protection of natural resources are our highest aims.

A clean affair for both sides. Because of our constant research we keep our recipes up to date, but we also test new biologically degradable substances and make them ready for the market. This way we can always satisfy the growing need of our customers and reduce the contamination of the environment.
 
Company ID: 115066 - Click Here for Full Details
Product Lines:
Digital Marketing Tools--Technology and Software Designed to Make SEO, Online Advertising, Local Geographic Advertising, Content Creation, and Content Management Simpler and Faster Through Well Designed Software. 
 
Target Markets:
Small to Medium Businesses. 
 
Sales Opportunity:
Earn residual income with our software subscriptions. Sell to small businesses that need help with promoting their business and generating leads. Easy sale because our software makes expensive marketing activity affordable to every business looking to compete in the cluttered online world.
 
Company ID: 114995 - Click Here for Full Details
Product Lines:
Ours is a Small Food Truck and Trailer, Home Based Manufacturing Business in Harlem, GA.

We Build Top Quality, Durable, Beautiful Food Trucks and Trailers that are Peerless to our Competition. 
 
Target Markets:
Our most Successful Food Truck Reps are Friendly, Outgoing, Persistent, and Enjoy the Process of Generating Leads Using Inbound Marketing Techniques. Calling on Retirees, Restaurant Business Owners, Caterers, Chef, Event Runners, Schools, or anyone who would have a need for our product. 
 
Sales Opportunity:
Full time sales reps average a return of 5% (trucks) to 7% (trailers) over the course of the year, so there is always a change of scenery around the corner. Commission income for full time reps ranges from $25,000 to $50,000 depending on work habits, time invested, closing rates and tenure with the company.

You will be responsible for garnering the material straight from our website, marketing the product with your contact information, providing professional customer service to your customers, and closing the deal. You would be the liaison between us and your customer. We would only deal with you. The ability to market online and offline effectively, and close high end deals is essential to a successful run with our business!
 
Company ID: 112605 - Click Here for Full Details
Product Lines:
Home Garage Storage System: A Unique Way to Create Extra Storage in your Garage. 
 
Target Markets:
Retail: Home Storage: Any retail outlet that offers home storage ideas.
Hardware Stores (Ace), Auto chains (Autozone), Sports outlets (Acadamy) 
 
Sales Opportunity:
Garage Storage System for Homeowners is a great opportunity to introduce a unique patent pending idea. HSN just order 1,200 units. It's simple but useful. Our customers love it. Our company is growing and we satisfy large purchase orders. We compete with other storage ideas from the perspective that this is inexpensive, easy to install and cool. Our company is open to your expertise and will help you any way we can. Our commission structure is fair so we both benefit.
 
Company ID: 114998 - Click Here for Full Details
Product Lines:
Lighting Inverter
High DC Voltage Inverter
UPSs
Frequency Converters 
 
Target Markets:
Contractors, Distributors, End-Users, Specifers, Transportation, Transit Authorities. 
 
Sales Opportunity:
Sales through independent reps only, high commissions. Or buy/resale. We are an American manufacturer for 20 years. Approved by Chicago transit authority. For 3rd rail inverter, only American company approved.
 
Company ID: 114997 - Click Here for Full Details
Product Lines:
Automotive, Trucking, Heavy Equipment for the North/South Dakota, Wyoming, and Montana Market. 
 
Target Markets:
Diesel Repair Shops, Military, Trucking Companines, Truck Dealerships, Transportation, School Bus Lines,etc. 
 
Sales Opportunity:
Great product line with great potential. Automotive experience helpful but not mandatory. Equipment service potential for all new and existing customer base.
 
Company ID: 114963 - Click Here for Full Details
Product Lines:
Customized Automated Test Equipment ATE 
 
Target Markets:
Military, Aerospace, Medical/Bio-Med, Telecomm, Automotive, OEM/Commercial, and many others. 
 
Sales Opportunity:
Our company is a specialized Engineering Design/Build firm, Advanced Software Developer, and integrated functional Automated Test Equipment (ATE), Manufacturer. Our unique blend of talented engineers are able to provide more than a typical solution for when the production engineer needs a more adaptable solution than what a typical instrument can provide. Our goal from the start was to provide automated test systems and flexible ATE systems for power supplies, making us the first commercial manufacturer of Automated Power Supply Test Equipment globally.

We have expanded our product line to include a full series of products from desktop units to full-featured and integrated rack mounted solutions. As a company, we have invested in people, design and support that help us achieve customer satisfaction and nurture long-term client relationships. Commission structure 10%. Engineer support, we will go with you on sales calls if needed.
 
Company ID: 114970 - Click Here for Full Details
Product Lines:
Concrete Mixer Truck Parts
Batch Plant Parts
Concrete Chemicals
Cleaning Supplies
Surface Prep
Filters
Hydraulic Components

Mixer Refurbish/Recondition
Ladder-Less Washout System
Mixer Repair
Blast/Paint
Drum Change
Roller Change
Parts Replacement
Gearbox Repair
Hydraulic Repair 
 
Target Markets:
Ready Mix Concrete Companies
Concrete Contractors
Concrete Batch Plants
General Contractors 
 
Sales Opportunity:
This is a very niche market that we are competing. I am looking for someone that has good introductory and follow-up skills. Not necessary to have experience within the industry, only excellent sales skills with closing experience. We have knowledge and experience in the industry and are looking for someone that can help grow the business.

We have contacts identified, the right person that is motivated can make their name quickly without doing a bunch of legwork. Get us in the door and we can grow quickly. We believe in relationships and taking care of our team in all aspects. This is a ludicrous opportunity with potential monthly sales of $700,000+. We have everything in place operationally, training, marketing, website, and relationships we just need this key component for quick growth.

Our mission and purpose:
* From diagnostic evaluations, parts, reconditioning, repairs, blasting, painting, and everything in between, our experienced staff can help provide the solutions to keep your concrete operations and truck fleet in top functioning condition.
* Our mission is to provide our customers a one stop solution, providing timely, quality and cost effective solutions for all of their repair parts and service needs.
 
Company ID: 114960 - Click Here for Full Details
Product Lines:
Zinc die castings with buffing plating and minor assembly capability 
 
Target Markets:
Major plumbing, motorcycle, and hardware manufacturers 
 
Sales Opportunity:
Our company has been in business since 1947 and is vertically integrated manufacturer of zinc die casting's, polishing and decorative plating
 
Company ID: 114936 - Click Here for Full Details
Product Lines:
- Low Power DCDC Converters (0.5W - 40W)
- AC/DC Power Solutions - We are Developing a New Range.
- LED Lighting Solutions - Drivers for Philips and Omron, High Bay Lighting Solutions
- Batteries - Alkaline (AA, AAA, 9V etc.), Button Cell, Lithium, Rechargeables, etc. 
 
Target Markets:
Industrial, Medical, Security, Consumer, Lighting. 
 
Sales Opportunity:
We are a young dynamic company who design and manufacturer power supplies. We are open to ideas that benefit both sides. We are hungry to grow and to grow quick. Our industry is in a state of growth and we need focused, driven sales people who can help us achieve this.

There are big rewards on the back of our growth. We have struggled in the past locating good knowledgeable sales staff to grow our business and we are looking forward to welcoming a new team. The products we manufacturer are all compatible with existing products in the market and we can help with cost reductions or simply new designs. We look forward to working you.
 
Company ID: 114896 - Click Here for Full Details
Product Lines:
New and Remanufactured Turnkey Broaching Systems
Used Broaching Machines
Broach Tools and Broach Tool Sharpening Services
Broaching Machine Replacement Parts and In-Field Service and Repair
Production Broaching Services 
 
Target Markets:
Automotive Supply Chains (1st Tier and Below)
Agricultural Equipment Manufacturers (John Deere, etc. and the Supply Base)
Parts Suppliers to the Heavy Truck Manufacturers Industry
Small Arms Manufacturers
Hand Tool Manufacturers 
 
Sales Opportunity:
Our company offers broaching solutions tailored to meet every budget. Customers can choose a new machine utilizing the latest electric drive technology or remanufactured machines from our inventory of over 350 used broaching machines. If the production requirements don't justify the cost of buying a broaching machine, We can broach parts for them on a contract basis.

We offer spare parts to support nearly every broaching machine built in the USA since the 1940's and has the expertise to offer in-field service and repair of these older machines as well. Our company also designs and build broach cutting tools of all types and offers sharpening and reconditioning service on all types of broach tools. We are an American owned company since 1946.
 
Company ID: 99524 - Click Here for Full Details
Product Lines:
Custom Engineered Shock and Vibration Solutions as well as Rate Controls, Force Controls, and Custom Dampers.

We have a Standard Line of Shock Absorbers in Stainless Steel, Carbon Steel/Black Oxide, and Composite. We can Handle Sizes from 1/8 dia to 20 inches Diameter Products. 
 
Target Markets:
Commercial Aviation
Defense
Industrial Machinery Designers and Builders
Oil and Gas Industries
Medical
Food Processing 
 
Sales Opportunity:
We have over 150 years experience developing products for the target markets listed. We have many patents and can supply low volume and high volume applications. We have hydraulic products, elastomeric solutions, and wire rope isolators. We have low and higher cost solutions and have substitute product for all the major competitors like ITT Enidine, Ace Controls, Enertec, etc. Please take a look at us and we can solve any shock, vibration, or actuation problem.
 
Company ID: 114879 - Click Here for Full Details
Product Lines:
Our Company Manufactures Cutting-Edge Retail Displays Using World Class Design, Engineering, and Production Capabilities Here and Abroad in China. 
 
Target Markets:
Consumer Retail Products, Various Marketplaces, and Product Types. 
 
Sales Opportunity:
Our company manufactures cutting-edge retail displays using world-class design, engineering, and production capabilities here and abroad in China. We thrive in the most complex and challenging projects. For over 35 years, our principals have been designing, manufacturing, and consulting clients to deliver maximum impact and ROI.

Some key in-house points of difference are:
• Consumer Lab – shopper insights & trends to assist in qualitative & quantitative design proposals
• Tech Lab – hardware, systems, software, electrical engineer
• Design (3D and graphic), engineering, prototyping/model-shop
• Factory direct domestic and global manufacturing
• Mass Assembly
• Compliance Team – logistics, online (real time) inventory management/tracking portal, installation, key metrics and trends analysis

We are an innovator of retail displays with domestic and overseas manufacturing capabilities. Simply put, we create and produce in-store experiences. Through the development of custom displays, using digital engagement and the latest technologies/materials, we help our clients provide consumers with optimal engagement and education. I’m confident that we can be a long-term partner for you.
 
Company ID: 98659 - Click Here for Full Details
Product Lines:
Our Company Offers Vertically Integrated Manufacturing Services/Solutions.

Core Competency includes, Cable Assemblies/Wire Harnesses, Bulk Wire & Cable, Connectors, Printed Circuit Board Assemblies, Full Turnkey HLA/Box Build Services. 
 
Target Markets:
OEMs for Medical Devices, Automotive, Industrial (Automation), Transportation, Communications, & Consumer. 
 
Sales Opportunity:
44 years in business, Financially solid, 7 global locations, including 5 manufacturing facilities, all in low cost regions. Customer service & stocking warehouse in the USA. Hybrid path to market (Regional Direct plus MREPs), Competitive Commission structure, Incentive plans available.
 
Company ID: 112386 - Click Here for Full Details
Product Lines:
High Pressure (10,000 psi, 700 bar) Hydraulic Pumps, Tools and Cylinders, Mobile Hydraulic Cylinders (2500 to 3000 psi) up to 6" Bore and 48" Stroke.

Our Products are Used in a Variety of End Markets: MRO, Construction, Automotive, Oil & Gas. 
 
Target Markets:
Targeting Industrial Distributors and Original Equipment Manufacturers (OEMs). Business Model is Very Attractive to Hydraulic Repair Facilities and Fluid Power Specialists. 
 
Sales Opportunity:
Do you want to be part of a 17 year old start-up? Yes, you heard that right! We have been around awhile with seasoned professionals, but we continue to act and grow like a start-up. Our business has grown over 50% per year over the past two years! This is a great opportunity to sell a high end brand in a niche market. We have been selling our products since 2001 to well known brands in the industry. We are now going direct to the market with our own high quality/high value brand.

A great opportunity to sell high quality products at a value price. This product line continues to expand. We have added over 100 SKUs this past year and will continue to add products in the future. It is very rare to have a new competitor enter into this space. What a great opportunity to represent the game changer! This is a Great Opportunity for a Manufacturers Representative who Carries Complimentary Lines.
 
Company ID: 114826 - Click Here for Full Details
Product Lines:
EP-2 Grease: Built with our Proprietary Metal Bonding Technology is 50 Times more Powerful than most Greases.
Penetrating Spray: 50 Times more Powerful than Spray Lubricants.
Heavy Duty Oil Stabilizer: 50 to 80% Wear Metal Reduction in Engines. 
 
Target Markets:
Drilling, Mining, Automotive, Diesel, Agriculture, Machining, Fabrication, Manufacturing, Railway, Racing, Elevator Repair, Construction, Marine. 
 
Sales Opportunity:
Our company establishes trust with your customers by maximizing results and profitability in savings thousands and preventing equipment failure. Our products have been tested over the past 10 years with a number of ASTM certified testing methods, by independent laboratories and by our customers.

They work immediately upon application and results are guaranteed. We do business with some of the largest companies in the world including Ford, Shell, Aramco, Nucor Steel and even NASA. So we are confident that our products work extremely well and pass every requirement for equipment.

The highlights:
• $2.5 million in laboratory and field testing.
• Products used by 100’s of top U.S. companies such as Baker Hughes, Halliburton, Schlumberger, Ford, GM, as well as military agencies including NASA.
• Experienced management team with decades of experience with patented lubrication technology.
• Decimate any lubricant formulation using zinc, PTFE, moly’s or Company Profile’s.
 
Company ID: 114687 - Click Here for Full Details
Product Lines:
Modular Fire Barriers, Separation barriers, Transformer Fire Barriers, Substations, Vault Protection, Ballistic Walls, Ballistic Fire Barriers, Jet Fire Barriers, Explosion Barriers, Solutions and Consulting, Fireproofing, Fire Protection, Cable Wrapping, Intumescent Products, Basalt Products. 
 
Target Markets:
Utilities, Energy Storage, Power Generation, Critical Infrastructure, Security, Safety, and Fire, Asset and Insurance, Transformer manufacturers, Nuclear Facilities, Dams and Waterways, Ports and Cargo, Airports, Rail, Marine. 
 
Sales Opportunity:
Join the industry leader in innovation and design of fire barriers and enhanced fire barriers for infrastructure protection. We deliver fire barrier solutions nationally and provide turn key assessment, design, fabrication and installation. We customized our listed and rated materials to fabricate barriers, boxes, wall modules, vaults, separations and all types of rated assemblies.

Fire, ballistic, blast, IED, heat, wind load, radiation, blast, noise and jet fire enhancements in a modular, cost effective design! Sell value - not price to large and small clients, utilities, contractors and with Sinisi, Always be Closing for Big commissions!
 
Company ID: 114799 - Click Here for Full Details
Product Lines:
Recycling and Waste Material Management Programs that Increase our Clients' Commodity Revenues, Reduce Waste Expenses, and Improve their Environmental Footprint.

Additional Facility Management Service Lines such as HVAC, Landscaping, Electrical, Plumbing, and Pest Control are also Available. 
 
Target Markets:
Mid-Market Generators of Recycling and Waste Materials. Target markets may include but not be limited to: Retail, Manufacturing, Restaurants, Hospitality, Logistics/Distribution, Property Management, and Healthcare. 
 
Sales Opportunity:
Waste material management services are often an overlooked expense. So as long as no one is complaining, it is out of mind. That's where we shine! We provide service programs that guarantee rebate/cost improvements while also providing them: a single point of contact for all recycling and waste related services, consolidated payments and/or invoices that have been thoroughly audited by our team, cost containment over the term of the agreement, management of all waste related temporary projects, and detailed monthly reporting. Reps will be supported by an experienced Business Development team. Compensation is 100% commission, based on margin and contract factors.
 
Company ID: 114773 - Click Here for Full Details
Product Lines:
Casters and wheels for the Industrial, foodservice, AGV and medical Industries. 
 
Target Markets:
B2B. OEMs and design engineers, Material Handling, foodservice and medical companies to name a few. 
 
Sales Opportunity:
Great opportunity. Modest Base and no cap on commissions. We currently supply many fortune 1000 companies across the US. We have solid financials and US office in High Point, NC.
 
Company ID: 114730 - Click Here for Full Details
Product Lines:
Architectural Finished and Unfinished Wood Veneer Wall Panels
Architectural - Commercial Millwork Components
Flexible Veneer Sheets - Finished and Unfinished
Finished Decorative - Exotic Veneered Laminate Sheet
Wrapped Moldings, Trim, and Veneer Edge Banding
Solid Trim Profiles 
 
Target Markets:
Store Fixture Manufacturers
Commercial Architectural Millwork Fabricators
Contract Furniture Manufacturers
Aircraft Interior Fabricators
Boat/Marine Industry
High End Residential Millwork
Ceiling and Flooring Manufacturers 
 
Sales Opportunity:
Located in Delray Beach, our company has been in business for over 30 years. The majority of our work is installed in Boat/Marine Industry for Yachts worth over $10M dollars. The level of quality of the work we perform for this industry is above acceptance for standard AWI guidelines. We are looking to partner with a firm that calls on above target markets and can work with designers and architects on all projects.

We can manufacture with highest quality any veneer species on any substrate, with any matching specifications and supply with any finish through our four (4) high press lines and two (2) flat line UV curing finishing process. Negotiable commission structure can be established and we will provide all sales tools and training. Opportunity is State of Texas and surrounding region.
 
Company ID: 114726 - Click Here for Full Details
Product Lines:
Powersports: Mini Bikes, Go-Karts, Electric Bikes, Scooters, Riding Toys. 
 
Target Markets:
Independent Power Sports Dealers/Retailers. 
 
Sales Opportunity:
Ability to sell the nations top manufacturer of mini-bikes and go-karts. Expanding product line in 2019 and 2020. Brand awareness is growing rapidly and will continue to grow nationally and internationally. Ability to sell parts, accessories, and services.
 
Company ID: 114074 - Click Here for Full Details
Product Lines:
We Typically Assess Products.

RoHS, REACH, WEEE, Conflict Minerals, or Prop. 65 are Examples of Environmental Product Compliance Requirements. Offered Services include anything from Customized Training to Full Support of Environmental Compliance Requirements. 
 
Target Markets:
Our company Serves Customers all over the USA and Canada, mainly Manufacturers of Electronic Devices (Consumer and Professional). We also work with EMC and Safety Labs. 
 
Sales Opportunity:
This is a unique opportunity to make easy sales because:
- There are few actors in this niche market. There you won't have much competition
- Our pricing are lower to the competitors
- Our reputation is strong particularly among well established worldwide labs
- The demand of product environmental compliance is constantly growing
- We will provide as much support as necessary
- We are open to discuss Commission
 
Company ID: 61384 - Click Here for Full Details
Product Lines:
Beauty Supply, Health, Fitness, Skincare, Fashion Compression Socks, and Stress Relief Products.

All National Brands Tailored for Stylists, Designers, Cosmeticians, and Medical Staff on Their Feet All Day. 
 
Target Markets:
Beauty Supply Distributors, Fitness Suppliers, Restaurant Suppliers, Healthcare Distributors. 
 
Sales Opportunity:
Opportunity to add major brands to your portfolio of salon, workplace, healthcare products that provide comfort, safety, support and daily fatigue. Excellent commission, protected territory, exceptional sales, and marketing material, samples.
 
Company ID: 114692 - Click Here for Full Details
Product Lines:
Our DSFB (Distributed Sensing Flashing Beacon) Used as a Flashing Beacon for Pedestrian Crosswalks with a Wireless Sensor to Activate the System when a Pedestrian Enters the Crosswalk.

Used as a Traffic Warning Light in Roadways for Dangerous or Hazardous Conditions or Intersection Warning. 
 
Target Markets:
Municipalities, County Highway Departments, Department of Public Works, Police Departments, Parking Lots, Schools, Colleges, Universities, Hospitals, Airports, Shopping Centers, Apartment Complexes, Developers, and whom ever you think of. 
 
Sales Opportunity:
Great Rep Support & Great Customer Support. Literature Provided & Monthly news letters to your customer base to keep our name in front of them, showing new applications. Always looking for ideas. Repeat business, Territory & Customer Protection. 12% commission. We drop ship and do all the billing.
 
Company ID: 114683 - Click Here for Full Details
Product Lines:
CAN/LIN Network Controllers, Gateways, etc.

World's Only ISO280-Pluggable CAN Controllers and Solid State Relays
Display Products for Vehicle Accessories or Control
Telematics- Satellite, 3G/4G, Bluetooth
Cloud-Based Fleet Management - Full Service Connectivity 
 
Target Markets:
Specialty Vehicle Manufacturers of All Kinds. Current Customers include: Electric Vehicles, Off-Road, Marine, OTR Trucking, Vocational Trucks, Agriculture, etc. 
 
Sales Opportunity:
We offer full training, technical support and an established product line from our offices in Dayton, OH. Our manufacturing facility is IATF16949 and ISO9000-2015 Certified. Located in Germany, we are a Tier-1 automotive supplier, from which we derive an entire catalog of CAN-based products used internationally and across too many industry segments to list. We are looking for Specialty Vehicle market specialists. If you are actively involved in this industry and can substantiate growth potential we can offer long-term commission protection and amazing customer support.
 
Company ID: 111923 - Click Here for Full Details
Product Lines:
Metal Fabrication
CNC Machining
Casting (4 types)
Plastic Injection Molding 
 
Target Markets:
Companies/Manufacturers that Outsource Above Projects Dealing in Large Quantities such as Container Loads. We have a Broad Base of Customers and Products Produced. 
 
Sales Opportunity:
Working with us means:
Local support
US Based Company in Newark, CA
Direct contact with manufacturing facility
High quality products/Competitive pricing
Open door policy to the end-users/team players
ISO 9001-2015 plant certification
5% commission
 
Company ID: 112450 - Click Here for Full Details
Product Lines:
Electronic Contract Manufacturer Providing a Full Range of Expert Printed Circuit Board Manufacturing & Assembly Services, Cable Assembly, Box Assembly for Electronic Products.

Our Company is an AS9100 & ITAR Certified Company. We can do Proto to Full Production to Full Turnkey Solution. 
 
Target Markets:
Aerospace & Defense Industries, OEMs, Medical Device Manufacturing, Automobile Industries, Optoelectronics Motion Control, Lighting Industries, Robotics, Automation, Lab Equipment. Wherever Electronics PCBs are Used, we can Sell our Services. 
 
Sales Opportunity:
Electronics is a huge industry, Aerospace, Defense, and medical Equipment. Manufacturers outsource millions of dollars to contract and ongoing repeat orders. We pay 3-5% commission based on contract size. We help to attend trade shows and if required advance technology equipment. We will update our manufacturing with technology and market requirements. We have automatic SMT line that's capable to manufacture and do any High Technology Electronics Products.
 
Company ID: 8239 - Click Here for Full Details
Product Lines:
We Provide a "Feeless" Franchise Type Opportunity marketing a Unique Cash Flow Improvement Service that our Clients Use to Increase their Cash Flow, Reduce Billing Costs, Lower Days Receivables, Eliminate Collection Agency Costs, Reduce Overhead Related to Receivable While Reducing Office Stress. 
 
Target Markets:
Our Service is Needed by Over 90% of Businesses in Over 80 Different Industries including Professional, Wholesale, Commercial, Retail, Service, and the Multi-Billion Dollar Healthcare Industry including Medical and Dental Services. Professional Business Associations are also clients. 
 
Sales Opportunity:
Utilize your B2B sales and/or business consulting experience to earn a six-figure residual income marketing our distinctive service. Seeking individuals with B2B sales and/or consulting experience with a business mentality and excellent communication skills to call on company owners, presidents, and chief financial officers and offer our unique cash flow improving business service.

- Proven, needed business service
- Stable company
- Unlimited six-figure income potential
- Initial and two ongoing residual earnings
- High referral sales factor
- No territory restrictions
- Protected accounts
- Recession proof industry
- Company backup and support
- Professional customer service and support for clients
- Excellent Initial and ongoing training and support
- Unlimited prospect base
- No nights, travel or week-ends
- Hassle free transactions - no turn-downs, qualifying, or credit checks
 
Company ID: 114603 - Click Here for Full Details
Product Lines:
Grease, Gear Oil, Hydraulic Oil, Engine Oil, Transmission Oil, Compressor Oil, R&O Turbine Oil, Aerosol Spray Lubricants, Food Grade, Biodegradable Hydraulic Oil, Chain Lubricant, Wirerope Lubricant, Flush Oils, Hydraulic Oil Boost, Gas-Diesel-&-Engine Oil Improvers. 
 
Target Markets:
Any Industrial Company that wants High Quality, Long Drain Cycles, that run cooler, Leak Less, Separate from Water Better, Reduce Fuel & Power Consumption and that extend Equipment Life and Maintenance Cost. 
 
Sales Opportunity:
Our company has been in business manufacturing High Quality Lubricants since 1933. There is good reason why - we are the only Lubricants Manufacturer named "Energy Star Partner" by the - U.S. DOE & EPA. Our Lubricants reduce your overall Lubricants cost. Let us consult with you to show you the details of what we offer and why you want to be using our Lubricants.
 
Company ID: 114545 - Click Here for Full Details
Product Lines:
Over the Past 3 years we have Created and Enabled the Delivery of Turnkey, Health Protection Programs for the Confined Spaces in which we Live, Work, and Travel.

Starting with the Transportation (Personal, Recreational, Commercial, and Public) Market in the US and Canada. 
 
Target Markets:
Through your Passion for Health Protection, you will Prospect, Qualify, and Close General Managers and their Teams, Fleet Managers, Occupational Health and Safety Managers, and Asset/Risk Managers thereby Building our Clientele in your Territory. 
 
Sales Opportunity:
What Your Day to Day Will Look Like:
- Generate qualified leads with key decision makers using our unique value propositions.
- Coordinate sales activities with our marketing campaigns.
- Deliver onsite and online sales presentations to user, technical and economic buyers.
- Progress the sale thru the buyer types and close with the key decision maker.
- Generate a minimum of 2 deals per month (following onboarding period).
- Train and nurture new clients through our turnkey, onboarding program.
- Maintain client knowledge via regular updates on sales funnel status and client success.
- At all times deliver an exceptional client experience.

What Skills You Will Possess:
- 3+ years of successful, complex-sales experience.
- Proven ability to navigate and close a complex sales cycle.
- Proven ability to deliver an exceptional client experience.
- Previous experience with a CRM is an asset.
- Ability to commute/travel to client locations in your territory.

Why You Should Apply:
Emerging, untapped market: As a forward-thinking company, our company is creating and investing in health protection programs that will have long term benefits both for consumers and our service providers. The timing is perfect. A Significant Upside, there is nothing commercially available that rivals the broad effectiveness and safety of our programs. As a result, your territory is Untouched! The opportunity to close deals and build relationships is Significant!
 
Company ID: 98698 - Click Here for Full Details
Product Lines:
Ceramic Fiber Products: Boards, Gaskets, Modules, Custom Vacuum Formed Shapes, Textiles. High Temperature Putty, Adhesives, Moldable Ceramic, Refractory Precast Shapes. 
 
Target Markets:
Steel Fabricators, Industrial Furnace Builders, Primary Steel Making, Casting and Forging Foundries. Petrochemical Plants, Heat Treaters, Investment Casting, Incineration, Boiler Manufacturers. 
 
Sales Opportunity:
With the weakness of the Canadian Dollar, our pricing, in US Funds, is very competitive. We manufacture custom refractory products that are in most cases repeat business. OEM's give us specs and drawings and we help engineer a solution for their high temperature applications.

We currently offer the industries fastest turnaround with ceramic fiber vacuum formed shapes. We have inside sales support with engineering and cad support. Average transaction is $2,500 and as high as $80,000. 99% of our customers are repeat business (within 12 months) with many consumable product sales, some customers ship weekly.
 
Company ID: 114529 - Click Here for Full Details
Product Lines:
Currently Fabrication Catwalks, Platforms, Ladders, Miscellaneous Repair, and Fabrication of Sand Plant Items.

Looking to Expand into Other Markets and Possibly Set-up Shop for Producing for Overseas Companies. Interested in Any Type of Fabrication Needs. 
 
Target Markets:
Aircraft Companies for things like Scaffolding, Carts, & Shipping Containers. Oilfied for any Steel, or Stainless Steel Weldments. Conveyors, Airport Moving Systems, Jet Way Bridges. Any Customers having Fabrication Needs. Production or Single Items. 
 
Sales Opportunity:
We are a new company in central Texas looking to expand our roll in fabricating. We are a women owned company and have a HUB designated number. We have a shop that is 16,000 sq. ft. with two 10 ton overhead cranes with 22' hook height. We are supported with burn tables, rolls, brakes, mills, lathes, all different types of welding machines for aluminum and different steels.
 
Company ID: 114388 - Click Here for Full Details
Product Lines:
- Customization of Reports and Applications on Oracle JD Edwards Enterprise One ERP platform.
- Custom Software Development (Web Apps and Mobile Apps).
- A Budgeting, Planning and Forescasting Software Solution as SAAS or on Premise.
- Predictive and forecasting models with econometric and ML. 
 
Target Markets:
SMB Industries of the following Verticals: Retail, Manufacturing, Services, Pharmaceutics, Oil and Gas, Restaurants, Textile, Consumer Products, etc. The target market will be Small and Médium Size Industries, Selling to B2C and B2B. 
 
Sales Opportunity:
Ours is a 100% Ecuadorian company specialized in providing custom software development services. We deliver high technology business solutions that contribute to the improvement of processes, increasing the productivity of our customers. Our budgeting and planning software uses artificial intelligence in order to forecast sales, credit demand, etc.

We offer a commission based on deals closed. We want to have interested and ambitious people. We are looking for an independent sales professional based on commision only. We are a company that always is innovating and developing new products and technology.
 
Company ID: 114454 - Click Here for Full Details
Product Lines:
Cutting Edge Niche Greater Houston Community Sports Magazine Seeking Assertive Sales Rep(s) to Lead Charge in Ad Sales & Securing Title-Sponsorship.

Now in our 8th year of Publishing, we Boast Primary Coverage of the Metro's College, Pro, Olympic, and Service Academy Athletes Competing Nationwide. 
 
Target Markets:
Greater Houston and surrounding Metros going as far east as The Golden Triangle (Beaumont, Orange, Port Arthur), north to Lufkin, south to Galveston and west to Sealy, TX. 
 
Sales Opportunity:
Seeking energetic, reliable rep(s) willing to work connects through the Greater Houston Metro for Commission-Based positions. Willing to negotiate for competitive, generous slices of Ad Sales/Sponsorship. What we need is someone who believes in our mission both in scope and financially.

Willing to collaborate and make suggestions to help grow our brand to something we plan to expand to doing magazine versions for Greater Dallas and San Antonio Metros are part of our long-term vision. Our business model is already in practice with successful financial results for a rival competitor superior in connections only. Ready to Get to work? Hit me up for more details.
 
Company ID: 114448 - Click Here for Full Details
Product Lines:
Ball Valves, Gate Valves, Butterfly Valves, Check Valves, Choke Valves, Wellhead, & X-mas Tree. 
 
Target Markets:
Our Products are Widely Used in Natural Gas, Oil, City Heat Supplying Fields, especially Applied to Natural Gas and Oil Long Distance Pipeline, Tank Field Pipe Network (including Wharf, Airport, Oil Depot, Oil Tankers, Oil Station)s, etc. 
 
Sales Opportunity:
We have introduced world level technology and management processes to produce the international advanced grade of fully welded pipeline ball valve, flat gate valve, valve actuator, and other high-tech products.
 
Company ID: 114445 - Click Here for Full Details
Product Lines:
Ours are Id Shield Identity Theft Plans and Small Business Plans.

Our Customers can Literally Run their Personal Needs right from the Palm of their Hands. Our Customers can Purchase just One or All Three of them. 
 
Target Markets:
Our Reps Sell to Individuals, Families, Small Business Owners, and to their Employees. Our Customer Base is every American and Canadian Citizen, and Small Business Owner. Open Territory 
 
Sales Opportunity:
Mass Market Appeal, it creates short-term and long-term income, up to 65% commission, simple sales process, management overrides, unlimited growth potential,Freedom and Flexibility,Tax Advantages, Training, and Support. We have been around for 46 years was on NYSE (pre-paid legal) until 2011 at which time we were bought out by a private equity firm known as mid-ocean partners for $650 Million and rebranded to a different name.

One of North America’s leading providers of affordable legal plans and an Id Shield identity theft solution for individuals, families and small businesses, is proud to report that the company was certified as a great workplace by the independent analysts at Great Place to Work®. We have no competition no one does what we do and how we do it.

We have on going trainings and leadership conference and home office is open from 7am -7pm Central Time where there is a full staff standing by to assist our reps daily and plus we have an automated assistant available 24/7 to answer any questions or need we might have. Our Commission structure is we get paid daily by direct deposit and commission increases per how many plans you sell with cash bonuses and overrides bonuses.
 
Company ID: 114441 - Click Here for Full Details
Product Lines:
Our Company Produces a Wide Range of Clear Plastic Packaging Solutions to Meet your Specific Retail or In-Line Needs.

Products Range is: Industrial Dunnage Trays, Food Containers, Medical and Pharma, Fresh Agriculture, Bakery and Confectionery, Take Away Containers, Stationery, Dairy. 
 
Target Markets:
Our Target Customers are Purchase Managers of Multinational Companies, Wholesale Distributors.

Suppliers such as:
1) Restaurant Depo
2) Dollar Tree
3) Shoprite
4) Woolco Foods Inc
5) Tundra Restaurant Supply
6) Walmart

Distributors:
1) Universal Distribution Centre
2) Abaline Supply 
 
Sales Opportunity:
This is an exceptional opportunity to work with an International Company, new line, great scope of growth. Our company want our sales reps to be a part of our family. We will support our sales rep in the best way possible.
 
Company ID: 114440 - Click Here for Full Details
Product Lines:
Our Product is a Windows®-Based Program Designed to Increase Efficiency in Creating Safety Permits; i.e. Lockout Tagout (LOTO), Job Safety Analysis (JSA), Permit to Work (PTW), Confined Space, Hot Work, and much, much more to Help Clients Meet their Safety Requirements. 
 
Target Markets:
Power Generation Sector: Power Plants, T&D, Nuclear Plants, Oil & Gas, Pharmaceutical, Manufacturing, Construction. 
 
Sales Opportunity:
Commission based contract with opportunity of annual residual on top of commission structure. Only lead generation or introduction needed, then opportunity is handed to tech sales team to close.
 
Company ID: 114414 - Click Here for Full Details
Product Lines:
North American Transportation Services.

We Provide Trucking, Intermodal, Ocean, and Air Freight Shipping Throughout the World. Trucking Services are on Dry Vans, Refrigerated Vans, Flatbeds, and other Specialized Equipment. Same Day Pickup and Delivery, LTL, FTL, & Expedited Services. 
 
Target Markets:
Our target market is Mid-Sized Manufacturing and Distribution Companies within Canada and USA.
- Food Industry
- Auto Parts
- Textiles
- Steel
- Plastics
- Wholesale Trading
- Retail Merchandise
and more 
 
Sales Opportunity:
Our company is looking for a sales representative who has a hunter mentality & knows how to close deals to help us expand our transportation services into the market place. We are a start up logistics company but with over 20 years experience in the transportation industry we are experts in our field. The selected candidate must have a proven track record selling and must be aggressive in sales. Our commission structure is competitive you set your own hours.
 
Company ID: 114392 - Click Here for Full Details
Product Lines:
Electric Charging Station for Electric Cars.

We have smart charging stations for home, condo and multiplex application. We have a patent for an application to make electric vehicle charging for application in high-rise condominiums. 
 
Target Markets:
Electrician or direct Customers, Residential, Commercial, and Industrial. 
 
Sales Opportunity:
Let’s change things for the better, together. You’re invited to take part in the most important Canadian network of electric vehicle owners and collaborate with us in fostering a better ecological future. Because the future is now!
 
Company ID: 76734 - Click Here for Full Details
Product Lines:
Family of Ceramic-Matrix-Composite (CMCs) Materials & Components for Petrochemical, Industrial, and Aerospace Applications.

A Hybrid Between Monolithic Ceramics & Conventional Composites, CMCs Offer Desirable Properties of Monolithic Ceramics such as SiC Plus High Thermal/Mechanical-Shock Resistance. 
 
Target Markets:
Reliability Engineers in Petrochemical Processing. Process/Design Engineers whose Operating Environment is High Temperature (up to 2,500°F), Corrosive, Abrasive, Chemically Agressive, and/or where Component Weight is Critical. Alternatives to Silicon Carbide, Vespel, Inconel, Hastelloy, Haynes 230. 
 
Sales Opportunity:
We seeks qualified reps with a background and pre-existing relationships in the petrochemical-processing, semiconductor-processing, industrial and/or aerospace industries. This is a commission only position.

Our ceramic-matrix composite (CMC) materials and components are a mature technology with an aerospace pedigree. Historical CMC aerospace applications include turbine engines, hypersonic vehicles and rocket/missile attitude-control systems. While some materials within our CMC product family are suitable for use in the aforementioned applications, our CMC-industry-unique primary focus is value-based CMCs suitable for use in petrochemical and industrial applications. Our current applications include; bearing in large, high-value petrochemical processing pumps, metal-forging & aerospace secondary structure. Other potential applications include waste-heat recovery systems & armor applications.

Reps can be confident you will receive the support you require to be successful. We will ensure you have an understanding of the technology, the materials within our product line, and, most important, their relative strengths and weaknesses as compared to baseline materials such as Silicon Carbide, Vespel, Inconel, Hastelloy, Haynes 230, or other high-temperature Nickle-based alloys.

We are a small company but do not qualify as an SBA small business due to our relationship with an affiliated company. We seek to grow our customer base.
 
Company ID: 114376 - Click Here for Full Details
Product Lines:
Anti-Tack Agent for Uncured Rubber.

Used as Raw Material for the Tire and Rubber Industries. 
 
Target Markets:
Tire, Rubber Goods Manufactures, and Chemicals Distributors. 
 
Sales Opportunity:
We are looking for independent sales representative to develop the USA market, with high commission percentage. Our product has high performance and low cost. The reps will have all commercial support. The commission structure is 10% of the Sales (EXW price). All the USA market will be under your responsibility.
 
Company ID: 91619 - Click Here for Full Details
Product Lines:
We are an Innovative Manufacturer of Handling and Storage Equipment with a Focus on Providing Solutions for the Door, Window, and Glass Industry and other Heavy Products.

Trolleys, Dollies, and Storage Solution with Careful Consideration for what Professionals Needs to be at the Top of their Game. 
 
Target Markets:
Warehouses, Transportation Companies, Windows and Doors Companies, Glass Shops, Construction Sites, Moving Companies and Stores, Companies Specialized in Home Appliances, Mattresses, Furniture, Treadmills, Electronics, Sports Specialists, and Rental Companies. 
 
Sales Opportunity:
This is a unique opportunity for reps to sell some unique new material handling equipment designed to move heavy products very easily. There is actually no competition in North America that manufactures that type of equipment to move parts as heavy as 800 lbs with only one person and Zero Effort. The reps will have full marketing support and a very attractive commission rate.
 
Company ID: 114363 - Click Here for Full Details
Product Lines:
Our Power Steering Stop Leak Product is a Specially Designed Blend of Petroleum Distillates Made to Perform a Controlled Swell of Leaking Neoprene Rubber Seals Found in Power Steering and Rack and Pinion Systems.

Our Product also Quiets Noisy Pumps and Conditions the Power Steering Fluid. 
 
Target Markets:
Our target Customers are Auto Parts and Hardware Stores, Auto/Truck Repair Shops, Oil Change Establishments, Truck Stops, and Used Car Lots are also Staple Markets. We Hold a Tremendous Interest in Acquiring Independent NAPA Auto Parts Stores as well as ACE, Loves, and Flying-J Truck Stops. 
 
Sales Opportunity:
Aside from territorial exclusiveness, we begin our sales commissions well above the industry standard. As one of our sales agents remarked, "I like the way you think!". We are looking for sales representatives for the long haul; not ones to be thrown away as soon as a purchase order is in our hand. We provide our sales agents with the tools needed and maintain an open door policy to help our people in any way we can.
 
Company ID: 114330 - Click Here for Full Details
Product Lines:
Chemicals:
- "Everything" Cleaner/Degreaser, Biodegradable, CFIA, Phosphate Free, Various Sizes
- Pressure Washer Chemicals
- Wash & Wax Chemicals
- Private Label Chemicals
- Vent Filters
- Custom Filling 
 
Target Markets:
- Automotive Distributors/Wholesalers
- Industrial Accounts
- Food Distributors
- Sanitation/Janitorial Accounts
- RV/Marine
- Retail 
 
Sales Opportunity:
Great opportunity for individual or group. We market our products through major distributors, some of these distributors are in place. All products are made in Canada. We offer a great commission structure. We are seeking individuals or group's to represent our products line in. The Eastern Canada and Quebec regions.
 
Company ID: 60439 - Click Here for Full Details
Product Lines:
Pump Components
Agricultural Bearings for Implements
Bearings
Machined Part & Components
Precision Cut Tubing
Stamping 
 
Target Markets:
Pump Manufacturers, Fan and Motor Manufacturers, Agriculture Equipment Manufacturers, Automotive Suspension Manufacturers. 
 
Sales Opportunity:
We are an IATF 16949 registered manufacturer. We are looking for reps in areas and industries that we don't necessarily do business with. We have been involved in the automotive and bearing industries since we began in 2002 and are now looking to expand into other industries that our products will complement. These industries would include pump manufacturers and distributors, farm implementation manufacturers, fan and motor manufacturers and distributors as well as others.

We are a privately owned company with a deep history and great reputation in the industries we currently provide to. We employ outside sales reps based on an adjusted commision of invoiced sales for production parts. Qualified commisions are paid monthly.
 
Company ID: 114263 - Click Here for Full Details
Product Lines:
Machine Vision and Automation Solutions.

We Design and Produce Custom Solutions to Meet Today's Competitive Market. 
 
Target Markets:
Pharmaceutical, Packaging, Manufacturing, Automotive, Industrial, Military. 
 
Sales Opportunity:
Ours is a 25 year old company with the technical knowledge to meet the customers critical needs. We have a great reputation for supplying a quality product. We support our staff to assure the customer is happy. One of our advantages is low overhead to maintain costs.
 
Company ID: 114253 - Click Here for Full Details
Product Lines:
Manufacturing Consultant. 
 
Target Markets:
Automotive Tier 1 & 2 Suppliers. 
 
Sales Opportunity:
Our Services Provide:
- OEM Supplier wall to wall assessments and gap closure analysis plan.
- Work with high level management team at troubled suppliers to identify and resolve performance issues.
- Resource Leveling - Perform manning assessments and identify detailed roles & responsibilities, and any training requirements or personnel changes.
- We have global access to technical support in all areas of manufacturing Ex. Engineers, metal stamping experts, injection mold technicians, quality engineers, production supervision, logistics, and smelting.
- For the past five years I’ve been fixing companies that are broke (literally), and turning them into profit centers. That’s my passion!
 
Company ID: 114223 - Click Here for Full Details
Product Lines:
Contract Manufacturer
Board Type: Single/Double Sided, Multilayer.

Materials:
• FR-4/FR-5
• High Tg Laminate
• PTFE (Teflon/High-Frequency)
• Ohmega & Similar

Surface Finishes: Bare Copper, HASL, Immersion Tin, White Tin, SMOBC (Solder Mask on Bare Copper) 
 
Target Markets:
• Automotive
• Communication
• Industrial
• Medical
• Military/Aerospace 
 
Sales Opportunity:
Our company is a world class supplier of RF, Microwave and Antenna PCBs for the Aerospace, Defense, Telecommunications and Medical Device industries. Over the years we have made substantial investments in the latest Technologies, Equipment, Facilities and Personnel to support a diverse variety of product types. We have four state-of-the-art facilities on three continents to serve you. From rapid prototype development to large scale production ramp-ups we supply many notable OEMs and EMS service companies around the world.

Our purchasing power coupled with over 26 years of processing experience allows us to provide you one of the largest stocks of RF/Microwave and Teflon™ materials in North America with the best price points and lead times in the industry. Working with many of the largest OEMs in the world we are constantly reviewing and adjusting our inventory to meet the latest trends in technology by stocking the most popular products from Rogers, Taconic, Nelco, Isola, and Arlon to meet your immediate needs.

Certifications:
• IPC-6012 class 3
• IPC-6013 class 3
• ISO 9001
• ITAR registered
• ROHS compliant
• UL

Specialties:
• Blind/buried vias
• Carbon contacts
• Controlled depth drilling
• Controlled depth milling
• Controlled Impedance
• Edge plating
• Filled/plugged vias
• High Frequency
• Large format PCB
• Landless vias
• Plated Through Holes
• RF
 
Company ID: 114153 - Click Here for Full Details
Product Lines:
Training Systems for Small and Large Armored Vehicles. 
 
Target Markets:
Armies in all countries worldwide. 
 
Sales Opportunity:
We are currently in about 17 countries including the U.S. Army, National Guard, and Marine Corps. We fire live and most systems are Patented. A new line coming up takes the place of very expensive Missiles. Some of our current customers have purchased our devices as many as seven times. Currently we need someone to pick up our work done with the U.S. Marine Corps, their systems are old and need replacing. We are a 26 year old company located here in central Ohio.
 
Company ID: 114143 - Click Here for Full Details
Product Lines:
Soft Absorbers or Dampers that Soften Closing Items (Lids, Seats, Handles, Drawers, etc.), Cyclonic Filters for Water Based Coolant (No Oil, no Particles Above 3mm). 
 
Target Markets:
Automotoive, Off Road Vehicles, and Home Appliance Industries. 
 
Sales Opportunity:
We offer exclusive territory rights to our sales reps. We offer small rotary dampers which our competitors cannot emulate, linear dampers that are very small, and large high torque rotary damper, and each damper has many different variants for shape and size making it easy for manufacturers to design special projects.

We offer a cyclonic filter which requires no maintenance, no running cost, and can be set up in a completely automatica system. It removes 98% of the 10 micron particle and 70% of the 5 micron particle. Oil based coolants do not work with our filter, only water based that are below 2.5Cp. No particles larger than 3-4 millimeters or it will clog. We offer free trials to interested companies.
 
Company ID: 114134 - Click Here for Full Details
Product Lines:
Solenoid, Solenoid Valves, Solid State Relays, and Required Mechanical Background. 
 
Target Markets:
USA market is currently open for new rep 
 
Sales Opportunity:
Our company is one of leading solenoid manufacturer and our headquarters is located at Taipei, Taiwan with factory located at Ningbo, China. Our solenoids have been widely applied in various industries like kiosks, security, elevators, or automobiles.

1. We provide solution with cost down to customers.
2. We provide technical support to your customers.
3. We start with 3-5% commission by project based.

We are interested to work with you and your company in the near future, and shall answer any questions you may have. Please feel free to submit a sales inquiry us at any time.
 
Company ID: 76745 - Click Here for Full Details
Product Lines:
Mineral Polymer Material can be Modified to Remove Contaminants from Water Selectively or in Broad Spectrum of Applications.

Our Patented 2-Stage Modified Mineral Geopolymer - Biopolymer Works as a Precision Molecular Sledge Hammer to Remove Contaminants from the Most Difficult Types of Water. 
 
Target Markets:
Agriculture, Aquaculture, Beverage Manufacturing, Environmental, Industrial, Mining, Extraction, Municipal, Nuclear - Anything that has to do with Water! 
 
Sales Opportunity:
No one in the World can do what we have accomplished! We are the Global Manufacturer of a Patented 2-Stage Modified Mineral Geopolymer - Biopolymer Works as a Precision Molecular Sledge Hammer to Remove Contaminants from the Most Difficult Types of Water. This has taken over 10 years to perfect! All of the World Patents are now in place.

We can do the following:
Contaminant removal including and not limited to the following;
• Total Suspended Solids
• Total Dissolved Solids
• Nitrates
• Phosphates
• Radionuclides
• Arsenic
• VOC’s
• Heavy Metals
• Pesticides
• Pharmaceuticals and Estrogen
• Viruses
• Parasites
• Microbial Cysts
• Bacteria
• Algae
• BOD, COD & TOC

The Founder & CEO recently said: As far as chemistry goes, if there's a better 1-2 combo out there, it's from a boxer that hasn't been born yet. Submit a sales inquiry to us because the next BIG Oil Field Strike will be"How to Clean Water that nobody else in the world can - But We Can!
 
Company ID: 114054 - Click Here for Full Details
Product Lines:
Anion Exchange Membranes and Polymers.

This is Stable in Both Highly Basic and Acidic Environments, Providing an Improved Product Lifetime in the Harshest Operating Conditions. Broad, Non-Toxic Processability Allows it to be Sold as a Polymer Resin for Coatings or as Cast Membrane. 
 
Target Markets:
Water Treatment OEMs, Chemical Plant Operators and Design Engineers, Energy Sstorage OEMs, Hydrogen Technology OEMs, Biomedical.
Electrodialysis, Capacitive Deionization, and Electrodeionization, Sulphuric and Hydrochloric Acid. Redox Flow Batteries, Fuel Cells & Electrolysis, Biomed Sensors. 
 
Sales Opportunity:
Manufacturers of electrochemical equipment purchase annual volumes in the range of 5,000 - 100,000 square meters of membrane material per year. Each large chemical recovery or generation facility is comprised of 2,000-10,000 square meters of membrane material which is replaced every 1-2 years.

The overall market for ion exchange membranes is currently over $1B and by 2020 is expected to reach $2.5B in existing markets. Of this market, approximately $300M is readily serviceable using Aemion materials and as a sales organization, this could represent up to $30M in potential revenues from recurring sales opportunities.
 
Company ID: 114027 - Click Here for Full Details
Product Lines:
We Manufacture Unique and Patented Safety Documentation.

Including:
- Pre-Use Checklists that Actually Work
- Contractor & Visitor Control
- Safe Work Permits
- LOTO
- Banners for Outdoor & Racking
- Pocket Near Miss Reporting & Safety Behavior Books
- Safety Awareness Collateral
- Lanyards
- ID's 
 
Target Markets:
Safety and Security Managers. 
 
Sales Opportunity:
Our products make safety managers better at their jobs almost instantly. A safety manager is always striving to reduce accidents and comply with internal and external regulation but they can't do this on their own. We know that they strive to achieve a safety culture through driving safe working behavior all the time (including when they are not looking!). That is what our products do.

From a commercial standpoint, our products are not available anywhere else in the USA and are used by 20,000 customers around the world. This is an opportunity to be the organization who makes an immediate positive impact on a safety mangers effectiveness and benefit from revenues that is not one off but repeats all the time. It also offers other reasons for you to speak to your customers.

Our products are being very successful in North America, no doubt they will find their way to your customer so why not check out if your area is available and be the organization that benefits from the sales, not someone else.
 
Company ID: 113982 - Click Here for Full Details
Product Lines:
Industrial Cleaners, Concrete Patch, Asphalt Patch, Epoxy Floor Coatings, Snow and Ice Melt, Masonry Waterproofing, Enzyme Sand Sewer Treatment Products, Odor Control, Floor Finishes, Drain Line Opener, Citrus Liquid Products. 
 
Target Markets:
Building Maintenance Departments, Industrial Builders, Painting Contractors, Concrete Contractors, Specialty Coating Contractors, Waterproofing Contractors. 
 
Sales Opportunity:
Turn your contacts into cash with commissions paid on invoicing. Established company looking for reps with a following in any of the above listings. We want to establish long term mutually beneficial relasonships.
 
Company ID: 113979 - Click Here for Full Details
Product Lines:
Rubber to Steel Bonded Parts
Rubber to Steel Bonded Suspension Parts (Bushings, Top Mounts, Spring Seats, etc.)
Rubber Over Mold Parts
Structural Plastics
MCU - Micro Cellular 
 
Target Markets:
Automotive
Sport Industry
Heavy Truck
Construction
Off Road
Agricultural 
 
Sales Opportunity:
We have sales in MN currently and we are looking for Sales Reps in other areas of NA to assist in getting better coverage. Our competitive edge is the fact that we have a facility in MN and we have also facilities in China. Reps will be supported by Engineering, PM, etc. during meetings at the customer.
 
Company ID: 113974 - Click Here for Full Details
Product Lines:
Replacement Filters. 
 
Target Markets:
Home Hardware Distributors
Outdoor Power Equipment Distributors
Garden Machinery Distributors
Filter OEM Brands
Other Distribution Channels 
 
Sales Opportunity:
- Our filters are a high frequency replacing part (one time refresh every season, large aftersale market demand need to meet.
- 2nd brands in this market as we know are not good enough in quality and performance as we do and price.
- We are the supplier for famous OEM Brands like MTD, Honda, Kohler, etc. in this market. Our quality and performance are recognized in 1st level market.
- Prices for aftersale market are staying high that we can earn enough money to pay you high.
- Wherever you are in North America, come and join us to create the future.
 
Company ID: 113965 - Click Here for Full Details
Product Lines:
Explosion Proof Lighting Products
Portable Power Distribution
High Lumen, High Efficiency Lighting
Explosion Proof 7 Vapor Proof LED Drop Lights, Flood Lights
Custom Solutions Manufacturing
Re-Rental Fleet Available
100% USA Made and US Veteran Owned and Operated 
 
Target Markets:
Lighting Distributors
Environmental
Oil & Gas
Utility/Power Plants
Nuclear Plants
Shipyards/Marine
Aviation
Government, FEMA, Homeland Security
Construction
Painting Booths
Automotive
Food & Beverage
Grain Storage 
 
Sales Opportunity:
USA Made in Haltom City Texas. Company is Veteran Owned and operated. We manufacture Explosion Proof and Vapor LED lights. Great opportunity to get these products into the hands of many customers in multi-industries. looking for representatives to canvass the country.
 
Company ID: 113927 - Click Here for Full Details
Product Lines:
Portable Trade Show Booth Kits.

Anti-Fatigue Interlocking Flooring:
- Wood Interlocking Flooring (9 Colors)
- Carpet Interlocking Flooring (13 Colors)

Outdoor Flags & Roll Up Banners:
- Rollup Banners (Single and Double-Sided)
- Outdoor Flags (Several Different Shapes - up to 16.5') 
 
Target Markets:
Any Company that would Exhibit at Trade Shows or have a Need for Outdoor Flags, Roll-Up Banners, or Foam Flooring. 
 
Sales Opportunity:
This is an opportunity to get in on the ground floor and work with a new, growing company that was created on a basis of exceptional customer service, added value and transparent pricing. Our team includes event industry experts, talented designers and great logistics and operational support.

We are on a mission to provide the smoothest ordering process available for our customers. As a team, we understand the value sales reps can bring so we strive to offer generous commission packages as well as exclusive protection for your territory. If you are interested in learning more please don't hesitate to contact us so we can discuss our product line and the opportunity. Thanks for considering working with us.
 
Company ID: 112168 - Click Here for Full Details
Product Lines:
Custom Contract Manufacturer of Wire Harnesses, Complex Cable Assemblies, and Overmolding. 
 
Target Markets:
Industrial Automation
Transportation
Medical
Avionics/Military 
 
Sales Opportunity:
Exceptional very high quality manufacturer of wire harness, cable assemblies and overmolded products. Maintains 25ppm rating with ITAR, ISO:9001:2015 registration as well as UL, UL-c, etc. Engineering for product design in house, mold making in house as well as 3D models. Engineering driven and solutions oriented selling to a diversified market. Customers include Boeing, Steris, ABB, Parker Hannifin and others. Great opportunity for an aggressive rep firm.
 
Company ID: 113528 - Click Here for Full Details
Product Lines:
Rechargeable OEM Battery and Charger Products.

Heavy Value-Added Services including Development, Co-Development, Engineering, Low/High Volume Manufacturer of Battery and Charging Products. North American Engineering and Marcom. Over 30 years in OEM-Centric Secondary Battery and Charger Business. 
 
Target Markets:
Medical, Asset Tracking, Consumer Goods, Telecom, 50K to 5mm pieces Annually. 
 
Sales Opportunity:
Simply put, we are looking for independent sales representation for several areas in North America. All account management handled by offices in the US. We offer the opportunity to work with a well respected, stable manufacturer that has continued for over 30 years in the secondary battery/charger market supplying consistent, very price competitive, OEM products.

We offer off-shore pricing on finished goods from our 100K+ sq ft manufacturing facilty But with North American product development and control. We are open to explore any opportunity from your existing account base. It literally starts with asking your customer "do you use rechargeable batteries?" To this point we have focused exclusively on in-house sales and account management and are actively moving to an independent sales force strategy. Commission is fair and negotiable.
 
Company ID: 76416 - Click Here for Full Details
Product Lines:
In Business since 1912, we are a leading Manufacturer of High Volume, Precision Metal Stampings and Assemblies, and the Tooling to Produce Them.

In addition to Precision Stamping we have ~65 Multi-Axis CNC Machining Centers, Laser Welding, Laser Cutting, Metal Finishing, and Pad Printing. 
 
Target Markets:
We Sell to a wide range of manufacturer's and OEM's in the following markets: Medical (Device and Drug Delivery), Automotive, Aerospace,and Consumer Goods. We also sell to Molding Companies that do Insert Molding. We would like to Penetrate the Firearms and Electronics Markets. 
 
Sales Opportunity:
We are looking for Manufactureres representatives in Southeast and West Coast US, Canada, and Mexico. Our company is one of the most respected tooling and metal stamping companies in the country and we are looking to partner with sales organizations that can help us grow and diversify. Being a contract manufacturer we are capable of producing precision parts, on time for any industry. Our engineering and die design departments have the experience and skill to handle the most complex projects from prototype through production.
 
Company ID: 112825 - Click Here for Full Details
Product Lines:
Premium Purified Water.

Distribution: Nationwide. Sizes Available in 12 oz., 16.9 oz., and 20.oz Size Bottles. Caps come in Blue and White Turn Off Caps and Sports Caps. Other Facts: Alkaline Water is Available for Home and Office Delivery Available in 1 Gallon and 2 Gallon Sizes. 
 
Target Markets:
Supermarkets, Mom & Pop, Retail, Hospitals, Sports Arenas, Walmart, CUTSCO, Whole Food Stores, etc. Schools, etc. 
 
Sales Opportunity:
According to US Bottled Water Market Statistics & facts, the US market was the largest bottled water consumer market in 2016 with bottled water sales volume of about 12.8 billion gallons. This figure is the highest volume of bottled water ever sold in the United States. This is a good opportunity for our team to capitalize on.

The top selling brand names have captured more than 55% of the market, but private label companies still have the chance to create a niche for their products. Americans spent an average of $11.12 billion on nearly 9.7 billion gallons of water, putting the average cost at about $1.22/gallon. Delivery cost of our bottled water range from $0.29-$0.33 cents per 12 oz bottle, and 16.9 oz sizes incentivizing good commission and other financial compensation arrangements.
 
Company ID: 113854 - Click Here for Full Details
Product Lines:
Electrical Harnesses for Power Supplies and Amplifier Systems, Interconnect Cables, Line Cords, Single Phase and Three Phase.

Euro and US. Prototype and Production Harnesses, All Turn-Key. 
 
Target Markets:
Electronic Assembly Companies. 
 
Sales Opportunity:
Looking for independent Reps. Compensation: commissions and bonuses. We sell quality services (do not tolerate errors). 16 years in business, and intend to be around a long time. We work hard to earn our customers and reps trust.
 
Company ID: 113839 - Click Here for Full Details
Product Lines:
Full Line of Soda Blasting Equipment from Mobile Compressor Units to Stand Alone Economy Units.

These are Commercial Grade Units Not Typical for Homeowner Use. Blast Pots, Air Coolers, Moisture Separators, Hoses, Nozzles, and all the Accessories including Blast Media. 
 
Target Markets:
Aerospace, Auto Body, Marinas, Food Processors, Oil and Energy, Construction, Smoke, Mold Cleaning, and more. 
 
Sales Opportunity:
We have been in business for 28 years and are currently looking for a rep to help us sell our products west of Minn and Louisiana, Our distributors handle everything east of that. My target is primarily the southwest and west coast even into Canada.
 
Company ID: 113824 - Click Here for Full Details
Product Lines:
Our company Manufactures Shipping Monitoring Devices that Detect G Force Shock and will Indicate when a Specific G Level is Exceeded.

We Offer Disposable Impact Indicators, Re-Usable Shock Indicators more Advanced Digital Devices that Monitor and Record Impacts and Temperature. 
 
Target Markets:
Power and Energy (e.g. Transformer Manufacturers), Aerospace, Military and Defense, Marine & Offshore, Aviation, Medical Instrument Manufacturers, Nuclear, Technology (Servers & Routers), Instrumentation, Glass Nanufacturers, and others. 
 
Sales Opportunity:
We are looking for Manufacturer Representatives to sell our products in North America. Our products are quality manufactured devices that are precise and reliable. We provide excellent compensation on the products. Our technical and sales support is excellent and responsive. We provide training on our product line and our customer service is friendly and supportive. We are also proactive marketing the pour products and have strong web/market presence.
 
Company ID: 113823 - Click Here for Full Details
Product Lines:
Automotive Body Parts, Collision Parts like Plastic Bumpers. 
 
Target Markets:
Distributors, Dealers, and Body Shops. 
 
Sales Opportunity:
We are an OEM quality Manufactures of Plastic injection moulded automotive parts like Bumpers and have an extensive list of parts immediately available at very competitive prices. Our manufacturing facility are based in India.
 
Company ID: 113779 - Click Here for Full Details
Product Lines:
We have Capacity in Plastic Sheet Extrusion and Thermoforming Custom Molding to Sell. 
 
Target Markets:
Canada and USA OEM Companies 
 
Sales Opportunity:
We intend to target this market through independant manufacturer reps. Competitive price available to make it a success for everybody involved. The idea is to identify OEMs looking for custom molders and/or plastic extruded sheets to feed their own thermoforming production. We have a high level of technical expertise.
 
Company ID: 112724 - Click Here for Full Details
Product Lines:
Our Company is a World Leader in the Compressed Air Tool Market.

For the last 50 years. Spray Guns, Pneumatic Chalking Guns, Beading, and Sprayable Seam Sealer Guns, Blow Guns, Gun Washers, Regulators, and Quick Connectrs. 
 
Target Markets:
Auto Body, Automotive and Truck Repair, Construction, Tool, and Hardware. 
 
Sales Opportunity:
Our company has produced quality spray guns and tools for over 50 years and just expanded into the United States. We are offering a tiered commission plan along with company support, in personal and literature. This line will give you a unique line that sells itself.
 
Company ID: 113732 - Click Here for Full Details
Product Lines:
Brake Disc and Brake Drums for Automotive Use for Passenger Cars and Light Vehicles. 
 
Target Markets:
Regional Distributors of Auto Parts. 
 
Sales Opportunity:
Our company is located in South Brazil. We manufacture brake disc and drums with international quality certifications ISO and TS. Our company manufactures several products to your market.
 
Company ID: 113722 - Click Here for Full Details
Product Lines:
Aerosol Cleaners, Odor Eliminators, Car Wash Brushes, Chamois, Carpet Protection Film, Car Dealer Supplies, Towels, Sponges, Trigger Sprayers, Clay Bars, Water Nozzles, Chemical Dispensing Equipment, Buffers, Polishers, Buffing Pads, Compound, Polish, Wax, Super Concentrated Cleaners, and Degreasers. 
 
Target Markets:
New and Used Car Dealers, Car Washes, Auto Detail Shops, Trucking Companies, Limousine Companies, and any Business with a Fleet of Vehicles to Maintain. 
 
Sales Opportunity:
Our company offers a comprehensive line of automotive detailing supplies at aggressive prices. With volume discounts and quick shipping you are sure to create happy repeat customers. We currently ship over 1,000 packages per month and have much room to grow. Submit your sales inquiry to us now and begin the journey into a rewarding and lucrative venture with our company.
 
Company ID: 113699 - Click Here for Full Details
Product Lines:
Design and Manufacturing of Electronic Transformers for Industrial Applications.

Small to Medium Production Volumes. Innovative Designs and Quick Turnaround Times. 
 
Target Markets:
Manufacturers of Power Supplies, Test Equipment, Specialty Lighting Applications and Equipment, Medical Electronics, Avionics. Selling mostly Nationally and to Limited Foreign Customers. 
 
Sales Opportunity:
Looking for ambitious reps to dramatically increase our sales. Opportunity to acquire a share in the business. Currently I have no sales force. Sales by reference through established engineering contacts.
 
Company ID: 113285 - Click Here for Full Details
Product Lines:
Credit Card, No Processing Fee Services, Patented Consumer Finance Program, Accounts Receivable Factoring, Purchase Order Financing, Asset-Based Lending. 
 
Target Markets:
Automobile and Equipment Leasing Companies, Apartment Managers, Doctors, Dentist, Small Businesses, etc. 
 
Sales Opportunity:
A national business consulting firm, is hiring independent sales reps to become part of our Independent Revenue Consultant team working with businesses in markets across the U.S. We are helping businesses lower their costs and increase revenues through our innovative solutions.

*There is No Investment! *This is Not a MLM/Network Marketing! *This is Not Life Insurance *Potential Life Time Residual Strong Six Figure Income! We are helping merchants Eliminate their credit card processing fees - Forever!

The independent sales reps we hire will also have access to market a Patented Global Finance Program Already In 72 Countries and Now Available In The United States! This product can be sold to automobile leasing companies to allow their clients to finance the lease deposit, to apartment managers so tenants can finance rental deposits, dentist, doctors, jewelry stores, etc. Installment Finance Program with No Credit Check! No Interest! Up to 12 Month Installment Plans!

Our independent sales reps earn a 60% commission on produced revenue.
 
Company ID: 113186 - Click Here for Full Details
Product Lines:
Our Turnkey Build-to-Print and Custom Manufacturing Services include CCA, Conformal-Coat, Assembly, Test Design, Environmental Qualification, and a Host of Specialized Requirements for the Design and Production of Products.

Solid portfolio of existing products. 
 
Target Markets:
Primarily Defense/Aerospace Industries. 
 
Sales Opportunity:
Our unique services and processes have been honed on our parent company's product lines and those of other defense primes. We have the physical and process infrastructure to take on complex defense electronics assemblies and complete box builds. In addition, for products that are lower TRL we have a mature NPI process to help ensure a seamless transition from the lab to manufacturing and ultimately the field. We have an existing and positive track record with several large defense prime contractors and looking to grow our footprint within the Northeast. CCA has also been recently added to our portfolio to round out our EMS offering.
 
Company ID: 113656 - Click Here for Full Details
Product Lines:
We are a Authorized Distributor for Exxon Mobil Base Oil in Upstate NY.

We are looking to sell Motor Oils (Cars & HD), Industrial, Lubricants, Farm Equipment, and Antifreeze. The Packages are Available in 1 Quart (Pouch and bottle), 1 Gallon, 5 Gallon Pail, and 55 Gallon Drum. 
 
Target Markets:
Our targeted markets are Auto Supply Distributors, Oil Distributors, Convenience Stores, Truck Stops, Trucking Companies, Farm Equipment Distributors, Heavy Duty Equipment Companies, Grocery Stores, and etc. 
 
Sales Opportunity:
Working with us you won't be disappointed by the quality of our product which means the customers will be satisfied both quality and pricing. Our products are formulated as same as national branded products but since we are not a recognized brand our pricing is competitive. We don't disrespect our sales reps and customers, we support our people. We will increase the % of the commission depends on the volume of sales. The commission starts 5% and up.
 
Company ID: 110419 - Click Here for Full Details
Product Lines:
Rod Ends and Spherical Bearings Made in The US.

We are a Small Manufacturer that Offers Quick Delivery on Standards and Specials. 
 
Target Markets:
Aircraft, Industrial Distributors, Race Car Builders, Packaging Equipment Users, Hydraulic Cylinder Re-Builders among others. 
 
Sales Opportunity:
We are an established company looking to grow our customer base. We have some established accounts and are looking for someone to call on these as well as establish new customers. Our company makes a high quality product and a competitive price with some of the best lead times in the industry.
 
Company ID: 111437 - Click Here for Full Details
Product Lines:
Warning Lights, Tower Lights, Beacons, LED Tower Lights, LED Work Lights, and Electric Sounders. 
 
Target Markets:
All Manufacturers such as Automotive, Machining Tools, Semiconductors, Energy, Pharmaceutical, Oil and Gas, Ship Building, Food, Packaging, BIO, etc. 
 
Sales Opportunity:
We would like to seek robust sales partners in signaling device distributors and end-users focusing on automation industries. Similar manufacturers are such as Patlite, Werma, Banner Engineering, Auer, E2S, Edwards Signals, Pfannenberg, etc.
 
Company ID: 52315 - Click Here for Full Details
Product Lines:
We are a New Broadcasting Company Offering Churches, Schools, Entertainment Venues, Auctions, Horse Clinicians, Funeral Homes.

Anyone Wanting their Own Channel on BRN Network Both Live Broadcast and Place Videos for People to Watch. 
 
Target Markets:
Churches, Especially Cowboy Churches, Schools, Nightclubs, Entertainment Promoters, Entertainers, Bands, Funeral Homes, & Photographers that do Weddings. 
 
Sales Opportunity:
Lots of potential clients nation wide, easy sale. A channel cost the provider a one time cost of $500. Rep get 50% of that $500 plus 20% of all network viewer revenues is pooled and divided among all sales reps so you can build a good residual income Great for full time or part time rep & especially reps already calling on target markets.
 
Company ID: 113333 - Click Here for Full Details
Product Lines:
Our product is a Location Tracking System (LTS) RFID active tag with sensor capabilities that adds the ability for the tags to “talk” to each other rather than communicating through fixed RFID readers and antennas. 
 
Target Markets:
No more costly requirements to install ethernet cabling, power, mounting brackets and active RFID transponder antennas in multiple locations. 
 
Sales Opportunity:
Using this product with known locations, you can create fixed locations within your facility, then use our mobile unit attached to your high value assets to track their location. It works seamlessly with our software solution! This! is an RFID asset tracking software solution, that can dynamically display the location of your unit onto a map of your facility. Manufacturing, Oil and Gas, MRO's, CNC shops. Submit a sales inquiry to us and we will send you a PDF on reason why to sell our technology.
 
Company ID: 113531 - Click Here for Full Details
Product Lines:
Systems Integration, Engineering & Machine Building.

We Provide Turnkey Test System and manufacturing System Automation Development and Design. Our Experienced Engineering Team can Handle a Project from Concept through Commissioning. 
 
Target Markets:
We have Extensive Experience Building Machines and Systems for:
Light Rail Mass Transit Test Systems
Assembly & Test for Industrial Manufacturing
Defense Systems including Explosives Processing
Thermal-Fluidic Systems for High Performance Computing 
 
Sales Opportunity:
We are looking for sales representatives to expand our established & growing business. We offer the opportunity to augment existing sales pipelines with value added systems integration & machine building capability. We offer responsive sales support to get accurate quotes into your contacts hands quickly and can offer high quality, high value solutions for test automation & custom machine building. We are a National Instruments Alliance partner for test solutions.
 
Company ID: 113526 - Click Here for Full Details
Product Lines:
Full Line of IP Cameras, Building Entry Systems, DVR/NVR's, Digital Camera Systems, Moveable Security Cameras with Smart Tracking Individuals or License Plates, Advanced Compression Technology Cameras. 
 
Target Markets:
Verticals such as:
Automotive
Banking
Education
Engineering
Government - Federal, State, Local
Healthcare
Legal
Manufacturing
Technology
Telecommunications
Transportation (Travel)
Electronics
Not-for-Profit 
 
Sales Opportunity:
This is a fairly new opportunity with excellent commission rates of 10% of sales. Our company also has a full installation and technical support team to assist product selection and all product needs for these customers. Great opportunity with a new product line. We just need distribution gains as products perform as well as anything out there.
 
Company ID: 113522 - Click Here for Full Details
Product Lines:
Mack Genuine Parts, Luberfiner, Wix, Permatex, Bosch, Federal Mogul/National, Abro, Gabriel, FJ-TECH, KLM, Spicer, WD-40, AoBest, John Deer, Caterpillar, Fram, Castrol, Hastings, SKF SCOTSEAL, etc. 
 
Target Markets:
Import/Export, Various Small Auto Shops Throughout the Country. 
 
Sales Opportunity:
Our company has been in operating in Haiti since 2014, supplying commercial truck parts to various companies throughout the country to meet the needs of their fleet vehicles. We are looking for sales reps/distributors that have experience in the Caribbean commercial truck parts market,
 
Company ID: 98288 - Click Here for Full Details
Product Lines:
We Manufacture/Fabricate Product Displays, Branding Products, LED Signage, Printed/Silk Screened, Direct to Substrate, and Solvent Printed Point of Purchase Items.

We are a Custom Shop. Our Expertise is in the Acrylics and Plastic Industry. However, we do Create Mixed Material Displays. 
 
Target Markets:
Our Displays and Branding Materials are Utilized by an Infinite Amount of Industries. We Make Products for Cosmetics, Sporting Goods, Electronics, Footwear, Vape and CBD, Clothing, Sunglass, Hair and Nail, Phone Companies, Home Goods, Music, etc., Retails Stores, Start-Ups. 
 
Sales Opportunity:
We are putting together a team of outside sales reps to work directly with our company. We are the source. We have everything in house to create state of the art displays signage and branding products. No matter what industry you rep, they need displays, signage, and image building products. You have great potential to build in the profits you deserve. Our company has been in business for 10 years at the same location.
 
Company ID: 110320 - Click Here for Full Details
Product Lines:
PCBs - Printed Circuit Boards:
Single Side - SS, Double Side - DS, Multilayer PCB, Multilayer Boards, MLB, ML4, ML6, ML8, ML10, ML12.
Thermal Management Heatsink Metal Core PCB, (Al/Cu) Multilayer Metal Core Aluminium PCB, RF Application Boards, Rogers, Taconic for RF Amplifier, Filters & Antenna. 
 
Target Markets:
OEMs, EMS, CMS
Power Electronics
Automotive
Consumer Electronics
Lighting
Computer & Business Equipments
Defence & Aerospace
RF & Communication
Instrumentation & Medical Electronics 
 
Sales Opportunity:
Sales Reps Required to Work on Commission Basis! We are looking for "Great Sales Reps* who will work for commissions only.

Our company is a leading PCB manufacturer in India exporting PCBs to USA, Europe & Israel. We are a One Stop Solution and can support for Prototype, Quick Turn PCBs, High Mix Low, Medium or Large Volume Production of Bare PCBs. We have capabilities to manufacture PCBs up to 12 layers to very demanding specifications. We are in process to set up a sales office in US to support reps for day to day operations.

We can support for Single Side, Double Side, Multilayer, Metal Core, and RF & Comms grade Rogers PCBs. We have representatives in the US & Europe and are looking to further expand our network via representatives. High Quality PCBs and On-Time Delivery are key to our success over these years. Service you can trust.

We are looking for knowledgeable, experienced candidates or companies who can offer local support for customers and grow our business working on commission basis. Sales Representative to work to expand the existing tried and tested business and bring growth and earn commission. Interested candidates may please submit a sales inquiry to us immediately.
 
Company ID: 113467 - Click Here for Full Details
Product Lines:
Gaskets, Seals, Waterjet Cutting Services, Prototyping. 
 
Target Markets:
Small Engine, Automotive, Medical, Military, HVAC, Industrial, Recreational Vehicles, Agricultural, almost any Industry or Market. 
 
Sales Opportunity:
Our company has never used sales reps before. We know that our reputation will yield great results when partnered with a seasoned and experienced Sales Rep. Our high tenured operations and admininistration have built our fantastic reputation in the gasket industry. Our competitive advantages: Great reputation, great team of folks that get the job done, can produce large volume and small volume. We use lean manufacturing practices and are ISO Certified.
 
Company ID: 113465 - Click Here for Full Details
Product Lines:
Machined Ductile, Gray, and Aluminum Castings and Forgings, Screw Machined Parts. 
 
Target Markets:
Buyers in the Automotive, Heavy Truck, Agriculture, and Industrial Industries. 
 
Sales Opportunity:
Family owned and operated non-union production machine shop with sales of $7,000,000 in 2017. Excellent finanical position with very little debt. Looking to increase sales with the use of outside sales reps. We have open capacity for immediate business.
 
Company ID: 113464 - Click Here for Full Details
Product Lines:
Custom Metal Fabrication Using CNC Press Brakes, CNC Plasma Tables, CNC Shear, and Expert Welding Abilities, Specialize in Weldments Up to 25' long. 
 
Target Markets:
OEMs in the Material Handling, Industrial Parts Using Low Volume High Mix Ccomponents. 
 
Sales Opportunity:
Best in class quality and delivery, highly skilled and motivated workforce with a customer first culture. Design engineering and installation services also available.
 
Company ID: 113455 - Click Here for Full Details
Product Lines:
We Manufacture State of the Art Pressure & Temperature Sensors and Level Sensors. 
 
Target Markets:
We Typically Sell to OEMs, Aerospace, Defense, Process, Oil and Gas Industries. 
 
Sales Opportunity:
We have been in business since 2009 but have been focused primarily on a large contract with NASA to develop a SOTA sensor for Mars. We are now ready to expand and are looking for reps. We offer very competitive commissions and are willing to assist and train reps.
 
Company ID: 107098 - Click Here for Full Details
Product Lines:
Metal Bar/Section Shears for the Forging and Mass Production Industries.

We are the Only Company that Shears Metal Bars and Cross Sections such as: Flats, Angles, Extrusions, etc. with our Original Patented Tool Units. These Units are then Assembled into Economical H-Frame Presses. 
 
Target Markets:
Forging Manufacturers for Auto/Trucks, Aircraft/Aerospace, Bolts/Fasteners, Agriculture/Mining, Oil/Gas, Valves/Fittings, etc. also Metal Suppliers, Construction Angles. 
 
Sales Opportunity:
Our bar/billet shears produce non-shock, quality square faced cut bars (required in the forging industry) without saw scrap, costly saw blade replacements and in greater speed/quantities.
 
Company ID: 112105 - Click Here for Full Details
Product Lines:
We are a Job Shop Specializing in Precision Sheet Metal Fabrication for Food Service Products, Telecommunications, Computers, Gaming, Electronics, Banking and Medical Industries.

We Fabricate Anything from Small Flat Parts to Large Complex Assemblies. Located 20 miles outside of Chicago, IL. 
 
Target Markets:
Banking
Computers
Electronics
Food Service
Gaming
Industrial
Machinery
Medical
Military
Railways and Trains
Telecommunications
And any other market that requires sheet metal parts. 
 
Sales Opportunity:
We offer 10% commission. Established in 1967 our company has Developed into a Proven Leader in the Sheet Metal Fabrication Community. The most modern and high-tech systems and equipment are utilized, with a facility large enough to support and process our customers finishing, assembly, and JIT programs.

• Metal Fabrication Capabilities: Small Components, Large Components, Assemblies.
• Fabrication Method: Laser Cutting, CNC Punching, Forming, Polishing, Welding, Hardware Insertion, Assembly, Finishing.
• Materials: Aluminum, Cold Rolled Steel, Galvanized Steel, Hot Rolled Steel, Stainless Steel.
• Raw Material Forms: Sheet, Plate, Bar Stock, Tubing.
• Material Thickness: Min .020" to Max .5", Maximum Length: 120", Tolerance (+/-): ±.003".
• Additional Services Provided: Assembly, Painting, Plating, Silk-Screen, Storage.
• Production Volume: High Volume, Low Volume, Medium Run, Prototype, Short Run.
• Lead Times: 3 - 5 weeks, Lead Times for Quote: 24 hours.

We invite any sales reps that have experience in this industry and are confident they can help us expand our customer base.
 
Company ID: 113415 - Click Here for Full Details
Product Lines:
Noise Wall Barriers for Applications on Federal, State, and Local Municipalities.

Our Panels are only 11.5 lbs per Square Foot and we can Ship Twenty Panels per 53' Flat Bed Truck. This Product is truly Changing the Panel Industry. 
 
Target Markets:
Our Representatives will be Calling on Local DOT's Heavy Highway Contractors and Civil Engineering Firms. 
 
Sales Opportunity:
Territories are now available throughout the United States and Canada. We will provide all engineered shop drawings.We are a commissioned structure. Our Patented reflective wall design this the only panel system in the world that can span twenty four feet in length by eight feet in height and have a man door already installed into the panel.
 
Company ID: 112904 - Click Here for Full Details
Product Lines:
Streaming Media Service:
500+ Channels, Sports Channels, Spanish & Filipino Channels, Children Channels, On Demand HD Movies, and Pay Per View at No Extra Costs.
No Contracts, No Credit Check, 30 day 100% Money Back Guarantee.
Free Trial - Try Before You Buy. 
 
Target Markets:
Market 1 - Retailers/Non Profits (Program Increases Business Bottom Line Profits)
Market 2 - Sales Professionals (Build a Sales Team)
Market 3 - Individual Referrals - (for People With No Sales Experience)

Work One Market or All Three - the Choice is Yours! 
 
Sales Opportunity:
Every Salesperson's Dream - having the Best Product at the Best Price!

Subscribers:
Refer other subscribers and receive $10 every month, as long as they remain active. Refer 5 now streaming is free - refer more and make extra money.

Directors:
For every business enrolled in the retail program you receive $100, plus $2.50 for every subscriber who enrolls through the retailer, every month.

Whether you want to refer others, work the retail business, or build a sales team, all three methods provide residual monthly income. The income potential is unlimited. Team Environment with Training, Support, Tools, All Provided. Paid Daily! If you've been looking for a way to make big money and you're willing to work for it, please submit a sales inquiry to reach out to me. I will email you more information and then we can discuss in more detail after you have reviewed.

New Announcement - We Are Going Global!
 
Company ID: 113122 - Click Here for Full Details
Product Lines:
Mobile Customer Engagement, Monetization, & Messaging App, Website Design, & Development, Texting Solution:
- Mobile eCommerce
- Mobile Coupons
- Loyalty Rewards
- Mobile Clienteling
- Geo-Targeted Push Notifications
- Surveys
- Online Reviews
- Viral Messaging
- Events
- Social Media 
 
Target Markets:
1. Restaurants, Bars, Clubs
2. Hotels
3. Auto Dealerhship
4. Retail
5. Non-Profits
6. Any Businesses 
 
Sales Opportunity:
- Mobile eCommerce Increase sales and conversion rates by selling products and services directly inside the retailer-branded mobile app.
- Mobile Coupons increase customer spend, drive in more traffic, and grow business through referrals.
- Loyalty Rewards foster loyalty and reward customers for making frequent visits and purchases.
- Mobile Clienteling Messaging improve customer satisfaction and recovery by allowing customers to make a request, share a concern and make a suggestion.
- Geo-targeted Push Notifications enhance the customer experience by sending captivating pop-up alerts to shoppers smartphones.
- Surveys Capture critical customer insight on their experience and satisfaction.
- Call for Action achieve your goals by prompting customers with a specific call-for-action i.e. make a purchase, redeem offer, attend special event, etc.
- Online Reviews increase reviews by digitally prompting customers to quickly and easily provide a review with one touch of a button.
- Viral Messaging Send promotions with incentives your customers want to share with their friends & colleagues i.e. specials, contests, and new products & services.
- Social Media integrate with social networks such as Facebook, Twitter, Pinterest, YouTube, etc.

As a Sales Rep:
A) Receive up to 50% ($250) commission on every sale.
B) Will continue to earn 50% for recurring every year on customer renewal of our services.
 
Company ID: 113390 - Click Here for Full Details
Product Lines:
Anemometers, Duct Air Leakage Testers, Flow Hoods, IAQ Monitors Particle Counters. 
 
Target Markets:
HVAC, Cleanroom, Industrial Flow Testing. 
 
Sales Opportunity:
Our company has delivered the best measurement solutions with its products and services that adapt precision measurement technology for fluids and particles. We are contributing to technological innovation and quality improvements for the processes of quality and environment management.

Sustaining human well-being in the areas of environment, health and energy have always been a primary focus of our company. We develop leading technology with the goal of maintaining health and safety in industries including automobile, aerospace, semiconductor, electronics manufacturing, heavy industry, steel, shipbuilding, pharmaceutical, biotechnology, food processing, medical, construction and civil engineering.
 
Company ID: 113368 - Click Here for Full Details
Product Lines:
CNC Milling Capability
16” x 12” x 10” Mill
40” x 20” x 20” Vertical Mill
22” x 22” x 26” Horizontal Mill with 4th Axis & 15,000 RPM Spindle
CNC Turning Capability
17” Diameter Max. Turn x 32” long
Dual Spindle with Live Tooling and C Axis
Saw Cutting, Manual Mill & Lathe 
 
Target Markets:
Industries that need Machined Parts such as: Aerospace, DOD, Auto Manufacturers, Racing, Heavy Equipment Manufacturers. We do Work for industries such as: NASCAR Race Teams, Daytona Prototype Racecars, Heavy Earth Moving Equipment, Utility Trailer Manufacturers, Motorcycle Race Teams, Water Pump Manufacturing, etc. 
 
Sales Opportunity:
We are a state of the art machine shop looking for a representative to generate sales of our machining services to potential customers. We need someone to sell our skills and services to industries that require our services. We work with Aluminum, aluminum bronze, stainless steel, steel, titanium, tungsten, acrylic and delrin.
 
Company ID: 113354 - Click Here for Full Details
Product Lines:
Branded Digital Two Way Radios and Accessories, Repair Services on All Major Brands ie; Motorola, Kenwood, Icom, Vertex. 
 
Target Markets:
Petrochemical, Gas and Oil, Agriculture, Lumber, Healthcare, Construction, Schools, Safety and Security, Manufacturing, Distribution, Warehouses, etc. 
 
Sales Opportunity:
A well known brand name that is well received when comparing the products in price, performance, and after sales support against the industry leader which is Motorola. These products are sold factory direct so the price points are usually 30% less than the equivalent Motorola product. Sales representatives will be compensated fairly based on performance.
 
Company ID: 110374 - Click Here for Full Details
Product Lines:
Turnkey Custom Tool Kitting Services for Drawers, Boards, and Cases.

From the Simple to the Complex we have been Custom Tool Kitting since 1995! 
 
Target Markets:
Manufacturing, US Military. Commercial Equipment Manufacturing Facilities including but not limited to Agriculture, Wind Turbine, Mining, Highway Construction, Aircraft, Train, Oil Rig, and Drilling. 
 
Sales Opportunity:
Our free sample board is an incredible conversation starter. You will have more fun and get more customer engagement by showing our samples than most products you have been associated with. When you put our sample in your customers' hands they will immediately "get it". Our custom kitting services are currently being used in every branch of the US Military, aerospace manufacturing, mobilization, and homeland security surveillance. Our non-military related manufactures include the worlds' largest consumer brands.

* Free 8" sample boards
* Free 15-piece prototype drawer

We use high-end, 4 lb. closed cell, cross-linked polyethylene foam with a contrasting 1/8" PVC yellow backer. Complete laser etching services for both tool and tool cavity available. Submit a sales inquiry to us today for free samples and full color brochure to learn how you can have more fun and make more money selling an exclusive, one-of-a kind product!
 
Company ID: 113351 - Click Here for Full Details
Product Lines:
A Line of High Quality Sporting Goods including Plastic Bats and Balls, Aluminum Bats, Soccer Balls, Footballs, and Basketballs with Trademarks and Logos of Various Automotive Companies. 
 
Target Markets:
Auto Parts Chains such as: AutoZone, Advanced Auto Parts, O’Reilly Auto Parts, Pep Boys, Independent Auto Parts Stores, and Factory Authorized Car Dealerships. 
 
Sales Opportunity:
This product can also be offered to all large retail and sporting good stores and discount stores.
 
Company ID: 113305 - Click Here for Full Details
Product Lines:
OEM Replacement Dipstick for Automotive Enthusiasts with Performance Vehicles who Require Accurate Measurement of Oil Level. 
 
Target Markets:
Auto Parts Retailers, Performance/Speed Shops, Auto Dealerships, Automotive Manufacturers who Offer Performance Models. 
 
Sales Opportunity:
Our company has developed and Patented a high-end replacement dipstick for auto/truck engines. One feature of our product is cosmetic in that it replaces the yellow plastic handle dipstick used in all current production cars and trucks. More important though is its functional benefit. All cars/trucks produced since 1975 have mandated positive vented crankcases (PVC) which requires all connection to the crankcase be sealed including the dipstick.

The dipstick connection is sealed by an O-ring on the dipstick head. This O-ring seal skews the oil level indication on the OEM dipstick due to an syringe effect when the dipstick is pulled out resulting in an inaccurate oil level measurement. Our Patented design provides a push button on the head of the dipstick which vents around the O-ring seal eliminating the syringe effect and providing a accurate oil level measurement, every time.
 
Company ID: 113169 - Click Here for Full Details
Product Lines:
Our Company Helps Companies, Start-Ups to Fortune 500's Develop New Products.

Our Services include: Conceptual Storyboards and Marketing Presentations, Industrial Design, Mechanical Design, Mechanical Engineering, Electronic Design, Prototype Services, Documentation, and Sustaining Engineering. 
 
Target Markets:
We have been Fortunate to have Designed Products, Built Prototypes, and Helped our Clients Secure IP Across a Wide Variety of Industries.
Such as: Medical, Dental, Food Service, Industrial, Consumer, Sports, Automotive, Aerospace, Recreational, Marine, and Agricultural. 
 
Sales Opportunity:
This is a great opportunity for a sales representative to use our services and design expertise as an opening to sell other products to these companies. As part of our team you will have an inside edge and truly understand the clients needs for other purchased products.

We value your efforts as a sales professional and our commissions will reflect this. We look forward to creating a lasting relationship that will be enjoyable and beneficial for everyone involved. We will provide excellent service to the clients you refer so that repeat business will be assured for many years into the future.
 
Company ID: 113023 - Click Here for Full Details
Product Lines:
Total Business Mobile Marketing System

Mobile Proximity Marketing is the New Way. People Look their Phones 150 Times a Day, 97% Text, and only 2% of Businesses are Currently Using Proximity Marketing to Androids & iPhones with NearBy Targeted Ads. We Need B2B Reps & Managers! 
 
Target Markets:
Every Business small or Large, Retail, Food, Travel, Sports, Non-Profit, Religious and Educational Institutions will Benefit from Mobile Proximity Marketing. This is a Wide Open Global Market. No Selling, Just Telling. Business owners say Yes because they Need New Ways to Market to their Customers. 
 
Sales Opportunity:
We have been providing small businesses mobile advertising systems for several decades. With the NearBy technology and the ability for any business to advertise to cell phone users, you now have the opportunity to capitalize on the hottest advertising products on the market.

We also have taken the need to know and make the technology work. Our company does all of the programming, designing, and reporting analytics to the business. All they do is buy the Mobile Ad System from you and we do all the work. Online, offline, global sales. Our reps have had overwhelming success when they tell the business owner that they can advertise 24/7 for nominal prices a month.

Realistic First Year Earnings of $50,000 to $125,000 or more. You can earn commissions of $748 per sale. Plus, you can earn hundreds or thousands per month, every month on the same merchant with Residuals! Agents can easily sell 10+ deals a month. We provide all training, sales material, support, & management to be successful. Management opportunities are also available.

Our product packages include: a device for keychain/pocket marketing when you are out and about and one for indoor retail out door marketing. Each beacon has a back office that retail owners can see how their ads are being clicked on and viewed with detailed analytics. Our pricing is affordable for businesses and lucrative for sales reps. A winning combination. Out of the Box solutions for the businesses that are revolutionary.
 
Company ID: 113283 - Click Here for Full Details
Product Lines:
Tiny House Type Unit for Citizens and Municipalities. 
 
Target Markets:
Selling to Government, Churches, and Citizens. 
 
Sales Opportunity:
Selling unique units. At the head of a fat fast trending industry. The product sell solves problems. Company has a passion for veterans and the underserved. Commission is 6%.
 
Company ID: 113265 - Click Here for Full Details
Product Lines:
Our Product is a Patented Tool Manufactured in the US.

It is Designed to Clear the Drains in Any Vehicle that Features a Sunroof, Preventing Water Damage to the Interior of the Vehicle. 
 
Target Markets:
Automotive Enthusiasts, Auto Parts Stores, Mechanics, Car Owners, DIY Folks, Essentially Anyone that Owns a Vehicle, Foreign or Domestic, or Works On, Vehicles that Feature a Sunroof. 
 
Sales Opportunity:
This is a tremendous opportunity because there is simply no tool specifically designed to clear car sunroof drains available anywhere. Most people that have a problem with water coming into their car due to clogged sunroof drains either have to bring their vehicle to a body shop or mechanic and have it cleared with compressed air.

This is time-consuming, inconvenient, and expensive for the vehicle owner, or try to do it themselves with homemade devices that may or may not work, and that may damage their vehicle. It is designed and manufactured in the state of Louisiana, USA. It is Patented. This was first produced in 2017, and has been sold locally with great success. We now want to make this available nationwide.

It is made of steel cable-rope, vinyl-coated to prevent damage to the vehicle, and will last a lifetime. It is super-simple and easy to use, and has a lifetime replacement warranty. Easy-to-follow instructions allow anyone to safely and effectively clear the drains in their sunroof, preventing expensive damage to their vehicle. And it only takes a few minutes to do.

There are currently 26.5+ million vehicles manufactured since 2012 in operation in the U.S. that feature a sunroof. Each year 5.6 million vehicles are sold in the U.S. with a sunroof. Millions of vehicles sold prior to 2012 are still in operation and feature a sunroof. The market is tremendous, and so is the opportunity for you.
 
Company ID: 111396 - Click Here for Full Details
Product Lines:
State of the art Industrial Surface Cleaning Equipment with High Pressure, Wastewater Recovery, Patented Filtration, and Recycling of the wastewater for Continued Cleaning.

Compact Footprint Coupled with a Smart Design and Best in Class Componentry Sets our Equipment Apart from the Competition. 
 
Target Markets:
Facility Maintenance companies, Environmental Services, Emergency Response Recovery, Municipalities, Ports, Airports, Petrochemical, Food and Beverage Manufacturers, Resorts and Theme Parks, Service Contractors, Equipment Rental Companies. 
 
Sales Opportunity:
We designed a highly engineered system with a proprietary (patent pending) filtration that allows the effective cleaning of facilities and allow Zero wastewater to escape. Exceed all EPA wastewater regulations.

We recover at point of contact, filter and recycle through for continued cleaning. Every aspect of the equipment was designed for the industries we sell to for staying compliant with all wastewater regulations. We currently have no real competition with the same capabilities. Our products range from $80K to $165K.

We have several drivetrains including a gas fueled injected V Twin 7x12' tri drive trailer unit. Coming next quarter is a state of the art Hydro Drive Power Take off Truck mount platform. Nothing like it in the industry. Our Filtration is the Key Component that makes our equipment best in class.

Our commission structure is highly competitive as is our commitment to our sales agents and our customers. We are a new company but have built a solid foundation with thousands of hours of real world paid testing. So far every City, Airport, and client that has seen our equipment has had high praise for the design and quality. We will support our sales reps with everything needed to present the opportunity and will have an internal support for technical questions and service.
 
Company ID: 113093 - Click Here for Full Details
Product Lines:
Three, Four, and Five Axis Milling of Complex Parts.
3D Surfacing Capability
Turning Capability up to Ø30''
Swiss Lathe Capacity up to Ø1-1/4''
Ability to Work with Difficult to Machine Materials. Ability to Work Directly from Customer Supplied CAD Models. We are Certified to ISO9001 and AS9100. 
 
Target Markets:
We Primarily Serve the Aerospace Market. We also Serve Manufacturers of Castings, Conveyor Systems, Hydraulic Manifolds, and Small Cylinders. We Specialize in Solving Problems Caused by Difficult to Machine Materials and Developing Processes to Simplify Complex Parts. 
 
Sales Opportunity:
Our company is a clean state of the art manufacturing facility that maintains industry certifications that most other suppliers don't have. We utilize an ERP system for all job information, we maintain our cad / cam software to the latest revisions and have a knowledgeable staff to promptly interact with our customers. Our equipment is state of the art and is all less than 10 years old.

We offer quick turnaround on quotes as well as the technical expertise to be able to help our reps with the difficult questions that arise in this industry. We offer a commission based incentive package that is based on the shorter run/higher dollar value parts that we produce.
 
Company ID: 113216 - Click Here for Full Details
Product Lines:
Fastener Retainers.

We Offer a new Unique Retainer System for Bolt Retention. 
 
Target Markets:
Automotive, Industrial, Defense, Aerospace, Heavy Trucks. 
 
Sales Opportunity:
We offer a new unique bolt retainer system. Our system uses a chemical bonded thermoplastic to create a soft pliable retaining ring. This ring holds the bolt in place before assembly and during transit. No tooling or equipment required, no change in torque and clamp load, harmless to engine components and fluids, precise tolerances and high visibility color.

Only several competitors in the industry and our retainer is Lower cost than anyone. Automotive Approved and Certified, ISO certified, Minority certified company (MBE). Commonly used on powertrain, body assemblies, oil pans, valve covers, alternators, generators, water pumps, electronic devices, hevac systems.
 
Company ID: 113213 - Click Here for Full Details
Product Lines:
Drill Bushings, Dowel Pins, Specialty Cutting Tools, and much more. 
 
Target Markets:
Aerospace, Automotive, Manufacturing Industries, and more. 
 
Sales Opportunity:
Looking to grow your line with a quality dependable product with a family run company that has been around for 100 years? A customer-centric and sales driven manufacturer is looking to grow our distribution channel. Our company is proud to provide independent representatives with the quality products and support that you need to be successful.
 
Company ID: 113194 - Click Here for Full Details
Product Lines:
We are a CNC Machining and Turning Manufacturer.

We are Specialized in the Production of Precision Parts. We are a Hong Kong Registered Company with Branch Office in Shenzhen and factory in China. Staffed by a Highly Qualified Team of Design, Production, and Quality Engineers. 
 
Target Markets:
Companies in the Aerospace, Medical, and Industrial Segments that Needs CNC Machining and Turning Parts for their Products. 
 
Sales Opportunity:
Our company have strong engineering support and capable in making complex parts at a competitive price. We also have experience working on turnkey projects including die casting, plastic injection molding and sheet metal stamping. We have been supplying products to various listed companies in the US. Marketing materials will be provided to you for promotion. Generous profit sharing scheme up to one third of the net profit will be awarded for sales order closed. Commission will be calculated as long as there's an order.
 
Company ID: 79304 - Click Here for Full Details
Product Lines:
A Unique Nylon Swivel Belt-Clip for Two-Way Radios. 
 
Target Markets:
Anybody that Uses the Motorola ASTRO XTS 3000-5000 Series Portable Two-Way Radio, Motorola Radio Dealers, Uniform Shops, Public Safety, Police/Fire Departments, Military and any Industrial Radio Users, Utilities, Airport TSAs, Private Security, Firemen, Coast Guard, Training, Businesses, Admin Attire. Anybody who Needs to Carry a Two-Way Radio. 
 
Sales Opportunity:
Our product is an affordable $27.95 Add-On radio accessory. Designed for Detectives, undercover investigators, command staff, firemen, and those in training or Admin attire. Replaces Original Cumbersome OEM Straight Belt-Clips. Allows your radios to swivel out of the way when met with obstructions. It is Useful for anybody needing a comfortable effective carry solution for their two-way radio.

My wife and I own this company and we are both LAPD officers, we both have an interesting personal and law enforcement backstory that helped initiate the development of our product. Our story made national news and media over a period of several years starting in 2006 and I believe adds a good credibility factor to us as manufactures in the public safety product field. I also think this will be very helpful in opening conversation and sales discussions. Commission Sales Representatives needed.
 
Company ID: 113159 - Click Here for Full Details
Product Lines:
Graphene Heated Construction Products, Warming Panels for Pet and Farming, Heated Outdoor Wear, Vessel Heating (Coated Beakers, Water Containers, Pots and Pans etc.), Can Boil Water with Low Voltage, Ultra Thin Heat Film. 
 
Target Markets:
Health and Beauty Brands
Construction
Landscape/Hardscape
Automotive
RV
Marine
Container Housing
Tiny Homes 
 
Sales Opportunity:
We are a catalyst for manufacturers to expand their product offerings substantially utilizing our technology and products in creating additional products or brand as an outsourced supplier, or integrating the technology into their own production process. This involves establishing a relationship at very core levels.

These include but are not limited to:
• Research and Development with scientists focused on developing or refining technology suited to the Client’s market opportunities.
• Provide private branding and full manufacturing process and delivery where desired or Integrating the refined products into the Client’s production and automation process.
• Support the Client’s manufacturing capacity if desired.
• Licensing the Client to produce our proprietary technology if desired.
• Providing automation systems and QC oversite to set up production lines.
• Support the Client’s marketing efforts in international markets where we have influence and where the Client wishes to expand.
• Our company is looking for sales reps in a variety of industries to help support our mission.
 
Company ID: 113133 - Click Here for Full Details
Product Lines:
Wheel Alignment Measurement Systems, Wheel Alignment Lift Racks, Multi-Point Vehicle Inspection Systems, Wheel and Tire Service Equipment, and Brake Resurfacing Lathes.

Our Award-Winning Team of More than 75 Engineers and Support Staff is Unequaled in the Industry. 
 
Target Markets:
Auto and Truck Dealers, Tire Shops, General Repair Shops, Education Facilities, Government Entities, and Auto Body Repair Shops. 
 
Sales Opportunity:
Our company is considered an industry leader. We manufacture, and we sell domestically and internationally. We field the largest dedicated sales and service force in the under car service industry with approximately 380+ sales representatives and 390+ independent service representatives throughout the United States.

Representatives have an extensive network of support from Technical and Training Representatives as well as Customer Service Representatives available to provide account assistance, product information and technical support. Customer satisfaction is key to our success. Every Sales Representative starts with a 5 week training program at our St. Louis headquarters and then continues their education via an annual 3.5 day continuing education course in St. Louis annually.
 
Company ID: 113090 - Click Here for Full Details
Product Lines:
We Manufacture Power Supply Cords/Cord Sets, Overmold Different Sizes, and Shapes of Connectors such as MS/BNC/D-Sub, SAEJ928, & Strain Reliefs, Coil Cords, Wire Harnesses, & Cable Assemblies.

Our Molding Capability gives us the Opportunity to Custom Design & Build almost any Special Connector. 
 
Target Markets:
Any OEM that Requires Electrical Energy in Medical, Electronics, Appliance, Aerospace, Industrial, Transportation, Lighting, Food Processing, or agriculture. The List is Endless. We also Sell through Distribution for Repair and Maintenance Markets. We do Sell Direct to Hospitals on Specialty Products. 
 
Sales Opportunity:
We can make or buy many of the power cords we sell today. This allows us to compete with offshore suppliers and/or build a quantity stateside to meet immediate needs. We have found that working thru engineering allows us to get our products designed into new projects and attain a sole source position. We have been in business for 42 years and have an extensive background in connectors and cable. If we do not make it we can buy and resell it.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2019
LINKS | SITE MAP | TERMS OF USE