Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Transportation\Aerospace / Aviation
Click on Company ID to View Full Details
Company ID: 28698 - Click Here for Full DetailsUpdated
Product Lines:
US EPA Tested, Award Winning Green Product.

Performs Multiple Jobs in One Step. Eliminates Solvent, Acid, Phosphate, Chromate & Blasting from the Metal Surface Preparation Process. Completely Prepares the Metal Surface for Welding and Finishing. Provides Years of Indoor Rust Protection. 
 
Target Markets:
Metal Fab, OEM, Car Part Manufacturer, Machine Shop, Stamping, MRO, High Temp. Coating, Rebar coating, Industrial Supplier, Painting, Powder Coating, Welding, Steel Tank Manufacturers, Pressure Vessel, Media Blasting, Defense, DOT, Marina, Construction, Utility, Oil & Gas, Mining, Agricultural, etc. 
 
Sales Opportunity:
Looking for Sales Rep in USA, Canada & Mexico. Exclusive Distributor for other countries. Huge market with no competition.

Product developed & Made in USA. Complete "Green Technology & Process". Good Commission rate. Complete Product Training & Technical Support will be provided along with free Product Sample, Brochure, etc. This is the only Conversion Coating which performs multiple jobs in one step and works on any Ferrous & Non-ferrous metal at room temperature without rinsing. Complete metal surface preparation in one step. Eliminates blasting of new metal before Priming/Painting, High Temp. Paint, Powder coating, etc. Provides much better quality results.

The sales Rep must be familiar with Metal Surface Preparation before Finishing such as Priming/Painting, Powder coating. The product has Zero Waste Disposal. Completely solves the Rusting & Long-Term Rust Protection problems, Welding & Adhesion failures. Increases weld strength considerably in steel & Anti-spatter. Eliminates one or more steps from traditional processes, saving a lot of labor, time & cost. Zero Product Cost after use. No EPA or OSHA regulation. Zero Welding & Zero Paint Adhesion failure since 1998. Zero Re-Work. Indefinite Shelf Life.

Our product is being used by major companies, such as OEM, DOT, Military Metal Fab., Aerospace, Automotive Aftermarket, Mining, Boat manufacturers, etc. It has been used by Lockheed Martin, Goodrich Aerospace, Bechtel International, DOT TENN, SpaceX, etc.
 
Company ID: 116090 - Click Here for Full DetailsNew Profile
Product Lines:
High Performance 100% Biodegradable, Non-Flammable, Food Safe, Non-Toxic, Eco-Safe, Penetrating Lubricant that Unlocks Seized Parts, Fights Corrosion, Lubricates and Protects Metals, Cleans and Degreases, Adhesives, Tar and Asphalt Remover, Long Lasting, and NSF H1 Registered. 
 
Target Markets:
Industrial Market with Focus on Metal Drilling, Saw Mills, Asphalt, Oil & Gas, Aerospace, Schools, Municipalities, Food and Beverage Plants, Marine, Welding, Metal Fabrication, Mold Release, Motor Sports, Transportation. 
 
Sales Opportunity:
You will receive an aggressive sales commission paid timely with a bonus program. While we build a re-distribution channel, we have self-distribution through our own truck fleet. We have less than pallet and drop ship program to support distributors initial customers. You sell it, we will get the product to customer! You will get paid!

We have a national marketing program to build brand awareness. This product performs better than silicone and petroleum distillate alternatives. The green and eco-safe positioning meets the sustainability initiatives of large industrial customers. Join our team. Make money! Have some fun! Performers earn great incentives!
 
Company ID: 115986 - Click Here for Full Details
Product Lines:
We Manufacture Precision Steel Molds for Plastics and Metal Injection Molding Requiring very Tight Tolerances.

This Level of Precision can be Translated to Other Products. We Design, Manufacture, Sample, and Run Molds Before Shipping to our Customers. 
 
Target Markets:
Most of the Molds are Made for the Auto, Appliance, Telecommunications, and Medical Industries. We have Certification to ISO9001. Most of our Metal Injection Molds have been Sold to Metal Injection Molders for Appliance and other MIM Applications. 
 
Sales Opportunity:
Precision machining is a core competency that we have effectively applied to electrical connectors for molds for a number of industries including auto, appliance, telecommunications and medical. We have also been successful in applying this expertise to medical devices, precision end of arm tooling and fixturing. Our services include laser engraving with graphics and steel polishing achieving A-1 & A-2 finishes.

We are looking for representatives with a technical expertise and market knowledge of manufacturing in the areas outlined above. Our expertise in machining can also be applied to the aerospace industry. Our plastics molding plant is currently working to certify to IATF16949 by year end.
 
Company ID: 9232 - Click Here for Full Details
Product Lines:
New Landing Gear Developed for a High Production Drone is now Available to Both Commercial and Military Aircraft.

Lighter, more Reliable, Less Maintenance, & Less Expensive than Current Landing Gear. We also Supply Hydraulic Dampers, Tail Hook Centering Mechanisms, Tail Skids, etc. 
 
Target Markets:
Military and Commercial Aerospace, Lockheed, Boeing, Northrop Grumman, Piper, Cessna. 
 
Sales Opportunity:
65 year old company is expanding into new markets. Excellent commissions & support. We are known as the top quality "go to" company. We need your help now.
 
Company ID: 115584 - Click Here for Full Details
Product Lines:
Contract Manufacturer of Wire harnesses and Custom Cable Assemblies, Over Molding, Patch Cables, Ethernet, Fiber Optics, USB, Power Cords. Wire Harnesses, M12 Cables, etc. 
 
Target Markets:
Largely Electronic OEMs but we also do very well in Industrials, Automotive, Marine, and some Aerospace. 
 
Sales Opportunity:
We are looking for energetic salespeople to help us grow in new regions! We have a devoted inside sales staff to help our outside reps with everything from design and quoting, to closing the deal and processing orders. Our ideal sales reps would be bringing new customer opportunities, drawings to quote, etc. We pay commission based upon monthly invoices.

You will be given an inside sales contact here and that individual will assist with all new opportunities that you bring to the table including the engineering work if needed, logistics, quoting, etc. so that you are freed up to find the next opportunity. We Build in the Puget Sound Area. We have a full 6 person quality department, engineering staff, and roughly 65 employees overall.
 
Company ID: 115231 - Click Here for Full Details
Product Lines:
We Currently have Capacity Available on 2-1", 6 Spindle Screw Machines.

Both Machines are Equipped with Sub-Spindles so Back Work can be Performed. Capacity Available on our Vertical CNC Mill. (X:24,Y:14,Z: 6). Spot and Projection Welding along with Secondary Operation Equipment are Available. 
 
Target Markets:
Manufacturers
Equipment Manufacturers
Screw Machine Part Suppliers
Part Supply Companies
OEMs 
 
Sales Opportunity:
We have supplied high volume automotive precision screw machine parts as a Tier 3 supplier for approximately 10 years. We are ISO 9001:2008 Certified, and are currently transitioning to ISO9001:2015. We appreciate the importance of quality parts being delivered on time.
 
Company ID: 108293 - Click Here for Full Details
Product Lines:
Custom Manufacturer of Industrial Curtains including Plastic Strip Doors, Curtain Walls, Airport Baggage Handling Conveyor Curtains, Clean Room Curtains, Laser Barriers, and Data Center Hot Aisle/Cold Aisle Containment Systems. 
 
Target Markets:
We provide Industrial Curtains to a range of Industries including Aerospace, Airport, Automotive, Biotech, Clean Room, Cold Storage, Data Centers, Electronics, Medical Device, Pharmaceutical, & others. Sales are Made to End-Users, Contractors, OEMs, and Resellers such as Material Handling Companies. 
 
Sales Opportunity:
Our company takes pride in fabricating custom products to fit the specific needs of each and every application presented to us. The product is delivered in a timely fashion at a reasonable price. Using UPS as our standard carrier, all orders are received no more than five days after they are shipped, at a low negotiated price.

In business since 1978, we use materials of the highest quality and can provide test data in regards to anti static properties and flame spread capabilities for all of our flexible vinyl materials. Our company supports its representatives by maintaining an up to date web and social media presence which along with our participation in trade shows provides qualified leads. Our commission structure of 10% to 25%, based upon product and customer type, affords manufacturer reps a great earning the opportunity.
 
Company ID: 114937 - Click Here for Full Details
Product Lines:
Custom Designed Machines/Equipment such as: Robotics, Semi and Full Automation, Manual Assembly, & Vision Inspection Solutions, etc.for the Manufacturing of Goods.
Machining (Plastics and Metals), Fabrication, and Assembly
Gauge & Fixture Design and Build 
 
Target Markets:
Consumer Manufacturing Businesses: Engineers, Purchasing Procurement, Project Managers, Technicians.
Various Industries: Tech, Consumer Products, Defense, Plastics, Automotive, Electronics, etc. 
 
Sales Opportunity:
We are looking for a sales rep to help us grow our business. We are a automation company located in the heart of the automotive and technology manufacturing center of Ontario. The ideal rep would procure new clients through phone, email, and face to face meetings, with the intent being any new clients submitting RFP/RFQ's for new equipment/machinery or other services offered.

The individual should have a strong background in manufacturing and an understanding of assembly equipment/machinery. They will also be able to pitch various technologies and concepts to potential clients. Contract based on a hourly rate, with commission incentives.
 
Company ID: 114228 - Click Here for Full Details
Product Lines:
Self-Lubricating Plain Bearings, Metal Polymer Bearings, Metallic Bearing Materials. 
 
Target Markets:
Industrial Equipment Manufacturers (OEMs), Aircraft, Aerospace, Medical, Heavy Industry, Process Industry Equipment, Automotive, Heavy Equipment, and Recreation. 
 
Sales Opportunity:
Daido Metal USA is actively looking for representation for our metal polymer bearing product line in numerous regions throughout the United States. Immediate requirement for representation in Southern California, Midwest US, Southeast US and Northeast US. North America sales supported by company direct sales representation/management, distribution center in Ohio and application engineering from our North America headquarters in Michigan.

Technical sales experience to OEMs required. Engineering level sales experience preferred. Our company is a global plain bearing manufacturer with an inherent focus on product quality and performance. We believe strongly in giving our reps the tools to be successful. Product training, in-field sales support, inside sales support, company web presence, trade shows, marketing/advertising, product literature and samples are all provided.
 
Company ID: 114909 - Click Here for Full Details
Product Lines:
Prototype Aluminum, Magnesium, and ZN Castings.
CNC Machined Castings.
CNC Billet Parts - Specializing in Aluminum, Magnesium, and ZN. 
 
Target Markets:
OEMs with Product Development Based in the U,. Defense Companies Needing Legacy Parts that are No Longer Manufactured or Supported, Any Business Needing Machined Parts. 
 
Sales Opportunity:
We specialize in rapid prototyping and low-volume production aluminum, magnesium, and ZN castings. We have a typical turnaround time of 1-2 for the first castings and 2-3 weeks for the first machined casting. Billet turnaround is 3-10 days for first parts.
 
Company ID: 114804 - Click Here for Full Details
Product Lines:
High Precision Japanese Machining for All Types of Parts for Industrial and High Performance Applications. Specializing in High Precision Camshafts. 
 
Target Markets:
Customers with Extremely Tight Tolerance and High Quality Machining Requirements. 
 
Sales Opportunity:
Top of the line products along with an extremely motivated back office support will ensure that your efforts in the field are well rewarded. In addition, we offer an impeccable commission system. Our company is focused on team work to help service the customer in the best possible way. We believe that if our reps are successful, we are successful! We are looking for a win-win partnership.
 
Company ID: 113234 - Click Here for Full Details
Product Lines:
Thermal Mass Flow Meters and Controllers 
 
Target Markets:
Oil and Gas, Chemical/Petrochemical Processing, Analytical, Food & Beverage, Pharma, Automotive/General Manufacturing, Subsea, Industrial Vehicle, Marine, Fluid Power, Bio Tech, Life Sciences, Research Labs, Universities, Energy, Surface Treatment/Coatings. 
 
Sales Opportunity:
Our company AW-Lake ("Vogtlin" brand Thermal Mass Flow Instruments) is seeking additional established Representatives throughout the Americas. We offer territorial exclusivity and generous compensation. We are seeking representation for parts of the Midwest, South, New England, Canada, Mexico, Central and South America.
 
Company ID: 110125 - Click Here for Full Details
Product Lines:
Precision Machining Services, General Machining Services, CNC Lathe, Milling Department. Metal Forms, Wire Forms, Springs, CMM Inspection and Reporting, Heat Treating, Material Certs, Surface Finishing, Plating, Anodizing, and Assembly. Specializing in Tight Tolerance, Exotic Featured Parts. 
 
Target Markets:
Aerospace/Defense, Medical Device Manufacturers, Automotive, Industrial Automation Machinery, Optical Device, and Telecom-Electronics Manufacturers. 
 
Sales Opportunity:
Since 1981, SMI CA has been producing precision components in a wide range of materials including Alloy steels, Stainless Steels, Aluminum, as well as exotic material such as Titanium,Inconel using the latest in CNC Machining and manufacturing technologies. Our company is Certified with AS9100C & ISO9001 International Quality Standard. Applications range from aerospace, defense, medical, automotive, optical device, industrial products, and telecom/electronics.

We are part of an international group (STM) focused on a development of world class manufacturing technologies. STM Group includes Toho Seiko, a world renowned precision spring manufacturer located in Japan. Founded in 1957 in Japan as a specialized manufacturer of springs, received high praise from the industries such as medical device, optical equipment, telecommunications equipment, industrial equipment, automotive, consumer electronics, electronic components, etc. because of its technology and quality. We are the hub of customer service, engineering, and production for the US customers.

Currently, we are looking for the rep in the west coast and the east coast. Great opportunity to be the first rep. to market our services. Our pricing is very competitive and our engineer and production team will make sure the project success. We are looking for the long term partnership with the reps and will pay commission as long as the project last. Please explain why you are interested in representing our company.
 
Company ID: 113914 - Click Here for Full Details
Product Lines:
Precision Ceramic Machining services for over 30 years. Current customers include GE Energy, Lockheed Martin, Raytheon, Agilent & Ball Aerospace.

Our Quality & Manufacturing Systems are Compliant to AS-9003A. 
 
Target Markets:
Aerospace, Medical, Electronic, Energy, Analytical Device Manufacturers, and OEMs. 
 
Sales Opportunity:
Looking for long term relationship with a sales rep that has experience with customers who use contract manufacturing services. Territory is the US, Canada and Mexico. Background in advanced materials helpful. We do not compete with machine shops that machine metals and plastics. We could be a compliment to these types of lines. Most of our success comes from relationships with engineers, providing them with lots of advanced materials know how and knowledge and service. We are a family owned and operated company with lots of loyalty when working with our customers and employees.
 
Company ID: 112592 - Click Here for Full Details
Product Lines:
Oldfloor is an Internationally Renowned Brand Company that has Consolidated its Prestige by its Undisputed Quality of Production of Hardwood Floors.

The Floorboard is Distinguished by its Unique 3 Layer System. The Hardwood is a Solid Plank Available in a Wide Range of Woods. 
 
Target Markets:
Distributors, Contractors, Designers, Architects, Residential Homes/Villas, Direct Sales to Commercial and Cooperate Offices. 
 
Sales Opportunity:
Our beautiful and authentic flooring is hand crafted in the heart of Italy, and its natural wood character and gorgeous finishes are sure to make the impression of a lifetime in any space! All color finishes, whether oiled or varnished, are designed to bring out the best characteristics of the wood which are obtained through multiple processes.

The choices of floorboards gives you from the most natural state of the wood to free of knots and uniform in color. The six types of hand crafting are, Pre-Sanded, Brushed, Borgogna Smoothed, Worn Effect Planing, Hewed Planing and Sawn. Also, Oldfloor is an exclusive manufacturer in the world that has the rights to retrieve the wood piers from the Venice Lagoon to create the most original floors.
 
Company ID: 112016 - Click Here for Full Details
Product Lines:
Technical Consulting, Contract Testing, and Analytical Lab Services.

Manufacturers Representative Company Offers One-Stop-Shop Solutions for Analysis, Characterization, Measurement, Testing of Materials and Devices for Academic, Commercial, Industrial and Governmental Clients. 
 
Target Markets:
B2B Selling to Clients in Every Possible Industrial Sectors: Automotive, Chemicals, Electronics, Medical Devices, Pharmaceuticals, Semiconductors. The Clients could be in Any Phase of a Product Cycle: R&D, New Process Optimization, Failure Analysis, Quality Control, and Legal Investigations. 
 
Sales Opportunity:
We are a nanotechnology service and development company with over 10 years of successful business. It is our ongoing commitment to serve international communities through our broad range of first-class products and services.

Our Nano Analytical and Testing Laboratory provides comprehensive, advanced and critical analyses, measurements and tests of materials and devices. We deliver reliable and quality solutions for clients’ analytical and testing needs whether they are for high-level technical consulting or project driven contract lab services or capital equipment.

Our company is ISO/IEC 17025:2005 accredited! The ISO 17025 accreditation gives our lab international recognition on our testing and measurement competencies. It provides our clients another level of confidence in our excellent quality lab services.

We hope to expand and share our success and growth with commission based sales and marketing professionals and agencies. The instrument products, technical consulting and contract lab service portfolios are well-designed and market-proven solutions to clients' challenges and issues. All we need is to have the messengers to spread the words and to offer the solutions to the needing clients.

Our products are best-value, advanced and high quality. Our lab is equipped with state-of-the-art instruments. Our staff are college educated professionals with many years of experience. We will provide marketing and sales support, and training for your success.
 
Company ID: 101022 - Click Here for Full Details
Product Lines:
AS9100 & ISO900 certified Aerospace manufacturing. CNC Milling and Turning, 5 Axis Milling, Grinding, Manual Operations. Tooling, Molds, Dies, Machined Components, Fixtures, Prototypes to Production, Assemblies. 
 
Target Markets:
Aerospace, Military, Packaging, Automotive. 
 
Sales Opportunity:
Seeking a sales representative for 30 year old company AS9100 and ISO 9000 Certified CNC Machining Company. Looking for someone with contacts in the Aerospace, Automotive, Packaging or any industry that needs machined components.

Die-Verse Tool has a team with over fifty years of combined experience in our CNC milling department. We offer a full range of milling services including CNC milling capabilities of long or short run production parts and 3D contour milling with 5 Axis capabilities. Our team offers experience in jig & fixturing, tool & mold making and prototype tooling.

In addition to standard milling and tool making we are able to provide services that include prototype tryout of molds for the rubber and plastic industry, build and tryout of stamping dies as well as production runs for plastic molded parts and stampings in our facility. At Die-Verse Tool & Mfg. our primary goal is to ensure that our customers receive a quality product reasonably priced with a timely turn-around time. Six CNC Mills, Four CNC Lathes, 20 man shop.
 
Company ID: 60900 - Click Here for Full Details
Product Lines:
PCBs, Flex & Ridged Flex PCB, PCBAs, Box Builds, Front Panels & Assemblies, Wire Harnesses. 
 
Target Markets:
OEMs, ODMs, Contract Manufacturers, Custom Manufacturing, We have been targeting the Electronics Industries, Medical, Aerospace, Telecommunications, Industrial, Automotive, and more. 
 
Sales Opportunity:
Cir-Q-Tek is currently seeking Manufacturing Sales Representatives. Here is an exciting opportunity to work with a US based International company. Our services include design, fabrication, logistics, warehousing, and distribution. Base salary for experienced sales person in addition to a generous commission structure. We provide training and marketing assistance.

Product Lines:
• Printed Circuit Boards & Design
• Printed Circuit Board Assemblies (PCBA)
• Flexible & Ridged Flexible Printed Circuits & Assemblies
• Contract Manufacturing
• Custom Cable & Wire Harnesses
 
Company ID: 88403 - Click Here for Full Details
Product Lines:
Electronic Components, Electronic Assembly, Electromechanical Assembly, Cables, Injection Mold Tooling, Injection Molding, Metal Fabrication, Metals, Precision Plastics. Ceramic to Metal Components, Particle Accelerators, and Associated Components, Complete Turnkey Assembly of Electronic items. 
 
Target Markets:
Automotive Manufacturers, Appliance Manufacturers, Aircraft Industry, Entertainment Manufacturers, Arms Manufacturers, Security Industry, Medical Equipment Manufacturers, Power Industries, Applied Research, and so many more. 
 
Sales Opportunity:
We seek experienced sales reps with a strong following. All areas open. All our products and services are done in our China facilities. Excellent opportunity. Products sell well. Engineering and sales support always available. Multiple sales persons the rep organization a definite plus.
 
Company ID: 106515 - Click Here for Full Details
Product Lines:
Calibration Service, Inspection Service, Repair Service, Metrology Equipment Sales, Precision Tool Sales. Fluke, 
 
Target Markets:
Manufacturers of All Major Industies. Including: Food and Beverage, Medical and Biochemical, Aircraft, Automotive, Transportation, Electronic, Rail, Fasteners, Plastic and Steel. 
 
Sales Opportunity:
Percentage of gross sales based commission, paid monthly.

ISO 9001 & IEC 17025 Accredited manufactures are Required to enlist accredited calibration laboratories. Large, global manufacturers are ideal potential customers. With years of experierence our certified technicians and customer service members offer great technical support when it comes to answering customer questions regarding service and product. Along with the dozens of companies we have partnered with in distribution, Sales representatives will have a full support team to their advantage.
 
Company ID: 111080 - Click Here for Full Details
Product Lines:
Our Firm Designs, Engineers, and Manufacturers Structural Composite Roof Deck Systems.

Our System has been Used for 48 years on Structures from 1,000 sq.ft. to 1,000,000 sq. ft. It is Used on Flat, Sloped, and Curved Roof Structures. Installation is by Licensed and Trained Roofing Contractors. 
 
Target Markets:
Markets are Elementary Schools, High Schools, Colleges and Universities, Elderly Care Facilities, Public Structures (Airports, Court Houses, Fire Stations, Police Stations) and Structures that are Built for Long Term Service. Sales are Made to Architects and Engineers Designing the Structures. 
 
Sales Opportunity:
Our company has the potential to become a reps most profitable account. While it has a lead time since it must be designed in the structure, once designed into the structure it is very difficult to change due to the performance it provides. It has areas of performance that competitive systems can not match. We are a set-up to provide our agents total support on designs and engineering in a timely manner, allowing them to be responsive to the Architect or Engineers questions and needs.

We provide warranties from 10 years to 40 years depending on the system and installers guarantee their workmanship for the same time. This is a unique performance warranty that is unmatched in the industry. Commissions are paid on the number of sq. ft. in the roof deck area plus edge supports details. Our top producers earn six figure incomes annually.
 
Company ID: 110643 - Click Here for Full Details
Product Lines:
Our company Makes Wire Rope Assemblies Up to 1/4" for a Variety of Industries including: Lighting, Marine, Defense, Aerospace across the US. 
 
Target Markets:
Lighting, Marine, Defense, Medical Equipment, Overhead Door, Aerospace. 
 
Sales Opportunity:
We are a small 30+ year family owned company which has never done any sales or marketing. We are looking to significantly grow our business and are searching for a sales partner to help us accomplish this goal. We serve a wide variety of industries and are known for our low prices and very quick turnaround.
 
Company ID: 109866 - Click Here for Full Details
Product Lines:
Recognized Leader in Metal Stampings, Fabrications, Vertical Machining, Welding, Assembly for over 75 years.

Our Company Specializes in Short to Medium Run Metal Stampings, Fabrication, Machining, and Assembly Complement the Product Offering. 
 
Target Markets:
Medical, Aerospace, Agriculture, Automotive, Industrial, Recreational. Our Current Customer Base is National and of High Quality. Reps sell to Global Supply Managers, Product Engineers, and Purchasing Managers. We Currently Manufacture Parts and Assemblies to Major Corporations with Many Current Accounts. 
 
Sales Opportunity:
Represent our product offering on a commission basis. Needs are in the New England area including Western PA, NY, NJ, CT, MA, NH, VT, Maine, MD, DE. There are many existing accounts that are established. I am looking to grow in that market. The selected agency will service two divisions within our company and have an immediate commission base. Our company participates in trade shows and other sales activities to assist in generating leads. This position has the potential to grow the established territory in a very short period of time.
 
Company ID: 107532 - Click Here for Full Details
Product Lines:
We are a Manufacturer of Deep Drawn metal Components as well as Flat Stampings and Progressive Eyelets.

We Specialize in many Different Grades of Stainless Steel as well as Aluminum, Brass, Copper, and many other Steel Alloys. We also Specialize in Tube Fabrication. 
 
Target Markets:
Hardware, Automotive, Electronics, Medical, and a Variety of Detonator Caps for Military Defense as well as Demolition. We also have a Medical Division that Specializes in Producing Parts that are made of many different types of tubing. 
 
Sales Opportunity:
Our company is an ISO 9001:2008 company. Our deep draw division is capable of drawing to depths up to 2.562 (.1008 mm) deep. The deep draw division also accommodates in line roll threading, bulging, and many different types of piercings. Our stamping division has capabilities to accommodate up to .100 (.0039 mm) thick material and specializes in inline tapping.

Within the Medical division, we also specialize in laser cutting, forming, welding, and many other types of processes. Our Manufacturing facility consists of twenty transfer presses and twenty four stamping presses. We have support equipment that gives us the edge on building all tools within our facility in order to capitalize on lead times as well as cost savings.
 
Company ID: 105933 - Click Here for Full Details
Product Lines:
Energy Monitoring Sensors.

We Manufacture Current, Voltage, Power, Frequency, and Power Factor Analog and Digital Transducers. We also Offer Current Transformers, Current Relays, Switches and Displays, Custom Designed OEM Units. 
 
Target Markets:
Engineers, Purchasing Agents, Utilities Companies, OEM, Distributors and End-Users. 
 
Sales Opportunity:
Our company is a privately owned business since 1986. We have over 18,000 customers in our database. Customers provide repeat buisness year after year. Our product offerings cover just about any monitoring needs including DC and if we don't have it our experienced Engineering team can custom design it. We own our own building and manufacture most products here in our St. Louis, MO. facility.

We control our own overhead and expenses to compete in almost any market. We have two SMT circuit board stuffing machines, a laser cutter and UV printer for custom labeling and packaging. Travelling with our Reps to train them and get experienced with our products is a number 1 goal to make both companies successful.

Our customer database is shared with the reps and they are treated as an extension of our sales force. Commission structure is 5% for the territory on standard parts and 10% for custom designed units. Very few house accounts in any territory, although there might be some. We are very fair about making sure our Reps are paid the money they helped earn.
 
Company ID: 104048 - Click Here for Full Details
Product Lines:
CNC Rotary Tool Holders
High Performance Taps
Precision Measuring Intruments 
 
Target Markets:
Distribution
End-Users 
 
Sales Opportunity:
We are a 55 year old Distributor that have developed our owns lines of Toolholders, Vises, High Performance Taps, and Precision Measuring instruments. We sell strictly through distribution.
 
Company ID: 101189 - Click Here for Full Details
Product Lines:
Precision Sheet Metal Fabrication:
-- Design Engineering Assistance (10 Fulltime Manufacturing Engineers)
--> Customer Owns Design, we Provide Best Possible DFM.
-- Mechanical Assembly
-- Light Electrical Assembly
-- Supply Management 
 
Target Markets:
Part of the Core Mission of our Company is to be Diversified Amongst Commodities and Customers within Commodities. Telecom, Aerospace, Security ID, POP, Medical, Racks, Enclosures, Audio/Visual Mounting Systems, Agricultural, Automotive, Defense, and Gaming. 
 
Sales Opportunity:
1. Working Ownership
2. Financially Strong
3. ISO9001:2008 Certified and ITAR Certified
4. Our company believes in creating, sustaining, and supporting long - term relationships. Our core vendor base is made up of "primary" and "secondary" vendors that have partnered with us for the long term.
5. We are not a "one type of fab" facility. Our core strength is DFM, quick-turn prototype, and production fabrication up to any level a customer should require.
6. 110,000 square foot facility, state of the art, and climate controlled.
7. Near zero turn over in skilled positions.
--> In-house blueprint training & math classes in an effort to promote from within.
8. Very strong in design engineering input for best possible DFM.
9. Seven (7) Turret Punch Presses, (6) Lasers (3 are 24/7 FMS Systems, with one being a Fiber system), 26 Press brakes, 12 hardware machines, and all the supporting equipment a facility like ours needs.
10. We have a full weld/spot-weld shop, but we stress riveting due to overall cost, strength, and cosmetics.
11. We lean toward press hardware versus extrude/tap, but we do both, having automated tapping in our turrets and stand-alone automated tapping work stations.
 
Company ID: 116081 - Click Here for Full Details
Product Lines:
Multi-Function Test Equipment that includes: a Spectrum Analyzer, Power Meters, Measurement Receiver, Signal Generator, Tracking Generator, Cable Fault Locator, and many other Capabilities including Protocols Used in Land Mobile Radio (LMR). 
 
Target Markets:
We are Looking for a Rep Company that Specializes in US Federal Government Selling with the Ability to Sell RF Test Equipment. 
 
Sales Opportunity:
We are looking for a firm to sell our industry-leading line of communications test equipment for Land Mobile Radio (LMR) applications to U.S. Federal Government accounts.

We are a fast-growing industry leader in test instrumentation for two-way radios and radio systems, headquartered in Kilgore, Texas where our products are also designed and manufactured. Our communications analyzers are widely recognized as the leading LMR test sets in the market. We have a commanding presence in the commercial, industrial and state & local government markets and are looking for a partner to help us grow our presence in the USFG domain to a comparable level.

The ideal representative will have a deep understanding of USFG procurement, particularly in connection with radio communication and associated test equipment. The representative will also know the key influential individuals and organizations and understand the best way to approach, influence and communicate with them. Our company is looking for a long-term partner to help us develop our USFG penetration strategies and most importantly, to execute those strategies for growth in both the near and long-terms.
 
Company ID: 116059 - Click Here for Full Details
Product Lines:
Metal Stamping Short to Long Runs, Tool Design and Build, Research and Development. 
 
Target Markets:
Automotive, Agriculture, Aerospace, Appliance, Packaging, and Various Industries. 
 
Sales Opportunity:
Seeking commissioned sales rep with over 10 years experience in steel stamping industry. We offer an excellent commission package and flexibility. We are a woman owned manufacturer based out of Chicago area but are a global supplier. We recently acquired a 63 year old stamping house and are excited to grow the business. We are looking for someone to lead this department.
 
Company ID: 116008 - Click Here for Full Details
Product Lines:
Precision Machining, CNC-Turning & Milling, EDM-Wire, Sinker, Drill, Manual Lathes & Mills, Grinders-OD, ID, Surface, Lapping, 3D Printing, Sheet Metal, Full Metrology/Quality Inspection Lab. 
 
Target Markets:
The following Customers are who we market to; Manufacturing, OEM, Medical, Aerospace, Firearms, and pretty much any Facility that has Machining Needs. We are also Open to New Markets. 
 
Sales Opportunity:
Our company offers competitive commission, engineering assistance, and site visits with customers. We have earned a solid reputation for top-quality work, fast efficient service, and competitive prices. We specialize in close tolerance work, both in final part product, tooling, precision gages and fabrication.
 
Company ID: 116017 - Click Here for Full Details
Product Lines:
Surface Finishing & Anodizing Services that Deliver Functionality & Beauty.

Produce Flawless, High Performance Finishes on Aluminum, Magnesium, Steel & Stainless Steel, Copper Alloys, & Zinc Die Cast. Capabilities include a Metal Polishing & Buffing Department, plus Three Electroplating Lines. 
 
Target Markets:
We are an Approved Metal Plating and Finishing Supplier for:
Automotive Manufacturers
Motorcycle Manufacturers
Medical Supplies and Equipment Manufacturers
Electronics Manufacturers
Aerospace Manufacturers
Gaming/Slot Machine Manufacturers
Oil and Gas
Consumer Product Manufacturers 
 
Sales Opportunity:
We are expanding our rep network and looking for motivated independent reps to work on commission basis. All territories are located in North America. You prioritize our products and we prioritize you We believe that if our reps are successful, we are successful! We are looking for a win-win partnership.

Our company has been in business for 60+ years. Quality is the cornerstone of our business. Our unwavering commitment to uncompromising quality mandates that we maintain and continually identify ways to improve product performance. As an ISO 9001:2015 company, this quality commitment extends to our 24/7 laboratory capabilities. We provide tremendous in-house support and work as a team to help you facilitate sales and keep our customers satisfied. Join our team today!
 
Company ID: 116001 - Click Here for Full Details
Product Lines:
Accounting and Bookkeeping Services for Small to Mid-Sized Companies.

All Bookkeeping Services including AR, Collections, AP including 1099s, Payroll Services including Payroll Tax Returns, Sales Tax Returns, Bank Reconciliations, All Financial Reports, Accounting and Business Management Services. 
 
Target Markets:
Manufacturing & Telecommunication. 
 
Sales Opportunity:
We are specialists in the Manufacturing industry. With over 35 years of experience and knowledge of all processes including management and accounting, job costing, HR, Doc Control, Purchasing, Production Control, and Quality Management. We have the expertise that it takes to assist manufacturing companies with any problems that they may have, to improve their accounting processes, provide the financial information, tools, and ideas that they need to successfully run their business and improve their profits.

We would like to find a sales rep on commission basis to start off, to assist our start-up business, use their professional sales tools, give us advise, and to grow with us. This is a perfect opportunity for someone who sells to the manufacturing industry and is wanting to assist a start-up, to help a company grow, with the ability to have their input, and advice to the owners about sales and marketing.
 
Company ID: 115996 - Click Here for Full Details
Product Lines:
European Made Premium Quality Hand Tools with Heavy Emphasis on Safety/Innovation.

Non-Sparking Copper/Beryllium, Aluminum/Bronze, Magnesium/Bronze Titanium, Stainless Steel, 1000V Insulated, Anti-Drop, Pipe and Plumbing, Industrial, Never Offered or Available in the US or Canada.Underwater, ESD. 
 
Target Markets:
Petro/Chemical, Mining, Transportation, Military, Ship building, Railroads, Utilities, Aerospace, Defense, Airlines, Commercial/Industrial HVAC-R, and Plumbing. 
 
Sales Opportunity:
Ground floor opportunity for seasoned sales reps, Accournt Managers with proven track record of success in above noted industries selling industrial grade hand tool solutions to National Accounts, multi-site, or single standing large accounts. Reps must possess credentials and security clearances to readily obtain access to high security customer environments. Additional incentives for initial orders and retention beyond standard Manufacturer Rep Commission structure. Products NOT available through distribution anywhere in US/Canada.
 
Company ID: 115720 - Click Here for Full Details
Product Lines:
We Manufacture the World's Only Noise Cancelling, Voice Isolation Microphone for Speech Recognition and Private Voice Communications.

It Allows Anyone to Work and Communicate Without having to Worry about Disturbing Others or Being Overheard while Simultaneously Cancelling All Background Noise. 
 
Target Markets:
The Customer Base for our Product is Virtually Infinite. It Encompasses Anyone who Uses Voice Technology that has a Need for Privacy and/or Noise Cancellation. i.e. Physicians, Healthcare, Open Office Workers, Students, Educators, Military, Law Enforcement, Lawyers, Commuters. 
 
Sales Opportunity:
The customer base for this product is virtually infinite. Some of the vertical markets include: Healthcare, law enforcement, military, security, legal, interpreters, assistive technology, education, commuters, open office workers, processing plants, manufacturing, construction, recording studios, film sets, engine rooms, concerts, airports, nightclubs.

Growth - With over 70% of offices now open plan coupled with 40% of smartphone owners using some sort of voice recognition software. Speech is quickly taking over as the user interface to all manner of gadgets and devices.

Competitive Advantages:
• There is no competition, this is the only device of its kind
• First to market
• Patent Protection with both design and utility patents
• Sole source, highly scalable
• It can be used with phones, computers, transmitters, recording devices, etc.
• Worldwide markets
• This disruptive innovation provides a unique opportunity to enter, control and leverage entirely new markets

We are looking to retain the services of commission only sales representatives for the purpose of selling of our products. With approved sales reps earning a 20% Gross Sales commission paired with incentives that can increase the commission rate to 35%. Ideal reps should have (but are not limited to) reasonable working knowledge of technology such as computers and smartphones. Bonus for reps experienced in speech recognition technology, microphones, transcription.
 
Company ID: 115957 - Click Here for Full Details
Product Lines:
Looking for Sales Reps that can Obtain Work for our Custom CNC Machine Shop .

We are Able to Custom Machine Parts to the Customers' Requirements. 
 
Target Markets:
Our markets include Automotive, Military, Aerospace, Construction, Pharma, and Oil and Gas. 
 
Sales Opportunity:
Excellent opportunity for manufacturer's rep to team up with a company that has been in business for 20 years with current ISO 9001 -2015 Certification. We are a small company that can quickly meet the need's of the customer's requirements. Over 10 newer quality CNC machines. Commission structure to be worked out.
 
Company ID: 115898 - Click Here for Full Details
Product Lines:
Harness and Cable Assemblies
Electromechanical Assembly
Over Molding and Others 
 
Target Markets:
Medical
Equipment Manufacturers
Military
Specialty Automotive and Others 
 
Sales Opportunity:
Our expanding company has a proven track record with positive and mutually beneficial sales rep relationships (references are available) in the sales of our harness and cable manufacturing and electronic assembly including PCB assemblies. Our sister companies provide options and opportunity for true integration of processes that support vertical manufacturing opportunities.
 
Company ID: 115882 - Click Here for Full Details
Product Lines:
Contract Manufacturer of Printed Circuit Board Assemblies, Cable Harness Assemblies. 
 
Target Markets:
Have Sales in the following Markets: Automotive, Industrial, Medical, and Consumer Products. 
 
Sales Opportunity:
Our company is a Contract Manufacturer for Printed Circuit Board, Cables and Wire Harness Assemblies. Established in 1970, we pride itself on the guarantee to unsurpassed quality, service, and extreme competitive pricing.
 
Company ID: 115877 - Click Here for Full Details
Product Lines:
Our Company is a Service Provider for the Destruction of Data on Electronic Media, and Green Recycling of the By-Products.

A National Service Offering for Organizations to Ship their End-of-Life Data Containing Media, such as HDDs, to our Facilities in Fort Myers. 
 
Target Markets:
Hospitals, Medical Clinics, Law Firms, Fortune 2000 Companies, Engineering Firms, All Local, State, and Federal Government Agencies. 
 
Sales Opportunity:
Straight 10% commission. Very high income potential. This opportunity is ideal for sale reps with a strong technical or security background. The more you understand the significance of protecting end-of-life processing of electronic media containing Government sensitive or corporate sensitive data, the higher your income potential will be.
 
Company ID: 115274 - Click Here for Full Details
Product Lines:
Forging, Aluminium Die Casting, Casting, Stamping, Precision Machining, Customized Engineering, Contract Manufacturer, Sub-Assembling; Hydraulic Cylinder Heads, Hydraulic Fittings, Adapters, Valve Block, Pump/Valve Accessories, SAE Flanges. 
 
Target Markets:
Manufacturing, OEM, Automotive & Commercial Vehicles, Hydraulic Fluid System, Agriculture Equipment, Construction Equipment, Medical Equipment, Engines, Recreational Boats/Vehicles, Appliance Parts/Components. 
 
Sales Opportunity:
We are an oversea manufacturer that has our own forging, tooling design and manufacturing capacity. Our precision machining facility are equipped with over 200 CNC machines and several machining centers. We have a warehouse in GA to offer JIT delivery and other services to our customers. We hold IATF 16949:2016 & ISO 14001:2015 & ISO 9001:2015 and we are familiar with PPAP and other quality processes in the industry. We offer competitive commission rate in the industry and look for long term relationships!
 
Company ID: 115804 - Click Here for Full Details
Product Lines:
PCB Assembly, BGA, Micro BGA, SMT, and Through Hole. 
 
Target Markets:
Industrial, Commercial, LED, Medical, Gaming, Aerospace, Military. 
 
Sales Opportunity:
We are an electronic contract manufacturer who has been in business since 1998. We are growing and looking for new opportunities. We operate out of a 25,000 sq ft building with 2 SMT lines and we have plenty of available capacity. We currently build boards for Honeywell, System Sensor, Cummins Allison, Kinze, ITW, Lecip, Methode Electronics, and many others.
 
Company ID: 115790 - Click Here for Full Details
Product Lines:
We are a Global Manufacturer of Worm Gear Jacks, Linear Actuators, Universal Joints, Gear Boxes and Other Linear Motion and Power Transmission Products. 
 
Target Markets:
Spiral Weld Pipe Mills, Saw Pipe Mills, ERW Pipe Mills, All Tube Mills, Process Plants, Cement Plants, Steel Plants - Hot and Cold Rolling Printing Paper Packaging, Petro Chemical, Antenna Position, Aluminum, Food and Beverages, Conveyor Systems, Ships Berthing Automobile Assembly, Textile Machinery. 
 
Sales Opportunity:
Wide range of products. Supplying to Duff norton for more than 15 years. Wide range of Industries to approach. Other terms will discuss In-person. We also offer end to end solution in to client's requirements. We have offices in India and North America.manufacturing Screw Jacks, Universal Joints, Solar Actuators, Bevel Gear Boxes.
 
Company ID: 64161 - Click Here for Full Details
Product Lines:
Leader in Re-Manufactured AC and DC Electric Motors for All Material Handling Equipment and all Other Components for Mobile Equipment.

New AC and DC Electric Motors and all Components for Mobile Equipment including Lift Trucks, Agriculture, Construction, Airport, Minng and Steel Mill Equipment. 
 
Target Markets:
End Users and Dealers of: Lift Trucks, Mining Equipment, Construction Equipment, Agricultural Equipment, Ground Support Equipment, Utility Vehicles. 
 
Sales Opportunity:
Highest Commissions - above Industry Standards. 50 year Committment to the Mobile Equipment Industries. Only Material Handling AC and DC Electric Motor Re-Manufacturer with UL Recognition. Exclusive Schabmueller and Sauer Danfoss North American Representative.

Certified Re-Manufactured/Re-Engineer Center for:
Schabmueller
General Electric
Mitsubishi/Caterpillar
Clark
Linde
Unicarriers

In-House Machine Shop
In-House Rewinding

Quality Audits by:
Schabmueller
Mitsubishi/Caterpillar
Clark
 
Company ID: 115766 - Click Here for Full Details
Product Lines:
Highly-Engineered Industrial Finishing Equipment. 
 
Target Markets:
Automotive Parts Manufacturers, Food Preparation Businesses, OEM Manufacturing Businesses, Schools, Institutions, Hospitals, and Government Agencies. 
 
Sales Opportunity:
Opportunity to sell $5- $10 Million Sales Revenue Revenues Annually. Qualified Leads are furnished for Global Business Opportunities. Our Business is a very well known, Global. "Award-Winning" designer, manufacturer, and distributor of Capital Equipment with Plants in the US and China.
 
Company ID: 115761 - Click Here for Full Details
Product Lines:
We are a Canadian Solid Carbide Tooling Manufacturer with a Major Focus on Producing Application Specific Tools for Aerospace Parts, Power Generation Industries, and Hydraulic Manifolds.

Our Production Team can Produce Tools with Very Tight Tolerances including Radii and Angles. 
 
Target Markets:
Manufacturers of Aircraft Components, Power Generation Assemblies, High Volume Automobile Components, Valves, Manifolds, High Production Machining Facilities. Drilling Tools, Milling Tools, Thread Milling Tools, Port Tools, Round Form Tools, etc. Modified Standards also Manufactured. 
 
Sales Opportunity:
The person we seek is currently calling on the listed industries and has developed contacts in engineering or mid-management as the decision makers for purchasing tooling. Since the currency in Canada is 25% less than USA we should be competitive with US suppliers.

We would propose a sliding scale form of payment starting at 10% and dependent on sales volume rising from that point forward, this to be further discussed. The territory covered by the rep would be made exclusive to that individual. We are a 15 person shop with 8 CNC 5/6 axis machines all with robot loaders allowing us volume production of over 300 tools per day.
 
Company ID: 114201 - Click Here for Full Details
Product Lines:
We Produce: Unique Vacuum Stations, Unique Machines for Testing the Radial Clearance in Bearings, Unique Tribometer, Unique Pneumatic Clamps, and more.
We also Offer Custom Engineering Services. 
 
Target Markets:
OEM, Automotive, Aerospace/Aircraft, Industrial Distributors, Bearing Manufacturer, Research Laboratories, Universities, Medical and more. 
 
Sales Opportunity:
We are a diverse, fast growing, and high tech manufacturing company that produces our products from start to finish. Our products are unique and have no analogues in the world. These are expertly engineered products that have been manufactured to the highest standards. We can perform any custom order, from engineering design to production. We are looking for representatives that can cover North America territory and are willing to prioritize our products. Commission scale to be discussed personally.
 
Company ID: 115715 - Click Here for Full Details
Product Lines:
Prototype Tooling, Fixtures, Dies, and Assemblies. 
 
Target Markets:
Automotive, Aerospace, Medical, Tooling, Manufacturing, etc. 
 
Sales Opportunity:
We are a growing CNC Prototype job shop looking to expand into other markets and opportunities in order to do that we need an experienced sales rep. We'll design, create, or fix anything. Our only limitation is your imagination. Looking to fill a full time position with commission incentive, but are not against a head hunting situation.

Benefits Include:
- Full-time salary
- % based commission
- Fully paid for full insurance
- Matching 401K
- Paid sick, holiday, and vacation time
 
Company ID: 115694 - Click Here for Full Details
Product Lines:
Contract Manufacturing Services:
Precision Machining
Sheet Metal Fabrication
PCB Assembly
Electro-Mechanical Assembly 
 
Target Markets:
Any Company that is Producing a Product and may Need our Manufacturing Services. Executives, Engineers, and Procurement Personnel are the Typical Positions that would be Potential Decision Makers for Engaging with a Contract Manufacturer. 
 
Sales Opportunity:
Our company is one of the most vertically integrated contract manufacturers on the east coast. We have broad capabilities in the multiple manufacturing services we offer which are all under one roof in a 180,000 square foot facility that contains state of the art equipment in all facets of our business. You would not just be selling one service but four with some customers taking advantage of them all which reduces their vendor base and the cost of doing business.

We stand out from our competitors not only because of the array of services we specialize in but also because of our vast experience having been in operation since 1970. We are dedicated to quality and are ISO 9001:2015 and ISO 13845:2016 (medical products) Certified. Our reps are assigned a dedicated program manager to ensure we provide exceptional communication and support.
 
Company ID: 115670 - Click Here for Full Details
Product Lines:
Machined Parts, Fabricated Parts, Assembled Parts, Weld Fixtures, Robot End Effectors, Online Tooling, Offline Tooling, Turntables, Trunnions. 
 
Target Markets:
Automation Integrators
Machine Builders
Engineering Companies
Forging Companies
Metals Casting Companies 
 
Sales Opportunity:
Looking for motivitaded self-starters who can sell machined products, weldments, and assemblies to industrial and automotive consumers. We are a full service manufacturer offering CNC milling, turning, boring, paint, and assembly with inspection and certification.
 
Company ID: 115616 - Click Here for Full Details
Product Lines:
Our Company Produces Custom Nameplates, Labels, Decals, Name Tags, Identification Tags, Metal Tags, Advertising Signage, Metallic and Non-Metallic Nameplates, Digital Nameplates, and Barcode Labels. 
 
Target Markets:
OEMs, Service Centers, Service Business with Product Identification. Our Products are Used for many Applications in a Wide Range of Industries. We have Products that meet a Variety of Needs and Accommodate all Types of Normal and Harsh Eenvironments. 
 
Sales Opportunity:
Our company is a premier manufacturer of quality identification products including custom decals, nameplates, and pressure sensitive labels. We have been providing products and services to industrial, commercial, and institutional clients for over 80 years. Founded in 1935, and located in Chicopee, Massachusetts, our company serves client locally in Western Massachusetts, regionally throughout New England, nationally across the United States, and worldwide.

We enjoy an excellent reputation in the product identification industry and can attribute our success and longevity to a significant focus on customer satisfaction. Our owners, management and employees are dedicated to exceeding customer expectations for quality, service, and product performance. We focus on your company’s overall needs and provide you with exceptional identification products and graphics. We maintain CSA, UL, and ISO 9001:2015 Certifications.
 
Company ID: 115364 - Click Here for Full Details
Product Lines:
"Build to Print" CNC Machined Components for Medical Equipment, Semiconductor Equipment Components, Jigs/Fixtures, Tooling Spares, or Ware Parts (Metal Stamping, Plastic Injection Molds, Components for Automation Equipment, and any Wareable Replacement Parts). 
 
Target Markets:
Manufacturers of Equipment, Automation, Automotive Production, Medical Equipment, Bearing Manufacturers, Aerospace Tier 1 and 2 Component Manufacturers, and any Customer Requiring "Build to Print" CNC Manufacturing with the Goal of Cost Savings but World Class Q!uality. 
 
Sales Opportunity:
This is a long term opportunity with reasonable commission to work for a known and proven manufacturer based on best cost region (Thailand). We are already exporting to USA, about 65% of our production.
 
Company ID: 115296 - Click Here for Full Details
Product Lines:
We are a Contract Sheet Metal Manufacturer with 40 Years in the Industry.

We also do Small to Medium Fabrication (up to Roughly 3,000# Assemblies). 
 
Target Markets:
Healthcare, Aerospace, Automotive, Household, Prototype Development, Research, and Development. 
 
Sales Opportunity:
We have lasers, forming machines, punching machines, limited machining, MIG, TIG, stick, robot welding capabilities, dedicated Quality Control personnel to ensure quality production. With our vast expertise and multiple engineers on staff, we have the machinery, the personnel and ability to create incredible sheet metal and fabricated products for the right price, on time, every time!
 
Company ID: 115225 - Click Here for Full Details
Product Lines:
High Speed Progressive Dies and Sub Components, Design and Build. 
 
Target Markets:
Automotive, Industrial, Mil Aero, Medical. 
 
Sales Opportunity:
High-end manufacturer with excellent reputation, good competency, and excellent quality. We have been in business since 1972. We have a tooling division that specializes the high speed dies running in the 20 to 90 tone range. We have experience in dies for electrical connectors, lead frames for electronic modules, and specialty components. We support prototype builds with bridge tools and have experience with many alloys.
 
Company ID: 113379 - Click Here for Full Details
Product Lines:
Wide Ranges of Industrial Waterproof Connectors for Transmission of Power, Signal, USB, RJ45, and Fiber Optic.

For indoor and outdoor applications. 
 
Target Markets:
All Types Manufacturers that Need Waterproof Industrial Connectors in their Products, Connection Systems, and Products. 
 
Sales Opportunity:
We have US headquarters with a top level manufacturer focus on industrial connector product design, manufacturing, and distributing.

We are providing to sales representatives an exceptional opportunity of:
1. Super fast growing market
2. Top level products
3. Super high commission
4. Customer and marketing protection

Our sales representatives only need to build the connection with potential customers, our team will do all following jobs including support, and warranty.
 
Company ID: 115205 - Click Here for Full Details
Product Lines:
CNC Turning: up to 2 5/8" Diameter Bar & 8" Diameter Chucking
CNC Horizontal & Vertical Milling
CNC Swiss Screw Machine Products: up to 1" Diameter x 30" length.
Materials Machined: Stainless Steels, Aluminum, Brass, Steel, Beryllium Copper, Copper, Plastics, Monel, Copper-Nickel, Kovar. 
 
Target Markets:
OEM Manufacturers, Assemblies, and Machined Components: Industries Served include: Medical, Aerospace, Electrical Connector, Electronics, Precision Shaft, Valves & Fittings, Hermetically Sealed Connectors, Glass to Ceramic, and Plasma Torch Industries. Prototypes to Moderate Volume. 
 
Sales Opportunity:
CNC Turning/Milling & CNC Swiss Machining: ISO 9001:2015. OEM Manufacturers, assemblies & machined components. Current supplier to Aerospace, Medical, Firearms, Valves, Consumer Products, Connectors, Glass to Metal Seal & Aircraft Industries. Machining requirements include CNC Turned, CNC Milled and CNC Swiss Screw Machine products. Work closely with customer engineers.
 
Company ID: 115137 - Click Here for Full Details
Product Lines:
We Offer a Wide Range of Laser Measuring Alignment Systems, Accessories, and Customized Solutions that will Solve Manufacturing Problems, Improve Manufacturing Efficiency, Reduce Downtime, and Increase Profitability. 
 
Target Markets:
Our Laser Measuring Equipment is Actively Used Across Industries such as: Aerospace, Military, Power Generation, Machine Shops, Paper and Textile Mills, Shipbuilding, Plastic and Film Production, as well as Electronic Assembly, to name a few. 
 
Sales Opportunity:
Our alignment products are specifically engineered to increase profits and reduce costly downtime for industrial manufacturers. The intelligent design efficiently eliminates misalignment issues, resulting in increased production quality and reduced scrap. Our products are easy to use, easy to learn and highly versatile. Portable and compact, this equipment can easily go wherever you need to use it.

We offer an extensive range of alignment accessories, providing ready made options for working with your particular needs. Proudly engineered and manufactured in the USA. All products made of solid, machined metal. Hand assembled and inspected for quality. Built to last years of industrial use. Legendary Support and Responsiveness.

On call Technical Support featuring engineers with over 100 years of combined experience, here to give you reliable advice and innovative solutions for your needs.For your convenience, many products are in-stock and can often ship in a day.Customization is a Pinpoint Specialty – unrivaled in the industry. Rely on a quick turnaround when you need repairs.
 
Company ID: 114963 - Click Here for Full Details
Product Lines:
Customized Automated Test Equipment ATE 
 
Target Markets:
Military, Aerospace, Medical/Bio-Med, Telecomm, Automotive, OEM/Commercial, and many others. 
 
Sales Opportunity:
Our company is a specialized Engineering Design/Build firm, Advanced Software Developer, and integrated functional Automated Test Equipment (ATE), Manufacturer. Our unique blend of talented engineers are able to provide more than a typical solution for when the production engineer needs a more adaptable solution than what a typical instrument can provide. Our goal from the start was to provide automated test systems and flexible ATE systems for power supplies, making us the first commercial manufacturer of Automated Power Supply Test Equipment globally.

We have expanded our product line to include a full series of products from desktop units to full-featured and integrated rack mounted solutions. As a company, we have invested in people, design and support that help us achieve customer satisfaction and nurture long-term client relationships. Commission structure 10%. Engineer support, we will go with you on sales calls if needed.
 
Company ID: 114936 - Click Here for Full Details
Product Lines:
- Low Power DCDC Converters (0.5W - 40W)
- AC/DC Power Solutions - We are Developing a New Range.
- LED Lighting Solutions - Drivers for Philips and Omron, High Bay Lighting Solutions
- Batteries - Alkaline (AA, AAA, 9V etc.), Button Cell, Lithium, Rechargeables, etc. 
 
Target Markets:
Industrial, Medical, Security, Consumer, Lighting. 
 
Sales Opportunity:
We are a young dynamic company who design and manufacturer power supplies. We are open to ideas that benefit both sides. We are hungry to grow and to grow quick. Our industry is in a state of growth and we need focused, driven sales people who can help us achieve this.

There are big rewards on the back of our growth. We have struggled in the past locating good knowledgeable sales staff to grow our business and we are looking forward to welcoming a new team. The products we manufacturer are all compatible with existing products in the market and we can help with cost reductions or simply new designs. We look forward to working you.
 
Company ID: 114896 - Click Here for Full Details
Product Lines:
New and Remanufactured Turnkey Broaching Systems
Used Broaching Machines
Broach Tools and Broach Tool Sharpening Services
Broaching Machine Replacement Parts and In-Field Service and Repair
Production Broaching Services 
 
Target Markets:
Automotive Supply Chains (1st Tier and Below)
Agricultural Equipment Manufacturers (John Deere, etc. and the Supply Base)
Parts Suppliers to the Heavy Truck Manufacturers Industry
Small Arms Manufacturers
Hand Tool Manufacturers 
 
Sales Opportunity:
Our company offers broaching solutions tailored to meet every budget. Customers can choose a new machine utilizing the latest electric drive technology or remanufactured machines from our inventory of over 350 used broaching machines. If the production requirements don't justify the cost of buying a broaching machine, We can broach parts for them on a contract basis.

We offer spare parts to support nearly every broaching machine built in the USA since the 1940's and has the expertise to offer in-field service and repair of these older machines as well. Our company also designs and build broach cutting tools of all types and offers sharpening and reconditioning service on all types of broach tools. We are an American owned company since 1946.
 
Company ID: 99524 - Click Here for Full Details
Product Lines:
Custom Engineered Shock and Vibration Solutions as well as Rate Controls, Force Controls, and Custom Dampers.

We have a Standard Line of Shock Absorbers in Stainless Steel, Carbon Steel/Black Oxide, and Composite. We can Handle Sizes from 1/8 dia to 20 inches Diameter Products. 
 
Target Markets:
Commercial Aviation
Defense
Industrial Machinery Designers and Builders
Oil and Gas Industries
Medical
Food Processing 
 
Sales Opportunity:
We have over 150 years experience developing products for the target markets listed. We have many patents and can supply low volume and high volume applications. We have hydraulic products, elastomeric solutions, and wire rope isolators. We have low and higher cost solutions and have substitute product for all the major competitors like ITT Enidine, Ace Controls, Enertec, etc. Please take a look at us and we can solve any shock, vibration, or actuation problem.
 
Company ID: 98659 - Click Here for Full Details
Product Lines:
Our Company Offers Vertically Integrated Manufacturing Services/Solutions.

Core Competency includes, Cable Assemblies/Wire Harnesses, Bulk Wire & Cable, Connectors, Printed Circuit Board Assemblies, Full Turnkey HLA/Box Build Services. 
 
Target Markets:
OEMs for Medical Devices, Automotive, Industrial (Automation), Transportation, Communications, & Consumer. 
 
Sales Opportunity:
44 years in business, Financially solid, 7 global locations, including 5 manufacturing facilities, all in low cost regions. Customer service & stocking warehouse in the USA. Hybrid path to market (Regional Direct plus MREPs), Competitive Commission structure, Incentive plans available.
 
Company ID: 114687 - Click Here for Full Details
Product Lines:
Modular Fire Barriers, Separation barriers, Transformer Fire Barriers, Substations, Vault Protection, Ballistic Walls, Ballistic Fire Barriers, Jet Fire Barriers, Explosion Barriers, Solutions and Consulting, Fireproofing, Fire Protection, Cable Wrapping, Intumescent Products, Basalt Products. 
 
Target Markets:
Utilities, Energy Storage, Power Generation, Critical Infrastructure, Security, Safety, and Fire, Asset and Insurance, Transformer manufacturers, Nuclear Facilities, Dams and Waterways, Ports and Cargo, Airports, Rail, Marine. 
 
Sales Opportunity:
Join the industry leader in innovation and design of fire barriers and enhanced fire barriers for infrastructure protection. We deliver fire barrier solutions nationally and provide turn key assessment, design, fabrication and installation. We customized our listed and rated materials to fabricate barriers, boxes, wall modules, vaults, separations and all types of rated assemblies.

Fire, ballistic, blast, IED, heat, wind load, radiation, blast, noise and jet fire enhancements in a modular, cost effective design! Sell value - not price to large and small clients, utilities, contractors and with Sinisi, Always be Closing for Big commissions!
 
Company ID: 114773 - Click Here for Full Details
Product Lines:
Casters and wheels for the Industrial, foodservice, AGV and medical Industries. 
 
Target Markets:
B2B. OEMs and design engineers, Material Handling, foodservice and medical companies to name a few. 
 
Sales Opportunity:
Great opportunity. Modest Base and no cap on commissions. We currently supply many fortune 1000 companies across the US. We have solid financials and US office in High Point, NC.
 
Company ID: 114730 - Click Here for Full Details
Product Lines:
Architectural Finished and Unfinished Wood Veneer Wall Panels
Architectural - Commercial Millwork Components
Flexible Veneer Sheets - Finished and Unfinished
Finished Decorative - Exotic Veneered Laminate Sheet
Wrapped Moldings, Trim, and Veneer Edge Banding
Solid Trim Profiles 
 
Target Markets:
Store Fixture Manufacturers
Commercial Architectural Millwork Fabricators
Contract Furniture Manufacturers
Aircraft Interior Fabricators
Boat/Marine Industry
High End Residential Millwork
Ceiling and Flooring Manufacturers 
 
Sales Opportunity:
Located in Delray Beach, our company has been in business for over 30 years. The majority of our work is installed in Boat/Marine Industry for Yachts worth over $10M dollars. The level of quality of the work we perform for this industry is above acceptance for standard AWI guidelines. We are looking to partner with a firm that calls on above target markets and can work with designers and architects on all projects.

We can manufacture with highest quality any veneer species on any substrate, with any matching specifications and supply with any finish through our four (4) high press lines and two (2) flat line UV curing finishing process. Negotiable commission structure can be established and we will provide all sales tools and training. Opportunity is State of Texas and surrounding region.
 
Company ID: 114074 - Click Here for Full Details
Product Lines:
We Typically Assess Products.

RoHS, REACH, WEEE, Conflict Minerals, or Prop. 65 are Examples of Environmental Product Compliance Requirements. Offered Services include anything from Customized Training to Full Support of Environmental Compliance Requirements. 
 
Target Markets:
Our company Serves Customers all over the USA and Canada, mainly Manufacturers of Electronic Devices (Consumer and Professional). We also work with EMC and Safety Labs. 
 
Sales Opportunity:
This is a unique opportunity to make easy sales because:
- There are few actors in this niche market. There you won't have much competition
- Our pricing are lower to the competitors
- Our reputation is strong particularly among well established worldwide labs
- The demand of product environmental compliance is constantly growing
- We will provide as much support as necessary
- We are open to discuss Commission
 
Company ID: 114683 - Click Here for Full Details
Product Lines:
CAN/LIN Network Controllers, Gateways, etc.

World's Only ISO280-Pluggable CAN Controllers and Solid State Relays
Display Products for Vehicle Accessories or Control
Telematics- Satellite, 3G/4G, Bluetooth
Cloud-Based Fleet Management - Full Service Connectivity 
 
Target Markets:
Specialty Vehicle Manufacturers of All Kinds. Current Customers include: Electric Vehicles, Off-Road, Marine, OTR Trucking, Vocational Trucks, Agriculture, etc. 
 
Sales Opportunity:
We offer full training, technical support and an established product line from our offices in Dayton, OH. Our manufacturing facility is IATF16949 and ISO9000-2015 Certified. Located in Germany, we are a Tier-1 automotive supplier, from which we derive an entire catalog of CAN-based products used internationally and across too many industry segments to list. We are looking for Specialty Vehicle market specialists. If you are actively involved in this industry and can substantiate growth potential we can offer long-term commission protection and amazing customer support.
 
Company ID: 111923 - Click Here for Full Details
Product Lines:
Metal Fabrication
CNC Machining
Casting (4 types)
Plastic Injection Molding 
 
Target Markets:
Companies/Manufacturers that Outsource Above Projects Dealing in Large Quantities such as Container Loads. We have a Broad Base of Customers and Products Produced. 
 
Sales Opportunity:
Working with us means:
Local support
US Based Company in Newark, CA
Direct contact with manufacturing facility
High quality products/Competitive pricing
Open door policy to the end-users/team players
ISO 9001-2015 plant certification
5% commission
 
Company ID: 112450 - Click Here for Full Details
Product Lines:
Electronic Contract Manufacturer Providing a Full Range of Expert Printed Circuit Board Manufacturing & Assembly Services, Cable Assembly, Box Assembly for Electronic Products.

Our Company is an AS9100 & ITAR Certified Company. We can do Proto to Full Production to Full Turnkey Solution. 
 
Target Markets:
Aerospace & Defense Industries, OEMs, Medical Device Manufacturing, Automobile Industries, Optoelectronics Motion Control, Lighting Industries, Robotics, Automation, Lab Equipment. Wherever Electronics PCBs are Used, we can Sell our Services. 
 
Sales Opportunity:
Electronics is a huge industry, Aerospace, Defense, and medical Equipment. Manufacturers outsource millions of dollars to contract and ongoing repeat orders. We pay 3-5% commission based on contract size. We help to attend trade shows and if required advance technology equipment. We will update our manufacturing with technology and market requirements. We have automatic SMT line that's capable to manufacture and do any High Technology Electronics Products.
 
Company ID: 98698 - Click Here for Full Details
Product Lines:
Ceramic Fiber Products: Boards, Gaskets, Modules, Custom Vacuum Formed Shapes, Textiles. High Temperature Putty, Adhesives, Moldable Ceramic, Refractory Precast Shapes. 
 
Target Markets:
Steel Fabricators, Industrial Furnace Builders, Primary Steel Making, Casting and Forging Foundries. Petrochemical Plants, Heat Treaters, Investment Casting, Incineration, Boiler Manufacturers. 
 
Sales Opportunity:
With the weakness of the Canadian Dollar, our pricing, in US Funds, is very competitive. We manufacture custom refractory products that are in most cases repeat business. OEM's give us specs and drawings and we help engineer a solution for their high temperature applications.

We currently offer the industries fastest turnaround with ceramic fiber vacuum formed shapes. We have inside sales support with engineering and cad support. Average transaction is $2,500 and as high as $80,000. 99% of our customers are repeat business (within 12 months) with many consumable product sales, some customers ship weekly.
 
Company ID: 114529 - Click Here for Full Details
Product Lines:
Currently Fabrication Catwalks, Platforms, Ladders, Miscellaneous Repair, and Fabrication of Sand Plant Items.

Looking to Expand into Other Markets and Possibly Set-up Shop for Producing for Overseas Companies. Interested in Any Type of Fabrication Needs. 
 
Target Markets:
Aircraft Companies for things like Scaffolding, Carts, & Shipping Containers. Oilfied for any Steel, or Stainless Steel Weldments. Conveyors, Airport Moving Systems, Jet Way Bridges. Any Customers having Fabrication Needs. Production or Single Items. 
 
Sales Opportunity:
We are a new company in central Texas looking to expand our roll in fabricating. We are a women owned company and have a HUB designated number. We have a shop that is 16,000 sq. ft. with two 10 ton overhead cranes with 22' hook height. We are supported with burn tables, rolls, brakes, mills, lathes, all different types of welding machines for aluminum and different steels.
 
Company ID: 114440 - Click Here for Full Details
Product Lines:
Our Product is a Windowsฎ-Based Program Designed to Increase Efficiency in Creating Safety Permits; i.e. Lockout Tagout (LOTO), Job Safety Analysis (JSA), Permit to Work (PTW), Confined Space, Hot Work, and much, much more to Help Clients Meet their Safety Requirements. 
 
Target Markets:
Power Generation Sector: Power Plants, T&D, Nuclear Plants, Oil & Gas, Pharmaceutical, Manufacturing, Construction. 
 
Sales Opportunity:
Commission based contract with opportunity of annual residual on top of commission structure. Only lead generation or introduction needed, then opportunity is handed to tech sales team to close.
 
Company ID: 76734 - Click Here for Full Details
Product Lines:
Family of Ceramic-Matrix-Composite (CMCs) Materials & Components for Petrochemical, Industrial, and Aerospace Applications.

A Hybrid Between Monolithic Ceramics & Conventional Composites, CMCs Offer Desirable Properties of Monolithic Ceramics such as SiC Plus High Thermal/Mechanical-Shock Resistance. 
 
Target Markets:
Reliability Engineers in Petrochemical Processing. Process/Design Engineers whose Operating Environment is High Temperature (up to 2,500ฐF), Corrosive, Abrasive, Chemically Agressive, and/or where Component Weight is Critical. Alternatives to Silicon Carbide, Vespel, Inconel, Hastelloy, Haynes 230. 
 
Sales Opportunity:
We seeks qualified reps with a background and pre-existing relationships in the petrochemical-processing, semiconductor-processing, industrial and/or aerospace industries. This is a commission only position.

Our ceramic-matrix composite (CMC) materials and components are a mature technology with an aerospace pedigree. Historical CMC aerospace applications include turbine engines, hypersonic vehicles and rocket/missile attitude-control systems. While some materials within our CMC product family are suitable for use in the aforementioned applications, our CMC-industry-unique primary focus is value-based CMCs suitable for use in petrochemical and industrial applications. Our current applications include; bearing in large, high-value petrochemical processing pumps, metal-forging & aerospace secondary structure. Other potential applications include waste-heat recovery systems & armor applications.

Reps can be confident you will receive the support you require to be successful. We will ensure you have an understanding of the technology, the materials within our product line, and, most important, their relative strengths and weaknesses as compared to baseline materials such as Silicon Carbide, Vespel, Inconel, Hastelloy, Haynes 230, or other high-temperature Nickle-based alloys.

We are a small company but do not qualify as an SBA small business due to our relationship with an affiliated company. We seek to grow our customer base.
 
Company ID: 91619 - Click Here for Full Details
Product Lines:
We are an Innovative Manufacturer of Handling and Storage Equipment with a Focus on Providing Solutions for the Door, Window, and Glass Industry and other Heavy Products.

Trolleys, Dollies, and Storage Solution with Careful Consideration for what Professionals Needs to be at the Top of their Game. 
 
Target Markets:
Warehouses, Transportation Companies, Windows and Doors Companies, Glass Shops, Construction Sites, Moving Companies and Stores, Companies Specialized in Home Appliances, Mattresses, Furniture, Treadmills, Electronics, Sports Specialists, and Rental Companies. 
 
Sales Opportunity:
This is a unique opportunity for reps to sell some unique new material handling equipment designed to move heavy products very easily. There is actually no competition in North America that manufactures that type of equipment to move parts as heavy as 800 lbs with only one person and Zero Effort. The reps will have full marketing support and a very attractive commission rate.
 
Company ID: 60439 - Click Here for Full Details
Product Lines:
Pump Components
Agricultural Bearings for Implements
Bearings
Machined Part & Components
Precision Cut Tubing
Stamping 
 
Target Markets:
Pump Manufacturers, Fan and Motor Manufacturers, Agriculture Equipment Manufacturers, Automotive Suspension Manufacturers. 
 
Sales Opportunity:
We are an IATF 16949 registered manufacturer. We are looking for reps in areas and industries that we don't necessarily do business with. We have been involved in the automotive and bearing industries since we began in 2002 and are now looking to expand into other industries that our products will complement. These industries would include pump manufacturers and distributors, farm implementation manufacturers, fan and motor manufacturers and distributors as well as others.

We are a privately owned company with a deep history and great reputation in the industries we currently provide to. We employ outside sales reps based on an adjusted commision of invoiced sales for production parts. Qualified commisions are paid monthly.
 
Company ID: 114263 - Click Here for Full Details
Product Lines:
Machine Vision and Automation Solutions.

We Design and Produce Custom Solutions to Meet Today's Competitive Market. 
 
Target Markets:
Pharmaceutical, Packaging, Manufacturing, Automotive, Industrial, Military. 
 
Sales Opportunity:
Ours is a 25 year old company with the technical knowledge to meet the customers critical needs. We have a great reputation for supplying a quality product. We support our staff to assure the customer is happy. One of our advantages is low overhead to maintain costs.
 
Company ID: 114253 - Click Here for Full Details
Product Lines:
Manufacturing Consultant. 
 
Target Markets:
Automotive Tier 1 & 2 Suppliers. 
 
Sales Opportunity:
Our Services Provide:
- OEM Supplier wall to wall assessments and gap closure analysis plan.
- Work with high level management team at troubled suppliers to identify and resolve performance issues.
- Resource Leveling - Perform manning assessments and identify detailed roles & responsibilities, and any training requirements or personnel changes.
- We have global access to technical support in all areas of manufacturing Ex. Engineers, metal stamping experts, injection mold technicians, quality engineers, production supervision, logistics, and smelting.
- For the past five years I’ve been fixing companies that are broke (literally), and turning them into profit centers. That’s my passion!
 
Company ID: 114223 - Click Here for Full Details
Product Lines:
Contract Manufacturer
Board Type: Single/Double Sided, Multilayer.

Materials:
• FR-4/FR-5
• High Tg Laminate
• PTFE (Teflon/High-Frequency)
• Ohmega & Similar

Surface Finishes: Bare Copper, HASL, Immersion Tin, White Tin, SMOBC (Solder Mask on Bare Copper) 
 
Target Markets:
• Automotive
• Communication
• Industrial
• Medical
• Military/Aerospace 
 
Sales Opportunity:
Our company is a world class supplier of RF, Microwave and Antenna PCBs for the Aerospace, Defense, Telecommunications and Medical Device industries. Over the years we have made substantial investments in the latest Technologies, Equipment, Facilities and Personnel to support a diverse variety of product types. We have four state-of-the-art facilities on three continents to serve you. From rapid prototype development to large scale production ramp-ups we supply many notable OEMs and EMS service companies around the world.

Our purchasing power coupled with over 26 years of processing experience allows us to provide you one of the largest stocks of RF/Microwave and Teflon™ materials in North America with the best price points and lead times in the industry. Working with many of the largest OEMs in the world we are constantly reviewing and adjusting our inventory to meet the latest trends in technology by stocking the most popular products from Rogers, Taconic, Nelco, Isola, and Arlon to meet your immediate needs.

Certifications:
• IPC-6012 class 3
• IPC-6013 class 3
• ISO 9001
• ITAR registered
• ROHS compliant
• UL

Specialties:
• Blind/buried vias
• Carbon contacts
• Controlled depth drilling
• Controlled depth milling
• Controlled Impedance
• Edge plating
• Filled/plugged vias
• High Frequency
• Large format PCB
• Landless vias
• Plated Through Holes
• RF
 
Company ID: 114143 - Click Here for Full Details
Product Lines:
Soft Absorbers or Dampers that Soften Closing Items (Lids, Seats, Handles, Drawers, etc.), Cyclonic Filters for Water Based Coolant (No Oil, no Particles Above 3mm). 
 
Target Markets:
Automotoive, Off Road Vehicles, and Home Appliance Industries. 
 
Sales Opportunity:
We offer exclusive territory rights to our sales reps. We offer small rotary dampers which our competitors cannot emulate, linear dampers that are very small, and large high torque rotary damper, and each damper has many different variants for shape and size making it easy for manufacturers to design special projects.

We offer a cyclonic filter which requires no maintenance, no running cost, and can be set up in a completely automatica system. It removes 98% of the 10 micron particle and 70% of the 5 micron particle. Oil based coolants do not work with our filter, only water based that are below 2.5Cp. No particles larger than 3-4 millimeters or it will clog. We offer free trials to interested companies.
 
Company ID: 113982 - Click Here for Full Details
Product Lines:
Industrial Cleaners, Concrete Patch, Asphalt Patch, Epoxy Floor Coatings, Snow and Ice Melt, Masonry Waterproofing, Enzyme Sand Sewer Treatment Products, Odor Control, Floor Finishes, Drain Line Opener, Citrus Liquid Products. 
 
Target Markets:
Building Maintenance Departments, Industrial Builders, Painting Contractors, Concrete Contractors, Specialty Coating Contractors, Waterproofing Contractors. 
 
Sales Opportunity:
Turn your contacts into cash with commissions paid on invoicing. Established company looking for reps with a following in any of the above listings. We want to establish long term mutually beneficial relasonships.
 
Company ID: 113965 - Click Here for Full Details
Product Lines:
Explosion Proof Lighting Products
Portable Power Distribution
High Lumen, High Efficiency Lighting
Explosion Proof 7 Vapor Proof LED Drop Lights, Flood Lights
Custom Solutions Manufacturing
Re-Rental Fleet Available
100% USA Made and US Veteran Owned and Operated 
 
Target Markets:
Lighting Distributors
Environmental
Oil & Gas
Utility/Power Plants
Nuclear Plants
Shipyards/Marine
Aviation
Government, FEMA, Homeland Security
Construction
Painting Booths
Automotive
Food & Beverage
Grain Storage 
 
Sales Opportunity:
USA Made in Haltom City Texas. Company is Veteran Owned and operated. We manufacture Explosion Proof and Vapor LED lights. Great opportunity to get these products into the hands of many customers in multi-industries. looking for representatives to canvass the country.
 
Company ID: 113927 - Click Here for Full Details
Product Lines:
Portable Trade Show Booth Kits.

Anti-Fatigue Interlocking Flooring:
- Wood Interlocking Flooring (9 Colors)
- Carpet Interlocking Flooring (13 Colors)

Outdoor Flags & Roll Up Banners:
- Rollup Banners (Single and Double-Sided)
- Outdoor Flags (Several Different Shapes - up to 16.5') 
 
Target Markets:
Any Company that would Exhibit at Trade Shows or have a Need for Outdoor Flags, Roll-Up Banners, or Foam Flooring. 
 
Sales Opportunity:
This is an opportunity to get in on the ground floor and work with a new, growing company that was created on a basis of exceptional customer service, added value and transparent pricing. Our team includes event industry experts, talented designers and great logistics and operational support.

We are on a mission to provide the smoothest ordering process available for our customers. As a team, we understand the value sales reps can bring so we strive to offer generous commission packages as well as exclusive protection for your territory. If you are interested in learning more please don't hesitate to contact us so we can discuss our product line and the opportunity. Thanks for considering working with us.
 
Company ID: 112168 - Click Here for Full Details
Product Lines:
Custom Contract Manufacturer of Wire Harnesses, Complex Cable Assemblies, and Overmolding. 
 
Target Markets:
Industrial Automation
Transportation
Medical
Avionics/Military 
 
Sales Opportunity:
Exceptional very high quality manufacturer of wire harness, cable assemblies and overmolded products. Maintains 25ppm rating with ITAR, ISO:9001:2015 registration as well as UL, UL-c, etc. Engineering for product design in house, mold making in house as well as 3D models. Engineering driven and solutions oriented selling to a diversified market. Customers include Boeing, Steris, ABB, Parker Hannifin and others. Great opportunity for an aggressive rep firm.
 
Company ID: 112825 - Click Here for Full Details
Product Lines:
Premium Purified Water.

Distribution: Nationwide. Sizes Available in 12 oz., 16.9 oz., and 20.oz Size Bottles. Caps come in Blue and White Turn Off Caps and Sports Caps. Other Facts: Alkaline Water is Available for Home and Office Delivery Available in 1 Gallon and 2 Gallon Sizes. 
 
Target Markets:
Supermarkets, Mom & Pop, Retail, Hospitals, Sports Arenas, Walmart, CUTSCO, Whole Food Stores, etc. Schools, etc. 
 
Sales Opportunity:
According to US Bottled Water Market Statistics & facts, the US market was the largest bottled water consumer market in 2016 with bottled water sales volume of about 12.8 billion gallons. This figure is the highest volume of bottled water ever sold in the United States. This is a good opportunity for our team to capitalize on.

The top selling brand names have captured more than 55% of the market, but private label companies still have the chance to create a niche for their products. Americans spent an average of $11.12 billion on nearly 9.7 billion gallons of water, putting the average cost at about $1.22/gallon. Delivery cost of our bottled water range from $0.29-$0.33 cents per 12 oz bottle, and 16.9 oz sizes incentivizing good commission and other financial compensation arrangements.
 
Company ID: 113854 - Click Here for Full Details
Product Lines:
Electrical Harnesses for Power Supplies and Amplifier Systems, Interconnect Cables, Line Cords, Single Phase and Three Phase.

Euro and US. Prototype and Production Harnesses, All Turn-Key. 
 
Target Markets:
Electronic Assembly Companies. 
 
Sales Opportunity:
Looking for independent Reps. Compensation: commissions and bonuses. We sell quality services (do not tolerate errors). 16 years in business, and intend to be around a long time. We work hard to earn our customers and reps trust.
 
Company ID: 113824 - Click Here for Full Details
Product Lines:
Our company Manufactures Shipping Monitoring Devices that Detect G Force Shock and will Indicate when a Specific G Level is Exceeded.

We Offer Disposable Impact Indicators, Re-Usable Shock Indicators more Advanced Digital Devices that Monitor and Record Impacts and Temperature. 
 
Target Markets:
Power and Energy (e.g. Transformer Manufacturers), Aerospace, Military and Defense, Marine & Offshore, Aviation, Medical Instrument Manufacturers, Nuclear, Technology (Servers & Routers), Instrumentation, Glass Nanufacturers, and others. 
 
Sales Opportunity:
We are looking for Manufacturer Representatives to sell our products in North America. Our products are quality manufactured devices that are precise and reliable. We provide excellent compensation on the products. Our technical and sales support is excellent and responsive. We provide training on our product line and our customer service is friendly and supportive. We are also proactive marketing the pour products and have strong web/market presence.
 
Company ID: 113732 - Click Here for Full Details
Product Lines:
Brake Disc and Brake Drums for Automotive Use for Passenger Cars and Light Vehicles. 
 
Target Markets:
Regional Distributors of Auto Parts. 
 
Sales Opportunity:
Our company is located in South Brazil. We manufacture brake disc and drums with international quality certifications ISO and TS. Our company manufactures several products to your market.
 
Company ID: 113699 - Click Here for Full Details
Product Lines:
Design and Manufacturing of Electronic Transformers for Industrial Applications.

Small to Medium Production Volumes. Innovative Designs and Quick Turnaround Times. 
 
Target Markets:
Manufacturers of Power Supplies, Test Equipment, Specialty Lighting Applications and Equipment, Medical Electronics, Avionics. Selling mostly Nationally and to Limited Foreign Customers. 
 
Sales Opportunity:
Looking for ambitious reps to dramatically increase our sales. Opportunity to acquire a share in the business. Currently I have no sales force. Sales by reference through established engineering contacts.
 
Company ID: 113186 - Click Here for Full Details
Product Lines:
Our Turnkey Build-to-Print and Custom Manufacturing Services include CCA, Conformal-Coat, Assembly, Test Design, Environmental Qualification, and a Host of Specialized Requirements for the Design and Production of Products.

Solid portfolio of existing products. 
 
Target Markets:
Primarily Defense/Aerospace Industries. 
 
Sales Opportunity:
Our unique services and processes have been honed on our parent company's product lines and those of other defense primes. We have the physical and process infrastructure to take on complex defense electronics assemblies and complete box builds. In addition, for products that are lower TRL we have a mature NPI process to help ensure a seamless transition from the lab to manufacturing and ultimately the field. We have an existing and positive track record with several large defense prime contractors and looking to grow our footprint within the Northeast. CCA has also been recently added to our portfolio to round out our EMS offering.
 
Company ID: 110419 - Click Here for Full Details
Product Lines:
Rod Ends and Spherical Bearings Made in The US.

We are a Small Manufacturer that Offers Quick Delivery on Standards and Specials. 
 
Target Markets:
Aircraft, Industrial Distributors, Race Car Builders, Packaging Equipment Users, Hydraulic Cylinder Re-Builders among others. 
 
Sales Opportunity:
We are an established company looking to grow our customer base. We have some established accounts and are looking for someone to call on these as well as establish new customers. Our company makes a high quality product and a competitive price with some of the best lead times in the industry.
 
Company ID: 111437 - Click Here for Full Details
Product Lines:
Warning Lights, Tower Lights, Beacons, LED Tower Lights, LED Work Lights, and Electric Sounders. 
 
Target Markets:
All Manufacturers such as Automotive, Machining Tools, Semiconductors, Energy, Pharmaceutical, Oil and Gas, Ship Building, Food, Packaging, BIO, etc. 
 
Sales Opportunity:
We would like to seek robust sales partners in signaling device distributors and end-users focusing on automation industries. Similar manufacturers are such as Patlite, Werma, Banner Engineering, Auer, E2S, Edwards Signals, Pfannenberg, etc.
 
Company ID: 113333 - Click Here for Full Details
Product Lines:
Our product is a Location Tracking System (LTS) RFID active tag with sensor capabilities that adds the ability for the tags to “talk” to each other rather than communicating through fixed RFID readers and antennas. 
 
Target Markets:
No more costly requirements to install ethernet cabling, power, mounting brackets and active RFID transponder antennas in multiple locations. 
 
Sales Opportunity:
Using this product with known locations, you can create fixed locations within your facility, then use our mobile unit attached to your high value assets to track their location. It works seamlessly with our software solution! This! is an RFID asset tracking software solution, that can dynamically display the location of your unit onto a map of your facility. Manufacturing, Oil and Gas, MRO's, CNC shops. Submit a sales inquiry to us and we will send you a PDF on reason why to sell our technology.
 
Company ID: 113531 - Click Here for Full Details
Product Lines:
Systems Integration, Engineering & Machine Building.

We Provide Turnkey Test System and manufacturing System Automation Development and Design. Our Experienced Engineering Team can Handle a Project from Concept through Commissioning. 
 
Target Markets:
We have Extensive Experience Building Machines and Systems for:
Light Rail Mass Transit Test Systems
Assembly & Test for Industrial Manufacturing
Defense Systems including Explosives Processing
Thermal-Fluidic Systems for High Performance Computing 
 
Sales Opportunity:
We are looking for sales representatives to expand our established & growing business. We offer the opportunity to augment existing sales pipelines with value added systems integration & machine building capability. We offer responsive sales support to get accurate quotes into your contacts hands quickly and can offer high quality, high value solutions for test automation & custom machine building. We are a National Instruments Alliance partner for test solutions.
 
Company ID: 110320 - Click Here for Full Details
Product Lines:
PCBs - Printed Circuit Boards:
Single Side - SS, Double Side - DS, Multilayer PCB, Multilayer Boards, MLB, ML4, ML6, ML8, ML10, ML12.
Thermal Management Heatsink Metal Core PCB, (Al/Cu) Multilayer Metal Core Aluminium PCB, RF Application Boards, Rogers, Taconic for RF Amplifier, Filters & Antenna. 
 
Target Markets:
OEMs, EMS, CMS
Power Electronics
Automotive
Consumer Electronics
Lighting
Computer & Business Equipments
Defence & Aerospace
RF & Communication
Instrumentation & Medical Electronics 
 
Sales Opportunity:
Sales Reps Required to Work on Commission Basis! We are looking for "Great Sales Reps* who will work for commissions only.

Our company is a leading PCB manufacturer in India exporting PCBs to USA, Europe & Israel. We are a One Stop Solution and can support for Prototype, Quick Turn PCBs, High Mix Low, Medium or Large Volume Production of Bare PCBs. We have capabilities to manufacture PCBs up to 12 layers to very demanding specifications. We are in process to set up a sales office in US to support reps for day to day operations.

We can support for Single Side, Double Side, Multilayer, Metal Core, and RF & Comms grade Rogers PCBs. We have representatives in the US & Europe and are looking to further expand our network via representatives. High Quality PCBs and On-Time Delivery are key to our success over these years. Service you can trust.

We are looking for knowledgeable, experienced candidates or companies who can offer local support for customers and grow our business working on commission basis. Sales Representative to work to expand the existing tried and tested business and bring growth and earn commission. Interested candidates may please submit a sales inquiry to us immediately.
 
Company ID: 113455 - Click Here for Full Details
Product Lines:
We Manufacture State of the Art Pressure & Temperature Sensors and Level Sensors. 
 
Target Markets:
We Typically Sell to OEMs, Aerospace, Defense, Process, Oil and Gas Industries. 
 
Sales Opportunity:
We have been in business since 2009 but have been focused primarily on a large contract with NASA to develop a SOTA sensor for Mars. We are now ready to expand and are looking for reps. We offer very competitive commissions and are willing to assist and train reps.
 
Company ID: 107098 - Click Here for Full Details
Product Lines:
Metal Bar/Section Shears for the Forging and Mass Production Industries.

We are the Only Company that Shears Metal Bars and Cross Sections such as: Flats, Angles, Extrusions, etc. with our Original Patented Tool Units. These Units are then Assembled into Economical H-Frame Presses. 
 
Target Markets:
Forging Manufacturers for Auto/Trucks, Aircraft/Aerospace, Bolts/Fasteners, Agriculture/Mining, Oil/Gas, Valves/Fittings, etc. also Metal Suppliers, Construction Angles. 
 
Sales Opportunity:
Our bar/billet shears produce non-shock, quality square faced cut bars (required in the forging industry) without saw scrap, costly saw blade replacements and in greater speed/quantities.
 
Company ID: 112105 - Click Here for Full Details
Product Lines:
We are a Job Shop Specializing in Precision Sheet Metal Fabrication for Food Service Products, Telecommunications, Computers, Gaming, Electronics, Banking and Medical Industries.

We Fabricate Anything from Small Flat Parts to Large Complex Assemblies. Located 20 miles outside of Chicago, IL. 
 
Target Markets:
Banking
Computers
Electronics
Food Service
Gaming
Industrial
Machinery
Medical
Military
Railways and Trains
Telecommunications
And any other market that requires sheet metal parts. 
 
Sales Opportunity:
We offer 10% commission. Established in 1967 our company has Developed into a Proven Leader in the Sheet Metal Fabrication Community. The most modern and high-tech systems and equipment are utilized, with a facility large enough to support and process our customers finishing, assembly, and JIT programs.

• Metal Fabrication Capabilities: Small Components, Large Components, Assemblies.
• Fabrication Method: Laser Cutting, CNC Punching, Forming, Polishing, Welding, Hardware Insertion, Assembly, Finishing.
• Materials: Aluminum, Cold Rolled Steel, Galvanized Steel, Hot Rolled Steel, Stainless Steel.
• Raw Material Forms: Sheet, Plate, Bar Stock, Tubing.
• Material Thickness: Min .020" to Max .5", Maximum Length: 120", Tolerance (+/-): ฑ.003".
• Additional Services Provided: Assembly, Painting, Plating, Silk-Screen, Storage.
• Production Volume: High Volume, Low Volume, Medium Run, Prototype, Short Run.
• Lead Times: 3 - 5 weeks, Lead Times for Quote: 24 hours.

We invite any sales reps that have experience in this industry and are confident they can help us expand our customer base.
 
Company ID: 113390 - Click Here for Full Details
Product Lines:
Anemometers, Duct Air Leakage Testers, Flow Hoods, IAQ Monitors Particle Counters. 
 
Target Markets:
HVAC, Cleanroom, Industrial Flow Testing. 
 
Sales Opportunity:
Our company has delivered the best measurement solutions with its products and services that adapt precision measurement technology for fluids and particles. We are contributing to technological innovation and quality improvements for the processes of quality and environment management.

Sustaining human well-being in the areas of environment, health and energy have always been a primary focus of our company. We develop leading technology with the goal of maintaining health and safety in industries including automobile, aerospace, semiconductor, electronics manufacturing, heavy industry, steel, shipbuilding, pharmaceutical, biotechnology, food processing, medical, construction and civil engineering.
 
Company ID: 110374 - Click Here for Full Details
Product Lines:
Turnkey Custom Tool Kitting Services for Drawers, Boards, and Cases.

From the Simple to the Complex we have been Custom Tool Kitting since 1995! 
 
Target Markets:
Manufacturing, US Military. Commercial Equipment Manufacturing Facilities including but not limited to Agriculture, Wind Turbine, Mining, Highway Construction, Aircraft, Train, Oil Rig, and Drilling. 
 
Sales Opportunity:
Our free sample board is an incredible conversation starter. You will have more fun and get more customer engagement by showing our samples than most products you have been associated with. When you put our sample in your customers' hands they will immediately "get it". Our custom kitting services are currently being used in every branch of the US Military, aerospace manufacturing, mobilization, and homeland security surveillance. Our non-military related manufactures include the worlds' largest consumer brands.

* Free 8" sample boards
* Free 15-piece prototype drawer

We use high-end, 4 lb. closed cell, cross-linked polyethylene foam with a contrasting 1/8" PVC yellow backer. Complete laser etching services for both tool and tool cavity available. Submit a sales inquiry to us today for free samples and full color brochure to learn how you can have more fun and make more money selling an exclusive, one-of-a kind product!
 
Company ID: 113169 - Click Here for Full Details
Product Lines:
Our Company Helps Companies, Start-Ups to Fortune 500's Develop New Products.

Our Services include: Conceptual Storyboards and Marketing Presentations, Industrial Design, Mechanical Design, Mechanical Engineering, Electronic Design, Prototype Services, Documentation, and Sustaining Engineering. 
 
Target Markets:
We have been Fortunate to have Designed Products, Built Prototypes, and Helped our Clients Secure IP Across a Wide Variety of Industries.
Such as: Medical, Dental, Food Service, Industrial, Consumer, Sports, Automotive, Aerospace, Recreational, Marine, and Agricultural. 
 
Sales Opportunity:
This is a great opportunity for a sales representative to use our services and design expertise as an opening to sell other products to these companies. As part of our team you will have an inside edge and truly understand the clients needs for other purchased products.

We value your efforts as a sales professional and our commissions will reflect this. We look forward to creating a lasting relationship that will be enjoyable and beneficial for everyone involved. We will provide excellent service to the clients you refer so that repeat business will be assured for many years into the future.
 
Company ID: 111396 - Click Here for Full Details
Product Lines:
State of the art Industrial Surface Cleaning Equipment with High Pressure, Wastewater Recovery, Patented Filtration, and Recycling of the wastewater for Continued Cleaning.

Compact Footprint Coupled with a Smart Design and Best in Class Componentry Sets our Equipment Apart from the Competition. 
 
Target Markets:
Facility Maintenance companies, Environmental Services, Emergency Response Recovery, Municipalities, Ports, Airports, Petrochemical, Food and Beverage Manufacturers, Resorts and Theme Parks, Service Contractors, Equipment Rental Companies. 
 
Sales Opportunity:
We designed a highly engineered system with a proprietary (patent pending) filtration that allows the effective cleaning of facilities and allow Zero wastewater to escape. Exceed all EPA wastewater regulations.

We recover at point of contact, filter and recycle through for continued cleaning. Every aspect of the equipment was designed for the industries we sell to for staying compliant with all wastewater regulations. We currently have no real competition with the same capabilities. Our products range from $80K to $165K.

We have several drivetrains including a gas fueled injected V Twin 7x12' tri drive trailer unit. Coming next quarter is a state of the art Hydro Drive Power Take off Truck mount platform. Nothing like it in the industry. Our Filtration is the Key Component that makes our equipment best in class.

Our commission structure is highly competitive as is our commitment to our sales agents and our customers. We are a new company but have built a solid foundation with thousands of hours of real world paid testing. So far every City, Airport, and client that has seen our equipment has had high praise for the design and quality. We will support our sales reps with everything needed to present the opportunity and will have an internal support for technical questions and service.
 
Company ID: 113093 - Click Here for Full Details
Product Lines:
Three, Four, and Five Axis Milling of Complex Parts.
3D Surfacing Capability
Turning Capability up to ุ30''
Swiss Lathe Capacity up to ุ1-1/4''
Ability to Work with Difficult to Machine Materials. Ability to Work Directly from Customer Supplied CAD Models. We are Certified to ISO9001 and AS9100. 
 
Target Markets:
We Primarily Serve the Aerospace Market. We also Serve Manufacturers of Castings, Conveyor Systems, Hydraulic Manifolds, and Small Cylinders. We Specialize in Solving Problems Caused by Difficult to Machine Materials and Developing Processes to Simplify Complex Parts. 
 
Sales Opportunity:
Our company is a clean state of the art manufacturing facility that maintains industry certifications that most other suppliers don't have. We utilize an ERP system for all job information, we maintain our cad / cam software to the latest revisions and have a knowledgeable staff to promptly interact with our customers. Our equipment is state of the art and is all less than 10 years old.

We offer quick turnaround on quotes as well as the technical expertise to be able to help our reps with the difficult questions that arise in this industry. We offer a commission based incentive package that is based on the shorter run/higher dollar value parts that we produce.
 
Company ID: 113216 - Click Here for Full Details
Product Lines:
Fastener Retainers.

We Offer a new Unique Retainer System for Bolt Retention. 
 
Target Markets:
Automotive, Industrial, Defense, Aerospace, Heavy Trucks. 
 
Sales Opportunity:
We offer a new unique bolt retainer system. Our system uses a chemical bonded thermoplastic to create a soft pliable retaining ring. This ring holds the bolt in place before assembly and during transit. No tooling or equipment required, no change in torque and clamp load, harmless to engine components and fluids, precise tolerances and high visibility color.

Only several competitors in the industry and our retainer is Lower cost than anyone. Automotive Approved and Certified, ISO certified, Minority certified company (MBE). Commonly used on powertrain, body assemblies, oil pans, valve covers, alternators, generators, water pumps, electronic devices, hevac systems.
 
Company ID: 113213 - Click Here for Full Details
Product Lines:
Drill Bushings, Dowel Pins, Specialty Cutting Tools, and much more. 
 
Target Markets:
Aerospace, Automotive, Manufacturing Industries, and more. 
 
Sales Opportunity:
Looking to grow your line with a quality dependable product with a family run company that has been around for 100 years? A customer-centric and sales driven manufacturer is looking to grow our distribution channel. Our company is proud to provide independent representatives with the quality products and support that you need to be successful.
 
Company ID: 113194 - Click Here for Full Details
Product Lines:
We are a CNC Machining and Turning Manufacturer.

We are Specialized in the Production of Precision Parts. We are a Hong Kong Registered Company with Branch Office in Shenzhen and factory in China. Staffed by a Highly Qualified Team of Design, Production, and Quality Engineers. 
 
Target Markets:
Companies in the Aerospace, Medical, and Industrial Segments that Needs CNC Machining and Turning Parts for their Products. 
 
Sales Opportunity:
Our company have strong engineering support and capable in making complex parts at a competitive price. We also have experience working on turnkey projects including die casting, plastic injection molding and sheet metal stamping. We have been supplying products to various listed companies in the US. Marketing materials will be provided to you for promotion. Generous profit sharing scheme up to one third of the net profit will be awarded for sales order closed. Commission will be calculated as long as there's an order.
 
Company ID: 79304 - Click Here for Full Details
Product Lines:
A Unique Nylon Swivel Belt-Clip for Two-Way Radios. 
 
Target Markets:
Anybody that Uses the Motorola ASTRO XTS 3000-5000 Series Portable Two-Way Radio, Motorola Radio Dealers, Uniform Shops, Public Safety, Police/Fire Departments, Military and any Industrial Radio Users, Utilities, Airport TSAs, Private Security, Firemen, Coast Guard, Training, Businesses, Admin Attire. Anybody who Needs to Carry a Two-Way Radio. 
 
Sales Opportunity:
Our product is an affordable $27.95 Add-On radio accessory. Designed for Detectives, undercover investigators, command staff, firemen, and those in training or Admin attire. Replaces Original Cumbersome OEM Straight Belt-Clips. Allows your radios to swivel out of the way when met with obstructions. It is Useful for anybody needing a comfortable effective carry solution for their two-way radio.

My wife and I own this company and we are both LAPD officers, we both have an interesting personal and law enforcement backstory that helped initiate the development of our product. Our story made national news and media over a period of several years starting in 2006 and I believe adds a good credibility factor to us as manufactures in the public safety product field. I also think this will be very helpful in opening conversation and sales discussions. Commission Sales Representatives needed.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2019
LINKS | SITE MAP | TERMS OF USE