Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Transportation\Motorcycles
Click on Company ID to View Full Details
Company ID: 109638 - Click Here for Full DetailsUpdated
Product Lines:
Our Line of Products that are Modular, Multi-Tools for the Modern Lifestyle that Consolidates Keys, Pocket Tools, and Smart Tech into a Single Customizable Device. 
 
Target Markets:
Retail Channels include:
• CE
• Locksmith
• Hardware
• Specialty (e.g. Brookstone)
• Catalog
• Outdoor
• Military
• Auto Accessories
• Promotional Products & Corporate Gifts
• eCommerce 
 
Sales Opportunity:
Our products are considered an universal access solution that bridges the gap between the conventional keychain crammed with an array of everyday carry items and a completely connected world.

Our product line has been a finalist for Inc Magazine’s inaugural Best in Class Design Awards. We have been featured in a wide range of media including ABC News, Chicago Tribune, CNET, CNN, Digg, Discovery Velocity Channel, DIY’s I Want That, Engadget, EverydayCarry, Examiner, Gadgeteer, Good Morning San Diego, Huffington Post, Military, Motorcyclist Magazine, Motor Trend Magazine, Recoil Magazine, SuperStreetBike, TechCrunch, TechSavvyAgent, Time, TODAY Show, and Wired.

In short, our product is an indispensable tech gadget, a must-have fashion accessory, and the perfect gift. From smart locks to keyless entry to electronic files to a bottle of your favorite beverage, our product provides secure access to your world and equips you with peace of mind in preparation for your next adventure. We offer training, samples and sales collateral. We also pay top commissions as well. We look forward in talking to you! Thanks!
 
Company ID: 74339 - Click Here for Full DetailsUpdated
Product Lines:
Electronic Manufacturing Specializing in Wire Harnesses, Cable Assemblies & Electro-Mechanical Assemblies. 
 
Target Markets:
Aerospace, Automotive, Defense, Gaming, Industrial, Instrumentation, Medical, Telecom/Networking, Transportation, Utilities. Any industry that needs to get power and/or data from one point to the other. 
 
Sales Opportunity:
With over 30 years of experience in the electronic industry, we are one of the most complete, technically advanced, cable assembly, and wire harness shops around. All work is manufactured to IPC standards and is UL approved and audited quarterly. We are also ISO 9001:2008 Certified.

We're tooled up for many different manufacturers such as TE, Molex, Hirose, Delphi, JST, FCI, Panduit, T&B, and many more.

What sets us apart from the competition is our custom IT system with an in-house software engineer. Our system is the most comprehensive because it's fully customized to our manufacturing process. Our system is fully integrated and encompasses everything from the production/assembly process to inventory to quality control and every other aspect of the business. This translates to a lower cost structure with very competitive pricing. It also leads to full product traceability, which is critical to customers.

We have a history of working with our customers to develop programs that meet their needs. Programs like Kanban, Just-In-Time, and even consignment.

With a rep/principle partnership our philosophy is very simple; we both have to be happy or it won't work. We're looking for a long term and profitable partnership. All of our reps are fully supported with inside sales support and our commission structure is competitive and negotiable. We provide various marketing materials and are open to any suggestions on what you need to sell our line.
 
Company ID: 107173 - Click Here for Full Details
Product Lines:
Cold and Hot Aluminum Forgings as well as High Volume Precision Machining Capabilities of All Alloys including: Steel, Cast Iron, and Aluminum Die Castings. 
 
Target Markets:
Ordinance/Military Selling to Machine Houses, Automotive Selling to OEMs, Commercial Selling to OEMs. 
 
Sales Opportunity:
Michigan manufacturer has a great opportunity for seasoned individuals who have contacts in all the right organizations. We are a very competitive manufacturing organization that utilizes technology and know how to be the best in class supplier.

We have a current customer base of both Automotive and Non-Automotive organizations and are looking to expand our reach through individuals with established contacts and opportunities. If you are an experienced sales professional looking for a great opportunity to prosper, please contact us for more information and to eallow us to discuss a potential fit.
 
Company ID: 111555 - Click Here for Full Details
Product Lines:
Custom CNC machined parts. I have experience manufacturing parts for firearms, aircraft, fluid handling, satellites, custom CNC machines, tank companies, etc. 
 
Target Markets:
Our target customers include, but are not limited to, manufacturers of: custom firearms, industrial machinery of all types (including mills, routers, and 3D printers), aircraft, automobiles, fluid handling equipment, aftermarket products, and industrial containers. 
 
Sales Opportunity:
I have 15 years of experience as a machinist, 9 of which have been spent supervising machine shops within two different companies. My CNC machine shop is currently functional, and I have been shipping parts to satisfied customers for three months now. My current customers include a custom 3D printing company as well as a custom firearms manufacturer.

Currently I have a Haas VF3 SS vertical milling machine with a 4th axis rotary table. I use Mastercam for all of my CAD/CAM work, and have a great deal of experience with my machinery and software. I am in the process of building a customer base, and am in need of a salesperson that can bring in profitable work so I may continue to build my recently formed business, and expand my capabilities. I am currently available for short notice work. My quality standards are very high, and complete customer satisfaction is my goal. This is a good opportunity to work with someone that is very motivated and experienced, with plenty of energy and enthusiasm.

Thank you.
 
Company ID: 110031 - Click Here for Full Details
Product Lines:
Write a deal today and get paid tonight!

Last Month we Sent almost 10,000,000 Messages to Millions of Subscribers via text marketing. We have tens of thousands of Clients Nationwide & have Only 2% Leaving us with More Becoming Clients, Daily. We need B2B Agents & Managers! 
 
Target Markets:
Every Business, Non-Profit, Religious Organizations, and Educational Institutions in the US that will Benefit from Text Marketing. This is a Wide Open Market. 
 
Sales Opportunity:
Extremely Realistic First Year Earnings of $50,000 to $125,000 or more. You can earn commissions of $748 per sale. We Pay Daily! Plus, you can earn hundreds per month, every month on the same merchant with Lifetime Vested Residuals! Agents can easily sell 10+ deals a month. We provide all training, sales material, support, & management to be successful. Management opportunities are also available.
 
Company ID: 107098 - Click Here for Full Details
Product Lines:
Metal Bar/Billet Shears for the Forging and Mass Production Industries.

We are the Only Company that Shears Metal Bars Based on our Original Patented Tool Units. These Units are then Assembled into Economical H-Frame Presses to Form Economical Shears. 
 
Target Markets:
Forging Manufacturers for Auto/Trucks, Aircraft/Aerospace, Bolts/Fasteners, Agriculture/Mining, Oil/Gas, Valves/Fittings, etc. also Metal Suppliers, Construction Angles. 
 
Sales Opportunity:
Our bar/billet shears produce non-shock, quality square faced cut bars (required in the forging industry) without scrap, costly blade replacements as with saws and in greater speed/quantities at prices comparable to saws.
 
Company ID: 96261 - Click Here for Full Details
Product Lines:
Electric Power-Assist Bike
eBike
Electric Motor Bike 
 
Target Markets:
Bike Stores
Bike Wholesalers
Bike Distributors
Police Departments
Security Forces
Beaches and Resorts
Outdoor Equipment Sellers 
 
Sales Opportunity:
We have 3 products: Galaxy PAS eBike Cruiser with Chain Drive and Power Assist, Galaxy eBike Mountain with Chain Drive and Power Assist, and Galaxy eBike Folding with Chain Drive and Power Assist. These bikes are designed for reliability, performance and quality for the day-to- day riding and demands that a Police officer places upon a bike.

All three (3) PAS eBike models Mountain, Cruiser and Folding are ideal and designed to support various field requirements such as airports and ports patrol, downtown city areas, universities and college security, city parks, beach security and other cruising applications where simplicity, safety, reliability and cost effectiveness are of paramount importance.

Similarly, Galaxy PAS eBikes are strong enough to withstand demanding police and security field operational loads and are certainly strong enough to support demands of bike enthusiasts for recreational use. We have a independent sales team focusing on the States of Florida and Louisiana.

By later this year, there will be several police departments and airports in Florida start using our eBike product. Our company has two brands Galaxy PAS eBIKE, and Hummr eBIKE. Galaxy would mostly for western US and theme parks like Disney. Hummr would be used in the East Coast and for police departments.
 
Company ID: 76416 - Click Here for Full Details
Product Lines:
In Business since 1912, we are a leading Manufacturer of High Volume, Precision Metal Stampings and Assemblies, and the Tooling to Produce Them.

In addition to Precision Stamping we have ~65 Multi-Axis CNC Machining Centers, Laser Welding, Laser Cutting, Metal Finishing, and Pad Printing. 
 
Target Markets:
We Sell to OEMs in the following markets: Medical (Device and Drug Delivery), Automotive, Aerospace, and Consumer Goods. We also sell to Molding Companies that do Insert Molding. We would like to Penetrate the Firearms and Electronics Markets. 
 
Sales Opportunity:
We are looking for Manufactureres representatives in Southeast and West Coast US, Canada, and Mexico. Our company is one of the most respected tooling and metal stamping companies in the country and we are looking to partner with sales organizations that can help us grow and diversify.

Being a contract manufacturer we are capable of producing precision parts, on time for any industry. Our engineering and die design departments have the experience and skill to handle the most complex projects from prototype through production.
 
Company ID: 110857 - Click Here for Full Details
Product Lines:
- Signs: LED, Neon, Non-Illuminated
- Open Signs: Store Hours Signs and other Signs Used in and by Retailers, or Sold by Retailers.
- In-Store Displays
- Sales Promotion and Premium Items 
 
Target Markets:
Retailers, QSR's, Consumer Goods Companies, any Company with a Retail Presence. We Work with the Nation's Largest QSR's, Retailers and Breweries. We have a very Small Sales Force. If you Work with any Company with a Retail Presence, we have a Product you can Sell. 
 
Sales Opportunity:
We have 15 years experience in designing and producing illuminated signs and displays. You have already seen our signs in the nation's largest sub sandwich chains. Any tavern or packaged goods stores, major catalog retailers and the largest DIY home improvement stores. We design and engineer in the US and manufacture off-shore to get the best pricing.

If you call on retailers or consumer goods companies that use signs and displays we can provide product, sales support and customer service. If you have accounts that resell Open signs, business hours signs and the like we can provide that product so your customer can resell. We have an eager team to back up your efforts, and a strong reputation to help you sell in. And company management grew up in sales, we get it.

Please submit a sales inquiry to us!
 
Company ID: 110141 - Click Here for Full Details
Product Lines:
Gasoline and Diesel Fuel Additives.

An All-in-One Water Remover, Stabilizer, Lubricator, Cleaner and Emission Reducer. 
 
Target Markets:
Retail, Distribution, and Service Companies Accommodating the Marine, Agriculture, Automotive/Trucking Industry. 
 
Sales Opportunity:
We provide a product that truly works! Through easy demonstration we can show why fuel users should be treating with our additive and how our additive differs from the competition. We provide our reps with all the marketing materials they will need to start sales immediately. Sales will be done COD and drop shipped if not ordered by the pallet. We work distributors on a revised pricing structure and or Independent Reps will be paid commission on sales on the 20th of each month.
 
Company ID: 109866 - Click Here for Full Details
Product Lines:
Recognized Leader in Metal Stampings, Fabrications, Vertical Machining, Welding, Assembly for over 75 years.

Our Company Specializes in Short to Medium Run Metal Stampings, Fabrication, Machining, and Assembly Complement the Product Offering. 
 
Target Markets:
Medical, Aerospace, Agriculture, Automotive, Industrial, Recreational. Our Current Customer Base is National and of High Quality. Reps sell to Global Supply Managers, Product Engineers, and Purchasing Managers. We Currently Manufacture Parts and Assemblies to Major Corporations with Many Current Accounts. 
 
Sales Opportunity:
Represent our product offering on a commission basis. Needs are in the New England area including Western PA, NY, NJ, CT, MA, NH, VT, Maine, MD, DE. There are many existing accounts that are established. I am looking to grow in that market. The selected agency will service two divisions within our company and have an immediate commission base. Our company participates in trade shows and other sales activities to assist in generating leads. This position has the potential to grow the established territory in a very short period of time.
 
Company ID: 109859 - Click Here for Full Details
Product Lines:
Standard Automation Equipment around our Four Core Competencies of Plastic Joining, Precision Fastening, Leak Testing, and Clip Installation. 
 
Target Markets:
Automotive and Medical OEMs. 
 
Sales Opportunity:
The owner of AMS was a manufacturer's representative for 18 years before founding the company. AMS understands how to support independent representatives. We have a dedicated sales development representative/inside sales support staff to help with prospecting and lead generation. Our company was voted one of the fastest 55 small growth companies in Cincinnati in 2016. We are looking for exclusive representation in the state of Indiana and Michigan.
 
Company ID: 109708 - Click Here for Full Details
Product Lines:
We Sell a Growing Line of Consumer Electronics with a Particular Focus on Portable Jump Starters.

Our Products Feature Industry Leading Features, Safety, and Appeal to a Broad Market. 
 
Target Markets:
Automotive Retailers
Auto Parts Retailers
Powersport Retailers
Consumer Electronic Retailers
Hardware Stores
Chain/Franchised Retailers 
 
Sales Opportunity:
We are a growing company that has had strong success with our product line of portable jump starters. We have proven our products through independent retailers and through successful wholesale partnerships (see our Canadian site). Our products have a broad market, every vehicle on the road today should have one as part of their safety kit.

We are seeing incredible demand for our products but are aware that there are many people who have yet to see a similar product. We need to get our products in front of more consumers. We offer an attractive product with many selling features. We have an automated account setup procedure for new retail accounts with easy reporting.

Online ordering with 2 day shipping for retailers and strong margins for our sales team as well as our retail partners. We're committed to the success of our partners and are investing heavily in new products to complement and grow our existing lineup.

Our products also offer strong promotional opportunities with custom branding and design available. Most importantly, we back all our products with personalized customer service. We want to see our brand grow and we understand the importance that strong customer service has in differentiating ourselves and building those long term relationships.
 
Company ID: 109345 - Click Here for Full Details
Product Lines:
Custom Machining and CNC Services which includes Sheet Metal and Welding of All Types of Material. 
 
Target Markets:
Designers and Manufacturers in Automotive, Aerospace, Medical. Anyone who is Currently Outsourcing CNC Fabricated Parts and Assemblies. 
 
Sales Opportunity:
We are a small company with low overhead with 4 generations of fabrication experience. We are capable of the design and manufacturing of all types of parts and sub-assemblies and would be a good fit for many different types of companies who are currently our sourcing this type of work.
 
Company ID: 109253 - Click Here for Full Details
Product Lines:
Dedicated Sports Camera System and Dash Cameras for Motorcycles. 
 
Target Markets:
Motorcycle Dealers, Repair Shops, Accessory Shops, and Custom Bike Manufacturers. 
 
Sales Opportunity:
We are a California based company, offering longest warranty in industry (one year parts and labor). Our new line of dedicated motorcycle cameras are unique in the market. Fully automated camera system that instates on bikes. Test marketed for last 9 months, brought overwhelming interest in the concept. Opportunity to start working with a winning item at the starting point. generous commission base.
 
Company ID: 29646 - Click Here for Full Details
Product Lines:
Contract Manufacturing in CNC Machining. 
 
Target Markets:
Robmar Precision Manufactures CNC Parts for the Aerospace, Medical, Defense, Energy, Automotive Industries. We Work with OEM's, Tier I & II Suppliers. Robmar likes to Target Customers that can Become $50K+ in Revenues per Year. 
 
Sales Opportunity:
We are searching for talented Sales Professionals who can bring opportunities to the table. We offer excellent support for our sales representatives helping assist you in building long-term/strong relationships with your customers. One way we achieve this is with our unique Inventory Management Program that your customers will be attracted to.

This means repeat business is our goal. Our commission rates are always competitive and open for equitable conversations. You make the contacts and our inside sales representatives will back you up with responsive service in anyway needed. Never letting your customer feel not important, whether information flows thru you or straight from us.
 
Company ID: 102108 - Click Here for Full Details
Product Lines:
We are a Direct Manufacturer Positioned as a Pop-Up Expert.

We make a lot of Pop-Up Items, from Pop-Up Soccer Goals for Youngsters to Garden Cages and Grow Tunnels for Garden Lovers, as well Pop-Up Play Tents for Kids. We also Welcome OEM or ODM Orders. 
 
Target Markets:
Distributors and Retailers (both online and offline). Garden Centers. 
 
Sales Opportunity:
1) We are a direct manufacturer that are innovative and care about quality.
2) We have a very good product development as well production team to stand behind our products.
3) Our products are generally unique.
4) We might offer free samples if necessary.
5) The rate of commssion is between 5% and 10% depending on the sales price. And commission will be paid when the transaction is over. The cargo is delivered, and the payment from the end customer is paid.
 
Company ID: 106551 - Click Here for Full Details
Product Lines:
Wire Formed Products, Targeting Non-Automotive Customers.

The Type of Products would be Hangers, Fasteners, Welded Sub-Assemblies, Threaded or Cold Headed Parts. 
 
Target Markets:
Industries that we would like targeted are Ag, Lawn and Garden, Medical Device, Furniture, and Display Industries. The region we are looking to target would be Michigan, Ohio, and Indiana. 
 
Sales Opportunity:
We are looking to diversify our product lines. We have a strong presence in the automotive market and wish to expand our products to non automotive markets. We are willing to discuss compensation and/or commission.
 
Company ID: 49544 - Click Here for Full Details
Product Lines:
We are a National Distributor of PVC Coated Fabrics for the Automotive, Marine, Contract Furniture, and General Upholstery Markets.

We have Four Regional Warehouses Located Conveniently Throughout the U.S. and Sell Through an Extensive Network of Regional Distributors and Manufacturers. 
 
Target Markets:
We are Seeking Reps for the following territories for Sales into the Automotive Aftermarket, Marine Markets, Contract Furniture/Restaurant Markets. Experience in Upholstery Industry a Plus. West Coast & Northwest U.S., western Canada, Mexico, Central America 
 
Sales Opportunity:
We are a High Quality producer/importer of PVC Coated fabrics. We sell through an extensive network of distributors located throughout the U.S. from four regional warehouses. We are interested in independent representatives for certain parts of the U.S. to take charge of our existing customer base and expand that base primarily with Upholstery Manufacturers.

Open territories include the West Coast, Northwest, Western Canada, Mexico and Central America. We are looking for Reps for exclusive representation to maintain current accounts and to actively bring new business. Must have experience in furniture manufacturing, automotive distribution markets.
 
Company ID: 100798 - Click Here for Full Details
Product Lines:
Automotive Cleaning and Cosmetics, Very High Quality Waxes, Grease Removers, Scents, Leather Cleaners, Tire Cleaners. 
 
Target Markets:
Car Washes, Retail Chains, Body Shops, Boat Repair, Marine Outlets, Distributors. 
 
Sales Opportunity:
This is a brand new company in the USA. We are the new importers for these products that have done so well in Europe. The products are not made in China, they are made in Poland and sold through distribution, retail, gas stations, and even at the high-end car dealerships around Europe.

We want to bring these products to the USA and Canada and seek reps to do that. Pricing is extremely competitive for the quality of the products and so are rep margins and commissions. We have packaging for retail, and commercial use so both markets can be served. Our site is now active and in English. Contact points to the MI HQ are listed online. Look us up at Autoland Car Care.
 
Company ID: 103809 - Click Here for Full Details
Product Lines:
Specialty Sport Earphones, Single-Sided Stereo-to-Mono Earphones, Earphone Accessories. 
 
Target Markets:
Retailers such as Running, Bike, Surf & Skate Shops, Sporting Goods Stores, Team Dealers, Gyms, Athletic Footwear Retailers, Convenience Stores, University Book Stores, and Pharmacies.
Bulk Purchasers such as Large Machine Shops and Manufacturers. 
 
Sales Opportunity:
We are looking to expand our sales channels. We have been in business since 2011, but have maintained a 'customers will find us' approach. Now we want to be proactive. We are willing to negotiate commission structures, and will provide all the support we can to make our line a success.
 
Company ID: 100857 - Click Here for Full Details
Product Lines:
Industrial and Specialty Brushes including Abrasive, Strip, Twisted-in-Wire, and Custom Engineered Brushes. 
 
Target Markets:
Primarily the Automotive, Aerospace, Material Handling, Medical, Chemical, Oil and Gas, Marine, and Transportation Industries. 
 
Sales Opportunity:
This niche is a specialty and custom engineered brushes to meet your customer's exacting needs. Tanis responds to customer requests quickly, has short lead times and does what is necessary to build long lasting relationships. Select territories exist.
 
Company ID: 54402 - Click Here for Full Details
Product Lines:
Polished Concrete Systems: Treatments, Colorants, Densifiers Expansive Concrete Components and Densifers for DOT Bridges & Highways. Expansive Grouts for Oil & Gas Industry. Concrete Fiber. Integral Troweled Cure for Polished Concrete. Concrete grinders, abrasives and concrete burnishers. 
 
Target Markets:
Selling to Owners. Selling Division 03 and 09 to Architects. DOT and Government, Concrete Contractors, Distributorships. Oil and Gas Industry. 
 
Sales Opportunity:
We have a system sell. This is perfect for Independent Reps, we have a lot of products. High commision. Great to add onto existing lines. Education provided. We support you with a CRM system for tracking custormers, projects, leads and all products and pricing entered. This is performance based, commission only compensation.

Polished Concrete Systerm: Ph Neutral. No issues with hazardous waste disposal. Our line of Densifiers are not water soluble and do not contribute to ASR. Our chemistry will not resist color introduction or walk off, as is common with other chemistry.

The colorants are micro-pigments thus will not fade. Craftsmen are certified with in-depth training. Using Grinding, Honing and Polishing equipment designed for complete concrete processing that can expose aggregate (this is not janitorial equipment). Equipment is not electric, and does not require a 3 phase hook up.

Unless specified, our installers will process the entire floor including any and all wall edges. The process is wet, maintaining ambient air quality and ensuring no dust contaminates the HVAC system. Water enables a higher quality cut to the floor. The process IS NOT opening the concrete and applying a sealer. The floors include accountability through onsite management.

Shrinkage Compensating Concrete for concrete with no joints and no curling and no shrinkage cracks. This is a unique product. We have just added a line of product for the Oil and Gas Industry.
 
Company ID: 64844 - Click Here for Full Details
Product Lines:
Plastic Injection Molding.

Thermoplastic Molded Products for all Industries, Optics and Clear Molded Parts, High Strength Mechanical Parts, High Tolerence Parts, and Insert Molding. In-House Mold Making Capabilities. 
 
Target Markets:
Electronic, Sensors, Optical, Material Handling, Automotive,Heavy Equipment, Medical, Dental, Fire Protection, Safety, General Industry. 
 
Sales Opportunity:
We are a high quality thermoplastic injection molder that has a great reputation for Servicing our customers. We have been in business for 27 years and have experienced a good growth track record. We have Openings for Reps that would like to work directly with the owners of the company.

Our Company is ISO9001:2008 Certified.
 
Company ID: 66271 - Click Here for Full Details
Product Lines:
Small Zinc Die Castings, Multi-Slide - Multi-Cavity. 
 
Target Markets:
Hardware, Locks, Automotive, Tools, Medical Equipment, Motor Components, Telecommunications, and Fasteners. 
 
Sales Opportunity:
High quality, low cost producer. Well established company. ISO 9001:2008, All manufacturing operations are in the Midwest. American Made, American Owned.
 
Company ID: 111676 - Click Here for Full DetailsNew Profile
Product Lines:
Our company provides the following services:
CNC Mill and Lathe
Waterjet cutting
MIG/TIG Welding
Tool and Die
Assembly
Protyping 
 
Target Markets:
Aircraft
Aerospace
Automotive
Medical
Construction
Marine
Military and Defense 
 
Sales Opportunity:
Our company a local full-service contract manufacturing business with over a decade of experience providing services and meeting our global customers’ metal forming needs. We have the knowledge, experience, equipment, and the right team to manage your manufacture projects. We serve Aerospace, Defense, and Aircraft tooling in addition to other industries in the local and international market.
 
Company ID: 111400 - Click Here for Full Details
Product Lines:
First Product: Educational Rotor Kite Containing a Book, Stickers, etc.
Second Product: Is a Rotor Kite but it Does Not Contain a Book. It only Contains Stickers Related to the Company for Promotion or Advertising Purposes. 
 
Target Markets:
First Product: Toy Markets, Schools.
Secont Product: Different Companies like McDonalds, Airlines, Car Companies, Schools, Banks, etc. 
 
Sales Opportunity:
This kite is a very new product, it flies very different from other kites, has very wide range of applicability. We are a family company and not concerning money, our aim is making the customer happy than make money. We are flexible and can make any changes on the product concerning company requirements. We can make any suppert our reps, as I said money is in the secon, third line for us. We can get understand each other concerning commision fees by talking together.
 
Company ID: 111222 - Click Here for Full Details
Product Lines:
You will be Selling Social Media Marketing to Companies. Social media marketing

I will help you to increase revenue by targeting the right audience at the right time. I specialize in Instagram, Snapchat, Facebook and Twitter Marketing. 
 
Target Markets:
Companies in or near Chicago. Sell to Companies such as Car Dealerships and Real Estate Agents. 
 
Sales Opportunity:
I am willing to give a commission of 40% and I will let the sales rep choose their structure of how they want to sell. The price of my service to the clients starts at $1,000 a month but could go up to $100,000 or even more per month depending what I will do for the company and how big the company is. This company is good because I have big plans for this company and a sales rep can help build the company to a new level.
 
Company ID: 96480 - Click Here for Full Details
Product Lines:
Interested in Representing a Company with Unique and Exciting Products?

We Manufacture Electronic LED Safety Cyclists Jerseys (Under Patent) LED Safety Belts and Vests for Different Users. 
 
Target Markets:
Wholesalers, Stores, Government, Airports. We can Design Any Style at very Competitive Prices. 
 
Sales Opportunity:
Our company has been in business for more than 18 years., we offer good commissions or the opportunity to become a wholesaler with us. We have a great opportunity for the right person or company who is interested in Representing us. Submit a sales inquiry to us today!
 
Company ID: 111076 - Click Here for Full Details
Product Lines:
Manufacturing and R&D Equipment for the Electronics Industry.

Specifically, Hotbar Bonders to Facilitate Fine Pitch Alignment of TAB, COF, COG, or other Flex Circuit Component Attachment to Glass or PCBs. 
 
Target Markets:
Targets would include: Engineering Personnel Responsible for Assembly of Electronics, Information Display, Flexible Circuit, and PCB.
Business Segments: Contract Manufacturers, Electronic Assembly Providers, Flexible Circuit Manufacturers, and others Related to PCB Assembly. 
 
Sales Opportunity:
Our company, located in Southern California, has been providing high quality hotbar automation equipment for the electronics assembly industry since 1980. We use a patented hotbar technology that provides direct conductive heat on contact to reflow solder or cure Anisotropic Conductive Film (ACF).

Unlike our competitors and their metal thermodes Ceramic Hotbars provide the highest degree of flatness during temperature cycles while isolating leads from incurring voltage during an attachment process. Because we understand the demanding complexity of design of new products in the ever growing electronics industry, we support all our reps with a high level of Technical Support. The commission offered is 10%.
 
Company ID: 93059 - Click Here for Full Details
Product Lines:
Multi-Spindle Screw Machine Job Shop.

Will Supply Parts Manufactured from Free Machining Carbon Steels, Alloy Steels, Free Machining Brass and Coppers, 2000 and 6000 Series Aluminum, Free Machining Bronze, some Plastics, 400 and 300 Series Stainless Steel. Low Volume as well as High Volume Runs. 
 
Target Markets:
We currently sell to the Electronic Connectors Market, Replacement, and OEM
Automotive Industry. Gas Orifice Markets, Clock and Gauge Pointer Manufacturers, Insert Molding Manufacturers,Valve Manufacturers, Music Instrument Manufacturers, Inserts for Castings, and Hydraulic Industries. 
 
Sales Opportunity:
We have some coverage in Ohio and PA all other states are open. We normally pay a 5% commission with a negotiated rate after sales have reached certain platforms. Each management representative has over 25 years experience in this field.
 
Company ID: 101103 - Click Here for Full Details
Product Lines:
Unique Selection of Products from Brand Owners looking to Access New Markets.

Some Products come from Crowdfunding Sites like Indiegogo and Kickstarter, others are Established Brands looking to Expand into New Tterritories. 
 
Target Markets:
General Retail, Hardware Retail, Boating and Marine Products and Supplies, Pet Supplies, Automotive and Aftermarket Supplies, Mobile Electronics, Smart Home Products, Robotics and Drones, Sporting Goods, Office Supplies, Clothing and Apparel, Toys, Specialty Tools, Aerospace Industry, Home Entertainment, Fitness. 
 
Sales Opportunity:
We offer Professional Sales Representatives a new smarter way to make money. You can earn commissions in two ways.

1. Earn commissions on the entire transaction made by the buyer. This means you can make commissions on all products purchased by your customers, not only the lines you rep.
2. If you know any brand owners with new products looking for distribution, you can also lock-in commissions by making a direct connection to the products you bring in. In this way, you will generate commissions every time the product is sold anywhere in the world.

• Provide Brand Owners access to new markets
• B2B sales environment
• Wide selection of products
• Verified sellers and products
• Verified buyers
• Just-in-time inventory solution for buyers
• Commissions paid on all products purchased
• Commissions paid monthly
• Create downstream income for reps
 
Company ID: 110722 - Click Here for Full Details
Product Lines:
Vacuum Heat Treating Furnaces and Automated Vacuum Furnace Systems. 
 
Target Markets:
Gears, Bearings, Automotive Transmissions, Automotive Axles, Commercial Heat Treating, Medical Devices, Consumer Tools, Industrial Tool and Die, Aerospace, Fuel Injection, Vacuum Brazing, Vacuum Carburizing, Vacuum Hardening. 
 
Sales Opportunity:
Our company has World Proven Technology in the niche vacuum furnace industry and an impressive installed base in the NAFTA region. This is a unique opportunity for a long term, exclusive agreement for equipment sales and part sales.
 
Company ID: 110532 - Click Here for Full Details
Product Lines:
Our Product is a 48 inch Long LED Shop Light that Comes with a Magnet, Chain, and 110 volt Plug.

It is Designed for Bright Light and Versatility in the Automotive Industry. There is Nothing Brighter to Compete With in the Industry. Brand New Product. 
 
Target Markets:
Automotive industry
Mobile Tool Franchisees in Automotive Industry.
Hardware 
 
Sales Opportunity:
We created our product which is used primarily in the automotive industry. It is brighter lighting than any competition. The light is an LED which can be laid on the floor to light up the entire under carriage of a truck or car. The light comes with a chain and magnet for versatility which will allow it to hang on a lift or tool box. Wrap the chain around an axle and it works great. They do not give off any heat, and they plug into 110volts.

Our product is better than any other for the following reasons:
- Brighter
- No Heat
- No battery to recharge
- Uses very little electric
- Used to See what customer is working on!
 
Company ID: 110484 - Click Here for Full Details
Product Lines:
Molding, Extrusion and Calendering Parts:
- Rubber Keypad/Assembly Keypads/Membrane Keypad
- Silicone Components for Automotive Application
- Rubber O-Ring, Seal, and Gasket
- Silicone Sheets with Different Application 
 
Target Markets:
Automotive, Medical, Electronics Fields 
 
Sales Opportunity:
We are a major silicone material distributor and also an active silicone products manufacturer Certified with ISO 9001, TS 16949, and ISO 14001. With decades of experience in the silicone field, we have the ability and capacity to provide a wide range of silicone products in different industries.

- Sample available upon request
- Training materials
- Commission: To be discussed
 
Company ID: 110463 - Click Here for Full Details
Product Lines:
We are the Manufacturer of the Investment Casting Through the Lost Wax Process.

We are Working with Varieties of Ferrous and Non-Ferrous Alloys. 
 
Target Markets:
Valves, Pumps, Firefighting, Automotive, Marine, Food Processing, Agriculture, Earth Moving Equipment, Defience, Textiles, Human Implants. 
 
Sales Opportunity:
Our company believes in integration and exploring the new opportunities if our life. We have been in this field for the past 25+ years and have a good experience in the Investment Casting. The Foundy is equipped with the state of the art facility situated at the industrial area of Shapar, Gujarat, India.

We also have inhouse testing as well as machining facility for the castings, for further clerification please submit a sales inquiry to us. We also having a good track record in terms of delivery and excellent casting soundness. We are willing to offer the commission on sales basis which will be mutually agreed upon.
 
Company ID: 110356 - Click Here for Full Details
Product Lines:
Components, Sub-Assemblies, Assemblies per Contract Manufacturing Customer Drawings and Specs Using All Types of Castings Investment, Sand, Die, Shell Moulded Castings Forging, and Machined Parts from All Types of Steel, Alloys Steels, Duplex. 
 
Target Markets:
All Types of Small and Medium Sized Customers having Requirements of Mechanical Parts in Engineering Business such as Agriculture, Automobiles, Chemicals, Food and Beverage, Hydraulics, Marine, Mining, Oil & Gas, Pumps, Solid Waste, and Recycling, Textile, Vacuum Valves, Water & Water-Waste Management. 
 
Sales Opportunity:
Commission structure will be decided with representatives mutually. We have sister companies, group companies, associated manufacturing facilities for all component manufacturing. We are a purely export focused company and customer centric approach.

One stop shop for all processes and has its advantages from in-house group companies, associated units to offer seamless full mechanical parts portfolio across all industrial segment. We have associates as our commission agents and customers outside India. We better understand preserving customer drawings, IPRs, and other important business secrets on top of high quality product, along with on time delivery, hassel free.

Prices are the best among high quality suppliers. We have the advantage of engineer product to prices and engineer prices required for quality as well. Very high qualified technological personnel are the promoters of the company. They have global experience with top ranked reputable companies from EUR and USA, while their professional employment is globally well connected.
 
Company ID: 110173 - Click Here for Full Details
Product Lines:
Lubricants, Greases. 
 
Target Markets:
Railroad Industry - Class 1 and 2. 
 
Sales Opportunity:
Our company is a manufacturer of lubricants and greases sold into the Railroad Market that is used for switches, rails, and signals. We have existing business in this market and are looking to expand outside of the east coast region. Candidate must have existing connects into the engineering departments in order to obtain material approvals Willing to establish exclusive territories for experience.
 
Company ID: 110290 - Click Here for Full Details
Product Lines:
High Efficiency & Low Noise Electric Motors and Motor Controllers.

Initially Designed for Washing Machines, Motors, and Controllers can Deliver Benefits to other Applications as well. 
 
Target Markets:
Companies in Different Industries like eBikes, Ceiling Fans, Industrial Doors, HVAC, etc. 
 
Sales Opportunity:
Ours is a New Zealand based company specializing in the design, application, and integration of high efficiency and high quality motors into appliances and other systems.

We are committed to deliver to our customers:
- Value added motor and control technology
- Fully confidential support on the development and improvement of customers products and integration with our motors and controllers.
- High quality and reliable products
 
Company ID: 110251 - Click Here for Full Details
Product Lines:
Innovative Automotive Safety Device. 
 
Target Markets:
Car Dealerships, Transportation Services, and Fleet Management Companies in the U.S. 
 
Sales Opportunity:
Are you a car enthusiast enticed by the latest technology and automobile features? Do you like meeting new people and traveling different places? Our company is seeking committed, energized auto accessory merchandising, sales representatives to market our innovative auto safety system to dealerships, transportation services, and fleet management companies in the U.S.

We are looking for individuals that possess the following qualities:
* Applicant must be people friendly and Results - Driven
* Possess strong interpersonal communication skills
* Be good at Closing deals
* Be comfortable with warm calls
* Possess strong time management skills
* Carry professional attitude and work ethics
* Be comfortable education and offering instruction on product benefits and features
* Possess a strong business acumen and a good understanding of sales/marketing environment.
* Be a quick and eager learner
* Car enthusiast a plus!

Successful candidate profile:
• High School Diploma or GED
• prior sales experience in automobile and/or automotive safety industry
 
Company ID: 88877 - Click Here for Full Details
Product Lines:
High Production Machining & Assembly Of Castings Or Forgings. (Also Entire Assemblies). 
 
Target Markets:
Original Equipment Manufacturers (OEMs) Across The United States Who Are Currently Purchasing Large Quantities Of Machined Components Overseas. 
 
Sales Opportunity:
Afraid of putting too much business into any one house because you fear losing the account to some young kid right out of college content to work for less? One of our founders started in the industry as a commissioned rep so he knows your many challenges and frustrations. We are able to launch small (10,000 to 30,000 sq. ft.) high production machining plants that are able to compete with delivered prices from 3rd world countries.

In exchange for a multi-year contract we are willing to underwrite the setting up and operating of one of these highly automated focused factories right in the immediate vicinity of the customer. The products would fall into the durable goods industry which would be families of components or assemblies that have a three or more year expected life and would be made of precision machined components made from castings or forgings (of aluminum, steel, or iron).

Each plant is a separate entity where we are able to share equity with our sales reps. Each project is funded through debentures held by accredited investors and by our customers if they desire to employ capital into these small plants (but not mandatory). This opportunity must be sold at the highest levels of decision makers due to the significant dollars involved (minimum of $2.5mm to $3mm depending on many variables to be determined).
 
Company ID: 110124 - Click Here for Full Details
Product Lines:
Lubricants 
 
Target Markets:
Entire USA 
 
Sales Opportunity:
This is an opportunity to get in on ground floor. Signing an agreement to represent the entire USA. This lubricants are better than others and design to out preform the rest. More details later.
 
Company ID: 109690 - Click Here for Full Details
Product Lines:
A Unique and Affordable Digital Signage System, with Analytics & Wireless Content Updates. 
 
Target Markets:
Furniture, Home & Gift, Appliance Retailers, All Retail, Fast Food Chains, Hotels, Motels, Dentists, Doctors, Physical Fitness Locations. Home Improvement Centers.Trade Show Display Providers & Manufacturers, Big Box Stores, Digital Signage Distributors & Retailers, Property Management Companies. 
 
Sales Opportunity:
Our product is an intelligent solution to interactive, innovative digital signage. It not only displays your advertisement, but it gives you, analytics. The analytics, tell you how many people viewed it, traffic patterns, to help in placement & giving video data, of the gender of the individuals who view it. It can hang in a window, placed on a stand, cart or table.

It can be used as an advertising tool, training tool, message board, or in unattended areas, as a silent receptionist/greeter. It is extremely mobile with easy setup; all you need is power and internet. It multi-tasks and the message can be changed wirelessly. The statistical data is stored on our Cloud and can be used for comparative analysis.

The thing that really makes it unique, it turns on as people approach, not because of motion, it recognizes shapes. It turns off when no one is near it. The recognition system will continue to record even if the screen is turned off. Digital receives 10X the eye contact of static signage.

70% unaided recall on digital media content, 79% of customers surveyed noticed the digital message, 80% increased shopping experience, 30% increased store traffic, 89% engaged, entertained, and improved experience. 2-3% on average increase in each transaction. Up to 3X sales increase on products promoted with interactive digital signage. Sales increase up to 55% on average, when adding interactive digital technologies. High Commissions paid Annuity type of program.
 
Company ID: 110106 - Click Here for Full Details
Product Lines:
Steering Wheels for the Heavy Duty Truck, AG, Construction OEM Markets. 
 
Target Markets:
Purchasing Groups Within at the OEM Level. 
 
Sales Opportunity:
Open for discussion. We manufacture in the US and in Europe. We have 60% of the marine and RV markets and are looking to expand our footprint into these new markets.
 
Company ID: 110076 - Click Here for Full Details
Product Lines:
Laser Cutting, Machining, Powder Coating.

We can Provide a Complete Part, Warehouse it, and Ship as needed. We are at the Final Stages of ISO 9001 with Design (expected in August). With Three Graduate Engineers on Staff, we are Capable of Taking Ideas, Providing Drawings, and Finished Parts via CAD/CNC. 
 
Target Markets:
Companies that Need Products to Specifications and On Time. 
 
Sales Opportunity:
We are an Achilles approved company that allows us to do business with very large companies. Many cases we ship directly to production due to our quality and delivery performance. We need help in sales and looking for someone to team up with.
 
Company ID: 110059 - Click Here for Full Details
Product Lines:
Paraffin Wax Bars.

100 year old Product. Paraffin Wax has Many Uses like Candle Making, Canning and Preserves, Prevents Rusting, Lubricating, and Cleaning. Current ong Standing Canadian Clients include Canadian Tire and Home Hardware. 
 
Target Markets:
Box Stores, Large Distributors. 
 
Sales Opportunity:
The finished product is sold in a box with 4 easily breakable bars. We intend on increasing the size of packaging in the near future. The US has many paraffin wax vendors but none have the capacity to press the wax into uniform bars.
 
Company ID: 103467 - Click Here for Full Details
Product Lines:
T-Shirts, Design Transfers, Mugs, Decals, Drink Coasters, Caution Signs, and Bikini Poster Calendars. 
 
Target Markets:
We want Reps who are Selling to distributors & retailers in All Markets and Demographics. Web and/or brick and mortar. Chain Stores, Gun Shops, Truck Stops, Novelty Stores, Rock Climbing Shops, Executive Gifts, Bars, Adult Novelty stores, Strips Clubs. 
 
Sales Opportunity:
Anyone working with babies, pets, patients, cars, sports, hunters, plumbers, painters, hazmat clean up and bartenders get it! Of course there's always the innuendo! Know an HR nightmare? Everyone does! We have gag gifts and training tools for that "special" employee, boss or co-worker. Get your distributors ready for the holidays and this bad boy!

Who remembers No Fear when it was edgy? Well we are now here! We're looking to build these brands and any reps who "get it" and know the stores and shops that will too can sign up for territories and get selling now. Sell on Wall Street, Venice Beach, or anywhere in between!
 
Company ID: 109919 - Click Here for Full Details
Product Lines:
Electric Motorbikes are Electric Bikes Made for Getting Around and Having fun.

All Terrain or for Urban Use. They are Inspired by Minibikes from the 70's. They Look and Feel like Motorcycles with the Simplicity of Bicycles. 
 
Target Markets:
Bass Pro, Cabela's, REI, LL Bean, Target, Camping World, Amazon, Gander Mountain, Walmart, Outdoors and Recreational Vehicles Retailers. 
 
Sales Opportunity:
We're a young lifestyle brand designing and manufacturing Super 73 electric motorbikes in California. Currently selling direct through our site, we are seeking highly skilled professionals that can help us get our new models into the right places for large volume sales.

We launched our first model last summer 2016 and discovered a new category of vehicles with incredible potential. By popular demand, we're launching a lower priced Motorbike retailing from $1,199-$1,499 to be able to reach the masses with margins for big box retailers. We've sold around 400 units our first year with close to a $1 million in revenue with our $2,999 model with 2 more product launches in the queue.

The general EV industry is booming:
"Electric bike market advisers eCycleElectric have concluded that the U.S. market for pedal assisted bikes could have grown year-on-year by as much as 70% in 2016."

Our demographics are 90% male:
24-39 Millennials who strive for experience, adventures, love the outdoors, having fun.
55+ Baby Boomers who ride in couples on the weekends for leisure.
 
Company ID: 109943 - Click Here for Full Details
Product Lines:
Automobile Parts such as:
Control Cable: Parking Brake Cable, Transmission Cable, Hood Cable, Accelerator Cable, Door Cable, Window Regulator Cable, Seat Cable.
Gas Spring: Hood Gas Spring (Dynamic), Trunk Gas Spring (Dynamic), Hydraulic Gas Spring, Lower Stay, Rotary Damper. 
 
Target Markets:
Automobile, Heavy Industry. 
 
Sales Opportunity:
Our company is located in YangSan, Korea and has been in business for the past 28 years. We specialize in manufacturing control cables and gas springs for the automotive industry. We are Certified in accordance with TS-16949 and ISO-14001. We have developed and supplied control cables and gas springs to Renault Samsung Motors and GM.
 
Company ID: 109824 - Click Here for Full Details
Product Lines:
Screw Extraction Pliers.

Extract Stripped Rusted Corroded Torx Security Screws, Rounded Nuts, and Bolts. High Quality Scissors for Cutting Kevlar Fabric. Cuts Kevlar Fabric, Plastic Canvas, Body Armor, Boat Sails Ropes, String Construction Nets. 
 
Target Markets:
Hospitals, Government Agencies, EMTs, Mom and Pop Tool Shops, A&P Mechanics, Automotive Mechanics, Anyone who Performs Maintenance, Uses Hand Tools, and Encounters Removing Stripped or Rusted Out Screws in their line of work. 
 
Sales Opportunity:
We make unique time-saving hand tools. We're a small minority & women owned company with certifications and a member of the SBA. We have a unique patented design that allows our products to remove stripped or rusted out screws in a faster more efficient way than the traditional methods.

Remove stripped, rusted, corroded, stuck, one-side, Torx screws, nuts, and bolts. Designed with Pliers Technology. Target screws can be extracted using top jaw or side jaw. Perfect slim nose for access confined spaces. Remove stripped, rusted, corroded, stuck, one-side, Torx screws, nuts and bolts. Designed with Pliers Technology. Target screws can be extracted using top jaw or side jaw. Perfect slim nose for access confined spaces.
 
Company ID: 109530 - Click Here for Full Details
Product Lines:
Precision Forging, Machining Components, Net Forged Bevel Gears, Hub Pully Rollers, Speed Gears, Defense Products Forged and Machined, Heat Treat Capacity Available. 
 
Target Markets:
Automotive, Off Highway, Agriculture, Defense, Railways, Oil and Gas, Aftermarket, Arms, Weapons, Hydraulics, Suspension, Metal Handle Equipment, Infrastructure, Building Materials, Mining Tools. 
 
Sales Opportunity:
We are a New established Precision Forging Company in North Carolina and have still 80 open Capacity on 5 Forge Lines, 4 Coining Presses, 23 CNC Machines, Heat Treat Furnaces, and Tool and Die Manufacturing. Our Forged Products are 30 % stronger then cut Gears and easy to sell. We are Located in North Carolina and there is a need for Forging Products in this area.
 
Company ID: 65350 - Click Here for Full Details
Product Lines:
The only All-In-One Premium Carnauba Cleaner Wax for Detailing all your vehicles. Plus 3 other products, Tire Shine, Leather/Vinyl Shine and Protectant, and The Waterless Detail Cloth.

Now, Introducing our New Brand Polish for All your Home and Auto Cleaning Projects. 
 
Target Markets:
All Retail, Commercial Users, Janitorial Supply & Cleaning Companies, Charity Fundraisers, (i.e.) B2B, B2C, Warehouse Distributors, Home Depot, Lowes, Ace, Bed Bath and Beyond, Carwashes, Used Car Dealers, Body Shops, etc. 
 
Sales Opportunity:
Since 2002, selling over 5 million cans, we have been marketing the only All-In-One Premium Carnauba Cleaner Wax through Nationwide retail demonstrations in the US. This all-in-one product replaces over 10 products in one. This product will clean and wax every outside surface of a vehicle including paint, plastic trim, glass, chrome, etc., all in one amazing product. This all-in-one wax replaces Wash and Wax, Window Cleaner, Rain Repellent (Windex/Rain-x), Bug, Tar, and Tree Sap Remover, Headlight Restorer, Oxidation Remover (polishing compound), All Wheel Cleaner, Light Scratch Remover.

Now, with the same incredible formula we have launched this Spray Polish for Home, Janitorial, and Auto, all-in-one product. The best replacement for stainless steel, granite and glass cleaner on the market. Currently, there is no product in the retail market that competes with the all-in-one capabilities of our products. We have been doing these outside retail demonstration and sales at well known retailers, such as AAFES, Wal-mart, Sam's Club, BJ's, Costco among others.

We are interested in gaining representation and inside/outside, B2B, B2C sales reps to secure ALL large and small retail, janitorial supply, cleaning companies, carwashes, used car dealers, body shops, Warehouse Distributors, etc. Please submit a sales inquiry to us to discuss how your relationships with potential wholesale customers can get this product placed with them.
 
Company ID: 109273 - Click Here for Full Details
Product Lines:
Precision Machines Parts 11" Max Diameter Specialize in Medium Volume from 1,500 pcs EAU to 100,000 pcs. 
 
Target Markets:
Engineers and Manufacturers. 
 
Sales Opportunity:
We specialize in making precision machines parts and also can offer many different ways to manufacture parts. We have 25 multiple screw machines that go up to 2-5/8" diameter and also have 7 Swiss machines that can make almost any part complete up to 1-1/4"diameter. We also have multiple lathes that have a Y axis and go up to 3" in diameter.

Our milling machines consist of Haas that have different indexers and a 5th axis. We also have a Makino hospital machine that can make almost any milling part complete. Our inspection department offers a vision system, 2 oasis's, multiple comparerators, and a Zeis scanning CMM. We believe in continual training with our employees so we can stay aggressive in multiple markets. Between our 2 building's we have 40,000 square feet.
 
Company ID: 109172 - Click Here for Full Details
Product Lines:
We have a Credit Option for Business Owners to Offer Customers who Cannot Qualify for Other Programs Due to Bad Credit/No Credit.

Customers only Need a Valid Checking Account and an ID. No Credit Check or Income Verification. Merchants get Real-Time Approval and are Funded, 100%, Within 72 hrs. 
 
Target Markets:
Auto Repair, Auto Accessory, Dental, Legal, Veterinary, Plastic Surgery, Firearms, Funeral Homes, HVAC Repair, Roof Repair, Scooter Dealers, Medical Cosmetic/Medical Spas, Medical, Appliance Sales/Repair, Home Improvement, Furniture/Bedding. 
 
Sales Opportunity:
This is a service with no competition and is a wide open market. The sales cycle is short, and there are numerous vertical markets available for our product. Our program is backed by well-known financial partners like Wells Fargo and First Data Leasing. First-year reps should make a minimum of $85K or more and can build from there. Some of our sales professionals have started out as part-time and worked into full time positions.
 
Company ID: 109153 - Click Here for Full Details
Product Lines:
We Design and Manufacture Automated Equipment for Semiconductor, Electronics, HDD, and Automotive Industries.

Our Products Range from Test Handler, Components Assembly, Laser Related Machine, and Vision Inspects System. 
 
Target Markets:
Target Customers are Engineers who are Involved in Testing, Assembly, Automation, and Processes. OEM Semiconductor Companies with its Own Products such as Analog Devices, Avago, etc. 
 
Sales Opportunity:
1. Huge requirements for automation and automated equipment in order to reduce manpower and save cost. Improve productivity and increase yield performance.
2. Good track records over twenty years of equipment building experience and good customers references.
3. Short delivery lead time and competitive pricing.
4. Online sales and technical support with quick and effective solutions to solve customer manufacturing problems.
5. Sales commission of 7% for the total contract amount. Additional 8% for service support over 12 months warranty period.
 
Company ID: 108889 - Click Here for Full Details
Product Lines:
1) Dividing Heads - For Angular Measurement of Rotating Electrical Components such as Potentiometers, Synchros, etc.
2) CNC Precision Machining - We have CNC Lathes and Mills in our Facility and Perform Machining for many Industries. 
 
Target Markets:
Aerospace, Medical Manufacturers, Medical Devices, Aftermarket Automobile Suppliers, Magnetics Suppliers. 
 
Sales Opportunity:
1) Dividing Heads - there are limited suppliers of this product and is sold around the world.
2) CNC Machining - Quality workmanship has garnered loyal customers, some as long as 25 years.

We support reps by making sure we have up to date brochures and an online presence. We guarantee our work. Each Dividing Head has a one year warranty.

Commission on Dividing Heads is 10% (product sells for $9K-$10K).
Commission for CNC Machining is 10% (jobs run from $400- $12K).
 
Company ID: 109044 - Click Here for Full Details
Product Lines:
Our Company has Several High Production Machines including Swiss Screw Machines and Hydromat Rotary Transfer Machines.

Also Several Secondary Machines with Pallets for Milling. 
 
Target Markets:
Possible Markets Include Automotive, Military, Fasteners, and Any Industries in Fluid Management. 
 
Sales Opportunity:
After 65 years and 6 acquisitions we offer a broad range of capabilities. On time delivery and quality with a record to prove it. Deal direct with president for negotiations, available all hours to support your efforts.
 
Company ID: 108663 - Click Here for Full Details
Product Lines:
Our Company is an Innovator of Workplace Mobility Solutions for many of the World’s Leading Retail and Operations Companies.

We Provide the Means to Dramatically Improve your Employee and Facility Productivity Without Major Changes to your Infrastructure, Software, or Processes. 
 
Target Markets:
Warehouses, Retail, and Manufacturing. 
 
Sales Opportunity:
We have found great success with any organization that has a warehouse. Here are just some of our customers including Amazon, Staples, Ross Stores, Caterpillar, Granite City Electric, and many more. Actual customer results include 75% reduction in overtime, 63% increase in receiving volume, and $7,500 reduction in labor cost per operator. One customer claims they are saving $11 million a year. The product and concept sells itself once contact and awareness is made with the potential customer. We have grown the business almost 30% per year here in the USA for the past 2 to 3 years.
 
Company ID: 108610 - Click Here for Full Details
Product Lines:
Memory Recorders, and Data Loggers
LCR Meters
Impedance Analyzers
Resistance Meters
Battery Testers
Electrical Safety Testers
Hipot Testers
Benchtop Digital Multimeters
AWG Generators
Demand Power Meters
Power Quality Analyzers
Current Probes
Insulation Testers
Megohmmeters 
 
Target Markets:
Motor, Data Centers, UPS, Battery, Automotive, EV, Electric Vehicles, Inverters, Electronic Research Development, Aerospace, Military, Temperature Requirements. 
 
Sales Opportunity:
We pay 10% commission and looking for manufacturer reps. Our products are easy to sell, very rugged, high quality with service, and support in the US. We are close to being number one, but need your help to get there. Our newest Rep has sold over 3 million last year. We sell Current Clamps (CT and Probes), Power Quality Analyzers, Impedance Analyzers, LCR Meters, Battery Testing Analyzers.

The Data Recorders, Strain Testing, Temperature Testing, and Handheld Recorders with multi-channel testing are unique. For example, our Data Recorders are a special "Hybrid" type Recorder with a built in Digital Scope that includes long memory. Some of our recorders can measure temperature, voltages, electrical power, and logic all in one instrument. An optional chart recorders make readings easy to understand. We even have ink pen recorders!
 
Company ID: 108568 - Click Here for Full Details
Product Lines:
Automotive Interior Trim Products that are Class "A" and Non-Class "A" Products for I/P's, Consoles, Door, and Garnish Trim. 
 
Target Markets:
Automotive OEMs and Major Tier 1 Suppliers. 
 
Sales Opportunity:
Our company is an existing Tier 1 and Tier 2 Automotive Interior Trim Supplier located within an hour of Metro Detroit. We are an injection mold supplier with capabilities to mold, paint, flock, weld, and assemble a wide range of products all under one roof.
 
Company ID: 108553 - Click Here for Full Details
Product Lines:
Hydraulic Presses, Press Brakes, Shears, and Custom Machinery.

Our Company has been in Business since 1993 with Over 5,000 Machines Deployed Throughout Europe and Latin America. 
 
Target Markets:
The target markets are: Transportation Verticals (Automotive, Aerospace, Rail), Military, and General Manufacturing of Various Materials that Require High Pressure Pressing, Stamping, Forging, Deburring, and the like. Strong Presence with the Manufacturing Sector in Coverage Areas Required. 
 
Sales Opportunity:
This is a mature business with a small number of competitive offerings. Our technology has met the quality standards of European manufacturing expectations. The price point will typically not be the lowest, nor the highest. Industry leading lead times makes this a strong rep opportunity to compete with stocking distribution and sell what the customer needs, not what is sitting in inventory.

The existing customer list is extensive. In many cases, North American locations exist that are considered customers in other countries. We are aggressively expanding our footprint and looking for highly motivated, trainable, sales professionals to join our team. Complete service, installation, and maintenance support available - agency may also provide if resources are available for training.
 
Company ID: 93901 - Click Here for Full Details
Product Lines:
Detail Cleaner that is Quick, Fast, Easy Cleaning, Saves Time, No Elbow Grease.

Removes Grease, Grime, Dirt, & Bugs. Anti-Fog Formula that Cleans & Prevents Fogging. 
 
Target Markets:
Automotive, Automotive Dealers, Motorcycle Dealers, Boat & Water Sports, Marinas, Classic Cars, ATV's, any OFF Road, Retailers, Semi Trucks, Snowmobiles, Hockey Stores, Ski, Snowboarding, Janitorial, Cleaning Companies, Welding Companies, Golf Stores & more. 
 
Sales Opportunity:
Our products sells themselves. View the video at & see all the surfaces that you can use this fantastic product on. Looking for the right sales force to take my products to the next level! Work hard & you will be successful. Volume sales, recurring sales, competitive pricing, & attractive commission!
 
Company ID: 108254 - Click Here for Full Details
Product Lines:
We Specialize in Lean Manufacturing.

The Job is Set Up Once and Left Set Up for Just In Time Issues, Reduced Set Up Charges, and Reduced Scrap. We have a 3 Machine Mazak FH-630 FMS 75 Pallet System, a 3 Machine Mazak FH-480 FMS 31 Pallet System, and a Two Machine Mazak fh-4800 FMS 17 Pallet System. 
 
Target Markets:
Aerospace, Defense, Commercial, and Medical. Will Machine Anything but Cast Iron. Complex Hog Outs is our Forte but not limited to. Extensive Knowledge in Machining Castings as well. 
 
Sales Opportunity:
We are a certified Native American, Veteran, and Service Disabled Veteran owned business. We have over 30 years of complex horizontal machining and many awards from tier 1 companies in the past. We are looking for a sales rep to help us locate work. We do not have an inside salesperson.

We used to do work for many tier one suppliers down in Florida such as Lockheed Martin, Harris Corp, Northrup Grumman, and General Dynamics to name a few. We are looking for a long term relationship with our future sales rep that will be able to get us "in the door" of many of these places. Can supply brochures and all certs upon request.
 
Company ID: 95184 - Click Here for Full Details
Product Lines:
Connectors like MIL-C-5015, MIL-C-26482, Power Connector, and Quadrax Connector, Box Assemblies, Fast Connectors. 
 
Target Markets:
Railway, Telecommunication, Shipbuilding, Industry, Aerospace. 
 
Sales Opportunity:
We are a Chinese connector manufacturer and looking for a partner to develop the US and Canadian market. The major products are MIL-C-5015, MIL-C-26482, power connectors, and quadrax connector. The key advantage is we have low volume but high mix production experience with competitive cost and also can customize product for customers. We have a R&D center in the head office located in China to provide technical support to our worldwide customers and partners. Also we can customize cable assembly to our customers.
 
Company ID: 91924 - Click Here for Full Details
Product Lines:
Pressure and Vacuum Switch Products, Pressure and Vacuum Sensor Products Using Multiple Technologies, Dial, Analog & Digital Pressure Gauges, Manometers, and Pressure Alarms.

Cable and Wire Harness Assembly, Laser Welding & Marking Services, Helium Leak Testing and Class 100 Clean Room Assembly. 
 
Target Markets:
General Industrial, Semi Conductor, Medical, Automotive, Fire-Suppression, Defense, Off-Highway, Process Control, and Alternative Energy, High Purity and Super Purity Markets. 
 
Sales Opportunity:
Our company is a highly recognized manufacturer of pressure and vacuum switches as well as pressure transducers and transmitters that supply the Fire Suppression, Medical, Semiconductor, and Military markets. We also provide solutions for Industrial applications such as Automation, Fluid Power, and Hydraulic markets.

Our entry into these markets has always been driven by our Customer’s asking for a solution to their application needs. Our company prides itself in saying yes when others say no and developing custom or semi-custom solutions to meet the needs of our Customers.
 
Company ID: 107924 - Click Here for Full Details
Product Lines:
Patented New LED Mobility Lighting Concept, Product Patented, and Produced in France. 
 
Target Markets:
There's a chance that this Mobility Lighting Concept can be Sold Everywhere there are Batteries. However our Product is Rechargeable and Gives 6 hours of Lighting. 
 
Sales Opportunity:
The chance is that a mobility lighting concept can be sold everywhere there are batteries. In all the businesses: such as Hardware, DIY, groceries, outdoor, automotive, drugstores, etc.
 
Company ID: 107864 - Click Here for Full Details
Product Lines:
We are a Manufacturer of Welding Machine, Tig, Mig, Stic, and also Accessories like Torch, Regulator, and Welding Connectors. 
 
Target Markets:
End-Users, Dealers Construction Dep. 
 
Sales Opportunity:
We are looking for someone who has great experience at selling welding machines. We offer great commission plus salary. Require someone go door to door and introduce our new brand.
 
Company ID: 107774 - Click Here for Full Details
Product Lines:
Class 5 and Class 8 Gear Shift Levers.
Engine Components
Distributor
Shift Levers
Steering and Suspension
Transmission Components
Engine Components
Miscellaneous
Shift Levers
Steering and Suspension
Transmission Components 
 
Target Markets:
Automotive, Truck both OE and Aftermarket Tier 1,2 and 3.
Defense
Agriculture
Green Tech
Aerospace
Open to New Industries 
 
Sales Opportunity:
Our company was founded in 1952 and is now located in Clinton Township, Michigan. Beginning as a small 4 man operation, Benny never imagined his dreams and ambitions would lead to a 70,000 square foot facility with more than 100 employees. In 1964 the owner's sons joined their father and today continue to strive in the competitive manufacturing environment with a vast variety of manufacturing equipment and quality products.

With our versatile manufacturing and assembling capabilities, we are able to use our innovative expertise to meet the most demanding customer requirements. Our customers include many major OEM companies in the heavy truck, agriculture and automotive markets.

One of our specialty products is the manufacturing and assembling of gear shift levers and transmission components for the Class 8 heavy duty truck market. We have dedicated work cells for this unique commodity which starts from raw materials and continues through extrusion, welding, painting and finishes with a complete assembled product.

We also have the capability to design and make our own tools, fixtures and special gauges. This allows us to meet any customer specific job requirement. It also allows us to stay competitive on price quotes by passing the savings on to our customers.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2017
LINKS | SITE MAP | TERMS OF USE