Manufacturers Reps Wanted by Nationwide Manufacturers
Manufacturers Representative & Independent Sales Representative Opportunities | Manufacturer Rep & Independent Rep Placement in All Industries & Territories
Email:  
  Lost Password
ABOUT US  |  FAQ's  |  SERVICE PROVIDERS  |  RATES  |  TESTIMONIALS  |  OUR CHARITIES  |  CONTACT US 
 
     HomeFind Sales RepsFind Product LinesSales Opportunities     
 
\Directory\Power Transmission
Sub Categories:
   Motors
   Actuators
   Bearings
   Drives
   Controls
   Gears
   Accessories
   Sensors
Click on Company ID to View Full Details
Company ID: 112384 - Click Here for Full DetailsUpdated
Product Lines:
We Engineer, Design, Integrate and Install Material Handling Solutions including Conveyor Systems, Sortation Systems, Palletizers, Vertical Lifts, Racking, Carton Flow, SW Design, WMS, and WCS Systems.

We Install Racking, Print and Apply, Carton Flow, Mezzanines, Overhead Rail, Spiral Lifts. 
 
Target Markets:
Looking for a Rep Agency who has good Contacts with DC's, Manufacturers, Retail Operations, Liquor Distributors, eCommerce Companies, Bottling Plants, etc. to Provide their Expertise in Identifying Customers for System Automation and Integration as well as other opportunities within the Prospect. 
 
Sales Opportunity:
This is a ground floor opportunity as we have never used Rep firms before and we are looking to expand on a National basis. You bring us the leads and contacts and we will take care of the design, engineering and proposal. We will personally support your efforts with a dedicated sales engineer.

We are a top 5 Hytrol partner and advisor and we are both a heavy duty SW engineering and mechanical engineering company well respected in the industry. Much of our book of business is between $100K- $2M and above depending on the application. Commission rate is 5% of invoice.
 
Company ID: 113878 - Click Here for Full DetailsNew Profile
Product Lines:
Refrigeration Retrofit Evaporator Box Equipment:
EC Motor Controllers
Programmable Motors
ASHC Controllers 
 
Target Markets:
Convenience Stores; Hospitals, Schools, Universities, Military, Pharmaceuticals, Restaurants, Smaller Grocery Chains, Funeral Homes, Government Facilities, Sporting Arenas, Hotels and Conference Centers. Any Business that Owns Commercial Refrigeration. 
 
Sales Opportunity:
The commercial refrigeration market consumes 990 Trillion BTU's and represents 20% of the world's energy production per year (information obtained from a Department of Energy Report). The technology for the boxes has not changed since the 50' & 60's and is antiquated.

Our proprietary software and equipment removed the antiquated parts in the evaporator boxes to not only save energy but provides Smart Technology on the operation and maintenance of their walk-in boxes using iPhones and smart tablets. Right now, our technology is cutting edge and the only one of its kind in the industry.

Our company will support reps in the participation of trade shows, direct mail, Web Leads, as well as speaking engagements and presentations. We train all Reps in the technologies as well as provide on-site support to clients. We offer a five (5) year continuous warranty and support on all equipment that is sold.
 
Company ID: 113584 - Click Here for Full DetailsUpdated
Product Lines:
Nano Coatings for metal parts/Stone and Wood own formulations
Unique Worldwide Anti-Corrosion and Electrical Malfunction Liquid Protector.
Glass and Solar Panels treatments. 
 
Target Markets:
Military, UAV, Drones, CCTV Cameras, AC Mining, Marine, Fishing Boats, Industry Suppliers, Solar Power Plants, Rental Machinery, Automotive Industry, Solar Panel Plants, Off Shore, Oil and Gas, Remote Controlled Vehicles, (and others). 
 
Sales Opportunity:
We produce 100% of our products . We sell in more than 15 countries with annual average turnover of $5M, including the US markets. Annual growth forecast +/-30%. Our products are being used by major companies, such aeronautical, Military, Mining, Fishing Boats and Marine.

We are seeking an independent sales representative with emphasis in the Targeted Markets. Very good customer retention and emerging markets. Unique product with no competition and extremely useful for companies. Sales literature and direct contact with owner. Video products support for demonstrations and user training. All of our partners and sales reps make the difference due to our amazing and exclusive features.

Territory exclusive will be discuss. We provide all literature and cost price samples. We are extremely well priced and exclusives. Commission targeted between 10% to 15% from direct sales and also from indirect sales of targeted market. We offer sales exclusivity on prescribed markets only (per company policies). This is a high support from the company to our Team.
 
Company ID: 111897 - Click Here for Full DetailsUpdated
Product Lines:
Main Product is OE Replacement TPMS Sensor. 
 
Target Markets:
All US Tire Dealers and ther Tire Channels, such as Discount Tire, America's Tire, etc. 
 
Sales Opportunity:
Our company is committed to providing unsurpassed quality in our product line as well as providing world class training for our customers. Since 2007 we have been in the forefront of the TPMS market as a leader in the industry. Our commitment to providing the highest technical advances in our sensor is one of the reasons that we stand out from other TPMS manufactures. This significant achievement not only shows that we have been qualified by the American Motors Industry but also has been Certified on the OE Level by such manufactures as, Toyota, Mitsubishi, and Suzuki.

Our company also is the first to have 98% vehicle coverage as well as providing a sensor that does not require a vehicle relearn procedure. In 2015 we have launched our latest product, we now have only 2 sensors in our product line that gives the ability to cover 98% of the vehicles. This second generation sensor still maintains all the protocols necessary to achieve 98% coverage as well as some new features. Commission rate started from 5~7% (Negotiable).
 
Company ID: 113837 - Click Here for Full Details
Product Lines:
Precision Tooling. Plastic Injection Components, Progressive Stamping, Punches, CNC Turning, Milling, EDM Centerless Grinding, ID/OD Grinding, Hard Turning, and Hard Milling. 
 
Target Markets:
Stamping Houses, Plastic Injection Mold Builders Air Conditioning Tooling, Fin Tooling, Chain Manufacturers, Transmission, and Gear Box Manufacturers. 
 
Sales Opportunity:
Commission Structure is up to Rep. He can bump whatever he feels is necessary.. Non Union shop, We work to very tight tolerances. Familiar with most tool steels. We are a small shop in NY state and are looking to expand our business.
 
Company ID: 113806 - Click Here for Full Details
Product Lines:
Cold Finished Carbon, Alloy, Stainless Steel & Aluminum Bars, Rods, & Wires.

Specializes in CHQ and Engineered Steel Bars. 
 
Target Markets:
Tier 1 OEM Manufacturers of Engineered Fasteners, Motors/Pumps, Valves Utilizing Engineered CHQ, SBQ Cold Finished Bars, Rods, & Wires. 
 
Sales Opportunity:
IEG is the North American operating branch of one of Southeast Asia's leading cold finishing steel mills on a mission to establish North American presence in automotive and industrial OEM markets. Our company is actively searching for sales reps with minimum 5 years industry experience in supplying to Tier 1 OEM manufacturers of fasteners and precision shafts.
 
Company ID: 110320 - Click Here for Full Details
Product Lines:
PCBs - Printed Circuit Boards
Single Side - SS, Double Side - DS, Multilayer PCB, Multilayer Boards, MLB, ML4, ML6, ML8, ML10, ML12
Thermal Management Heatsink Metal Core PCB, (Al/Cu) Multilayer Metal Core Aluminium PCB,
RF Application Boards, Rogers, Taconic for RF Amplifier, Filters & Antenna. 
 
Target Markets:
OEMs, EMS, CMS
Power Electronics
Automotive
Consumer Electronics
Lighting
Computer & Business Equipments
Defence & Aerospace
RF & Communication
Instrumentation & Medical Electronics 
 
Sales Opportunity:
Sales Reps Required to Work on Commission Basis! We are looking for "Great Sales Reps* who will work for commissions only.

Our company is a leading PCB manufacturer in India exporting PCBs to USA, Europe & Israel. We are a One Stop Solution and can support for Prototype, Quick Turn PCBs, High Mix Low, Medium or Large Volume Production of Bare PCBs. We have capabilities to manufacture PCBs up to 12 layers to very demanding specifications. We are in process to set up a sales office in US to support reps for day to day operations.

We can support for Single Side, Double Side, Multilayer, Metal Core, and RF & Comms grade Rogers PCBs. We have representatives in the US & Europe and are looking to further expand our network via representatives. High Quality PCBs and On-Time Delivery are key to our success over these years. Service you can trust.

We are looking for knowledgeable, experienced candidates or companies who can offer local support for customers and grow our business working on commission basis. Sales Representative to work to expand the existing tried and tested business and bring growth and earn commission. Interested candidates may please submit a sales inquiry to us immediately.
 
Company ID: 107098 - Click Here for Full Details
Product Lines:
Metal Bar/Section Shears for the Forging and Mass Production Industries.

We are the Only Company that Shears Metal Bars and Cross Sections such as: Flats, Angles, Extrusions, etc. with our Original Patented Tool Units. These Units are then Assembled into Economical H-Frame Presses. 
 
Target Markets:
Forging Manufacturers for Auto/Trucks, Aircraft/Aerospace, Bolts/Fasteners, Agriculture/Mining, Oil/Gas, Valves/Fittings, etc. also Metal Suppliers, Construction Angles. 
 
Sales Opportunity:
Our bar/billet shears produce non-shock, quality square faced cut bars (required in the forging industry) without saw scrap, costly saw blade replacements and in greater speed/quantities.
 
Company ID: 113093 - Click Here for Full Details
Product Lines:
Three, Four, and Five Axis Milling of Complex Parts.
3D Surfacing Capability
Turning Capability up to Ř30''
Swiss Lathe Capacity up to Ř1-1/4''
Ability to Work with Difficult to Machine Materials. Ability to Work Directly from Customer Supplied CAD Models. We are Certified to ISO9001 and AS9100. 
 
Target Markets:
We Primarily Serve the Aerospace Market. We also Serve Manufacturers of Castings, Conveyor Systems, Hydraulic Manifolds, and Small Cylinders. We Specialize in Solving Problems Caused by Difficult to Machine Materials and Developing Processes to Simplify Complex Parts. 
 
Sales Opportunity:
Our company is a clean state of the art manufacturing facility that maintains industry certifications that most other suppliers don't have. We utilize an ERP system for all job information, we maintain our cad / cam software to the latest revisions and have a knowledgeable staff to promptly interact with our customers. Our equipment is state of the art and is all less than 10 years old.

We offer quick turnaround on quotes as well as the technical expertise to be able to help our reps with the difficult questions that arise in this industry. We offer a commission based incentive package that is based on the shorter run/higher dollar value parts that we produce.
 
Company ID: 93595 - Click Here for Full Details
Product Lines:
Low to High Volume, ISO Certified Supplier of Precision Machined Components.

Processing Specialties including: CNC Swiss Turning, CNC Turning, CNC Milling, and Precision Grinding. Size Ranges up to 2.500" dia and 15" long for Turning and up to 48" x 18" x 20" Milling Capacity. 
 
Target Markets:
Firearms Industry, Medical Industry, Outdoor Related (Bicycles, Exercise, Archery, Marine), Automotive Industries, Hydraulic Pump Industry to name a few. 
 
Sales Opportunity:
Established company (1966) with vast experience in many different facets of precision manufacturing. Have experienced much growth the last 5 years and foresee much more growth with the right sales opportunities. We specialize in solving problems for customers!
 
Company ID: 110125 - Click Here for Full Details
Product Lines:
Precision Machining Services, General Machining Services, CNC Lathe, Milling Department. Metal Forms, Wire Forms, Springs, CMM Inspection and Reporting, Heat Treating, Material Certs, Surface Finishing, Plating, Anodizing, and Assembly. Specializing in Tight Tolerance, Exotic Featured Parts. 
 
Target Markets:
Aerospace/Defense, Medical Device Manufacturers, Automotive, Industrial Automation Machinery, Optical Device, and Telecom-Electronics Manufacturers 
 
Sales Opportunity:
Since 1981, SMI CA has been producing precision components in a wide range of materials including Alloy steels, Stainless Steels, Aluminum, as well as exotic material such as Titanium,Inconel using the latest in CNC Machining and manufacturing technologies. SMI CA is certified with AS9100C & ISO9001 International Quality Standard. Applications range from aerospace, defense, medical, automotive, optical device, industrial products, and telecom/electronics.

SMI CA is part of an international group (STM)focused on a development of world class manufacturing technologies. STM Group includes TOHOSEIKO, a world renowned precision spring manufacturer located in Japan. Founded in 1957 in Japan as a specialized manufacturer of springs, received high praise from the industries such as medical device, optical equipment, telecommunications equipment, industrial equipment, automotive, consumer electronics, electronic components, etc. because of its technology and quality. SMI CA is the hub of customer service, engineering, and production for the US customers.

Currently, we are looking for the rep in the west coast and the east coast. Great opportunity to be the first rep. to market our services. Our pricing is very competitive and our engineer and production team will make sure the project success. We are looking for the long term partnership with the reps and will pay commission as long as the project last. Please explain why you are interested in representing our company.
 
Company ID: 89951 - Click Here for Full Details
Product Lines:
Drop-In Replacement Medium Voltage Electric Motors from 300HP - 5,000HP.

Small Production Runs 1-100 is our Specialty. New AC/DC Synchronous Motors. These Motors are Exact Drop-In Replacement Motors for "Older" GE, Westinghouse, Siemens, etc. We Do NOT Sell Off the Shelf Motors. 
 
Target Markets:
Oil and Gas, Nuclear Facilities, Pump OEMs, Water/Wastewater, Mining. 
 
Sales Opportunity:
Our company was established in 1921. High Quality, Reasonably Priced. Large Manufacturing Capabilities. Looking for Reps that have motor sales experience only.
 
Company ID: 109588 - Click Here for Full Details
Product Lines:
Electrical Safety, Safety Consulting, Electrical Analysis, OSHA Compliance, NFPA70E, NFPA70B Compliance, Safety Training & Technical Sales. 
 
Target Markets:
All Manufacturing & Industrial Plants, Food & Beverage, Plastics Plants, Steel & Stamping Operations, Chemical Plants, Utilities, Oil & Gas Industry. Customer list includes: Disney, Amway, Kellogg's, Pepsi, Tito's Vodka. 
 
Sales Opportunity:
Wow, We're Growing!

We have an Outstanding Opportunity with Huge Earning potential. Everything is in place for Huge growth. We currently have over 670 industrial distributor locations selling our services across the United States with more to come. We need Reps in the following areas of the states: WI, upstate NY, CO, Northwest and the Massachusetts We need you today. With earnings easy from $100,000 to $250,000.

We can help build your existing business & increase your revenue with generous commission base with repeat business. This is an excellent opportunity to a firm that is ready to drive sales. We promise to make you look good! Submit a sales inquiry to us and get ready to grow!

We supply training of your sales staff, Literature and most of all excellent support to help you grow your business. We want to invest in You! Submit a sales inquiry to us you will be glad you did. You will actually be doing a service to your customers by protecting their employees from electrical incidents and reduce their insurance premiums.

Following OSHA Regulations, employers are responsible to provide a safe workplace for electricians working in their facilitates. Using NFPA70-E Standards as a guideline,while doing a electrical safety analysis of the manufacturing facility. We provide a A to Z approach our customer to comply with OSHA regulations. Over the last 10 years we have received 5 phone calls saying thank you for your services, you saved my life today.
 
Company ID: 88403 - Click Here for Full Details
Product Lines:
Electronic Components, Electronic Assembly, Electromechanical Assembly, Cables, Injection Mold Tooling, Injection Molding, Metal Fabrication, Metals, Precision Plastics. Ceramic to Metal Components, Particle Accelerators, and Associated Components, Complete Turnkey Assembly of Electronic items. 
 
Target Markets:
Automotive Manufacturers, Appliance Manufacturers, Aircraft Industry, Entertainment Manufacturers, Arms Manufacturers, Security Industry, Medical Equipment Manufacturers, Power Industries, Applied Research, and so many more. 
 
Sales Opportunity:
We seek experienced sales reps with a strong following. All areas open. All our products and services are done in our China facilities. Excellent opportunity. Products sell well. Engineering and sales support always available. Multiple sales persons the rep organization a definite plus.
 
Company ID: 110347 - Click Here for Full Details
Product Lines:
Metal, Plastic, Rubber Parts Custom Made such as Molding, Extrusions, Machining. 
 
Target Markets:
OEMs - Non-Medical Manufacturers or Government Suppliers. I.E. Automotive, Appliance. Some of our existing OEMs are Electrolux, Wilson Trailer, EZ Liner, Winnebago. 
 
Sales Opportunity:
We have many advantages for you to be successful with us. Please submit a sales inquiry us. We like to share the wealth with smart/hard workers. Our company is a very high integrity company based on Competitive commissions, and Longevity. We provide warehousing for their customers so the lead time is 1 -3 days. Exceptional QC Department, 15 Years in the Business, High Integrity, and our Customers come first. We want long term relationships, fair commissions, and commissions that do not lower as sales increase.
 
Company ID: 108721 - Click Here for Full Details
Product Lines:
Variable Frequency Drives. 
 
Target Markets:
Manufacturing, Industrial Contractors, Water/Wastewater, OEMs, HVAC, Material Handling, etc. Virtually anyplace in Industry AC Motors are Utilized. 
 
Sales Opportunity:
The RPM line of AC drives is an extremely versatile and reliable offering. It offers several distinct advantages over the competition. The RPM Controls’ drive features state of the art technology and power circuitry designed around efficient, latest generation IGBTs. This means less heat loss and higher reliability.

Instead of random spot checks, every drive is tested at 100% load before it leaves the factory. Precise vector control algorithms yield outstanding performance on even the most demanding loads. They are configured to be exceptionally intuitive and easy to program during commissioning.

While maintaining advanced feature capability for complex applications, the most common parameters are linked together in a subgroup to enable fast and efficient installations for most basic applications.Their western design addresses issues important for success in the North American market. Southern California based support helps insure prompt resolution of any technical issues.
 
Company ID: 109316 - Click Here for Full Details
Product Lines:
We are a Full Service Broaching House Specializing in Blind/Thru-Hole Broaching of Key-Ways and Splines.

We also Perform Shaping, Slotting, and Key-Seating. We Manufacture Spline Shafts, Couplings Along with any Other Parts which Require Internal Key-Ways, Splines, or Slots. 
 
Target Markets:
Target markets would be anyone in Engineering, Purchasing or Upper Management for Companies which Have their Own Product Line or Manufacture Parts in the Agriculture, Motor, Pump, Casting, Oil and Gas Markets. Also, any Machine Shop which Supplies these Companies. 
 
Sales Opportunity:
The machines we utilize are not the standard used by our competitors, they are specially designed and run 30-50% faster than your typical broaching machines which allows us to be more price competitive. We are a smaller family business which prides itself on flexibility, meaning if a customer needs a job done same day or over the weekend, we can accommodate. I would be willing to pay between 5-10% commission based on the job.
 
Company ID: 106435 - Click Here for Full Details
Product Lines:
Rack Power Distribution Unit (PDU/Power Strips).

Over 20 years of Manufacturing Experience on PDU Products which have been Traded on over 6 Continents and in over 60 countries. Our Strong Points are an Experienced R&D team, Price Competitive, Full Product Certificates, Active Marketing Actions, etc. 
 
Target Markets:
- Rack Cabinet Manufacturers
- New Data Center Project Builders/Contractors
- Data Center System Integrator
- Data Center Infrastructure Distributors
- Telecom Operators or Related Industry like Broadcasting, Finance, School, etc. 
 
Sales Opportunity:
- Complete product knowledge education
- Active and comprehensive marketing actions like global trade shows, product launches, search engine promotions, ads, etc.
- Local technical support stations in planning
- Sizable sales commissions starting from 5%
 
Company ID: 107027 - Click Here for Full Details
Product Lines:
Metal Fabrication, AWS Certified Weldments, Assemblies, CNC Machining, and Painting in Mild Steel, Stainless Steel, and Aluminum.

Our Core Business includes Small or Large, Simple or Complex Weldments, Enclosures, Electrical Boxes, Tanks, HVAC Assemblies for the Mass Transit Industry. 
 
Target Markets:
Mass Transit, Healthcare, Fast Food, Minor Capital Equipment, Food Service, HVAC, Energy, Material Handling, Pharmaceutical Industries, etc. 
 
Sales Opportunity:
We have been in business since 1974 and our clientele consists of major domestic and international customers. Our core business is metal fabrication with the capability of complete turnkey electromechanical assemblies.

Our weld certifications are: AWS D9.1, D1.1, D1.2, D1.3, D1.6, and AWS D17.2 (MIL-W-6858).

The manufacturing capabilities consist of:
- CNC Lasers
- CNC Turrets Punch Presses
- Press Brakes
- CNC Machining
- MIG/TIG Welding AWS CERTIFIED
- Spot Welders AWS D17.2 / MIL-W-6858
- Painting
- Stroke Sanding
- Assembly Area
- Kitting
 
Company ID: 90862 - Click Here for Full Details
Product Lines:
Prototype/Production of Precision Stampings, Conventional and Insert Moldings and Assembly of Sub-Components to Complete Medical and Automotive Devices.
Class 7 Cleanroom Manufacturing Area
Certified Compliant Pin
Single QMS System Covering our ISO 9001:2008, ISO 13485 and TS 16949 Certs 
 
Target Markets:
Headquartered in Emigsville, PA, with a Duplicate Facility in Hermosillo, Sonora, MX, we Service the Medical, Automotive, and Telecommunication's Markets. 
 
Sales Opportunity:
We are actively searching for an aggressive rep. or rep. group to expand our customer base across the U.S. and Mexico territories and offer extensive support.
 
Company ID: 107532 - Click Here for Full Details
Product Lines:
We are a Manufacturer of Deep Drawn metal Components as well as Flat Stampings and Progressive Eyelets.

We Specialize in many Different Grades of Stainless Steel as well as Aluminum, Brass, Copper, and many other Steel Alloys. We also Specialize in Tube Fabrication. 
 
Target Markets:
Hardware, Automotive, Electronics, Medical, and a Variety of Detonator Caps for Military Defense as well as Demolition. We also have a Medical Division that Specializes in Producing Parts that are made of many different types of tubing. 
 
Sales Opportunity:
Our company is an ISO 9001:2008 company. Our deep draw division is capable of drawing to depths up to 2.562 (.1008 mm) deep. The deep draw division also accommodates in line roll threading, bulging, and many different types of piercings. Our stamping division has capabilities to accommodate up to .100 (.0039 mm) thick material and specializes in inline tapping.

Within the Medical division, we also specialize in laser cutting, forming, welding, and many other types of processes. Our Manufacturing facility consists of twenty transfer presses and twenty four stamping presses. We have support equipment that gives us the edge on building all tools within our facility in order to capitalize on lead times as well as cost savings.
 
Company ID: 105933 - Click Here for Full Details
Product Lines:
Energy Monitoring Sensors.

We Manufacture Current, Voltage, Power, Frequency, and Power Factor Analog and Digital Transducers. We also Offer Current Transformers, Current Relays, Switches and Displays, Custom Designed OEM Units. 
 
Target Markets:
Engineers, Purchasing Agents, Utilities Companies, OEM, Distributors and End-Users. 
 
Sales Opportunity:
Our company is a privately owned business since 1986. We have over 18,000 customers in our database. Customers provide repeat buisness year after year. Our product offerings cover just about any monitoring needs including DC and if we don't have it our experienced Engineering team can custom design it. We own our own building and manufacture most products here in our St. Louis, MO. facility.

We control our own overhead and expenses to compete in almost any market. We have two SMT circuit board stuffing machines, a laser cutter and UV printer for custom labeling and packaging. Travelling with our Reps to train them and get experienced with our products is a number 1 goal to make both companies successful.

Our customer database is shared with the reps and they are treated as an extension of our sales force. Commission structure is 5% for the territory on standard parts and 10% for custom designed units. Very few house accounts in any territory, although there might be some. We are very fair about making sure our Reps are paid the money they helped earn.
 
Company ID: 103978 - Click Here for Full Details
Product Lines:
Engineered Products: Specialty Chains, Sprockets, Gears, etc.
Commodity Parts: Bearings, Seals, etc.
Control Systems & Upgrades
Machining & Fabricating
Engineers & Field Service both Electrical & Mechanical
Complete Machinery: Barge Unloaders, Railcar Dumpers, Barge Hauls, Lift Tables, & Tanks. 
 
Target Markets:
Coal Fired Power Plants
Steel Mills
Coal Terminals
Grain Terminals
Chemical Plants
Mining Industry
Manufacturing Industry
Construction Companies
Railway Industry
Winter Road Crews
Escalator Users 
 
Sales Opportunity:
There are multiple reasons why a highly motivated sales representative would want to contract with Energy Sales & Service. To start, we offer an industry competitive compensation, with our reps receiving 20% of the profit from their sales. We would also like to make it clear from the start that our commission package is not subject to a sliding scale.

We pride ourselves on being a diversified company with experience in multiple fields, as well as an extensive and varied product line. Your contract with us would include access to our Customer Support Team, Inside Sales Team, as well as current product literature. We currently have a large existing customer base, complete with contact information as well as a large lead sheet of potential customers in several available territories.

Sales representatives contracted with our company will enjoy the backing a respected industry name. The team here at Energy Sales & Service has also conducted extensive competitor market research, which allows us to offer ultra competitive pricing. Our contracted sales reps would also enjoy a relaxed atmosphere as our management is not interested in micro-managing their employees, or conducting endless employee meetings.

We do, however, offer excellent employee support and resources. Our high commission rates, paired with the high dollar value of our products, as well as continued support from our staff allows us to offer our representatives unlimited earning potential.
 
Company ID: 81991 - Click Here for Full Details
Product Lines:
Steel Llighting and Transmission Poles. 
 
Target Markets:
USA and Canada. 
 
Sales Opportunity:
Company under new and professional management is expanding its manufacturing capabilities and organizing networks for marketing and finishing of poles. Your contributions to the company's growth and success will be handsomely rewarded. All sales inquiries will remain strictly confidential.
 
Company ID: 110444 - Click Here for Full DetailsUpdated
Product Lines:
What we can Provide:
• AC & DC Motors and Motor Components
• Gear Motors
• DC Linear Actuators
• Stampings and Metal Assemblies
• Die Castings (Aluminum & Zinc)
• Screw Machine Parts
• Electrical Assemblies/Cable Assemblies 
 
Target Markets:
Typically small to medium sized OEMs, who Build Products and Use these Components. 
 
Sales Opportunity:
We provide engineering, design, sourcing, logistics, and warehousing. We utilize third party inspection services to inspect finished products and sends us a report for our approval. We have offshore production which makes products competitively priced. We offer 5% commission and no-compete protection. There is no company that offers all these benefits in one place.
 
Company ID: 113867 - Click Here for Full Details
Product Lines:
Oil and Gas Services. 
 
Target Markets:
Oil and Gas Companies. 
 
Sales Opportunity:
We want to contact American companies that need representation in Bolivia. Ours is a company of more than 40 years in Bolivia that offers its services to the petroleum companies in the areas of engineering, management of projects, and construction. Our experience is accentuated in gas plants, oil pipelines, gas pipelines, petrochemical plants, and energy providers.

Also we have realized it works with magneto telluric, prospect, and exploration petroleum. We support commercial agreements with foreign companies of prestige and take part in tenders for public and private companies. From 2016 we have added our cadre Unit of Business, which purpose is to represent prestigious signatures as being industries of teams, industrial materials, chemical products that could be sold in Bolivia under the representation of our company.
 
Company ID: 113860 - Click Here for Full Details
Product Lines:
Industrial Batch and Conveyor Ovens, plus Related Equipment.

Both Custom and Standard Industrial Ovens Used for a Wide Range of Applications including Heat Treating, Finishing, Drying, Curing, and many others. 
 
Target Markets:
Nearly Every Industry including Aerospace, Automotive, Petroleum, Composites, Finishing, Foundry, Heat Treating, Military, and others. We Do Not Manufacture Ovens for Food Processing. 
 
Sales Opportunity:
Our company is part of a large group that is the leader in batch and conveyor ovens. We have shipped over ten thousand pieces of equipment to locations all over the world. We have been designing, engineering, and manufacturing industrial ovens and related heating equipment for over 40 years, and have built a solid reputation through integrity, quality equipment and great service. We provide our sales representatives with a reliable flow of leads and pay competitive commission rates.
 
Company ID: 113824 - Click Here for Full Details
Product Lines:
Our company Manufactures Shipping Monitoring Devices that Detect G Force Shock and will Indicate when a Specific G Level is Exceeded.

We Offer Disposable Impact Indicators, Re-Usable Shock Indicators more Advanced Digital Devices that Monitor and Record Impacts and Temperature. 
 
Target Markets:
Power and Energy (e.g. Transformer Manufacturers), Aerospace, Military and Defense, Marine & Offshore, Aviation, Medical Instrument Manufacturers, Nuclear, Technology (Servers & Routers), Instrumentation, Glass Nanufacturers, and others. 
 
Sales Opportunity:
We are looking for Manufacturer Representatives to sell our products in North America. Our products are quality manufactured devices that are precise and reliable. We provide excellent compensation on the products. Our technical and sales support is excellent and responsive. We provide training on our product line and our customer service is friendly and supportive. We are also proactive marketing the pour products and have strong web/market presence.
 
Company ID: 113825 - Click Here for Full Details
Product Lines:
We Manufacture High Quality Wwitching Equipment including a Complete Range of High and Medium Voltage Disconnect Switches such as the Vertical Break,Center Break, Double-End Break, Side Break, etc. 
 
Target Markets:
Utilities, Power Plants, Manufacturing, & Process Plants. 
 
Sales Opportunity:
We have many states open for motivated technical sales representative. AR - LA - WI - MN - ND - SD - CO - UT - NV - WY- MT - ID - WA - OR - OH - WV.
 
Company ID: 113696 - Click Here for Full Details
Product Lines:
Electric Actuator (Limitorque, Rotork, EIM, etc.) Parts and Services.

Large Inventory of Spare Parts for Limitorque SM, SMA, SMC, SMB, and HBC Actuators and Gear Boxes. Shop and Field Refurbishments Services and Training. 
 
Target Markets:
Electric Generating Stations including Fossil, Oil, Gas, and Nuclear, Petro-Chemical Plants and Refineries, Pulp and Paper Plants, Water Treatment Plants. 
 
Sales Opportunity:
Our company has been in business for over 30 years providing the industries noted above with on-time, error-free cost effective actuator parts and services. We see the use of representatives as a win-win situation for the representatives to focus on sales and we will focus on providing quality services.
 
Company ID: 110419 - Click Here for Full Details
Product Lines:
Rod Ends and Spherical Bearings Made in The US.

We are a Small Manufacturer that Offers Quick Delivery on Standards and Specials. 
 
Target Markets:
Aircraft, Industrial Distributors, Race Car Builders, Packaging Equipment Users, Hydraulic Cylinder Re-Builders among others. 
 
Sales Opportunity:
We are an established company looking to grow our customer base. We have some established accounts and are looking for someone to call on these as well as establish new customers. Our company makes a high quality product and a competitive price with some of the best lead times in the industry.
 
Company ID: 110470 - Click Here for Full Details
Product Lines:
Full Line Bearings & Power Transmission Products, including Ball Bearings, Mounted Units/Insert Bearings, AG Bearings, Needle Bearings, Miniatures, Spherical Bearings, Rod Ends, Tapered Bearings, Clutch Bearings, Cam Followers, Slewing Rings, Custom Parts, Chain, Sprockets, Sheaves, Stainless Steel. 
 
Target Markets:
We focus on OEM Opportunities.Target markets include: Car Wash Equipment, Agriculture Equipment, Material Handling and Conveyor Equipment, Escalator Applications, Playground Equipment, Lift & Ergonomic Equipment, Power Tools, Automotive Components, Medical Devices, Food Processing, and more. 
 
Sales Opportunity:
To compete in today's global marketplace, companies need a partner who can provide precision bearings and components that meet quality, cost, and delivery requirements. That's why they can rely on our company. We provide high quality, competitively priced products that are backed by experienced customer service and technical support, helping to save time, money, and effort.

Our broad range of bearings and power transmission products are manufactured in ISO 9001 Certified plants, and meet or exceed AFBMA standards. Our experienced team can help select the best products for various applications, and develop a tailored stocking program to support delivery requirements. Application-specific solutions can be developed in certain situations.

As a proud member of organizations such as the Farm Equipment Manufacturers Association (FEMA) and International Car Wash Association (ICA), we collaborate with small and medium sized manufacturers to craft economic solutions to meet complex needs. All of our standard products comply with RoHS requirements restricting certain hazardous substances, contributing to the protection of human health and the environment.
 
Company ID: 113600 - Click Here for Full Details
Product Lines:
Full Line Bearings and Power Transmission Products.

Including Bearings, Chain, Sprockets, Sheaves, and Full Line Stainless Steel. 
 
Target Markets:
Original Equipment Manufacturers (OEMs) including Conveyor Manufacturers, AG Equipment, Food Processing, and more. 
 
Sales Opportunity:
Our broad range of deep groove radial ball bearings, mounted ball bearing units, spherical bearings, agricultural bearings and power transmission products are manufactured in ISO 9001 certified plants, and meet or exceed AFBMA standards. Our company is a leader in manufacturing and looking to expand our network with reps around the country.
 
Company ID: 64161 - Click Here for Full Details
Product Lines:
Leader in Re-Manufactured AC and DC Electric Motors for Forklift Trucks and all Other Components for Mobile Equipment.

New AC and DC Electric Motors and all other Components for Mobile Equipment including Lift Trucks, Agriculture, Construction, Airport, Minng and Steel Mill Equipment. 
 
Target Markets:
End Users and Dealers of: Lift Trucks, Construction Equipment, Agricultural Equipment, Ground Support Equipment, Utility Vehicles. 
 
Sales Opportunity:
Highest Commissions - above Industry Standards. 50 year Committment to the Mobile Equipment Industries. Only Material Handling AC and DC Electric Motor Re-Manufacturer with UL Recognition. Exclusive Schabmueller and Sauer Danfoss North American Representative.

Certified Re-Manufactured/Re-Engineer Center for:
Schabmueller
General Electric
Mitsubishi/Caterpillar
Clark
Linde

In-House Machine Shop
In-House Rewinding

Quality Audits by:
Schabmueller
Mitsubishi/Caterpillar
Clark
 
Company ID: 113531 - Click Here for Full Details
Product Lines:
Systems Integration, Engineering & Machine Building.

We Provide Turnkey Test System and manufacturing System Automation Development and Design. Our Experienced Engineering Team can Handle a Project from Concept through Commissioning. 
 
Target Markets:
We have Extensive Experience Building Machines and Systems for:
Light Rail Mass Transit Test Systems
Assembly & Test for Industrial Manufacturing
Defense Systems including Explosives Processing
Thermal-Fluidic Systems for High Performance Computing 
 
Sales Opportunity:
We are looking for sales representatives to expand our established & growing business. We offer the opportunity to augment existing sales pipelines with value added systems integration & machine building capability. We offer responsive sales support to get accurate quotes into your contacts hands quickly and can offer high quality, high value solutions for test automation & custom machine building. We are a National Instruments Alliance partner for test solutions.
 
Company ID: 113522 - Click Here for Full Details
Product Lines:
Mack Genuine Parts, Luberfiner, Wix, Permatex, Bosch, Federal Mogul/National, Abro, Gabriel, FJ-TECH, KLM, Spicer, WD-40, AoBest, John Deer, Caterpillar, Fram, Castrol, Hastings, SKF SCOTSEAL, etc. 
 
Target Markets:
Import/Export, Various Small Auto Shops Throughout the Country. 
 
Sales Opportunity:
Our company has been in operating in Haiti since 2014, supplying commercial truck parts to various companies throughout the country to meet the needs of their fleet vehicles. We are looking for sales reps/distributors that have experience in the Caribbean commercial truck parts market,
 
Company ID: 113472 - Click Here for Full Details
Product Lines:
We are a Manufacturer of High Performance Videoscopes, Offering the Highest Resolution Displays on the Market. 
 
Target Markets:
- Aircraft Turbine Blades for FOD.
- Helicopter, Visual Inspection of Helicopter Engines.
- Car Engines, Videoscopes for Inspection of FOD in the the Engine.
- Explosion Proof Videoscopes for Border Patrols.
- Wind Turbines, Videoscopes for Wind Turbine Gearbox Maintenance. 
 
Sales Opportunity:
A US made product made on the West Coast. A complete West Coast sales, technical and sales support. High quality product with highest screen resolution in the market. Some of the Videoscopes have a wide depth of field range. Offering competitive sales commissions.
 
Company ID: 113449 - Click Here for Full Details
Product Lines:
A Professional High Quality German Formula Line for the Automotive Industry with Many Solutions, such as the Carbon Build-Up in the Engine, Emissions, & Catalytic Converter Cleaner, Engine Flush, Oil Consumption Additive, Boat Line, Motorcycle Line, & Car Care Line. 
 
Target Markets:
Auto Parts Shops, Retailers, Big Chains, New Franchise Car Dealers. Private Labels on Products that They Use Every Day in there Repair Shops, Auto Brands Car Manufacturers. 
 
Sales Opportunity:
Professional cleaning, care, and sealing – that is what the product range of our company stands for. All articles have been developed specifically for the automobile trade and industry. Every day we try to improve our products and keep evolving to satisfy the growing demands and requirements of the national and international markets. So we can guarantee our customers the best results: Maximum efficacy and at the same time the protection of natural resources are our highest aims.

A clean affair for both sides. Because of our constant research we keep our recipes up to date, but we also test new biologically degradable substances and make them ready for the market. This way we can always satisfy the growing need of our customers and reduce the contamination of the environment.
 
Company ID: 113442 - Click Here for Full Details
Product Lines:
Custom Electrical enclosures 
 
Target Markets:
OEM'S 
 
Sales Opportunity:
Looking for reps nationwide to rep our custom enclosure line. Excellent commission structure. We build a high quality enclosures for companies with on going product lines.
 
Company ID: 113290 - Click Here for Full Details
Product Lines:
Silicone OEM Components: Keypads, Sealing, Gasket, Tubing, etc. 
 
Target Markets:
Medical, Aviation, Aerospace, Military, Electronic Devices, EMS, etc. 
 
Sales Opportunity:
We are looking for an experienced rep in mechanical components, especially in Medical, aerospace, or aviation. Anyone with the qualification, please feel free to submit a sales inquiry to us soon.
 
Company ID: 113368 - Click Here for Full Details
Product Lines:
CNC Milling Capability
16” x 12” x 10” Mill
40” x 20” x 20” Vertical Mill
22” x 22” x 26” Horizontal Mill with 4th Axis & 15,000 RPM Spindle
CNC Turning Capability
17” Diameter Max. Turn x 32” long
Dual Spindle with Live Tooling and C Axis
Saw Cutting, Manual Mill & Lathe 
 
Target Markets:
Industries that need Machined Parts such as: Aerospace, DOD, Auto Manufacturers, Racing, Heavy Equipment Manufacturers. We do Work for industries such as: NASCAR Race Teams, Daytona Prototype Racecars, Heavy Earth Moving Equipment, Utility Trailer Manufacturers, Motorcycle Race Teams, Water Pump Manufacturing, etc. 
 
Sales Opportunity:
We are a state of the art machine shop looking for a representative to generate sales of our machining services to potential customers. We need someone to sell our skills and services to industries that require our services. We work with Aluminum, aluminum bronze, stainless steel, steel, titanium, tungsten, acrylic and delrin.
 
Company ID: 112721 - Click Here for Full Details
Product Lines:
A Unique Line of Surveillance/Security Products and Solutions.

From a Bulletproof Shield that Deploys in One Second to Urban Surveillance, Land Based Surveillance, Maritime Surveillance Systems for Coastal Regions, Inland Waterways, Disaster Preparedness Planning Systems. 
 
Target Markets:
Businesses, Security Companies, Law Enforcement, Fire Departments, Schools, Colleges, Cities, States, Hospitals, Business Facilities, Airports, Bus Stations, Train Terminals, Coast Guard, Military, Harbor, Marinas, Utility Companies, Oil and Gas, Government, Border Security, Energy Farms, Ranches. 
 
Sales Opportunity:
Our surveillance products and are state of the art. We have designed solutions that are in tune with the security issues in today's world. We have a high a demand for our product and solutions and we are looking for local representation.

An integration of multi-rotor drones, fixed winged UAV, tethered drones, zoom cameras, infrared cameras, infrared radar, low light, cameras, sensors, sonar, radar, 3D mapping, robotics, recognition software, secure communications, non-lethal deterrents, data analytics and artificial intelligence, diver detection sonar or echo finder, automatic identification system (AIS) to provide complete maritime situational awareness.

The commissions are robust, we offer sales training, sales and marketing support, leads, product training, discounts on demo products and a proven sales strategy. We are looking for professional re-sellers, we offer territory exclusivity to the right individuals or companies and we advertise nationally.
 
Company ID: 113292 - Click Here for Full Details
Product Lines:
Unique LED Lighting, Super Thin Flat Panels Some with Remote Drivers, Aluminum Profiles, Tape Lights, Emergency Lighting i.e.: Remote Heads, Exit Signs, etc. 
 
Target Markets:
Specifiers, Architects, Engineers, Supply Houses, etc. 
 
Sales Opportunity:
Great opportunity to get in on the ground floor of a niche market.

Our company is proud to offer new LED options that meet your design, efficiency and budgetary requirements in ways that previous lines simply could not. Digital LED lighting is so versatile, it offers excellent possibilities, but in limited dimensions and with a significant price tag. In this rapidly developing field, we combine on-the-field electrical experience with superb engineering know-how to create better LEDs in more dimensions. We offer one of the industry’s broadest lighting portfolios for indoor commercial and institutional lighting applications.

Our recessed, surface, wraparound, outdoor and relighting LEDs are recognized for their quality, reliability and solid performance, making ours a leading brand in the lighting industry. We primarily serve lighting designers, architects, electrical contractors, original equipment manufacturers and other businesses and professionals. Born from the hands-on knowledge of an electrician, engineer and designer – all with decades in the lighting industry
 
Company ID: 113216 - Click Here for Full Details
Product Lines:
Fastener Retainers.

We Offer a new Unique Retainer System for Bolt Retention. 
 
Target Markets:
Automotive, Industrial, Defense, Aerospace, Heavy Trucks. 
 
Sales Opportunity:
We offer a new unique bolt retainer system. Our system uses a chemical bonded thermoplastic to create a soft pliable retaining ring. This ring holds the bolt in place before assembly and during transit. No tooling or equipment required, no change in torque and clamp load, harmless to engine components and fluids, precise tolerances and high visibility color.

Only several competitors in the industry and our retainer is Lower cost than anyone. Automotive Approved and Certified, ISO certified, Minority certified company (MBE). Commonly used on powertrain, body assemblies, oil pans, valve covers, alternators, generators, water pumps, electronic devices, hevac systems.
 
Company ID: 113158 - Click Here for Full Details
Product Lines:
Lubrication Pumps, Centrifugal Pumps, and Submersible Pumps. 
 
Target Markets:
Contractors and Companies. 
 
Sales Opportunity:
We design and construct automated controls systems/panels that require pre-lubrication and lubrication pumps. Or could be used for centrifugal, submersible pumps meant for oil and gas companies and contracting firms.
 
Company ID: 113114 - Click Here for Full Details
Product Lines:
Air Filters for Gas Turbines and Turbomachinery. 
 
Target Markets:
Utilities, Refineries, Pipelines, IPP, Offshore Platforms. 
 
Sales Opportunity:
Our company is a world leader in the production and development of clean air solutions for gas turbines and other turbomachinery.

We are one of the most global air filtration specialists in the world and business is co-ordinated between our own offices in Europe, America, the Middle East and the Asia-Pacific region. We have over 26 production units and R&D centers around the world. The turbomachinery auxiliary systems fabrication takes place at our own facilities in Sweden and India, or at carefully selected sub-suppliers in our global network.

Our power systems group has approximately 225 employees, with sales, engineering and project management in close collaboration. The company’s business concept is to provide customers with best-in-class clean air solutions for turbomachinery; new installations, retrofits, or aftermarket service.
 
Company ID: 113043 - Click Here for Full Details
Product Lines:
DC Motors and BLDC Motors with Sensors. 
 
Target Markets:
Automotive - Industrial. 
 
Sales Opportunity:
Since its establishment, our company, as a dedicated compact motor manufacturer, has engaged in business not only within Japan but on a global scale. This has been thanks to the support of our customers and all of our stakeholders, to whom I wish to express my deep gratitude.

The market is changing at an ever-faster rate, and market needs are diversifying.

Since the start, the fundamental mission of our company has been to develop, manufacture, and sell products based on customer needs. We will continue to actively listen to our customers, flexibly and speedily responding to changes, and providing the products and services they need, so that we can earn the even greater satisfaction and trust of our customers and become a company which others truly rely on.

Our company has also positioned increased employee satisfaction as one of its key management indices. We believe that creating a workplace where employees can actively and cheerfully operate is important to provide customers with high levels of service. The entire company is working as one to create workplace environments which are rewarding to employees, where they can work with ease and a sense of security.
 
Company ID: 111196 - Click Here for Full Details
Product Lines:
Our product is a Biometric Machine Lock and Mini PLC Device.

It is the Safest and Most Secure way to Lock your Expensive Machines and Processes from Unauthorized Use. 
 
Target Markets:
Machine Automation, Machine Security, Access Control. 
 
Sales Opportunity:
Ours is the state of the art solution for combining PLC logic with fingerprint security while maintaining a single gang NEMA wall plate profile. Three independent isolated outputs rated up to 4 amps can be programmed to control lights, motors, or just any electrical device.

The companion Manager software enables administrative access for user enrollment and PLC programming with its simple graphical time line interface. It can operate on 12-24v AC or DC. Expensive timer relays can be replaced with contactors for heaver loads and direct connection to it. Directly replaces existing CL-8 and other numeric keypads for access control.
 
Company ID: 112924 - Click Here for Full Details
Product Lines:
We Manufacture more than 2,000 SKUs for the Electrical, Plumbing, and Industrial Segments.

We Provide Casting, Machining, Stamping Operations for Diversified Alloys in Copper, Zinc, Aluminum, Steel, and are now Investing in Iron. UL & ISO 9001 Certified. 
 
Target Markets:
Large and Small Public and Private Companies in the Electrical, Industrial, Plumbing, Oil & Gas, Power Generation/Energy, and some Automotive Applications. 
 
Sales Opportunity:
We are looking for experienced sales reps that can bring in a diverse customer base in the industry sectors mentioned above. Our organization is a flat organization and you will be dealing with me and one other individual in the Company. We are looking to grow revenues of this Company by an incremental $5M to $10M within 12 months and be at that pace for the next 3 years.

The Company has a history of 30+ years as a reputed supplier for a lot of recognized names in the electrical, plumbing and industrial sectors and we would like to leverage this rich history and demonstrated success to take the Company to its next stage of growth.
 
Company ID: 112817 - Click Here for Full Details
Product Lines:
Leading Indian Manufacturer of Switchgear Products, Battery Accessories & DC Busbar Systems.

Specializing in Copper Forging, Copper Casting, Milling and Tubes, Aluminum Products. 
 
Target Markets:
Switchgear Companies, eBuilding Companies, Solar Groups, Refineries, Overhead Apparatus Companies, Server Farm Builders, Battery Companies, Caterpillar, and Mining Companies. 
 
Sales Opportunity:
The US is a $180kk market and we are the largest in the EU, Asia, and India. The ASP for copper based products is high so commissions would be great. We are looking for reps that work and sell as a Manufacturing Repetitiveness in this field. We are not a difficult sell and if you are already in the switchgear companies this is a complimentary sell.
 
Company ID: 112752 - Click Here for Full Details
Product Lines:
CNC Machining Services. 
 
Target Markets:
Engineers and Designers. 
 
Sales Opportunity:
Opportunity to help grow a new company. Owner is very family oriented and driven. Looking for help with bringing in work for shop to grow and expand all in hopes to provide a comfortable lifestyle for owner and employees.
 
Company ID: 112648 - Click Here for Full Details
Product Lines:
Our Company Manufacturers Non-Metallic Gaskets and Products: Neoprene Sponge, Neoprene/EPDM/SBR Sponge Blend, EPDM, PVC, PVC-NBR, Silicone, Viton® Sponge, Open Cell Sponge, Natural Open Cell Sponge, Open Cell Foams, Filter Foam, Convoluted Foam, XLPE, Volara®, Poron® Foam, Ensolite® Foam, Silicone, Acoustic. 
 
Target Markets:
Industries:
HVAC
Electrical/Lights
Power Generation
Transportation
Acoutics
Appliance & Consumer Electronics
Construction/Windows/Doors
Medical
Advertisers, Movies, Television 
 
Sales Opportunity:
Here is a great opportunity to work with an established company and help us grow to the next level. We are able to expand and use more of our capacity to service more customers. We have several machines that were made in-house and able to modify to customers demands. Our team has strong technical knowledge and because we service so many industries, there are always opportunities. We just don't have the sales reps to reach all these markets yet.
 
Company ID: 112480 - Click Here for Full Details
Product Lines:
We are a TS 16949 and CQI-9 Certified, Full Service Thermal Chemical Processor with Over 300,000 square feet of Floor Space.

We Provide Low to High Volume Carburize and Harden, Carbonitride, Neutral Harden, Nitride, Ferritic Nitrocarburizing, etc. 
 
Target Markets:
OEMs, Tier 1's, Automotive, Appliance, Off Highway, Heavy Truck, Lawn & Garden, Gears, Stampings, Driveline Components, etc. 
 
Sales Opportunity:
This is an opportunity to obtain financial freedom for an assertive, account manager that wants to work with a growing organization that values character and integrity.
 
Company ID: 112450 - Click Here for Full Details
Product Lines:
Electronic Contract Manufacturer Providing a Full Range of Expert Printed Circuit Board Manufacturing & Assembly Services, Cable Assembly, Box Assembly for Electronic Products.

Our Company is an AS9100 & ITAR Certified Company. We can do Proto to Full Production to Full Turnkey Solution. 
 
Target Markets:
Aerospace & Defense Industries, OEMs, Medical Device Manufacturing, Automobile Industries, Optoelectronics Motion Control, Lighting Industries, Robotics, Automation, Lab Equipment. Wherever Electronics PCBs are Used, we can Sell our Services. 
 
Sales Opportunity:
Electronics is a huge industry, Aerospace, Defense, and medical Equipment. Manufacturers outsource millions of dollars to contract and ongoing repeat orders. We pay 3-5% commission based on contract size. We help to attend trade shows and if required advance technology equipment. We will update our manufacturing with technology and market requirements. We have automatic SMT line that's capable to manufacture and do any High Technology Electronics Products.
 
Company ID: 112428 - Click Here for Full Details
Product Lines:
Industrial Grade AC UPS Systems, Rectifiers, Battery Chargers, Inverters, Semi-Industrial UPS Systems. 
 
Target Markets:
Oil & Gas, Power Generation, Refineries, Petrochemicals, Mining & Metal Industries, Transportation, Water & Wastewater Treatment Plants, Hydro, Marine, Offshore Platforms, Industrial Control Rooms, Engineering & Procurement Companies, Engineers, and Data Centers. 
 
Sales Opportunity:
We are a reputed manufacturing company since 1950s in the product line and is part of well-respected industry leader. We are currently looking for Manufacturers Rep all over Canada. We have thousands of installed base with systems of high reliability, and have service support globally. With the introduction of new system models, this is a unique opportunity for any Manufacturers Rep in industrial electrical/electronics products field. Product training is provided. Pre-sales Technical & Commercial support is provided.
 
Company ID: 110356 - Click Here for Full Details
Product Lines:
Components, Sub-Assemblies, Assemblies per Contract Manufacturing Customer Drawings and Specs Using All Types of Castings Investment, Sand, Die, Shell Moulded Castings Forging, Centrifugal Castings, Automotive Cylinder Liners and Machined Parts from All Types of Steel, Alloys Steels, Duplex 
 
Target Markets:
All Types of Small and Medium Sized Customers having Requirements of Mechanical Parts in Engineering Business such as Agriculture, Automobiles, Chemicals, Food and Beverage, Hydraulics, Marine, Mining, Oil & Gas, Pumps, Solid Waste, and Recycling, Textile, Vacuum Valves, Water & Wastewater Management. 
 
Sales Opportunity:
Commission structure will be decided with representatives mutually. We have sister companies, group companies, associated manufacturing facilities for all component manufacturing. We are a purely export focused company and customer centric approach.

One stop shop for all processes and has its advantages from in-house group companies, associated units to offer seamless full mechanical parts portfolio across all industrial segment. We have associates as our commission agents and customers outside India. We better understand preserving customer drawings, IPRs, and other important business secrets on top of high quality product, along with on time delivery, hassel free.

Prices are the best among high quality suppliers. We have the advantage of engineer product to prices and engineer prices required for quality as well. Very high qualified technological personnel are the promoters of the company. They have global experience with top ranked reputable companies from EUR and USA, while their professional employment is globally well connected.
 
Company ID: 109915 - Click Here for Full Details
Product Lines:
Printed Circuit Board Assemblies and Box Builds. 
 
Target Markets:
Design, PCB Assembly, Test, Final Box Build Assembly, and Packaging: Medical Product, Industrial Controls, Gaming, Auto Aftermarket, LED Light Boards, etc. 
 
Sales Opportunity:
Please join the professional sales team of our 34 year young. A premier SMT Printed Circuit Board Assembly manufacturer. Finding its “Roots“ as a test house for PCB assemblies. Our approach to this business is what differentiates us from the plethora of houses who claim to be Contract Manufacturers. Reps will be supported by an existing sales force of our company with a variable commission depending on the job.
 
Company ID: 98316 - Click Here for Full Details
Product Lines:
Manufacturer of Diesel Components.

Complete Line of EGT Sensors, DPF Repair Fittings, also Build Back Pressure Sensors, and Micro Components. 
 
Target Markets:
Warehouses Aftermarket Supply Chain, FMP, Eastern Auto Parts, Mom and Pop Parts Stores, O'Reillys, Carquest, Napa. Websites, XDP, Rock Auto, Autoparts Direct, etc. 
 
Sales Opportunity:
Specifically we want this rep to Introduce our Exhaust Temp sensors into the automotive aftermarket. Currently we are the only company in the aftermarket. We are a trade/manufacturing company in Kansas City, Missouri. We have been in business since 2012. We build and supply parts to dealers, fleets engine builders, and independents. We are currently designing and manufactured Temperature instruments for diesels. Looking for sales reps that have contacts in the diesel sector of the automotive aftermarket.
 
Company ID: 105932 - Click Here for Full Details
Product Lines:
We Manufacture Screen & Digital Printed: Decals, Nameplates,Labels, Overlays, Control Panels, and Caution Warning Labels.

We have capabilities in Heat Bending. We Work in the OEM and POP Markets. All of our Products are Custom to your Customer’s Needs! Build your Line with Repeat Business. 
 
Target Markets:
OEM Manufacturer's Requiring Label, Overlay, Product ID, Functional Marking, Caution Warning
Automotive Industry - Engine Labels
Restaurant Industry - Menu Boards - Counter Signage
POP Industry: Shelf Signage, Seasonal Signage, Shelf Talkers, Floor Graphics 
 
Sales Opportunity:
We offer sales commissions of 10%. We are looking for representatives looking for opportunities to increase business! We can help you build business with our company. We want to grow your existing and newly developed business by expanding profit to your bottom line. We understand what you need. We work with reps to provide a win/win.

In other words, we find companies that buy what we sell and provided you a complete kit with Companies that buy our products, you will also see what they manufacture and provide samples of our products so you are prepared for a visit. With our experience and your professional selling skills everyone succeeds!
 
Company ID: 112194 - Click Here for Full Details
Product Lines:
Solar PV Component
PV Connector
Junction Box 
 
Target Markets:
Distributors
Contractors
OEM 
 
Sales Opportunity:
Established in 1981, in Taiwan, our company has been concentrating on the Solar PV development, manufacturing and marketing. Our reputation is based on quality and exceptional customer service. Reps can depend on technical support, as well as, product samples, catalogues, website access, and much more. Our commission structure is based on quantity sold and sale price. It can range anywhere from 10-15% per sale.
 
Company ID: 112133 - Click Here for Full Details
Product Lines:
Precision CNC Machining Services, Contract Machining, Prototype Machining. 
 
Target Markets:
Other Manufacturing Companies, Government Contracts for Parts, Any Assembly Companies, Aerospace, Medical, Transportation, Automotive, and Industrial. 
 
Sales Opportunity:
We have been growing 5-15% every year since 2006, purchased state of the art equipment, train our employees and ready for more challenges. Currently, we don't have a sales rep and someone can represent us and develop great future for themselves. We have vendor numbers in the national accounts but working with few local buyers only. Reimbursement will be negotiated after initial contacts.
 
Company ID: 96402 - Click Here for Full Details
Product Lines:
Optical SFP & SFP+/QSFP+ Transceivers - from 100Mbps to 100Gbps and beyond.

Also Available: Copper SFP, 1x9, SFF Transceivers & OSA ODM Service. 
 
Target Markets:
* Telecom/Datacom - Manufacturers of Network Equipment
* Cloud Computing
* Data Center
* Industrial Automation/Communication
* Energy Management & Power Plant
* Video Surveillance
* Network Security & Firewall
* Network Interface Device
* LNB Satellite Communication & CATV DOCSIS 
 
Sales Opportunity:
We are a design and manufacturing company located in Taipei, Taiwan. We only manufacture TRx products in-house by our own production facilities (not by contract manufacturers!). We have created many successful stories in Taiwan, Japan, Europe, USA, and Canada for the past twelve years. The reason of success is because we always provide competitive pricing, high-quality, and reliable TRx products to customers. Our products are fully TAA compliant.

We differentiate ourselves from the competitors through our high-performance design and integration capabilities. With the strong faith from our successful record and core-value in the past years, we would like to invite you, a professional Rep, to help us develop US business in the designated areas for the market of Ethernet FTTX, Data Center, and LTE Mobile.
 
Company ID: 112088 - Click Here for Full Details
Product Lines:
Printed Circuit Boards Manufacturing and Assembly. 
 
Target Markets:
Nationwide 
 
Sales Opportunity:
PCB & PCBA market is booming we have local and offshore mfg services. We been in business since 1983 with 34 year experience. We pay higher commission than other PCB manufacturer with strong product support and services. We have all in house process from Design to Manufacturing and Assembly. We pay monthly commission of received funds.
 
Company ID: 112021 - Click Here for Full Details
Product Lines:
Ours is a Transformer Manufacturing Company in the USA.

We Manufacture Standard and Custom Designed Transformers like Control, Magnet Coils, Auto, Current, Power, and many More Types of Single and Three Phase Transformers.
• Custom Design Transformer
• Furnace Transformers 
 
Target Markets:
Electrical Control Panel Manufacturers
Electronics Manufacturers
Control System Users. 
 
Sales Opportunity:
Ours is a transformer manufacturing company in the USA. We manufacture standard and custom designed transformers like control, auto, current, power and many more types of single and three phase transformers using our experienced staff, latest technology, expertise in designing, manufacturing, testing, delivering, quality control, and great customer service. Product is made in USA with very very comparative price so it's good opportunity with very large market specially new technology innovation require control system across world.
 
Company ID: 111929 - Click Here for Full Details
Product Lines:
Mounted Bearings
Ag Bearings 
 
Target Markets:
Agricultural Equipments
Material Handling
Conveyors
Fitness Equipment
Food Processing Equipment 
 
Sales Opportunity:
- China-Base high quality bearings provider
- Mainly focus on OEM market based on our successful cases in the pasted 20 years.
- ISO9001 Certificated
- Advanced design as the most famous players in the world
- Approved production system including quality controlling by worldwide known companies.
 
Company ID: 111791 - Click Here for Full Details
Product Lines:
Mixing and Blending Equipment for All Process Industries, Controls, Storage Tanks, Pressure Vessels, Reactors, and Custom Fabrication. 
 
Target Markets:
Food, Pharma, Cosmetic, Adhesives, Chemical, Paint, Ink, Coatings, Wastewater. 
 
Sales Opportunity:
Established in 1842, our company manufactures a broad range of specialty mixing, blending, and dispersion equipment used in the process industries. Our equipment is used for liquid/liquid, liquid/solid, and solid/solid mixing in viscosities ranging from 1 to 10 million centipoise. We manufacture small laboratory as well as production size units having capacities up to several thousands of gallons. We operate 8 manufacturing facilities worldwide and we have over 450 employees.
 
Company ID: 99343 - Click Here for Full Details
Product Lines:
Laser Rangefinder Series:
Measure a Distance, Height or Clearance Value and Position Remote Objects along with GPS.

Laser Sensors:
Detect, Count, Trigger, Map, Profile, Scan, and Guide as well as Measure Level, Proximity, and Distance. 
 
Target Markets:
Electric Power Transmission and Distribution, Gas and Water Utilities, Petroleum Distribution, Unmanned Aerial Systems, Process Control, Factory Automation, and Intelligent Traffic Management. 
 
Sales Opportunity:
Our company is the industry-leading designer and manufacturer of field measurement and mapping laser rangefinders, industrial measurement and traffic management sensors, along with market-specific software solutions. Our Patented Technology is also found in Bushnell golfing and hunting rangefinders.

The lasers and sensors under our brand are used by professionals around the world in applications including Electric Power Transmission and Distribution, Gas and Water Utilities, Petroleum Distribution, Unmanned Aerial Systems, Process Control, Factory Automation and Intelligent Traffic Management.

Seeking long-term relationships with Manufacturers Reps for our Professional Measurement and Sensor Divisions throughout the United States and Mexico. We welcome an eager and self-motivated rep firm with experience in solution-based selling within the vertical markets listed. We have maintained consistent growth for the last ten years and desire to expand our reach through representatives who have the ability to capitalize on qualified opportunities within their territory.

Our Manufacturers Rep Package Includes:
- Technical and sales-based training time and support materials.
- Demo lasers and license keys to applicable software solutions.
- Immediate response for quotes, proposals, and sales processing.
- A dedicated Sales Manager and Inside Sales Support person.
- Customization of Sales/Marketing collateral.
- Leads from corporate national advertising, trade shows.
 
Company ID: 111679 - Click Here for Full Details
Product Lines:
Lightweight Conveyor Belting including Natural Gum Rubber, SBR (Styrene Butyl Rubber), Blue and Orange Carboxylated Nitrile, White Nitrile, and Butyl Food Grade Belts.

We also Produce Hot Stock & Water Belts Used Primarily in the Tire Manufacturing Industry. 
 
Target Markets:
Principle Market Segments include Fruit, Vegetable, Food Processing, Handling, Small Parts Handling, Package Handling, Tire Manufacturing, Specialty Coated Fabrics. 
 
Sales Opportunity:
We are a US-based manufacturer with more than fifty years of experience seeking manufacturer representatives for protected territories in Mexico and Canada. Commission rates are negotiable. We will supply you with training, marketing collateral, and belt samples to help you be successful.
 
Company ID: 110260 - Click Here for Full Details
Product Lines:
Full Line of Automation Components: Pneumatic FRL's, Valves, Cylinders, & Controls.

Rotary and Linear Precision Electrical Actuators. Process Valves Ranging from Standard Brass Body Construction to Ultra-High Purity Chemical Valves. Many Unique and Patented Products. 
 
Target Markets:
OEM Manufacturers of Automated Equipment and Large MRO Accounts with Significant New Project Potential (Food & Beverage, Chemical, Pharmaceutical, Automotive Tier 1, etc). "Crossover" Work vs. Competitors at User-Level Accounts is Not Desired. Creation of Secondary Distribution Channels Possible. 
 
Sales Opportunity:
Complete access to a vast range of products for every application. Price competitive high-performance products make value evident for every customer. Factory direct technical support and marketing collateral available. Commission structure negotiable based on experience, target market and geography.
 
Company ID: 111644 - Click Here for Full Details
Product Lines:
Network Protector Parts (Switchgear), Custom Tools, Custom Part Manufacturing (Mechanical and Electrical), General Manufacturing of Electronic Assemblies, Provide Field Service Technicians for Utility Equipment Installation, General Maintenance of Utility Equipment. 
 
Target Markets:
Electric Utilities, Railroads. 
 
Sales Opportunity:
Over 25 years in the power utilities industry with large established clients. Experience in a wide array of products. We are a small tight knit company and will do whatever is takes to ensure that reps are trained and supported. Commissions are negotiable, we Always want to create an environment where all parties are happy and prosperous.
 
Company ID: 111609 - Click Here for Full Details
Product Lines:
We Manufacture and Distribute Structural Fasteners including Anchor Bolts and Connection Bolts.

Anchor Bolts can be up to 4" in Diameter and are Cast in Concrete to Anchor a Steel Structure to a Foundation. 
 
Target Markets:
Structural Steel Fabricators, Traffic Signal and Roadway Lighting Distributors and Contractors, Bridge Contractors. 
 
Sales Opportunity:
Our products are widely used and have the potential to be six-figure, repetitive purchases. Anyone who is involved in roadway construction, intersection construction, or steel fabrication is a great target!
 
Company ID: 111604 - Click Here for Full Details
Product Lines:
PLCs, Touch Screens, Contactors, Relays, Overloads, Circuit Breakers, Mini-Circuit Breakers, Manual Motor Protectors, VFDs, and Soft Starters.

These are Low Voltage Products. Medium Voltage VFDs and Medium Voltage Soft Starters. Complete Custom Control Panels and Packaged Pump Panels. 
 
Target Markets:
Oil and Gas, Plastic OEMs, Marine, Machinery Builders, Panel Builders, Irrigation, Anything that has to do with Pumping Fluids or Solids. 
 
Sales Opportunity:
We pay you a handsome commission and give you a defined territory, plus we will give you accounts to start your business. We offer sales product training, sales help, plus we service what we/you sell.
 
Company ID: 111570 - Click Here for Full Details
Product Lines:
Our Offerings Range from Standard to Built to Spec to Custom Made, Fully Wired, and Tested Cable Harness Assemblies, Components, Fittings, Adapters, Reducers, and Enlargers for Any Thread Scenario or Situation. 
 
Target Markets:
Transit Authorities, Light Rail, Bus, Hybrid, Wind Power, Solar, OEMs, Automation, and Robotic Environments. 
 
Sales Opportunity:
Our company is the preeminent developer and provider of comprehensive wire and cable protection solutions. Customers rely on our products and services to protect electrical systems in mechanically demanding applications and harsh environments.
 
Company ID: 108589 - Click Here for Full Details
Product Lines:
Our Company Provides Custom Solutions like Rack-Mount PDUs, Modular UPS Systems, Power Metering, Power Distribution, Data Concentrators, Rectifiers, Inverters, Frequency Converters, Remote Power Monitoring, Power Monitoring, and Control.

All of our Power Electronics Solutions are Customer Specified. 
 
Target Markets:
Data Centers, Military, Rail, Solar & Wind, and Infrastructure Verticals. 
 
Sales Opportunity:
We are adaptable to your customers' application, environment, and testing needs. Nimble and quick from design to engineering to production and delivery. Service and support thru entire process. Quality derived from extensive experience, pride, and commitment to genuine care in everything we do. Training on our product offering via video conferencing. Attractive commission plan.
 
Company ID: 111461 - Click Here for Full Details
Product Lines:
Precision Parts Producer Serving OEMs. ISO Certified Supplier Producing Machined Parts for a Wide Range of Customers in Many Different Materials.

A Mix of Multi-Spindle Screw Machines as well as Swiss CNC and Secondary Production Equipment. 
 
Target Markets:
OEMs, Fastener Houses, and many Different Production Companies in Automotive, Furniture, Injection Molding, and Component Manufacturing. 
 
Sales Opportunity:
A West Michigan precision parts supplier looking for a Rep in the Eastern Michigan territory. Reporting to the Sales manager, our company uses only certified sub-suppliers for all processes required to complete parts including heat treating, grinding and finishing. We are seeking a Rep to service NEW accounts or existing accounts they may already have.
 
Company ID: 111442 - Click Here for Full Details
Product Lines:
Huge Functionality in a Tiny Form-Factor. 8 Sensors to be used as stand-alone or all together.Of the shelf integrated and certified “Hardware Ready” module, which gives you freedom from hardware development and production logistics. 
 
Target Markets:
OEM manufacturers of IoT, Wearable products, IIoT, Industrial Internet of Things. 
 
Sales Opportunity:
Our product is a low-cost IoT board targeting OEM opportunities. I am setting up a network of sales reps covering the US, Canada, and Mexico. Please submit a sales inquiry to me if you are currently selling components to OEMs and are looking to expand your portfolio into IoT boards.
 
Company ID: 111399 - Click Here for Full Details
Product Lines:
Acoustic Data Recorders
Instrumentation Data Recorders
Bit Error Rate Testers
Telemetry Data Recorders
Telemetry Interfaces
Rugged Data Acquisition
Rugged Time Servers 
 
Target Markets:
Aerospace
Defense
Energy
Industrial
Transportation 
 
Sales Opportunity:
Since 1993, Our company has been successfully developing and manufacturing data acquisition, telemetry and precision timing products and systems for the international aerospace, defense, energy, industrial and transportation markets. Recent success has included the initial sales of ship-borne acoustic data recorders to a few NATO navies in support of ASW.

There's a significant opportunity to market into the remaining NATO navies. We're looking for outside sales partners to sell our existing high-value products, and find new product opportunities for our IP (both existing and new). We have the engineering team, we just need talented and motivated salespeople to fill the pipe.
 
Company ID: 108846 - Click Here for Full Details
Product Lines:
Heat Treating Services such as Vacuum Solution Annealing, Hardening & Ageing.

Atmosphere Batch Carburizing, Neutral Hardening & Normalizing, Nitriding. 
 
Target Markets:
Services are Aimed at Metal Fabricators, Machine Shops, Job Shops, Stamping, and Tool & Die. Targeted Marketing Campaigns to Assist the Rep Agency in Selling our Services. 
 
Sales Opportunity:
Our company is currently seeking independent Sales Representatives nationwide. We are interested in working with well-experienced Representatives that have strong ties, but not limited to, the ever growing Aerospace, Energy and General Industrial markets. A successful candidate would be familiar and experienced in the following areas; • vacuum heat treating and brazing • vacuum hardening, annealing, age hardening, stress relieving and other related thermal processing services. • nickel base alloys • titanium alloys • austenitic stainless steels • PH grade stainless steels.

We want to expand our reach to the thousands of mid-sized and smaller customers requiring heat treating services. That is where you come in.

The advantages for your company:
 Easy to work with supplier
 Easy to sell basic services (no inventory requirements)
 Strong commissions
 Large and growing market

An opportunity to be one of the select few Sales Representatives in the North American market. We are selective in our appointment of Sales Representatives so the growth potential is phenomenal! Let us know if you are interested in exploring this opportunity.
 
Company ID: 111331 - Click Here for Full Details
Product Lines:
Valve Actuators. 
 
Target Markets:
Valve Manufactures, Valve Automation Centers, Valve Supply Houses. 
 
Sales Opportunity:
This actuator has been manufactured since 1968 and is on everyone's accepted vendors list 100% assemble in the USA with majority of US parts. We help our reps. every way possible, training, trade shows, print ads, literature. Very price competitive, delivery is 1 to 4 weeks. Pricing and delivery back the same day! Unheard of inside and field support. Commission paid 10 days on received monies, 8% of sale. We do all invoice and bill collecting. We give sales leads weekly, and if you choose, you can set sales calls for yourself.
 
Company ID: 111295 - Click Here for Full Details
Product Lines:
Our Manufactures include Blown Glass, LED, Crystal, Lighting Assembling, Brass.

Product Lines are Very Broad, includes Chandelier, Vanity, Ceiling Light, Pendants, Outdoor Lighting, Floor/Table Lamp, LED, Ceiling Fans. 
 
Target Markets:
We are a Lighting Manufacture Ggroup in China, Looking for Sales Reps that Target Home Furnishing Chains, Hardware DIY Chains, Track Home/Mobile Home Builders. 
 
Sales Opportunity:
We're flexible, easy working with, strong production support, complete lighting line, quality product, and yet compatible pricing, don't miss out this Good opportunity.
 
Company ID: 111257 - Click Here for Full Details
Product Lines:
Traveling Water Screens
Bar Screens
Trash Rakes 
 
Target Markets:
Power Industry
Municipal Market 
 
Sales Opportunity:
Our company is one of the leading Traveling Water Screen companies in North America. As a full service provider, we design and build new screens for raw water intake systems, inspect and rebuild every style screen, and provide consultation on how to efficiently run the screening systems to our customers.

In addition, we have completed testing on 316(b) compliance and offer multiple solutions to the Power industry. With several open territories, we are interested in talking to manufacturer's reps are have strong connections in the Power market. We have the product and expertise. Bring us your connections and value added service for a win-win for all parties.
 
Company ID: 111227 - Click Here for Full Details
Product Lines:
Protective Coatings (Predominately Paint) - the Range includes High Performance Protective Coatings from a Leading Global Manufacturer, Niche Products from Household brand Rust-Oleum, as well as our Own Light Industrial Range, which can also be Modified and Adapted to Meet bespoke Requirements. 
 
Target Markets:
Heavy Industries - including but not limited to Offshore, Oil & Gas, Fabrication, OEMs, Contractors (Flooring, Roofing, Siding), Construction, and Builders Merchants. 
 
Sales Opportunity:
We are a relatively new family owned business in TX, but with the backing and support of the wider group located elsewhere in the USA and overseas. This is a fantastic opportunity to help us break into the largest coatings market in the world, with us able to offer the niche service requirements that only a company of our size can truly offer, but with the backing of global protective coating (paint) manufacturers, to meet any specification or general coating requirement.
 
Company ID: 111151 - Click Here for Full Details
Product Lines:
Unique High Power Density Inductor and Transformers for Power Conversion, Converters, Inverters.

Game Changing Technology with Very few Competing Lines in North America. 
 
Target Markets:
High Power Conversion, Automotive (EV Charging), UPS (Uninterruptible Power Supplies), Aerospace, Military, Motor Drive & Motion Control (SSD, VFD, etc.), Renewable Energy, Micro-Grid, Battery Charging Systems, etc. 
 
Sales Opportunity:
We have existing great customers in the Pacific Northwest (OR & WA) including British Columbia, Canada; Northeast (MA, CT, NH, VT, RI, etc); Pennsylvania, NJ, VA, WV, etc; Southeast including TN, GA, NC, SC, etc.; CO, UT, NE, NV, etc. Northern California. Visit online especially our featured "high current inductors" new products.
 
Company ID: 111141 - Click Here for Full Details
Product Lines:
We have a Line of Engine Oils and Automatic Transmission Fluids. 
 
Target Markets:
Mechanic Shops
Car Dealerships
Fleets
Mobile Mechanics 
 
Sales Opportunity:
Our products are industry standards and higher. Plus they are API Certified. We offer very good commission based income depending on the amount of sales. The more we make the more you take!
 
Company ID: 111117 - Click Here for Full Details
Product Lines:
An Industry Leading Manufacturer of Standard and Custom Engineered Controls, Motor Controls, and Power Distribution Equipment for Hazardous and Non-Hazardous Environments for North America and Beyond. 
 
Target Markets:
Selling Through and Supporting Electrical Distribution. Our Products Targets include Motor Control Centers, MCC Buckets, Retro Fit MCC Buckets, Drives and Soft Starters, Combo Starters, Custom Controls, Purge Systems, Switch Racks, Panel Boards, Hazardous Location Equipment. 
 
Sales Opportunity:
Our company is an Eaton, GE, ABB, Siemens, and Emerson Partner supporting this leading manufacturer of custom engineered quick ship partner. Working with engineering firms, OEMs, oil & gas, upstream to midstream, and downstream, chemical/petrochemical.
 
Company ID: 88263 - Click Here for Full Details
Product Lines:
Carbon and Alloy Steel Forgings from 5 Pounds Minimum to 160 Pounds Maximm (10) Production Cells and Plant Wide Automated Material Handling.

Started in 1929 our company remains a debt free, family owned, and operated company. Specialize but not limiteed to Gears, Hubs, and Spindle Forgings. 
 
Target Markets:
Unlimited markets, any potential customer that uses a forged part. We currently sell to the following markets: Agriclture, Construction, Gears, Hoist/Crane, Industrial Equipment, On/Off Highway, Mechanical Power Transmission, Mining, Petrochemical, Railroad, Rock Crushing, Timer, and many others. 
 
Sales Opportunity:
Ours is an honest family run company that pays commissions in the month following shipped parts. This is not a "high tech" operation, it is a production job shop that is set up to service customers with the shortest lead times possible. Approximately 10 million pounds of steel is on the property at all times. We make new dies and samples in 5 weeks or less with production following sample approval within 2 weeks.
 
Company ID: 110850 - Click Here for Full Details
Product Lines:
Analog and Mixed Signal Integrated Circuits.

Custom, Application Specific, and Standard Catalog Products. Our Patented Technology Allows the Fastest and Lowest Risk to Production. Changes in Product can be Made very Quickly. 
 
Target Markets:
Consumer, Medical, Industrial, Automotive, Aerospace, Military. We are the Exclusive Hardware Developer and Supplier for SteamVR, the Best VR Position Tracking System currently Available. 
 
Sales Opportunity:
Ours is a fast growing mixed-signal IC company with deep roots and expertise in precision analog. Join our Sales Team with many incentives including 5% commission on NRE as well as product shipments. Design location earns 100% and product shipments are easily tracked.
 
Company ID: 106332 - Click Here for Full Details
Product Lines:
Our company Manufactures Custom designed Abrasive Grinding Wheels, Discs, and Segments.

Our Wheels are Free Cutting & Highly Efficient, Providing Prolonged Dressing Cycles, High Metal Removal Rates and Cool Cutting. 
 
Target Markets:
Concentrating on Surface Grinding, we Custom design Bonded abrasives to Meet Industry’s Needs. Our Products are Used in the Production of Automotive Parts, Bearings, Cutlery, Hand Tools, Springs, Forestry Products, and a Wide Variety of other Items. 
 
Sales Opportunity:
We are looking for Sales Representatives to market and sell our products in several regions. The first is Texas and Oklahoma,the second is California, the third is the Southwest and the fourth is Western Canada.
 
Company ID: 107977 - Click Here for Full Details
Product Lines:
We are Looking for Additional Sub-Agents to Promote Sales of our Growing Line of High-Value European OEMs.

We Sell Forming presses, Peelers, Straighteners, Shot Peen Equipment, Chip, Swarf, Coolant Equipment, and others. 
 
Target Markets:
We Focus on the Automotive Industry, Forging Industry, Steel & Energy Industries including Makers of Pipes, Tubes & Bars. Additionally we Sell to Certain Niches of General Manufacturing. 
 
Sales Opportunity:
We are a growing, forward thinking rep agency in search of sub-agents to better develop these territories. We support our agents in the field with new leads and appointment setting. Very importantly, we do not compete with our agents - we send them all leads in their territory. We are careful in choosing our principals as well as our agents. Our goal is to develop long-term, win-win relationships.
 
Company ID: 110793 - Click Here for Full Details
Product Lines:
Machined Parts from Steel, Aluminum, Brass, Stainless Steel, Copper, Plastic.
Hydraulic Manifolds
Stamped Parts
Welded Assemblies 
 
Target Markets:
Recreational Vehicle
Automotive
Marine
Hydraulics 
 
Sales Opportunity:
We are a growing company located in northern Indiana. We have expanded our machining capacity over the last 2 years. We have very competitive pricing for small to large order quantities. We have the ability to manufacture complete parts/assemblies, because of not only our machining abilities, but also our stamping and welding capabilities. Our company personnel encompass 60 years of machining and tool and die experience.
 
Company ID: 110722 - Click Here for Full Details
Product Lines:
Vacuum Heat Treating Furnaces and Automated Vacuum Furnace Systems. 
 
Target Markets:
Gears, Bearings, Automotive Transmissions, Automotive Axles, Commercial Heat Treating, Medical Devices, Consumer Tools, Industrial Tool and Die, Aerospace, Fuel Injection, Vacuum Brazing, Vacuum Carburizing, Vacuum Hardening. 
 
Sales Opportunity:
Our company has World Proven Technology in the niche vacuum furnace industry and an impressive installed base in the NAFTA region. This is a unique opportunity for a long term, exclusive agreement for equipment sales and part sales.
 
Company ID: 99189 - Click Here for Full Details
Product Lines:
Our company Manufactures and Market Electrial Wire and Cable Specializing in Low Voltage Products in the Alarm and Security Field.

Also in the Marine, Boating, and Automotive Industries. We are Offering our New Highly Sellable Coil Packs Wire Cable with Many Great Benefits to the End-Users. 
 
Target Markets:
Our market is to Cable Installers, Wholesalers, Distributors, Retailers, and Contractors. We also Offer our Products to OEMs, Utilities, and the like along with B2B sales. 
 
Sales Opportunity:
Our company is looking for highly motivated sales reps and distributors for is low voltage wire and cable products. We are able to offer any sales assistant,collateral and tech consolation when needed. We have a powerful sales tool, being able to offer purchase financing to the customers even to stocking distributors those who qualify.

This program is a great benefit to reps for there commission to be paid quickly as all orders that go through are prepaid no wating for the invoicing and bill being paid, are commission are out by the fifth of the month. Our commissions are base 15% of all sales made by Rep. monthly. We offer residual sales.
 
Company ID: 76546 - Click Here for Full Details
Product Lines:
Industrial Power Transmission Equipment such as Gears and gearbox repair. These lines offer a high margin sales opportunity with healthy commission rates. 
 
Target Markets:
Mostly Industrial manufacturers: Plastics, cement, beverage, food, steel, paper, etc. Anyone who is using power transmission equipment to manufacture products. 
 
Sales Opportunity:
We are one of the few Gearing/Gearbox repair and replacement facilities that can manufacture all their own part needs. We have nationally signed deals with Siemens (Flender) which will open doors for reps. We have excess production capacity, a solid inside sales support team. What we Do NOT have is established reps to help communicate our existence to the prospect base. We need 3-5 established reps in their own fields who we will train to add out services to your basket.
 
Company ID: 68742 - Click Here for Full Details
Product Lines:
Large Diameter Bearing Repair & Custom Manufacturing up to 11 feet in Diameter. 
 
Target Markets:
Heavy Construction Equipment Manufacturers, Rebuilders, Rental Companies, Cranes, Excavators, etc. Industrial Applications including Many Types of Large Rotating Equipment. Steel Mills, Paper Mills, Bottling, Marine. Gearbox Repair. Oilfield Drilling Companies, and OEMs. Oilfield Equipment Repair Companies. 
 
Sales Opportunity:
We are a new company with extensive expertise in manufacturing and repairing large diameter ball and roller bearings up to 11 feet in diameter. One of only a handful of companies in the world can provide the type of service that we offer. Truly a niche industry with high value products. We have one of the largest diameter manufacturing capacities in North America. Our services typically save our customers about 50% of buying new so new prospects are very happy when they discover our services.
 
Company ID: 110600 - Click Here for Full Details
Product Lines:
Green sand Brass and Bronze Castings.

High Speed Automatic Molding Facility with Open Capacity. Leaded and Non-Leaded Castings. ISO Reg QMS. Lean Facility Adept at Small and Large Quantity. 
 
Target Markets:
Valve Manufacturers, Water Meter Manufacturers, Electrical Component Manufacturers, Pump Manufacturers, Fire Protection, 
 
Sales Opportunity:
130 year old Brass and Bronze foundry seeks to fill open capacity. Service oriented, high speed, low lead time facility in South Eastern PA. Mature ISO QMS. Skilled in manual to automatic molding tooling conversions and leaded to non-lead conversions. Extremely customer focused and responsive.
 
Company ID: 110572 - Click Here for Full Details
Product Lines:
We have a Proprietary Tool Design that Allows us to Sell High Quality Injection Molded Prototypes to Customers of Various Industries.

The Rapid Prototype Segment of our Business has been the Core, however we have Added Small Volume Production to our Offering. 
 
Target Markets:
We currently sell to the following markets:
Small Engine
Appliance
Automotive
Plumbing

We are interested in selling to these additional markets:
Medical
Aerospace
LED
Caps and Closures

Most of our Success comes when Linking our Engineers with the Engineering Team of the OEM. 
 
Sales Opportunity:
We are a small organization and only 2.5 years old. We have a team of young and talented engineers who are excited to grow in this industry. Our team is talented and exciting to work with. We are looking for dynamic growth opportunities and are excited to expand. Reinvestment in technology is the cornerstone of our business plan and we want to change the way the OEM world thinks of prototypes.

We are looking for dynamic team members that could open doors to new business opportunities and that would like to be a part of new and different manufacturing strategies.

Our focus is on technology and automation meaning our pricing is globally competitive and we do not lose many opportunities we come across. Our primary obstacle is managing growth, and that is why we are looking to add some strategic partners who understand how to grow effectively. We are not looking to be "all things to all people." We know our sweet spot, and that is where we want to grow.

We are excited to find partners who share in this vision and want to be a part of a growing and dynamic business. The commission structure would be discussed off line. However, we feel that our offer is more than competitive based on market data we have reviewed.
 
Company ID: 35090 - Click Here for Full Details
Product Lines:
Drive Reduction Gears, Brake Gears for Industrial, and Mobile Equipment. 
 
Target Markets:
South Africa and the rest of Africa. 
 
Sales Opportunity:
Basic salary and commission. We carry a line of products from a manufacturing company that has been in business for over 25 years. The quality and the standard is of the highest in the Industry.
 

 

 


ABOUT SSL CERTIFICATES
Canandaigua Chamber of Commerce

 

© Manufacturers-Representatives.com 2018
LINKS | SITE MAP | TERMS OF USE